PARTS CATALOGUE / TECHNICAL GUIDE
|
|
|
- Beverly Chapman
- 6 years ago
- Views:
Transcription
1 PRTS CTLOGUE / TECHNICL GUIDE [SPECIFICTIONS] Cal. 7T62/7T92/7T94 Item Cal. No. 7T62 7T92 7T94 Movement The illustrations refer to Cal. 7T62. (x 1.0) Movement size Outside diameter Casing diameter Ø 27.6 mm Ø 27.0 mm Height 3.3 mm Time Main time Hour, minute and small second hands indication watch Minute hand 1/5-second hand (moves at 0.2-second intervals) Hour and minute hands Second hand 1/20-second hand (moves at 0.05-second intervals) Minute hand 1/5-second hand (moves at 0.2-second intervals) larm Driving system dditional mechanism Loss/gain Hour and minute hands (Minute hand moves at 1-minute intervals.) Step motor (Load compensated driving pulse type) 4 pcs. 4 pcs. 3 pcs. Electronic circuit reset switch Train wheel setting device Date calendar Instant setting device for date calendar attery life indicator watch function Measures up to 60 minutes in 1/5-second increments. ccumulated elapsed time measurement Split time measurement Single-time alarm function watch function Measures up to 12 hours in 1/20-second increments. ccumulated elapsed time measurement Split time measurement Monthly rate at normal temperature range: less than 15 seconds watch function Measures up to 60 minutes in 1/5-second increments. ccumulated elapsed time measurement Split time measurement Regulation system Measuring gate by quartz tester attery attery No. Voltage attery life Jewels Nil Use 10-second gate. SEIKO SR927W, SONY SR927W, Maxell SR927W, Matsushita SR927W 1.55 V pprox. 3 years Nil SEIKO SR927SW, SONY SR927SW, Maxell SR927SW, Matsushita SR927SW pprox. 3 years pprox. 5 years
2 REMRKS ON REPIRING CL. 7T62/7T92/7T94 Unlike the other Cal. 7T Series watches, which have two crowns and three buttons, Cal. 7T62, Cal. 7T92 and Cal. 7T94 have one crown and two buttons. ut their basic movement structure is similar in other respects, and the knowledge and technique you have gained in handling the previous Cal. 7T Series watches will come in handy when you repair Cal. 7T62, 7T92 as well as 7T94. When repairing, however, you are requested to have the full knowledge of the features characteristic of these watches and strictly observe the repairing and checking instructions provided in this guide so that the watches will be repaired correctly. FETURES s Cal. 7T62/7T92/7T94 has fewer crowns and buttons, the operating procedures for alarm setting (for Cal. 7T62 only), time setting and stopwatch hand position adjustment differ from those of the other Cal. 7T Series watches. s a result of this structure change, the battery life of Cal. 7T62/7T92/7T94 has increased as compared with that of the other Cal. 7T series watches. utton utton utton 5 Crown 5 Crown Crown utton utton utton CL. 7T62 CL. 7T92 CL. 7T94 1. STOPWTCH FUNTION Measurement performance Cal. 7T62 and 7T94: Measures up to 60 minutes in 1/5 second increments. Displays the elapsed time with the stopwatch minute and 1/5-second hands. Cal. 7T92: Measures up to 12 hours in 1/20 second increments. Displays the elapsed time with the stopwatch hour, minute, second and 1/5-second hands. utton operation Standard Measurement ccumulated Elapsed Time Measurement Restart Split Time Measurement Split Split release Measurement of Two Competitors Finish time of 2nd competitor 1st competitor finishes Finish time of 2nd competitor 2. LRM FUNCTION (For Cal. 7T62 only) The alarm sounds only once at a designated time within the coming 12 hours and it is automatically disengaged. Pushing the crown back into the normal position after setting the alarm will prevent the set alarm time from changing by an accidenal pressing of the button. CROWN Pull out to the 1st click. Press to set the alarm time. CROWN Push back in to the normal position. 2/27
3 PRTS CTLOGUE Cal. 7T62/7T92/7T94 Disassembling procedures Figs. : Reassembling procedures Figs. : Lubricating: Types of oil Oil quantity O-3 (or MS-) O-2 (or MS-F) SEIKO Watch Oil S-6 Normal quantity Liberal quantity The illustration refers to Cal. 7T62, 7T92 and 7T Pin for date dial guard pages 10& Date dial guard 3 ( ) Date dial The type of the part is determined based on the case design. page 10 Remarks on removing the winding stem To remove the winding stem when taking out the movement from the case or while disassembling the parts during repair work, be sure to pull out the crown to the first click, and then, remove the winding stem while pushing the setting lever Intermediate wheel for calendar correction Date corrector setting wheel Date driving wheel Hour wheel for alarm Hour wheel page 14 Lubricating of some parts is shown in II. REMRKS ON DISSSEMLING ND RESSEMLING. 3/27
