Direct solenoid and solenoid pilot operated valves
|
|
|
- Daniella Lamb
- 6 years ago
- Views:
Transcription
1 Direct solenoid and solenoid pilot operated valves Individual mounting Series Inline Oval shaped armature Encapsulated coil Push pin Manifold mounting Stacking Manifold base plug-in Manifold base plug-in with pressure regulators P Bonded balanced poppet 3 48 Return spring SERIES FEATURES Patented high force MACSOLENOID for fastest possible response times. Bonded balanced poppet for high flow, precise repeatability, and consistent operation. Balanced poppet permits versatility in function may be used as 3-way or -way normally open or normally closed and may be used for vacuum, divertor, or selector applications. Extremely high cycle rate capability. Use on lube or non-lube service. Manual overrides as standard. Various solenoid enclosures and plug-in connectors. Optional surge suppression available. Low wattage DC solenoids down to 1.8 watts. Rectified AC voltage. 93 ISO 01 ISO 0 ISO 1 ISO ISO 3 1 Consult Precautions page 37 before use, installation or service of MAC Valves..
2 Direct solenoid and solenoid pilot operated valves Function Port size Flow (Max) Individual mounting Series 3/ 1/8 0.3 C v Inline OPERATIONAL BENEFITS 1. Balanced poppet, immune to variations of pressure.. Patented solenoid develops high shifting forces. 3. Short stroke with high flow. 4. Higher forces result in lower wattages for given flow. 5. Powerful return spring. HOW TO ORDER Port size Universal valve NC only valve /8 NPTF 36A-AAA-J XXX-XXX 36A-AAB-J XXX-XXX 46 SOLENOID OPERATOR J XXX-XXX * (-G) Add "G" for ground XX Voltage X Lead wire length X Manual operator XX AA DA DB DC DD 10 VAC (5.4W) 4 VDC (5.4W) 1 VDC (5.4W) 4 VDC (.4W) 1 VDC (.4W) A 18 B 4 C 36 * Other options available, see page 317. Note : - AC voltage requires connector with rectifier. - With the MAC JAC, washdown capability is possible. Consult factory for washdown modification number. 1 Non-locking recessed Locking recessed BA GA GB GD GG Electrical connection Flying leads with diode with light with rectifier P ISO 01 ISO 0 ISO 1 ISO ISO 3 3 Consult Precautions page 37 before use, installation or service of MAC Valves..
3 100% 100% WARRANTY 18 O F P R O D U C T I O N T E S T E D 100% MONTHS TECHNICAL DATA Fluid : Pressure range : Lubrication : Filtration : Temperature range : Flow : Coil : Voltage range : Protection : Power : Compressed air, vacuum, inert gases Vacuum to 10 PSI Not required, if used select a medium aniline point lubricant (between 180 F and 10 F) 40 µ 0 F to 10 F (-18 C to +50 C) 1.8 Watt: (0.15 C v ),.4 Watt: (0.15 C v ), 5.4 Watt: (0.30 C v ) Class A wire (# AWG x 1), continuous duty -15% to +10% of nominal voltage Consult factory 5.4 W.4 W 1.8 W Option : BSPP threads DIMENSIONS Dimensions shown are metric (mm) Ø Consult Precautions page 37 before use, installation or service of MAC Valves..
4 Direct solenoid and solenoid pilot operated valves Function Port size Flow (Max) Individual mounting Series 3/ 1/8" # C v Stacking OPERATIONAL BENEFITS 1. Balanced poppet, immune to variations of pressure.. Patented solenoid develops high shifting forces. 3. Short stroke with high flow. 4. Higher forces result in lower wattages for given flow. 5. Powerful return spring. HOW TO ORDER Port size 1/8 NPTF # 10-3 SOLENOID OPERATOR NC only stacking CYL INEXH 36A-SAB-J XXX-XXX 36A-SBB-J XXX-XXX NC stacking Universal poppet CYL INEXH 36A-SAC-J XXX-XXX 36A-SBC-J XXX-XXX NO stacking Universal poppet CYL IN EXH 36A-SAD-J XXX-XXX 36A-SBD-J XXX-XXX J XXX-XXX * (-G) Add "G" for ground XX Voltage X Lead wire length X Manual operator XX AA DA DB DC DD 10 VAC (5.4W) 4 VDC (5.4W) 1 VDC (5.4W) 4 VDC (.4W) 1 VDC (.4W) A 18 B 4 C 36 * Other options available, see page 317. Note : - AC voltage requires connector with rectifier. - With the MAC JAC, washdown capability is possible. Consult factory for washdown modification number. End plate kit required (port size 1/4") : M BODY TYPE OPTIONS 36A-SAB-JXXX-XXX S Stacking body T Stacking body with bottom inlet 1 Non-locking recessed Locking recessed BA GA GB GD GG Electrical connection Flying leads with diode with light with rectifier P ISO 01 ISO 0 ISO 1 ISO ISO 3 5 Consult Precautions page 37 before use, installation or service of MAC Valves..
5 100% 100% WARRANTY 18 O F P R O D U C T I O N T E S T E D 100% MONTHS TECHNICAL DATA Fluid : Pressure range : Lubrication : Filtration : Temperature range : Flow : Coil : Voltage range : Protection : Power : Compressed air, vacuum, inert gases Vacuum to 10 PSI Not required, if used select a medium aniline point lubricant (between 180 F and 10 F) 40 µ 0 F to 10 F (-18 C to +50 C) 1.8 Watt: (0.15 C v ),.4 Watt: (0.15 C v ), 5.4 Watt: (0.30 C v ) Class A wire (# AWG x 1), continuous duty -15% to +10% of nominal voltage Consult factory 5.4 W.4 W 1.8 W Option : Spare parts : BSPP threads Inlet & exhaust isolator plate : N Inlet isolator : N-3600 Exhaust isolator : N Tie rod (x) : DIMENSIONS Dimensions shown are metric (mm) Note: Isolator adds.5 mm to length of stack /4" COMMONS Consult Precautions page 37 before use, installation or service of MAC Valves..
