21 Shallow pot magnets
|
|
|
- Heather O’Neal’
- 6 years ago
- Views:
Transcription
1 21 Neodymium Neodymium / Samarium Cobalt 80 C 180 C 80 C 80 C 80 C 200 C Ferrite 80 C 220 C (Inox) 80 C 200 C 80 C 220 C (Inox) 80 C 220 C (Inox) 200 C AlNiCo 500 C * * Size / material / magnetization / coating / working temperature / after drawing... Edition:
2 , extra strong d1x90 NdFeB, Plastic materials, Soft iron d zinc coated, with drilling and lowering imensions Materials Stock no. Temperature *Lift Weight ±0.2mm d d1 ± 0.5 max. C N g M743C N35 M742C N35U M752C N35 M743C N35U M753C N35 M744C N35U M754C N35 M745C N35U M755C N35 M746C N35U M756C NdFeB, Plastic materials, Soft iron d1x90 d zinc coated, with drilling and lowering imensions Materials Stock no. Temperature *Lift Weight Coating ±0.2mm d d1 max. C N g M N38 M NiCuNi N38 M NiCuNi N35 M NiCuNi N35 M NiCuNi N35 M NiCuNi N35 M NiCuNi N35 M NiCuNi N35 M NiCuNi 21-2
3 , extra strong L N35, Plastic materials, Soft iron zinc coated, with spigot M imensions Thread Materials Stock no. Temperature *Lift Weight ±0.2mm L ±0.4 M max. C N g M N35 M N35 M N35 M N35 M N35 M N35 M
4 , extra strong L NdFeB / SmCo, Plastic materials, Soft iron zinc coated, with insert nut M d imensions Thread Materials Stock no. Temperature *Lift Weight ±0.2mm d l L M max. C N g M743A N35 M738A SmCo M490A N35 M739A SmCo M489A N35 M740A SmCo M491A N35 M741A SmCo M492A N35 M742A SmCo M495A N35 M743A SmCo M496A N35 M744A SmCo M494A N35 M745A SmCo M497A
5 L F 24/16, Plastic materials, Soft iron Example: 60 N holding force is reduced by 200 C to 38 N zinc coated ** Stainless steel case Inox Suitable to fulfil hygienic requirements, outstandingly resistant against chemicals and also suitable for galvanic applications. M d M320A-80 imensions Thread Materials Stock no. Temperature *Lift Weight Remarks d±0.2 l L M max. C N g F 24/16 M100A zinc coated F 24/16 M100A zinc coated F 24/16 M160A zinc coated F 24/16 M160A zinc coated F 24/16 M200A zinc coated F 24/16 M200A zinc coated F 24/16 M250A zinc coated F 24/16 M250A zinc coated F 24/16 M250A-I inox** F 24/16 M320A zinc coated F 24/16 M320A zinc coated F 24/16 M320A-I inox** F 24/16 M360A zinc coated F 24/16 M360A zinc coated F 24/16 M400A zinc coated F 24/16 M400A zinc coated F 24/16 M400A-I inox** F 24/16 M470A zinc coated F 24/16 M470A zinc coated F 24/16 M500A zinc coated F 24/16 M500A zinc coated F 24/16 M500A-I inox** F 24/16 M570A zinc coated F 24/16 M630A zinc coated F 24/16 M630A-I inox** F 24/16 M800A zinc coated F 24/16 M1000A zinc coated l L ± / / / / / / / / / / /
6 F 24/16, Plastic materials, Soft iron Example: 60 N holding force is reduced by 200 C to 38 N zinc coated imensions Materials Stock no. Temperature *Lift Weight l max. C N g M360B-80 * * F 24/16 M100B F 24/16 M160B F 24/16 M160B F 24/16 M200B F 24/16 M200B F 24/16 M250B F 24/16 M250B F 24/16 M320B F 24/16 M320B F 24/16 M360B F 24/16 M360B F 24/16 M400B F 24/16 M400B F 24/16 M470B F 24/16 M470B F 24/16 M500B F 24/16 M500B F 24/16 M570B F 24/16 M570B F 24/16 M630B F 24/16 M630B F 24/16 M800B F 24/16 M800B F 24/16 M1000B * elivery (until stocks are exhausted) l ± / / / / / /
7 F 24/16, Plastic materials, Soft iron d2x90 d1 Example: 60 N holding force is reduced by 200 C to 38 N t zinc coated imensions Materials Stock no. Temp *Lift Weight Remarks ±0.2 d1 ±0.25 d2 ±0.5 t max. C N g M200C F 24/16 M200C zinc coated F 24/16 M200C zinc coated F 24/16 M250C zinc coated F 24/16 M250C zinc coated F 24/16 M250C-I inox** F 24/16 M320C zinc coated F 24/16 M320C zinc coated F 24/16 M320C-I inox** F 24/16 M400C zinc coated F 24/16 M400C zinc coated F 24/16 M400C-I inox** / / /-0.2 ** Stainless steel case Inox Suitable to fulfil hygienic requirements, outstandingly resistant against chemicals and also suitable for galvanic applications. Reference: For the fastening with screws IN ISO 14581, use type M200C-200 etc. 21-7
