ADJUSTING THE TIME ADJUSTING THE DATE
|
|
- Kerry Lamb
- 6 years ago
- Views:
Transcription
1 manual
2 Instructions for the use of the TW STEEL Models/ Canteen style hour hand Chronograph minute hand Chronograph second hand second hand (0) position button A minute hand 24-hour hand crowncap / normal crown position button b DATE Use of the crowncap To adjust the time or set the date you first have to unscrew the crowncap anti clockwise. If you have unscrewed it, you will see the (small) crown. Follow the next instructions to adjust the time and date. After adjusting it, screw the crowncap clockwise back.
3 ADJUSTING THE TIME ADJUSTING THE DATE Using the chronograph changing the time adjusting the date Adjusting the time Pull the crown out to the 2nd click position so that the second hand stops at (0) position. Turn the crown to set the hour and minute hands. Adjusting the date Pull the crown out to the 1st position. Turn the crown to the left to set the date. After the date has been set, push the crown back to the normal position. Using the chronograph The chronograph is able to measure and display the time in 1/1 second united up to an maximum of 1 hour. The chronograph can be started and stopped each time button A is pressed. Pressing button B resets the chronograph. All hands return to their (0) position. If the chronograph second hand does not return to the (0) second position after the chronograph has been reset or after replacing the battery, you should do the following: Pull the crown out to the 2nd position. Press button A to set the chronograph second hand to the (0) position. The chronograph hands can be advanced rapidly by continuously pressing button A or B. Once the chronograph second hand has returned to the (0) position, return the crown to its normal position.
4 instructions for Grandeur Diver / Goliath Grandeur Collection / TECH collection Goliath Grandeur Diver Grandeur Collection TECH collection Goliath To set the time and date you can directly pull out the big crown to its 1st or 2nd position. Grandeur Collection If your model has a crowncap, please follow the instructions of the Canteen style. If your model has NO crowncap, you can directly pull out the big crown to its 1st or 2nd position to set the time and date. Grandeur Diver To set the time and date you first have to unscrew the big crown anti clockwise. You can now pull out the crown to its 1st or 2nd position. For al models follow the instructions of the Canteen Style for the use of the chronograph.
5 Using the chronograph of the tech models TECH collection To adjust the time and date of the Tech, you first have to unscrew the big crown anti clockwise. You can now pull out the crown to its 1st or 2nd position. Check the manual of the Canteen Style for further instructions on how to set the time and date. Use of the chrongraph for all Tech models The chronograph is able to measure and display the time in 1/20 second united up to a maximum of 59 min and 59 sec. The retrograde chronograph 1/20 second hand keeps running continuously for 30 seconds after starting and then stops at (o) position. Press button B to change the watch to the chronograph mode. The second hand stops at the (0) position and changes to the chronograph 1/20 second hand. The chronograph can be started and stopped each time button A is pressed. Pressing button B resets the chronograph. All hands return to their (0) position. If the chronograph second hand and the chronograph 1/20 second hand do not return to the (0) second position after the chronograph has been reset or after replacing the battery, you should do the following: Pull the crown out to the 2nd position. Press button A to set the chronograph second hand to the (0) position. Press button B to set the chronograph 1/20 second hand to (0) position. The chronograph hands can be advanced rapidly by continuously pressing button A or B. Once the hands have returned to the (0) position, return the crown to its normal position an screw the crown clockwise back on to the case. CAUTION: IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO LONGER WATER- PROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!
WARRANTY & WATCH CARE
WARRANTY & WATCH CARE WARRANTY & WATCH CARE CONTENT WARRANTY & user INSTRUCTIONS. Warranty Page 3 Instructions Model - 1968 - Chronograph Pages 5-9 Instructions Model - BOLT-68-3 Hands & GMT Pages 11-13
More informationCal. VR33A CHRONOGRAPH 13 1/ mm. 3 years. Ø 30.6mm. Watch Movement Specification and Drawing. Movement Size. Casing Diameter.
Watch Movement Specification and Drawing CHRONOGRAPH Cal. VR33A Movement Size 13 1/2 Casing Diameter Ø 30.6mm Height 3.97mm Battery Life 3 years Cal. VR33A Date: 31/Aug./'18 Items Rev. Page Specifications
More informationCal. VS75A SOLAR SERIES. 4.40mm. Approx. 6 months. Ø 27.0mm. Watch Movement Specification and Drawing. Movement Size. Casing Diameter.
