PRICE BOOK AIR SEEDER
|
|
- Julie Candace Wilkinson
- 5 years ago
- Views:
Transcription
1 PRICE BOOK AIR SEEDER Effective 1st January 2014 PHONE: FAX NO:
2 CONTENTS Model Codes Air Seeder Pricing.. Liquid Air Seeder Pricing. Liquid Air Seeder Options... Liquid Distribution Kits & &11 Air Seeding Options Seeding Kits. 12 XTRA-Steer Way Metering Units. 13 Stainless Metering Units Small Seeds Boxes Seed Sprayers. 13 Injection Kit.. 13 Duffusers.. 14 Camlocks.. 14 Wheel Centres. 14 LED Lighting Kit. 14 Load/Unload Auger 15 Auger/Tubulator Ready Kit.. 15 Tractor Clips 15 Jack Kit for FM s Harrow Hitch 15 On Board Calibration Display. 16 Simplicity Camera Monitoring Kits 16 Weight Scales.. 17 Calibration Tubs Wing Shut Off Bin Isolation Clutch 17 Lever Quick Release Couplers Additional Couplers.. 17 Trailing (TQ & TR) Seeder Pull Options Adjustable A-Frame Hitch to suit TQC.. 18 A-Frame with Mouth Plates to suit TQC Bare Simplicity A-Frame to suit TQC 18 Stiff Bar & Chain to suit TQC.. 18 Steerable Quad Hitch Extension Frame 18 Trailed Rear Hitch Extension Frame.. 18 Tractor Hydraulics Across Implement Hydraulic Lines Blower Specs & Formulae Blower Types and Options Rexroth Blower Motor 20 Dual Blower P age
3 Monitors & Controllers Topcon E15 Eagle.. 21 Topcon ZYNX X Topcon X X20 External Switch Box X20 External Master Switch X20 Guidance Software Topcon Tillage Switch Kit (MDECU) Topcon Tillage Switch Kit (Monitor) Topcon Blocked Head Monitor.. 22 Topcon Eagle Blocked Head Sensor Kit Monitoring / Drive Type Linear Actuator Variable Rate Control.. 23 Proportional Hydraulic Drive Mounted Models Electric Drive Mounted /Non Mounted Models 23 Non Ground Speed Relative Hydraulic Drive.. 23 Drop Wheel Drive 23 Wheel on Wheel Drive 23 Pricing / Drive Options Linear Actuator Variable Rate Control.. 24 Electric Drive 24 Proportional Hydraulic Drive 24 Tyre Specifications & Options. 25/26 Calculate Hopper Splits. 27 Machine Dimensions.. 28 Double Bin Splits. Triple Bin Splits 3 P age
4 A.C.N Dealer Discount Structure (Wholegoods) Effective 1st January 2014 Category % Discount Base Discount Payment on Dispatch Warranty Stockist Discount 17% 5% 2% 2% Base Discount A base discount of 17% is given to all Dealers. Payment on Dispatch Discount Payment is to be received prior to goods leaving Simplicity Australia, unless otherwise negotiated. If payment is still not received within seven working days of the date of dispatch / invoice, this discount will be withdrawn and wholegoods will be re-invoiced less 5%. Warranty Discount An extra 2% discount is given when the Dealer carries the labour content of the Warranty Claim. All parts will be supplied as per the terms and conditions of the Warranty Policy and Procedures document. This document is available on request from Simplicity Australia. Stockist Discount To be entitled to this discount of 2%, an Air Seeder must be purchased and paid for in full between 1st June and 30th September of the same financial year. This extra discount will apply on all Air Seeders purchased from Simplicity Australia until 1st June the following year. If the stock Air Seeder is retailed before 30th September, then another is to be ordered for stock to retain the discount. Multi-outlet. Dealerships must have one stock machine for every two authorised outlets in order to qualify. It is requested that when a machine is ordered, it be clearly marked with Stock Machine. Simplicity Australia Tillage stockist discount is not concurrent with Air Seeders, therefore to achieve maximum discount of 26%, a Tillage Unit must be stocked within the terms listed above. Simplicity Australia Tillage will remain exempt from any Early Order Program or extra discount until further notification. 4 P age
5 Payment Terms Deposit Payments Once the Wholegoods Order Acknowledgement is signed and received, a deposit of approximately 10% (which is calculated from the recommended retail price) will be invoiced to the Dealer. The deposit is payable within seven days from the receipt of the invoice and the order is confirmed upon receiving this deposit. When a payment is made to Simplicity Australia, it is a requirement that remittance advice is either faxed or ed to inform our Accounts Department of the payment please state the amount and the Invoice Number to which the payment is being made. Payment Terms Final Payments Upon dispatch of the machine the invoice will be raised and faxed to the Dealer the same day. Payment is required as per the terms of the discount structure. It is important to note that if a cheque is going to be forwarded for the payment it has to reach Simplicity Australia within the required time frame. It is preferable to EFT the payment. When a payment is made to Simplicity Australia, it is a requirement that remittance advice is either faxed or ed to inform our Accounts Department of the payment please state the amount and the Serial Number to which the payment is being made. Dispatch Document The Dispatch Document will be sent to all Dealers with the final invoice. It details all componentry dispatched with the Air Seeder / Cultivator. This should be checked for any discrepancies and brought to Simplicity Australia s attention within the 21 day period. SPOT Bookings $5, each Simplicity Australia has a system in place in which a Dealership can book a build position in which a Seeder/Cultivator can be built. Simplicity Australia will issue a delivery date via an Order Confirmation for this booking as close as possible to the date requested. The deposit of $5, must be received by Simplicity Australia within 5 working days upon receipt of the Order Confirmation. Contained with the Order Confirmation is the date which the details are due. Upon the expiry of this date details for the Seeder build will be requested. If then details cannot be given Simplicity Australia reserves the right to cancel the SPOT Booking and retain the $5, SPOT Booking fee For EFT payments, our bank account details are as follows: Bank: Branch: Account Number: Commonwealth Bank of Australia (Dalby) The remittance advice for deposits and final payments can be faxed ( ) or ed (salesadmin@simplicityaus.com.au) 5 P age
6 Phone: Fax: Spare Parts Fax: Address: PO Box 267 DALBY QLD 4405 CONTACTS Sales Manager - cameronjordan@simplicityaus.com.au Sales and Service Cameron Jordan - Representative Doug Campbell dougcampbell@simplicityaus.com.au Sales Secretary - salesadmin@simplicityaus.com.au (07) General Manager P age Troy Law troylaw@simplicityaus.com.au Spare Parts Manager Nicola Harber - Doug Roser dougroser@simplicityaus.com.au
7 Model Codes PM1 PM2 PM3 Mounted on the pull, one bin Mounted on the pull, two bins Mounted on the pull, three bins FM1 FM2 Mounted on the front of the Tractor, one bin Mounted on the front of the Tractor, two bin TR1 TR2 TR3 Trailing Rear (two wheel), one bin Trailing Rear (two wheel), two bins Trailing Rear (two wheel), three bins TB2 TB3 Tow between Tractor and Cultivator, two bins Tow between Tractor and Cultivator, three bins TQC2 TQC3 4 Wheel Trailing Rear, 2 bins (Castoring) 4 Wheel Trailing Rear, 3 bins (Castoring) TQS2 TQS3 4 Wheel Trailing Rear, 2 bins (Steerable) 4 Wheel Trailing Rear, 3 bins (Steerable) TQL3 Trailing Quad with Stainless Steel Liquid Tank TQL4 Trailing Quad with Stainless Steel Liquid Tank TBL3 TBL4 Tow Between with Stainless Steel Liquid Tank Tow Between with Stainless Steel Liquid Tank 7 P age
8 SIMPLICITY AUSTRALIA PTY LTD List Effective 01 January 2014 *all pricing is GST Exclusive s are Australian dollars, FOT Dalby. Transport and Insurance is the responsibility of the Dealer st Castoring Quad LITRE PM $27000 PM2 PM3 $32000 Prop l Hyd TR1 TR2 TR3 TB2 TB3 TQC2 TQC3 TQS2 KG'S TQS3 $34500 Prop l Hyd 2500 $ $44600 $ $ Prop l Hyd $52000 $54000 WHEAT 1125 Prop l Hyd FM2 $ FM1 Steerable Quad $61000 $66500 $58800 $ $64500 $75500 $66700 $ $73500 $88000 $77700 $92500 $79000 $ $87000 $ $88500 $ Export Spec 5250 $90000 $ $91500 $ $ $ $ Export Spec 9750 $ to 2m Wheel Center 1.8 to 2m Wheel Center $68500 $ Export Spec 9000 $84000 $ $96500 $ Export Spec Export Spec $ $ $ $ $ $ $ All trailing and mounted models do not include tractor hydraulics or across implement hydraulic lines as standard. These will need to be ordered separately. Please refer to page 18 All machines supplied standard with heavy-duty REXROTH blower motor and weighing scales. Topcon E15 Eagle monitoring supplied as standard on all granular only seeders, all liquid machines are supplied standard with Topcon X20 Front Mounted machines are supplied standard with Proportional Hydraulic Drive Tractor clips are not supplied standard with Front Mounted Machines. If required these must be ordered and necessary details provided. Air Seeder Pull assemblies must be ordered as required.refer page 17 NB: For overseas and container sales add $350 ($385) per machine for machines up to 3000 Litre and $550 ($605) per machine for machines 4500 litre and above plus any Australian freight charges incurred in handling or dispatching containers. Any Tillage line will incur a $800 ($880) per machine. PRICES ARE RECOMMENDED RETAIL ONLY (PRICES AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 8 P age
9 Liquid Air Seeders All Liquid Seeders Standard with: Bertalini Polypropylene Pump with Bin Agitation Topcon Zynx X20 Controller (Optional X30 Controller) Linear Actuators for full Variable Rate Control Prescription Map Software Included Simplicity s Liquid Control System All 316 Stainless Steel and Polypropylene Components 200L Clean Water Flush Tank. 2 Camlock Fill and Drain 1 Stainless Steel Delivery Camlock (Supplied with Mounted Female + Male with 1 Hose Tail) Xtra-Steer Standard (on all TQSL models) Trailing Quad Liquid Seeders (TQL) TQL3 $170, ($187,000.00) TQL4 $180, ($198,000.00) 12000L Granular / 5000L Duplex Stainless Steel Liquid Standard Tyres: 650/75Rx32 front, 800/65Rx32 rear Standard Wheel Centres: 3.0m front, 3.2m rear TQL3 $152, ($167,200.00) TQL4 $161, ($177,100.00) 9000L Granular / 4000L Duplex Stainless Steel Liquid Standard Tyres: 24.5x32 front, 30.5x32 rear Standard Wheel Centres: 3.0m front, 3.2m rear TQL3 $144, ($158,400.00) 7000L Granular / 3000L Duplex Stainless Steel Liquid Standard Tyres: 23.1x30 front, 24.5x32 rear Standard Wheel Centres: 3.0m front, 3.2m rear Tow Between Liquid Seeders (TBL) TBL3 $142, ($156,200.00) 8000L Granular / 4000L Duplex Stainless Steel Liquid Standard Tyres: 30.5x32 Standard Wheel Centres: 3.2m rear 9 P age
10 17000 TBL3 $176, ($194,150.00) TBL4 $186, ($204,600.00) 12000L Granular / 5000L Duplex Stainless Steel Liquid Standard Tyres: 600/70Rx34 Duals TBL3 $200, ($220,000.00) 13000L Granular / 7000L Duplex Stainless Steel Liquid Standard Tyres: 600/70Rx34 Duals New Machine for 2014 Some options may not yet be available for this model. For more information contact Simplicity Australia. Liquid Air Seeder Options Dual Agitator $ ($902.00) Dosatron Trace Element Injection Initial Dosatron w/- 200L Tank $4, ($5,060.00) Additional Dosatron w/- 100L Tank $4, ($4,510.00) NB: Tow Between liquids can only be fitted with a maximum of one (1) Dosatron Liquid Distribution Kits Liquid Distribution Kits consist of a series of manifolds which divide the primary flow provided by the seeder equally to each tyne. Following the manifolds individual outlet kits control the flow and subsequent backpressure product at each tyne. Important - When pricing liquid distribution kits it is important to include both the manifold kit and the required number of terminal outlet kits. Example A single fold bar with 40 tynes would require: $ manifold kit $ x $65 =$7500 Total kit price excluding GST 10 P a g e