4 PRTS CTLOGUE Cal. 7T62/7T92/7T94 The illustration refers only to Cal. 7T attery clamp screw attery clamp screw (2 pcs.) attery clamp page Circuit block cover screw (4 pcs.) 11 SR927W attery Circuit block cover screw page 1 ( ) Piezoelectric element Circuit block cover Case back Friction spring Circuit block pages 10,11& uzzer lead terminal attery connection ( ) Pin for train wheel bridge pages 10& Train wheel bridge page Small second wheel Fifth wheel & pinion First intermediate wheel Second intermediate wheel Intermediate minute counting wheel Minute counting wheel Second counting wheel Fourth wheel & pinion Third wheel & pinion Minute wheel Intermediate alarm wheel Center wheel for alarm Minute wheel for alarm Lubricating of some parts is shown in II. REMRKS ON DISSSEMLING ND RESSEMLING. 4/27
5 PRTS CTLOGUE The illustration refers only to Cal. 7T62. Cal. 7T62/7T92/7T Coil block for alarm Coil block () Coil block for chronograph second Step rotor Chronograph rotor for minute Coil block for chronograph minute larm rotor Chronograph rotor for second Switch lever () Setting lever Yoke Clutch wheel Spacer for center wheel & pinion Setting wheel 45 ( ) Winding stem The type of the part is determined based on the case design Center wheel & pinion page 10 & Train wheel setting lever Rotor stator for chronograph second Rotor stator Rotor stator for alarm Rotor stator for chronograph Switch lever () Main plate page 22 Lubricating of some parts is shown in II. REMRKS ON DISSSEMLING ND RESSEMLING. 5/27
6 PRTS CTLOGUE Cal. 7T62/7T92/7T94 The illustration refers only to Cal. 7T attery clamp screw attery clamp screw (2 pcs.) attery clamp page Circuit block cover screw (4 pcs.) 11 SR927SW attery page Circuit block cover screw Circuit block cover Friction spring Circuit block pages 10, 11& attery connection ( ) Pin for train wheel bridge pages 10& Train wheel bridge page Small second wheel Fifth wheel & pinion Second counting wheel Fourth wheel & pinion Third wheel & pinion First intermediate wheel Second intermediate wheel Intermediate wheel (1/20) Second counting wheel (1/20) Minute wheel Intermediate minute counting wheel Minute counting wheel Intermediate wheel for hour counting Lubricating of some parts is shown in II. REMRKS ON DISSSEMLING ND RESSEMLING. 6/27
PARTS CATALOGUE / TECHNICAL GUIDE
PRTS CTLOGUE / TECHNICL GUIDE Cal. 7T62, 7T92 [SPECIFICTIONS] Item Cal. No. 7T62 7T92 Movement The illustrations refer to Cal. 7T62. (x 1.0) Movement size Outside diameter Casing diameter ø27.6 mm ø27.0
PARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE [SPECIFICATIONS] Item Movement Cal. No. V653B Movement size Outside diameter Casing diameter Height ø29.5 mm 26.0 mm between 3 o clock and 9 o clock sides ø28.8 mm 3.7
PARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE [SPECIFICATIONS] Item Movement Cal. No. Cal. 7N3C Cal. 7N33C Cal. 7N39C 7N3C 7N33C 7N39C Outside diameter The illustrations refer to Cal. 7N33C. ø4.0 mm 1.5 mm between
PARTS LIST / TECHNICAL GUIDE Perpetual Calendar/Alarm Chronograph Cal. 7T86A
PARTS LIST / TECHNICAL GUIDE Perpetual Calendar/Alarm Chronograph [SPECIFICATIONS] Item Cal. No. Movement 7T86A 7T86A 3 hands (hour, minute, and small second hands) Interval of hands movements Driving
PARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE [SPECIFICATIONS] Item Cal. No. 6T63A 3 hands (hour, minute, and small second hand) 24-hour indicator Date indicator Diameter Outside: Ø 30.8 mm Height: 5.1 mm Casing:
Caution for disassembling The hour wheel is made of engineering plastics. When pulling out the hour hand, take care not to damage the hour wheel.
III. REMRKS ON DISSSEMLING ND RESSEMLING Hands Dial Caution for disassembling The hour wheel is made of engineering plastics. When pulling out the hour hand, take care not to damage the hour wheel. How
PARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE [SPECIFICATIONS] Item Movement Cal. No. Cal. 5T82A 5T82A (x 1.0) Movement size Time indication Driving system Outside diameter Casing diameter Height (Movement intervals)
Revised on : 25 November 2014 TECHNICAL GUIDE PARTS CATALOGUE. Cal.VC00/01E ANALOGUE QUARTZ. SII Products
Revised on : 25 November 2014 TECHNICAL GUIDE & PARTS CATALOGUE ANALOGUE QUARTZ PARTS CATALOGUE / TECHNICAL GUIDE Cal.VC00 / 01E [SPECIFICATION] Item Cal. No. VC00E VC01E Version-01 Movement Movement size