8 F 24/16, Plastic materials, Soft iron d2 d1 Example: 60 N holding force is reduced by 200 C to 38 N zinc coated M630C-80 imensions Materials Stock no. Temp. *Lift Weight Remarks +0.3/-0.1 d1 ±0.2 d2 +0.5/-0.2 max. C N g F 24/16 M500C zinc coated F 24/16 M500C zinc coated F 24/16 M500C-I inox** F 24/16 M630C zinc coated F 24/16 M630C-I inox** F 24/16 M800C zinc coated F 24/16 M800C zinc coated ** Stainless steel case Inox Suitable to fulfil hygienic requirements, outstandingly resistant against chemicals and also suitable for galvanic applications. Edition:
9 F 24/16, Plastic materials, Soft iron Values (10 N = ~1kg) L2 (L1) L3 Example: 60 N holding force is reduced by 200 C to 38 N G M zinc coated imensions Thread Materials Stock no. Temperature Lift Weight ±0.1 L1 L2 L3 ±0.5 M max. C N g F 24/16 M F 24/16 M F 24/16 M F 24/16, Plastic materials, Soft iron Values (10 N = ~1kg) Example: 60 N holding force is reduced by 200 C to 38 N zinc coated imensions Thread Materials Stock no. Temperature Lift Weight ±0.1mm M max. C N g / F 24/16 M / F 24/16 M / F 24/16 M / F 24/16 M / F 24/16 M / F 24/16 M M handle M MT
10 AlNiCo 43/5, Soft iron olding point N6 Values (10 N = ~1kg) blue zinc coated d1 d elivered with pol plate R M132 M133 / M134 imensions Materials Stock no. Temperature Lift Weight ±0.1mm d d1 R max. C N g AlNiCo 43/5 M AlNiCo 43/5 M AlNiCo 43/5 M Edition:
in hard ferrite K0554 in hard ferrite K0555 in NdFeB K0556 Page 855 Pot magnets K0557 Page 856 Flat pot magnets K0558 Page 857 Button magnets K0559
Magnets 849 Product overview Magnets Round holding magnets (round bar grippers) in AlNiCo with fitting tolerance K0545 Flat gripper with through hole in hard ferrite K0554 Round holding magnets (round
OPERATION MANUAL MIDISTIRRUS VP 706F Series Magnetic Stirrer
TECHNICAL NOTE 335 OPERATION MANUAL MIDISTIRRUS VP 706F Series Magnetic Stirrer Power Switch Speed Control Knob RPM Display VP 706F-3 MidiStirrus Magnetic Stirrer with speed control and RPM display 9823
Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable
REAMERS Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable the ultimate reference book is here... BLACK BOOK The ultimate reference book:
UTS HE / UTS-B HE. Metallic Magnetic Drive Process Centrifugal Pumps. UTS-B Close Coupled Execution. Pompe S.P.A.
UTS HE / UTS-B HE Metallic Magnetic Drive Process Centrifugal Pumps Metallic Magnetic drive Horizontal - Single Stage - Process Centrifugal pumps Materials : AISI 316 (1.4408) Close-coupled and End-suction
UTS HE / UTS-B HE. Metallic Magnetic Drive Process Centrifugal Pumps. UTS-B Close Coupled Execution. HE: High Efficiency. Comply to : 2006/42/CE
UTS HE / UTS-B HE Metallic Magnetic Drive Process Centrifugal Pumps Metallic Magnetic drive Horizontal - Single Stage - Process Centrifugal pumps Materials : AISI 316 (1.4408) Close-coupled and End-suction
Articlenumber Description/Dimensions Tractforce Weight gr. Moq POTMAGNET FLAT D10X4.5 MM POTMAGNET FLAT D13X4.
PERMANENT POT MAGNETS PRODUCTLIST ISO 9001 and ISO 14001 Certified Version 1.0 Construction: flat 31.001 POTMAGNET FLAT D10X4.5 MM 4 2 100 31.002 POTMAGNET FLAT D13X4.5 MM 10 3 100 31.003 POTMAGNET FLAT
ETS. Metallic Magnetic Drive Centrifugal Pumps ETS 50 WITH MOTOR. Pompe S.r.l.