Watch Movement Specification and Drawing SOLAR SERIES Cal. VS75A Movement Size 12 Casing Diameter Ø 27.0mm Height 4.40mm Running Time Approx. 6 months Cal. VS75A Date: 1/Sep./'15 Items Rev. Page Features
More informationTable of ConTenTs. Analog Chronographs 1/1 of a Second - Type C with small chronograph seconds and 24-hour hands 15
Table of ConTenTs 2- and 3-Hand Models 1 Date/Big Date Display Models - Type A 2 Date/Big Date Display Models - Type B 3 Automatic Models 4 Multi-Eye Models 5 Multi-Eye Models with Retrograde Day/Date
More informationCal. VR43A SOLAR SERIES 13 1/ mm. Approx. 4 months. Ø 30.6mm. Watch Movement Specification and Drawing. Movement Size. Casing Diameter.
Watch Movement Specification and Drawing SOLAR SERIES Cal. VR43A Movement Size 13 1/2 Casing Diameter Ø 30.6mm Height 4.52mm Running Time Approx. 4 months Date: 30/Nov./'17 Cal. VR43A Items Rev. Page Features
More informationCal. YM92A. φ27.0 mm H 3.7 mm. S.EPSON Products
Cal. YM92A φ27.0 mm H 3.7 mm Items Rev. Page Specifications 03 1 Appearance 00 2 Casing 03 3 Hand fitting 01 4 Hand setting stem 01 5 Dial-01 01 6-01 Dial-02 00 6-02 Dial-03 00 6-03 Dial-04 00 6-04 Casing
More informationTIMEPIECES USER MANUAL
TIMEPIECES USER MANUAL Table of Contents Two Year Limited Warranty... 4 General Information: Water Resistance.... 6 Screw Down Crowns.... 7 Watches without a Calendar: Two Hand /Three Hand Models... 8
More informationPARTS LIST / TECHNICAL GUIDE Perpetual Calendar/Alarm Chronograph Cal. 7T86A
PARTS LIST / TECHNICAL GUIDE Perpetual Calendar/Alarm Chronograph [SPECIFICATIONS] Item Cal. No. Movement 7T86A 7T86A 3 hands (hour, minute, and small second hands) Interval of hands movements Driving
More informationPARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE [SPECIFICATIONS] Item Cal. No. 6T63A 3 hands (hour, minute, and small second hand) 24-hour indicator Date indicator Diameter Outside: Ø 30.8 mm Height: 5.1 mm Casing:
More informationServicing a Poljot 3133 movement
Servicing a Poljot 3133 movement A service guide made by WUS member SLLS, June 2015 Editor: WUS member Polmax3133 Use this guide at your own risk. To dismantle a 3133 movement, just start at the end of
More informationCaution for disassembling The hour wheel is made of engineering plastics. When pulling out the hour hand, take care not to damage the hour wheel.
III. REMRKS ON DISSSEMLING ND RESSEMLING Hands Dial Caution for disassembling The hour wheel is made of engineering plastics. When pulling out the hour hand, take care not to damage the hour wheel. How
More informationC7 Rapide Chronograph COSC. Limited Edition Owner s handbook
C7 Rapide Chronograph COSC Limited Edition Owner s handbook Introduction Time on your side... Your Christopher Ward watch has been designed and engineered by highly talented craftspeople to ensure not
More informationPARTS CATALOGUE/TECHNICAL GUIDE Cal. 7D46A, 7D48A
PARTS CATALOGUE/TECHNICAL GUIDE Cal. 7D46A, 7D48A SPECIFICATIONS Item Cal. No. 7D46A, 7D48A Movement Movement Outside diameter size Casing diameter Height Time indication (Movement intervals) Driving system
More informationPARTS LIST/ TECHNICAL GUIDE
/ TECHNICAL GUIDE Cal. 7S26C/7S36C [SPECIFICATIONS] Item Cal. No. 7S26C 7S36C 5 4 28 29 3 2 1 31 30 3 hands (hour, minute and second hands) Date indication Day indication Movement size Diameter Outside:
More informationmiyotamovement.com QUICK & EASY ACCESS TO NECESSARY INFORMATION
017-018 and Start and Stop the chronograph Reset the chronograph DO NOT set Day and between 9:00pm 1:00am Center Chronograph Chronograph our Pusher Small Second Chronograph Minute Push A to reset the hands
More informationPARTS CATALOGUE / TECHNICAL GUIDE
PRTS CTLOGUE / TECHNICL GUIDE Cal. 7T62, 7T92 [SPECIFICTIONS] Item Cal. No. 7T62 7T92 Movement The illustrations refer to Cal. 7T62. (x 1.0) Movement size Outside diameter Casing diameter ø27.6 mm ø27.0
More informationPARTS LIST / TECHNICAL GUIDE ANALOGUE SOLAR Cal. V175A [SPECIFICATIONS]
PARTS LIST / TECHNICAL GUIDE ANALOGUE SOLAR [SPECIFICATIONS] Item Cal. No. V175A 3 hands (hour, minute and small second hands), 24-hour indicator Diameter: Height: Outside 27.6 mm.casing 27.0 mm 4.4 mm
More informationPARTS LIST / TECHNICAL GUIDE
PARTS LIST / ANALOGUE SOLAR [SPECIFICATIONS] Item Cal. No. V172A/V174A V172A V174A 3 hands (hour, minute and small second hands) 3 hands (hour, minute and small second hands), 24-hour indicator Diameter:
More informationCal. AS32A SOLAR SERIES 10 1/ mm. Approx. 4 months. Ø 23.3mm. Watch Movement Specification and Drawing. Movement Size. Casing Diameter.