Revised on : 29. Feb TECHNICAL GUIDE PARTS CATALOGUE. Cal.VK61/64 ANALOGUE QUARTZ. SII Products
Revised on : 29. Feb. 2016 TECHNICAL GUIDE & PARTS CATALGUE Cal. ANALGUE QUARTZ [SPECIFICATIN] Item PARTS CATALGUE / TECHNICAL GUIDE Cal. Cal. No. VK61 VK64 Version03 Movement Movement size Time indication
Revised on : 29. Feb TECHNICAL GUIDE PARTS CATALOGUE. Cal.VK63/67/83 ANALOGUE QUARTZ. SII Products
Revised on : 29. Feb. 2016 TECHNICAL GUIDE & PARTS CATALGUE Cal. ANALGUE QUARTZ [SPECIFICATIN] PARTS CATALGUE / TECHNICAL GUIDE Cal. Cal. No. Item VK63 VK67 VK83 Version04 Movement Movement size Time indication
Issued on: 11. May TECHNICAL GUIDE PARTS CATALOGUE. Cal.VK61/64 ANALOGUE QUARTZ. SII Products
Issued on: 11. May. 2012 TECHNICAL GUIDE & PARTS CATALGUE Cal. ANALGUE QUARTZ [SPECIFICATIN] Item PARTS CATALGUE / TECHNICAL GUIDE Cal. Cal. No. VK61 VK64 Movement Movement size utside diameter Casing
PARTS LIST / TECHNICAL GUIDE ANALOGUE SOLAR Cal. V175A [SPECIFICATIONS]
![PARTS LIST / TECHNICAL GUIDE ANALOGUE SOLAR Cal. V175A [SPECIFICATIONS]](/thumbs/87/95546534.jpg "PARTS LIST / TECHNICAL GUIDE ANALOGUE SOLAR Cal. V175A [SPECIFICATIONS]")
PARTS LIST / TECHNICAL GUIDE ANALOGUE SOLAR [SPECIFICATIONS] Item Cal. No. V175A 3 hands (hour, minute and small second hands), 24-hour indicator Diameter: Height: Outside 27.6 mm.casing 27.0 mm 4.4 mm
Revised on : 9. Mar TECHNICAL GUIDE PARTS CATALOGUE. Cal.VJ22B Cal.VJ24B ANALOGUE QUARTZ. SII Products
Revised on : 9. Mar. 2016 TECHNICAL GUIDE & PARTS CATALOGUE Cal.VJ22B Cal.VJ24B ANALOGUE QUARTZ PARTS CATALOGUE / TECHNICAL GUIDE VJ22B VJ24B [SPECIFICATION] Item Cal. No. VJ22B VJ24B Version-02 Movement
Revised on : 9. Mar TECHNICAL GUIDE PARTS CATALOGUE. Cal.VJ20C Cal.VJ21C ANALOGUE QUARTZ. SII Products
Revised on : 9. Mar. 2016 TECHNICAL GUIDE & PARTS CATALOGUE Cal.VJ20C Cal.VJ21C ANALOGUE QUARTZ [SPECIFICATION] Item PARTS CATALOGUE / TECHNICAL GUIDE Cal. No. VJ20C VJ21C VJ20C VJ21C Version-02 Movement
PARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE [SPECIFICATIONS] Item Movement Cal. No. Cal. 7T84A 7T84A (x 1.0) Movement size Time indication Driving system Outside diameter Casing diameter Height Additional mechanism
Revised on. : 05. Jun TECHNICAL GUIDE PARTS CATALOGUE. Cal.VJ12B Cal.VJ14B ANALOGUE QUARTZ. SII Products
Revised on. : 05. Jun. 2018 TECHNICAL GUIDE & PARTS CATALOGUE Cal.VJ12B Cal.VJ14B ANALOGUE QUARTZ [SPECIFICATION] PARTS CATALOGUE / TECHNICAL GUIDE VJ12B VJ14B Cal. No. Item VJ12B VJ14B Version-02 Movement
PARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE [SPECIFICATIONS] Item Movement Cal. No. 3M62A (x 1.0) Movement size Outside diameter Casing diameter Height ø24.0 mm ø23.3 mm 4.2 mm Time indication Driving system Additional
Revised on : 05. Jun TECHNICAL GUIDE PARTS CATALOGUE. Cal.VJ23B Cal.VJ33B ANALOGUE QUARTZ. SII Products
Revised on : 05. Jun. 2018 TECHNICAL GUIDE & PARTS CATALOGUE Cal.VJ23B Cal.VJ33B ANALOGUE QUARTZ [SPECIFICATION] Item PARTS CATALOGUE / TECHNICAL GUIDE Cal. No. VJ23B VJ33B VJ23B VJ33B Version-02 Movement
PARTS LIST / TECHNICAL GUIDE
PARTS LIST / ANALOGUE SOLAR [SPECIFICATIONS] Item Cal. No. V172A/V174A V172A V174A 3 hands (hour, minute and small second hands) 3 hands (hour, minute and small second hands), 24-hour indicator Diameter:
PARTS CATALOGUE/TECHNICAL GUIDE Cal. 7D46A, 7D48A
PARTS CATALOGUE/TECHNICAL GUIDE Cal. 7D46A, 7D48A SPECIFICATIONS Item Cal. No. 7D46A, 7D48A Movement Movement Outside diameter size Casing diameter Height Time indication (Movement intervals) Driving system
Cal.VJ5*B Series (VJ52/53/55)
Revised on : 05. Jun. 208 TECHNICAL GUIDE & PARTS CATALOGUE Series (VJ52/53/55) ANALOGUE QUARTZ PARTS CATALOGUE / TECHNICAL GUIDE [SPECIFICATION] Item Cal. No. Series Series VJ52B VJ53B VJ55B Version-02
Cal.VJ4*B Series (VJ42/43/45)
Revised on : 05. Jun. 2018 TECHNICAL GUIDE & PARTS CATALOGUE Series (VJ42/43/45) ANALOGUE QUARTZ [SPECIFICATION] Item PARTS CATALOGUE / TECHNICAL GUIDE Cal. No. Series Series VJ42B VJ43B VJ45B Version-02
PARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE PARTS CATALOGUE / TECHNICAL GUIDE (p. 1 21) CATÁLOGO DE PARTES / GUÍA TÉCNICA (p. 23 43) [SPECIFICATIONS] Item Movement Cal. No. 5J22A (x 1.0) Movement size Outside diameter
PARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE PARTS CATALOGUE / TECHNICAL GUIDE (p. 1 22) [SPECIFICATIONS] Item Movement Cal. No. 5J32A (x 1.0) Movement size Outside diameter Casing diameter ø26.4 mm ø25.6 mm Height
Cal. VR33A CHRONOGRAPH 13 1/ mm. 3 years. Ø 30.6mm. Watch Movement Specification and Drawing. Movement Size. Casing Diameter.
