miyotamovement.com QUICK & EASY ACCESS TO NECESSARY INFORMATION
|
|
- Marion Spencer
- 6 years ago
- Views:
Transcription
1
2 and Start and Stop the chronograph Reset the chronograph DO NOT set Day and between 9:00pm 1:00am Center Chronograph Chronograph our Pusher Small Second Chronograph Minute Push A to reset the hands position to the ZERO position, And continue to push A to put them forward miyotamovement.com QUICK & EASY ACCESS TO NECESSARY INFORMATION SEARC BY A KEYWORD SEARC BY FUNCTION EASY TO CECK FUNCTION 0S10 0S11 SIMPLE SPECIFICATION Size <ligne> 1 ½ eight 4.1 <mm> Accuracy ±0 sec <per Month> Battery Life 5 years *60 minutes chronograph operation per day Battery consumption could be minimum by pulling out the stem Balance Weight <μn.m> Minute 0.40 Chrono Second 0.11 Small Attached Stem Φ0.8 SR97W S10 0S11 Featured by Shock Detection Clearance Clearance changes subject to the glass, case structure, and the length of the hand. Original Package case mm. Movement mm 500pcs 1 7 igh and Ver. 0S1A 0S1F 7 Time measurement Accuracy The unit (gate) time of measurement must be set at "10 sec." and the measurement must be performed in the form of complete watch. 10 sec 10 sec 10 sec Push A Setting the Time Push B Setting the Set CRONOGRAP hands to reset
3 The Miyota Newsletter To provide updated information about MIYOTA watch movements as well as other information about the watch industry, we have started issuing The Miyota Newsletter. To subscribe the newsletter timely, please send an as follows. To : miyota-newsletter_subscribe@citizen.co.jp Subject : newsletter * Just read this QR code! 1
4 G SERIES UP-GRADE 6¾ 8''' 8¾''' 10½''' The new IC is designed for detecting external shock and blocking a second hands from skipping. Giving you more flexibility for hands selection. The balanceable weight figure of center second hands improves as follows: 1//4XX Series G Series JP Series JS Series 0S Series *except 0S80/90 FS Series *except FS80/ µNm 0.09µNm 0.07µNm 0.09µNm 0.09µNm 0.07µNm 0.09µNm 0.07µNm 0.11µNm 0.05µNm 0.08µNm
5 BASIC ands ands ands ands Day / ands / Enlarged Calendar ands / / Wide Day Basic 6¾ 8''' Features of Super 05 4 Years Battery Life Fine Gold Colour igh Accuracy of ±15 sec/month Covered Coil Super 05 GILT height.15mm 4 years battery life (SR66SW) igh and Pg.18 igh and Pg height.15mm years battery life (SR66SW) 05 height.15mm years battery life (SR66SW) 015 height 4.15mm years battery life (SR66SW) 005 height 4.15mm years battery life (SR66SW) 10½''' igh and Pg.18 05G height.15mm years battery life (SR66SW) 115 height 4.15mm years battery life (SR66SW) 105 height 4.15mm years battery life (SR66SW) 11½''' igh and Pg.18 igh and Pg height 4.15mm years battery life (SR66SW) 05 height 4.15mm years battery life (SR66SW) 5 height 4.15mm years battery life (SR66SW) 50 height 4.15mm years battery life (SR66SW) 1½''' igh and Pg height 4.5mm years battery life (SR66SW) 405 height 4.5mm years battery life (SR66SW) 45 height 4.5mm years battery life (SR66SW)
6 Slim / Small SLIM G SERIES ands ands ands ands ands Day / 6¾ 8''' igh and Pg.18 Up-Grade Up-Grade igh and Pg.18 GL0 GILT height.8mm 5 years battery life (SR61SW) GL15 GILT height.71mm 5 years battery life (SR61SW) GL0 GILT height.8mm GL10 GILT height.71mm GL00 GILT height.94mm 8¾''' Up-Grade Features of Series G Slim Assembled our Wheel Non Breakable Construction (GL10/GL15/GM10/GM15/GN10/GN15) Dust Proof Covered Coil Super Quick Adjusting Easy Assembling on Flat Desk GN15 GILT height.71mm 5 years battery life (SR61SW) 10½''' Up-Grade GN10 GILT height.71mm GM15 GILT height.71mm 5 years battery life (SR61SW) GM10 GILT height.71mm GM00 GILT height.94mm 1L/1S SERIES ands ands Day / 11½''' 1S1 GILT height.71mm 1S0 GILT height.07mm Size 8 ¾''' 8 ¾''' Cal. GL0 GL0 GL15 GL10 GL00 GN15 GN10 GM15 GM10 GM00 Cal. ( 1L ) 1L 1L15 1L1 1L0 ( 1N1 ) 1M15 1M1 1M0 eight.8 mm (.15mm ).8 mm.71 mm.71 mm.94 mm.71 mm.71 mm (.58mm ).71 mm.71 mm.94mm ands hands hands hands hands hands hands hands hands hands hands Battery Life 5 years years 5 years years years 5 years years 5 years years years ( years ) ( years ) ( years ) Battery SR61SW SR61SW SR61SW SR61SW SR61SW SR61SW SR61SW SR61SW SR61SW SR61SW ( SR616SW ) ( SR616SW ) 4
7 SUPER SLIM ands ands ands ands 6¾ 8''' 9U15 Slim / Small 9T GILT height 1.90mm years battery life (SR616SW) 9T GILT height 1.90mm years battery life (SR616SW) battery detector function 10½''' 9T15 GILT height.mm years battery life (SR616SW) 9T1 GILT height.mm years battery life (SR616SW) battery detector function 9U15 GILT height.mm 4 years battery life (SR916SW) 9U1 GILT height.mm 4 years battery life (SR916SW) battery detector function 8.6mm 9T SMALL & SLIM ands ands ands 5R1 4''' 4¾''' igh and Pg.18 4S0 GILT height.95mm years battery life (SR51SW) size: ø9.9 x 9.4mm 5R1 GILT height 1.90mm 4 years battery life (SR416SW) size: 9.0 x 1. x 1.5mm 5R GILT height.00mm years battery life (SR416SW) size: 9.0 x 1. x 1.5mm 1.6mm ands ands 5½ 6¾''' igh and Pg.18 igh and Pg.18 5Y0 GILT height.54mm 4 years battery life (SR51SW) 5Y0 GILT height.54mm years battery life (SR51SW) 5
8 SPECIAL-FUNCTION 6P MULTI SERIES 10½''' igh and Pg.18 igh and Pg.18 Multifunction 6P height.45mm eyes (/4 hour) 6P5 height.45mm eyes (Day/) 6P height.45mm eyes (/4 hour) 6P6 height.45mm 1 eye () 6P8 height.45mm 1 eye (4 hour) igh and Pg.18 igh and Pg.18 6P0 6P05 height.45mm eyes (Day//Month) 6P7 height.45mm eyes (Day//4 hour) 6P9 height.45mm eyes (Day//4 hour) igh and Pg.18 6P88 height.85mm/month disc eyes (Day/4 hour) 6P89 height.85mm/month disc eyes (Day//4 hour) 6P09 height.45mm 4 eyes (Month/Day//4 hour) 7.0mm moon phase moon phase moon phase moon phase 6P00 height.45mm 4 eyes (Day//Month/Moon) 6P0 height.45mm eyes (Day//Moon) 6P1 height.45mm eyes (Day//Moon) 6P4 height.45mm 1 eyes (Moon) moon phase 6P80 height.85mm / date pointer 1 eyes (Moon) / discs (Day/Month) 6