Watch Movement Specification and Drawing SOLAR SERIES Cal. AS32A Movement Size 10 1/2 Casing Diameter Ø 23.3mm Height 4.61mm Running Time Approx. 4 months Date: 31/Oct./'16 Cal. AS32A Items Rev. Page Features
More informationCal. VS3JA SOLAR SERIES 10 1/ mm. Approx. 6 months. Ø 24.0mm. Watch Movement Specification and Drawing. Movement Size. Casing Diameter.
Watch Movement Specification and Drawing SOLAR SERIES Cal. VS3JA Movement Size 10 1/2 Casing Diameter Ø 24.0mm Height 3.47mm Running Time Approx. 6 months Date: 2/May/'17 Cal. VS3JA Items Rev. Page Features
More informationCal. VS37A SOLAR SERIES 10 1/ mm. Approx. 6 months. Ø 24.0mm. Watch Movement Specification and Drawing. Movement Size. Casing Diameter.
Watch Movement Specification and Drawing SOLAR SERIES Cal. VS37A Movement Size 10 1/2 Casing Diameter Ø 24.0mm Height 2.98mm Running Time Approx. 6 months Date: 15/Dec./'17 Cal. VS37A Items Rev. Page Features
More informationPARTS CATALOGUE / TECHNICAL GUIDE
PRTS CTLOGUE / TECHNICL GUIDE [SPECIFICTIONS] Cal. 7T62/7T92/7T94 Item Cal. No. 7T62 7T92 7T94 Movement The illustrations refer to Cal. 7T62. (x 1.0) Movement size Outside diameter Casing diameter Ø 27.6
More informationTechnical Guide TG-19-C-074-E A CALIBRE Thermo-compensated
Technical Guide TG-19-C-074-E A Produced by : selrom Date : 19.07.2011 CALIBRE 5666 Version A 15 Ø 34.60 mm P4 P1 P3 P2 Version Thermo-compensated Height of movement 13.30 mm Number of jewels 9 Exclusive
More informationWARRANTY / INSTRUCTIONS / REGISTRATION
WRRNTY / INSTRUCTIONS / REGISTRTION Founded in 1991, ndroid came to fruition through Wing Liangs fascination and dedication to create a futuristic timepiece that could combine the traditional values of
More informationPARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE [SPECIFICATIONS] Item Movement Cal. No. V653B Movement size Outside diameter Casing diameter Height ø29.5 mm 26.0 mm between 3 o clock and 9 o clock sides ø28.8 mm 3.7
More informationCal. VS22A SOLAR SERIES 7 3/ mm. Approx. 6 months. Ø 18.1mm. Watch Movement Specification and Drawing. Movement Size. Casing Diameter.
Watch Movement Specification and Drawing SOLAR SERIES Cal. VS22A Movement Size 7 3/4 Casing Diameter Ø 18.1mm Height 2.76mm Running Time Approx. 6 months Cal. VS22A Date: 29/Jun./'18 Items Rev. Page Features
More informationPARTS LIST /TECHNICAL GUIDE ANALOGUE SOLAR Cal. V157A/V158A [SPECIFICATIONS]
PARTS LIST /TECHNICAL GUIDE ANALOGUE SOLAR [SPECIFICATIONS] Cal. No. Item V157A V157A/V158A Movement V158A Diameter Outside: 28.6 mm Casing: 24.0 mm Height: 3.5mm 3 hands (hour, minute and second hands)
More informationRevised on : 29. Feb TECHNICAL GUIDE PARTS CATALOGUE. Cal.VK63/67/83 ANALOGUE QUARTZ. SII Products
Revised on : 29. Feb. 2016 TECHNICAL GUIDE & PARTS CATALGUE Cal. ANALGUE QUARTZ [SPECIFICATIN] PARTS CATALGUE / TECHNICAL GUIDE Cal. Cal. No. Item VK63 VK67 VK83 Version04 Movement Movement size Time indication
More informationRevised on : 29. Feb TECHNICAL GUIDE PARTS CATALOGUE. Cal.VK61/64 ANALOGUE QUARTZ. SII Products
Revised on : 29. Feb. 2016 TECHNICAL GUIDE & PARTS CATALGUE Cal. ANALGUE QUARTZ [SPECIFICATIN] Item PARTS CATALGUE / TECHNICAL GUIDE Cal. Cal. No. VK61 VK64 Version03 Movement Movement size Time indication
More informationIssued on: 11. May TECHNICAL GUIDE PARTS CATALOGUE. Cal.VK61/64 ANALOGUE QUARTZ. SII Products
Issued on: 11. May. 2012 TECHNICAL GUIDE & PARTS CATALGUE Cal. ANALGUE QUARTZ [SPECIFICATIN] Item PARTS CATALGUE / TECHNICAL GUIDE Cal. Cal. No. VK61 VK64 Movement Movement size utside diameter Casing
More informationInstallation Instructions for AEM Serial Gauge
Installation Instructions for 30-4300 AEM Serial Gauge WARNING: This installation is not for the electrically or mechanically challenged! Use this gauge with EXTREME caution! If you are! uncomfortable