Watch Movement Specification and Drawing CHRONOGRAPH Cal. VR33A Movement Size 13 1/2 Casing Diameter Ø 30.6mm Height 3.97mm Battery Life 3 years Cal. VR33A Date: 31/Aug./'18 Items Rev. Page Specifications
PARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE [SPECIFICATIONS] Cal. H021B Cal. H022A Cal. H023A Item Movement Cal. No. H021B, H022A, H023A Movement size Time indication Driving system Display system Outside diameter
PARTS LIST /TECHNICAL GUIDE ANALOGUE SOLAR Cal. V157A/V158A [SPECIFICATIONS]
![PARTS LIST /TECHNICAL GUIDE ANALOGUE SOLAR Cal. V157A/V158A [SPECIFICATIONS]](/thumbs/86/93687150.jpg "PARTS LIST /TECHNICAL GUIDE ANALOGUE SOLAR Cal. V157A/V158A [SPECIFICATIONS]")
PARTS LIST /TECHNICAL GUIDE ANALOGUE SOLAR [SPECIFICATIONS] Cal. No. Item V157A V157A/V158A Movement V158A Diameter Outside: 28.6 mm Casing: 24.0 mm Height: 3.5mm 3 hands (hour, minute and second hands)
PARTS LIST/ TECHNICAL GUIDE
/ TECHNICAL GUIDE Cal. 7S26C/7S36C [SPECIFICATIONS] Item Cal. No. 7S26C 7S36C 5 4 28 29 3 2 1 31 30 3 hands (hour, minute and second hands) Date indication Day indication Movement size Diameter Outside:
PARTS LIST / TECHNICAL GUIDE
PARTS LIST / TECHNICAL GUIDE Analogue Solar [SPECIFICATIONS] Item Cal. No. V114A 2 hands (hour, minute hands) Diameter Outside: Ø 15.5 mm x 11.8 mm Casing: Ø 15.15 mm x 11.80 mm Height: Ø 2.0 mm Interval
TECHNICAL GUIDE PARTS CATALOGUE. Cal.NE15 AUTOMATIC MECHANICAL. SII Products
TECHNICAL GUIDE & PARTS CATALOGUE AUTOMATIC MECHANICAL [SPECIFICATION] Item PARTS CATALOGUE / TECHNICAL GUIDE Version-01 NE15 Cal. No. Movement Movement size Time indication Basic function Frequency Accuracy
PARTS LIST / TECHNICAL GUIDE
[SPECIFICATIONS] PARTS LIST / TECHNICAL GUIDE Automatic Item Cal. No. 4R35B/4R36A The figures below are Cal. 4R36A. 3 hands (hour, minute and second hands) Day and Date indication Movement size Diameter
Cal. VS75A SOLAR SERIES. 4.40mm. Approx. 6 months. Ø 27.0mm. Watch Movement Specification and Drawing. Movement Size. Casing Diameter.
Watch Movement Specification and Drawing SOLAR SERIES Cal. VS75A Movement Size 12 Casing Diameter Ø 27.0mm Height 4.40mm Running Time Approx. 6 months Cal. VS75A Date: 1/Sep./'15 Items Rev. Page Features
Cal. YM92A. φ27.0 mm H 3.7 mm. S.EPSON Products
Cal. YM92A φ27.0 mm H 3.7 mm Items Rev. Page Specifications 03 1 Appearance 00 2 Casing 03 3 Hand fitting 01 4 Hand setting stem 01 5 Dial-01 01 6-01 Dial-02 00 6-02 Dial-03 00 6-03 Dial-04 00 6-04 Casing
TECHNICAL GUIDE PARTS CATALOGUE. Cal.NE20 AUTOMATIC MECHANICAL. SII Products
TECHNICAL GUIDE & PARTS CATALOGUE AUTOMATIC MECHANICAL [SPECIFICATION] Item PARTS CATALOGUE / TECHNICAL GUIDE Version-01 NE20 Cal. No. Movement Movement size Time indication Basic function Frequency Accuracy
Revised on : 07. Feb TECHNICAL GUIDE PARTS CATALOGUE. Cal.NE15C AUTOMATIC MECHANICAL. SII Products
Revised on : 07. Feb. 2018 TECHNICAL GUIDE & PARTS CATALOGUE AUTOMATIC MECHANICAL SII Products [SPECIFICATION] Item PARTS CATALOGUE / TECHNICAL GUIDE Version-02 NE15C Cal. No. Movement Movement size Time
PARTS CATALOGUE / TECHNICAL GUIDE Cal.NE57A Version-01 NE57A [SPECIFICATION] Cal. No. Item. Movement. Outside diameter. Movement size.
![PARTS CATALOGUE / TECHNICAL GUIDE Cal.NE57A Version-01 NE57A [SPECIFICATION] Cal. No. Item. Movement. Outside diameter. Movement size.](/thumbs/89/100003756.jpg "PARTS CATALOGUE / TECHNICAL GUIDE Cal.NE57A Version-01 NE57A [SPECIFICATION] Cal. No. Item. Movement. Outside diameter. Movement size.")
