Modular Lube Lubrication Systems
|
|
|
- Rhoda Summers
- 6 years ago
- Views:
Transcription
1 Modular Pump Accessories Low-Level Switches Low-level switches for modular design reservoirs. Use with Reservoir # Switch Type Electrical Rating , 87418, SPDT SPDT 7 Amps 125 / 250 VAC SPDT , 87403, 87406, SPDT 15 Amps 125 / 250 VAC SPDT 15 Amps; 125, 250, 480 VAC.5 Amp 125 VDC.25 Amp 250 VDC Low-Level Switch Assembly Kits for pneumatic and electric reciprocating pumps with self-contained reservoirs. Use with Pump Switch Type Electrical Rating , Amps; 125, 250, 480 VAC SPDT.5 Amp 125 VDC.25 Amp 250 VDC High- Switch High-pressure switch signals blockage and returns pump output to reservoir. Rating - psig / bar Switch Type Electrical Rating / 99 SPDT 15 Amps, 125/250 VAC 14
2 Modular LP Pumps : Type: Hydraulic Ratio: 5:1 Hydraulic Min.: 200 psi / 14 bar Hydraulic Max.: 1000 psi / 68 bar Lubricant Output/Cycle Min.:.010 cu. in. /.164 cc Lubricant Output/Cycle Max.:.060 cu. in. /.983 cc Cylinder Type: Double acting Directional Valve Requirement: 4-Way : Type: Air Ratio: 18:1 Air Min.: 60 psi / 4 bar Air Max.: 200 psi / 14 bar Lubricant Output/Cycle Min.:.010 cu. in. /.164 cc Lubricant Output/Cycle Max.:.060 cu. in. /.983 cc Cylinder Type: Single acting Directional Valve Requirement: 3-Way Note: Pumps include Buna-N O-rings. Modular LP-Style Reservoirs Mount directly to LP pumps. Includes 3000 psig (200 bar) gauge and 900 psig (62 bar) atmospheric indicator. Transparent, polycarbonate construction. Lubricant Capacity Dimensions - in. / mm Air Lube lb/ Type kg. liter cu. cc Hydraulic Outlet Height Width Depth pint in lb ¹ ₈" ¹ ₈" 11.6 / 295 Grease lb NPSM NPSM 14.6 / Oil 5 pint (F) (F) 10.3 /
3 Reciprocating Pumps Air-Operated Reciprocating Pump : Lubricant Type: Grease Lubricant/Air Ratio: 40:1 100 psig Air (cu. in.): psig Air (cc): 197 Reservoir Capacity* (lbs.): 12 Reservoir Capacity* (kg): 5.45 Reservoir Capacity* (cu. in.): 360 Reservoir Capacity* (cc): 5900 Air Inlet: ⅛" NPTF(F) Lube Outlet: ¼" NPTF(F) Dimensions (HxWxD) in: 20.5" x 9" x 16.25" Dimensions (HxWxD) mm: x 229 x 413 mm * Transparent Acrylic Reservoir Air-Operated Reciprocating Pump : Lubricant Type: Oil Lubricant/Air Ratio: 40:1 100 psig Air (cu. in.): psig Air (cc): 197 Reservoir Capacity* (pints): 15 Reservoir Capacity* (liter): 7.1 Reservoir Capacity* ( cu. in.): 433 Reservoir Capacity* (cc): 7100 Air Inlet: ⅛" NPTF(F) Lube Outlet: ¼" NPTF(F) Dimensions (HxWxD) in: 20.5" x 9" x 16.25" Dimensions (HxWxD) mm: x 229 x 413mm * Transparent Acrylic Reservoir Note: Both models require a 3-way air valve. Atmospheric Indicator : psi/183 bar psi/100 bar Electric-Operated Reciprocating Pump : Lubricant Type: Grease Electrical Requirements: 220/440, 60 Hz 3 ph Output/Minute (cu. in.): 18 Output/Minute (cc): 295 Reservoir Capacity* (lbs.): 12 Reservoir Capacity* (kg): 5.45 Reservoir Capacity* (cu. in.): 360 Reservoir Capacity* (cc): 5900 Lube Outlet: ¼" NPTF(F) Dimensions (HxWxD) in: 25.38" x 9.94" x 18.06" Dimensions (HxWxD) mm: 645 x 253 x 459 mm Relief Valve (psig): 3700 psig Relief Valve (bar): 255 bar * Transparent Acrylic Reservoir 16
4 MCLP Pumps MCLP Pumps For natural gas engine/compressor lubrication systems BCC MCLP Pump complete with pump heads. : Gear Ratio: 2:1 Decimal Gear Ratio:.5 Pump Heads: ( ) BCC Left-hand end, long shaft 10 mm (2 each) 7300 psig / 500 bar GEE : GEE Left-hand end Gear Ratio: 8:1 Decimal Gear Ratio: KEE : KEE Left-hand end Gear Ratio: 21.5:1 Decimal Gear Ratio:
5 MCLP Pumps DEE DEE Left-hand end Gear Ratio: 4:1 Decimal Gear Ratio: GEE : GEE Right-hand end Gear Ratio: 8:1 Decimal Gear Ratio: KEE : KEE Right-hand end Gear Ratio: 21.5:1 Decimal Gear Ratio:.047 Notes: 1. Recommended camshaft speed (RPM) for all pumps is: 12 to 75 rpm. 2. MCLP output (per pump) = Input speed x decimal ratio x pump output factor* = pints per day * See MCLP pump head chart for pump output factor 18
6 Pump Accessories MCLP Pump Heads Piston Diameter Max. Working psig/bar Pump Output Factor Min 1 Turn Flow Restrictor Flow restrictor for LP Pumps with high air or hydraulic supply pressure. MCLP Pump Inlet Filters Max 5 Turns Max. Inlet psig/bar In-Line Lubricant Filters Remove solid contaminants before delivering lubricants to the supply line. Filler Pump Manual pump for system purging and troubleshooting. Pump Inlet Pump Outlet Performance Indicator psi/bar mm 8000/ ³ ₈" ¹ ₄" 5500/ mm 3500/ NPTF(F) NPTF(F) 3250/221 For Exceeding - psig / bar Pneumatic Hydraulic Connections / / 34 ¹ ₈" NPTF(F) x ¹ ₈" NPTF(M) Pump Heads Served Filter Size Inlet Max. Inlet psig / bar Micron 1" NPTF(F) 50 / 3.5 Part No. Element Size micron Maximum Connections in. Hex Body Size - in. * psig / 414 bar ¹ ₄ NPTF (F) 1¹ ₄ * In-line filter with flouroelastomer seal. Max. Press. Gauge Reading psig / bar Reservoir Capacity / oz. Outlet Adapters ⁵ ₁₆" - 24 UNF(M), ⁷ ₁₆" - 20 UNF(M), ¹ ₈" NPTF(M), ¹ ₄" NPTF(M) No-Flow Valves MCL pump no-flow valves shut down engine or signal fault if oil flow is interrupted. Signal Type Pneum. Max. Operating psig / bar Oil Viscosity Range Inlet/Outlet Air Oil Air Supply 150 psi max 60 SSU- ¹ ₈" ¹ ₄" 6000 / SSU NPTF(F) NPTF(F) Electric Electrical Rating 3rd Party Approvals 1 amp, 115 VAC.5 amp, 32 VDC Notes: 1. Minimum flow rate.060 cu. in./minute with time delay setting of 90 seconds. 2. Includes flouroelastomer oil seals. CSA Class I, Group D Class II, Group E, F & G 19
Modular Lube. Automated Lubrication Systems
Modular Lube Automated Lubrication Systems We install Lincoln Industrial Modular Lube systems to protect our equipment and ensure the performance our customers demand. Ryan Riske, Weatherford Compression
People, Capabilities and Systems to Save Money and Increase Productivity
People, Capabilities and Systems to Save Money and Increase Productivity We re the largest and most successful company in our field because we continually satisfy our customers with the world s best lubrication
People, Capabilities and Systems to Save Money and Increase Productivity
People, Capabilities and Systems to Save Money and Increase Productivity We re the largest and most successful company in our field because we continually satisfy our customers with the world s best lubrication
Section 9: Centralized Lubrication Systems
ALEMITE LUBRICATION EQUIPMENT AND FLUID HANDLING PRODUCTS Oil Mist Systems Introduction Alemite Oil Mist Systems are used to service all types of machine elements that require continuous lubrication, such
Installation Components AirCare Air Preparation Systems
Modular Line Filters 602104 602106 602108 602109 250 psig / 17 bar Body Material icle Zinc Zinc* * Sintered Polypropylene 40µ 602104 Drain Type Port PTF ¹ ₄ 602106 Manual ³ ₈ A B C Dia. 5.27 / 1.34 0.75
Centro-Matic. Automated Lubrication Systems
Centro-Matic Automated Lubrication Systems I install Lincoln Centro-Matic systems with confidence because I know they re going to prolong the life of my customer s critical machinery. Les Maness, Installation
Installation Components AirCare Air Preparation Systems
Care Preparation Systems Modular Line Filters 602104 602106 602108 * Transparent 602109 nylon liquid level indicator -18 lens. to 79 C Body Bowl Material icle Zinc Aluminum Zinc* Aluminum* Sintered Polypropylene
Centralized & Automated Lubrication Systems. I design Quicklub and other systems to satisfy each customer s unique requirements.