9 SMALL SECOND SERIES 6¾ 8''' ands / Small Second 1½''' 1L40 GILT height.9mm small second for LADIES' 1L45 GILT height.9mm small second for GENTS' 0T45 Multifunction ands Small Second 0T45 height 4.1mm small second 5 years battery life (SR97W) 4.0mm OTERS DISC SECOND 10 YEARS BATTERY LIFE 6¾ 8''' 6¾ 8''' 10½''' ands Disc Second ands ands ands Day / 04 height.15mm high-torque for second-disc 14 months battery life (SR66SW) 1L60 height 4.0mm 10 years battery life (CR1616) S60 height.99mm 10 years battery life (CR01) S65 height 4.mm 10 years battery life (CR01) 7
10 SPECIAL-FUNCTION JP MULTI SERIES 1½''' JP5 Dual Time(6) Dual Time(6) Dual Time(6) Multi / Chrono JP15 height 4.0mm Day//4 hour(1) years battery life(sr61sw) JP5 height 4.0mm Day//4 hour() years battery life(sr61sw) JS05, JS15, JS5, JP15, JP5, JP11 Case Compatible (height 4.0mm) JP11 height 4.0mm /4 hour(1) years battery life (SR61SW) 4.0mm JS STOP WATC SERIES with DATE (CRONOGRAP FUNCTION) JS5 1½''' igh and Pg.19 igh and Pg.19 igh and Pg.19 JS05 height 4.0mm stopwatch 0min/sec, 4 hour years battery life (SR61SW) JS15 height 4.0mm stopwatch 0min/sec, 4 hour years battery life (SR61SW) JS5 height 4.0mm stopwatch 0min/sec, 4 hour years battery life (SR61SW) 4.0mm JS05, JS15, JS5, JP15, JP5, JP11 Case Compatible (height 4.0mm) CALENDAR VARIATION COMPUTER SMARTPONE miyotamovement.com ALL OPTIONS ERE 8
11 JR MULTI SERIES 1½''' JR00 height 4.18mm retrograde day//4 hour years battery life(sr61sw) JR10 height 4.18mm retrograde day//4 hour years battery life(sr61sw) JR0 height 4.18mm retrograde day//4 hour years battery life(sr61sw) JR00, JR10, JR0, JS00, JS10, JS0, JS50, JS55 Case Compatible (height 4.18mm) JS STOP WATC SERIES (CRONOGRAP FUNCTION) 1½''' Parallel Push Button Available Multi / Chrono JS00 height 4.18mm stopwatch 0min/sec, 4 hour years battery life (SR61SW) JS10 height 4.18mm stopwatch 0min/sec, 4 hour years battery life (SR61SW) JS0 height 4.18mm stopwatch 0min/sec, 4 hour years battery life (SR61SW) JS50 height 4.18mm stopwatch 0min/sec, 4 hour years battery life (SR61SW) JS55 height 4.18mm stopwatch 0min/sec, 4 hour years battery life (SR61SW) JR00, JR10, JR0, JS00, JS10, JS0, JS50, JS55 Case Compatible (height 4.18mm) 9
12 CENTER CRONOGRAP 0S series 1-1 /''' 6S series 15''' FS series 10-1 /''' Center Chrono height 5.10 chrono min / sec,4 hour min case size : 8 ~ height 4.90 chrono min / sec, 1/0 second min case size : 4 ~ height 5.10 chrono min / sec,4 hour min case size : ~ What's TACYMETER? Center Chronograph allows TACYMETER function to be designed. TACYMETER is for measuring the approximate speed of vehicle.
13 CENTER CRONOGRAP 6S SERIES 15''' Chrono (1/0 Second) 6S10 height 4.90mm chrono min / sec, 1/0 second 4 years battery life (SR97W) Chrono (1/0 Second) 6S0 height 4.90mm chrono min / sec, 1/0 second 4 years battery life (SR97W) Chrono (1/0 Second) 6S0 height 4.90mm chrono min / sec, 1/0 second 4 years battery life (SR97W) Center Second and Chronograph Quick Reset (by eart Cam Reset System) Click Feeling Push Button andling (by eart Cam Reset System) 4 Beats Center Chrono Second and Balanceable Weight of ands Minute and Max. 1.00μNm Center Chrono Second and Max. 0.40μNm Other Small ands Max. 0.04μNm igh and Standard 6S11 height 4.90mm chrono min / sec 4 years battery life (SR97W) Chrono 6S1 height 4.90mm chrono min / sec years battery life (SR97W) Chrono 450µ 450µ 1650µ center hand height 100µ small hand height Center Chrono 6S50 height 5.95mm chrono min / sec, 1/0 second 4 years battery life (SR97W) Big Chrono Retrograde (1/0 Second) 6SA Chrono height 4.90mm (1/0 Second) chrono hour / min / sec, 1/0 second 4 years battery life (SR97W) New MON 6S00 height 5.5mm chrono min / sec, 1/0 second 4 years battery life (SR97W) Day Chrono (1/0 Second) 11
14 CENTER CRONOGRAP 0S BASIC SERIES 0S00 1½''' igh and Pg.19 igh and Pg.19 igh and Pg.19 0S10 height 4.1mm chrono hour / min / sec 5 years battery life (SR97W) 0S0 height 5.10mm chrono min / sec, 4 hour 5 years battery life (SR97W) 0S00 height 5.10mm chrono hour / min / sec 5 years battery life (SR97W) Day 44.5mm 0S1 Center Chrono 0S11 height 4.1mm chrono min / sec 5 years battery life (SR97W) 0S1 height 5.10mm chrono min / sec, 4 hour 5 years battery life (SR97W) 0S0 height 4.1mm chrono hour / min / sec 5 years battery life (SR97W) 40.0mm 0S PROFESSIONAL SERIES except 0S80 and 0S90 1½''' Chrono 0S60 (1/0 Second) height 4.1mm chrono hour / min / sec, 1/0 second years battery life (SR97W) Chrono 0S5 (1/0 Second) height 5.10mm chrono min / sec, 1/0 second, 4 hour years battery life (SR97W) Alarm 0S80 Chrono (1/0 Second) height 4.68mm chrono min / sec, 1/0 second, alarm years battery life (SR97W) Chrono 0S90 (1/100 Second) height 4.1mm chrono min / sec, 1/100 second, 4 hour years battery life (SR97W) Retrograde Chrono 0S6 (1/0 Second) height 4.1mm chrono hour / min / sec, 1/0 second years battery life (SR97W) Retrograde Chrono 0S (1/0 Second) height 5.10mm chrono min / sec, 1/0 second, 4 hour years battery life (SR97W) Center Second and Chronograph Quick Reset (by eart Cam Reset System) Click Feeling Push Button andling (by eart Cam Reset System) Center Chrono Second and Max. 0.11μNm (except 0S80,0S90) 1
15 FS SERIES 10½''' except FS80 and FS81 Parallel Push Button Available FS60/FS61 FS00/FS01 FS0/FS1 FS80/FS81 FS10/ FS11 igh and Pg.19 igh and Pg.19 igh and Pg.19 FS00 height 4.1mm chrono min / sec, 4 hour years battery life (SR66SW) FS10 height 5.10mm chrono min / sec, 4 hour years battery life (SR66SW) FS0 height 5.10mm chrono min / sec, 4 hour years battery life (SR66SW) FS00 6T8 Day / FS60 height 5.10mm chrono min / sec, retrograde day years battery life (SR66SW) Day / Retrograde Chrono (0 Minute) FS80 height 5.10mm chrono min retrograde, chrono sec, retrograde day years battery life (SR66SW) Center Chrono 4.0mm Center Second and Chronograph Quick Reset (by eart Cam Reset System) Click Feeling Push Button andling (by eart Cam Reset System) Dual Time FS16 height 5.10mm chrono min / sec, 4 hour years battery life (SR66SW) Dual Time FS6 height 5.10mm chrono min / sec, 4 hour years battery life (SR66SW) FS10, FS0, FS60, FS80 Case Compatible (height 5.10mm) FS16, FS6 Case Compatible (height 5.10mm) FS11, FS1, FS61, FS81 Case Compatible (height 5.5mm) 1