[SPECIFICATION] Item PARTS CATALOGUE / TECHNICAL GUIDE NE57A Cal. No. Movement Movement size Time indication Basic function Frequency Accuracy Duration time Outside diameter Static accuracy Winding the
Cal. VR43A SOLAR SERIES 13 1/ mm. Approx. 4 months. Ø 30.6mm. Watch Movement Specification and Drawing. Movement Size. Casing Diameter.
Watch Movement Specification and Drawing SOLAR SERIES Cal. VR43A Movement Size 13 1/2 Casing Diameter Ø 30.6mm Height 4.52mm Running Time Approx. 4 months Date: 30/Nov./'17 Cal. VR43A Items Rev. Page Features
PARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE [SPECIFICATIONS] Brand SEIKO Item Cal. No. 7S26B 7S36B Movement Movement size Outside diameter Casing diameter Height (x 1.5) Ø 27.4 mm Ø 27.0 mm 4.9 mm Time indication
Cal.5D22A TECHNICAL GUIDE
No. PROCESS ILLUSTRATIONS AND SPECIAL INSTRUCTIONS ETC. Mount the secondary battery unit. Mount the insulator for secondary battery. Mount the secondary battery guard. Fix the insulator for secondary battery
Cal. AS32A SOLAR SERIES 10 1/ mm. Approx. 4 months. Ø 23.3mm. Watch Movement Specification and Drawing. Movement Size. Casing Diameter.
Watch Movement Specification and Drawing SOLAR SERIES Cal. AS32A Movement Size 10 1/2 Casing Diameter Ø 23.3mm Height 4.61mm Running Time Approx. 4 months Date: 31/Oct./'16 Cal. AS32A Items Rev. Page Features
Revised on : 23. May TECHNICAL GUIDE PARTS CATALOGUE. Cal.NH70/71 AUTOMATIC MECHANICAL. SII Products
Revised on : 23. May. 2018 TECHNICAL GUIDE & PARTS CATALOGUE AUTOMATIC MECHANICAL SII Products [SPECIFICATION] PARTS CATALOGUE / TECHNICAL GUIDE NH70 - NH71 Gilt version of NH70 Movement Movement size
7D** Technical Instruction No.1
Assembling the switching unit Set the main plate. 91 Set the main plate. 90 89 88 87 86 85 84 Set the lead pin for RZ1. Set the hour and minute stator. Set the second stator. Set the generating stator.
Cal. VS22A SOLAR SERIES 7 3/ mm. Approx. 6 months. Ø 18.1mm. Watch Movement Specification and Drawing. Movement Size. Casing Diameter.
Watch Movement Specification and Drawing SOLAR SERIES Cal. VS22A Movement Size 7 3/4 Casing Diameter Ø 18.1mm Height 2.76mm Running Time Approx. 6 months Cal. VS22A Date: 29/Jun./'18 Items Rev. Page Features
Cal. VS37A SOLAR SERIES 10 1/ mm. Approx. 6 months. Ø 24.0mm. Watch Movement Specification and Drawing. Movement Size. Casing Diameter.
Watch Movement Specification and Drawing SOLAR SERIES Cal. VS37A Movement Size 10 1/2 Casing Diameter Ø 24.0mm Height 2.98mm Running Time Approx. 6 months Date: 15/Dec./'17 Cal. VS37A Items Rev. Page Features
The chronograph calibres CHRO PC 17 jewels CHRO C12 PC 17 jewels CHRO C12 PC AMPM GMT 17 jewels CHRO PC CAL 17 jewels
Technical guide The chronograph calibres 860 27 CHRO PC 17 jewels 861 27 CHRO C12 PC 17 jewels 910 27 CHRO C12 PC AMPM GMT 17 jewels 930 27 CHRO PC CAL 17 jewels o 27.00 mm / Power-reserve Jewel number
Cal. VS3JA SOLAR SERIES 10 1/ mm. Approx. 6 months. Ø 24.0mm. Watch Movement Specification and Drawing. Movement Size. Casing Diameter.
Watch Movement Specification and Drawing SOLAR SERIES Cal. VS3JA Movement Size 10 1/2 Casing Diameter Ø 24.0mm Height 3.47mm Running Time Approx. 6 months Date: 2/May/'17 Cal. VS3JA Items Rev. Page Features
Calibre General information for Calibre Exploded views for calibre Specific information for calibre
Technical Guide TG-19-C-024-E C Produced by : pelrom Date: 20.09.2010 3 Modifications: see last page CALIBRE 3220 Version A 131/4 Ø 30 mm Height on movement Power reserve Number of jewels Frequency Lift
Specific information for calibre 3603
Fig. 1.0 1.0 Assembling of date indication 1. Stem in position 3 : Turn anti-clockwise the driving wheel for date unlocking yoke (reference 33029) until the finger of this wheel is aligned with the pin,
BULOVA MODELS. Specifications. Designation of Types. 11 AOAC 11 AOACB Automatic 11 AOACD. Date. Movement DIAL SIDE TRAIN SIDE.