6 Direct solenoid and solenoid pilot operated valves Function Port size Flow (Max) Individual mounting Series 3/ 1/8" - 5/3 Pressed-in 0.3 C v tube receptacle Manifold base plug-in OPERATIONAL BENEFITS 1. Balanced poppet, immune to variations of pressure.. Patented solenoid develops high shifting forces. 3. Short stroke with high flow. 4. Higher forces result in lower wattages for given flow. 5. Powerful return spring. HOW TO ORDER Port size Valve less base 1/8 NPTF 5/3 tube receptacle SOLENOID OPERATOR Universal Valve Normally Closed 36A-J00-00-J XXP-XXX 36A-JSA-AE-J XXP-XXX 36A-JSF-AE-J XXP-XXX J XX P-XXX * Universal Valve Normally Open 36A-K00-00-J XXP-XXX 36A-KSA-AF-J XXP-XXX 36A-KSF-AF-J XXP-XXX Normally Closed Only 36A-L00-00-J XXP-XXX 36A-LSA-AE-J XXP-XXX 36A-LSF-AE-J XXP-XXX (-G) Add G for ground P XX Voltage X Manual operator XX AA DA DB DC DD 10 VAC (5.4W) 4 VDC (5.4W) 1 VDC (5.4W) 4 VDC (.4W) 1 VDC (.4W) * Other options available, see page 317. Note : AC voltage requires connector with rectifier. 1 Non-locking recessed Locking recessed Example : Manifold base only : 36A-0SA-AE (Normally closed manifold base). End plate kit required (port size 1/4") : M FA FB FG Electrical connection Base plug-in Base plug-in with diode Base plug-in with rectifier ISO 01 ISO 0 ISO 1 ISO ISO 3 7 Consult Precautions page 37 before use, installation or service of MAC Valves..
7 100% 100% WARRANTY 18 O F P R O D U C T I O N T E S T E D 100% MONTHS TECHNICAL DATA Fluid : Pressure range : Lubrication : Filtration : Temperature range : Flow : Coil : Voltage range : Protection : Power : Compressed air, vacuum, inert gases Vacuum to 10 PSI Not required, if used select a medium aniline point lubricant (between 180 F and 10 F) 40 µ 0 F to 10 F (-18 C to +50 C) 1.8W : (0.0 C v ).4W : (0.0 C v ) 5.4W : (0.30 C v ) Class A continuous duty, # AWG x 1 base leads -15% to +10% of nominal voltage Consult Factory 5.4 W.4 W 1.8 W Option : Spare parts : BSPP threads Inlet isolator : 8501 Exhaust isolator : 850 Valve cover plate : M-4600 Tie rod (x) : DIMENSIONS Dimensions shown are metric (mm) Note: For Normally closed manifold the A port is plugged. For Normally open manifold the B port is plugged Ø 4.3 1/4" COMMONS /4"-14 NPSM 8 Consult Precautions page 37 before use, installation or service of MAC Valves..
8 Direct solenoid and solenoid pilot operated valves Function Port size Flow (Max) Individual mounting Series 3/ 1/8" - 5/3 Pressed-in 0.3 C v tube receptacle OPERATIONAL BENEFITS 1. Balanced poppet, immune to variations of pressure.. Patented solenoid develops high shifting forces. 3. Short stroke with high flow. 4. Higher forces result in lower wattages for given flow. 5. Powerful return spring. HOW TO ORDER Port size Valve less base 1/8 NPTF 5/3 tube receptacle SOLENOID OPERATOR Universal Valve Normally Closed 36A-J00-00-J XXP-XXX 36A-JSA-AG-J XXP-XXX 36A-JSF-AG-J XXP-XXX J XX P-XXX * Universal Valve Normally Open 36A-K00-00-J XXP-XXX 36A-KSA-AH-J XXP-XXX 36A-KSF-AH-J XXP-XXX Manifold base plug-in with pressure regulators Normally Closed Only 36A-L00-00-J XXP-XXX 36A-LSA-AG-J XXP-XXX 36A-LSF-AG-J XXP-XXX (-G) Add G for ground P XX Voltage X Manual operator XX AA DA DB DC DD 10 VAC (5.4W) 4 VDC (5.4W) 1 VDC (5.4W) 4 VDC (.4W) 1 VDC (.4W) * Other options available, see page 317. Note : AC voltage requires connector with rectifier. 1 Non-locking recessed Locking recessed FA FB FG Electrical connection Base plug-in Base plug-in with diode Base plug-in with rectifier OPTIONS 36A-JSA-AG-JXX P-XXX G NC manifold & regulator with slotted stem adjustment 36A-KSA-AH-JXX P-XXX H NO manifold & regulator with slotted stem adjustment S NC manifold & regulator with locking slotted stem adjustment T NO manifold & regulator with locking slotted stem adjustment J NC manifold & regulator with knob adjustment K NO manifold & regulator with knob adjustment Note : All manifold bases are only available with a bottom cylinder port. Example : Manifold base only : 36A-0SA-AJ (Normally closed manifold base & regulator with knob). End plate kit required (port size 1/4") : M ISO 01 ISO 0 ISO 1 ISO ISO 3 9 Consult Precautions page 37 before use, installation or service of MAC Valves..