11 Manifold Systems 3 Manifold Kit ( ) Up to 60 Outlet Kit for Single fold Bars 4 Manifold Kit ( ) Up to 80 Outlet Kit for Single fold Bars 5 Manifold Kit ( ) Up to 100 Outlet for Double fold Bars $4, ($5,390.00) $5, ($5,830.00) $6, ($6,600.00) Liquid Terminal Outlet Kits $65.00 ($71.50) There are now 5 different terminal outlet configurations available. All terminal configurations include in-line check valves for fast shutoff and start-up and include a range of line meters (excludes ). All connections are push-fit for simple assembly and maintenance. Stainless steel delivery tubes shown for illustration purposes only not included with terminal assemblies LQS-ATFB LQS-ATL LQS-ATL4X LQS-ATST LQS-ATHR Low Volume FIBP: Permits large bore/ultra-low application. Ability to apply difficult materials. No Line meter is used with this option as back pressure is created via line friction-the longer the line the higher the back pressure. Fits to 3/8 (9.53mm) OD x 1/4 (6.2.7mm) ID stainless steel delivery tube Low Rate 4mm: Suitable for rates up to 100L/Ha, 10 US Gal/Acre on 9-12 Spacing. Fits to 6.35mm (1/4 ) OD x 4.53mm ID stainless steel delivery tube Low Rate 4mm Extended: Extended version of ATL4 configured to raise the position of check valve & line meter to avoid stubble damage. Fits to 6.35mm (1/4 ) OD x 4.53mm ID stainless steel delivery tube Standard: Good stream control across a wide range of application rates. For openers spaced Fits to 3/8 (9.53mm) OD x 1/4 (6.27mm) ID stainless steel delivery tube High Rate: Suited for high rate applications or points with 1 4 liquid delivery tubes. Fits to 1/4 (6.35mm) OD stainless steel delivery tube. 11 P a g e
12 Air Seeder Options Seeding Kits Seeding Kit per Outlet $ ($110.00) Example: If a customer wishes to order a seeding kit for a 55 tyne implement and to place seed and fertilizer into a single seed boot on each tyne. Seeding Kit RRP = 55 x $100 = $5,500 plus GST IMPORTANT NOTE: FITMENT OF NON-GENUINE SEED DISTRIBUTION KITS WILL VOID BLOWER WARRANTY AND CAN HAVE ADVERSE AFFECTS ON SEEDER PERFORMANCE All seeding kits are fitted with stainless steel heads and Simplicity s own smooth bore hose. Standard Seeding Kits include primary dividers, secondary heads, mounting components etc and the following quantity of seeding hose: 31.5 mm 45 or 50 mm 76 mm 2m per planting outlet 5m per secondary head 5m per primary divider N.B. For bars larger than 12m it is advisable to order extra hose to cover the greater bar width Direct Feed Seeding Kits do not use primary dividers but rather run 3 hose directly from the Air Seeder to the 2 ½ Direct Feed Heads mm 76 mm 2m per planting outlet 10m per direct feed head Additional hose can be purchased as required at the following prices, however, please note that hose is only sold in 20 meter rolls Simplicity Smooth Bore Hose 31.5 mm ( ) 45 mm ( ) 50 mm ( ) 76 mm ( ) Simplicity Extra Stiff Terminal Hose (white) 32 mm ( ) $ 7.20 / meter ($ 7.92) $ 8.50 / meter ($ 9.35) $15.00 / meter ($16.50) $17.00 / meter ($18.70) $24.00 / meter ($26.40) Double Shoot Seeding Kits If a seeding kit is required for a traditional double shoot requirement, simply total the number of outlets required for both shoots and multiply by the cost per outlet listed above Example: If a customer wishes to order a seeding kit for a 55 tyne implement and wishes to place seed and fertilizer into 2 separate seed boots on each tyne. Seeding Kit RRP = (55 x 2) x $100 = $11,000 plus GST XTRA-Steer Standard on all Steerable quads from 15,000 litres up and all TQS Liquid Seeders, the XTRA-Steer front axle reduces the seeders turning circle by 25%. Available as an option on smaller steerable quads (6/9/12,000 litres) where tight turning is required, a 25% tighter turning circle is achieved when compared to the standard axle. XTRA-Steer Option 12 P a g e $2, ($3,025.00)
13 8 Way Metering Units Optional on all Seeders 6000 Litres and above, 8 way metering units increase the Seeders delivery capacity up to a potential 8 tonnes per hour. 8 Way Metering Unit Option - (Per Bin) $1, ($1,650.00) Stainless Steel Metering Units When ordered as a factory fitted upgrade with the purchase of a new Seeder (prices are per metering unit and in lieu of standard mild steel metering units) 4 way metering Unit 6 way metering Unit 8 way metering Unit $ 2, ($2,200.00) $ 2, ($2,750.00) $ 3, ($3,850.00) Small Seeds Box A 225L small seeds box is available as an option on all 4500LT and smaller models. All small seeds boxes are supplied with a single primary outlet 200 L (3000L models only) 225 L (4500L models only) 300 L (6000L models only) 400 L (7000L models only) 450 L (9000L models only) 600 L (12/15/17000L models) 800 L (20000L models only) $5, ($6,380.00) each $6, ($6,600.00) each $7, ($7,920.00) each $7, ($8,580.00) each $8, ($9,130.00) each $9, ($10,010.00) each $9, ($10,560.00) each Dual outlet metering unit $ ($440.00) each Add extra on above prices (Dual Outlet possibly required when more than 36 outlets are required) Small Seeds Box Monitoring ( ) $ ($495.00) NEW As standard small seeds boxes do not come with monitoring. Kit includes shaft (rate) sensing and low bin level sensor. Spray Boot ( ) $35.00 ($38.50) each A small seeds spray boot is available, this broadcasts from the front or rear of the machine and covers approximately 650mm when spraying small seeds and 500mm when spreading fertilizer Small Seeds Box Injection Kit A separate seeding kit is required for the distribution of small seeds; the injection kit allows product from the small seeds box to be directed back into the main seeding kit at the outlet of each primary divider 6 way injection kit 8 way injection kit 9 way injection kit $ ($869.00) $ ($1,100.00) $1, ($1,265.00) 13 P a g e
14 4 Inlet Simplicity Diffuser ( ) $ ($220.00) each Diffusers are used to apply varying rates of product through a limited number of outlets. They are also convenient for use in row cropping for quick change from, for example, thirty-two (32) rows for winter crop to eight (8) rows for summer crop, using eight, four way diffusers. In this instance, the diffusers have four inlets and one outlet. The air and seed / fertiliser enters the diffuser through the four inlets, most of the air is released to the atmosphere through the cap and the seed / fertiliser falls to the ground at low velocity (Stainless Steel) Camlocks 3 Camlock breakaways can be purchased for an extra break away on the implement. All Air Seeders (except PM & FM Series) come standard with one set Male (w/- tail) ( ) Female (w/- tail) ( ) Plug ( ) 4 Way Camlock mounted assembly 6 Way Camlock mounted assembly 8 Way Camlock mounted assembly $35.00 ($38.50) $45.00 ($49.50) $15.00 ($16.50) $ ($440.00) $ ($660.00) $ ($880.00) NB: The Camlock assemblies is the same as those used on the Air Seeders and includes Male (w/- tail) & plugs Wheel Centres (All prices are to be added to the price listed on page 8 of this price book. Ensure details are listed clearly on order and noted on Order Acknowledgement machines listed as 2 meter centres are in some cases 2.1m. If exactly 2m is required please consult Simplicity Australia as to what may be required) 1500, 3000 and 4500 litre models: Supplied standard on 2 meter centres. Available on 3 meter wheel centres as an option $ ($550.00) 6000 and 9000 litre models: Supplied standard on 3 meter centres. Available on 2 meter wheel centres if required as an option $3, ($3,300.00) 12000, 13000, and litre models: Supplied standard with 3 meter front and 3.2 meter rear wheel centres. Some models can be supplied on a 3 meter wheel centre. Consult Simplicity Australia for further details No Charge LED Lighting Kits Suit E15 Eagle (Controller : ) (Monitor : ) $1, ($1,155.00) Includes two high powered LED lamps mounted on top of bin for loading. A light is also fitted at ground level for calibration. Lights are operated from cab of tractor through the lights switch on the Eagle. Each lamp contains 8 high powered LED s to give an exceptional amount of light with very low current draw. Suit X20/30 ( ) $1, ($1,650.00) Includes two high powered LED lamps mounted on top of bin for loading. Another light is also fitted at ground level for calibration. Lights are operated from the tractor cab through a switchbox. Each lamp contains 8 high powered LED s to give an exceptional amount of light with very low current draw. 14 P a g e
15 Load/Unload Augers A 150mm (6 ) hydraulic load/unload Auger is available on 4500 litre models and smaller. (Excluding Pull Mount (PM) series) $6, ($7, A 200mm (8 ) hydraulic load/unload Auger is available on 6000 litre models through to litre models $8, ($8,800.00) A 230mm (9 ) hydraulic Auger is available on 10000, 13000, and litre models $9, ($9,900.00) Augers are load only on all Trailed Rear (TR) model Air Seeders. Consult Simplicity Australia before fitting Auger to 6000 TB Models Augers are fitted standard on the right hand side or calibration side of the Air Seeder except for Tow Between seeders which have a standard LEFT HAND Auger Auger/Tubulator Ready Kit $ ($605.00) For Stock units or Seeders that are to be fitted with an aftermarket Tubulator (conveyor), an Auger ready Kit can be fitted ex Factory. This kit includes the 6-Bolt diverter valve and associated hydraulic fittings. Tractor Clips $2, ($3,025.00) Tractor clips are available to suit most common tractors. Tractor clips are not supplied with FM Air Seeder and need to be ordered separately. The standard tractor clip provides an approximate clearance between the ground and the underside of the front bumper of 600mm. Tractor clips plus 100mm (700mm clearance) or plus 200mm (800mm clearance) are available on request. The tractor make and model along with the clearance required, (i.e. standard, plus 100 or plus 200) must be specified at the time of ordering Jack Kit for FM Seeders ( ) $ ($770.00) Three jacks can be supplied to simplify the coupling and uncoupling of the Front Mounted Air Seeder from the front of the tractor. Provision is made on the Front Mount chassis for these, including a stowage position Harrow Hitch $ ($ ) A bolt on hitch is available on the all trailing models for pulling harrows, prickle chains, etc up to a 50 horsepower requirement. All Harrow Hitches come with a 1 connection pin NB: Do not attach cultivator to this hitch and it is not suitable for tow between models 15 P a g e
16 On Board Calibration Display NEW To assist in calibrating the seeder from a single point scales sets are available for all seeders running the E15 Eagle Screen. Kits include water/weather proof mounted on seeder display, calibration bag with in-built weigh cells and the required harness set for plugging in and using the Eagle screen at the seeder for the purpose of calibration. Eagle Monitor (Standard Ground Drive) Supplied with new seeder $1, ($1,694.00) (in lieu of standard calibration tub and scales) Retro Fit Kit $1, ($2,134.00) Eagle Controller (Linear, Proportional Hydraulic & Electric) Supplied with new seeder $1, ($1,331.00) (in lieu of standard calibration tub and scales) Retro Fit Kit $1, ($1,771.00) Simplicity Camera Monitoring Kits NEW Don t settle for aftermarket camera kits purchased from a nameless supplier. Simplicity now offer camera kits tailored to our seeders. With the highest quality integrated wiring and a range of camera mount position options integrated you don t have to go anywhere else for camera systems. Screen Features: 9 inch resistive touch screen for simple camera switching and view changes. 4 Camera display capability with individual camera naming Up to 12 hours of video recording via 32gb SD card (not supplied) Camera Features Wide 130 degree lens angle Automatic white balance adjusting Automatic IR engagement and adjustment 4 Camera Kit 8 Camera Kit 12 Camera Kit $4, ($4,510.00) $6, ($7,260.00) $9, ($10,120.00) s above are for factory fitted kits with cameras mounted in owner specified positions (many positions are catered for but may have restrictions or limitations). Wiring is fully integrated and fitted. Internal bin cameras are fitted in the bins with adjustable mounting, wiring into bins is fully sealed using waterproof, airtight rotary seals. Warranty on all components is 12 months from date of installation and as per the Simplicity Warranty policy. 16 P a g e
