TECHNICAL SPECIFICATIONS OF THE SPLIT SECONDS CHRONOGRAPH RICHARD MILLE RM 004-V2 FELIPE MASSA
|
|
- Malcolm Patrick
- 6 years ago
- Views:
Transcription
1
2 TECHNICAL SPECIFICATIONS OF THE SPLIT SECONDS CHRONOGRAPH RICHARD MILLE RM 004-V2 FELIPE MASSA Following the success of the RM 005 in 2006 and the RM 011 in 2007, the RM 004 is the latest model to carry the name of the Formula 1 driver, Felipe Massa, who test drives all Richard Mille watches. The RM 004 Felipe Massa has a baseplate in carbon nanofiber, split second chronograph and bears the colours of the Brazilian flag on its inner bezel and a red crown. Limited edition of 25 pieces in red gold, 10 in white gold and 5 in titanium. CALIBER RM 004-V2 FELIPE MASSA: manual winding movement with hours, minutes, chronograph, split seconds, power reserve, torque indicator, function indicator. Dimensions: length 48 mm x mm (widest point) x mm (thickest area). MAIN FEATURES (MANY OF WHICH ARE MAJOR TECHNICAL INNOVATIONS) CARBON NANOFIBER BASEPLATE This is an isotropic composite material created from carbon nanofibers molded under a high pressure of 7,500 N/cm 2 and a temperature of 2,000 C, resulting in a material with high mechanical, physical and chemical stability in all directions. The ribbed perimeter of the movement baseplate assures the highest rigidity between the plate and bridges. Carbon nanofiber composite structures such as this are amorphous, chemically neutral and dimensionally constant within a very wide range of operating temperatures, including those outside of normal ranges. This stability assures the highest integrity of the movement s going train under all conditions. POWER RESERVE Circa 50 hours (numerical indications to the left of the barrel). CHRONOGRAPH (Column wheel in titanium) The modern architecture of this movement has allowed for the consistent and rational arrangement of its constituent parts, avoiding unnecessary superimpositions and permitting the best possible use of the functions with technical solutions. For example, research was conducted into the geometric design of the column wheel that controls the different levers to ensure perfect, long-term, stable and simultaneous functioning of the chronograph mechanism, a feature that is essential for a high performance chronometer. Operation: the chronograph function is stopped and started via the pusher located on the lower left at 8 o clock. The hands are reset by pressing another pusher located on the upper left at 10 o clock. SPLIT SECONDS MECHANISM WITH IMPROVED PERFORMANCE One of the new characteristics developed for the RM 004-V2 Felipe Massa is the virtually complete elimination of initial jumping in the chronograph seconds hand. A great number of studies led to the design and manufacture of gear wheels and levers in titanium, thus reducing inertia. Moreover, the development of a new generation of split seconds components meant that energy consumption of this function could be lowered by approximately 50 % through the reduction of friction on the spindle, and the chronograph hands jumping when stopping is virtually eliminated. This was achieved by research that focused on the working of the split seconds arms. Operation: By depressing the pusher on the right (at 4 o clock), the user can stop the split second hand in order to read an intermediate time while the chronograph is engaged. Pressing the pusher again allows the split seconds hand to rejoin the chronograph, ready for the next measurement. 1
3
4 RM 004-V2 FELIPE MASSA TORQUE INDICATOR Supplies information about the mainspring s tension, thus permitting the optimalization of the chronometric functioning of the movement. Below 53 dnmm, the spring is considered to be too slack, while above 65 dnmm, the excessive spring tension can adversely affect the mechanism s operation, or else actually endanger it. These indications appear on the numerical zone to the right of the barrel. FUNCTION INDICATOR In a manner similar to a car's gearbox, the function indicator allows one to see the winding, neutral and hand setting positions as the crown is pulled out. Each position is indicated via a hand at 4 o clock displaying the following functions: W(Winding) N(Neutral) H(Hands). BALANCE WHEEL WITH VARIABLE INERTIA This type of balance wheel, which represents the ultimate in innovation, guarantees greater reliability when subjected to shock and also during assembly and dismantling of the movement, thus achieving better chronometric results over time. The index is eliminated, thereby allowing a more precise and repeatable adjustment. FAST ROTATING BARREL (6 hours per revolution instead of 7,5 hours) This type of barrel provides the following advantages: - The phenomenon of periodic internal mainspring adhesion is significantly diminished, thereby increasing performance, - Provision of an excellent mainspring delta curve with an ideal power reserve/performance and regularity ratio. BARREL PAWL WITH PROGRESSIVE RECOIL This device permits an appreciable winding gain (circa 20 %), especially during the start of winding. It also aids in the even distribution of the mainspring s internal tension. BALANCE SPRING In order to improve performance, lengthy research was carried out to determine a special curve of the hairspring, aimed at reducing the shifting of the centre of gravity during functioning. ESCAPEMENT New in-line escapement design, aimed at reducing friction. MODULAR TIME SETTING MECHANISM FITTED AGAINST THE CASE BACK Provides the following advantages for longevity and maintenance: - Since the component is mounted outside of the movement, the time setting assembly can be changed without affecting the integrity of the bottom plate in the event of a possible defect or during maintenance, - The mounting and dismantling of this module from the back will not require the removal of the hands and the dial. 2