Quicklub Centralized & Automated Lubrication Systems I design Quicklub and other systems to satisfy each customer s unique requirements. Patrick Sändker, Application Engineer, Lincoln Industrial Systems
MultiPort Lubricator. Electric motor-driven, Grease and Oil. General. Technical Data. Motor R3 09/09
MultiPort Lubricator Electric motor-driven, Grease and Oil General The MultiPort Lubricator is a rugged, motor-driven, electric lubricator, equipped with fixed output pumping elements to discharge grease
Lincoln Centro-Matic automatic lubrication systems
Lincoln Centro-Matic automatic lubrication systems People, capabilities and systems to save money and increase productivity We re the largest and most successful company in our field because we continually
Industrial Pumping Equipment PileDriver III Series III Air Motor Features
PileDriver III Series III Air Motor Features These fully pneumatic air motors reverse stroke direction without mechanical linkages and are simpler and more reliable than older designs. Air motors are 3,
Centro-Matic Automated Lubrication Systems Grease Injectors
SL-33 For dispensing petroleum-based lubricants with a viscosity up to NLGI No. 2 (refer to Design Guide). May be combined in a circuit of Injectors SL-32, SL-V, SL-V XL, SL-1 and/or SL-11. Available in
Industrial Pumping Equipment Air-Operated Diaphragm Pumps
Industrial ing Equipment -Operated Diaphragm s 85630 85628 85622 85634 ¼" - 2" -Operated s Basic Design Features Diaphragm pumps are driven by compressed air.the directional air distribution valve and
Features and Benefits
AutoLube-BTX Since 1919, Alemite has been supplying innovative products to meet the growing needs of a competitive lubrication industry. Through dedication to quality, dependability and customer satisfaction,
MultiPort Lubricator. Electric motor-driven, Grease and Oil. General. Technical Data. Motor R8 08/18
MultiPort Lubricator Electric motor-driven, Grease and Oil General The MultiPort Lubricator is a rugged, motor-driven, electric lubricator, equipped with fixed or adjustable output pumping elements to
QUICKLUB CENTRALIZED & AUTOMATED LUBRICATION SYSTEMS
QUICKLUB CENTRALIZED & AUTOMATED LUBRICATION SYSTEMS Quicklub Simple, cost-effective lubrication solutions for all of your machinery. People, Capabilities and Systems to Save Money and Increase Productivity
3000 psi (207 bar) Output/ min. 115 VAC 10cc (0.61 cu. in.) 24 VDC 12cc (0.73 cu. in.) Discharge Element Output Port.
MultiPort Lubricator Grease, Injector General The MultiPort Lubricator is an electrically driven multiple outlet lubrication unit design primarily for use with injector systems. The unit includes two pumping
MultiPort Lubricator. Electric motor-driven, Grease and Oil. General. Technical Data. Motor R6 08/17
MultiPort Lubricator Electric motor-driven, Grease and Oil General The MultiPort Lubricator is a rugged, motor-driven, electric lubricator, equipped with fixed or adjustable output pumping elements to
FARVAL DUALINE SYSTEMS + + Ideally suited for heavy industry + + Continuous duty operation + + Over 80 years of excellence
FARVAL DUALINE SYSTEMS + + Ideally suited for heavy industry + + Continuous duty operation + + Over 80 years of excellence Contents Introduction... 3 Dualine Systems... 4 Multiple Valve Manifold and Grease
farval DUaLINE SYSTEMS Ideally suited for heavy industry Continuous duty operation Over 80 years of excellence
farval DUaLINE SYSTEMS + + + Ideally suited for heavy industry Continuous duty operation Over 80 years of excellence Contents Introduction... 3 Dualine Systems... 4 Multiple Valve Manifold and Grease Gun...4
Your key to maximum design flexibility with seriesprogressive
Bulletin 10102 R MSP Modular Divider Valves Your key to maximum design flexibility with seriesprogressive reliability. IDEX CORPORATION LUBRIQUIP, INC., A Unit of IDEX Corporation 1995. All Rights Reserved.