16 9 series JAPAN 9015 MADE PREMIUM SLIM 11 1/''' eight.9mm 4.0mm Mechanical 9015 height.9mm / hands with date 8800 vibrations per hour / 4 jewels 90S5 MULTI FUNCTION 1 1/''' 9100 height 5.5mm power reserve hands with date month / day / 4h 8800 vibrations per hour 6 jewels height.9mm / hands 8800 vibrations per hour / 4 jewels 9100 VARIATION *No Power Reserve *No Power Reserve 14
17 MECANICAL BASIC Automatic ands ands Day / ands / / Wide Day 11½''' 1''' 815 height 5.67mm / 1 jewels quick date setting 805 height 5.67mm / 1 jewels quick day / date setting bilingual weekday 885 height 5.94mm / 1 jewels quick day / date setting 11½''' 815 GILT height 5.67mm / 1 jewels quick date setting 805 GILT height 5.67mm / 1 jewels quick day / date setting bilingual weekday BASIC SMALL SIZE Automatic 8¾''' 6T15 height 5.98mm / 1 jewels quick date setting 6T51 height 5.98mm / 1 jewels quick date setting bilingual weekday 6T51 GILT height 5.98mm / 1 jewels quick date setting bilingual weekday Mechanical FRONT VIEW SKELETON Automatic 6T8 8¾''' New 6T8 height 5.mm / 1 jewels 1.0mm 15
18 MECANICAL FINE FINISING Automatic 11½''' ands ands ands Day / A height 5.67mm / 1 jewels quick date setting 81A-1D height 5.67mm / 1 jewels quick date setting 80A height 5.67mm / 1 jewels quick day / date setting bilingual weekday ands / 4 ands / Small Second ands / Small Second / 4 4.0mm 817 height 5.67mm / 1 jewels quick date setting 818 height 5.67mm / 1 jewels quick date setting 819 height 5.67mm / 1 jewels quick date setting FRONT VIEW SKELETON Automatic Gilt Gilt Version Available Mechanical 11½''' ands ands / Small Second ands / Small Second / 4 8S0 8S0 height 5.67mm / 1 jewels 8S5 height 5.67mm / 1 jewels 8S7 height 5.67mm / 1 jewels mm
19 SKELETON Automatic 11½''' 8N4 Silver height 5.55mm / 1 jewels 8N4 GILT height 5.55mm / 1 jewels 8N40 11½''' ands / Small Second New New 8N40 Silver height 5.55mm / 1 jewels 8N40 GILT height 5.55mm / 1 jewels 9.0mm 11½''' ands / Small Second / 4 8D7 New New Mechanical 8D7 Silver height 5.67mm / 1 jewels 8D7 GILT height 5.67mm / 1 jewels [ 8D7 ] 8S7 case compatible (height 5.67mm) 40.0mm 17
20 igh and 18 BASIC 6P SERIES 6P/6P7 6P5/6P75 6P7/6P57/6P77 6P9/6P79 6P89/6P8B SLIM / SMALL SUNDAY 0 50µ 460µ 1850µ 5Y6 150µ 5Y0 800µ 5R 100µ 5R1 800µ GL6 100µ GL0 50µ 800µ 6P/6P5/6P7 6P9/6P89 00µ 80µ 110µ 750µ 6P7/6P75 6P77/6P79 00µ 80µ 150µ 1150µ 6P57/6P8B 00µ 80µ 150µ 750µ GL0 00µ 50µ 800µ GL6 00µ 60µ 1500µ 5Y0 00µ 800µ 5Y6 0µ 150µ 50 50µ 1100µ 57 50µ µ µ 500µ 950µ µ 500µ 100µ µ 1100µ 0A 450µ 500µ 09 00µ 00µ 1700µ µ 100µ 05 50µ 850µ µ 850µ 06 50µ IG AND SERIES
21 igh and 19 JS SERIES JS05/JS06 JS15/JS16 JS5/JS6 FS SERIES FS00/FS0 FS10/FS1 FS0/FS 0S00/0S06 0S SERIES 0S10/0S1A/0S1F 0S0/0SB/0SA/0SF JS05/JS15/JS5 450µ 150µ 800µ JS06/JS16/JS6 450µ 1800µ 150µ 0S06 50µ 80µ 1650µ 100µ 0S00 50µ 80µ 100µ 750µ 0S1F 50µ 150µ 1150µ 0S1A 450µ 1600µ 1150µ 0S10 00µ 100µ 750µ 0S0 50µ 80µ 100µ 750µ FS00 00µ 100µ 750µ FS0 50µ 1750µ 100µ FS 00µ 1600µ 100µ FS0 00µ 100µ 750µ FS1 00µ 1600µ 100µ FS10 00µ 100µ 750µ 0SB 50µ 80µ 1650µ 750µ 0SA 50µ 80µ 1650µ 100µ 0SF 40µ 000µ 100µ 0S1F
22 INDEX BASIC ands / ands ands with G Super mm.15mm ands with Day /.15mm.15mm 4.15mm 4.15mm 4.15mm 1 ½''' 4.5mm mm 4.15mm 4.15mm 1 ½''' 4.5mm Large calendar 10 Years Battery L60 10 S60 10 S mm 1 ½''' 4.5mm 4.15mm 4.0mm.99mm 4.mm SLIM ands / ands GL0 5 9T GL0 9T.8mm 1.90mm.8mm ands / ands with GL15 5 GN15 5 GM mm 9T15 9U15 4 GL10 GN10 GM10 1S1 9T1 9U1 4.71mm 8 ¾'''.71mm.71mm.mm.mm.71mm 8 ¾'''.71mm.71mm.71mm.mm.mm ands with Day / Small Second / Disc GL00 GM00 1S0 1L40 1L45 0T mm.94mm.07mm.9mm.9mm 1 ½''' 4.1mm.15mm Extreme Small 5Y0 4 5Y0 5R1 4 5R 4S0 5 ½ 6 ¾'''.54mm 5 ½ 6 ¾'''.54mm 4 ¾''' 1.90mm 4 ¾'''.00mm 4'''.95mm MECANICAL Calendar T A 80A 6T mm 5.67mm 8 ¾''' 5.98mm 5.67mm 5.67mm 5.67mm 8 ¾''' 5.98mm 1''' 5.94mm Skeleton 90S5 8N4 8S0 6T8 8S5 8S7 8D7 8N40.90mm 5.55mm 5.67mm 8 ¾''' 5.mm 5.67mm 5.67mm 5.67mm 5.55mm Eye & Calendar Power Reserve Index mm 5.67mm 5.67mm 1 ½''' 5.5mm 1 ½''' 5.5mm 1 ½''' 5.5mm 1 ½''' 5.5mm 1 ½''' 5.5mm 1 ½''' 5.5mm 0
23 MULTIFUNCTION Eyes / 4 Eyes 6P05 6P7 6P89 6P9 6P09 JP15 JP5.45mm.45mm.85mm 1 Eye / Eyes.45mm.45mm 1 ½''' 4.0mm 1 ½''' 4.0mm 6P 6P 6P5 6P6 6P8 6P88 JP11.45mm Moon Phase.45mm.45mm.45mm.45mm.85mm 1 ½''' 4.0mm 6P00 6P0 6P1 6P4 6P80.45mm.45mm.45mm.45mm.85mm Retrograde JR00 JR10 JR0 1 ½''' 4.18mm 1 ½''' 4.18mm 1 ½''' 4.18mm CRONOGRAP Vertical Eyes 6S00 4 6S10 4 0S00 5 0S10 5 0S0 5 0S60 0S80 0S90 FS10 FS16 15''' 5.5mm 15''' 4.90mm 1 ½''' 5.10mm 1 ½''' 4.1mm 1 ½''' 4.1mm 1 ½''' 4.1mm 1 ½''' 4.68mm 1 ½''' 4.1mm 5.10mm 5.10mm JS10 JS15 1 ½''' 4.18mm 1 ½''' 4.0mm orizontal Eyes 6S0 4 6S50 4 0S0 5 0S5 FS0 FS6 JS0 JS5 15''' 4.90mm Eyes 6S0 4 15''' 5.95mm FS00 1 ½''' 5.10mm JS00 1 ½''' 5.10mm JS mm JS mm JS55 1 ½''' 4.18mm 1 ½''' 4.0mm 15''' 4.90mm Eyes 4.1mm 1 ½''' 4.18mm 6S11 4 6S1 0S11 5 0S1 5 1 ½''' 4.0mm 1 ½''' 4.18mm 1 ½''' 4.18mm 15''' 4.90mm 15''' 4.90mm 1 ½''' 4.1mm 1 ½''' 5.10mm Retrograde Eyes 6SA 4 0S6 0S FS60 FS80 15''' 4.90mm 1 ½''' 4.1mm 1 ½''' 5.10mm 5.10mm 5.10mm = Battery Life ( years ) = igh and Available = Gilt Version Available 1
24 MOVEMENT DIVISION Tokyo ead Office Address : 6-1-1, Tanashi-Cho, Nishi Tokyo-Shi, Tokyo, , Japan Phone : Fax : ong Kong Office Address : Flat A, 4/F., ung Mou Industrial Building, 6 ung To Road, Kwun Tong, Kowloon, ong Kong Phone : Fax : Europe Office Address : ans-duncker-straße 8, 105 amburg, Germany Phone : ome Page : miyotamovement.com miyota_mvt@citizen.co.jp Specifications are subject to change without advance notice. Images may have difference from actual products.