5
6 RM 004-V2 FELIPE MASSA CLOSURE OF THE BARREL COVER USING EXCENTRIC SCREWS This development is again part of the intention to make servicing easy, logical, and of a very high mechanical standard. TORQUE LIMITING CROWN This added security system prevents accidental overwinding of the watch, the result of which can cause damage such as breaking the winding stem or putting too much pressure on the barrel spring. SPLINE SCREWS IN GRADE 5 TITANIUM FOR THE BRIDGES AND CASE This permits better control of the torque applied to the screws during assembly. These screws are therefore unaffected by physical manipulation during assembly or disassembly and age well. TOOTH SYSTEM OF BARREL AND THIRD-WHEEL PINION WITH CENTRAL INVOLUTE PROFILE The wheel with a central developing profile and a pressure angle of 20 promotes rolling movement more effectively, compensates differences between centers, ensures excellent torque transmission and a distinct improvement in performance. OTHER FEATURES - Center bridge in titanium - Movement dimensions: mm x mm - Thickness: 7.67 mm - Diameter of the balance wheel: 10 mm - Number of jewels: 31 - Balance wheel: GLUCYDUR, 2 arms, 4 adjusting screws - Moment of inertia: mg.cm 2, lever angle 53 - Frequency: 21,600 vph (3 Hz) - Balance spring: ELINVAR by Nivarox - Shock resistance: KIF Elastor KE 160 B28 - Barrel shaft: Steel sandwich, 20 AP 3
7
8 RM 004-V2 FELIPE MASSA FINISHING MOVEMENT - Anglage and polishing by hand - Locking sections hand polished - Sapphire blasted milled sections - Lapped and polished contact points - Burnished pivots STEEL PARTS - Sapphire blasted surfaces - Anglage and polishing by hand GEAR WHEELS - Concave chamfering with a diamond tool - Circular finished faces - Gilded (before cutting the teeth) - Minimum correction applied to the wheels in order to preserve geometry and performance 4
Dimensions: Length 45 mm x mm (widest point) x mm (thickest area)
TECHNICAL SPECIFICATIONS OF THE RICHARD MILLE TOURBILLON RM 014 PERINI NAVI CUP Inspired by the extraordinary sailing vessels of the yacht builders Perini Navi of Viareggio, Italy, the RM 014-1 echoes
More informationThe chronograph calibres CHRO PC 17 jewels CHRO C12 PC 17 jewels CHRO C12 PC AMPM GMT 17 jewels CHRO PC CAL 17 jewels
Technical guide The chronograph calibres 860 27 CHRO PC 17 jewels 861 27 CHRO C12 PC 17 jewels 910 27 CHRO C12 PC AMPM GMT 17 jewels 930 27 CHRO PC CAL 17 jewels o 27.00 mm / Power-reserve Jewel number
More informationautomatic, with center sweep-second automatic, calendar with center sweep-second automatic, day and date with center sweep-second
DIAL SIDE TRAIN SIDE Scale 1:1 Specifications Movement Automatic mechanism 11112 Ligne, lever escapement Diameter of the plate 25.60 mm Unbreakable and self-lubricated mainspring Total running time: 42
More informationBULOVA MODELS. Specifications. Designation of Types. 11 AOAC 11 AOACB Automatic 11 AOACD. Date. Movement DIAL SIDE TRAIN SIDE.
DIAL SIDE TRAIN SIDE BULOVA MODELS 11 AOAC 11 AOACB 11 AOACD Date Day + Date Scale 1:1 Specifications Movement 11y,'" Lever escapement 17 or 23 jewels Unbreakable and self-lubricated mainspring Total running
More informationSpecific information for calibre 3603
Fig. 1.0 1.0 Assembling of date indication 1. Stem in position 3 : Turn anti-clockwise the driving wheel for date unlocking yoke (reference 33029) until the finger of this wheel is aligned with the pin,
More informationCalibre General information for Calibre Exploded views for calibre Specific information for calibre
Technical Guide TG-19-C-024-E C Produced by : pelrom Date: 20.09.2010 3 Modifications: see last page CALIBRE 3220 Version A 131/4 Ø 30 mm Height on movement Power reserve Number of jewels Frequency Lift
More informationSpecial Points. Specifications TRAIN SIDE DIAL SIDE. Scale 2V2:1
DAL SDE TRAN SDE Scale 2V2:1 Specifications 7% ligne, lever escapement Diameter of plate 17.20 mm. Total running time: 47 hours Screwless beryllium 21,600 beats per hour Adjustable stud holder balance
More informationPARTS LIST / TECHNICAL GUIDE Perpetual Calendar/Alarm Chronograph Cal. 7T86A
PARTS LIST / TECHNICAL GUIDE Perpetual Calendar/Alarm Chronograph [SPECIFICATIONS] Item Cal. No. Movement 7T86A 7T86A 3 hands (hour, minute, and small second hands) Interval of hands movements Driving
More informationTRADITION INDEPENDENT CHRONOGRAPH 7077 HISTORY IS STILL BEING WRITTEN...