17 Weighing Scales ( ) $ ($825.00) each Electronic pad scales with a hand held digital read out. Operating on a 9 Volt battery and weighing up to a maximum of 120kgs. These scales are supplied standard on all Simplicity Air Seeders Calibration Tubs To assist in catching and weighing product metered out during calibration, Simplicity offers custom made calibration tubs. Black To suit 4 outlet metering units Yellow - Heavy Duty To suit 6 and 8 Outlet metering units Wing Shut Off $45.00 ($49.50) $ ($220.00) An electronic kit is available which allows the operator to stop material from being delivered to the wings of the implement 1 BIN $3, ($3,630.00) 2 BIN $4, ($4,510.00) 3 BIN $5, ($5,500.00) NB: Applies only in special applications. Recommend consulting Simplicity Australia before confirming order Bin Isolation Clutch This allows metering units to be turned off individually from the tractor cab. 1 Bin, 2 Bin and 3 Bin clutches are fitted with a control box using L.E.D lights to monitor 1 BIN $1, ($2,090.00) 2 BIN $2, ($2, BIN $3, ($3,300.00) Lever Quick Release Couplers (9500-4) $ ($528.00) per Set On TB models, quick release couplings, which can be hooked up under pressure, can be provided for cultivator hydraulic lines in place of standard quick release couplers. Each coupler comes as a set of 2 (will handle 2 hydraulic lines a pressure and a return) Additional Couplers ( ) $ ($880.00) per Set Tow Between (TB) units come with 2 sets of remotes as standard fitted through the chassis of the seeder to allow for cultivator hydraulic requirements. Should a specific cultivator require additional sets add as required 17 P a g e
18 Trailing (TQ & TR) Seeder Pull Options Please note no pull assembly is supplied with Castoring Quad (TQC) as standard fitment and as such must be specified at point of order Adjustable A-Frame Hitch to suit TQC ( ) $3, ($4,290.00) This is a universal A-Frame hitch designed to adjust for mounting in different positions for varying obstructions on a majority of cultivator frames. It is advisable to obtain detailed dimensions from Simplicity Australia prior to ordering to verify its suitability. If A-Frame is to be supplied for any Simplicity manufactured tillage product, deduct $500 from the above listed Retail A-Frame with Mount Plates to suit TQC $2, ($3,025.00) Included with the A-Frame hitch are mount plates and attachment hardware designed to fit the bars with 4 or 6 inch RHS. To ensure fitting compatibility it is advisable to obtain detailed dimensions from Simplicity Australia prior to ordering. Bare Simplicity A-Frame to suit TQC $2, ($2,475.00) Simplicity s own A-Frame supplied with linkage ball attachment ends. Bar end mounting hardware not supplied. Stiff Bar & Chain to suit TQC ( ) $2, ($2,200.00) Stiff Bar & Chain pull kits are a cost effective option for TQC seeders. This assembly easily adapts to various cultivators through its simple means of adjustment so as to avoid obstructions. (Not suitable for high speed, excessively hilly conditions or continued rough operation on larger TQC seeders) Steerable Quad Hitch Extension Frame POA An additional frame can be supplied to mount the Air Seeder connection point rear of the back bar to avoid the front tyres from contacting harrows and / or press wheels. Accurate measurements will be required by Simplicity Australia to manufacture Trailed Rear Hitch Extension Frame POA An additional frame can be supplied to mount the Air Seeder connection point rear of the back bar to avoid the possibility that Air Seeder may contact the harrows and / or press wheels. Accurate measurements will be required by Simplicity Australia to manufacture. As the TR Air Seeder transfers load into the rear of the cultivator, consideration should be given to the additional load transfer that may be applied to the Cultivator with regard to required hitch length 18 P a g e
19 Tractor Hydraulics $ ($242.00) The tractor hydraulic kit comprises of quick release couplings and fittings required to fit the Air Seeder hydraulic system requirements to the specified tractor. Across Implement Hydraulic Lines as Listed Below Across implement hydraulic kit consists of hydraulic lines and fittings required to operate Air Seeder blower and auger hydraulic motors. This kit is not required for Tow Between (TB) and Pull Mounted (PM) models. Front mount (FM) Air Seeders require 6.5 metre lines. All across machine hydraulics are provided with field fit fittings for one end so they can be cut to length. Rexroth HD 6.5 M FM Only 10 M 15 M 20 M $ ($770.00) $ ($825.00) $ ($ ) $ ($ ) Dual Blower Liquid $ ($ ) $ ($ ) $ ($ ) $ ($ ) Blower Specs & Formulae Simplicity s standard Rexroth motor is a 12cc motor and requires an average of 30 to 60 litres / minute to operate at 2500 to 5000 rpm and can handle a maximum of 6000 P.S.I. It is important for smooth operation that this required flow is supplied consistently through the tractors various operations. If the air seeder fan is not given priority flow a number of problems may occur including hose blocking and/or force feeding. Rexroth blower motors operate using a case drain line, it is critical that the pressure in this line does not exceed 45 P.S.I. to avoid seal damage. With regard to capacities, each 3 primary line from Simplicity Air Seeder is rated at moving a maximum of 1 tonne of product per hour. (Possible only if the seeding kit is setup correctly and within Simplicity s guidelines see dealer login section for seeding kit setup guide) Formula for calculating tonnes of product per hour: Planting width (Metres) x speed (km/h) x planting rate (kg/ha = Tonnes per hour Example: 15m x 8 km/h x 100 kg/ha = 1.2 Tonnes per hour 19 P a g e
20 Blower Types and Options Rexroth Blower Motor STANDARD A heavy duty hydraulic blower drive with a pressure filter and service indicator. Standard fitment on all models. It is a 12 cc hydraulic motor that requires up to 60 litres of oil per minute to achieve the maximum of 5000 RPM. Dual Blower POA In some cases where high application rates are required a dual blower option can be supplied (not easily retro fitted). Dual Blower s are not standard and only suitable when all primary lines are used with an absolute minimum of 120 outlets. Dual blower systems require a very large volume of oil to run effectively (up to 120lpm) and can in some cases have adverse effects if seeding kits are not suitable. In most cases maximum capacity can be achieved using a single blower and 8 outlet metering. It is recommended that prior consultation with Simplicity Staff be sort prior to quoting this option 20 P a g e
21 Monitors and Controller Options Topcon E15 Eagle Supplied as standard to all Granular only Seeders (Ground Drive, Linear Actuator, Proportional Hydraulic and Electric Drive). Monitors up to four shafts, four low bin level sensors, air pressure, fan rpm, ground speed, total area and sub areas. Clutch switch built into monitor. Shows output rate of each bin on a one screen display. With Linear Actuators, Proportional Hydraulic or Electric Drive rate changes are provided via a touch of a button to increase or decrease rate. Can be ground speed related using a wheel sensor, with gps input or in some cases directly coupled to tractors radar system. The E15 also has additional switches to connect lights and auxiliary components Topcon Eagle is not GPS compatible (for position), but when required can be configured to receive a GPS input for speed display. Topcon ZYNX X20 Standard fitment on all liquid models - Optional for all linear actuator, proportional hydraulic or electric drive units. Monitors all shafts, low bin levels, air pressure, ground speed, fan RPM, total areas, 9 subtotal areas and is fully GPS compatible via a Microsoft XP based program. Featuring a 8.4 inch colour touch screen with audio and visual alarm system, the Zynx X20 provides easy rate changes either manually or via GPS signals. The ZYNX X20 is capable of being used for seed rate control, header height controller, spray rate controller and auto hitch control. The ZYNX X20 can be also upgraded to provide steering assistance through an easy to follow guidance line. The ZYNX X20 comes standard with a multilayer seed rate controlling software which normally would retail as an option for $800. Please refer to page 22 for price details on ZYNX X20 Topcon X30 Simplicity is proud to partner with Topcon in their latest release, the X30. With a bright, high resolution, 12.1 multi-touch display, still easily readable in bright sunlight. A thin-profile console with an IP67 rating the X30 is built to withstand the harshest farming conditions including rain and dust. Key Features: Mini-view windows with drag-and-drop positioning Interaction keypads with expandable menus Dashboard readouts provide constant, convenient basic data Integrated LED light bar for manual guidance Full-screen views available for more detailed information Advanced setup wizard provides simple icon based setup control The Topcon X30 has been designed as the premier option for those seeking the ultimate in rate application control. Capable of conducting variable rate for up to 8 products with a host of data management options and job export options the X30 will satisfy the needs of those looking for job to job and year to year tracking to the finest of levels. GPS options for maping, data logging and auto steer out to RTK precision options are all available with the X30 system. 21 P a g e
22 X20 External Switch Box ( ) $ ($880.00) This is a simple switch box which allows the operator to use all operating functions of the Zynx without the need to use the touch screen. X20 External Master Switch ( ) $ ($165.00) This switch allows the operator to control the clutch only without the need to use the touch screen X20 Guidance Software $1, ($1,870.00) This Software is available as an option for connection to an external DGPS, for visual guidance and mapping abilities Topcon Tillage Switch Kit (MDECU) ( ) $ ($660.00) This switch acts as a remote master switch controlled by the raising and lowering of the cultivator, removing the possibility of forgetting to engage the Air Seeder clutch after turning. Topcon Tillage Switch Kit (Monitor) ( ) $ ($935.00) This switch acts as a remote master switch controlled by the raising and lowering of the cultivator, removing the possibility of forgetting to engage the Air Seeder clutch after turning. Topcon Blocked Head Monitor ( ) $3, ($4,180.00) Additional monitor that will light up which sensor is affected. Comes with 5 head sensors and harness to suit. Additional head sensors to a maximum of 18 sensors. Head Sensor is mounted in a terminal hose running from the secondary head to the boot for each head monitored Head Sensors max 18 ( ) Topcon Eagle Blocked Head Sensor Kit ( ) $ ($528.00) ea $2, ($3,190.00) This kit includes 5 head sensors and all wiring required. It connects directly into the Eagle console. It is only applicable with Eagle consoles loaded with a version of software later All current build Air seeders are loaded with correct software for this option Head Sensors max 18 ( ) 22 P a g e $ ($528.00) ea
23 Monitoring / Drive Type Linear Actuator Variable Rate Control Variable rate is available via controlling the Zero-max gearbox with Linear Actuators; the advantage of this system is that all the ground drive equipment remains on the Air Seeder as a back-up system. The Linear system is compatible with prescription rate control Proportional Hydraulic Drive Mounted Models Ground speed related via a GPS receiver (supplied with system), this drive is used because of its ease of rate adjustment. Seeding rate can be monitored and adjusted from the tractor cabin. System has full manual over-ride and is pressure compensating Electric Drive Mounted / Non Mounted Models Ground speed related via tractor radar or sensor on wheel, each motor can draw up to 20 AMPS. This drive is used because of its ease of rate adjustment. Seeding rate can be monitored and adjusted from the tractor cabin and is GPS compatible if used with a ZYNX monitoring system Non-Ground Speed Relative Hydraulic Drive This form of hydraulic drive is the most basic form of hydraulic drive available. As the seeder itself has no electronic control and there is no relationship to ground speed. This form of drive would need to be adjusted as the viscosity of the oil changes (as it heats up). In most cases today this form of drive is unsuitable to cater for broadacre farming. If a basic application is necessary, this may be suitable, consultation with Simplicity Australia would be recommended. Drop Wheel Drive A ground speed related drive. Comprising of a small wheel connected to the seeder drive which is designed to come into contact with the ground when metering is required. This is not recommended for rough or furrowed conditions NB: Only available as option on PM models Wheel on Wheel Drive Also a ground speed related drive, the Air Seeder drive wheel drops onto the cultivator wheel to engage the drive. When the cultivator is raised the wheel normally automatically disengages. When using this system, it is the responsibility of the dealer to provide detailed drawings of the cultivator prior to manufacture. A further charge of $ ($275.00) will apply when Simplicity Australia is required to measure and fit this drive and the cultivator must be delivered to factory NB: Standard on PM models. To delete the drop wheel or wheel on wheel option from the PM Series, deduct $300 off the GST Exclusive Retail Value 23 P a g e