9 100% 100% WARRANTY 18 O F P R O D U C T I O N T E S T E D 100% MONTHS TECHNICAL DATA Fluid : Pressure range : Lubrication : Filtration : Temperature range : Flow : Coil : Voltage range : Protection : Power : Compressed air, vacuum, inert gases Vacuum to 10 PSI Not required, if used select a medium aniline point lubricant (between 180 F and 10 F) 40 µ 0 F to 10 F (-18 C to +50 C) 1.8W : (0.0 C v ).4W : (0.0 C v ) 5.4W : (0.30 C v ) Class A continuous duty, # AWG x 1 base leads -15% to +10% of nominal voltage Consult Factory 5.4 W.4 W 1.8 W Option : Spare parts : BSPP threads Inlet isolator : 8501 Exhaust isolator : 850 Valve cover plate : M-4600 Tie rod (x) : DIMENSIONS Dimensions shown are metric (mm) Note: For Normally closed manifold the A port is plugged. For Normally open manifold the B port is plugged /8" GAGE PORT 69. Ø 4.3 1/4" COMMONS /4"-14 NPSM 30 Consult Precautions page 37 before use, installation or service of MAC Valves..
10 OPTIONS Codification table for voltages / Manual operators / Electrical connections VALVE CODE J XX X-X XX OPTIONS AVAILABLE FOR - Solenoid valves 36, 46, ISO 01 and ISO 0 Series 317 Consult Precautions page 37 before use, installation or service of MAC Valves..
11 OPTIONS 1. VOLTAGE VOLTAGE AA 10VAC (5.4W) AC 4VAC (5.4W) DE 4VDC (1.8W) DF 1VDC (1.8W) DJ 4VDC (1.3W) DL 1VDC (1.3W) DN 1VDC (0.5W)* DR 1VDC (1.0W)* DS 4VDC (0.5W)* DU 4VDC (1.0W)* * Not available on 36 series universal valve A B C D E F P O. WIRE LENGTH WIRE LENGTH 18" coil leads 4" coil leads 36" coil leads 48" coil leads 7" coil leads 96" coil leads Base plug-in No leads (use with J, K & L type connectors) 3. MANUAL OPERATOR MANUAL OPERATOR 0 No operator 1 Non-locking recessed Locking recessed 3 Non-locking extended 4 Locking extended BA GA GB GC GD GE GF GG GH GJ GK GL GM GN GP GR GS *JA *JC *JE *JF *JG *JH *JK 4. ELECTRICAL CONNECTION CONNECTORS FOR NON PLUG-IN VALVES ELECTRICAL CONNECTION Flying leads with diode with MOV with light with diode and light with MOV and light with rectifier with rectifier and light Male only with diode Male only with MOV Male only with light Male only with diode and light Male only with MOV and light Male only with rectifier Male only with rectifier and light Male only Square Connector Square Connector with light Square Connector with diode Square Connector with MOV Square Connector with diode/light Square Connector with MOV/light Square Connector with Rectifier *JL Square Connector with Rectifier with light *JJ Square Connector Male only (Plain) *JB Rectangular Connector *JD Rectangular Connector with light *JN Rectangular Connector with diode *JP Rectangular Connector with MOV *JR Rectangular Connector with diode/light *JS Rectangular Connector with MOV/light *JT Rectangular Connector with Rectifier *JU Rectangular Connector with Rectifier with light *JM Rectangular Connector Male only (Plain) * Not available on manifold or stacking valves KA KB KC KD KE KF KG KH KJ KK KL KM KN KP KR KS LA LB LC LD LE LF LG LH LJ LK LL LM LN LP LR LS FA FB FC FD FE FF FG FH CONNECTORS FOR NON PLUG-IN VALVES MINI SQUARE PLUG-IN CONNECTORS 9.4 MM SPACING BETWEEN PINS Mini plug-in Mini plug-in with diode Mini plug-in with MOV Mini plug-in with light Mini plug-in with diode and light Mini plug-in with MOV and light Mini plug-in with rectifier Mini plug-in with rectifier and light Mini plug-in Male only Mini plug-in with diode - Male only Mini plug-in with MOV - Male only Mini plug-in with light - Male only Mini plug-in with diode and light Male only Mini plug-in with MOV and light Male only Mini plug-in with rectifier Male only Mini plug-in with rectifier and light Male only CONNECTORS FOR NON PLUG-IN VALVES MINI SQUARE PLUG-IN CONNECTORS 8.0 MM SPACING BETWEEN PINS ISO SPECIFICATION 1517 Mini plug-in Mini plug-in with diode Mini plug-in with MOV Mini plug-in with light Mini plug-in with diode and light Mini plug-in with MOV and light Mini plug-in with rectifier Mini plug-in with rectifier and light Mini plug-in Male only Mini plug-in with diode - Male only Mini plug-in with MOV - Male only Mini plug-in with light - Male only Mini plug-in with diode and light Male only Mini plug-in with MOV and light Male only Mini plug-in with rectifier Male only Mini plug-in with rectifier and light Male only CONNECTORS FOR PLUG-IN VALVES Base plug-in Base plug-in with diode Base plug-in with MOV Base plug-in with light Base plug-in with diode and light Base plug-in with MOV and light Base plug-in with rectifier Base plug-in with rectifier and light 318 Consult Precautions page 37 before use, installation or service of MAC Valves..