Lincoln Quicklub centralized and automatic lubrication systems
Lincoln Quicklub centralized and automatic lubrication systems People, capabilities and systems to save money and increase productivity We re the largest and most successful company in our field because
Centro-Matic Automatic Lubrication Systems Grease Injectors
Centro-Matic utomatic Lubrication Systems SL-33 For dispensing petroleum-based lubricants with a viscosity up to NLGI No. 2 (refer to Design Guide). May be combined in a circuit of Injectors SL-32, SL-V,
Quicklub Lubrication Systems
Electric Grease Pumps 203 Series * Can be set for either minutes or seconds. P203 Series Pump These pumps are electrically operated and are used in progressive-type automated lubrication systems. The proven
Industrial Pumping Equipment PowerMaster III
PowerMaster III Features State-of-the-art, fully pneumatic air motors, 3, 4, 6, 8 inches (76, 101, 152, 203 mm) diameter. Full six-inch stroke for greater output per cycle. Modular design for easy repair.
400 psi (28 bar) PDI & INJ. 100 psi (7 bar) PDI & INJ
Airmatic Lubricator Pneumatic Operation, Oil General The Airmatic lubricator is a simple economical unit with a broad range of output. It is designed to be operated with shop air. The stroke setting is
HOSE REELS 151. Heavy-Duty Series
CODE 331 HOSE REELS 151 Heavy-Duty Series Quarter-inch thick steel welded base and roller outlet arm Pressure tested to insure a quality leak-free installation every time Backed by a five-year limited
SOLUTIONS. Airless Spray System. In This Issue: Airless Spray System pg. 2. Improved FlowMaster pg. 5
THE LATEST PRODUCTS AND NEWS FOR LINCOLN CUSTOMERS SOLUTIONS DECEMBER 2002 VOL. 4, NO. 1 Airless Spray System In This Issue: Airless Spray System pg. 2 Improved FlowMaster pg. 5 MC 2 Progressive High Pressure
THE REVOLUTIONARY P653S ELECTRIC CENTRO-MATIC PUMP
Lincoln The Industry Leader Since 1910 The Heart of a Centro-Matic Automated Lubrication System The P653S is the central pump station that automatically delivers lubricant through a single supply line
MOTOR. The electric motor. DC - direct current voltage.
TMD-5 Lubricator Automatic Cyclic Before installing or operating this lubricator, please read this manual carefully. Failure to follow instructions can result in damage to the product and/or serious bodily
Modu-Flo. Trabon. Modu-Flo. Pumps Reservoirs Lube Packages Accessories
Modu-Flo Trabon Modu-Flo Pumps Reservoirs Lube Packages Accessories Modu-Flo concept provides a proven, cost-effective way to assemble customized oil or grease lubrication systems that meet specifi c requirements
MHH Modular Divider Valves
Manzel MHH Modular Divider Valves Available Electronic Only Modular, Series-Progressive, Divider Valve Delivers Positive Oil Lubrication for Gas Engines, Compressors and Similar Equipment at Pressures
FARVAL DUALINE SYSTEMS. + Ideally suited for heavy industry + Continuous duty operation + More than half a century of excellence
FARVAL DUALINE SYSTEMS Ideally suited for heavy industry Continuous duty operation More than half a century of excellence Contents Introduction... 3 Dualine Systems... 4 Multiple Valve Manifold and Grease
VOG Series VOG15.01xU1 Oil Safety Shut-off Valves with Proof of Closure (POC)
VOG Series VOG15.01xU1 Oil Safety Shut-off Valves with Proof of Closure (POC) Document No. 129-464 VOG15 March 30, 2010 Description Oil Safety Shutoff Valve The VOG15 is an electro-hydraulically actuated
QLS 321 SOLUTIONS. Compact and Rugged Easy to Install and Use Multiple Standard Features. Quicklub Lubrication Systems.
THE LATEST PRODUCTS AND NEWS FOR LINCOLN CUSTOMERS SOLUTIONS APRIL 2001 VOL. 3, NO. 2 A New Addition To Our Line of Powerful Quicklub Lubrication Systems In This Issue: QLS 321 Compact and Rugged Easy
AIR PREPARATION PRODUCTS. Table of Contents
AIR PREPARATION PRODUCTS Table of Contents Page Air Filters................................................. 5-7 Oil Removal Filters......................................... 8-9 Regulators..............................................