METAL MOVEMENT MADE IN JAPAN
2018-2019 METAL MOVEMENT MADE IN JAPAN Cal. 2035 2035 the representative movement of MIYOTA. After the 2035 has appeared to the market, a lot of brands is using regularly all over the world. JAPAN MOVEMENT
More informationPARTS CATALOGUE / TECHNICAL GUIDE
PRTS CTLOGUE / TECHNICL GUIDE [SPECIFICTIONS] Cal. 7T62/7T92/7T94 Item Cal. No. 7T62 7T92 7T94 Movement The illustrations refer to Cal. 7T62. (x 1.0) Movement size Outside diameter Casing diameter Ø 27.6
More informationPARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE [SPECIFICATIONS] Item Movement Cal. No. V653B Movement size Outside diameter Casing diameter Height ø29.5 mm 26.0 mm between 3 o clock and 9 o clock sides ø28.8 mm 3.7
More informationCal. YM92A. φ27.0 mm H 3.7 mm. S.EPSON Products
Cal. YM92A φ27.0 mm H 3.7 mm Items Rev. Page Specifications 03 1 Appearance 00 2 Casing 03 3 Hand fitting 01 4 Hand setting stem 01 5 Dial-01 01 6-01 Dial-02 00 6-02 Dial-03 00 6-03 Dial-04 00 6-04 Casing
More informationRevised on : 29. Feb TECHNICAL GUIDE PARTS CATALOGUE. Cal.VK61/64 ANALOGUE QUARTZ. SII Products
Revised on : 29. Feb. 2016 TECHNICAL GUIDE & PARTS CATALGUE Cal. ANALGUE QUARTZ [SPECIFICATIN] Item PARTS CATALGUE / TECHNICAL GUIDE Cal. Cal. No. VK61 VK64 Version03 Movement Movement size Time indication
More informationIssued on: 11. May TECHNICAL GUIDE PARTS CATALOGUE. Cal.VK61/64 ANALOGUE QUARTZ. SII Products
Issued on: 11. May. 2012 TECHNICAL GUIDE & PARTS CATALGUE Cal. ANALGUE QUARTZ [SPECIFICATIN] Item PARTS CATALGUE / TECHNICAL GUIDE Cal. Cal. No. VK61 VK64 Movement Movement size utside diameter Casing
More informationRevised on : 29. Feb TECHNICAL GUIDE PARTS CATALOGUE. Cal.VK63/67/83 ANALOGUE QUARTZ. SII Products
Revised on : 29. Feb. 2016 TECHNICAL GUIDE & PARTS CATALGUE Cal. ANALGUE QUARTZ [SPECIFICATIN] PARTS CATALGUE / TECHNICAL GUIDE Cal. Cal. No. Item VK63 VK67 VK83 Version04 Movement Movement size Time indication
More informationCal. VR33A CHRONOGRAPH 13 1/ mm. 3 years. Ø 30.6mm. Watch Movement Specification and Drawing. Movement Size. Casing Diameter.
Watch Movement Specification and Drawing CHRONOGRAPH Cal. VR33A Movement Size 13 1/2 Casing Diameter Ø 30.6mm Height 3.97mm Battery Life 3 years Cal. VR33A Date: 31/Aug./'18 Items Rev. Page Specifications
More informationPARTS CATALOGUE / TECHNICAL GUIDE
PRTS CTLOGUE / TECHNICL GUIDE Cal. 7T62, 7T92 [SPECIFICTIONS] Item Cal. No. 7T62 7T92 Movement The illustrations refer to Cal. 7T62. (x 1.0) Movement size Outside diameter Casing diameter ø27.6 mm ø27.0
More informationPARTS LIST / TECHNICAL GUIDE Perpetual Calendar/Alarm Chronograph Cal. 7T86A
PARTS LIST / TECHNICAL GUIDE Perpetual Calendar/Alarm Chronograph [SPECIFICATIONS] Item Cal. No. Movement 7T86A 7T86A 3 hands (hour, minute, and small second hands) Interval of hands movements Driving
More informationADJUSTING THE TIME ADJUSTING THE DATE
manual Instructions for the use of the TW STEEL Models/ Canteen style hour hand Chronograph minute hand Chronograph second hand second hand (0) position button A minute hand 24-hour hand crowncap / normal
More informationPARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE [SPECIFICATIONS] Item Cal. No. 6T63A 3 hands (hour, minute, and small second hand) 24-hour indicator Date indicator Diameter Outside: Ø 30.8 mm Height: 5.1 mm Casing:
More informationTable of ConTenTs. Analog Chronographs 1/1 of a Second - Type C with small chronograph seconds and 24-hour hands 15
Table of ConTenTs 2- and 3-Hand Models 1 Date/Big Date Display Models - Type A 2 Date/Big Date Display Models - Type B 3 Automatic Models 4 Multi-Eye Models 5 Multi-Eye Models with Retrograde Day/Date
More informationPARTS CATALOGUE/TECHNICAL GUIDE Cal. 7D46A, 7D48A
PARTS CATALOGUE/TECHNICAL GUIDE Cal. 7D46A, 7D48A SPECIFICATIONS Item Cal. No. 7D46A, 7D48A Movement Movement Outside diameter size Casing diameter Height Time indication (Movement intervals) Driving system
More informationMAJOR REPAIR PRICES. Analogue $ Divers Analogue $ Analogue World Timer (2 movements) $ Digital $ Duo $188.