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Individual mounting Series Inline Manual operator Solenoid 4-way pilot with balanced poppet Air return 33 34 36 3 37 38 5 67 69 44 46 4 47 48P SERIES
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Individual mounting Series Inline Oval shaped armature Encapsulated coil Push pin onded balanced poppet Return spring Manifold mounting Stacking plug-in
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves SIZE 26 mm Individual mounting Valve only No base non plug-in Conform to ISO 15407/1 Manifold mounting Valve only No base non plug-in Conform to ISO 15407/1
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves 8mm valve Series 33 Function Port size Flow (Max) Individual mounting Series 3/ NC M3 0.08 C v Inline OPERATIONAL BENEFITS 1. 8mm valve direct solenoid
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Individual mounting Series Inline Sub-base non plug-in 4 6 Air return Manual operator Solenoid 4-way pilot with balanced poppet Bonded spool 2 7 8 2 67
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Individual mounting Series Inline Manual operator Solenoid 4-way pilot with balanced poppet Inlet (1) Exhaust (3) Cylinder () 33 34 36 3 37 38 5 67 69
Introduction Section 1 Section 2 Section 3 Section 4 Section 5 Section 6 Section 7
NEW Technology Page Introduction Section 1 Section Section Section 4 Section 5 Section 6 Section 7 Direct solenoid and solenoid pilot operated valves 9 Remote air valves 197 Bases according to ISO 5599
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Individual mounting Series inline Manifold mounting 5 stacking sub-base non plug-in sub-base with pressure regulators 100 200 1 55 56 57 58 59 Manual
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Individual mounting Series inline inline hazardous location Manifold mounting 35 sub-base non plug-in sub-base with pressure regulators sub-base hazardous
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Manual operator Solenoid Individual mounting Sub-base non Sub-base Manifold mounting Manifold base Sub-base/ manifold base non with latching solenoid
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Series ISO Individual mounting Valve only No base non plug-in Conform to ISO 99/ Valve only No base plug-in Conform to ISO 99/ Manifold mounting Valve
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Individual mounting Series inline sub-base non plug-in Manifold mounting 35 stacking sub-base non plug-in sub-base with pressure regulators sub-base with
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Individual mounting Series Inline Sub-base non plug-in Sub-base plug-in Manifold mounting Sub-base non plug-in Sub-base plug-in 33 34 36 32 onded spool
GM - G XXX-XXX. Direct solenoid and solenoid pilot operated valves. Function Port size Flow [Max] Individual mounting. Series 77
![GM - G XXX-XXX. Direct solenoid and solenoid pilot operated valves. Function Port size Flow [Max] Individual mounting. Series 77](/thumbs/90/103458152.jpg "GM - G XXX-XXX. Direct solenoid and solenoid pilot operated valves. Function Port size Flow [Max] Individual mounting. Series 77")
Direct solenoid and solenoid pilot operated valves Series 77 Function Flow [Max] Individual mounting 3/2 NC, 2/2 NC 1/8-1/4 1.0 Cv Inline OPERATIONAL BENEFITS 1. The 4-way pilot develops maximum shifting
Specifications 54 Series Valve
Specifications 54 Series Valve Fluids: Compressed Air or Inert Gases Lubrication: Not required. If used, select a medium aniline point lubricant (between 180ºF and 210ºF) Safe Operating Temperature Range:
33 SERIES 34 SERIES 34B/C - X X X - G XX X - X XX A - X X X - R XX X - X XX
Patents and Patents Pending SMALL 3 WAY SOLENOID, AIR AND MECHANICALLY OPERATED VALVES MANUAL OPERATOR COIL SOLENOID STROKE (GAP) PUSH PIN POLE PIECE POLE PIECE SPRING The 34 series is a direct operated
32, CONTENTS SMALL LARGE
SMALL 11,2 LARGE 3-WAY VALVES - 2 to 32 Introduction 02-03 33 Series 04 34 Series 05-06 35 Series 07-08 36 Series 09-12 37 Series 13-14 100 Series 15 200 Series 16 1100 Series 17 Introduction 18-19 52
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Individual mounting Series non plug-in plug-in Manifold mounting 35 non plug-in plug-in 100 Pilot air accumulator ir/spring return Integral ground wire
MAC VALVES, INC. Rev. T
REVISION LEVEL DATE RELEASED CHANGE DESCRIPTION ECN NUMBER P.E. APPROVAL P.D APPROVAL A 5-11-95 ENGINEERING RELEASE 12727 EPJ B 1-15-96 ADDED 35 SERIES 13228 EPJ ADDED MOD 2938 TO 6500 SERIES, MODS 2910
SITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices. Orifice plate with annular chambers. 4/358 Siemens FI
Application Dimensional drawings Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -60 to +550 C. Design Two support rings with replaceable orifice disk
Bullet Valve (BV) Series
ullet Valve (V) Series VERY FEW PARTS LONG LIFE LIFTING SOLENOID ONE PIECE POPPET / ARMATURE ALANCED DESIGN SOLENOID ISOLATED FROM CONTAMINATED AIR UNIQUE MOUNTING D-SEAL TECHNOLOGY LONG LIFE LIFTING SOLENOID
MAC Pulse Valve PV06 Series
The MAC Pulse Valve series is designed to be a direct drop-in replacement for existing pulse technology. The MAC solution utilizes a long life, bonded-spool design, instead of the traditional diaphragm
BC. Materials. Working temperature (Seals) Sectors: Industrial, Agricultural
1 SERI ISO-A Manufactured according ISO 7241-A norm, size meets also ISO 5675 requirements. Poppet Valve or Ball closing system. BSP, NPTF, SAE/ORB threads. Others available upon request. Materials Body:
MAC Pulse Valve PV03 Series
The MAC Pulse Valve series is designed to be a direct drop-in replacement for existing pulse technology. The MAC solution utilizes a long life, bonded-spool design, instead of the traditional diaphragm
92 Series MAConnect with Sub D
9 Series MAConnect with Sub D MAXIMUM OF 0 SOLENOIDS CAN BE POWERED BY A SINGLE MULTI-PIN CONNECTOR. UP TO 40 SOLENOIDS CAN BE POWERED BY MEANS OF A SECOND MULTI-PIN CONNECTOR STATION. LEFT OR RIGHT END
42 Series MAConnect TM. 42 Series Plug-In Manifold
42 Series MAConnect TM 42 Series Plug-In Manifold Specifications 42 Series Valve Operating Data Fluids: Lubrication: Safe Operating Temperature Range: Pressure Range: Electrical: Air or Inert Gas Not Required.