24 Pricing / Drive Options Linear Actuator Model Topcon E15 Eagle Zynx X20/X30 2 Bin Linear $6, $17, Bin Linear $7, $18, Note: That all prices are in lieu of standard KEE Eagle monitor included in standard unit Electric Drive Model FM1 1500/2000 FM2 2000/2500 PM Topcon Eagle 2 bin 3 bin No Charge No Charge $4,400 Single Bin Zynx X20/X30 2 bin 3 bin $10,500 $10,500 $14,900 PM2 3000/4500 $5,100 $16,600 PM $5,900 $16,400 TQ/TR 4500 litres $5,500 $6,300 $16,000 $16,800 TB 4500 litres $5,200 $6,000 $15,700 $16,500 TQ/TR > 4500 litres $5,100 $5,800 $15,600 $16,300 TB > 4500 litres $4,800 $5,600 $15,300 16,100 Note: That all prices are in lieu of standard monitor included in standard unit Small Seeds Box option add $ 3, ($3,300.00) to any of the above listed Proportional Hydraulic Drive Topcon Eagle Topcon Zynx X20/X30 Standard $10, Standard $10, $4, $14, PM2 3000/4500 $4, $15, PM $5, $16, Model FM1 1500/2000 FM2 2000/2500 PM Note: That all prices are in lieu of standard monitor provided with specific model Small Seeds Box option add $ 3, ($3,300.00) to any of the above listed *all pricing is GST Exclusive 24 P a g e
25 34. Tyre Specification & Options STANDARD MODEL TYRE FRONT RIM FRONT 1500 TR TR TQC 10.5/80 x PLY 9 X 18 : 6 STUD 4500 TR 4500 TR 2m 4500 TB 6000 TQS TYRE REAR RIM REAR OPTIONS PRICE TYRE (GST INC) REAR TYRE FRONT RIM FRONT RIM REAR PRICE (GST INC) 18.4 X 30 8 PLY 15 X 30: 23.1 X 30 8 PLY 20 X 30: 23.1 X PLY 20 X 26: $ ($ ) 23.1 X 30 8 PLY 20 X 30: $ ($ ) $ ($ ) 15.5/80 x PLY 15.5/80 x PLY 15.5/80 x PLY 18.4 x 30 8 PLY 15.5/80 x 24: 12 PLY 12 X 24: 6 STUD 12 X 24: 6 STUD 12 X 24: 6 STUD 15 X 30: 8 STUD 12 X 24: 6 STUD 18.4 X PLY 16 X 26: 8 STUD 15.5/ PLY 12 X 24: 6 STUD 18.4 X 30 8 PLY 15 X 30: 8 STUD 18.4 X X 30: 8 STUD 6000 TQC 15.5/ PLY 12 X 24: 6 STUD 18.4 X 30 8 PLY 15 X 30: 8STUD 23.1 X 30 8 PLY 20 X 30: 6000 TQC 2m 15.5/ PLY 12 X 24: 6 STUD 18.4 X 30 8 PLY 15 X 30: 8 STUD 6000 TR 18.4 X 30 8 PLY 15 X 30: 8 STUD 23.1 X 30 8 PLY 20 X 30: $ ($ ) 18.4 X PLY 16 X X PLY 20 X 26 $ ($ ) 24.5 X PLY 21 X 32 $ ($ ) $ ($ ) 6000 TB $ ($ ) 9000 TQS 18.4 X PLY 16 X X PLY 20 X X 30 8 PLY 20 X TQC 15.5/80 X 24 : 12 PLY 12 X 24 6 STUD 23.1 X PLY 20 X X PLY 21 X TQC 2m 15.5/80 X 24 : 12 PLY 12 X 24 6 STUD 18.4 X 30 8 PLY 20 X 30 NB: Other Tyre options are available upon request $ ($ ) $ ($ ) $ ($ ) $ POA 25 P a g e
26 STANDARD RIM TYRE FRONT REAR MODEL TYRE FRONT 9000 TB TB TQS 23.1 X 30 8 PLY 20 X TB TQS X PLY 21 X TB TQS TQS X PLY 650/75R X 32 Radial 21 X X TR TB TQL3 RIM REAR TYRE FRONT RIM FRONT 24.5 X PLY 21 X X PLY 24.5 X PLY 24.5 X PLY 750/60 X 30.5 Radial 30.5 X PLY 750/60 X 30.5 Radial 30.5 X PLY 800/65R X 32 Radial 800/65R X 32 Radial 20 X X STUD 21 X X STUD 27 X STUD 24 X STUD 27 X STUD 27 X STUD 27 X STUD 650/75R X 32 Radial 21 X /75R X 32 Radial 21 X 32 Dual 600/70R TQL 23.1 X 30 8 PLY 24.5 X PLY 21 X X TQL 650/75R X 32 Radial TBL3 OPTIONS PRICE TYRE (GST INC) REAR RIM REAR PRICE (GST INC) 30.5 X PLY 30.5 X PLY 27 X STUD 27 X STUD 800/65R X 32 Radial Dual 30.5 X /65R X 32 Radial 27 X STUD 27 X STUD 27 X STUD 20 X STUD Dual 30.5 X X STUD POA 24.5 X PLY 30.5 X PLY 27 X X STUD 24.5 X PLY 650/75R X 32 Radial 21 X X X PLY 800/65R X 32 Radial 27 X STUD 27 X STUD $ ($ ) $ ($ ) 21 X /65R X 32 Radial 27 X STUD 30.5 X PLY 27 X STUD TBL 20 X STUD 20 X STUD TBL Dual 600/70R34 Dual 600/70R34 $ ($ ) $ ($ ) $ ($ ) $ ($ ) $ ($ ) NB: Other Tyre options are available upon request 26 P a g e $ POA $ ($ ) $ ($ ) $ ($ ) POA $ ($ )
27 To Calculate the Hopper Split To help decide the split most suited to your application, pick the mixtures you are likely to require for the bulk of your planting and write down the application rates for each product. Convert this to litre (contact your product supplier to find the weight per litre of your product as different products and brands vary or alternatively weigh the product and determine its weight in grams per litre, this is also the Kg per 100L) and then add up the total litreage per hectare. Divide this into the litreage for each product and multiply by 100 to give the percentage capacity required by each product. Example: 60kg of grain is about 77 litres. The total capacity required is 227 litres per hectare so the percentage of the total required for grain is calculated as follows: Calculate thus, x 100 = 33.9, a capacity of 34% of total is ideal for this grain PRODUCT KG / HA *KG / LITRE LITRE / HA % OF TOTAL NEAREST SPLIT Grain Super Urea TOTALS No. 3 *The Kg / Litre may vary for different products, the figures used are given as a guide only, you must confirm before calculating The nearest split is number 3, 38 / 34 / 28, this will ensure that all your bin compartments last approximately the same length of time This will also give you a 60 / 40 (62 / 38, by using two bins for one product) split for conventional planting if required for lupins etc 27 P a g e
28 Machine Dimensions MODEL FILL HEIGHT BIN LID SIZE 1500 PM TR FM FM FM PM TR TQ PM PM TR TR TB TB TQ TQ TR TR TB TB TQ TQ TQ2 2m 6000 TQ3 2m 7000TQS 9000 TB TB TQ TQ TQ2 2m 9000 TQ3 2m TQSL TB TB TBL TQ TQ TQ TQL TQ TB TB TQ TBL TQL TQ TR X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 1000 BIN LID CENTRE S GROUND CLEARANCE WHEEL CENTRE DUALS OVERALL WIDTH OVERALL LENGTH Notes: 1. Fill height from bottom of chassis to lid frame on all mounted models, add the height of the pull or bar to find the actual fill height 2. All specifications are calculated using standard equipment 3. Specifications are subject to change without notice 4. Tyre pressure, please consult the relevant Operators Manual 28 P a g e
29 Bin Split Options
30 Bin Split Options 6000 DOUBLE 6000 TRIPLE
31 Bin Split Options 9000 DOUBLE 9000 TRIPLE
32 Bin Split Options DOUBLE TRIPLE
33 Bin Split Options 7000 Double Bin 8000 Double Bin (for 12000TBL3)
34
35 Notes Notes
36 Notes Notes
37 PRICE LIST TILLAGE EFFECTIVE 1st January 2014 PHONE: FAX NO: P age
38 CONTENTS Allrounder List 308 Series Allrounder - Floating Hitch.. Allrounder Standard Features.. Cultivator Pull Lift Jack.. Dual Accumulators... Lift Circuit Lock-out Valves.. Tilt Circuit Lock-out Valves.. Tyne Pressure Gauge. Lockout Valves. Hydraulic Filtration Allrounder Tyne Standard Features Hydraulic Tyne Cylinders Pins & Bushes.. Tyne Breakout.. Adjustable Tyne Depth. Standard Frame Features. 305 Series Pricing &8 Allrounder Options Shank - Drop Forged.. Shank - Series K Minimum Till Shank - Series J Minimum Till. Offset Double Shoot Pendulum Tyne Points. Seed Boots Wing Tyre Upgrade. Air Seeder Pulls and Frames... Marker Arm... Steel Across Machine Hydraulics... Wing Extensions... Wing Wheel Isolation Kit Bleed Tap Assembly... Simplicity Press Wheels Press Wheel Pricing STRIKER Striker Plating Units Dual Press Wheel Option.. Double Disc Opener Dual Closing Wheel Option.. Hydraulic Manifold.. Hydraulic Accumulator.. 14& X-BAR PRICE LIST Features. Linkage Units - Single Row.. Linkage Units - Dual Row.. Trailing Units - Single Row Trailing Units - Dual Row.. Dual Row Folding P age
39 ALLROUNDER PRICE LIST EFFECTIVE 1st January 2014 PHONE: FAX NO: P age
40 308 Series Allrounder Floating Hitch (NEW) For over 15 years now Simplicity has offered the 305 Series Allrounder (Tilt Controlled Hitch), in 2012 we were pleased to release our 308 Series Floating Hitch Allrounder. Building on the strengths of over two decades of hydraulic tyne experience, the new 308 Series Allrounder has been many years in the making. The 308 Series encases all the features of the renowned 305 Series but also incorporates a mechanical floating hitch. The utilisation of a floating hitch has also resulted in Simplicity s Allrounder range growing in width, now stretching out to 20m. Though we have added more wheels, in order to keep the excellent flotation the Allrounder is recognised for we haven t reduced the tyre size. The 308 series still uses large 15.5/80x24 16ply tyres in-frame, plus a row of 12.5/80x18 front tyres (larger centre tyres on 18m and above). To reduce the number of hydraulic cylinders necessary and to ensure the hydraulic system remains simple and effective the 308 Series Allrounder uses a Cam linkage assembly from the rear wheels. This system means the front wheel assemblies don t require any hydraulics, but rather work directly off the rear wheels when raising and lowering. 308 Series Pricing 9m 9m 9m 250mm 300mm 333mm 37 tynes 31 tynes 28 tynes $ $ $ s shown are Recommended Retail (RRP) excluding GST. All prices are subject to change without notice 12m 12m 12m 250mm 300mm 333mm 49 tynes 41 tynes 36 tynes $ $ $ For exact transport or working widths, or option suitability contact Simplicity Australia. 18m 18m 18m 250mm 300mm 333mm 73 tynes 61 tynes 55 tynes $ $ $ m 20m 250mm 300mm 79 tynes 67 tynes $ $ As the 308 Series Allrounder is a recent line if you have enquiry for a machine not listed here please contact Simplicity Australia 4 P age
41 Allrounder Standard Features Wing Counter Balance Valves Standard No Charge Standard on all models fitted to the wing fold cylinders. These are a safety feature that avoids the wing from falling quickly in the event of a hydraulic failure Cultivator Pull Lift Jack Standard No Charge This option provides for easy connection and un-coupling of the cultivator. It consists of a hydraulic jack that is fitted to the cultivator s pull allowing the operator to raise or lower using the tractors remotes Dual Accumulators Standard No Charge Dual piston type accumulators are fitted to all models. These are both 9.8 litre capacity giving a total of slightly under 20 litres available. Each accumulator is pre-charged to differing gas pressures to allow for breakout ranges Lift Circuit Lock-out Valves Standard No Charge Lock-out valves are fitted standard to all models. These valves isolate the circuit from possible leakage back through the tractors remotes Tilt Circuit Lock-out Valves Standard No Charge Lock-out valves are fitted standard to all 305 series models. These valves isolate the circuit from possible leakage back through the tractors remotes. Tyne Pressure Gauge Standard No Charge This gauge measures the hydraulic pressure applied to the tyne circuit. For each 200 psi of hydraulic system pressure 100 pounds of tyne breakout is produced Lockout Valves Standard No Charge Lockout valves are contained within the block for both the tilt and lift hydraulic circuit. These lockout valves eliminate the possibility of hydraulic oil leaking back through tractor remotes when under pressure Hydraulic Filtration Standard No Charge Filters are built into the hydraulic block that reduces the possibility of contamination of hydraulic components occurring 5 P age