DIAL SIDE TRAIN SIDE BULOVA MODELS 11 AOAC 11 AOACB 11 AOACD Date Day + Date Scale 1:1 Specifications Movement 11y,'" Lever escapement 17 or 23 jewels Unbreakable and self-lubricated mainspring Total running
TECHNICAL INFORMATION INFORMACION TECNICA
TECHNICL INFORMTION INFORMCION TECNIC CITIZEN QURTZ Cal. No. E76 (Cal. No. E760) ENGLISH Contents 1. FETURES...1 2. BEFORE USING...1 3. SPECIFICTIONS...2 4. SETTING THE TIME ND DTE...3 5. FUNCTIONS UNIQUE
PARTS LIST / TECHNICAL GUIDE Automatic Cal.4R71A
[SPECIFICATION] Item PARTS LIST / TECHNICAL GUIDE Automatic Cal.4R71A Cal. No. 4R71A 3 Hands (Hour, Minute and Second hands) Movement Size Diameter Outside : φ27.4 mm Casing : φ27.0 mm Height : 5.32 mm
CALIBRE Q SCS CAL CORH CORM CORS 7 jewels Description et performances
Technical guide CALIBRE 1370 25.60 Q SCS CAL CORH CORM CORS 7 jewels Description et performances The caliber 1370, destined for a man's electronic watch with analogical display, is fitted with a quartz
Cal. VS17A SOLAR SERIES 5 1/ mm. 2.79mm. Approx. 6 months. Watch Movement Specification and Drawing. Movement Size.
Watch Movement Specification and Drawing SOLAR SERIES Cal. VS17A Movement Size 5 1/2 Casing Diameter 11.8 15.15 mm Height 2.79mm Running Time Approx. 6 months Date: 31/Aug/'17 Cal. VS17A Items Rev. Page
Table of ConTenTs. Analog Chronographs 1/1 of a Second - Type C with small chronograph seconds and 24-hour hands 15
Table of ConTenTs 2- and 3-Hand Models 1 Date/Big Date Display Models - Type A 2 Date/Big Date Display Models - Type B 3 Automatic Models 4 Multi-Eye Models 5 Multi-Eye Models with Retrograde Day/Date
Technical Guide TG-19-C-074-E A CALIBRE Thermo-compensated
Technical Guide TG-19-C-074-E A Produced by : selrom Date : 19.07.2011 CALIBRE 5666 Version A 15 Ø 34.60 mm P4 P1 P3 P2 Version Thermo-compensated Height of movement 13.30 mm Number of jewels 9 Exclusive
automatic, with center sweep-second automatic, calendar with center sweep-second automatic, day and date with center sweep-second
DIAL SIDE TRAIN SIDE Scale 1:1 Specifications Movement Automatic mechanism 11112 Ligne, lever escapement Diameter of the plate 25.60 mm Unbreakable and self-lubricated mainspring Total running time: 42
METAL MOVEMENT MADE IN JAPAN
2018-2019 METAL MOVEMENT MADE IN JAPAN Cal. 2035 2035 the representative movement of MIYOTA. After the 2035 has appeared to the market, a lot of brands is using regularly all over the world. JAPAN MOVEMENT
Servicing a Poljot 3133 movement
Servicing a Poljot 3133 movement A service guide made by WUS member SLLS, June 2015 Editor: WUS member Polmax3133 Use this guide at your own risk. To dismantle a 3133 movement, just start at the end of
WARRANTY / INSTRUCTIONS / REGISTRATION
WRRNTY / INSTRUCTIONS / REGISTRTION Founded in 1991, ndroid came to fruition through Wing Liangs fascination and dedication to create a futuristic timepiece that could combine the traditional values of
Technical Guide TG-19-C-053-E C. Prod. by: pelrom Date: Modifications: see last page CALIBRE 1532
Technical Guide TG-19-C-053-E C Prod. by: pelrom Date: 24.10.2008 3 Modifications: see last page CALIBRE 1532 Version A Version B Version C Version D 11 1/2 Ø 25,60 mm 1 2 3 ASS E.O.L COR Height on movement
2. Uncasing. 5. Remove the clamp screws (casing ring / middle and movement / casing ring) and the clamps. 6. Remove the casing ring.
Calibre 360 1. Presentation 2. Uncasing 3. Chronograph movement (module) / M2 replacement procedure 4. Overhauling the base movement 5. Assembling the base movement with the chronograph movement 6. Chronograph
miyotamovement.com QUICK & EASY ACCESS TO NECESSARY INFORMATION
017-018 and Start and Stop the chronograph Reset the chronograph DO NOT set Day and between 9:00pm 1:00am Center Chronograph Chronograph our Pusher Small Second Chronograph Minute Push A to reset the hands
PARTS LIST FOR NO. 3 SERIES PISTOL AND T HANDLE SCREWDRIVERS
PARTS LIST FOR NO. 3 SERIES PISTOL AND T HANDLE SCREWDRIVERS NON-REVERSING HANDLE ASSEMBLY (SERIAL NO S. STARTING WITH B & D ) Fig. Part Form A278F Date 10-00/B Page 1 of 6 4. 14309 Ring O 5. 14312 Ring
Reference number: Worksheet/Receipt. Owners name: - Telephone: Description of item(s) received, including accessories:
Worksheet/Receipt Owners name: - Address: n/a Telephone: n/a Description of item(s) received, including accessories: Rotary quartz head only. Work required based on initial inspection: Watch does not run
TECHNICAL SPECIFICATIONS OF THE SPLIT SECONDS CHRONOGRAPH RICHARD MILLE RM 004-V2 FELIPE MASSA
TECHNICAL SPECIFICATIONS OF THE SPLIT SECONDS CHRONOGRAPH RICHARD MILLE RM 004-V2 FELIPE MASSA Following the success of the RM 005 in 2006 and the RM 011 in 2007, the RM 004 is the latest model to carry
./#0#. 1"&." 1994 ELECTRICAL Suzuki of America Corp. - Starters. Swift
!"" #$%!& '()!)((*(+,*)- 1994 ELECTRICAL Suzuki of America Corp. - Starters Swift Two types of starter motors are used, conventional and reduction gear. Both types of starters consist of yoke assembly,
Cal. Y121E STANDARD 6 3/ mm. 2.99mm. 2 years. Watch Movement Specification and Drawing. Movement Size. Casing Diameter.