Centro-Matic Automatic Lubrication Systems FlowMaster Hydraulic Pump
FlowMaster Hydraulic Pump High-performance FlowMaster hydraulic pumps combine rotary-driven pump motors with reciprocating pump tubes and flexible control features that perform in desert heat and arctic
Fracturing Equipment Lubrication Kits
Fracturing Equipment Lubrication Kits Get the Graco Advantage Because not all oil and gas applications require just one solution, Graco offers multiple levels of advanced control and monitoring and accessories
Fluid Handling: Panel Unit
Fluid Handling: Panel Unit A permanently mounted, continuous-duty system for critical applications or difficult to access equipment. It also can serve as a maintenance station. The Overview The Panel Unit:
Use Type C control units. Viscosity range is 100 to 10,000 SSU at operating temperature. See Bijur Engineering Manual for system limitations.
V5W Lubricator Automatic Continuous Operation The V5W Lubricator consists of a motor-driven gear pump, with a controlled bypass valve. (constant volume or constant pressure models) The fully automatic
Portable Equipment High-Pressure Heavy-Duty Grease Pumps
High-Pressure Heavy-Duty Grease Pumps 917 346P 987 Series 20 50:1 Air-Operated Double Acting The following models contain Lincoln s high pressure Series 20 grease pumps. Model 917 120 lb. Drum Will dispense
M OTO R. The electric motor. DC - direct current voltage.
TMD-5 Lubricator Automatic Cyclic Before installing or operating this lubricator, please read this manual carefully. Failure to follow instructions can result in damage to the product and/or serious bodily
Pumps 20, 25 & 40 Pumps High-Pressure
20, 25 & 40 Pumps High-Pressure The Heavy-Duty 50:1 Grease Pump Family from Lincoln Lincoln air-operated lube equipment models featuring our high-pressure Series 20 and Series 40 grease pumps have been
AIR OPERATED OIL PUMPS AND KITS
PM 2 AIR OPERATED OIL PUMPS AND KITS PM 2 Oil pump, pressure ratio : 0 Double acting air operated pumps for transferring lubricants and other non-corrosive fluids. Pump includes bung adapter. New Model
Pumping Ratio 50:1. ( bar) Max. Output 7500 psi. Air Inlet. Material Outlet. Airmotor Bore Dia. 3 in. (76.2 mm) Stroke
3" and 4.25" Grease Pumps Specifications 5:1 3" Grease Pump Specifications / Performance Testing Pumping Ratio 5:1 Air Pressure 4-15 psi (2.7-1.3 bar) Max. Output 75 psi Pressure (517 bar) Air Inlet 3
Series 3000 Divider Valve Manifold
Series 3000 Divider Valve Manifold Progressive Systems General The Series 3000 progressive divider valve manifold distributes and proportions incoming oil or grease to bearing points. A typical divider
Lincoln Quicklub centralized and automatic lubrication systems
Lincoln Quicklub centralized and automatic lubrication systems People, capabilities and systems to save money and increase productivity We re the largest and most successful company in our ield because
SureFire II Lubricator
SureFire II Lubricator Automatic, Oil & Fluid Grease, Single Phase General The SureFire II Lubricator is an automatic, robust and durable pump. Its compact size is designed to fit your space requirements
Grease and Oil Injectors
Grease and Oil Injectors LIT099 AL-32 Grease Injector OVERVIEW The AL-32 Grease Injectors are designed for single line, high-pressure centralized lubrication systems. These injectors are available in
LubePro Series Pumps For Simple, Injector-based Automatic Lubrication Systems
LubePro Series Pumps For Simple, Injector-based Automatic Lubrication Systems The Choice of Lubrication Professionals. As a hard-working professional focused on ensuring your production lines keep moving
SureFire II Lubricator
SureFire II Lubricator Automatic, Oil & Fluid Grease, Three Phase General The SureFire II Lubricator is an automatic, robust and durable pump. Its compact size is designed to fit your space requirements
50 SERIES FILTER F50B Series F50B-04 pictured Application ANSI SYMBOL Primary air filters are designed to separate liquid, water, rust, pipe scale, an
FRL Products and Accessories High Flow FRL Series 50 Series Filters 44 50 Series Regulators 45 50 Series Pilot Operated Regulators 46 50 Series Lubricators 48 50 Series Filter/Regulator/Lubricator Combinations
12AT/50AT Series. Spin-On Filters. Global Filtration Technology
1AT/5AT Series Spin-On Filters Global Filtration Technology 1 1AT/5AT Series Applications for Spin-On Filters n Mobile Equipment n Hydrostatic Drives n Industrial Power Units n Reservoir Breathers Often,
General Lubrication Products High Pressure Stationary Grease Pumps
High Pressure Stationary Grease Pumps The Heavy Duty 50:1 Grease Pump Family from Lincoln Lincoln air operated lube equipment models featuring our high pressure series 20 and series 40 grease pumps have
Centro-Matic Automated Lubrication Systems Grease Injectors
Series SL-33 For dispensing petroleum-based lubricants with a viscosity up to NLGI No. 2 (refer to Design Guide). May be combined in a circuit of Injectors SL-32, SL-V, SL-V XL, SL-1 and/or SL-11. Available
MH Modular Divider Valves Product Specs and Ordering. and. Bulletin Revised October 2000
Bulletin 10103 R and MH Modular Divider Valves Product Specs and Ordering Modular, Series- Progressive, Divider Valve Delivers Positive Oil Lubrication for Gas Engines, Compressors and Similar Equipment
Airmatic Lubricator. Pneumatic Operation, Oil. General. Application. Operation. Technical Data
Airmatic Lubricator Pneumatic Operation, Oil General The Airmatic lubricator is a simple economical unit with a broad range of output. It is designed to be operated with shop air. The stroke setting is
How to select parts to build an MX series progressive divider valve assembly, with NPT threading.