TRADITION INDEPENDENT CHRONOGRAPH 7077 HISTORY IS STILL BEING WRITTEN... TRADITION INDEPENDENT CHRONOGRAPH 7077 HISTORY IS STILL BEING WRITTEN... THE INDEPENDENT CHRONOGRAPH 7077 IS EQUIPPED WITH TWO
More informationPARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE [SPECIFICATIONS] Item Cal. No. 6T63A 3 hands (hour, minute, and small second hand) 24-hour indicator Date indicator Diameter Outside: Ø 30.8 mm Height: 5.1 mm Casing:
More informationServicing a Poljot 3133 movement
Servicing a Poljot 3133 movement A service guide made by WUS member SLLS, June 2015 Editor: WUS member Polmax3133 Use this guide at your own risk. To dismantle a 3133 movement, just start at the end of
More informationTECHNICAL GUIDE PARTS CATALOGUE. Cal.NE20 AUTOMATIC MECHANICAL. SII Products
TECHNICAL GUIDE & PARTS CATALOGUE AUTOMATIC MECHANICAL [SPECIFICATION] Item PARTS CATALOGUE / TECHNICAL GUIDE Version-01 NE20 Cal. No. Movement Movement size Time indication Basic function Frequency Accuracy
More informationTECHNICAL GUIDE PARTS CATALOGUE. Cal.NE15 AUTOMATIC MECHANICAL. SII Products
TECHNICAL GUIDE & PARTS CATALOGUE AUTOMATIC MECHANICAL [SPECIFICATION] Item PARTS CATALOGUE / TECHNICAL GUIDE Version-01 NE15 Cal. No. Movement Movement size Time indication Basic function Frequency Accuracy
More informationPARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE [SPECIFICATIONS] Item Movement Cal. No. Cal. 5T82A 5T82A (x 1.0) Movement size Time indication Driving system Outside diameter Casing diameter Height (Movement intervals)
More informationPARTS LIST / TECHNICAL GUIDE ANALOGUE SOLAR Cal. V175A [SPECIFICATIONS]
PARTS LIST / TECHNICAL GUIDE ANALOGUE SOLAR [SPECIFICATIONS] Item Cal. No. V175A 3 hands (hour, minute and small second hands), 24-hour indicator Diameter: Height: Outside 27.6 mm.casing 27.0 mm 4.4 mm
More informationPARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE [SPECIFICATIONS] Item Movement Cal. No. 3M62A (x 1.0) Movement size Outside diameter Casing diameter Height ø24.0 mm ø23.3 mm 4.2 mm Time indication Driving system Additional
More informationPARTS CATALOGUE / TECHNICAL GUIDE Cal.NE57A Version-01 NE57A [SPECIFICATION] Cal. No. Item. Movement. Outside diameter. Movement size.
[SPECIFICATION] Item PARTS CATALOGUE / TECHNICAL GUIDE NE57A Cal. No. Movement Movement size Time indication Basic function Frequency Accuracy Duration time Outside diameter Static accuracy Winding the
More informationOverseas is the new black
Overseas is the new black A new dial colour A powerful and refined style Two versions: self-winding and chronograph Twenty years ago, Vacheron Constantin had made its Overseas watch the symbol of watchmaking
More informationRevised on : 07. Feb TECHNICAL GUIDE PARTS CATALOGUE. Cal.NE15C AUTOMATIC MECHANICAL. SII Products
Revised on : 07. Feb. 2018 TECHNICAL GUIDE & PARTS CATALOGUE AUTOMATIC MECHANICAL SII Products [SPECIFICATION] Item PARTS CATALOGUE / TECHNICAL GUIDE Version-02 NE15C Cal. No. Movement Movement size Time
More informationRevised on : 23. May TECHNICAL GUIDE PARTS CATALOGUE. Cal.NH70/71 AUTOMATIC MECHANICAL. SII Products
Revised on : 23. May. 2018 TECHNICAL GUIDE & PARTS CATALOGUE AUTOMATIC MECHANICAL SII Products [SPECIFICATION] PARTS CATALOGUE / TECHNICAL GUIDE NH70 - NH71 Gilt version of NH70 Movement Movement size
More informationPARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE PARTS CATALOGUE / TECHNICAL GUIDE (p. 1 21) CATÁLOGO DE PARTES / GUÍA TÉCNICA (p. 23 43) [SPECIFICATIONS] Item Movement Cal. No. 5J22A (x 1.0) Movement size Outside diameter
More informationPARTS LIST/ TECHNICAL GUIDE
/ TECHNICAL GUIDE Cal. 7S26C/7S36C [SPECIFICATIONS] Item Cal. No. 7S26C 7S36C 5 4 28 29 3 2 1 31 30 3 hands (hour, minute and second hands) Date indication Day indication Movement size Diameter Outside:
More informationAn idea endures three centuries for a reason. Still, that doesn t mean you can t improve it. Mirrored Force Resonance
THE WORLD S FIRST An idea endures three centuries for a reason. Still, that doesn t mean you can t improve it. Mirrored Force Resonance Resonance is a sophisticated and demanding horological technique.