ETS Metallic Magnetic Drive Centrifugal Pumps Metallic Magnetic drive Horizontal - Single Stage - Centrifugal pumps Sub-ISO designed Materials : AISI 316 (1.4408) Close-coupled execution ETS 50 WITH MOTOR
Bonded versus Sintered Interior PM Motor for Electric and Hybrid Vehicles
! "# " Bonded versus Sintered Interior PM Motor for Electric and Hybrid Vehicles A. FONSECA and Ch. CHILLET ICEM 2002, Brugge, Belgium, August 2002 $ # Objective Comparison of Bonded and Sintered IPM Motor
Silencer Series Brushless DC Motors
Silencer Series Brushless DC Motors Medical and Commercial / Industrial TYPICAL APPLICATIONS Medical equipment - handheld devices, drills and saws Robotic systems Test and measurement equipment Pumps Scanners
CHAPTER 1 INTRODUCTION
1 CHAPTER 1 INTRODUCTION 1.1 ELECTRICAL MOTOR This thesis address the performance analysis of brushless dc (BLDC) motor having new winding method in the stator for reliability requirement of electromechanical
Silencer Series Brushless DC Motors
Silencer Series Brushless DC Motors Medical and Commercial / Industrial TYPICAL APPLICATIONS Medical equipment - handheld devices, drills and saws Robotic systems Test and measurement equipment Pumps Scanners
5/6 and 7/8 Series T-A Holders
5/6 and 7/8 Series T-A Holders L4 Thread to BSPT & ISO 7-1 G D1 L5 L2 L1 D Helical d Design L3 5/6 Series Flanged Straight Shank Available Ex-Stock Holder Reference Number Holder Morse Taper Per ISO 296
New Tool Ref Length (mm) Body Length (mm)
4 Series T-A olders Thread to BSPT & ISO 7-1 G L5 L4 L2 D1 D L1 Flanged Straight Shank elical Fluted Design L3 Available Ex-Stock GEN3SYS older Reference Number older Flute D L1 L2 L3 L4 L5 D1 G * Drill
PERMANENT MAGNETIC COUPLINGS
PERMANENT MAGNETIC COUPLINGS GMDO-00970 11/08 Metau Engineering srl Page 1 of 10 General description The GMDO is a permanent-magnetic coupling that transmits torque through magnetic forces between the
UTN-L / UTN-BL I frame
UTN-L / UTN-BL I frame Lined Magnetic Drive Process Centrifugal Pumps UTN-BL PFA CLOSE COUPLED EXECUTION Plastic and Fluoroplastic Lined Magnetic drive Horizontal - Single Stage - Process Centrifugal pumps
Advantages of a Magnetically Driven Gear Pump By Steven E. Owen, P.E.
Advantages of a Magnetically Driven Gear Pump By Steven E. Owen, P.E. Introduction Before considering a magnetically driven pump for use in a fluid system, it is best to know something about the technology
Page 1. Design meeting 18/03/2008. By Mohamed KOUJILI
Page 1 Design meeting 18/03/2008 By Mohamed KOUJILI I. INTRODUCTION II. III. IV. CONSTRUCTION AND OPERATING PRINCIPLE 1. Stator 2. Rotor 3. Hall sensor 4. Theory of operation TORQUE/SPEED CHARACTERISTICS
Data Sheet PM Generator Kit version K535S-4-11 K535S-4-12 K535S-4-14 K535S-4-17 K535S-4-22
Data Sheet PM Generator Kit version -11-12 -14-17 -22 HIGH THERMAL CLASS HIGH EFFICIENCY RELIABILITY DESIGNED AND MANUFACTURED IN FRANCE OPTIMISED INTEGRATION HIGH QUALITY SAMARIUM COBALT MAGNETS This
Level indicators, screw plugs
Level indicators, screw plugs 885 Product overview Level indicators, screw plugs Oil level gauges K0443 Plastic plugs K0452 Oil level gauges K0444 Page 888 Aluminium plugs K0453 Page 894 Oil level sight
Magnetic Shock Absorber for Two Wheelers
Magnetic Shock Absorber for Two Wheelers Malunjkar N.G. 1, Kute G. B. 2, Pawar S.S. 3, Kanawade S.B. 4, Satpute.M.B 5, Kotkar S.S. 6 1 Student, Mechanical Engineering, AVPoly, Maharashtra, India 2 Student,
SYNCHRONOUS MOTOR DESIGN AND ANALYSING THE OUTPUT CHARACTERISTICS MIOR AHMAD FAIZ BIN RIZA