How to select parts to build an MX series progressive divider valve assembly, with NPT threading. A simple MX assembly consists of these basic parts: 1. Inlet 2. Valve sections 3. End section 4. Tie Rods
12AT/50AT Series Spin-On Filters
1 Applications for Mobile Equipment Hydrostatic Drives Industrial Power Units Reservoir Breathers Often, economic conditions dictate what type of filter is used on a piece of equipment. When costs are
Lubemaster Pump DESCRIPTION
Lubemaster Pump DESCRIPTION The Trabon Lubemaster is a rugged, reliable pump for use with Trabon Series Flo divider valves to lubricate all types of machinery. It can be driven by an electric motor or
Fill cap with inlet strainer (40 mesh) Automatic approved quick connect inlet (no strainer)
GPO ubricator Motor-driven gear pump, Oil General The GPO ubricator is a motor-driven gear pump that is designed for use with single line centralized lubricating systems utilizing progressive distributors
MultiPort II Lubricator
MultiPort II Lubricator Mobile, PDI, Grease General The MultiPort II Lubricator is an electrically driven multiple outlet lubrication unit designed primarily for use with positive displacement injector(pdi)
CLP - Cartridge Lube Pump
General The Cartridge Lube Pump is an electrically driven, single outlet, pump designed for use with the universal grease cartridges widely available in industry today. The lubricator is available with
Models CHASSIS LUBE ELECTRIC GREASE PUMP Series "C" - 13C MAY FORM Page. Section - Q3
Models 94422 CHASSIS LUBE ELECTRIC GREASE PUMP Series "C" MAY - 2004 FORM 403467 Section - Q3 Page - 13C 9.00" (229 mm) 13.75" (350 mm) 0.35" (9mm) Mounting Holes 4.76" (121 mm) 9.84" (250 mm) Do not use
Model CHASSIS LUBE ELECTRIC GREASE PUMP Series "C"
Model 94222 CHASSIS LUBE ELECTRIC GREASE PUMP Series "C" Indicates change MAY - 2004 FORM 403466 Section - Q3 Page - 12B 7.75" (197 mm) 12.6" (321 mm) 0.35" (9 mm) Mounting Holes 4.85" (123 mm) 8.85" (225
Models CHASSIS LUBE ELECTRIC GREASE PUMP Series "C" - Q3. MAY FORM Section
Models 94822 CHASSIS LUBE ELECTRIC GREASE PUMP Series "C" - Q3 MAY - 2004 FORM 403468 Section Page - 14B 13.00" (330 mm) 17.72" (450 mm).35" (9 mm) Mounting Holes 4.72" (120 mm) 9.84" (250 mm) Figure 1
Lubrication Fittings. General Information. Alemite Lubrication Fittings include:
General Information 6 Alemite include: Determining Pipe Thread Sizes...3 1/4"-28 Taper Thread...4 1/4"-28 Straight Thread...5 1/8" PTF... 6 1/4" PTF... 8 1/4"-28 and 1/8" Thread Forming...9 Drive... 11
ADVANCED CUSTOMIZED ELECTRO PNEUMATIC TRAINER (PRODUCT CODE: SAP 20B)
The Advanced Customized Electro Pneumatic Trainer (SAP 20B) is capable of being used to demonstrate the design, construction and application of electro-pneumatic components and circuits. Objectives:- The
Air/Oil Lubrication System