More informationC7 RAPIDE CHRONOMETER LIMITED EDITION
C7 RAPIDE CHRONOMETER LIMITED EDITION O W N E R S H A N D B O O K INTRODUCTION Time on your side... Your Christopher Ward watch has been designed and engineered by highly talented craftspeople to ensure
More informationBulb Renewal TOP ACCESS COVER
TOP ACCESS COVER To gain access to the headlight units, the top cover must be removed. Unscrew and remove the six fasteners (A). Remove the top cover. After changing the defective bulb, refit the cover,
More informationSpecific information for calibre 3603
Fig. 1.0 1.0 Assembling of date indication 1. Stem in position 3 : Turn anti-clockwise the driving wheel for date unlocking yoke (reference 33029) until the finger of this wheel is aligned with the pin,
More informationCal. VS17A SOLAR SERIES 5 1/ mm. 2.79mm. Approx. 6 months. Watch Movement Specification and Drawing. Movement Size.
Watch Movement Specification and Drawing SOLAR SERIES Cal. VS17A Movement Size 5 1/2 Casing Diameter 11.8 15.15 mm Height 2.79mm Running Time Approx. 6 months Date: 31/Aug/'17 Cal. VS17A Items Rev. Page
More informationReplacing Your 2nd Generation Battery Pack
Replacing Your 2nd Generation Battery Pack Video tutorial: https://www.youtube.com/watch?v=xvcfwpo8rok Tools needed: 4mm hex tool. If you do not have a hex wrench, please email us at recall@boostedboards.com
More informationILT - Series. Troubleshooting: ILT Twinfold Dual Cylinder Folding Unit
- Troubleshooting: Twinfold Dual Cylinder Folding Unit Table of content: Page 1) Gate overview...2 2) Gate does not lower down.3 3) Gate is not lifting up....4 4) Electrical schematic 5 5) Hydraulic schematic...6
More informationPARTS LIST / TECHNICAL GUIDE
[SPECIFICATIONS] PARTS LIST / TECHNICAL GUIDE Automatic Item Cal. No. 4R35B/4R36A The figures below are Cal. 4R36A. 3 hands (hour, minute and second hands) Day and Date indication Movement size Diameter
More informationMETAL MOVEMENT MADE IN JAPAN
2018-2019 METAL MOVEMENT MADE IN JAPAN Cal. 2035 2035 the representative movement of MIYOTA. After the 2035 has appeared to the market, a lot of brands is using regularly all over the world. JAPAN MOVEMENT
More informationRemoving and installing toothed belt
Page 1 of 10 Special tools and workshop equipment required Diesel injection pump locking pin -3359- (2x) Pin wrench -T10020- Crankshaft stop -T10050- for engines with circular crankshaft sprocket Locking
More informationD25RE2 D25RE2 Maintenance
Scan the QR code to watch our D25RE2 - Service video. 800-523-8499 D25RE2 D25RE2 Maintenance Service Service Kit Includes: Before we start make sure the injector is clicking. If not, be sure to watch the
More informationTitle: CHA Flash Source
Fabrication Laboratory Revision: D Rev Date: 01/17/2011 Approved by: Process Engineer / / / / Equipment Engineer 1 SCOPE The purpose of this document is to detail the use of the CHA Flash Source. All users
More informationMAINTENANCE PROCEDURE FOR MK18/MK16
MAINTENANCE PROCEDURE FOR MK18/MK16 MK16/MK18-1/1- MAINTENANCE PROCEDURE FOR MK 16 / 18 1 ST STAGES WARNING: this maintenance procedure is only for appointed Scubapro technicians that followed a complete
More informationEstablished in 1977 KJ09138BK / KJ09137BK UP JK 3/4 & 1 3/4 LIFT KIT 3/4 KIT 1 3/4 KIT. Like Us Share Us Watch Us Follow Us
Established in 1977 KJ09138BK / KJ09137BK 2007 - UP JK 3/4 & 1 3/4 LIFT KIT 3/4 KIT OR 1 3/4 KIT Like Us Share Us Watch Us Follow Us 12 www.daystarweb.com Tech Support Contact Info Tech@DaystarWeb.com
More informationSERIES 2000 GAS SAFETY SHUT OFF VALVE
APPLICATION 2 Series 00 Solenoid Valves are Safety Shut-off or Control Valves for use on gases in gas families 1, 2 and and are also suitable for use with air within the valves pressure range - see specification.