External Pilot Models 5 Sgl. Sol. Plug-In to Left. Internal Pilot Models 1 Sgl. Sol. Plug-In to Left. 4 Dbl. Sol. Plug-In to Right
How to Order 93 Series MAConnect 93 A - X X X - X X X - XX - D XX P - X XX Pilot Valve Options (see below) Valve Function 0 Base Only A Sgl. Oper. Sgl. Press. B Dbl. Oper. Sgl. Press. C Sgl. Oper. Dual
Bullet Valve (BV) Series
BULLET Valve Bullet Valve (BV) Series The Bullet Valve represents yet another evolution in air valve technology from MAC. VERY FEW PARTS LONG LIFE LIFTING SOLENOID ONE PIECE POPPET / ARMATURE (Patents
EtherNet/IP EtherCAT POWERLINK PROFINET Modbus/TCP
We are pleased to announce the release and availability of the MI/O-67 Fieldbus Platform. Our initial release includes several different protocol options in addition to several modules to ensure a complete
MAC VALVES EUROPE, INC.
CURRENT Technology Page Introduction Section 1 Section 2 Section 3 Section 4 Section 5 Section 6 Direct solenoid and solenoid pilot operated valves 9 Remote air valves 165 Mechanically and manually operated
82 Series MAConnect with Sub-D
82 Series MAConnect with Sub-D Maximum of 20 solenoids can be powered by a single multi-pin connector. Up to 40 solenoids can be powered by means of a second multi-pin connector station. Left or right
Table 1d - FSA for All Returns, Females Tax Year
PR 10 Newfoundland and Labrador A0A 20,250 597,345 1,920 1,720 2,580 3,150 1,960 1,610 1,360 1,030 1,020 740 550 460 630 470 410 290 290 70 20 A0B 8,850 249,804 780 740 1,200 1,520 1,010 790 540 430 370
CFR Series. Power Inductors OUTLINE FEATURES APPLICATIONS SPECIFICATIONS MITSUMI
CFR Series Coils, Transformers OUTLINE Power inductors for preventing the diffusion of noises generated from power circuits and suppressing noise components coming through the power lines. ø8.7 ø11 max.
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. CERAMIC CHIP CAPACITORS C0G (NP0), X7R, X5R, Z5U and Y5V Dielectrics 10,
INSTRUMENT PANEL CLUSTERS
INSTRUMENT PANEL CLUSTERS NOT BUYING AT THIS TIME REVISED ##### PART # MAKE APPLICATION 6/18/2018 PRICE 56045618 CHRY IPC 40.00 56045679 CHRY IPC 40.00 56051103 CHRY IPC 40.00 56049833 AC,AD CHRY IPC 40.00
7. Are you upgrading a complete engine from a TCM/ Bendix to a Slick system? If yes, purchase a complete Slick Ignition Upgrade Kit.
1.1 PRODUCT APPLICATION INFORMATION WORKSEET The following information will aid you in selecting the correct magneto, upgrade kit, or ignition harness: 1. Engine Manufacturer 2. Engine Model Number 3.
VACUUM PRESSURE PUMPS INSTALLATION CAUTIONS AND INFORMATION READ AND FOLLOW CAREFULLY!
F.A.A.-P.M.A. MODEL 1U128A AND 1U128B REVISION 17 February 21, 2002 VACUUM PRESSURE PUMPS INSTALLATION CAUTIONS AND INFORMATION READ AND FOLLOW CAREFULLY! The following information applies to all installations
SITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices Metering pipe with orifice plate and annular chambers 4/369
and annular chambers Application Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -10 to +00 C. Design Orifice plate with annular chambers consisting
and zero rpm. Maximum recommended pressure is 110 psi (7.6 bar). Adjustment for speed is explained under Selection Procedure.
CB Construction Single Flange Dual Flange The type CB element assembly is designed and built to provide dependable clutch or brake service in the most exacting industrial applications. It is suited to
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. CERAMIC CHIP CAPACITORS C0G (NP0), X7R, X5R, Z5U and Y5V Dielectrics 10,
SERVICE INSTRUCTION. 652 Oliver Street Williamsport, PA U.S.A. Tel Fax
652 Oliver Street Williamsport, PA. 17701 U.S.A. Tel. 570 323 6181 Fax. 570 327 7101 www.lycoming.com SERVICE INSTRUCTION DATE: March 8, 2012 Service Instruction No. 1098H (Supersedes Service Instruction
Grade boundaries June 2018 exams. GCSE Reformed (subjects which use the 9 to 1 grade scale)
Version 1.0 Grade boundaries June 2018 exams GCSE Reformed (subjects which use the 9 to 1 grade scale) This document presents grade boundaries for the new reformed GCSEs which use the 9 to 1 grade scale.
Multiplication Tables of Various Bases
THE NUMBER BASE 10 100 Ternary (Base 3) 1 2 10 2 11 20 10 20 100 Quaternary (Base 4) 1 2 3 10 2 10 12 20 3 12 21 30 10 20 30 100 Quinary (Base 5) 1 2 3 4 10 2 4 11 13 20 3 11 14 22 30 4 13 22 31 40 10
SERVICE INSTRUCTION. All Certified Lycoming direct drive engines. TIME OF COMPLIANCE: At owner s discretion.