Watch Movement Specification and Drawing STANDARD Cal. Y121E Movement Size 6 3/4 8 Casing Diameter 15.3 17.8 mm Height 2.99mm Battery Life 2 years Cal. Y121E Date: 20/Oct./'14 Items Rev. Page Specifications
DRIVE AXLE Volvo 960 DESCRIPTION & OPERATION AXLE IDENTIFICATION DRIVE AXLES Volvo Differentials & Axle Shafts
DRIVE AXLE 1994 Volvo 960 1994 DRIVE AXLES Volvo Differentials & Axle Shafts 960 DESCRIPTION & OPERATION All 960 station wagon models use type 1041 rear axle assembly. All 960 4-door models use type 1045
CALIBRE 1387 R 13 Q CORH CORM
Description CALIBRE 1387 R 13 Q CORH CORM 3 jewels (13 x 15.15 x 2.3) 13.00 x 15.15 mm Movement height 2.30 mm Jewel number Frequency 3 32'768 A/h GENERAL DESCRIPTION A new design in quartz watches with
RONDA normtech 700 & Caliber 6004.B 11½''' Long battery-life and special functionality. Features. Product Specifications. Analog quartz movement
RONDA normtech 700 & 6000 Long battery-life and special functionality Caliber 6004.B 11½''' Product Specifications Features Analog quartz movement Repairable metal watch movement Line normtech Caliber
SECTION 9 CRANKING SYSTEM CONTENTS
SECTION 9 CRANKING SYSTEM CONTENTS 9-1. 9-2. 9-3. 9-4. 9-5. 9-6. 9-7. 9-8. GENERAL DESCRIPTION.,...,..., 9-2 SPECIFICATIONS.......................................... 9-4 LUBRICATION 9-5 REMOVAL AND INSTALLATION...
MAJOR REPAIR PRICES. Analogue $ Divers Analogue $ Analogue World Timer (2 movements) $ Digital $ Duo $188.
MAJOR REPAIR PRICES Major repair charges cover movement, service/repair or replacement including all parts* required, seals, battery and water resistant pressure test where applicable. (*Glass, dial, bezel,
Special Points. Specifications TRAIN SIDE DIAL SIDE. Scale 2V2:1
DAL SDE TRAN SDE Scale 2V2:1 Specifications 7% ligne, lever escapement Diameter of plate 17.20 mm. Total running time: 47 hours Screwless beryllium 21,600 beats per hour Adjustable stud holder balance
ADJUSTING THE TIME ADJUSTING THE DATE
manual Instructions for the use of the TW STEEL Models/ Canteen style hour hand Chronograph minute hand Chronograph second hand second hand (0) position button A minute hand 24-hour hand crowncap / normal
WARRANTY & WATCH CARE
WARRANTY & WATCH CARE WARRANTY & WATCH CARE CONTENT WARRANTY & user INSTRUCTIONS. Warranty Page 3 Instructions Model - 1968 - Chronograph Pages 5-9 Instructions Model - BOLT-68-3 Hands & GMT Pages 11-13
NEW ZEALAND RETAIL REPAIR PRICE LIST
Table of Contents BATTERY SUPPLY & FITTING... 1 WATER RESISTANT PRESSURE TEST... 1 MINOR SERVICE... 1 CASE REPAIRS... 2 GLASSES... 2 HANDS... 3 DIALS... 3 BAND REPAIRS... 3 ADDITIONAL LINKS FOR RETAIL
RETAIL REPAIR PRICE LIST
MAJOR REPAIR PRICES Major repair charges cover movement, service/repair or replacement including all parts* required, seals, battery and pressure test where applicable. *Glass, dial, bezel, case, band
CHAPTER 22 STARTER Models J05C-TD, J08C-TP and TR
1 INDEX STARTER 22-1 22-114E-03 CHAPTER 22 STARTER TROUBLESHOOTING...22-2 STARTER...22-4 22 22-2 STARTER 1 page 1 TROUBLESHOOTING Symptom Possible cause Remedy Engine does not crank, or cranks slowly Key
TABLE OF CONTENTS. Cordless Impact Driver. Model No. EY7542. Europe Oceania
Order Number PTD0707X38CE Cordless Impact Driver Model No. EY7542 Europe Oceania TABLE OF CONTENTS PAGE 1 Warning-------------------------------------------------------------- 2 2 Specifications -----------------------------------------------------
TIMEPIECES USER MANUAL
TIMEPIECES USER MANUAL Table of Contents Two Year Limited Warranty... 4 General Information: Water Resistance.... 6 Screw Down Crowns.... 7 Watches without a Calendar: Two Hand /Three Hand Models... 8
SERVICE MANUAL OF SERVOMOTORS HD/HR RANGE
SERVICE MANUAL HD/HR RANGE OF SERVOMOTORS ISSUE 2 WARNING Servomotors contain magnetic material which will attract metal particles. Care should be taken when dismantling motors to avoid this. All D.C.
All information contained in this booklet and referring to Series 245 includes ser. 246, unless otherwise noted. and French.
.'. All information contained in this booklet and referring to Series 245 includes ser. 246, unless otherwise noted. \ DAL SDE TRAN BRDGE SDE (ndicators Removed) (Magnetic Shield Removed) CALBER NO. Fig.