More informationWireless Tire Pressure and Temperature Monitoring System Instruction Manual Model #: TM Cap Sensors
Wireless Tire Pressure and Temperature Monitoring System Instruction Manual Model #: TM-510 510 Cap Sensors Thank you for purchasing the TST Tire Pressure Monitoring System. With minimal care, your new
More informationTX-1 Digital Proportional R/C
P.O Box 578 Casino, NSW, 2470 Australia Phone: International ++614 2902 9083 Australia (04) 2902 9083 Website: http://rcs-rc.com E mail: info@rcs-rc.com TX-1 Digital Proportional R/C TABLE OF CONTENTS
More informationKJ09138BK / KJ09137BK UP JK 3/4 & 1 3/4 LIFT KIT
Introduction KJ09138BK / KJ09137BK 2007 - UP JK 3/4 & 1 3/4 LIFT KIT 3/4 KIT OR 1 3/4 KIT is your number one source for Made In The USA quality, Comfort Ride leveling kits. Now backed with our exclusive
More informationHave you ever had this experience?
1 [about batteries] Have you ever had this experience? Oh!? The second hand is moving at two-second intervals. This means the battery life will be soon over? I did not recognize that my quartz watch had
More informationRETAIL REPAIR PRICE LIST
MAJOR REPAIR PRICES Major repair charges cover movement, service/repair or replacement including all parts* required, seals, battery and pressure test where applicable. *Glass, dial, bezel, case, band
More informationTECHNICAL GUIDE PARTS CATALOGUE. Cal.NE20 AUTOMATIC MECHANICAL. SII Products
TECHNICAL GUIDE & PARTS CATALOGUE AUTOMATIC MECHANICAL [SPECIFICATION] Item PARTS CATALOGUE / TECHNICAL GUIDE Version-01 NE20 Cal. No. Movement Movement size Time indication Basic function Frequency Accuracy
More informationInstallation, Maintenance and Operation Manual
Installation, Maintenance and Operation Manual Radius, LLC 4922 Technical Drive Milford, MI 48381 Contents 1. Before operating actuator.. 3 2. About EW actuators 4 1) Internal & external component 2) Internal
More informationKC09101BK FRONT 2 COIL SPRING SPACER KIT DODGE RAM 4WD RAM MEGA CAB 4WD 1500
KC09101BK FRONT 2 COIL SPRING SPACER KIT 1994-2001 DODGE RAM 4WD 1500 2005-2012 RAM MEGA CAB 4WD 1500 www.daystarweb.com Tech Support Contact Info Tech@DaystarWeb.com Phone: 623.907.0081 Fax: 623.907.0088
More informationNEW ZEALAND RETAIL REPAIR PRICE LIST
Table of Contents BATTERY SUPPLY & FITTING... 1 WATER RESISTANT PRESSURE TEST... 1 MINOR SERVICE... 1 CASE REPAIRS... 2 GLASSES... 2 HANDS... 3 DIALS... 3 BAND REPAIRS... 3 ADDITIONAL LINKS FOR RETAIL
More informationHYDROTEK INTERNATIONAL, INC Forsyth Commerce Rd., Ste. 124, Orlando, FL Phone (800) / Fax (866)
HYDROTEK INTERNATIONAL, INC. 5055 Forsyth Commerce Rd., Ste. 124, Orlando, FL 32807 Phone (800)922-9883 / Fax (866)670-5580 www.hydrotekintl.com OPERATION & MAINTENANCE MANUAL HYDROTEK MODEL #H-4000C FAUCET
More informationRadius, LLC Electric quarter turn actuator EW series Installation, Maintenance and Operating Manual
Radius, LLC Electric quarter turn actuator EW series Installation, Maintenance and Operating Manual Models EW-880, 1400, 2100, 3100, 4400, 7000, 9700, 13000, 17000, 26500 EW-IMO-04 Radius, LLC 4922 Technical
More informationMAJOR REPAIR PRICES. Analogue $ Divers Analogue $ Analogue World Timer (2 movements) $ Digital $ Duo $188.
