SPECIFIC ACCESSORIES FOR CADB-HE RANGE

Transcription

1 CADB-HE heat recovery units are complemented with a wide range of air treatment accessories: Cold water coil module Double coil module (hot and cold water) Direct-expansion coil module External filtration module Purification module, specific for high exterior polluted areas. Its quick mounting system and its perfect integration with the heat recovery unit provides a considerable saving in the mounting time comparing them with the conventional accessories. Vertical Configuration Horizontal Configuration Heat recovery unit model Cold water coil Direct-expansion coil Cold water coil + hot water coil (4 tubes) Filtration module Purification Module External pollution Horizontal Configuration CADB-HE-D/DI/DC 4 LH BA-AF HE 4 LH BA-DX HE 4 LH BA-AFC HE 4 LH RH BA-AF HE 4 RH BA-DX HE 4 RH BA-AFC HE 4 RH FBL HE 4 H FB-CA HE 4 H CADB-HE-D/DI/DC 8 LH BA-AF HE 8 LH BA-DX HE 8 LH BA-AFC HE 8 LH RH BA-AF HE 8 RH BA-DX HE 8 RH BA-AFC HE 8 RH FBL HE 8 H FB-CA HE 8 H CADB-HE-D 12 LH BA-AF HE 12 LH BA-DX HE 12 LH BA-AFC HE 12 LH RH BA-AF HE 12 RH BA-DX HE 12 RH BA-AFC HE 12 RH FBL HE 12 H FB-CA HE 12 H CADB-HE-D/DI/DC 16 LH BA-AF HE 16 LH BA-DX HE 16 LH BA-AFC HE 16 LH RH BA-AF HE 16 RH BA-DX HE 16 RH BA-AFC HE 16 RH FBL HE 16 H FB-CA HE 16 H CADB/T-HE-D/DI/DC LH BA-AF HE LH BA-DX HE LH BA-AFC HE LH RH BA-AF HE RH BA-DX HE RH BA-AFC HE RH FBL HE H FB-CA HE H CADB/T-HE-D/DI/DC 4 LH BA-AF HE 4 LH BA-DX HE 4 LH BA-DX HE 4 LH RH BA-AF HE 4 RH BA-DX HE 4 RH BA-DX HE 4 RH FBL HE 4 H FB-CA HE 4 H CADB/T-HE-D/DI/DC 54 LH BA-AF HE 54 LH BA-DX HE 54 LH BA-DX HE 54 LH RH BA-AF HE 54 RH BA-DX HE 54 RH BA-DX HE 54 RH FBL HE 54 H FB-CA HE 54 H Vertical Configuration CADB-HE-D/DI/DC 4 LV BA-AF HE 4 LV BA-DX HE 4 LV BA-AFC HE 4 LV RV BA-AF HE 4 RV BA-DX HE 4 RV BA-AFC HE 4 RV FBL HE 4 V FB-CA HE 4 V CADB-HE-D/DI/DC 8 LV BA-AF HE 8 LV BA-DX HE 8 LV BA-AFC HE 8 LV RV BA-AF HE 8 RV BA-DX HE 8 RV BA-AFC HE 8 RV FBL HE 8 V FB-CA HE 8 V CADB-HE-D 12 LV BA-AF HE 12 LV BA-DX HE 12 LV BA-AFC HE 12 LV RV BA-AF HE 12 RV BA-DX HE 12 RV BA-AFC HE 12 RV FBL HE 12 V FB-CA HE 12 V CADB-HE-D/DI/DC 16 LV BA-AF HE 16 LV BA-DX HE 16 LV BA-AFC HE 16 LV RV BA-AF HE 16 RV BA-DX HE 16 RV BA-AFC HE 16 RV FBL HE 16 V FB-CA HE 16 V CADB/T-HE-D/DI/DC LV BA-AF HE LV BA-DX HE LV BA-AFC HE LV RV BA-AF HE RV BA-DX HE RV BA-AFC HE RV FBL HE V FB-CA HE V CADB/T-HE-D/DI/DC 4 LV BA-AF HE 4 LV BA-DX HE 4 LV BA-DX HE 4 LV RV BA-AF HE 4 RV BA-DX HE 4 RV BA-DX HE 4 RV FBL HE 4 V FB-CA HE 4 V CADB/T-HE-D/DI/DC 54 LV BA-AF HE 54 LV BA-DX HE 54 LV BA-DX HE 54 LV RV BA-AF HE 54 RV BA-DX HE 54 RV BA-DX HE 54 RV FBL HE 54 V FB-CA HE 54 V