More informationPARTS LIST / TECHNICAL GUIDE
PARTS LIST / ANALOGUE SOLAR [SPECIFICATIONS] Item Cal. No. V172A/V174A V172A V174A 3 hands (hour, minute and small second hands) 3 hands (hour, minute and small second hands), 24-hour indicator Diameter:
More informationCaution for disassembling The hour wheel is made of engineering plastics. When pulling out the hour hand, take care not to damage the hour wheel.
III. REMRKS ON DISSSEMLING ND RESSEMLING Hands Dial Caution for disassembling The hour wheel is made of engineering plastics. When pulling out the hour hand, take care not to damage the hour wheel. How
More informationPress release. Baselworld Patek Philippe, Geneva March 2010
Press release Baselworld 2010 Patek Philippe, Geneva March 2010 Patek Philippe split-seconds chronograph Ref. 5950A Steel in its most stately manifestation With its new Ref. 5950A split-seconds chronograph,
More informationJACOB & CO. TWIN TURBO TWIN TRIPLE AXIS TOURBILLON MINUTE REPEATER PRESS RELEASE
JACOB & CO. TWIN TURBO TWIN TRIPLE AXIS TOURBILLON MINUTE REPEATER PRESS RELEASE JACOB & CO. TWIN TURBO TWIN TRIPLE AXIS TOURBILLON MINUTE REPEATER A Feat of Time Originally founded in 1986 in New York
More informationPARTS LIST / TECHNICAL GUIDE
[SPECIFICATIONS] PARTS LIST / TECHNICAL GUIDE Automatic Item Cal. No. 4R35B/4R36A The figures below are Cal. 4R36A. 3 hands (hour, minute and second hands) Day and Date indication Movement size Diameter
More informationPARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE PARTS CATALOGUE / TECHNICAL GUIDE (p. 1 22) [SPECIFICATIONS] Item Movement Cal. No. 5J32A (x 1.0) Movement size Outside diameter Casing diameter ø26.4 mm ø25.6 mm Height
More informationPARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE [SPECIFICATIONS] Item Movement Cal. No. Cal. 7T84A 7T84A (x 1.0) Movement size Time indication Driving system Outside diameter Casing diameter Height Additional mechanism
More informationCALIBRE Q SCS CAL CORH CORM CORS 7 jewels Description et performances
Technical guide CALIBRE 1370 25.60 Q SCS CAL CORH CORM CORS 7 jewels Description et performances The caliber 1370, destined for a man's electronic watch with analogical display, is fitted with a quartz
More informationJACOB & CO. EPIC X CHRONO PRESS RELEASE
JACOB & CO. EPIC X CHRONO PRESS RELEASE EPIC X CHRONO Launched at Baselworld 2013, the Epic X line from Jacob & Co. became synonymous with a sportive and active lifestyle. Now in 2017, it has been integrated
More informationPARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE [SPECIFICATIONS] Item Movement Cal. No. V653B Movement size Outside diameter Casing diameter Height ø29.5 mm 26.0 mm between 3 o clock and 9 o clock sides ø28.8 mm 3.7
More informationPARTS LIST / TECHNICAL GUIDE Automatic Cal.4R71A
[SPECIFICATION] Item PARTS LIST / TECHNICAL GUIDE Automatic Cal.4R71A Cal. No. 4R71A 3 Hands (Hour, Minute and Second hands) Movement Size Diameter Outside : φ27.4 mm Casing : φ27.0 mm Height : 5.32 mm
More informationporsche design Timepieces CHRONOTIMER COLLECTION
porsche design Timepieces CHRONOTIMER COLLECTION Early 1970s. A revolution in the cockpit. Matte black dashboard instruments with white hands for optimal readability without light reflections. The inspiration
More informationLAPPING OR GRINDING? WHICH TECHNOLOGY IS THE RIGHT CHOICE IN THE AGE OF INDUSTRY 4.0?
LAPPING OR GRINDING? WHICH TECHNOLOGY IS THE RIGHT CHOICE IN THE AGE OF INDUSTRY 4.0? Bevel gear transmissions for the automotive industry are subject to extremely stringent requirements. They must be
More information7D** Technical Instruction No.1
Assembling the switching unit Set the main plate. 91 Set the main plate. 90 89 88 87 86 85 84 Set the lead pin for RZ1. Set the hour and minute stator. Set the second stator. Set the generating stator.