MAJOR REPAIR PRICES Major repair charges cover movement, service/repair or replacement including all parts* required, seals, battery and water resistant pressure test where applicable. (*Glass, dial, bezel,
More informationINSTALLATION INSTRUCTIONS FOR
For high temperature wells STEP 1 Clean Stuffing Box F8 & F8H Tools required: ratchet with 9/16 socket, 9/16 wrench, 3/32 Allen wrench, wire brush, cleaner/solvent, rags. DUAL PACK Dual Pack Stuffing Box
More informationPARTS CATALOGUE / TECHNICAL GUIDE Cal.NE57A Version-01 NE57A [SPECIFICATION] Cal. No. Item. Movement. Outside diameter. Movement size.
[SPECIFICATION] Item PARTS CATALOGUE / TECHNICAL GUIDE NE57A Cal. No. Movement Movement size Time indication Basic function Frequency Accuracy Duration time Outside diameter Static accuracy Winding the
More information2. Uncasing. 5. Remove the clamp screws (casing ring / middle and movement / casing ring) and the clamps. 6. Remove the casing ring.
Calibre 360 1. Presentation 2. Uncasing 3. Chronograph movement (module) / M2 replacement procedure 4. Overhauling the base movement 5. Assembling the base movement with the chronograph movement 6. Chronograph
More informationTIME-10 Process Control Stopwatch
TIME-10 Process Control Stopwatch Users Manual Mode d emploi Bedienungshandbuch Manual d Uso Manual de uso TIME-10 Process Control Stopwatch Users Manual English July 2009, Rev.1 2009 Amprobe Test Tools.
More informationILQ TROUBLESHOOTING GUIDE
TROUBLESHOOTING GUIDE Rev. 1.1, Date 1-15-2009 1 Series (until June 2008) Troubleshooting: with rectangle circuit board on driver side Table of content: Page 1) Gate overview and connector setup...2 2)
More informationError code explanation Diagnostics...2 Error Code Chart...3 Tests Wiring diagram...6
Washer Tech Data Sheet This information is intended for Qualified Technicians Only. CAUTION: DISCONNECT ELECTRICAL CURRENT BEFORE SERVICING Please Return This Sheet to its Envelope in the Product for Future
More informationRETAIL REPAIR PRICE LIST
is undertaken. Table of Contents BATTERY SUPPLY & FITTING... 2 WATER RESISTANT PRESSURE TEST... 2 MINOR SERVICE... 2 CASE REPAIR:... 3 GLASSES... 3 HANDS... 4 DIALS... 4 BAND REPAIRS... 4 ADDITIONAL LINKS
More informationPARTS LIST / TECHNICAL GUIDE Automatic Cal.4R71A
[SPECIFICATION] Item PARTS LIST / TECHNICAL GUIDE Automatic Cal.4R71A Cal. No. 4R71A 3 Hands (Hour, Minute and Second hands) Movement Size Diameter Outside : φ27.4 mm Casing : φ27.0 mm Height : 5.32 mm
More informationLES NOUVEAUTÉS OCTOBRE 2017
LES NOUVEAUTÉS OCTOBRE 2017 VINTAGE STYLE CALENDAR CALENDAR REF. WLAC03BUMM CALENDAR REF. WLAC03BOMM! VINTAGE STYLE CALENDAR REF. WLAC03BUMM ACIER AVEC CADRAN BLEU ET BRACELET MAILLE MILANAISE 159 ACIER
More informationCS-2004 WDC. Remote Control Alarm System with CoolGlow & SecurWatch INSTALLATION & OPERATING INSTRUCTIONS
CS-2004 WDC Remote Control Alarm System with CoolGlow & SecurWatch INSTALLATION & OPERATING INSTRUCTIONS INTRODUCTION: CONGRATULATIONS on your choice of a Remote Alarm System by Crimestopper Security Products
More informationDer PARAVAN KALI V2 Cassette lift Owner`s Manual. User manual/ PARAVAN KALI V3.3 cassette lift (Software-Update 2.0)
Der PARAVAN KALI V2 Cassette lift Owner`s Manual User manual/ PARAVAN KALI V3.3 cassette lift (Software-Update 2.0) User manual for the PARAVAN KALI V2 cassette lift 1st Introduction The Paravan cassette
More informationCustomer Name. Instruction for Operation. Single Head Sleever
Customer Name Instruction for Operation Single Head Sleever Content Reload of Sleeve Roll (page 3~5) Sleeve Feeding (Page 6~7) Sleeve Sensor Positioning (Page 8~10) Holder Installation (Page 11~13) Splice