SYNCHRONOUS MOTOR DESIGN AND ANALYSING THE OUTPUT CHARACTERISTICS MIOR AHMAD FAIZ BIN RIZA This thesis is submitted as partial fulfillment of the requirements for the award of the Bachelor of Electrical
Introduction to the level switches technology. J.Jumeau
Introduction to the level switches technology J.Jumeau 20121030 P 1/6 If the level measurement, especially for meteorological purposes seems to date back to the 4th or 5th century BC in India, the development
VIKING SG SERIES SEALLESS MAG DRIVE PUMPS
SERIES SG-04, -05, -07, -0, -4 (Cast Iron) Section 34.3 Page 34.3. OPERATING RANGE: SG Pumps (Cast Iron Mag Drive) and SGN (Ductile Iron Mag Drive) Displacements No. 23 SG and 7 SGN 0.06 to 90 (SG) and
Body Length (mm) New Tool Ref Length (mm)
3 Series olders Thread to BSPT & ISO 7-1 G L5 L4 L2 & GEN2 D1 D Flanged Straight Shank older Reference Number older Type Flute Type elical Fluted Design L3 L1 Available Ex-Stock D L1 L2 L3 L4 L5 D1 G *
OPERATION MANUAL MiniStirrus MAGNETIC STIRRER VP 706B-3. Speed Control Knob Power Switch
OPERATION MANUAL MiniStirrus MAGNETIC STIRRER VP 706B-3 TECHNICAL NOTE 212 Horizontal Stir Deck Vortex Stir Deck Speed Control Knob Power Switch Fig. 1 VP 706B-3 MiniStirrus Magnetic Stirrer shown with
27 Magnetic armatures
27 Magnetic armatures Magnetic door locks Magnetic door locks Magnetic door locks Sandwich magnets Special-purpose magnetic door locks ounter-sunk magnetic door locks Magnetic catches screwable / lockable
No clips required for this panel system
ROOFING S SERIES 1000, 1100 & 1101 ABOUT SPACING... This guide is intended to provide you with sufficient information so that you may choose the appropriate clip for our metal roof system. We have purposely
Permanent Magnet Machines for Distributed Generation: A Review
Permanent Magnet Machines for Distributed Generation: A Review Paper Number: 07GM0593 Authors: Tze-Fun Chan, EE Department, The Hong Kong Polytechnic University, Hong Kong, China Loi Lei Lai, School of
Hall-Effect Vane Sensor CYHME56L
INTRODUCTION Hall-Effect Vane Sensor CYHME56L Hall-Effect Vane Sensor CYHME56L is designed to work in the conditions of automobile environment. The device is produced in compliance with the international
Normally-open. Normally-open
Series BMF 07 Series BMF 07 BMF 07 PNP Normally-open BMF 07K-PS-C--S49- BMF 07K-PS-C-- Non-contact, wear-free piston sensing Insensitive to contamination Piston sensed through the cylinder wall Can be
Below, you can see the warning symbols used throughout the manual and their meaning.
FMI60201 Frameless motors INTRODUCTION FMI-series frameless motors by Rozum Robotics are designed to provide motion as part of a motion system. Available in a range of sizes (dia. 40, 50, 60, 75 mm), FMI
SERENO
--------------------------------------------------- Sound attenuators for circular ducts ---------------------------------------------------------------------- FUNCTION is a circular sound attenuator for
NEODYMIUM MAGNETS SUSPENSIONS FOR MECHANICAL SYSTEMS OF THE VEHICLE
ACTA TECHNICA CORVINIENSIS Bulletin of Engineering Tome IX [2016], Fascicule 4 [October December] ISSN: 2067 3809 1.Marian MITROI, 2. Anghel CHIRU NEODYMIUM MAGNETS SUSPENSIONS FOR MECHANICAL SYSTEMS OF
Aqueducts Irrigation Water distribution Industrial applications APPLICATION DATA
NOCCHI NRB STANDARDIZED CLOSE COUPLED CENTRIFUGAL PUMPS (2-4 POLE) RUGGED AND RESISTANT, WIDE RANGE Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 The electric pumps
The information contained in this document is the property of Meggitt Sensing Systems and is proprietary and/or copyright material.