More informationMAAG TM LGD lateral gear drive for horizontal mills
MAAG TM LGD lateral gear drive for horizontal mills 2 Our Quality Policy FLSmidth MAAG Gear is committed to creating long lasting relationships that establish us as a trustworthy, reliable and professional
More informationPARTS CATALOGUE / TECHNICAL GUIDE
PRTS CTLOGUE / TECHNICL GUIDE [SPECIFICTIONS] Cal. 7T62/7T92/7T94 Item Cal. No. 7T62 7T92 7T94 Movement The illustrations refer to Cal. 7T62. (x 1.0) Movement size Outside diameter Casing diameter Ø 27.6
More informationPARTS CATALOGUE / TECHNICAL GUIDE
PRTS CTLOGUE / TECHNICL GUIDE Cal. 7T62, 7T92 [SPECIFICTIONS] Item Cal. No. 7T62 7T92 Movement The illustrations refer to Cal. 7T62. (x 1.0) Movement size Outside diameter Casing diameter ø27.6 mm ø27.0
More informationFR Gearing. Total Motion Control. Harmonic Drive gear
FR Gearing Total Motion Control Harmonic Drive gear P r e c i s i o n G e a r i n g a n d M o t i o n Control Contents The Basic Assembly...2 Configurations...3 Ordering Information...3 Typical Applications...4
More informationPARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE [SPECIFICATIONS] Brand SEIKO Item Cal. No. 7S26B 7S36B Movement Movement size Outside diameter Casing diameter Height (x 1.5) Ø 27.4 mm Ø 27.0 mm 4.9 mm Time indication
More informationTable of ConTenTs. Analog Chronographs 1/1 of a Second - Type C with small chronograph seconds and 24-hour hands 15
Table of ConTenTs 2- and 3-Hand Models 1 Date/Big Date Display Models - Type A 2 Date/Big Date Display Models - Type B 3 Automatic Models 4 Multi-Eye Models 5 Multi-Eye Models with Retrograde Day/Date
More informationBEARING GUIDE. Bearing Guide Created by REV Robotics 2016, Licensed Under CC BY-SA 1
fg BEARING GUIDE This guide is intended as a reference on how to build with the new REV Robotics 15mm Building System using bearings and brackets to achieve basic motion. Bearing Guide Created by REV Robotics
More informationROLL-UP COVERS. Special Product: SURE-SPRING.
Special Product: SURE-SPRING The P.E.I. Patented design known as SURE-SPRING represent the most advanced level of technical innovation in the field of roll-up covers. The spring mechanism design takes
More informationDEPARTMENT OF MECHANICAL ENGINEERING Subject code: ME6601 Subject Name: DESIGN OF TRANSMISSION SYSTEMS UNIT-I DESIGN OF TRANSMISSION SYSTEMS FOR FLEXIBLE ELEMENTS 1. What is the effect of centre distance
More informationHopkinsons Fig 9052 VALVE ACTUATOR
Excellent Power & Industrial Solutions Standard Operating & Maintenance Instructions Hopkinsons Fig 9052 VALVE ACTUATOR CUT-AWAY OF FIG. 9052 GEAR BOX, WITH LIMIT SWITCH & VALVE POSITION INDICATOR HOP
More informationRETAIL REPAIR PRICE LIST
MAJOR REPAIR PRICES Major repair charges cover movement, service/repair or replacement including all parts* required, seals, battery and pressure test where applicable. *Glass, dial, bezel, case, band
More informationPARTS CATALOGUE/TECHNICAL GUIDE Cal. 7D46A, 7D48A
PARTS CATALOGUE/TECHNICAL GUIDE Cal. 7D46A, 7D48A SPECIFICATIONS Item Cal. No. 7D46A, 7D48A Movement Movement Outside diameter size Casing diameter Height Time indication (Movement intervals) Driving system
More informationCal.5D22A TECHNICAL GUIDE
No. PROCESS ILLUSTRATIONS AND SPECIAL INSTRUCTIONS ETC. Mount the secondary battery unit. Mount the insulator for secondary battery. Mount the secondary battery guard. Fix the insulator for secondary battery
More informationRevised on : 25 November 2014 TECHNICAL GUIDE PARTS CATALOGUE. Cal.VC00/01E ANALOGUE QUARTZ. SII Products
Revised on : 25 November 2014 TECHNICAL GUIDE & PARTS CATALOGUE ANALOGUE QUARTZ PARTS CATALOGUE / TECHNICAL GUIDE Cal.VC00 / 01E [SPECIFICATION] Item Cal. No. VC00E VC01E Version-01 Movement Movement size
More informationNEW ZEALAND RETAIL REPAIR PRICE LIST
Table of Contents BATTERY SUPPLY & FITTING... 1 WATER RESISTANT PRESSURE TEST... 1 MINOR SERVICE... 1 CASE REPAIRS... 2 GLASSES... 2 HANDS... 3 DIALS... 3 BAND REPAIRS... 3 ADDITIONAL LINKS FOR RETAIL
More informationCal. VS75A SOLAR SERIES. 4.40mm. Approx. 6 months. Ø 27.0mm. Watch Movement Specification and Drawing. Movement Size. Casing Diameter.