2 Horizontal Configurations Heat recovery unit model L (mm) Coil modules BA-AF HE BA-DX HE BA-AFC HE L1 (mm) Filtration modules FBL- HE Purification modules FB- CA CADB-HE-D/DI/DC CADB-HE-D/DI/DC CADB-HE-D/DI/DC CADB-HE-D/DI/DC CADB/T-HE-D/DI/DC CADB/T-HE-D/DI/DC CADB/T-HE-D/DI/DC Vertical Configurations Heat recovery unit model L (mm) Coil modules BA-AF HE BA-DX HE BA-AFC HE L1 (mm) Filtration modules FBL- HE Purification modules FB- CA CADB-HE-D/DI/DC CADB-HE-D/DI/DC CADB-HE-D/DI/DC CADB-HE-D/DI/DC CADB/T-HE-D/DI/DC CADB/T-HE-D/DI/DC CADB/T-HE-D/DI/DC

3 BA-AF HE External cold water coil module, can also be used for hot water in 2 tube-systems. The casing is made of galvanised sheet white plastic-coated, with 25 mm thick internal insulation in models from 4 to and 5 mm thick in models 4 and 54. Condensate tray made from galvanised steel with drain at the bottom. Specific design conceived to integrate in the supply inlet of the CADB- HE heat recovery unit. Allows the flap panel of the heat recovery unit to be used as the flange of the coil. Air Fresh Air Exhaust Air kw Water m 3 /h Pa m/s ºC % ºC % l/h kpa COLD WATER COIL (4 Rows) Water Inlet/Outlet= 7/12 ºC BA-AF HE ,8 14,8 3, BA-AF HE ,7 14,7 6, BA-AF HE ,4 14,5 9, BA-AF HE , ,2 12, BA-AF HE ,6 16, BA-AF HE , , BA-AF HE ,4 15,7 41, COLD WATER COIL in Heat Mode (4 Rows) Water Inlet/Outlet= 5/45 ºC BA-AF HE ,8 42,7 2,9 51 4,7 BA-AF HE ,7 41,6 5, ,7 BA-AF HE ,4 43 8, BA-AF HE , , ,2 BA-AF HE , ,7 BA-AF HE , , ,2 BA-AF HE ,9 42, ,3 LH Configuration RH Configuration *Support feet for vertical versions and models 4 and 54 of horizontal versions. AIR DIRECTION COOL WATER INLET COLD WATER OUTLET DRAIN OUTLET Lenght Width Height Connections (L) (W) (H) (D) HORIZONTALS BA-AF HE 4 H /2 BA-AF HE 8 H /2 BA-AF HE 12 H /2 BA-AF HE 16 H BA-AF HE H BA-AF HE 4 H /2 BA-AF HE 54 H /2 VERTICALS BA-AF HE 4 V /2 BA-AF HE 8 V /2 BA-AF HE 12 V /2 BA-AF HE 16 V BA-AF HE V BA-AF HE 4 V /2 BA-AF HE 54 V /2 PRESSURE LOSS P (P 2 (P a) a) 2 B A -A F HE -A HE P (P 4 (P a) a) 4 B A-A F HE A-A HE Q 25 (m (m Q 6 (m (m

4 BA-AFC HE External module that includes a cold water coil and a hot water coil, suitable to be combined with 4 tube-systems. The casing is made of galvanised sheet white plastic-coated with 25 mm thick internal insulation in models from 4 to and 5 mm thick in models 4 and 54. Condensate tray made from galvanised steel with drain at the bottom. Specific design conceived to integrate in the supply inlet of the CADB-HE heat recovery unit. Allows the flap panel of the heat recovery unit to be used as the flange of the coil. Air Fresh Air Exhaust Air Water kw m 3 /h Pa m/s ºC % ºC % l/h kpa COLD WATER COIL (4 Rows) Water inlet/outlet= 7/12 ºC BA-AFC HE ,8 14,8 3, BA-AFC HE ,7 14,7 6, BA-AFC HE ,4 14,5 9, BA-AFC HE , ,2 12, BA-AFC HE ,6 16, BA-AFC HE , , BA-AFC HE ,4 15,7 41, HOT WATER COIL Water inlet/outlet= 8/6 ºC BA-AFC HE ,5 4 2, BA-AFC HE ,7 43,7 4 5, BA-AFC HE ,4 4,9 4 7, BA-AFC HE , ,7 4 1, BA-AFC HE ,7 4 13,5 58 2,3 BA-AFC HE ,5 38,8 5 26, BA-AFC HE ,5 39,4 5 35, LH Configuration RH Configuration *Support feet for vertical versions and models 4 and 54 of horizontal versions AIR DIRECTION COLD WATER INLET COLD WATER OUTLET HOT WATER INLET HOT WATER OUTLET DRAIN OUTLET Length (L) Width (W) Height (H) Cold water coil connections (D) Hot water coil connections (D) HORIZONTALS BA-AFC HE 4 H /2 1/2 BA-AFC HE 8 H /2 1/2 BA-AFC HE 12 H /2 1/2 BA-AFC HE 16 H /2 BA-AFC HE H /2 BA-AFC HE 4 H /2 1 BA-AFC HE 54 H /2 1 VERTICALS BA-AFC HE 4 V /2 1/2 BA-AFC HE 8 V /2 1/2 BA-AFC HE 12 V /2 1/2 BA-AFC HE 16 V /2 BA-AFC HE V /2 BA-AFC HE 4 V /2 1 BA-AFC HE 54 V /2 1 PRESSURE LOSS P (P 25 (P a) a) 25 B A -A -A F C HE HE P (P 4 (P a) a) 4 B A -A -A F C HE HE Q 25 (m (m Q 6 (m (m