652 Oliver Street Williamsport, PA. 17701 U.S.A. Telephone +1 (800) 258-3279 U.S. and Canada (Toll Free) Telephone +1 (570) 323-6181 (Direct) Facsimile +1 (570) 327-7101 Email Technicalsupport@lycoming.com
ROTARY SHAFT / OIL SEALS GASKETS LINER RINGS REPAIR KITS BONDED SEALS O RINGS. Automotive Seals VW BARNWELL THE SEAL OF APPROVAL
ROTARY SHAFT / OIL SEALS GASKETS LINER RINGS REPAIR KITS BONDED SEALS O RINGS Automotive Seals VW BARNWELL THE SEAL OF APPROVAL QUALITY AND SERVICE GUARANTEED Total Sealing Solutions Founded in 1972, M
DATE: February 13, 2019 Service Instruction No. 1037V (Supersedes Service Instruction No. 1037U) Engineering Aspects are FAA Approved
652 Oliver Street Williamsport, PA. 17701 U.S.A. Telephone +1 (800) 258-3279 U.S. and Canada (Toll Free) Telephone +1 (570) 323-6181 (Direct) Facsimile +1 (570) 327-7101 Email Technicalsupport@lycoming.com
LYCOMING CYLINDER PRICING
SHIPPING: 2415 EMBARCADERO WAY, PALO ALTO, CA 94303 MAILING: P.O. BOX 50608, PALO ALTO, CA. 94303-0608 Phone: 650-354-1399 Fax: 650-354-1395 LYCOMING CYLINDER PRICING CYLINDER PRICING ENGINE MODEL: O-235
DATE: May 19, 2000 Service Instruction No. 1443E (Supersedes Service Instruction No. 1443D) Engineering Aspects are FAA Approved
DATE: May 19, 2000 (Supersedes Service Instruction No. 1443D) Engineering Aspects are FAA Approved SUBJECT: MODELS AFFECTED: TIME OF COMPLIANCE: Approved Slick Magnetos on Textron Lycoming Engines See
Airflex CB Construction Section B
Airflex CB Construction Single Flange Element Dual Flange Element The type CB element assembly is designed and built to provide dependable clutch or brake service in the most exacting industrial applications.
TELESCOPIC CYLINDERS ø mm Series RT
TELESCOPIC CYLINDERS 25 63 mm Series RT The overall dimensions are one of the most imporant aspects: in comparison with a traditional ISO cylinder of the same a reduction in size of approx. 45% (with a
MOONEY INTERNATIONAL CORPORATION The Symbol of Performancet MOONEY SPECIAL LETTER Date:
MOONEY INTERNATIONAL CORPORATION The Symbol of Performancet MOONEY SPECIAL LETTER 15-24 Date: 11-19-2015 SUBJECT: MODELS/ S/N AFFECTED: To ADVISE MOONEY OWNERS/OPERATORS of the LYCOMING Service Instruction
General. Principles. 3-Trapped Key Switches. 11-Cat. No. Index. Logic. Power. Safety Switches Trapped Key Switches Overview
R Safety Trapped Key Overview Key Coding Below is an example reference guide that is useful in selecting and tracking codes. Start down the Aa column as the lower codes (typically Aa to Za) are stocked.
3/8 & 1/2 NPT. with 3/8 and 1/2 NPT ports for 4 Way - 2 & 3 Position see Pg locate counterbores in body to control static squeeze on seals.
8 SERIES /8 Ported Air Valves 1/ Ported Air Valves /8 & 1/ 1, 1A, 1B & 8 Series Note! Spring return & spring centered models NOT suitable for dry air service. Features & Way - Position. Way - &. operator
Flow Measurement SITRANS F O delta p - Primary differential pressure devices
Technical description Primary differential pressure devices to DIN EN ISO 5167 Nominal diameters EN: DN 50... DN 1000 ASME: 2 inch 40 inch Nominal pressure EN:... 0 ASME: 600 Orifice plates with annular
FedEx Express Rates. Effective Sept. 15, 2008
FedEx Express Rates Effective Sept. 15, 2008 Table of Contents FedEx Express Intra-Canada Rates 2 Postal Code Index 3 FedEx First Overnight 4 FedEx Intra-Canada Index 12 FedEx Priority Overnight 14 FedEx
3/8 & 1/2 NPT. 4-Way - 5 Ported - 2 Position - Type 2 Use on all 4 Way - 2 Position applications
8 SERIES: /8 Ported Air Valves, A & B SERIES: / Ported Air Valves /8 & /, A, B & 8 Series, & Way; & Position Operation to 50 psi Note! Spring return & spring centered models NOT suitable for dry air service.
Balanced Valve Series Multi-Purpose Direct-Acting Solenoid Valves
Balanced Valve Series Multi-Purpose Direct-Acting Solenoid Valves www.humphrey-products.com Humphrey Products Company P.O. Box 008 Kalamazoo, MI 4900 USA P.69.8.5500 F.69.8.4 BVSa-07 A privately owned
Constricting Type Clutches and Brakes
Constricting Type Clutches and Brakes B Constricting Features B-1 Element Descriptions B-3 CB Elements B-5 Technical and Dimensional Data B-9 Clutch and Brake Applications B-15 Mounting Components B-40
BULLET VALVE THINK GLOBAL ACT LOCAL. Our global distribution network is keeping your machines running around the clock around the world
THINK GLOBAL ACT LOCAL P A T E N T T E C H N O L O G Y TEL: 1-800-MAC VLVS TEL: 1 (48) 64-7700 FAX: 1 (48) 64-0549 www.macvalves.com mac@macvalves.com MAC VALVES, INC. 5555 ANN ABO OAD DUNDEE, MI 48131
2. COMPACT CYLINDERS series STRONG (RS, RQ)
2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic
Section 2 Proportional Quick Exhaust
V A L V E S Section 2 Proportional Quick Exhaust OPERATION OF THE PQE 1. The pilot operated regulator and the PPC5C are both fed from a common inlet. 2. The out port of the PPC5C sends pressure to the
Genuine Metaris Gear Product Technical Catalog. Pumps & Components - MH Series Bearing & Bushing Style
Genuine Metaris Gear Product Technical Catalog Pumps & Components - MH Series Bearing & Bushing Style www.metaris.com MH365 Series Bushing Pump Features Metaris Bushing Pumps & Motors are available in
Solenoid Valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm) A-1.