SPRAY NOZZLE SPRAY PATTERN GEAR SET NOZZLE TUBE ASSEMBLY TYPICAL BALL BEARING ARRANGEMENT Air/Oil System for Multiple Spindle Heads and High- Speed Box Spindles NEW LUBRICATION METHOD FOR HIGH SPEED BEARINGS
SKP Series SKP15 U.. Gas Valve Actuator with Safety Shutoff Function
SKP Series SKP15 U.. Gas Valve Actuator with Safety Shutoff Function Document No. 155-751 SKP15 U.. Description Only when assembled to Series VG Gas valves SKP15 electro-hydraulic actuators are used in
Fluid Power Accessories
Fred C. Gilbert Co. 106 Norris Road Bakersfield, Ca. 93308 661-399-9569 fax 661-393-9654 PNEUMATIC EXHAUST MUFFLERS Breather Vents 2,3 Exhaust Mufflers 2-5 Reclassifiers / Mufflers 6,7 BREATHER VENTS Speed
SOLUTIONS. International Solutions. FOR A Global Marketplace. In This Issue:
THE LATEST PRODUCTS AND NEWS FOR LINCOLN INDUSTRIAL CUSTOMERS SOLUTIONS JANUARY 2000 VOL. 2, NO. 1 International Solutions FOR A Global Marketplace In This Issue: Worldwide Coverage for all Lincoln Industrial
Introduction to Inline Lubrication. Master Pneumatic
Introduction to Inline Lubrication Master Pneumatic What is the purpose of Inline Lubrication? Sentry Introduce atomized oil into the compressed air line to lubricate: Air Motors Cylinders Gears Sliding
COMPANY. Flow Rate Alarms Installation, Operating & Maintenance Manual
COMPANY Flow Rate Alarms Installation, Operating & Maintenance Manual 2017 AW-Lake Company. All rights reserved. Doc ID:FLOWALARMMA V1 2017 Technical Specifications Measuring Accuracy ±2.0% of full scale
INSTALLATION DIMENSIONS
ACCESSORIES & OTHERS PRESURE GAGE INSTALLATION DIMENSIONS UNIT mm(inch) LM TYPE CBM TYPE CBM-F TYPE MODEL B B1 D D1 D2 G H T d R G40LM 28.1(0.86) φ48(1.9) φ41.7(1.6) 8(0.31) 58.7(2.31) 1/8" G40CBM 26(1.02)
Component List for Graco Trabon Lubrication Systems Products
Component List for Graco Trabon Lubrication Systems Products Document No.: CL- F- Trabon Release Date: December 16, 2016 2017 Graco Inc. 352481 Rev. D 1/1/2017 Page No.: 1 of 54 DOCUMENT MANAGEMENT INFORMATION
D SERIES HYDRAULIC PUMP
uk distributor for D SERIES HYDRAULIC PUMP quality products for mechanical & fluid power jbj Techniques Limited, www.jbj.co.uk Introduction to Concentric D Series Hydraulic Pumps Concentric offers one
Identification Code: P 203-VDC with/without PCB V10-V13, H
Identification Code: P 0-VDC with/without PCB V0-V, H P0, P0 U with - outlets and 4 8 5 Y N = l transparent plastic = 4 l transparent plastic = 8 l transparent plastic = 5 l transparent plastic = reservoir
FRL/AirCare Air Controls & Accessories
FRL/irare ir ontrols & ccessories Lincoln Regulators, Filters & Lubricators well-planned compressed air system ensures minimum pressure loss in the system, and the removal of contaminants: water, compressor
BASIC IN-LINE LIQUID FLOW RATE MONITORS. Data Sheet No. B-699. Select from aluminum, brass or stainless steel to meet system and liquid requirements.