42 Allrounder Hydraulic Tyne Standard Features Hydraulic Tyne Cylinder The tyne cylinder allows the tyne to trip as required when plumbed through the accumulators. Each cylinder has balled ends which eliminates the possibility of tyne forces being transferred into the shaft of the cylinder causing seal damage Pins and Bushes Greaseable 4140 pins and bushes are fitted in all pivot points. The main tyne pivot has seals fitted that allow the grease to expel during greasing, but do not let the dust in. This dramatically improves grease function and prolongs pin and bush life. Tyne Breakout The tyne has an constant operating breakout of 100 pounds to 700 pounds adjustable via hydraulic pressure. The design of the tyne allows the tyne breakout to increase through a portion of the trip, but then decreases allowing the tyne to trip out without resulting damage Adjustable Tyne Depth Each tyne is vertically adjustable so as to allow depths of each tyne to be adjusted individually. The tyne shank is vertically adjustable a total of 80mm with four 20mm increments 305 Series Allrounder Frame - Standard Features The Allrounder frame is a 100 x 100mm fully welded five row RHS frame. The frame is manufactured using 9 mm wall thickness RHS for the centre section and 6mm RHS on the wings. The frame has wheels positioned through the centre to allow for increased ground following characteristics. Each frame can be fitted with 200mm, 250mm, 300mm and 333mm tyne spacings. This allows for changes to be quickly and easily made to the Allrounder s tyne configuration Fore and aft leveling is easily catered for via fitted tilt cylinders. These cylinders can also be fitted with ultrasonic electronic depth recognition to provide for a full floating hitch. Auto depth control can similarly be catered for using ultrasonic electronic depth recognition to control the lift circuit 6 P age
43 Cultivator Width Tyne Centres 6 Metre Number of Tynes 200 mm Width Specifications Cut Width Single Fold 6.20 M 250 mm 7.0M Cut Width 41 Swath Width Cut Width 45 Swath Width Cut Width 51 Swath Width 8.0 M 8.2 M 8.8 M 9.0 M 10.0 M 10.2 M 3 Metre ***3 Metre $72,500 $81,000 $93,000 $104,000 $112, Cut Width Swath Width Cut Width Swath Width Cut Width Swath Width Cut Width Swath Width Cut Width Swath Width 6.0 M 6.25 M 7.0 M 7.25 M 8.0 M 8.25 M 9.0 M 9.25 M 10.0 M M Centre Section Wheel Centres Single Fold 2 Metre 2 Metre 2 Metre 3 Metre ***3 Metre $69,000 $77,000 $86,500 $98,000 $104,500 Number of Tynes 300 mm 6.80 M 10 Metre 2 Metre Double Fold Cut Width Swath Width Cut Width Swath Width Cut Width Swath Width Cut Width Swath Width Cut Width Swath Width 6.0 M 6.30 M 7.20 M 7.50 M 7.8 M 8.1 M 9.0 M 9.3 M 10.2 M 10.5 M Centre Section Wheel Centres Single Fold 2 Metre 2 Metre 2 Metre 3 Metre ***3 Metre $66,500 $74,500 $82,000 $93,500 $100,000 Double Fold 333 mm 35 Swath Width 9 Metre 2 Metre Number of Tynes Width Specifications Cut Width 8 Metre 2 Metre Double Fold Width Specifications 31 Swath Width 6.0 M Centre Section Wheel Centres 7 Metre Number of Tynes Width Specifications **NCT *CT *CT **NCT **NCT *CT *CT **NCT **NCT *CT Cut Width Swath Width Centre Section Wheel Centres 5.66 M 6.0 M 6.0 M 6.33 M 2 Metre 7.0 M 7.33 M 7.33 M 7.66 M 2 Metre 7.66 M 8.0 M 8.0 M 8.33 M 2 Metre 8.66 M 9.0 M 9.0 M 9.33 M 3 Metre $64,500 $65,000 $73,000 $73,500 $79,000 $80,000 $90,000 $91,000 Single Fold Double Fold 9.66 M 10.0 M 10.0 M M ***3 Metre $95,500 $96,500 Key: CT Denotes Standard with Centre Tyne NCT Denotes No Centre Tyne Option ***3 Metre Denotes 2 metre centre wheel option avail - Please add $2500 ($2750) to Recommended Retail listed if 2 metre wheel centre option is required Cut Width Distance between the centre of outer tynes Swath Width Allows for the 'guess row' ie. Cut Width plus Tyne Spacing 7 P age
44 Cultivator Width Tyne Centres Centre Section Wheel Centres 11 Metre 55 Cut Width Swath Width 10.8 M 11.0 M 3 Metre 12 Metre 61 Cut Width Swath Width 12.0 M 12.2 M 3 Metre 13 Metre 65 Cut Width Swath Width 12.8 M 13.0 M 3 Metre Single Fold $122,300 $133,300 $142,800 Double Fold $141,500 Number of Tynes 200 mm Width Specifications Number of Tynes 250 mm Width Specifications 300 mm Cut Width 12.0 M 49 Swath Width M Cut Width 13.0 M 53 Swath Width M 57 Cut Width Swath Width 14.0 M M 4 M Single Fold 3 M Double Fold Cut Width 15.0 M 61 Swath Width M 3 Metre 3 Metre 3 Metre Single Fold $114,500 $124,500 $134,500 $145,000 Double Fold $140,000 $168,500 $181,500 Width Specifications Cut Width 10.8 M 37 Swath Width 11.1 M Cut Width 12.0 M 41 Swath Width 12.3 M Cut Width 13.2 M 43 Swath Width 13.5 M 47 Cut Width Swath Width 13.8 M 14.1 M 4 M Single Fold 3 M Double Fold 3 Metre Cut Width 15.0 M 51 Swath Width 15.3 M Centre Section Wheel Centres 3 Metre 3 Metre 3 Metre Single Fold $109,000 $119,000 $128,500 $139,000 Double Fold $129,000 $163,500 $175,500 Number of Tynes 333 mm 45 Swath Width M 15 Metre Centre Section Wheel Centres Number of Tynes 3 Metre Width Specifications 33 *CT 34 **NCT 36 **NCT 37 *CT Cut Width Swath Width M 11.0 M 11.0 M M M 12.0 M 12.0 M M M M M M 4 M Single Fold 3 M Double Fold M M Centre Section Wheel Centres Single Fold Double Fold 8 P age Cut Width 11.0 M 14 Metre 3 Metre $105,500 $106,500 3 Metre 3 Metre 3 Metre $115,500 $116,500 $124,500 $135,500 $132,000 $133,000 $160,000 $170,500
45 Important Terminology and Abbreviations Tyne Spacing: This is the distance between each tyne centre Cut Width: This is the actual distance between the very outside tyne shanks Swath Width: This is the working width of the unit including the guess row (ie: the cut width plus the guess row) Guess Row: This is the under lap of the unit. This distance equals one row spacing Centre Section Wheel Centres: This is the distance between the implement centre section wheels. Please note that some models are available on differing centre section wheel centres. Reference to these can be found on page 5 & 6 Outer Wing Wheel Centres: These on all single fold models are on the outer edge of the frame. (Eg: A 12m model has the outer wheels on 12m centres) Centre Tyne (CT): This indicates that the tyne layout begins with a centre tyne position, this obviously will also indicate that a uneven number of tynes is fitted, (or odd number) No Centre Tyne (NCT): This indicates that the tyne layout begins each side of the centre tyne position. This obviously will also indicate that a even number of tynes is fitted, (or even number) 9 P age
46 Allrounder Options All pricing listed below includes all standard items but does not include any tyne shanks or options. These must be ordered as required with each unit. Frames are suitable for all row spacing. This allows the end user to change of modify the tyne spacing should this be required. All Allrounder s are supplied less tyne shanks and as such they must be ordered as required. Simplicity currently offers 3 standard tyne options. Consideration may be given for specific tyne shank modification upon request. Shank - Drop Forged ( ) $95.00 ($104.50) each This vertically adjustable tyne has a drop forged toe at a 47 degree angle. It measures 50mm deep and 20mm wide. It has 2 x ½ inch bolt holes suitable for tools with 1 ¾ inch to 2 ¼ inch centers. It is supplied as shown without a seeding boot or point Shank Series K Minimum Till ( ) $ ($121.00) each This tyne is vertically adjustable tyne is manufactured using a Series K point adaptor. All Simplicity Series K points can be fitted to this shank. This adaptor also suits the full range of Keech points. It has a narrow profile of 20mm x 500mm and is supplied as shown without a point or seeding boot Shank Series J Minimum Till each $ ($187.00) ( ) This tyne is designed to suit the Allrounder Tyne Housing, but is fitted with a Series J point adaptor. This tyne shank will also fit genuine Janke points. It has a narrow profile of 20mm x 50mm and includes a 32mm Seeding Boot Shank - Offset Double Shoot Pendulum $ ($220.00) each An additional tyne can be mounted to the right or left of the traditional tyne shank. This allows for product to be placed a distance to the right or left of the main shank. This distance can vary depending on the tooling fitted. The tyne trips with the main assembly and pivots so as to remain vertical through the trip action, this eliminates the possibility of this tyne coming into contact with the frame when tripped fully. It is only suitable for shallow work with light tooling fitted. The listed price does not include the ground engaging tooling. Recommended that Simplicity be consulted prior to quoting 10 P a g e
47 Points Point - Series J Cast w/-tungsten Tip Point - Series J Cast w/- 12mm Tungsten Front Point - Series J Cast w/- 19mm Tungsten Front Point Series J NiHard w/-tungsten Tip & Wings $28.00 each $60.00 each $99.00 each $43.00 each Point Series J Plate Low Profile w/12mm Tungsten Tip and Tung Tuff Top Point Series J Plate Low Profile w/12mm Tungsten Full Front Edge $97.00 each $ each Point Series J Plate Deep Profile w/- 12mm Tungsten Tip and Tung Tuff Top Point Forged Shank Cast Knife w/- 12mm Tungsten tiles. 155mm Blade Length $ each $60.00 each Point Series K Cast Inverted Tee w/- Tungsten Point Series K Cast Inverted T w/tung Tuff $85.00 each $50.00 each Shank Assemblies shown for illustration purposes only. All point dimensions & specifications available on request. Maximum discount available on points - 25% 11 P a g e
48 Seed Boots $30.00 each ($33.00 each) Single shoot boots are available to suit both Drop Forged Tyne standard tyne and Minimum Till Tyne. These boots are designed for use with the Inverted T Point and standard sweep type points with respect to tyne selected. These boots may not be suitable for use with other ground tools ( ) (PB-060) Wing Tyre Upgrade 15.5/80 x 24 (12 ply) $ ($ ) All Cultivators up to and including 10m widths are standard with 15.5/80 x 24 on the centre section and 10.5/80 x 18 on wing wheels. To upgrade Wing Tyre Option, please include listed price Air Seeder Pulls and Frames These frames are added so as to pull Air Seeder from correct height and length so as to avoid clashing or fouling on rear mounted items such as press wheels and harrows. Some dimensions will be required with respect to the length of these press wheels or harrows Pull to Suit TR Air Seeder ( ) Pull to Suit TQC Air Seeder (Castoring) Pull to Suit TQS Air Seeder (Steerable) ( ) $ ($ ) $ ($ ) $ ($ ) Marker Arms $ ($10,670.00) Marker arms are available to suit all single wing fold models. includes all hydraulic components required Steel Across Machine Hydraulics POA Wing Extensions POA All Simplicity Allrounder models are designed so as to fit one extra tyne to each side. Wing Extensions are available but suitability may vary with regard to tyne spacing Wing Wheel Isolation Kit $ ($ ) A solenoid operated valve isolates the wing wheels from the main wheel phasing system allowing them to be retracted into the frame to reduce transport width. Bleed Tap Assembly $85.00 ($93.50) A tap kit which assists in bleeding of the Allrounder tyne hydraulic manifold system. Consisting of a hydraulic tap and hose, allowing control during bleeding and for the bled oil to be easily salvaged. 12 P a g e
49 Simplicity Press Wheels (Option) Simplicity Press Wheels have been designed to match the Allrounder range perfectly. Tyne patterns are adjusted for use with Simplicity Press Wheels to still achieve maximum trash flow and maintain uniform field finish. Having headstock designs incorporating tyne maintenance cutouts means Simplicity Press Wheels can mount flush up against the Allrounder tynes and not hinder the operation or service of the tynes. With the addition of the Wheel Adjustment Kit and the Sowing Boot Kit the press wheel assemblies can be upgraded to produce a true ground following, double shoot seeding system. A range of press wheel styles are available, please contact Simplicity to find out more. Press Wheel Pricing Press Wheel Assy $ ($825.00) Wheel Adjustment Kit $90.00 ($99.00) Scraper Kit (requires Wheel Adjustment Kit) $36.70 ($40.37) Sowing Boot kit (requires Wheel Adjustment Kit) $ ($192.50) 13 P a g e
50 Striker Simplicity Striker Units are available for fitment to specific Allrounder models. Please contact Simplicity Australia for more details. Strikers may require manifold and/or accumulators depending on requirements. Striker Planting Units $ ($ ) Hydraulic ground following tools incorporating a 16 coulter with a depth wheel each side, with a narrow profile inverted T type tyne and a range of closing press wheels. Includes headstock to suit a 4 inch frame, (headstocks to suit other frame sizes are available on request), Simplicity inverted T Minimum Till Point and Single Shoot Seeding Boot Dual Press Wheel Option $ ($632.50) Consists of two 300mm press wheels mounted on a walking beam for increased load share abilities Double Disc Opener (Option) $ ($825.00) Consists of double 16 inch discs, heavy duty dual race sealed bearings and single shoot seed boot 14 P a g e