Solenoid Valves Poppet and Spool type solenoid actuated valves for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) n Eaton Brand ETON Screw-In Cartridge Valves E-VLSC-MC-E November 9 -. Solenoid
101 SERIES ISO-A BC
101 SERIES ISO-A Manufactured according ISO 7241-A norm, DN13 size meets also ISO 5675 requirements. Poppet Valve or Ball closing system. BSP, NPTF, SAE/ORB threads. Others available upon request. Materials
Sc h rader Bellows. CS Series Air Control Valves. 2 & 3-Way, Inline, Manifold & Stacking Direct Acting Solenoid Valves
Sc h rader Bellows 2 & 3-Way, Inline, Manifold & Stacking Direct cting Solenoid Valves INDEX PGE Features Inline Valves... 3 Stacking Valves... 4 Manifold Valves... 5 Valve Model Number System... 6 Solenoid
CYLINDER HEAD. Ref. Part No. Number Description Qty Remarks
A1 CYLINDER HEAD 1 JN6-11102-00-00 HEAD, CYLINDER.......... 1 2 JN6-11133-10-00. GUIDE, VALVE............ 2 3 JN6-11181-00-00 GASKET, CYLINDER HEAD... 1 4 95817-10070-00 BOLT, FLANGE............ 4 5 99530-14016-00
TECHNICAL CHARACTERISTICS
2 or 3-stage telescopic pneumatic cylinder Considering its high technological contents, this cylinder series represents without doubt the product with the highest degree of technical research and evolution
Balanced Valve Series Multi-Purpose Direct-Acting Solenoid Valves
Balanced Valve Series Multi-Purpose Direct-Acting Solenoid Valves www.humphrey-products.com Humphrey Products Company P.O. Box 008 Kalamazoo, MI 4900 USA P.69.8.5500 F.69.8.4 BVS-05 A privately owned US
Position and Safety Switches
Siemens AG 20 Position and Safety Switches groups 41K, 42A /2 Introduction SIRIUS 3SE5 mechanical position switches /4 General data 3SE5, plastic enclosures /13 - Enclosure width 31 mm acc. to EN 50047
Ports. Dr. Breit GmbH Carl-Zeiss-Straße 25 D Heiligenhaus phone-contact:
Solenoid operated EEx d IIC T6 Description of the Valve Directional control valves direct the flow in various directions (P A with 2/2 valves and P A // A T) with 3/2 valves. Available as 2/2 and 3/2 valves,
Action Automation & Controls, Inc.
IN-Stock Directional Control Valves Table of Contents MAC Small 3 Way Valves..................... - 34 Series, Cv up to.1.................... - 35 Series, Cv up to.17....................-5 36 Series, Cv
REAR ARM & SUSPENSION
ydrex_ptv A REAR ARM & SUSPENSION ydrex_ptv JW-F0--00 REAR ARM COMP. JN-F-0-00 BUSH 900-00-00 9079-00-00 NUT 970-000-00 BOLT 990-000-00 WASHER, SPRING 7 990-000-00 WASHER, PLATE JN-F-0-00 BUSH 9 9-0-00
Flow Measurement SITRANS F S Clamp-on
Clamp-on ultrasonic flowmeters Overview SITRANS F S clamp-on ultrasonic flowmeters provide highly accurate measurement while minimizing installation time and maintenance expense. Benefits Easy installation;
Limit Switches and Safety
and Safety Introduction Overview 3SE5 23., 3SE5 21. 3SF1 2.4 3SE5 24., 3SF1 244 3SE5 13., 3SE5 11., 3SF1 114 3SE5 12., 3SF1 124 3SE5 16. 3SE5 232, 3SE5 212, 3SF1 2.4 3SE5 132, 3SE5 112, 3SF1 1.4 Position
Solenoid valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm)
Hydraulic Screw-in Cartridge Valves (SiCV) Solenoid valves Poppet and Spool type solenoid actuated valves for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) Solenoid valves SOLENOID VLVES...- SV5-8-C/CM
Technical Data... 3 How to Order... 4 Dimensions... 5 Inline Mount Valve... 6 Manifold Dimensions and Part Numbers... 6
Table of Contents Minature Valve Series...3-14 RB Series...3-6 Technical Data.... 3 How to Order.... 4 Dimensions... 5 Inline Mount Valve.... 6 Manifold Dimensions and Part Numbers... 6 S Series...7-9
Heavy Duty Actuators CONTROLS. Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 in. lbs. Double Acting and Spring Return
CONTROLS Division of A-T Controls Heavy Duty Actuators Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to,600,000 in. lbs. Double Acting and Spring Return THD S E R I E S The Triac line
CORE RETURN REQUIREMENTS
RACK & PINION STEERING GEAR Type A SPR Code Located On Valve End Of Valve SPR Code 1. Cross reference part number on box to SPR 3. Match code found on part to SPR Codes obtained from SPR Code Identification
Flow Measurement SITRANS F S Clamp-on
Clamp-on ultrasonic flowmeters SITRANS FS20 Overview SITRANS F S clamp-on ultrasonic flowmeters provide highly accurate measurement while minimizing installation time and maintenance expense. Benefits
Chapter 10: Valves for Pipe Mounting
Contents Chapter : Valves for Pipe Mounting Series Description Size Body Page DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 1¼ 1½ 2 L-port T-port Pressure valves, manual operation R4V R4R Pressure relief function Pressure
REAR ARM & SUSPENSION
A REAR ARM & SUSPENSION JW-F0--00 REAR ARM COMP. JN-F-0-00 BUSH 900-00-00 909-00-00 NUT 90-000-00 BOLT 990-000-00 WASHER, SPRING 990-000-00 WASHER, PLATE JN-F-0-00 BUSH 9 9-0-00 0 90-00-00 NUT, SELF-LOCKING
DIAGNOSTIC TROUBLE CODE (DTC) DEFINITIONS