Watch Movement Specification and Drawing SOLAR SERIES Cal. VS75A Movement Size 12 Casing Diameter Ø 27.0mm Height 4.40mm Running Time Approx. 6 months Cal. VS75A Date: 1/Sep./'15 Items Rev. Page Features
More informationMAJOR REPAIR PRICES. Analogue $ Divers Analogue $ Analogue World Timer (2 movements) $ Digital $ Duo $188.
MAJOR REPAIR PRICES Major repair charges cover movement, service/repair or replacement including all parts* required, seals, battery and water resistant pressure test where applicable. (*Glass, dial, bezel,
More informationPARTS LIST /TECHNICAL GUIDE ANALOGUE SOLAR Cal. V157A/V158A [SPECIFICATIONS]
PARTS LIST /TECHNICAL GUIDE ANALOGUE SOLAR [SPECIFICATIONS] Cal. No. Item V157A V157A/V158A Movement V158A Diameter Outside: 28.6 mm Casing: 24.0 mm Height: 3.5mm 3 hands (hour, minute and second hands)
More informationThe sphere roller Less is more!
The sphere roller Less is more! Heinrich Hofmann Rainer Eidloth Dr. Robert Plank Gottfried Ruoff 109 8 The sphere roller Introduction Wheel supported by balls It started with the point, then along came
More information6-speed manual gearbox 0A5
Service Training Self-study programme 320 6-speed manual gearbox 0A5 Design and function S320_002 In addition to meeting increasing technical demands, modern cars also have to represent effective space
More informationSimple Gears and Transmission
Simple Gears and Transmission Contents How can transmissions be designed so that they provide the force, speed and direction required and how efficient will the design be? Initial Problem Statement 2 Narrative
More informationCal. VR43A SOLAR SERIES 13 1/ mm. Approx. 4 months. Ø 30.6mm. Watch Movement Specification and Drawing. Movement Size. Casing Diameter.
Watch Movement Specification and Drawing SOLAR SERIES Cal. VR43A Movement Size 13 1/2 Casing Diameter Ø 30.6mm Height 4.52mm Running Time Approx. 4 months Date: 30/Nov./'17 Cal. VR43A Items Rev. Page Features
More informationFinal drive gear set, recommended sequence for adjusting
Page 1 of 31 39-148 Final drive gear set, recommended sequence for adjusting If the pinion shaft and ring gear have to be readjusted, the following sequence is recommended for maximum efficiency: 1.) Determine
More informationTE 73 TWO ROLLER MACHINE
TE 73 TWO ROLLER MACHINE Background The TE 73 family of machines dates back to original Plint and Partners Ltd designs from the 1960s. These machines are all to the overhung roller design in which test
More informationSingleTech. SingleTech Solus Specifications. SingleTech Engineering
Solus Specifications Body and Wheel Centers Material chosen for light-weight, high load capacity, resistance to abuse, electrical safety and finish characteristics. Body consists of two pressure-diecast
More information2. Uncasing. 5. Remove the clamp screws (casing ring / middle and movement / casing ring) and the clamps. 6. Remove the casing ring.
Calibre 360 1. Presentation 2. Uncasing 3. Chronograph movement (module) / M2 replacement procedure 4. Overhauling the base movement 5. Assembling the base movement with the chronograph movement 6. Chronograph
More informationStopping Accuracy of Brushless
Stopping Accuracy of Brushless Features of the High Rigidity Type DGII Series Hollow Rotary Actuator The DGII Series hollow rotary actuator was developed for positioning applications such as rotating a
More informationHopkinsons Fig 9051 VALVE ACTUATOR
Excellent Power & Industrial Solutions Standard Operating & Maintenance Instructions Hopkinsons Fig 9051 VALVE ACTUATOR TERMINAL BOX TERMINAL BOX COVER SPINDLE COVER SEAL BEARING HOUSING MOTOR TAPERED
More informationVISIT ROLEX.COM AND EXPLORE MORE
No other watch is engineered quite like a Rolex. The GMT-Master, introduced in 1955, was developed in collaboration with Pan Am to meet the needs of their international pilots. The GMT-Master II has proved
More informationThe new mechanical Hi-beat 36,000 GMT
March 27, 2014 The new mechanical Hi-beat 36,000 GMT Seiko Watch Corporation is pleased to announce the global launch of a new caliber, its first ever hi-beat GMT. Caliber 9S86 has been created on the
More informationTips & Technology For Bosch business partners
Tips & Technology For Bosch business partners Current topics for successful workshops No. 05 Trucks Starters and starter systems Part 1 Requirements and functions Internal combustion engines must be cranked
More informationPRICE LIST CUSTOMER SERVICE VALID AS PER JANUARY 1 ST, 2018 RECOMMENDED PUBLIC PRICES IN SEK
PRICE LIST CUSTOMER SERVICE VALID AS PER JANUARY 1 ST, 2018 RECOMMENDED PUBLIC PRICES IN SEK OMEGA SERVICES WHY YOUR WATCH NEEDS THE BEST CARE Your OMEGA watch was conceived to stand the test of time.