BASIC Data Sheet No. B-699 IN-LINE LIQUID FLOW RATE MONITORS CHOICE OF THREE MATERIALS OF CONSTRUCTION Select from aluminum, brass or stainless steel to meet system and liquid requirements. UNRESTRICTED
FLUID HANDLING: Drum Filter Cart
FLUID HANDLING: Drum Filter Cart This cart is ideal for pre-cleaning, protecting, and transferring oil from a conveniently attachable, secured drum. A drum adapter kit with a desiccant breather is included
FLUID HANDLING: Drum Filter Cart
FLUID HANDLING: Drum Filter Cart This cart is ideal for pre-cleaning, protecting, and transferring oil from a conveniently attachable, secured drum. A drum adapter kit with a desiccant breather is included
MPD Series. Medium Pressure Duplex
Medium Pressure Duplex 89 Applications of MPD Circulating Lube Oil Systems Power Generation Control Systems Steel Mill Control Systems Pulp & Paper Control Systems Test Stands Automotive Stamping Presses
6200 Series. Specifications. Fluid End Power End Models 6211, 6212, 6221, & 6222 Models 6241 & 6242 Part Material Part Material Part Material
5.2018.12.i 6200 Series Specifications The Flomore 6200 Series Pump line consists of a series of basic pump options all developed from a modular power unit. All units are pneumatically driven positive
Filter/Cooler Module. Advantages: RA 50127/ /12 Replaces: Model MFC3, MFN3, MNC3
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Filter/Cooler Module RA 50127/12.11 1/12 Replaces: 03.07 Model MFC3, MFN3, MNC3 4 19 Horsepower Removal
VACUUM A RESOURCE FOR EVERYONE
Vacuum grippers VACUUM PRODUCTS INNOVATORS IN VACUUM TECHNOLOGY CATALOG VERSION 5.0 VACUUM A RESOURCE FOR EVERYONE www.piab.com Accessories Suction cups Vacuum pumps PVA VACUUM SWITCHES, INDUCTIVE UNIVERSAL
Series 1000 Divider Valve Manifold
Series 1000 Divider Valve Manifold Progressive Systems General The Series 1000 progressive divider valve manifold distributes and proportions incoming oil or grease to bearing points. A typical divider
PROFESSIONAL 18-VDC & 120-VAC POWERLUBER
Lincoln The Industry Leader Since 1910 Quality Lincoln Accessories 1201 Batteries 1401 1801 Continually satisfying our customers with the world s best lubrication equipment and pumping systems has made
MVB Pump Packages. MVB Pump Package
MVB Pump Package MVB PUMP USED WITH BLOCK FEEDER SYSTEMS The MVB lubrication system is a single line, series progressive system which divides pump output into predetermined proportional amounts and distributes
LUBRICATION & FLUID HANDLING ACCESSORIES. Heavy duty knurled steel barrel with large threads for easy loading.
hand grease guns Lever type The tough high pressure cast iron head makes Pro-Master Grease Guns unique in comparison to common pot metal or other die cast heads with a head burst pressure of 17,000 PSI
EZ-View. Flow Meters ISO CERTIFIED 9001
EZ-View ISO CERTIFIED 9001 General Design Features OPERATING PRINCIPLE The EZ-View Flow Meter is a variable-area instrument. A precisionmolded, sharp-edged Orifice, located within the Piston Assembly,
MultiPort II Lubricator
MultiPort II Lubricator Mobile, Progressive, Grease General The MultiPort II Lubricator is an electrically driven multiple outlet lubrication unit designed primarily for use with progressive divider valve
SECTION FIVE INDUSTRIAL LUBRICATIONFITTINGS
INDUSTRIAL LUBRICATIONFITTINGS Threaded/Drive Carbon Steel/Monel/Stainless Steel Standard/Metric Specialty Vents/Breathers Couplers Accessories 82 Alemite Product Catalog As the inventor of the Zerk fitting,
Your machinery deserves genuine Bijur parts.
Your machinery deserves genuine Bijur parts. For over 80 years, Bijur has manufactured and supplied the best parts and components for lubrication applications. With over 10,000 parts, you know we have
Motor-driven pump unit GSJB
1-4002-1-EN Motor-driven pump unit GSJB Multi-outlet pump units with oil or grease reservoir designed for centralized lubrication systems The motor-driven pump units GSJB have been especially designed
Pistol Grease Guns. AC475 comes complete with 4" steel extension and 4-jaw coupler with ball check AC476 comes complete with 18" flexible
Lubricating Mini Pistol Grease Guns Deluxe Single-hand-operated pistol grip Die cast grease gun head with dual discharge ports for use with steel extension as well as flexible hose Develops 3500 PSI Capacity:
Portable Filter Carts Models 5MF and 10MF
s Models 5MF and 10MF 161 Applications for Parker Filter Carts Filtering new fluid before putting into service Transferring fluid from drums or storage tanks to system reservoirs Conditioning fluid that
Grease Jockey On-Road Lubrication Solutions. Time-tested lubrication equipment with you for the long haul.
Grease Jockey On-Road Lubrication Solutions Time-tested lubrication equipment with you for the long haul. About Graco Since 1926, Graco remains proud to offer best-in-class industrial fluid handling equipment.
Fluid Dispensing Systems
Fluid Dispensing Systems Automotive Commercial Industrial Diesel Exhaust Fluid (DEF) Open Systems Drum and Tote Packages Lever Pump System EPDM seals for maximum chemical compatibility. Includes 1300-028
Pressure Control Valves Series R. General Description. Specifications. Flow Data
Catalog Y14-2502/US Technical Information Series R General Description Series R direct relief valves limit system pressure by opening to tank when system pressure reaches the valve setting. Specifications