The information contained in this document is the property of Meggitt Sensing Systems and is proprietary and/or copyright material. This information and this document may not be used without the express
PUMP TYPE SERIES SLM AVP ACCORDING TO API 685
Production range pumps: Pumps with magnet drive E Chemical centrifugal pumps according to DIN EN E Centrifugal pumps according to ANSI B. E Centrifugal pumps for refinery and petrochemical applications
ENHANCEMENT OF WIND TURBINE ACCELERATION USING MAGNETIC ACCELERATING UNIT
ENHANCEMENT OF WIND TURBINE ACCELERATION USING MAGNETIC ACCELERATING UNIT 1 S. RANALKAR, 2 NUPUR SUBHEDAR, 3 DINESH SAWALE MIT College of Engineering, Pune Email: smitranalkar@gmail.com, nupur.rs@gmail.com,
Compressed air to
G G A S F J 2 N/ S/F Specifications escriptions Cylinder bore size Working fluid mm Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke length mm Rod
FLOAT LEVEL SWITCHES Vertical and horizontal models For OEM applications
7 ULTIMHEAT FLOAT LEVEL SWITCHES Vertical and horizontal models For OEM applications The professional solution: an extended, rational, and consistent range of products Technical catalogue for R&D department
Illustrated Parts Guide DSD EDGE 120VAC. Page 1 of 32
Illustrated Parts Guide DSD EDGE 120VAC Illustrated Parts Guide Page 1 of 32 This document is designed to provide a quick reference to the major replacement parts and components for the DSD EDGE. Parts
Vehicle Performance. Pierre Duysinx. Research Center in Sustainable Automotive Technologies of University of Liege Academic Year
Vehicle Performance Pierre Duysinx Research Center in Sustainable Automotive Technologies of University of Liege Academic Year 2018-2019 1 Lesson 1: Power sources 2 Outline MOTORIZATION CHARACTERISTICS
ATLANTIC PLASTICS is a company of. UPE Multi Diameter Wide tolerance Couplings and Flange Adaptors
ATLANTIC PLASTICS is a company of UPE Multi Diameter Wide tolerance Couplings and Flange Adaptors The UPE MultiDiameter range of wide tolerance couplings and flange adaptors can be used for almost any
ANALYTICAL DESIGN OF AXIAL FLUX PMG FOR LOW SPEED DIRECT DRIVE WIND APPLICATIONS
ANALYTICAL DESIGN OF AXIAL FLUX PMG FOR LOW SPEED DIRECT DRIVE WIND APPLICATIONS K.Indirajith 1, Dr.R.Bharani Kumar 2 1 PG Scholar, 2 Professor, Department of EEE, Bannari Amman Institute of Technolog
Hall-Effect Vane Sensor CYHME301S
INTRODUCTION Hall-Effect Vane Sensor CYHME301S Automotive Shaft Position Monitoring Sensor CYHME301S is designed to work in the conditions of automobile environment. The device is produced in compliance
NRB CENTRIFUGAL PUMPS WITH BASE-PLATE AND COUPLING. NORMALIZED DIMENSIONS DIN UNI EN733
NRB CENTRIFUGAL PUMPS WITH BASE-PLATE AND COUPLING. NORMALIZED DIMENSIONS DIN 5 - UNI 77 - EN7 99 NRB HORIZONTAL CENTRIFUGAL PUMPS WITH BASE-PLATE AND COUPLING (2 AND POLES) NRB pumps, centrifugal single
Series GJ. Magnetic Drive Gear Pump. Product Data Sheet
Product Data Sheet Micropump pumps deliver exceptional pumping performance for any high-precision application. These compact magnetically driven gear pumps feature a cavity style design with dynamic seals
New. Axle Spindles. Universal Tie Plates. Tie Plates. Axle Tie Plate Kits. Includes: nut, washer and cotter pin.
Axle Spindles Spindle Bearing Description Surface Part # 1-1/4 x 7 1 80055 1-1/4 x 7 (a) 1-1/16 80060 1-3/4 x 8-1/4 1-1/16 x 1-3/8 80235 2 x 8-1/4 1-1/16 x 1-3/8 80325 Eliminator, 1,750# (b) 80324 Nut/Washer/Cotter
FPK 02 AP280. Pressure Line High Pressure Filters In-Line up to 420 bar. Mix&Match to Get What You Need
FPK 02 AP280 Pressure Line High Pressure Filters In-Line up to 420 bar Mix&Match to Get What You Need Donaldson's Mix&Match system provides the great performance and functional advantages of custom-engineered
High Performance Machine Design Considerations
High Performance Machine Design Considerations High Performance Machine Design Considerations Abstract From Formula One race cars to consumer vehicles, the demand for high performing, energy efficient
An Advanced Compressor for Turbo-Brayton Cryocoolers
An Advanced Compressor for Turbo-Brayton Cryocoolers R.W. Hill, J.K. Hilderbrand, M.V. Zagarola Creare Inc. Hanover, NH 03755 ABSTRACT Future space-borne infrared sensor missions will require reliable,
CAST IRON THREADED FITTINGS
q IGUR 59 Size lack NPS N NPS N NPS N in mm in mm in mm in mm in mm in mm lbs kg /4 8 /6 7 /6 7 /6 22 /8 29 /8 29 /8 29 0.57 0.26 /2 5 /2 5 /8 0 /6 7 /6 7 /4 9 /8 29 /8 29 /8 29 0.57 0.26 /4 20 /6 22 /6