More informationside operation magnet ideal transmission side operation magnet
1 2 3 side operation magnet ideal transmission side operation magnet 4 5 6 The ScreenLine SL20P system comprises a venetian blind incorporating a 12,5 mm slat designed to be integrated in a doubleglazing
More informationUniflex-stow remote valve operating systems SafeOperator - Commercial range
Mini Flexible Gear Drive System 1 Welcome to Uniflex-stow remote mechanical valve operators. Our range is the most comprehensive solution for the remote operation of valves in every industry available
More informationRevised on : 9. Mar TECHNICAL GUIDE PARTS CATALOGUE. Cal.VJ20C Cal.VJ21C ANALOGUE QUARTZ. SII Products
Revised on : 9. Mar. 2016 TECHNICAL GUIDE & PARTS CATALOGUE Cal.VJ20C Cal.VJ21C ANALOGUE QUARTZ [SPECIFICATION] Item PARTS CATALOGUE / TECHNICAL GUIDE Cal. No. VJ20C VJ21C VJ20C VJ21C Version-02 Movement
More informationTapered Roller Bearings. Reliable energy efficient suitable for high loads
Tapered Roller Bearings Reliable energy efficient suitable for high loads Tapered roller bearings a premium product from FAG Tapered roller bearings are characterized by high radial and axial load carrying
More informationCal. AS32A SOLAR SERIES 10 1/ mm. Approx. 4 months. Ø 23.3mm. Watch Movement Specification and Drawing. Movement Size. Casing Diameter.
Watch Movement Specification and Drawing SOLAR SERIES Cal. AS32A Movement Size 10 1/2 Casing Diameter Ø 23.3mm Height 4.61mm Running Time Approx. 4 months Date: 31/Oct./'16 Cal. AS32A Items Rev. Page Features
More informationUNIT -I. Ans: They are specified by the no. of strands & the no. of wires in each strand.
VETRI VINAYAHA COLLEGE OF ENGINEERING AND TECHNOLOGY, THOTTIAM, NAMAKKAL-621215. DEPARTMENT OF MECHANICAL ENGINEERING SIXTH SEMESTER / III YEAR ME6601 DESIGN OF TRANSMISSION SYSTEM (Regulation-2013) UNIT
More informationTel: +44 (0) Fax: +44 (0)
1 About Ridgway Machines Our Mission Ridgway are the leading manufacturer of precision taping and winding machines for the electrical and energy industries, with over 95 years engineering experience. Ridgway
More informationFREE STANDING WORK STATION JIB CRANE
SECTION 14661 FREE STANDING WORK STATION JIB CRANE ***** Gorbel, Inc. manufacturers a broad range of material handling cranes including monorail, bridge, gantry, and jib cranes. Numerous work station and
More informationSelf-Adjusting Clutch (SAC) Technology Special tools / User instructions
Self-Adjusting Clutch (SAC) Technology Special tools / User instructions The content of this brochure shall not be legally binding and is for information purposes only. To the extent legally permissible,
More informationNabtesco Reducers Introduction
NMCE13029 2013/9/25 Nabtesco Reducers Introduction Nabtesco gear reducers are cycloidal drives, designed for use in high load, precision, extreme bending moment, and any other application were positioning
More informationKaydon white paper. Slewing bearing selection, simplified. an SKF Group brand. by Jeff Lauber, engineering specialist
Slewing bearing selection, simplified by Jeff Lauber, engineering specialist an SKF Group brand Selecting the right slewing bearing Slewing bearings are typically used in applications where their ability
More informationKISSsoft 03/2017 Tutorial 15
KISSsoft 03/2017 Tutorial 15 Bevel gears KISSsoft AG Rosengartenstrasse 4 8608 Bubikon Switzerland Tel: +41 55 254 20 50 Fax: +41 55 254 20 51 info@kisssoft.ag www.kisssoft.ag Contents 1 Starting KISSsoft...
More informationVR-Design Studio Car Physics Engine
VR-Design Studio Car Physics Engine Contents Introduction I General I.1 Model I.2 General physics I.3 Introduction to the force created by the wheels II The Engine II.1 Engine RPM II.2 Engine Torque II.3
More informationPower Transmission Solutions
RINGFEDER Products are available from MARYLAND METRICS Power Transmission Solutions 11 2011 Partners for performance RINGFEDER Products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD
More informationPARTS LIST / TECHNICAL GUIDE
PARTS LIST / TECHNICAL GUIDE Analogue Solar [SPECIFICATIONS] Item Cal. No. V114A 2 hands (hour, minute hands) Diameter Outside: Ø 15.5 mm x 11.8 mm Casing: Ø 15.15 mm x 11.80 mm Height: Ø 2.0 mm Interval
More informationFB Gearing. Total Motion Control. Harmonic Drive gear
FB Gearing Total Motion Control Harmonic Drive gear P r e c i s i o n G e a r i n g a n d M o t i o n Control Contents Compact, High Ratio, In-Line Gearing...2 The Basic Component Set...2 Configuration...3
More informationME6601 DESIGN OF TRANSMISSION SYSTEMS
SYED AMMAL ENGINEERING COLLEGE (Approved by the AICTE, New Delhi, Govt. of Tamilnadu and Affiliated to Anna University, Chennai) Established in 1998 - An ISO 9001:2008 Certified Institution Dr. E.M.Abdullah
More informationCal. VS17A SOLAR SERIES 5 1/ mm. 2.79mm. Approx. 6 months. Watch Movement Specification and Drawing. Movement Size.