More informationCaution! Caution! Air/CO2 and Electric Shift Devices
Caution! Caution! Air/CO and Electric Shift Devices You must set rpm in the CHEETAH E-SHIFT Controller before starting vehicle! Failure to do this could cause injury and or property damage! Read Instructions
More informationWorking Model 2D Tutorial 2
Working Model 2D: Tutorial 2 Example 11-10: A wheel with Diameter of 1.2m, mounted in a vertical plane, accelerates uniformly from rest at 3 rad/s 2 for five seconds, and then maintains uniform velocity
More informationAE Installation Operation & Maintenance Instructions
AE-1400 Installation Operation & Maintenance Instructions IMPORTANT Please read the installation operation and maintenance instruction prior to using any Jomar Valve component. Failure to follow the instructions
More informationPARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE [SPECIFICATIONS] Item Movement Cal. No. Cal. 7T84A 7T84A (x 1.0) Movement size Time indication Driving system Outside diameter Casing diameter Height Additional mechanism
More information2005 Chrysler 300 C ENGINE Mechanical - 3.5L - Service Information & Magnum
1. Install camshaft sprockets onto the camshafts. Install NEW sprocket attaching bolts into place. The 255 mm (10 in.) bolt is to be installed in the left camshaft and the 213 mm (8 3/8 in.) bolt is to
More informationSETTING THE TIME CRANKCASE THREE-HAND
02 CRANKCASE THREE-HAND INSTRUCTIONS MANUAL CRANKCASE THREE-HAND Engineered for a life with momentum, this Swiss Made timepiece lets you gauge the moments that refuse to stand still. Impact forged stainless
More informationTHE OMEGA 1957 LIMITED EDITION
THE OMEGA 1957 LIMITED EDITION 6. Over the course of one famous year, OMEGA released three professional timepieces that would all go on to become absolute classics: The Seamaster 300, the Railmaster and
More informationPARTS LIST / TECHNICAL GUIDE
PARTS LIST / TECHNICAL GUIDE Analogue Solar [SPECIFICATIONS] Item Cal. No. V114A 2 hands (hour, minute hands) Diameter Outside: Ø 15.5 mm x 11.8 mm Casing: Ø 15.15 mm x 11.80 mm Height: Ø 2.0 mm Interval
More information1200 Southeast Ave Tallmadge, Ohio to 2014 Mustang (V6 & V8) Summit Racing Roll Stop Install Instructions.
1200 Southeast Ave Tallmadge, Ohio 44278 2010 to 2014 Mustang (V6 & V8) Summit Racing Roll Stop Install Instructions Part # SUM-760005 Thank you for considering the Summit Racing Roll Stop. Summit Racing
More informationAutoShear Purpose built to quickly remove valuable catalytic converters
AutoShear Purpose built to quickly remove valuable catalytic converters Return on investment The simple design promises a long and productive working life, which will pay for itself many times over. Increases
More informationPARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE [SPECIFICATIONS] Item Movement Cal. No. Cal. 5T82A 5T82A (x 1.0) Movement size Time indication Driving system Outside diameter Casing diameter Height (Movement intervals)
More informationSetting Instructions for Movement Caliber B230 Contents
Setting Instructions for Movement Caliber B230 Contents 1. Outline 2. Specifications 3. About Solar Powered Watches 4. Setting the Time and Calendar 5. Functions of the Solar Power Watch 6. Time Required
More informationService Manual Air Tech Second Stage
Service Manual Air Tech Second Stage Copyright 2002, Cressi-sub Revised 3/2002 2 Air Tech Second Stage Service Manual Contents BEFORE STARTING... 3 DISASSEMBLY... 3 PARTS CLEANING AND LUBRICATION... 9
More informationKG09100BK / KG09101BK GM WD.