MarStand. Indicator Stands, Comparator Stands, Run out Testing Instruments
+ MarStand. Indicator Stands, Comparator Stands, Run out Testing Instruments Indicator Stands MarStand 815 GN With Cast Iron Base MarStand 815 MA / 815 MB / 815MG / 815 P With Magnetic Base 8-2 8-3 Post
Magnetic Torque Coupling FEA Example
Magnetic Torque Coupling FEA Example Title: Date of Issue: August 12 th, 2015 Author: Description: FEA Product Example Showcasing Common Options Kevin Kurtz (k.kurtz@quadrantmagnetics.com) Example Finite
Brushless Torque Motors
HT Series High Torque Brushless Torque Motors High Torque Density, Sinusoidal BEMF, Frameless Allied Motion s HT (High Torque) series of frameless brushless torque motors are available in nine diameters
INTRODUCTION WARNING SIGNS AND THEIR MEANINGS
INTRODUCTION FMI-series frameless motors by Rozum Robotics are designed to provide motion as part of a motion system. Available in a range of sizes (stator dia. 41, 51, 75 mm), FMI motors are suitable
Catalogue Hall Effect Vane Sensors
Catalogue Hall Effect Vane Sensors Copyright 2012, ChenYang Technologies GmbH & Co. KG All rights reserved. No part of this catalogue may be reproduced, stored in a retrieval system or transmitted in any
4 01 ta l o g u e 2 Ca P R i c e L I S T
Catalogue 2014 The Complete Product Range The compression fittings: Our Gebo Quick the universal compression fittings are available for steel pipes of 1/2" to 2" diameter, for black steel pipes of 20 mm
MOTOR SPEED PRODUCT LINE: CAST IRON MAG DRIVE PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
MOTOR SPEED PRODUCT LINE: SERIES 895 Section 1443 Page 1443.1 Issue B TBLE OF CONTENTS Features & Benefits...2 Standard Materials of Construction...2 Key...3 Cutaway View & Pump Features...3 Specifications...4
OPERATION MANUAL MiniStirrus MAGNETIC STIRRER/HEATER VP 706B-4H
OPERATION MANUAL MiniStirrus MAGNETIC STIRRER/HEATER VP 706B-4H TECHNICAL NOTE 275 Horizontal Heat & Stir Deck Power Switch (in back) Programmable Temperature Control Heater Control Switch Speed Control
Mustang GT Splitter Bracket Kit M-17A626-MB INSTALLATION INSTRUCTIONS
!!! PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION!!! Caution: If you are not confident that you can complete the installation safely, have it completed by a certified technician!
Screw-on Dead Lock MAS 1074
Screw-on Dead Lock MAS 1074 Cylinder nickel-plated brass, reversible key made from nickel silver Rear plate and front plate are brass, brushed Connecting wood screws are nickel-plated brass 1 rosette type
MEIR 2017 PRODUCT CATALOGUE
MEIR IS AN AUSTRALIAN COMPANY THAT SPECIALISE IN THE DESIGN AND MANUFACTURE OF PREMIUM MATTE BLACK TAPWARE WITH AN EMPHASIS ON MODERN DESIGN AND CLEAN LINES With the assistance of leading Australian architects,
MPPT Solar Charger With Constant Current Driver
KMPA200JU SERIES MPPT Solar Charger With Constant Current Driver Professional for the solar street light system MPPT efficiency 99.9% Constant current driving power: 100W(12V), 200W(24V) 3 Year Warranty
[ Only Quality produces Quality ]
![[ Only Quality produces Quality ]](/thumbs/96/126544186.jpg "[ Only Quality produces Quality ]")
[ Only Quality produces Quality ] [ W e r k s t a t t - u n d M o n t a g e e i n r i c h t u n g e n ] Assembly tables Assembly trolleys Compressors Tooling elumatec GmbH & Co. KG >Pinacher Straße 61
Box Contents. 1.) Bumper 2.) Side Bumper Brackets 3.) Vertical Bumper Plate 4.) Lower Bumper Weldment
Installation Manual 2 Box Contents 1 3 2 4 5 6 7 (Images not shown to scale) 1.) Bumper 2.) Side Bumper Brackets 3.) Vertical Bumper Plate 4.) Lower Bumper Weldment 5.) Side Bumper Weldments 6.) Side Strap
Lateral parallel hand Double acting. Operational stroke length: 20, 30, 40mm. 980m/s2
FH0 G G B H2 LB2 N/ S/F Specifications Size Cylinder bore size mm Actuation Working fluid Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke length mm
space and army Fuel/oil level. Camera shutter control ATEX (explosive atmospheres). Advertising panel Level Presence Speed Clearance Safety
Magnetic sensors Magnetic proximity sensors We are the experts!!! If you are looking for position, presence, level or speed detection, then we will be able to offer a solution from our range of magnetic
ov-shoulder_screws_divider - Updated Shoulder Screws
ov-shoulder_screws_divider - Updated - 09-01-2017 Shoulder Screws Product Overview & Shoulder Bolts Steel shoulder screws These are our least expensive option. They are produced to ISO 7379 standards.