51 Dual Closing Wheel (Option) $1,575 ($1,732.50) (Check with Simplicity for discount) Suitable for moist conditions where double discs without closing wheels can peel up the top layer of soil. Hydraulic Manifold $ each ($220.00) Includes all hydraulic components required except Accumulator Hydraulic Accumulator 1 to 8 Units 8 to 16 Units 16 or More Units $1,600 ($1,760) $2,200 ($2,420) $2,600 ($2,860) Other options may be available upon request to Simplicity Australia. These options may incur additional charges and effect normal delivery targets 15 P a g e
52 Notes Notes 16 P a g e
53 X-BAR PRICE BOOK EFFECTIVE 1st January 2014 PHONE: FAX NO: P a g e
54 X-Bar List Features Unique clamping system allowing for unrestricted layouts and easy unit movement No U Bolts Single or Dual Row configurations available Linkage or Trailing Options 6 to 12 metre planting widths. Linkage Units - Single Row This consists of a single row X-Bar fitted with 3 point linkage tractor mount, depth wheels and parking stands. No hydraulics are included in this price The below listed prices are for rigid non-folding bars. Fold options can be added for an additional charge. Folding may limit some row spacings available. (POA) 6 metre 8 metre 9 metre 10 metre 12 metre $13, $16, $18, $21, $24, ($14,410.00) ($18,480.00) ($20,790.00) ($23,100.00) ($26,400.00) NB: Single Row units are only suitable for minimum row spacing of greater than 500mm Linkage Units - Dual Row This consists of two X-Bar beams fitted with three point linkage tractor mount, depth wheels, parking stands and lift assist. Hydraulics are fitted to the lift assist assembly only The below listed prices are for rigid nonfolding bars. Fold options can be added for an additional charge. Folding may limit some row spacings available. (POA) 6 metre dual row 8 metre dual row 9 metre dual row 10 metre dual row 12 metre dual row $29, ($31,950.00) $37, ($41,250.00) $41, ($45,650.00) $44, ($48,400.00) $53, ($58,300.00) NB: Dual Row units are suitable for minimum row spacing greater than 300mm 18 P a g e
55 Trailing Units Single Row This consists of a single X Beam complete with rigid hitch, four phasing lift wheels and a hydraulic single wing fold Hydraulics supplied for lifts and fold circuits only 12 metre 14 metre 8 metre 9 metre 10 metre $34, ($37,950.00) $37, ($41,250.00) $43, ($47,850.00) $53, ($58,300.00) $64, ($70,950.00) NB: Single Row units are only suitable for minimum row spacing of greater than 500mm NB: Folding may limit some row spacings available NB: Larger models considered upon application to Simplicity Australia Trailing Units Dual Row This consist of a dual row X beam configuration complete with floating hitch, phased lift wheels and hydraulic single wing fold Hydraulics supplied for lift and folded circuits only Please contact Simplicity Australia for Pricing on the this Trailing Unit Model NB: Dual Row units are suitable for minimum row spacing greater than 300mm. NB: Folding may limit some row spacings available. NB: Larger models considered upon application to Simplicity Australia Trailing Componentry $26, ($28,600.00) Dual Row Folding Componentry $23, ($25,300.00) 19 P a g e
56 Striker Striker Assemblies are available complete with X Bar Headstock Assemblies, Tyne fitted with Inverted T Point and single shoot boot and Single 50mm flat press wheel Striker $2,750 ($3,025) each Hydraulic components not including Accumulator are available. This includes manifold and all hydraulic components to connect to tractor, (excl. Accumulator.see below) Hydraulic Manifolds (per unit) $200 ($220) each Accumulators are available with reference to the number of Striker Units fitted to the Toolbar Accumulator 1 to 8 Units 8 to 16 Units 16 or More Units $1,600 ($1,760) $2,200 ($2,420) $2,600 ($2,860) Double Disc Opener $750 ea ($825) Double Disc Openers complete with single shoot Seeding Boot are available Dual Press Wheel Assembly* $575 ea ($632.50) Dual Press wheels are available to be fitted to the Striker Dual Closing Wheel (Option) $1,575 ($1,732.50) (Check with Simplicity for discount) Suitable for moist conditions where double disks without closing wheels can peel up the top layer of soil. *For Dual Closing Wheel option image see page P a g e
Topcon. The Leading Provider of Optical and Positioning Solutions
Topcon The Leading Provider of Optical and Positioning Solutions Topcon Founded in 1932 Major shareholder: Toshiba Topcon business units: Topcon Positioning Systems Topcon Medical Topcon Industrial & Optics
More informationAIRSEEDER OPERATORS MANUAL
AIRSEEDER OPERATORS MANUAL Model: FM2 2500 Serial No: Description: Front Mount, 2500 litre, 2 bin, Proportional Hydraulic Drive For Instruction On: Front Mounted Machine Configuration Eagle Controller
More informationACCURACY. PRODUCTIVITY. RELIABILITY.
ACCURACY. PRODUCTIVITY. RELIABILITY. Precision Air 4955 cart. YOU ASKED FOR IT. WE BUILT IT. Introducing the new Case IH Precision Air 5 series air carts with new features and systems designed to meet
More information4745 Drill OWNER'S MANUAL (06-08) #
4745 Drill OWNER'S MANUAL (06-08) # 605865 Identification Your CrustBuster drill is identified by a Serial Number and Model Number. Record these numbers in the spaces provided in this manual and refer
More informationFull screen alarms identify abnormal or failed operation on all enabled system components/controls
The world s most versatile controller IntelliAg puts the future of application control in your cab, providing state-of-the-art communication between implement and tractor. This precision farming system
More information6000 and 7000Series Granular Applicator
6000 and 7000Series Granular Applicator 6000 and 7000 Granular Applicator September 2002 1 Specifications 7030 Granular Specifications and Options Applicator Fits on Air Seeder Model 7130 7180 Ca pacity
More informationPRODUCT RANGE BTS AP6401F_INB.indd 1 13/03/
PRODUCT RANGE 2 3 INDEX 4-5 Flexi-Coil - Giving you what you need 6-9 Precision Agriculture 10-15 Air Cart 16-17 Precision Cultivators - ST820 18 Air Drills 18-19 5000HD Air Drill 20-21 5500 Air Drill
More informationAir Seeder Components
Air Seeder Components Dual Manifold System Equipped with two vertical tubes Horizontal Flow Divider With adjustable flow balance Manifolds for all applications Call 701-232-4199 for quotes on manifold
More informationSalford Group Inc. American Whole Goods Price Book. Effective October 24, 2016
Salford Group Inc. American Whole Goods Price Book Effective October 24, 2016 1 Intentionally Blank 2 Product Index Secondary Tillage Primary Independent Series Harrows Click a page title to navigate to
More informationSHAFT DRIVEN SELF PROPELLED AUGERS
SHAFT DRIVEN SELF PROPELLED AUGERS 35 X 10 Self Propelled Auger Illustrated All augers complete with electric start motor and 23 litre fuel tank 31 h/p Vanguard & Donaldson air cleaner fitted (standard
More informationPRE DELIVERY INSPECTION 6200 / 6280 / 6350 / 6450/ 6550ST/ 6700ST TOW BEHIND Date:
Effective Sept 15/14 PRE DELIVERY INSPECTION 6200 / 6280 / 6350 / 6450/ 6550ST/ 6700ST TOW BEHIND Date: Dealer: Model: Serial # DETAILED SPECIFICATIONS: REAR TIRES FRONT TIRES 18.4 x 26 R1 Lug tires 21.5L-16.1
More informationCONTROL SYSTEMS FOR PRECISION FARMING. IntelliAg puts the future of application control in your cab providing state-ofthe-art
CONTROL SYSTEMS FOR PRECISION FARMING IntelliAg puts the future of application control in your cab providing state-ofthe-art communication between implement and tractor. INTELLIAG CONTROL SYSTEMS Compatible
More informationFan Jet Mini 65, 130 & 240
FAN JET MINI Fan Jet Mini 65, 130 & 240 The Mini is designed for restricted spreading of slug pellets from approximately 2 12 metres, typically mounted to the back of a cultivator immediately prior to
More informationENGINEERED FOR PRECISION SEEDING PERFORMANCE
ENGINEERED FOR PRECISION SEEDING PERFORMANCE morris-industries.com SMART DESIGN PRECISION GRADE Every feature, every option, the silver metallic paint with long term corrosive protection - is all designed
More informationGason. ScariTILL and HydraTILL. Australia's greatest range of tillage and seeding equipment
Gason ScariTILL and HydraTILL Australia's greatest range of tillage and seeding equipment www.gason.com.au The Gason Story In February 1946 Frank Gason founded a small, family owned and operated motor
More informationCOMPACT DISC HARROW HELIODOR 9
COMPACT DISC HARROW HELIODOR 9 2 Versatility is the trump card Compact disc harrows have revolutionised modern agriculture for more than ten years now. No other soil cultivation implement combines a comparable
More informationP2350 P3440 P4460 P3550 P4580 P4760 P4950
P2350 P3440 P4460 P3550 P4580 P4760 P4950 FLEXI-COIL P SERIES AIR CARTS: REBORN AND RESETTING THE STANDARD DEDICATED. UNCOMPROMISED. SMART. NEW Flexi-Coil P Series air carts from New Holland are resetting
More informationJCB FASTRAC 3200/3230
FULLY SUSPENDED WITH 4 WHEEL ABS DISC BRAKING (TERRITORY DEPENDENT). JCB SMOOTHSHIFT TRANSMISSION. STATIC DIMENSIONS A B G H C D E F STATIC DIMENSIONS Tyres 540/65R30 495/70R24 A Height to exhaust 3.15
More informationNO-TILL DISC SEEDERS LINKAGE & TRAILING
NO-TILL DISC SEEDERS LINKAGE & TRAILING AUSTRALIAN DESIGNED & BUILT HIGH QUALITY SINGLE DISC SEEDERS NO-TILL SPECIALISTS www.serafinmachinery.com.au ULTISOW S RANGE Kadina SA Serafin Machinery s latest
More informationSpecialising in Grain Handling Equipment. Taking the strain from moving your grain
Specialising in Grain Handling Equipment Taking the strain from moving your grain 1 Australian made Contents Introduction 2 10 Transportable Augers with Hydraulic Mover 3 12 Transportable Out Loading Auger
More informationT1200 SERIES DIRECT DRILL PLANTER
T1200 SERIES DIRECT DRILL PLANTER And... best of all - THE Sure strike is Australian DESIGNED AND manufactured BY Gyral IMPLEMENTS Gyral - THE FIRST AIR SEEDER IN THE WORLD When Albert Fuss invented and
More informationSTATE OF MINNESOTA PRICING Page % DISCOUNT
TRAILERS: DUMP BODY, LOWBOYS, FLATBED, TAG, SLIDE AXLE, UTILITY, GOOSENECK, ENCLOSED, ETC. Vendor Name: Truck Utilities Inc Contact Person: Paul Warner Street Address: 2370 English Street P.O. Box: City,
More informationAll machines one language
All machines one language Soil tillage Electronics Sowing Intelligent crop production F ertilisin g El e c t r o n ic s Pla nt prote ctio n AMATRON + is the universal operator platform for all my AMAZONE
More informationQuick Setup Guide for IntelliAg Model YP Air Pro
STEP 1: Pre-Programming Preparation: The Quick Guide assumes the Virtual Terminal, Master Switch, Working Set Master, Working Set Member, and all sensors have been connected and properly installed. Reference
More informationTULIP MULTIDISC - Australia Disc Harrow
- Australia Disc Harrow www.lely.com innovators in agriculture Tulip Multidisc Standard The Tulip Multidisc standard series feature 510mm diameter discs and an 800mm clearance between the two disc gangs
More informationEvaluation Report 684
Alberta Farm Machinery Research Centre Printed: September, 1992 Tested at: Lethbridge ISSN 0383-3445 Group 9 (c) Evaluation Report 684 Morris 6130 Air Seeder A Co-operative Program Between ALBERTA FARM
More informationPS SERIES PNEUMATIC SEEDERS UNRIVALED PRECISION GLOBALLY ACCLAIMED PNEUMATIC SEEDERS TO COMPLIMENT ANY TASK
PS SERIES PNEUMATIC SEEDERS UNRIVALED PRECISION GLOBALLY ACCLAIMED PNEUMATIC SEEDERS TO COMPLIMENT ANY TASK Item Number 00210-3-268, Version 1.1 EN US PS SERIES PNEUMATIC SEEDERS APV PNEUMATIC SEEDER OPERATIONS
More informationFASTRAC 3200/3230 XTRA
ABS BRAKING FULLY SUSPENDED WITH 4 WHEEL ABS DISC BRAKING (TERRITORY DEPENDENT). JCB P-TRONIC TRANSMISSION. A B G H C D E F STATIC DIMENSIONS Tyres 540/65R30 495/70R24 A Height to exhaust 3.17 (10-5) 3.09
More informationLightning Fast Unloading Built on a Tradition of Value!