MAJOR REPAIR PRICES Major repair charges cover movement, service/repair or replacement including all parts* required, seals, battery and water resistant pressure test where applicable. (*Glass, dial, bezel,
More informationPARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE [SPECIFICATIONS] Item Movement Cal. No. Cal. 7N3C Cal. 7N33C Cal. 7N39C 7N3C 7N33C 7N39C Outside diameter The illustrations refer to Cal. 7N33C. ø4.0 mm 1.5 mm between
More informationNEW ZEALAND RETAIL REPAIR PRICE LIST
Table of Contents BATTERY SUPPLY & FITTING... 1 WATER RESISTANT PRESSURE TEST... 1 MINOR SERVICE... 1 CASE REPAIRS... 2 GLASSES... 2 HANDS... 3 DIALS... 3 BAND REPAIRS... 3 ADDITIONAL LINKS FOR RETAIL
More informationRevised on : 9. Mar TECHNICAL GUIDE PARTS CATALOGUE. Cal.VJ20C Cal.VJ21C ANALOGUE QUARTZ. SII Products
Revised on : 9. Mar. 2016 TECHNICAL GUIDE & PARTS CATALOGUE Cal.VJ20C Cal.VJ21C ANALOGUE QUARTZ [SPECIFICATION] Item PARTS CATALOGUE / TECHNICAL GUIDE Cal. No. VJ20C VJ21C VJ20C VJ21C Version-02 Movement
More informationCal.VJ5*B Series (VJ52/53/55)
Revised on : 05. Jun. 208 TECHNICAL GUIDE & PARTS CATALOGUE Series (VJ52/53/55) ANALOGUE QUARTZ PARTS CATALOGUE / TECHNICAL GUIDE [SPECIFICATION] Item Cal. No. Series Series VJ52B VJ53B VJ55B Version-02
More informationCal.VJ4*B Series (VJ42/43/45)
Revised on : 05. Jun. 2018 TECHNICAL GUIDE & PARTS CATALOGUE Series (VJ42/43/45) ANALOGUE QUARTZ [SPECIFICATION] Item PARTS CATALOGUE / TECHNICAL GUIDE Cal. No. Series Series VJ42B VJ43B VJ45B Version-02
More informationRevised on : 9. Mar TECHNICAL GUIDE PARTS CATALOGUE. Cal.VJ22B Cal.VJ24B ANALOGUE QUARTZ. SII Products
Revised on : 9. Mar. 2016 TECHNICAL GUIDE & PARTS CATALOGUE Cal.VJ22B Cal.VJ24B ANALOGUE QUARTZ PARTS CATALOGUE / TECHNICAL GUIDE VJ22B VJ24B [SPECIFICATION] Item Cal. No. VJ22B VJ24B Version-02 Movement
More informationRevised on : 05. Jun TECHNICAL GUIDE PARTS CATALOGUE. Cal.VJ23B Cal.VJ33B ANALOGUE QUARTZ. SII Products
Revised on : 05. Jun. 2018 TECHNICAL GUIDE & PARTS CATALOGUE Cal.VJ23B Cal.VJ33B ANALOGUE QUARTZ [SPECIFICATION] Item PARTS CATALOGUE / TECHNICAL GUIDE Cal. No. VJ23B VJ33B VJ23B VJ33B Version-02 Movement
More informationRevised on. : 05. Jun TECHNICAL GUIDE PARTS CATALOGUE. Cal.VJ12B Cal.VJ14B ANALOGUE QUARTZ. SII Products
Revised on. : 05. Jun. 2018 TECHNICAL GUIDE & PARTS CATALOGUE Cal.VJ12B Cal.VJ14B ANALOGUE QUARTZ [SPECIFICATION] PARTS CATALOGUE / TECHNICAL GUIDE VJ12B VJ14B Cal. No. Item VJ12B VJ14B Version-02 Movement
More informationCal. VS3JA SOLAR SERIES 10 1/ mm. Approx. 6 months. Ø 24.0mm. Watch Movement Specification and Drawing. Movement Size. Casing Diameter.
Watch Movement Specification and Drawing SOLAR SERIES Cal. VS3JA Movement Size 10 1/2 Casing Diameter Ø 24.0mm Height 3.47mm Running Time Approx. 6 months Date: 2/May/'17 Cal. VS3JA Items Rev. Page Features
More informationRETAIL REPAIR PRICE LIST
MAJOR REPAIR PRICES Major repair charges cover movement, service/repair or replacement including all parts* required, seals, battery and pressure test where applicable. *Glass, dial, bezel, case, band
More informationPARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE [SPECIFICATIONS] Cal. H021B Cal. H022A Cal. H023A Item Movement Cal. No. H021B, H022A, H023A Movement size Time indication Driving system Display system Outside diameter
More informationAUMINUM EECTROYTIC CAPACITORS RAIA EA TYPE PART NUMBER SYSTEM ( Ⅰ ) Series Rated Voltage Capacitance Tolerance ead orming Type ead ength Case imension Special Request (1) (2) (3) (4) (5) (6) (7) (8) (1)
More informationPARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE [SPECIFICATIONS] Item Movement Cal. No. Cal. 7T84A 7T84A (x 1.0) Movement size Time indication Driving system Outside diameter Casing diameter Height Additional mechanism
More informationPARTS CATALOGUE / TECHNICAL GUIDE Cal.NE57A Version-01 NE57A [SPECIFICATION] Cal. No. Item. Movement. Outside diameter. Movement size.
[SPECIFICATION] Item PARTS CATALOGUE / TECHNICAL GUIDE NE57A Cal. No. Movement Movement size Time indication Basic function Frequency Accuracy Duration time Outside diameter Static accuracy Winding the
More informationCal. VS75A SOLAR SERIES. 4.40mm. Approx. 6 months. Ø 27.0mm. Watch Movement Specification and Drawing. Movement Size. Casing Diameter.
Watch Movement Specification and Drawing SOLAR SERIES Cal. VS75A Movement Size 12 Casing Diameter Ø 27.0mm Height 4.40mm Running Time Approx. 6 months Cal. VS75A Date: 1/Sep./'15 Items Rev. Page Features
More informationCal. VS37A SOLAR SERIES 10 1/ mm. Approx. 6 months. Ø 24.0mm. Watch Movement Specification and Drawing. Movement Size. Casing Diameter.
Watch Movement Specification and Drawing SOLAR SERIES Cal. VS37A Movement Size 10 1/2 Casing Diameter Ø 24.0mm Height 2.98mm Running Time Approx. 6 months Date: 15/Dec./'17 Cal. VS37A Items Rev. Page Features
More informationCal. VR43A SOLAR SERIES 13 1/ mm. Approx. 4 months. Ø 30.6mm. Watch Movement Specification and Drawing. Movement Size. Casing Diameter.
Watch Movement Specification and Drawing SOLAR SERIES Cal. VR43A Movement Size 13 1/2 Casing Diameter Ø 30.6mm Height 4.52mm Running Time Approx. 4 months Date: 30/Nov./'17 Cal. VR43A Items Rev. Page Features
More informationPARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE [SPECIFICATIONS] Item Movement Cal. No. 3M62A (x 1.0) Movement size Outside diameter Casing diameter Height ø24.0 mm ø23.3 mm 4.2 mm Time indication Driving system Additional
More informationTIMEPIECES USER MANUAL
TIMEPIECES USER MANUAL Table of Contents Two Year Limited Warranty... 4 General Information: Water Resistance.... 6 Screw Down Crowns.... 7 Watches without a Calendar: Two Hand /Three Hand Models... 8
More informationPARTS LIST/ TECHNICAL GUIDE
/ TECHNICAL GUIDE Cal. 7S26C/7S36C [SPECIFICATIONS] Item Cal. No. 7S26C 7S36C 5 4 28 29 3 2 1 31 30 3 hands (hour, minute and second hands) Date indication Day indication Movement size Diameter Outside:
More informationRemote Control Unit (SS-10/11/12/21) Service Manual. Remote Control Unit. SoundSpace 10/11/12/21
Service Manual Remote Control Unit SoundSpace 0//2/2 CONTENTS. REMOVAL PROCEDURES... 2 2. MECHANISM ASS'Y AND PARTS LIST... 3 3. MOUNTING DIAGRAMS AND PARTS LIST... 5 3.. Main P.C.B. Ass'y/Sensor P.C.B.
More informationPARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE [SPECIFICATIONS] Item Movement Cal. No. Cal. 5T82A 5T82A (x 1.0) Movement size Time indication Driving system Outside diameter Casing diameter Height (Movement intervals)
More informationPARTS LIST / TECHNICAL GUIDE ANALOGUE SOLAR Cal. V175A [SPECIFICATIONS]
PARTS LIST / TECHNICAL GUIDE ANALOGUE SOLAR [SPECIFICATIONS] Item Cal. No. V175A 3 hands (hour, minute and small second hands), 24-hour indicator Diameter: Height: Outside 27.6 mm.casing 27.0 mm 4.4 mm
More informationTechnical Guide TG-19-C-074-E A CALIBRE Thermo-compensated
Technical Guide TG-19-C-074-E A Produced by : selrom Date : 19.07.2011 CALIBRE 5666 Version A 15 Ø 34.60 mm P4 P1 P3 P2 Version Thermo-compensated Height of movement 13.30 mm Number of jewels 9 Exclusive
More informationPARTS LIST / TECHNICAL GUIDE
PARTS LIST / ANALOGUE SOLAR [SPECIFICATIONS] Item Cal. No. V172A/V174A V172A V174A 3 hands (hour, minute and small second hands) 3 hands (hour, minute and small second hands), 24-hour indicator Diameter:
More informationRevised on : 25 November 2014 TECHNICAL GUIDE PARTS CATALOGUE. Cal.VC00/01E ANALOGUE QUARTZ. SII Products
Revised on : 25 November 2014 TECHNICAL GUIDE & PARTS CATALOGUE ANALOGUE QUARTZ PARTS CATALOGUE / TECHNICAL GUIDE Cal.VC00 / 01E [SPECIFICATION] Item Cal. No. VC00E VC01E Version-01 Movement Movement size
More informationRevised on : 23. May TECHNICAL GUIDE PARTS CATALOGUE. Cal.NH70/71 AUTOMATIC MECHANICAL. SII Products
Revised on : 23. May. 2018 TECHNICAL GUIDE & PARTS CATALOGUE AUTOMATIC MECHANICAL SII Products [SPECIFICATION] PARTS CATALOGUE / TECHNICAL GUIDE NH70 - NH71 Gilt version of NH70 Movement Movement size
More informationPARTS LIST / TECHNICAL GUIDE Automatic Cal.4R71A
[SPECIFICATION] Item PARTS LIST / TECHNICAL GUIDE Automatic Cal.4R71A Cal. No. 4R71A 3 Hands (Hour, Minute and Second hands) Movement Size Diameter Outside : φ27.4 mm Casing : φ27.0 mm Height : 5.32 mm
More informationWARRANTY / INSTRUCTIONS / REGISTRATION
WRRNTY / INSTRUCTIONS / REGISTRTION Founded in 1991, ndroid came to fruition through Wing Liangs fascination and dedication to create a futuristic timepiece that could combine the traditional values of
More informationCal. AS32A SOLAR SERIES 10 1/ mm. Approx. 4 months. Ø 23.3mm. Watch Movement Specification and Drawing. Movement Size. Casing Diameter.
Watch Movement Specification and Drawing SOLAR SERIES Cal. AS32A Movement Size 10 1/2 Casing Diameter Ø 23.3mm Height 4.61mm Running Time Approx. 4 months Date: 31/Oct./'16 Cal. AS32A Items Rev. Page Features
More informationPARTS LIST / TECHNICAL GUIDE
[SPECIFICATIONS] PARTS LIST / TECHNICAL GUIDE Automatic Item Cal. No. 4R35B/4R36A The figures below are Cal. 4R36A. 3 hands (hour, minute and second hands) Day and Date indication Movement size Diameter
More informationCal. VS22A SOLAR SERIES 7 3/ mm. Approx. 6 months. Ø 18.1mm. Watch Movement Specification and Drawing. Movement Size. Casing Diameter.
Watch Movement Specification and Drawing SOLAR SERIES Cal. VS22A Movement Size 7 3/4 Casing Diameter Ø 18.1mm Height 2.76mm Running Time Approx. 6 months Cal. VS22A Date: 29/Jun./'18 Items Rev. Page Features
More informationSpecific information for calibre 3603
Fig. 1.0 1.0 Assembling of date indication 1. Stem in position 3 : Turn anti-clockwise the driving wheel for date unlocking yoke (reference 33029) until the finger of this wheel is aligned with the pin,
More informationTRADITION INDEPENDENT CHRONOGRAPH 7077 HISTORY IS STILL BEING WRITTEN...
TRADITION INDEPENDENT CHRONOGRAPH 7077 HISTORY IS STILL BEING WRITTEN... TRADITION INDEPENDENT CHRONOGRAPH 7077 HISTORY IS STILL BEING WRITTEN... THE INDEPENDENT CHRONOGRAPH 7077 IS EQUIPPED WITH TWO
More informationThe chronograph calibres CHRO PC 17 jewels CHRO C12 PC 17 jewels CHRO C12 PC AMPM GMT 17 jewels CHRO PC CAL 17 jewels
Technical guide The chronograph calibres 860 27 CHRO PC 17 jewels 861 27 CHRO C12 PC 17 jewels 910 27 CHRO C12 PC AMPM GMT 17 jewels 930 27 CHRO PC CAL 17 jewels o 27.00 mm / Power-reserve Jewel number
More information2. Uncasing. 5. Remove the clamp screws (casing ring / middle and movement / casing ring) and the clamps. 6. Remove the casing ring.