5 Airflow m 3 /h BA-DX HE External module that includes a direct expansion coil for R-41A, this allows the integration of the unit in air conditioning systems of the main existing manufacturers. The casing is made of galvanised sheet white plastic-coated with 25 mm thick internal insulation in models from 4 to and 5 mm thick in models 4 and 54. Condensate tray made from galvanised steel with drain at the bottom. Specific design conceived to integrate in the supply inlet of the CADB-HE heat recovery unit. Allows the flap panel of the heat recovery unit to be used as the flange of the coil. Air Fresh Air Exhaust Air Pressure drop Pa Speed m/s Cooling Power R-41A Refrigerant ºC % ºC % 7ºC EVAP kw kg/h kpa DX BATTERY - COOLING BA-DX HE ,8 15,2 3, ,8 BA-DX HE ,7 14,5 6, BA-DX HE ,4 14,5 9, BA-DX HE ,5 14,4 12, BA-DX HE ,7 16, BA-DX HE 4 LH/RH ,5 14,8 34, ,5 BA-DX HE 4 LV/RV ,5 14,4 35, BA-DX HE 54 LH/RH ,5 14,6 45, BA-DX HE 54 LV/RV ,5 14,4 46, DX BATTERY - HEATING BA-DX HE ,8 33,4 8 1,8 33 1,2 BA-DX HE , ,5 64 6,1 BA-DX HE ,4 33,2 6 5,3 92 4,7 BA-DX HE ,5 33,7 6 7, ,8 BA-DX HE ,5 6 1, ,8 BA-DX HE 4 LH/RH ,5 32,7 7 19, ,6 BA-DX HE 4 LV/RV ,5 33,2 6 19, ,2 BA-DX HE 54 LH/RH , , BA-DX HE 54 LV/RV ,45 33,2 6 25, ,6 LH Configuration RH Configuration *Support feet for vertical versions and models 4 and 54 of horizontal versions AIR DIRECTION R-41 INLET R-41 OUTLET DRAIN OUTLET Lenght (L) Width (W) Height (H) Connections (D) Inlet Outlet HORIZONTALS BA-DX HE 4 H /2 5/8 BA-DX HE 8 H /2 5/8 BA-DX HE 12 H /2 5/8 BA-DX HE 16 H /2 5/8 BA-DX HE H /2 5/8 BA-DX HE 4 H /2 1-3/8 BA-DX HE 54 H /2 1-3/8 VERTICALS BA-DX HE 4 V /2 5/8 BA-DX HE 8 V /2 5/8 BA-DX HE 12 V /2 5/8 BA-DX HE 16 V /2 5/8 BA-DX HE V /2 5/8 BA-DX HE 4 V /2 1-3/8 BA-DX HE 54 V /2 1-3/8 PRESSURE LOSS P P 2 (P (P a) a) 2 B A -DX HE -DX HE P P 4 (P (P a) a) 4 B A-DX HE A-DX HE Q 25 (m Q 25 (m Q 6 (m Q 6 (m