Watch Movement Specification and Drawing SOLAR SERIES Cal. VS17A Movement Size 5 1/2 Casing Diameter 11.8 15.15 mm Height 2.79mm Running Time Approx. 6 months Date: 31/Aug/'17 Cal. VS17A Items Rev. Page
More informationMoments. It doesn t fall because of the presence of a counter balance weight on the right-hand side. The boom is therefore balanced.
Moments The crane in the image below looks unstable, as though it should topple over. There appears to be too much of the boom on the left-hand side of the tower. It doesn t fall because of the presence
More informationCARD RECORDER MECHANISMS
ITR Engineering Data Sheet 201 September 1927 CARD RECORDER MECHANISMS Card time recorders are used for registering on a card the time that employees enter and leave the factory. The card and the recorder
More informationPARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE [SPECIFICATIONS] Item Movement Cal. No. Cal. 7N3C Cal. 7N33C Cal. 7N39C 7N3C 7N33C 7N39C Outside diameter The illustrations refer to Cal. 7N33C. ø4.0 mm 1.5 mm between
More informationmood collection DESIGN MATERIALS COLOURS INDEPENDENCE &... AN ANNIVERSARY
mood collection DESIGN MATERIALS COLOURS INDEPENDENCE &... AN ANNIVERSARY THE VANTAGE OF VINTAGE A travel through time, in the world of the first and iconic Chronofighter. The Chronofighter timepieces
More informationHDUF Gearing. Total Motion Control. Precision Gearing & Motion
HDUF Gearing Total Motion Control Precision Gearing & Motion Control Contents Compact, High Ratio, In-Line Gearing...2 The Basic Component Set...2 Configuration...3 Typical Installation...3 Ordering Information...3
More informationYour partner for highest precision. distributed by Tel
Your partner for highest precision. Käfer Messuhrenfabrik since 1932 The specialist in Dial Gauges We offer a broad manufacturing programme of more than 1000 standard versions of Dial Gauges Dial Test
More informationCal. YM92A. φ27.0 mm H 3.7 mm. S.EPSON Products
Cal. YM92A φ27.0 mm H 3.7 mm Items Rev. Page Specifications 03 1 Appearance 00 2 Casing 03 3 Hand fitting 01 4 Hand setting stem 01 5 Dial-01 01 6-01 Dial-02 00 6-02 Dial-03 00 6-03 Dial-04 00 6-04 Casing
More informationSurface technology for manufacturers of technical springs
Surface technology for manufacturers of technical springs Blast machines Second-hand machines Conveyor systems Service and spare parts Technical springs are used in various shapes and sizes. And because
More informationRETAIL REPAIR PRICE LIST
is undertaken. Table of Contents BATTERY SUPPLY & FITTING... 2 WATER RESISTANT PRESSURE TEST... 2 MINOR SERVICE... 2 CASE REPAIR:... 3 GLASSES... 3 HANDS... 4 DIALS... 4 BAND REPAIRS... 4 ADDITIONAL LINKS
More informationCal. VR33A CHRONOGRAPH 13 1/ mm. 3 years. Ø 30.6mm. Watch Movement Specification and Drawing. Movement Size. Casing Diameter.
Watch Movement Specification and Drawing CHRONOGRAPH Cal. VR33A Movement Size 13 1/2 Casing Diameter Ø 30.6mm Height 3.97mm Battery Life 3 years Cal. VR33A Date: 31/Aug./'18 Items Rev. Page Specifications
More informationMACHINE TOOLS. Automatic Lubrication Systems and Components STEEL AND ALUMINIUM PAPER & WOOD INDUSTRY MARINE AND OFFSHORE FOOD AND BEVERAGE SYSTEMS
Automatic Lubrication Systems and Components STEEL AND ALUMINIUM PAPER & WOOD INDUSTRY MACHINE TOOLS MARINE AND OFFSHORE FOOD AND BEVERAGE SYSTEMS ENERGY AGRICULTURAL MACHINERY MQL - NEAR-DRY MACHINING
More informationTGB GROUP TECHNOLOGIES
TGB GROUP TECHNOLOGIES SLEWING DRIVES CATALOGUE YOU CALL, WE PRODUCE TGB Group Technologies With over 20 years of experience in bearings, gears and power transmission, the TGB Group has become a global
More informationDesign of Helical Gear and Analysis on Gear Tooth
Design of Helical Gear and Analysis on Gear Tooth Indrale Ratnadeep Ramesh Rao M.Tech Student ABSTRACT Gears are mainly used to transmit the power in mechanical power transmission systems. These gears
More information