LIMITED ANGLE TORQUE MOTORS
LIMITED ANGLE TORQUE MOTORS Limited Angle Torque Motors H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion (
The Big Picture. Title Here. Putting the Magnet Market Trends Together. Author Venue Date. Steve Constantinides. Orlando, Florida, February 8, 2018
The Big Picture Title Here Putting the Magnet Market Trends Together Author Venue Date Steve Constantinides Orlando, Florida, February 8, 2018 Slide 1 Preface World Population by Region Region Population
MEIR 2017 PRODUCT CATALOGUE
MEIR IS AN AUSTRALIAN COMPANY THAT SPECIALISE IN THE DESIGN AND MANUFACTURE OF PREMIUM MATTE BLACK TAPWARE WITH AN EMPHASIS ON MODERN DESIGN AND CLEAN LINES With the assistance of leading Australian architects,
Industrial vacuum cleaners
Power, simplified PRODUCT FACTS Reliability, power and simplicity for this industrial vacuum designed for the mechanical sector, in particular for the collection of chips mixed with oil. 2 or 3 kw power,
CONFIGURATION OF CABLE SUPPORT SYSTEMs
CONFIGURATION OF CABLE s CABLE TRUNKING Page 4 - page 7 CABLE TRAY Page 8 - page 11 CABLE LADDER Page 12 - page 14 3 SS249/ IEC 61084 COMPLIED STEEL SURFACE CABLE TRUNKING CEE PRODUCT CODE SS-CEE 6 3 (#)
B G SPIRAL BEVEL GEARBOXES BG SPIRAL BEVEL GEARBOXES
BG 1 SPECIFICATION GENERAL Spiral bevel gearboxes BG incorporate the most modern advances in bevel gearbox design and construction. These gearboxes offer an extensive range of ratios together with an excellent
Product note Low voltage flameproof motors for underground mining
Product note Low voltage flameproof motors for underground mining Our customers value us most for the high quality of products, reliability, safety and excellent engineering solutions. We have now expanded
Powerful, durable and quick to mount. Magnetic and cylinder sensors from ifm electronic.
Powerful, durable and quick to mount. Magnetic and cylinder sensors from ifm electronic. Magnetic sensors, cylinder sensors www.ifm.com/gb/cylindersensors fluid sensors and diagnostic systems position
SPECIFICATION DATA. PIPE COVERING PROTECTION SADDLE #70 (1" Insulation) # 94/95 # 93 COVERING (LBS.) 3/4 1 9/ /16 2 1/2 7/ /16 5 3/8
PIPE OVERING PROTETION SALE #70 (1" Insulation) 3/4" through " arbon Steel omplies with MSS SP- and MSS SP-9 (Type 39). esigned to protect pipe insulation from crushing, enter rib starts at " IP IRON PIPE
Magnetic Stirrer POWER DIRECT. Operating Manual Issue
Magnetic Stirrer POWER DIRECT TM Operating Manual 50108683 Issue 02.2007 2007 Thermo Fisher Scientific Inc. All rights reserved. DURAN is a trademark of SCHOTT AG. All other trademarks are the property
Liquid filled Thermometers
Liquid filled Thermometers Description and general specifications Liquid filled contact thermometers Operating instructions and maintenance Finished product quality control tests 02 02 05 06 1 Description
FLOAT LEVEL SWITCHES Vertical and horizontal models For OEM applications
7 ULTIMHEAT FLOAT LEVEL SWITCHES Vertical and horizontal models For OEM applications The professional solution: an extended, rational, and consistent range of products Technical catalogue for R&D department
PIPE NIPPLES. Welded Pipe Nipples - Black & Galvanized. q Approved q Approved as noted q Not approved. Standard Schedule 40, XH Schedule 80
Welded Nipples - Black & Galvanized Standard Schedule 40, XH Schedule 80 q FIG. 9: Standard Black Schedule 40 q FIG. 8: Extra Heavy Black Schedule 80 q FIG. 4: Standard Galv. Schedule 40 q FIG. 42: Extra
INDEX. Chapter1 1. A. Jet diffusers 1. Jet diffuser...: AJD-P
Chapter1 1 INDEX A. s 1....: AJD-P...11.1 Standard sizes...11.1 Fixing details...11.2 Panel arrangement...11.2 How to order...11.2 B. Air flow data 1. at o o position...: Tab: 11.1 (A)...11.3 2. at o position...:
240% 19% reduced. Compact Slide. MXH Series. Improved by up to. With new high rigidity linear guide. 369g. ø6, ø10, ø16, ø g.
Compact Slide Series ø, ø, ø, ø RoHS Allowable moment MXS Improved by up to MXQ MXQ 2% MXF MXW MXJ MXP MXY With new high rigidity linear guide MTS Allowable moment improvement illustrated below Allowable
Verdermag Global Style series
125 series GENERAL 125 Horizontal End-Suction centrifugal pump Centerline discharge Mag-drive Synchronous coupling Back-pull out design Maximum possible temperature: 205 C Minimum possible temperature
efficiency) as well as for good quality reception.