6 FBL-HE Filter modules, supplied without filter, to mount filters AFR-HE (Maximum 2). Made of galvanised steel sheet white plastic-coated. Specific design conceived to integrate in the supply inlet of the CADB- HE heat recovery unit. Allows the flap panel of the heat recovery unit to be used as the flange of the coil. Easy open cover, which allows quick change of filters from the side of the equipment. Length (L) Width (W) High (H) HORIZONTAL FBL-HE 4 H FBL-HE 8 H FBL-HE 12 H FBL-HE 16 H FBL-HE H FBL-HE 4 H FBL-HE 54 H VERTICAL FBL-HE 4 V FBL-HE 8 V FBL-HE 12 V FBL-HE 16 V FBL-HE V FBL-HE 4 V FBL-HE 54 V Registration side RH configuration * Support feet for vertical versions, and sizes 4 and 54 of horizontal versions LH Configuration Registration side AFR-HE List of filters that can be combined with boxes FBL-HE (maximum two filters per box) FIlter box FBL-HE AFR-HE (Accessories and replacement filters for FBL-HE) AFR-HE AFR-HE AFR-HE AFR-HE FBL-HE 4 AFR-HE 2/4 AFR-HE 2/4 AFR-HE 2/4 AFR-HE 2/4 FBL-HE 8 AFR-HE 25/8 AFR-HE 25/8 AFR-HE 25/8 AFR-HE 25/8 FBL-HE 12 AFR-HE 315/12 AFR-HE 315/12 AFR-HE 315/12 AFR-HE 315/12 FBL-HE 16 AFR-HE 315/16 AFR-HE 315/16 AFR-HE 315/16 AFR-HE 315/16 FBL-HE AFR-HE 4/ AFR-HE 4/ AFR-HE 4/ AFR-HE 4/ FBL-HE 4 AFR-HE 45/4 AFR-HE 45/4 AFR-HE 45/4 AFR-HE 45/4 FBL-HE 54 AFR-HE 5/54 AFR-HE 5/54 AFR-HE 5/54 AFR-HE 5/54 * Maximum working temperature: 7ºC. Maximum pressure lost: 25Pa.

7 Pressure loss of the filter boxes FBL-HE according to the filters AFR-HE mounted inside: FBL-HE FBL-HE FBL-HE 4 4 (2 (2 Filters) Filtros) Q 5 (m Q 5 (m FBL-HE FBL-HE 8 8 (2 Filters) Filtros) Q (m Q (m FBL-HE 12 FBL-HE FBL-HE 12 (2 Filters) FBL-HE 12 (2 Filtros) Q 15 (m 5 Q 15 (m

8 Pressure loss of the filter boxes FBL-HE according to the filters AFR-HE mounted inside: FBL-HE 16 FBL-HE FBL-HE 16 (2 Filters FBL-HE 16 (2 Filtros) Q 2 (m 5 15 Q 2 (m FBL-HE FBL-HE 8 16 FBL-HE (2 Filters) FBL-HE (2 Filtros) Q 25 (m Q 25 (m FBL-HE 4 FBL-HE FBL-HE 4 (2 Filters) FBL-HE 4 (2 Filtros) Q 5 (m Q 5 (m

9 Pressure loss of the filter boxes FBL-HE according to the filters AFR-HE mounted inside: FBL-HE 54 FBL-HE 54 2 FBL-HE 54 (2 Filters) FBL-HE 54 (2 Filtros) Q 6 (m Q 6 (m

10 FB-CA HE External filter modules for filtration and purification of outdoor air, especially suitable for integration in ventilation installations of buildings located in urban or industrial areas with high environmental pollution (ODA-2 and ODA-3 defined at the European regulation EN with high particle concentration). The filter modules are composed of two stages of filtration: A first stage formed by panels filled with activated carbon pellets appropriate for the elimination of Volatile Organic Components (VOC s) as CO 2, SO 2, O 3 or Nitrogen Oxides No x. A second stage of filtration, with grade where PM 2.5 particle retention occurs. The zig-zag arrangement of the activated carbon panels allows a high contact surface between the air and the activated carbon, which results in a high efficiency in the elimination of VOC s. SYSTEM COMPOSITION filter (included in the heat recovery unit) Active carbon filtration Particle filter

11 Outdoor air quality Indoor air quality IDA-1 (high) IDA-2 (middle) IDA-3 (moderate) ODA-1 (pure air) F8 F5 ODA-2 (dust) + F6+F8 F5+ F5+F6 ODA-3 (Very high concentration of dust or gases) +GF+* +GF+* F5+ F5+F6 *GF: Gas filter IDA-4 (low) Registration side Registration side RH configuration LH configuration AIR DIRECTION * Support feet for vertical versions, and sizes 4 and 54 of horizontal versions Length (L) Width (W) High (H) HORIZOTAL FB-CA HE 4 H FB-CA HE 8 H FB-CA HE 12 H FB-CA HE 16 H FB-CA HE H FB-CA HE 4 H FB-CA HE 54 H VERTICAL FB-CA HE 4 V FB-CA HE 8 V FB-CA HE 12 V FB-CA HE 16 V FB-CA HE V FB-CA HE 4 V FB-CA HE 54 V PRESSURE LOSS P (P a) 4 FB-CA F B A HE P (P a) 4 FB-CA F B A HE HE Q 16 (m Q 6 (m