KG09100BK / KG09101BK GM. 1988-2006 2 WD. KG09101BK KG09100BK www.daystarweb.com Tech Support Contact Info Tech@DaystarWeb.com Phone: 623.907.0081 Fax: 623.907.0088 841 South 71 st Avenue Phoenix, AZ 85043
More informationInstructions for: DIESEL ENGINE SETTING/LOCKING KIT - VOLKSWAGEN 2.5TDi - PUMP DüSE - GEAR DRIVE MODEL No: VS5035. Applications: Kit contents
Instructions for: DIESEL ENGINE SETTING/LOCKING KIT - VOLKSWAGEN 2.5TDi - PUMP DüSE - GEAR DRIVE MODEL No: VS5035 Thank you for purchasing a Sealey product. Manufactured to a high standard this product
More information200 HYDRO-TOWER 200. Ordering Information. Wall-hung Toilet That Matches The Tank. Function Explanation
200 HYDRO-TOWER 200 IN-WALL TANK INSTALLATION INSTRUCTIONS K-6287T, K-6288T Read installation guide in illustration and word file carefully, and install the tank according to instructions in the guide
More informationJACOB & CO. EPIC X CHRONO PRESS RELEASE
JACOB & CO. EPIC X CHRONO PRESS RELEASE EPIC X CHRONO Launched at Baselworld 2013, the Epic X line from Jacob & Co. became synonymous with a sportive and active lifestyle. Now in 2017, it has been integrated
More informationFLOWSERVE CORPORATION NOBLE ALLOY VALVE PISTON CHECK VALVE REPAIR INSTRUCTIONS
FLOWSERVE CORPORATION NOBLE ALLOY VALVE PISTON CHECK VALVE REPAIR INSTRUCTIONS Cookeville Valve Operation 1978 Foreman Drive Cookeville, TN 38541 PH: 800-251-6761 931-432-4021 FAX: 931-432-5518 PISTON
More informationÖhlins Front Fork Road & Track FG 43. Owner s Manual
Öhlins Front Fork Road & Track FG 43 Owner s Manual Öhlins Headquarters Upplands Väsby, Sweden Öhlins Racing AB - The Story It was the 1970 s, a young man named Kenth Öhlin spent most of his spare time
More informationBASYS Infrared Sensor Activated
EFX-1XX SERIES EFX-2XX SERIES 6C 6B 6A 5 3A 4 2 8 16 9 11 17 1 3B 7 PARTS LIST BASYS FAUCETS Item No. Code No. Part No. Description 1. Mid Mount Faucet Assembly Mid Mount Faucet Assembly with Mixer High
More information2. Remove the four bolts and lift the panel off. The white cap of filter module is underneath. It looks like this (seen removed from the tank).
This kit will fix the common non-start condition due to filter module separation. Both fuel pump and fuel filter are located in the fuel tank. The filter module is under the LHS (nearside) rear seat. The
More informationTECHNICAL INSTRUCTIONS FOR SAFETY RECALL ALE VALVE SPRING AND LASH ADJUSTER REPLACEMENT GS 350: IS 350:
TECHNICAL INSTRUCTIONS FOR SAFETY RECALL ALE VALVE SPRING AND LASH ADJUSTER REPLACEMENT GS 350: 2007 2008 IS 350: 2006 2008 I. OPERATION FLOWCHART Verify Vehicle Eligibility 1. Check the VIN range. 2.
More informationELECTRONIC CONTROL ACTUATOR
ELECTRONIC CONTROL ACTUATOR Nucom Series LINEAR TYPE Nucom L100 OPERATION MANUAL Koei Industry Co., Ltd. FOR YOUR SAFETY In order for better and safety use of the product for a long period, please observe
More information3KVA DUAL VOLTAGE GENERATOR MODEL NO: PG3800DV
3KVA DUAL VOLTAGE GENERATOR MODEL NO: PG3800DV PART NO: 8857815 OPERATION & MAINTENANCE INSTRUCTIONS LS1016 INTRODUCTION Thank you for purchasing this CLARKE 3KVA Dual Voltage Generator. Before attempting
More informationEngine Dismantle and Assemble ( )
Engine Dismantle and Assemble ( 34 8) Special Tools 5 053 Slide hammer 47 Vibration damper remover 47 5053 00 Splined head socket, cylinder head bolts 87 Mounting stand with geared drive 00 059C Installer
More informationC25. Parts supplied: 1: Flush Valve installation
urlington 440mm slimline close coupled cistern tank with back and bottom entry water supply with button flush C5 Parts supplied: Please read these instructions carefully to avoid damage to the valves,
More information18W Round LED Slimline Emergency Light
18W Round LED Slimline Emergency Light Model: LEDMRQ18WHEM Installation & Operating Instructions 1 1. General Information These instructions should be read carefully and retained for further reference
More informationCalibre General information for Calibre Exploded views for calibre Specific information for calibre
Technical Guide TG-19-C-024-E C Produced by : pelrom Date: 20.09.2010 3 Modifications: see last page CALIBRE 3220 Version A 131/4 Ø 30 mm Height on movement Power reserve Number of jewels Frequency Lift
More informationENGLISH MANUAL. This manual can be accessed at:
MANUAL ENGLISH MANUAL Adjusting the Holster for your gun Keeping the tradition of fine design, quality, elegance, strength and durability of the previous models, Holster FSH is virtually universal, therefore
More informationMAINTENANCE MANUAL DI 16
MAINTENANCE MANUAL DI 16 0.2-1.6% Press Ctrl + L for full screen 1 STANDARD INSTALLATION Inlet Outlet Optional accessories: Pressure regulator Solenoid valves Water meter Flow restrictor 200 Mesh/ 80 micron
More informationRetro it Steering Column
Retro it Steering Column INSTALLATION INSTRUCTIONS for 1970-74 Cuda/Challenger FOR PART NUMBER S: 1620810010, 1620810020, 1620810051, 1620820010, 1620820020, 1620820051 S I NCE 1986 Instruction # 8000000005
More information