Telephone Receiver Operation part 1 The speech signals that arrive at a telephone receiver are extremely small (usually less than 0.1uW). Therefore a telephone receiver must be very efficient in design
WORLDWIDE GEAR REDUCERS Inline Helical Speed Reducers Product Overview / Maximum Ratings
WORLDWIDE GEAR REDUCERS Inline Helical Speed Reducers Product Overview / Maximum Ratings Product Overview 2:1-120:1 ratios (other ratios available as custom orders) sizes - Horsepower range from 1/4 to
TABLE OF CONTENTS. 1. Preface P: 2 P: Vectors. 3. Summary Table P: 4-5
TABLE OF CONTENTS. Preface 2. Vectors 3. Summary Table 4. METAL a. HSS-G Drill Bits b. HSS-Co Drill Bits c. Bimetal Hole Saws d. TCT Hole Saws P: 2 P: 3 P: 4-5 P: 8 P: 9 P: 0- P: 2 5. CONCRETE a. Multi-Purpose
Drive. Guide. Profile rail guide with ball circuit and wiper smooth torsion stiff. Intake flange. Adapter plate
Linear Rail Slides Highlights Drive Double acting pneumatic cylinder maximum drive force in extend and retract movement pressure force up to 1 N Guide Profile rail guide with ball circuit and wiper smooth
Inline pumps Series INP
Series informationen INP_02_EN Inline pumps - Overview of products - Executions - Materials - Types of seals - Dimensional drawings General Description The centrifugal pumps series INP are single stage,
International Journal of Advance Engineering and Research Development. Magnetic powered engine
International Journal of Advance Engineering and Research Development Scientific Journal of Impact Factor (SJIF): 4.72 Special Issue SIEICON-2017,April -2017 e-issn : 2348-4470 p-issn : 2348-6406 Magnetic
26000 litre ISOTANK SPECIFICATION FOR HAZARDOUS CHEMICALS TRANSPORT AND STORAGE SPECIFICATION T11.
26000 litre ISOTANK SPECIFICATION FOR HAZARDOUS CHEMICALS TRANSPORT AND STORAGE SPECIFICATION T11. DESCRIPTION: 26 000 LITRE INSULATED UN PORTABLE TANK, TYPE T11 For transport of product classes 3, 4,
Overhead transmission lines Tension clamp
SVENSKA KRAFTNÄT T~ SWEDISH NATIONAL GRID UNIT, BUSINESS AREA AFL, Asset Management Lines OUR REFERENCE TR05-06E DATE 2016-06-09 CONSULTÅTIONS m /j(j TECHNICAL GUIDELINE REVISION 3 Td APPROVED Overhead
DIN 950. Spoked handwheels. d 2. l 3. d 3. l 1. Operating elements. Cast iron / Aluminium. SPECIFICATION Types
DIN 0 RoHS Cast iron / Aluminium SPECIFICATION Types Type A: without handle Type F: with fixed handle Type D: with revolving handle Bore codes Version B: without keyway Version K: with keyway Version V:
Permanent Magnet Market by Type (Neodymium Iron Boron Magnet, Ferrite Magnet, Samarium Cobalt Magnet), End-Use Industry (Consumer Electronics,
Permanent Magnet Market by Type (Neodymium Iron Boron Magnet, Ferrite Magnet, Samarium Cobalt Magnet), End-Use Industry (Consumer Electronics, General Industrial, Automotive, Medical Technology, Environment
Conveyor chain catalogue
Conveyor chain catalogue www.renold.com Table of Contents Section - Conveyor Products and Dimensions Conveyor chain introduction....................................................................5-7 BS
Aspects of Permanent Magnet Machine Design
Aspects of Permanent Magnet Machine Design Christine Ross February 7, 2011 Grainger Center for Electric Machinery and Electromechanics Outline Permanent Magnet (PM) Machine Fundamentals Motivation and
THE NEW DIGITAL REVOLUTION IN THE AUTOMATION SECTOR
THE NEW DIGITAL REVOLUTION IN THE AUTOMATION SECTOR CATALOGUE NOVEMBER 2017 THE BRUSHLESS MOTOR The Roger Technology Brushless motor is a digital three phase motor. The word Brushless means a motor without
CONSOLIDATED BILL OF MATERIALS (BOM) FOR STANDARD H-SERIES GEAR PUMPS
CONSOLIDATED BILL OF MATERIALS (BOM) FOR STANDARD H-SERIES GEAR PUMPS Model H14F Sealed, Long-Coupled Model H14F Sealed or Mag-Drive, Close-Coupled Table of Contents Model H14F: SEALED-Long-Coupled: 316
Magnet Optimized for Angular Position Sensor Application
Case Study Magnet Optimized for Angular Position Sensor Application The angle position sensor, also referred to as a rotary sensor, measures position relative to another about a common axis of rotation.
Access Door General Characteristics. RD Access Doors. GX Access Doors. LX Access Doors. RRD Access Doors for Round Ducts
Access Doors 58 61 64 67 70 74 77 78 79 80 81 82 83 84 85 Access Door General Characteristics RD Access Doors GX Access Doors LX Access Doors RRD Access Doors for Round Ducts IRD Insulated Access Doors