PARKER CORNER-AUGER GRAIN CARTS Lightning Fast Unloading Built on a Tradition of Value! Farmers have relied on Parker products to meet their grain handling needs for over 50 years. The latest generation
More informationAGRICULTURAL SPRAYERS
AGRICULTURAL SPRAYERS Innovative Products, Features, and Solutions CropCare s well-built equipment is engineered with simple reliability, while still offering the latest features and technology available.
More informationQuick Setup Guide for IntelliAg Model YP40 20 Air Pro
STEP 1: Pre-Programming Preparation: The Quick Guide assumes the Virtual Terminal, Master Switch, Working Set Master, Working Set Member, and all sensors have been connected and properly installed. Reference
More informationBertolini Sprayer Operator s Manual
Bertolini Sprayer Operator s Manual To ensure safe and efficient use of your new Bertolini Sprayer Please read manufacturer s operator s manual BEFORE operating sprayer. Failure to do so will void warranty
More informationFIRE KNAPSACK FIRE RESPONSE UNITS FIRE TRAILERS. Fire Fighting. Pages Designed to perform better.
FIRE KNAPSACK FIRE RESPONSE FIRE TRAILERS Fire Fighting 4 Pages 120-130 Designed to perform better. FASTFLO KNAPSACK FIRE FIGHTER HIGHLY EFFICIENT PORTABLE FIRE FIGHTERS Fast & consistent flow from double
More informationSprayer Control. Manual for SprayLink Cable Installations. Tank. Jet Agitator. Agitator Valve. Diaphragm Pump. Pressure Transducer.
Sprayer Control Plumbing & Installation Manual for SprayLink Cable Installations Tank Jet Tank Shut-Off Diaphragm Pump Electric Ball s Transducer Strainer Relief Regulating Copyrights 2012 TeeJet Technologies.
More informationFLEXI-COIL GIVING YOU WHAT YOU NEED
SEEDING FOR SUCCESS 2 3 INDEX 4-7 Flexi-Coil - Giving you what you need 8-11 Precision Agriculture 12-13 Air Carts 14-15 40 Series Air Carts 16-17 50 Series Air Carts 18-21 Precision Cultivators - ST820
More informationEND WHEEL NO- TILL 706NT & 1006NT
END WHEEL NO- TILL 706NT & 1006NT DRILL MAINTENANCE Proper servicing and adjustment is the key to the long life of any farm implement. With careful and systematic inspection of your grain drill, you can
More information& Tower for PWM Control. Maximum Application Rates with Two 5.3 GPM Electric Pumps
396-001060 Tower Electric Pump Fertilizer System for John Deere GS2 2600 & GS3 2630 & Tower for PWM Control Maximum Application Rates with Two 5.3 GPM Electric Pumps Maximum Application Rates in GPA on
More informationAGRICULTURAL SPRAYERS
AGRICULTURAL SPRAYERS Innovative Products, Features, and Solutions CropCare s well-built equipment is engineered with simple reliability, while still offering the latest features and technology available.
More informationAgXcel GX5 Install Guide for Integration into Trimble. where precision meets the soil... PO Box 1611 Kearney, NE
where precision meets the soil... AgXcel GX5 Install Guide for Integration into Trimble PO Box 1611 Kearney, NE 68848 877.218.1981 www.agxcel.com where precision meets the soil... AgXcel Integration into
More informationDISCOUNT TRACTOR PARTS.
HYDRAULIC PRODUCT CATALOGUE Published September 2012 Hydraulic Rams, Control Valves, Hydraulic Hose Reusable Hydraulic Fittings Hydraulic unions and Fittings Hydraulic Pumps DISCOUNT TRACTOR PARTS www.discounttractorparts.co.nz
More informationINSTALLATION MANUAL. Installation Details Warranty Wolfen Folding Shower Seat 600mm Wolfen Folding Shower Seat 960mm
INSTALLATION MANUAL 9505996 Wolfen Folding Shower Seat 600mm 9505997 Wolfen Folding Shower Seat 960mm Installation Details Warranty Delivering unrivalled quality Designed for absolute performance, Wolfen
More informationISOBUS Down Force Hydraulics Kinze
Important Notices Please carefully follow these step-by-step instructions. If you have questions, contact at 515-232-5363 x 1. Direction words (LEFT and RIGHT) are commonly used when describing an installation
More informationtRIPr Chief Grain Cart. Operator s Manual. Operator s Manual
125-000-01 125-000-01 1tRIPr 1tRIPr Operator s Manual 1210 Chief Grain Cart Operator s Manual Operator s Manual TO THE DEALER Predelivery/Delivery Checklist 1210 Grain Cart PREDELIVERY/DELIVERY CHECKLIST
More informationSPECIFICATIONS HEAVY DUTY C WITH TRACTION, DOUBLE GUN Stainless Steel Tank, Non-Bleeder/Flush Part Number: PO-HDCT-2-SS
SPECIFICATIONS HEAVY DUTY C WITH TRACTION, DOUBLE GUN Stainless Steel Tank, Non-Bleeder/Flush Part Number: PO-HDCT-2-SS GENERAL These specifications cover the minimum specifications of a self-propelled,
More informationOperator s Manual 09PDMS (100 Lb.) & P45PDMS (45 Lb.) Poly Stainless MP +3 (Positive Displacement Metering System)
Operator s Manual 09PDMS (100 Lb.) & P45PDMS (45 Lb.) Poly Stainless MP +3 (Positive Displacement Metering System) Anertec & Gandy Company 815 Rice Lake Street Owatonna, MN 55060 Telephone: 507-451-5430
More informationPneumatic fertiliser spreader
Working width up to 36 m Pneumatic fertiliser spreader + + + ISOBUS + + + Section Control + + + Distance Control + + + FreeLane + + + Future-proof and precise fertilising technology Increased profitability
More informationSEED & FERTILIZER SPREADERS
SEED & FERTILIZER SPREADERS HIGHLY ACCURATE EXTREMELY VERSATILE Advanced Seed, an Australian owned company, specializes in the wholesale supply of grass seed. The business has origins in Australia as far
More informationModel KD 710 KD 712 KD 714 Spare Parts List
Model KD 710 KD 712 KD 714 Spare Parts List Part No. KD1570063 From Serial No. CONTENTS Page No.. Contents... 2 Ordering Replacement parts... 3 Axle & Wheel... 4 Auger & Transmission... 6 2 Speed Gearbox...
More informationEvaluation Report 735
Alberta Farm Machinery Research Centre October 1998 Tested at Lethbridge AFMRC File EL495 ISSN 383-3445 Group 9(c) Evaluation Report 735 FLEXI-COIL 172 AIR CART A Co-operative Program Between ALBERTA FARM
More informationNational Luna - Electrical Accessories
National Luna - Electrical Accessories Mega Fuse Kit Fuse Holder & Distribution Point Supplied with 2 x 100amp Mega Fuses (Accepts any Mega Fuse 35-125 amps) Includes Lugs and Nuts Mega Fuse & Distribution
More informationOutline diagram. Hopper. Seed drill. Ground. Work Frame. Supporting Frame. Platform. Wheel. Drawbar. 3P Hitch. Camera. Straw Divider.
Machine components Fan Drive shaft connection Platform Hopper Seed Bout Marker Camera Drawbar Supporting Work Frame Monitor Following Harrow Wheel Frame Outline diagram Hopper Seed drill Ground Work Frame
More informationBreviglieri Product Guide
Breviglieri Product Guide QUALITY INNOVATION RELIABILITY silvan.com.au Rotary Hoe CHOOSING THE RIGHT ROTARY HOE Silvan s Brevi range offers features that will individualise a rotary hoe to your specific
More informationWhatever the crop and wherever you need to move it, Brandt has an auger that s right for you. Brandt Augers are fast, reliable, and longer lasting to
Augers Whatever the crop and wherever you need to move it, Brandt has an auger that s right for you. Brandt Augers are fast, reliable, and longer lasting to get you through harvest worry free. Standard
More informationPurpose Built for Precision Spreading.
Purpose Built for Precision Spreading. FERTILIZER / LIME / GYPSUM / MANURE PRECISION SPREADERS Agri-Spread spreaders provide an advanced, precise solution to spreading. With a well-built body and impressive
More informationFERTILIZER SPREADER WITH D.P.A. - FORWARD SPEED CALIBRATION
FERTILIZER SPREADER WITH D.P.A. - FORWARD SPEED CALIBRATION Crono answers the basic needs of today s farming: FERTILIZING WITH GAIN LONG LIFE AVOIDING TECHNICAL ASSISTANCE EASY USE VIBRO SYSTEM Without
More informationProduct Catalogue. Version
Product Catalogue Version 1.0-2017 sales@lionforgeindustries.com An Introduction to Simplement The Simplement System is our Patent Pending receiver/hitch unit and modular implement system. This product
More informationDisplay Quick Reference Guide
Display Quick Reference Setup Summary Universal Terminal Camera Operating Configuration Selection Tillage Planting Application Harvest Water Management Guidance Case IH MX 290, 24r Equipment Name Vehicle
More information64 Basedow Rd Tanunda South Australia 5352 (08)
64 Basedow Rd Tanunda South Australia 5352 (08) 8563 3959 WWW.VINETECH.COM.AU Having grown rapidly, Vinetech have had to meet customer demands and are now proud to be on board with Deutz-Fahr Tractors.