Synchronous Wired and Electronic Movement Manual
Synchronous Wired and Electronic Movement Manual Hanson Movement General Synchronous-wired and electronic secondaries are controlled by a Hansen movement. Except for a short correction cycle each hour,
M-4851-M8A SUPER 8.8 IRS MUSTANG AUTOMATIC PINION FLANGE KIT
Please visit fordperformanceracingparts.com for the most current instruction information!!! PLEASE READ ALL OF THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION. AT ANY TIME YOU DO NOT UNDERSTAND
CLUTCH. A-PDF Split DEMO : Purchase from to remove the watermark
ENGINE 3-43 A-PDF Split DEMO : Purchase from www.a-pdf.com to remove the watermark CLUTCH CLUTCH DRIVE AND DRIVEN PLATES Wipe off the engine oil from the drive and driven plates with a clean rag. Measure
DRIVE AXLES. Differentials & Axle Shafts - Corvette
DESCRIPTION & OPERATION 1998-99 DRIVE AXLES Differentials & Axle Shafts - Corvette A Getrag 625 model differential is used on both the automatic and manual transmissions. Differential carrier and case
PARTS MANUAL. RGD5000 Generator. Model. PUB-GP1204 Rev. 7/98
PARTS MANUAL Model RGD5000 Generator PUB-GP1204 Rev. 7/98 GROUP INDEX Group Name Page GENERATOR GROUP... 4 FRAME and FUEL TANK GROUP... 6 CONTROL BOX GROUP... 8 CRANKCASE GROUP... 12 CYLINDER and CYLINDER
4-50 BRAKES AND STEERING CLUTCHES
4-50 BRAKES AND STEERING CLUTCHES Disassembly of bevel gear crown WARNING Lift and handle all heavy items with a hoist of appropriate capacity. Make sure that all parts are held by appropriate slings and
Repair Manual and Spare Parts List
Hydraulic Drive Unit Type Techn. Doc. No. 362 and Accessories for Pipe Cutting Machine Darstellung kann vom Original abweichen Repair Manual and 580067000_Inst_en_Version_03 Repair General In general,
Press release. Patek Philippe Geneva October 2014
Press release Patek Philippe Geneva October 2014 Patek Philippe Multi-Scale Chronograph Refs. 5975 and 4675 The chronograph: a measuring instrument par excellence Chronographs for measuring time intervals
Printed from MediaCat
Illustration A Crankcase Illustration A Crankcase Ref.Nr. Item code Quantity Description 1 1106 020 2506 1 Crankcase (2) 2-11 2 0000 988 5217 1 Connector (2) 3 0000 988 5200 2 Connector (2) 4 1106 641
TABLE OF CONTENTS. Cordless Rotary Hammer Drill & Driver. Model No. EY7840. Europe and Oceania
Order Number PTD0803X31CE Cordless Rotary Hammer Drill & Driver Model No. EY7840 Europe and Oceania TABLE OF CONTENTS PAGE 1 Warning-------------------------------------------------------------- 2 2 Specifications
STARTER - HITACHI Isuzu Trooper II DESCRIPTION TESTING STARTER PERFORMANCE TESTS Starters HITACHI. Isuzu
STARTER - HITACHI 1986 Trooper II 1984 Starters HITACHI DESCRIPTION Starter is a conventional 12-volt, 4-pole brush-type motor, with direct or reduction gear drive. The starter-mounted solenoid shifts
Manual Transmission (M2S5,M3S5) General Troubleshooting... MTA - 2 Specification... MTA - 9
Manual Transmission (M2S5,M3S5) General Troubleshooting... MTA - 2 Specification... MTA - 9 Manual Transmission Description and Operation... MTA - 13 Components... MTA - 19 Inspection... MTA - 20 Removal...
Instruction Manual LA-SDO1 Sectional garage door opener
Instruction Manual LA-SDO1 Sectional garage door opener INSTALLATION INSTRUCTIONS OWNERS COPY 1 WARNING: It is vital for the safety of persons to follow all instructions. Failure to comply with the installation
Pneumatic-Pneumatic Positioner YT-1200L,R Installation manual
Installation Safety Warning When installing a positioned, please ensure to read and follow safety instruction. All input and supply pressure to valve, actuator, and other related devices must be turned
Thickness Gages SERIES 547, 7
Technical ata Function of igital Models IS Types ON/OFF / mm onversion Origin ±irection hangeover SP Output attery Life: 20,000 hrs Power Supply: Silver Oxide ell (SR-44 1pc.) I Types ON/OFF / mm onversion
Repair Manual and Spare Parts List
Pneumatic Drive Unit Type Techn. Doc. No. 352 and Accessories for Pipe Cutting Machine Darstellung kann vom Original abweichen Repair Manual and 580027000_Inst_en_Version_02 Repair General In general,
PREFACE. Combined with all the specialty and advantages of the same models from both domestic and abroad, 1P55FMJ is
PREFACE Combined with all the specialty and advantages of the same models from both domestic and abroad, PFMJ is one of the newly engines developed by our Co. It is characterized by strong power, low fuel-consumption
Installation- Linear. I & M Mark 17X Series. Mark 17X Linear Installation
I & M Mark 17X Series 3170 Wasson Road Cincinnati, OH 45209 Phone 513.533.5600 Fax 513.871.0105 (f) info@richardsind.com www.jordanvalve.com Installation & Maintenance Instructions for the Mark 17X Series