DIAGNOSTIC TROUBLE CODE (DTC) DEFINITIONS NOTE: Use the following table to identify the DTC and find the correct test step for the type of DTC retrieved. DIAGNOSTIC TROUBLE CODE (DTC) DEFINITION Diagnostic
ISO 5599/ Series Technical and Operating Data
ISO 5599/ Series...................................................................3-9 Technical and Operating Data......................................................................3- How to Order...................................................................................5-6
3 Port Solenoid Valve Direct Operated Poppet Type
3 Port Solenoid Valve Direct Operated Poppet Type VK300 Series Rubber Seal [Option] Universal porting Available for N.C. valve, N.O. valve, divider valve, selector valve, etc. C: 0.80 dm 3 /(s bar) (Passage
Parts and Service Manual Supplement
Parts and Service Manual Supplement Part No. 0 Rev A November 00 November 00 Important Read, understand and obey the safety rules and operating instructions in the TMZ0/0 Operator's Manual before attempting
Stars or starlets? Competitor overview switching devices. Only for internal use. sirius IN COMPARISON
Only for internal use Stars or starlets? Competitor overview switching devices sirius IN COMPARISON Who are the real stars? The comparison. Under ideal conditions, the human eye can make-out approximately
Серия MAC Pulse Valve PV06
Серия клапанов MAC Pulse Valve series разработана для прямой замены существующих решений. The MAC Pulse Valve обеспечивает использование инновационной сбалансированной шпули вместо мембраны. MAC также
Valvair Sprint TM Pneumatic Valves Solenoid & Pilot-Operated Directional Spool Valves. Catalog VAL-VS-E/USA April 2004
Valvair Sprint TM Pneumatic Valves Solenoid & Pilot-Operated Directional Spool Valves Catalog VAL-VS-E/USA April 2004 ! WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS
APPENDIX A Instruction Set. Op Code. T states Flags Main Effects. Instructions
APPENDIX A 8085 Instruction Set Instructions ACI byte CE 7 ALL A A + CY + byte ADC A 8F 4 ALL A A + A + CY ADC B 88 4 ALL A A + B + CY ADC C 89 4 ALL A A + C + CY ADC D 8A 4 ALL A A + D + CY ADC E 8B 4
I23 RD P 16N 00
Sandwich Pressure Regulators ISO 1; ISO 2 and ISO 3 Series Overview How to Order: (example) I23 RD 1 00 0 P 16N 00 Regulator Port Series Size I12 = ISO 1 1/4 I23 = ISO 2 3/8 I34 = ISO 3 1/2 Regulator Type
Field Variable Area Flowmeters BFP Global Purgemaster
Data Sheet IT Field Variable Area Flowmeters BFP Global Purgemaster 10A6100 n High Strength Stainless Steel Body - Rigid construction to maintain tube alignment and resistance to pipe strain. n "Snap-in"
Pilot Operated 2 Port Solenoid Valve for Dry Air
Pilot Operated Port Solenoid Valve for Dry ir VQ0/30 Series Compact and lightweight with large flow capacity [Option] VQ0 Weight (g) 46 80 C [dm 3 /(s bar)].5 (C8) 3.0 (C) Series VQ0 Series VCH VDW SX0
PARTS CATALOG 2003 G21AY (JR61) U.S.A., CANADA, EUROPE, OTHERS
PARTS CATALOG 2003 G21AY (JR61) U.S.A., CANADA, EUROPE, OTHERS OCTOBER 2002 1BJR6-100E1 FOREWARD This Parts Catalogue is related to the parts for the model(s) shown in the frame below. When you are ordering
CROSS REFERENCE LIST AIRTEX
AIRTEX E10007 7.21659.72 E10008 7.21659.72 E10009 7.21287.53 E10200M 72 200 00 E10201M 73 006 01 E10202M 73 010 00 E10202M ESS 273 E10203M 73 014 01 E10204M 73 068 00 E10205M 73 080 01 E10206M 73 080 02
Valve Products. Valve Products Section D. Valve Products. Catalog PDN1000-3US Parker Pneumatic
Section irect Acting Valves - irect Acting Pictorial Index - www.parker.com/pneu/valve Inline continued N - Inline Poppet Inline or stacking /8 inch ports Pressures 0 to 5 PSIG Temperatures F to 5 F Flow
CONTENTS ALTERNATE FOR SUN ROOF C2 ALTERNATE FOR WINDSHIELD BATTERY CHARGER BODY 2
SUN ROOF C2 2 FITTING ELECTRICAL 1 0-11 A1 REAR ARM SUSPENSION 1 JW2-F2110-00-00 REAR ARM COMP.......... 1 2 JN6-F2123-10-00 BUSH 1.................. 1 3 90105-13864-00 BOLT, FLANGE............ 1 4 90179-13878-00
Tie rods cylinders to ISO standard
Tie rods cylinders to ISO 5552 standard seriescpui DESCRIPTION Cylinders series CPUI comply with ISO 5552 standard, being in this way completely interchangeable with the well-known cylinders to ISO 643
TeSys GS. Data for Designers. Contents
TeSys GS Technical Data for Designers Contents Characteristics: > switch-disconnector... B5/16 to B5/21 > auxiliary contacts...b5/22 Dimensions... B5/23 to B5/31 Schemes...B5/31 B5/15 Characteristics -
2/2-way, 3/2-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 - cartridge ø4
CATALOGUE > Release 8.5 > Directly operated solenoid valves Series A Directly operated solenoid valves Series A /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 -
Electrical Interface Dimensional Drawings Connector Kits
Table of Contents ISO 99/ Series...3-9 Technical and Operating Data....3- How to Order....-6 Valve and Regulator Dimensions... 7 Base Assembly... 8 Manifold Block Assembly... 9 Manifold Assembly Kits...