More informationWicked Warrior Tandem Utility Disc
Wicked Warrior Tandem Utility Disc From aggressive tillage to no-ridge soil finishing, the Wicked Warrior is the answer. FEATURES The Wicked Warrior is the ideal choice for residential gardens, commercial
More informationDISCOUNT TRACTOR PARTS
DISCOUNT TRACTOR PARTS Parts catalogue Ford 2000, 3000, 3600, 3900 Ph 0800 872272 www.discounttractorparts.co.nz email sales@discounttractorparts.co.nz Front Axle King pin LH/RH $133.30 per side Spindle
More informationThe Mitsubishi Motors Australian International 3 Day Event Marketplace
14 to 17 November 2019 The Mitsubishi Motors Australian International 3 Day Event Marketplace Australia s premier equestrian event, The Mitsubishi Motors Australian International 3 Day Event is on again
More informationNEW HOLLAND SERIES TT
NEW HOLLAND SERIES TT TT55 TT75 THE NEW HOLLAND BRAND. MODERN STYLE AND GREAT DYNAMICS Comfort to enhance productivity A general-purpose tractor needs to satisfy differing demands. During some operations
More informationTillage System Model 46 Assembly Manual
46 Tillage System Model 46 Assembly Manual Revision E - September 2018 Fall Build Serial Number: Kelly Engineering PO Box 100 Booleroo Centre South Australia 5482 P +61 8 8667 2253 F +61 8 8667 2250 W
More informationPoly-Stainless MP+3 Multi-Purpose Applicator
Poly-Stainless MP+3 Multi-Purpose Applicator Fertilize, seed or apply granular chemicals with just one applicator. Comes with three sets of Full-Rate metering wheels. Standard Equipment: 2.3 cu.ft (140
More informationAPPLICATION EQUIPMENT. Fertilizer Applicators High-Clearance Sprayers Liquid Supply Trailer
APPLICATION EQUIPMENT Fertilizer Applicators High-Clearance Sprayers Liquid Supply Trailer Farm King Application Equipment: Fertilizer Applicators, High-Clearance Sprayers, Liquid Supply Trailer FARM KING
More informationLOFTNESS.COM or call
Loftness FertiLogix products are engineered for longevity and peace of mind. Because of the corrosiveness of fertilizer, stainless steel is used anywhere fertilizer comes in consistent contact. Loftness
More informationNO-TILL SPECIALISTS NO-TILL DISC SEEDERS LINKAGE & TRAILING AUSTRALIAN DESIGNED & BUILT SINGLE & DOUBLE DISC SEEDERS & BARS
NO-TILL SPECIALISTS NO-TILL DISC SEEDERS LINKAGE & TRAILING AUSTRALIAN DESIGNED & BUILT SINGLE & DOUBLE DISC SEEDERS & BARS wwwserafinmachinerycomau ULTISOW S Range ULTISOW S30 S40 S50 S60 ROW UNITS Standard
More informationELGIN SWEEPER IS YOUR PARTNER... Road Wizard
Road Wizard ROAD WIZARD BUILT FOR THE MOST DEMANDING JOBS, DESIGNED TO BE THE LEAST DEMANDING TO OPERATE. The Elgin Road Wizard has been redesigned and improved, retaining all of the features that made
More informationPNEUMATIC SEED DRILLS SOLITAIR
PNEUMATIC SEED DRILLS SOLITAIR 2 Versatile Cultivation Methods Depending on the previous crop, crop rotation, weather and harvest conditions, switching over from conventional to conservation tillage methods
More informationFLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES
FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES Name of Dealership Type of Vehicle Zone REGENERATIVE AIR STREET SWEEPER (Specification #54) Base Unit Price Environmental Products Group,
More informationMT900B MT900B. MT900B hp
430-570 hp Series Introducing the Series - the new articulated 4-wheel drive tractor from Challenger. The name Challenger, synonymous with high horsepower machinery, is shaking up the tractor market yet
More informationInnovation... Refined! Lower profile, gentler conveyor design for easier, smoother self-filling and unloading
Bulk Seed Handling Seed Runner self-filling seed tender Innovation... Refined! Lower profile, gentler conveyor design for easier, smoother self-filling and unloading Models 3955XL, 3755XL, 3755, 2755XL,
More informationEvaluation Report 658
Alberta Farm Machinery Research Centre Printed: November, 1991 Tested at: Lethbridge ISSN Group 9 (c) Evaluation Report 658 Bourgault 2155 II Air Seeder A Co-operative Program Between ALBERTA FARM MACHINERY
More informationTWIN-ROW PLANTERS TWIN-ROW 825A3PM
TWIN-ROW PLANTERS TWIN-ROW 4025A3PS TWIN-ROW 1225 & 1625AFF TWIN-ROW 825A3PM DOUBLE DOWN ON NEW TECHNOLOGY WITH CASE IH TWIN-ROW PLANTERS Farming is a gamble. But there are ways to cut your risk, improve
More informationQuick Setup Guide for IntelliAg Model 3PYP 12 Row Single Row Air Pro
STEP 1: Pre-Programming Preparation: Power on vehicle via ignition switch to activate Virtual Terminal (VT). Main menu will display pre-programmed default settings. If errors are detected (e.g., failed
More information2 in 1. Welcome to our new world. SprayRider 35. Introducing the new. DECEMBER 2010 JANUARY 2011
DECEMBER 2010 JANUARY 2011 Welcome to our new world. Introducing the new SprayRider 35 2 in 1 FREE PHONE 0800 230 230 Pricing valid to 31 January 2011. Available from participating C-Dax dealers only.
More informationSeed Rate Controller Operators Manual
Seed Rate Controller Operators Manual Part Number A2678 Rev. 1.41 Copyright Topcon Precision Agriculture December, 2007 All contents in this manual are copyrighted by Topcon. All rights reserved. The information
More informationSUPERSPRAYERS ULTIMATE NT & ULTRA ULTIMATE NT
SUPERSPRAYERS ULTIMATE NT & ULTRA ULTIMATE NT Patent No. 6,293,475 & 7,669,789 Illustrations may show optional equipment Hydraulic Boom Height Hydraulic Tip Lift Hydraulic Fold Narrow Cart Ultra Ultimate
More informationDAF MULTISUPPORT. More than just Repair & Maintenance
DAF MULTISUPPORT More than just Repair & Repair and maintenance services customised to your business DAF MultiSupport provides a range of repair and maintenance service packages to increase uptime, control
More informationEndeavor Fertilizer Controler" Electric Pump Fertilizer System for John Deere GS2 with Servo Control
Endeavor Fertilizer Controler" Electric Pump Fertilizer System for John Deere GS with Servo Control We Can Also Interface with These Popular Third Party Controllers: Trimble - EZ Boom & Field IQ Ag Leader
More informationSpearhead TWIGA. TWIGA Reach Mower 555/600/655T/700T 555FR/600FR. Edition 2.5 June 2014 Part No
TWIGA Reach Mower 555/600/655T/700T 555FR/600FR Edition 2.5 June 2014 Part No. 8999057 0 Contents Ordering Your Parts 3 A Frame 4 Tank 6 Slew Post 8 Lift Frame 10 Tank Lid 12 Rear Panel 13 Stabiliser Brackets
More informationMECHANICAL SEED DRILLS SAPHIR
MECHANICAL SEED DRILLS SAPHIR Trend-setting seed drill technology High peak workloads are unavoidable in medium-sized agricultural companies, as well as larger ones. But such peaks can be absorbed with
More informationJOHN BERENDS IMPLEMENTS Pty. Ltd.
Product JOHN BERENDS IMPLEMENTS Pty. Ltd. AGRICULTURAL ENGINEERS (Incorporating Gibbins-Rawling) 130 Frankston-Dandenong Road, Dandenong South, Victoria 3175 Australia Phone (03) 9791 2494 Fax (03) 9794
More information+61 (0)
+61 (0) 2 6340 0400 www.k-line.net.au CONFIGURATION OPTIONS 3 Point Linkage, non-folding 2925DD 2985DDT Trailing unit, folding wings 2940DDF Operating widths: 2m (5 6 ) to 13m (43 ) Power Requirements:
More informationRETAIL DISTRIBUTOR CURT & BRENDA HOWARD 275 W HIGH STREET LONDON, OH PHONE: /16/16 FAX: Brownie PAGE 1 OF 16
INDEX Landscaping Grader Blades, Medium Duty Adjustable Angle...pg 2 Grader Blades, Three Point, Tilt & Angle...pg 2 Grader Blades, Three Point Slider...pg 2 Grader Blades, Three Point, Hydraulic Tilt
More informationROLABAR RAKES 57 I 256 I 258 I 260 I 216
ROLABAR RAKES 57 I 256 I 258 I 260 I 216 02 ROLABAR RAKE HERITAGE AND PERFORMANCE Pick up more of your valuable hay. Proven raking for 50 years and counting When something works well, it lives on! New
More informationEdition October 2014 Part No
Edition 1.3 - October 2014 Part No. 8999076 1 Contents Ordering Your Parts... 3 Centre Section - S180025.70... 5 Wing Section - S180025.71/72...7 Centre Axle - S180025.110... 9 Wing Axle - S180025.111...10
More informationFLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES
FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES Name of Dealership Type of Vehicle Zone 15 FT. FLEX WING ROTARY MOWER - PTO DRIVEN (Specification #17) Base Unit Price ALAMO INDUSTRIAL 2018
More informationDEERE-ORTHMAN DR SERIES PLANTERS
DR PlanterS DEERE-ORTHMAN DR SERIES PLANTERS All-New Max Emerge TM 5 Row Units For real planting performance, follow the leader in stacking technology. With features like an improved doubles eliminator,
More informationLELY Broadcast Spreaders
LELY Broadcast Spreaders Accuracy and Dependability www.lelyturf.com partners in turfcare Unmatched in versatility and dependability Lely broadcast spreaders are the world s most popular machines used
More informationDirections for use VIBRO FLEX 7400
Directions for use VIBRO FLEX 7400 Contents Introduction... 3 Identification... 3 Explanation of symbols... 4 Safety... 5 General safety advice... 5 Coupling and uncoupling... 5 Three-point hitch or linkage...
More informationDiscount Tractor Parts Ph FORD 4000 Parts Catalogue Published July 2012
Discount Tractor Parts Ph 0800 872272 www.discounttractorparts.co.nz FORD 4000 Parts Catalogue Published July 2012 Discount Tractor Parts 7 Airdrie Rd., Box 70059, Ranui, Auckland Ph 0800 872 272 09 8337483
More informationMachinery Cost Estimates: Field Operations
Machinery Cost Estimates: Field Operations Department of Agricultural and Consumer Economics College of Agricultural, Consumer and Environmental Sciences University of Illinois at Urbana-Champaign MACHINERY
More informationModule 13 Rate-controller functions and settings Getting the best out of the functions available
SPRAY APPLICATION MANUAL FOR GRAIN GROWERS Module 13 Rate-controller functions and settings Getting the best out of the functions available Graham Betts and Bill Gordon PAGE 2 Key points A rate controller
More information4000/5000/6000/ 7000 Series SERIES TELESCOPIC & SWING AWAY GRAIN AUGERS
4000/5000/6000/ 7000 Series SERIES TELESCOPIC & SWING AWAY GRAIN AUGERS Take the "hard" out of the hard work with GrainMaxx Telescopic & Swing Away Grain Augers Take the "hard" out of the hard work with
More informationWIRELESS BLOCKAGE MONITOR OPERATOR S MANUAL
WIRELESS BLOCKAGE MONITOR OPERATOR S MANUAL FOR TECHNICAL SUPPORT: TELEPHONE: (701) 356-9222 E-MAIL: support@intelligentag.com Wireless Blockage Monitor Operator s Guide 2011 2012 Intelligent Agricultural
More informationMaritime New Zealand Guidelines
Maritime New Zealand Guidelines MARINE GUIDANCE NOTICE ISSUE 02-2007 VEHICLE REQUIREMENTS FOR SHIPMENT BY RO-RO This guidance is for: Any person who offers vehicles for carriage by a ro-ro ship Ro-ro ship
More informationTrailed Sprayers. Knight Farm Machinery is based in the rural county of Rutland at the heart of the UK arable farming area.
Since its formation in 1984 Knight Farm Machinery has become one of the UK s leading manufacturers of crop sprayers and cultivation equipment, combining reliability and practicality with a high degree
More informationFORDSON TRACTOR REPLACEMENT PARTS CATALOGUE DISCOUNT TRACTOR PARTS. Ph
FORDSON TRACTOR REPLACEMENT PARTS CATALOGUE DISCOUNT TRACTOR PARTS Ph 0800 872 272 Email sales@discounttractorparts.co.nz All prices listed are plus GST and subject to change 7B Manga Rd, Silverdale Water
More informationSPECIFICATIONS FOR A HEAVY DUTY C W/ TRACTION
SPECIFICATIONS FOR A HEAVY DUTY C W/ TRACTION Stainless Steel Tank, Non-Bleeder/Flush Part Number: PO- (air actuated traction drive) Part Number: PO-Hydro-SS (hydrostatic wheel drive) GENERAL These specifications
More information