Calibre 360 1. Presentation 2. Uncasing 3. Chronograph movement (module) / M2 replacement procedure 4. Overhauling the base movement 5. Assembling the base movement with the chronograph movement 6. Chronograph
More informationLambretta. watches. catalogue collection
Lambretta watches catalogue 2010 collection To those around in the 1960 s, the name Lambretta is synonymous with the original Modmobile; the Lambretta Scooter, and the distinctive Italian influenced style
More informationThe Koyo Philosophy. Craftsmanship with Heart and Technology. Koyo has over the past 100 years created and. manufactured a wide variety of functional
The Koyo Philosophy Craftsmanship with Heart and Technology Koyo has over the past years created and manufactured a wide variety of functional components that make the furniture and equipment we use today
More informationWARRANTY & WATCH CARE
WARRANTY & WATCH CARE WARRANTY & WATCH CARE CONTENT WARRANTY & user INSTRUCTIONS. Warranty Page 3 Instructions Model - 1968 - Chronograph Pages 5-9 Instructions Model - BOLT-68-3 Hands & GMT Pages 11-13
More informationTECHNICAL GUIDE PARTS CATALOGUE. Cal.NE20 AUTOMATIC MECHANICAL. SII Products
TECHNICAL GUIDE & PARTS CATALOGUE AUTOMATIC MECHANICAL [SPECIFICATION] Item PARTS CATALOGUE / TECHNICAL GUIDE Version-01 NE20 Cal. No. Movement Movement size Time indication Basic function Frequency Accuracy
More informationCalibre General information for Calibre Exploded views for calibre Specific information for calibre
Technical Guide TG-19-C-024-E C Produced by : pelrom Date: 20.09.2010 3 Modifications: see last page CALIBRE 3220 Version A 131/4 Ø 30 mm Height on movement Power reserve Number of jewels Frequency Lift
More informationPOWER FACTOR METERS LF 72 / LF 96 ANALOGUE METERS
POWER FACTOR METERS - LF 72 / LF 96 Analogue Meters www.sifamtinsley.co.uk DATASHEET Multifunction Meters Transducers & Isolators Temperature Controllers Converters & Recorders Digital Panel Meters Current
More informationTemposonics. M-Series Analog. Absolute, Non-Contact Position Sensors. Temposonics MH Measuring length mm. Compact Sensor for Mobile Hydraulics
Temposonics Absolute, Non-Contact Position Sensors M-Series Temposonics MH Measuring length 50-2500 mm Compact Sensor for Mobile Hydraulics Linear, Absolute Measurement in Hydraulic Cylinders Contactless
More informationPRODUCTS C ATALOG. Serpent Products Catalog. ASCENT FAIR (HONG KONG) LTD. Your Innovative and Professional Flashlight Partner
Serpent Products Catalog ASCENT FAIR (HONG KONG) LTD. Your Innovative and Professional Flashlight Partner Unit 1&2, 26/F, I Hung To Road, Kwun Tong, Kowloon, Hong Kong Tel: (852) 2672 6691 Fax: (852) 2639
More informationPARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE [SPECIFICATIONS] Brand SEIKO Item Cal. No. 7S26B 7S36B Movement Movement size Outside diameter Casing diameter Height (x 1.5) Ø 27.4 mm Ø 27.0 mm 4.9 mm Time indication
More informationCALIBRE Q SCS CAL CORH CORM CORS 7 jewels Description et performances
Technical guide CALIBRE 1370 25.60 Q SCS CAL CORH CORM CORS 7 jewels Description et performances The caliber 1370, destined for a man's electronic watch with analogical display, is fitted with a quartz
More informationPARTS LIST / TECHNICAL GUIDE
PARTS LIST / TECHNICAL GUIDE Analogue Solar [SPECIFICATIONS] Item Cal. No. V114A 2 hands (hour, minute hands) Diameter Outside: Ø 15.5 mm x 11.8 mm Casing: Ø 15.15 mm x 11.80 mm Height: Ø 2.0 mm Interval
More informationTemposonics. M-Series Analog Redundant. Absolute, Non-Contact Positions Sensors. Temposonics MT Measuring length mm
Temposonics Absolute, Non-Contact Positions Sensors M-Series Document Part Number 551218 Revision D Temposonics MT Measuring length 50-1500 mm Redundant Sensor for Mobile Hydraulics Redundant Sensor System
More informationSIGMA SERIES DE METER
SIGMA SERIES DE METER Analogue Meters www.sifamtinsley.co.uk DATASHEET Issue 1.0 Multifunction Meters Transducers & Isolators Temperature Controllers Converters & Recorders Digital Panel Meters Current
More informationDial Gauges. Swiss style precision gear module design, accurate display, hardened aluminum alloy housing, assuring durability and reliability.
Features Dial Gauges Swiss style precision gear module design, accurate display, hardened aluminum alloy housing, assuring durability and reliability. Standard steel test tip Ø 3.175mm, hardened stainless
More informationSmart Look Series Meter
File No. E471457 Technical Data Sheet Smart Look Series Meter 1/2 The moving iron & moving coil panel meters sizes 2 " 1/2, 3 " are housed in a moulded polycarbonate cases which are suitable for the measurement
More informationRevised on : 07. Feb TECHNICAL GUIDE PARTS CATALOGUE. Cal.NE15C AUTOMATIC MECHANICAL. SII Products
Revised on : 07. Feb. 2018 TECHNICAL GUIDE & PARTS CATALOGUE AUTOMATIC MECHANICAL SII Products [SPECIFICATION] Item PARTS CATALOGUE / TECHNICAL GUIDE Version-02 NE15C Cal. No. Movement Movement size Time
More informationCaution for disassembling The hour wheel is made of engineering plastics. When pulling out the hour hand, take care not to damage the hour wheel.
III. REMRKS ON DISSSEMLING ND RESSEMLING Hands Dial Caution for disassembling The hour wheel is made of engineering plastics. When pulling out the hour hand, take care not to damage the hour wheel. How
More informationCal. VS17A SOLAR SERIES 5 1/ mm. 2.79mm. Approx. 6 months. Watch Movement Specification and Drawing. Movement Size.
Watch Movement Specification and Drawing SOLAR SERIES Cal. VS17A Movement Size 5 1/2 Casing Diameter 11.8 15.15 mm Height 2.79mm Running Time Approx. 6 months Date: 31/Aug/'17 Cal. VS17A Items Rev. Page
More informationTemposonics. M-Series PWM. Absolute, Non-Contact Position Sensors. Temposonics MH Measuring Length mm. Document Number Revision B
Temposonics Absolute, Non-Contact Position Sensors M-Series Temposonics MH Measuring Length 50-2500 mm Document Number 551225 Revision B Compact Sensor for Mobile Hydraulics Linear, absolute Measurement
More informationIf your vehicle is not equipped with the DIC steering wheel buttons not all of the features listed will be available on your vehicle.
2003 Yukon 4WD The DIC comes on when the ignition is on. After a short delay the DIC will display the current driver and the information that was last displayed before the engine was turned off. Report
More information1 change over contact. 1 make contact. 1 break contact
Uni Uni is one of the smallest two pole switches available today. The are capable of producing eight functions depending on PC board layout. The Uni switch is available in momentary and alternate action
More informationBimetal Thermometers Process Industry Series, Model 55
Mechanical Temperature Measurement Bimetal Thermometers Process Industry Series, Model 55 WIKA Data Sheet TM 55.01 Applications Chemical industry, petrochemical industry, process technology and food industry
More informationDPC-100 Series INSTRUCTION MANUAL WIRING I/O CIRCUIT DIAGRAMS PART DESCRIPTION
Sensor INSTRUCTI MANUAL Head Separated Digital Sensor Controller DPC-1 Series MJE-DPC1 No.7-98V Thank you very much for using SUNX products. Please read this Instruction Manual carefully and thoroughly
More information"ISHII" TILE CUTTING TOOLS - Japan
NO. S 70-1 "ISHII" PORTABLE PRO ACE CLINKER CUTTER NO. AWE-630XA The machine comes with JW aluminum curved handle, thick base sponges, long aluminum sliding extension side arm, 200mm protractor gauge and
More informationHigh Accuracy Eddy Current Type Displacement Sensor GP-A SERIES. Resolution 0.04 % F.S., Linearity ±0.5 % F.S., IP67G environment resistance
11 High Accuracy ddy Current Type Sensor SRIS Related Information General terms and conditions... F-7 Glossary of terms... P.1493 Sensor selection guide... P.1055~ General precautions... P.1501 PHOTO PHOTO
More informationPARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE PARTS CATALOGUE / TECHNICAL GUIDE (p. 1 21) CATÁLOGO DE PARTES / GUÍA TÉCNICA (p. 23 43) [SPECIFICATIONS] Item Movement Cal. No. 5J22A (x 1.0) Movement size Outside diameter
More informationMKT-TAISEI Co.,Ltd. CONTENTS
CONTENTS Piezoelectric Ceramics Information Piezoelectric Ceramics Cylinder Type C-series Piezoelectric Ceramics Disk Type D-series Dt-series W-series Ultrasonic Sensors Inquiries 2 3 4 5 6 7 8 MKT-TAISEI
More informationOPERATION & MAINTENANCE INSTRUCTIONS
PROFESSIONAL COIL SPRING COMPRESSOR MODEL NO: CHT747 PART NO: 1801747 OPERATION & MAINTENANCE INSTRUCTIONS LS0813 INTRODUCTION Thank you for purchasing this CLARKE Professional Coil Spring Compressor.
More informationPARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE PARTS CATALOGUE / TECHNICAL GUIDE (p. 1 22) [SPECIFICATIONS] Item Movement Cal. No. 5J32A (x 1.0) Movement size Outside diameter Casing diameter ø26.4 mm ø25.6 mm Height
More informationTemposonics. G-Series Analog Redundant. Magnetostrictive Position Sensors. Redundancy for enhanced safety
Temposonics Magnetostrictive Position Sensors m SENSORS G-Series Redundant Temposonics GT2 and GT3 Measuring length 25-1500 mm Redundancy for enhanced safety Up to 3 totally separated, independent measuring
More informationAll Rights Reserved by Shimano Inc.
FC-R9000-P Crankset with power meter 1 Professional use No Extra Quick / Direct response High Accuracy 2 FC-R9100-P Integrated design Reliable electric system Waterproof in all conditions Easy maintenance
More informationINSTRUCTION MANUAL G-550
INSTRUCTION MANUAL G-550 VERTEX STANDARD CO., LTD. 4-8-8 Nakameguro, Meguro-Ku, Tokyo 153-8644, Japan VERTEX STANDARD US Headquarters 17210 Edwards Rd., Cerritos, CA 90703, U.S.A. International Division
More informationTECHNICAL INFORMATION INFORMACION TECNICA
TECHNICL INFORMTION INFORMCION TECNIC CITIZEN QURTZ Cal. No. E76 (Cal. No. E760) ENGLISH Contents 1. FETURES...1 2. BEFORE USING...1 3. SPECIFICTIONS...2 4. SETTING THE TIME ND DTE...3 5. FUNCTIONS UNIQUE
More informationTechnical Guide TG-19-C-053-E C. Prod. by: pelrom Date: Modifications: see last page CALIBRE 1532
Technical Guide TG-19-C-053-E C Prod. by: pelrom Date: 24.10.2008 3 Modifications: see last page CALIBRE 1532 Version A Version B Version C Version D 11 1/2 Ø 25,60 mm 1 2 3 ASS E.O.L COR Height on movement
More informationTECHNICAL GUIDE PARTS CATALOGUE. Cal.NE15 AUTOMATIC MECHANICAL. SII Products
TECHNICAL GUIDE & PARTS CATALOGUE AUTOMATIC MECHANICAL [SPECIFICATION] Item PARTS CATALOGUE / TECHNICAL GUIDE Version-01 NE15 Cal. No. Movement Movement size Time indication Basic function Frequency Accuracy
More informationDirect solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Individual mounting Series Inline Oval shaped armature Encapsulated coil Push pin Manifold mounting Stacking Manifold base plug-in Manifold base plug-in
More information1.5. 7,250 psi Stainless steel V2A. 7,250 psi Stainless steel V2A. PUR cable type 3 IP 68 Embeddable 600 Hz Table 6 Diagram
43 1 1 14,9 47 1 9 9 7 Max. operating pressure Sensing face HIGH-PRESSURE-RESISTANT P12 see page 7 see page 14 9 Compatible connectors DW-AD-01-P12-39 DW-AD-03-P12-39 DW-AD-01-P12-2 DW-AD-01-P12-27 DW-AS-01-P12-24
More informationVAREA-METER FLOW MEASUREMENT BY-PASS TYPES
TECHNICAL INFORMATION VAREA-METER FLOW MEASUREMENT BY-PASS TYPES US Filter Wallace & Tiernan Products By-Pass Varea-Meter can measure high volume flows through any pipeline that can be equipped with a
More informationCircuit Protectors TBC05 E-03
Circuit Protectors TBC05 E-03 Contents Contents 1 Notice 1 Specifications ist 2 Example of Used 3 TBC5000 Series Manual Reset Type and Auto Reset Type 4 12 TBC6000 Series Manual Reset Type 13 17 Notice
More informationReference number: Worksheet/Receipt. Owners name: - Telephone: Description of item(s) received, including accessories:
Worksheet/Receipt Owners name: - Address: n/a Telephone: n/a Description of item(s) received, including accessories: Rotary quartz head only. Work required based on initial inspection: Watch does not run
More informationLES NOUVEAUTÉS OCTOBRE 2017
LES NOUVEAUTÉS OCTOBRE 2017 VINTAGE STYLE CALENDAR CALENDAR REF. WLAC03BUMM CALENDAR REF. WLAC03BOMM! VINTAGE STYLE CALENDAR REF. WLAC03BUMM ACIER AVEC CADRAN BLEU ET BRACELET MAILLE MILANAISE 159 ACIER
More informationTemposonics. M-Series Analogue / SIL2* Absolute, Non-Contact Position Sensors. Temposonics MH Measuring Length mm
Temposonics Absolute, Non-Contact Position Sensors M-Series / SIL2* Temposonics MH Measuring Length 50-2500 mm Compact Sensor for Mobile Hydraulics Linear, absolute Measurement in Hydraulic Cylinders Non-Contact
More informationTORQUE LIMITER SERIES 320
TORQUE IMITER SERIES 320 AUTOGARD SERIES 320 TORQUE IMITER Quality and Autogard are synonymous with overload protection. The company s reputation for high quality products is derived from over 35 years
More informationWedge Cam Operation Slide Guide. Air Gripper/2-Finger Type ø12, ø16, ø20, ø25. Option: Stainless steel
Wedge Cam Operation Slide Guide Air Gripper/2-inger Type ø2, ø, ø, ø2 MH MH oad Resistant, Dust Cover for Adverse Environments 2 types of finger materials types of dust cover materials Standard: Carbon
More informationServicing a Poljot 3133 movement
Servicing a Poljot 3133 movement A service guide made by WUS member SLLS, June 2015 Editor: WUS member Polmax3133 Use this guide at your own risk. To dismantle a 3133 movement, just start at the end of
More informationPARTS LIST /TECHNICAL GUIDE ANALOGUE SOLAR Cal. V157A/V158A [SPECIFICATIONS]
PARTS LIST /TECHNICAL GUIDE ANALOGUE SOLAR [SPECIFICATIONS] Cal. No. Item V157A V157A/V158A Movement V158A Diameter Outside: 28.6 mm Casing: 24.0 mm Height: 3.5mm 3 hands (hour, minute and second hands)
More informationA LH Series. LH Series. 2. Ball slide shape
Series -5-1.1 Series are also available in randam matcing. (Special ig-carbon steel products for 15 to 45) 2. all slide sape all slide Model Sape/installation metod ype (Upper row, Rating: ower row, all
More informationInverter Resistance Welder/Horizontal Pressure Head NRW-IN8400A/NA-184 Now Available
December 10, 2015 Nippon Avionics Co., Ltd. http://www.avio.co.jp/english/ Industry's Most Compact Welder! Current Stop Time Variation within 1 ms. High Reliability Welding for On-vehicle Motor Coils Inverter
More informationSHAPELINE PRODUCT OVERVIEW.
SHAPELINE PRODUCT OVERVIEW www.hella.com/shapeline CONTENT Introduction 2 Configuration tool Module overview 4 Technical data 4 28 Connector overview 29 Mounting instructions CUSTOMISED LIGHT DESIGN! The
More information