27 Magnetic armatures

Transcription

1 27 Magnetic armatures Magnetic door locks Magnetic door locks Magnetic door locks Sandwich magnets Special-purpose magnetic door locks ounter-sunk magnetic door locks Magnetic catches screwable / lockable Retaining devices Magnetic door catch Magnet with hinge dition:

2 Magnetic armatures Sandwich magnets Sandwich magnets made of hard ferrites can be used as pull-type for various purposes. They consist of a magnet and two zinc coated fixed pole-s, sealed in black plastic. imensions Stock no. Pull ounter G Ø S3 30 Q4 / PR S6 60 Q6 G S Q10 For counter s please see chapter 28 S dition:

3 ylindrical sandwich magnets ecause of their superior field of attraction at a distance and their resistance to vibrations, these magnets can be used for fixing as well as for conveyance. They can be employed at temperatures of up to 100. The types F12 an F16 are encased in a brass shell; an integrated plastic screw serves to mount and adjust the magnet. The front surface is ground. The type F22.00 is encased in an aluminium shell. ll these types are protected against corrosion. Maximum tightness of screws: 5 m F...0 F F F...00 imensions Stock no. Pull ounter F M F Serie W M F Serie W M F Serie W M F Serie W M F Serie W For counter s please see chapter 28 dition:

4 Magnetic door locks These magnetic locks fulfil all the demands of high quality installations. They offer a good field of attraction at a distance. The poles are placed in such a way that they also allow for undiminished attraction if the counter s are slightly offset. F The 6-Series The plastic case is made of unbreakable, anti-static and non-ageing plastic material. The types JUIOR and SIOR are fitted with caps to mask the screws, which provides a particularly attractive finish. JUIOR 16/ SIOR 26 The 7-Series The case is rounded on both sides and made of shock-proof plastic material. Mounting: to be counter-sunk. The magnets can be rigidly fixed by means of two Ø 3 mm screws. F imensions Stock no. Pull olour ounter SIOR 27 F JUIOR W incl SIOR W incl SIOR W incl. W = white dition:

5 Serie / MS Series Mounting: With two 3 mm round screws, screwed fast either through the round or the oval fastening holes.oval fastening holes allow for enhanced adjusting. MS imensions Stock no. Pull olour ounter MS4 40 W W4, W12 W = white For counter s please see chapter 28 PLTX xtra flat door lock with simple mounting: one single screw, inclusive of self-adhesive counter. The magnet is made of high-performance plastic material.the pole s, which are flexible, rest on a shock-absorbing support, so that shocks are absorbed and possible play can be compensated Mounting: One single flat screw Ø 2.5 mm. The protruding edge prevents torsion. 18 Stock no. Pull olour ounter PLTX 50 white incl. dition:

6 Sandwich magnet Materials: Smo, steel St37 Temperature: max. 150 xecution: zinc coated Stock no. Weight Lift g M Magnetic door locks This type consists of a case with totally counter-sunk screws, it includes a flexible counter, and is mounted on plasic supports. imensions Stock no. Pull olour ounter RLY3 30 W incl RLY4 40 W incl. RLY RLY5 50 W incl RLY6 60 W incl. This counter is riveted onto a plastic base. Slight flexibility ensures compensation of play. Mounting: with two round screws. Oval mounting holes permit some adjustment space. SUP extra large For large doors (wall cupboards), without counter s imensions Stock no. Pull olour ounter SUP W Q 10 W = white For counter s please see chapter 28 SUP dition:

7 Special-purpose magnetic door locks The magnets to be mounted on surfaces have flexible pole s which automatically compensate any divergence of parallelism. imensions Stock no. Pull olour ounter SUP SUP4 40 W Q SUP6 60 W Q X4 40 W Q2 W = white For counter s please see chapter 28 X4 dition:

8 ounter-sunk magnetic door locks The magnets for locks are optically neutral and particularly suitable as an application to wooden furniture. In addition to the dynamic magnetic behavior, such magnets may also be combined with each other, in order to produce additional variants of adhesive strength. F G Material: dfe-magnet, neutral tint polypropylene imensions, mm Stock no. Pull Magnetic rilling pole hole F G mm M Ø M66613S 6 S Ø M66615S 12 S Ø10 Packaging units 100 pieces ounter type W4 (to be ordered separately, please see pages and 27-14) ifferentiating characteristics: Pull 6 with central hole 3mm (dimension F) 12 with central hole 5mm (dimension F) Magnetic pole South pole with additional hole Ø1mm (dimension G) orth pole without additional hole Variants of application: Single 6 S 6 2 Magnets of equal adhesive strength against each other (-pole on S-pole) 6 S 12 2 Magnets of unequal adhesive strength against each other (-pole on S-pole) 6 S S 6 Special application as a damper 2 Magnets with equal poling against each other (-pole on -pole or S-pole on S-pole) dition:

9 ounter-sunk magnetic door locks These magnets are totally counter-sunk in the wood, which guarantees a particularly sophisticated finish. For attached doors. The cylindrical magnet has a ground front surface and is set in a plastic case. Several ribs and a covering neck ensure firm seat and precise positioning. The front face of the «IS1.5» type is not ground: this means reduced adhesive force, but enhanced resistance to corrosion. H imensions Stock no. Pull olour ounter H IS1 10 S W IS W W IS2 20 W W IS4 40 W W IS6 60 W V4, W16 W = white S = black For counter s please see chapter 28 Magnetic catches scre wable / lockable Temperature: max. 60 Stock no. Weight Lift g M M M M dition:

10 Retaining devices Retaining devices are used to fix doors, gates, grids, partitions, etc. securely and reliably. ecause they have a sufficient field of force to resist air draughts, vibrations and acceleration jerks, they are not only found in public places, but also on trains and ships. They also serve to keep machine cases in place. The slightly flexible case compensates for possible imprecision of adjustment. The pole s are protected against corrosion. ach retaining device is delivered together with its corresponding counter of the W-Series. The 1-Series With wall mounting. The compact magnet is set in a flexible plastic case. Mounting: The magnet case is latched to a plastic holder, which is screwed to the wall, and kept in position by means of a hasp... -1W imensions Stock no. Pull olour ounter W 200 H incl W 300 H incl. H = light grey dition:

11 The 2-Series Mounting on a surface which is positioned parallel to the movement, e.g. on the floor. The compact magnet is set in a plastic case. Mounting: The magnet case is slid onto a mounting made of plastic, which is screwed onto the floor (or the wall). The assembly is kept in position by means of a hasp. H J imensions Stock no. Pull olour ounter H J W 200 H incl. H = light grey Magnetic door catch Temperature: max. 60 xecution: avec surfaces de contact rondes et angle d adhérence de plus 280 Stock no. Weight Lift g M dition:

12 Magnetic door catch with rubber buffer Materials: dfe, plastic coated soft Temperature: max. 60 xecution: black Stock no. Weight Lift g M Magnet with hinge Materials: dfe, plastic coated Temperature : max. 50 xecution: ball stud M6x15 Stock no. Weight Lift g M dition: