Thru Tubing Gun Systems. Expendable Strip /8 Carrier (ESC) /8 RDX - HMX x x x x

Size: px

Start display at page:

Download "Thru Tubing Gun Systems. Expendable Strip /8 Carrier (ESC) /8 RDX - HMX x x x x"

Judith Chapman
5 years ago
Views:

1 Services Gun Shot Coiled Phasing Density Gun Size Explosive Tubing Slick Line Tubing Wireline Deep Big Hole Gun Type (Degrees) (SPF)Max (inches) Type Conveyed Conveyed Conveyed Conveyed Penetrating Thru Tubing Gun Systems Expendable Strip /8 Carrier (ESC) /8 RDX - HMX x x x x Retrievable Tubing /8 RDX - HMX x x x x x x Gun System (RTG) 2-1/2 PYX Formed Wire (FWC) /8 RDX - HMX x x x x Link System /16 RDX - HMX x x x x Carrier (LJC) /8 Swing Jet Carrier /8 RDX - HMX x x (SJC) 2-1/8 Bi-Wire Carrier /16 RDX - HMX x x x x (BWC) 2-1/8 Casing Gun Systems Ported Hollow Steel /8 5 RDX - HMX x x x x x Carrier (PHSC) PYX Expendable Hollow /8 7 RDX - HMX x x x x x Steel Carrier (EHSC) PYX 160

2 Bar Activated Vent Assembly; 2-7/8 EUE BAV was developed to be the primary underbalance valve in drop bar TCP operations. Designed to operate off of rathole hydrostatic, the BAV operates independently from tubing hydrostatic pressure. Benefits BAV can be operated with dry tubing Does not reduce drop bar velocity Can be run with any packer Once vent opens, BAV is locked in place Specifications O.D cm I.D cm Thread Conn. 2-7/8 EUE Make-up Length cm Max. Hydrostatic 20,000 PSI MPa Max. Differential 10,000 PSI 68.9 MPa Min. Hydrostatic 500 PSI 3.5 MPa Tensile >P

3 Shogun Spiral Strip System Deep Penetrator & Big Hole Spiral Shogun, when combined with the new Shogun N.T. Charge, possesses the three most important features of an ideal perforator Ideal Phasing, Deep Penetration, and High Shot Density. Benefits 6 spf in 1-11/16 & 2-1/8 versions N.T. Shogun charge shoots 40% better than standard Shogun DP charge 40 & 60 Phasing available Specifications O.D. 1-11/16 2-1/8 2-1/2 Min. Restriction 1-25/32 2-3/ /32 Pressure Rating* 20,000 PSI Temperature** 375 F * Shogun N.T. Charge ** HNS/Nona Charge Capable of 450 Available 2000

4 Scalloped Gun System Charge Performance Summary API, RP-43 5th Edition Data API RP-43 Fifth Edition Gun O.D. Charge Shot Charge P/N Expl. 1-hr Casing Section 1 Type (in.) Type Density (spf) Wt. (g) Temp. O.D. (in.) (concrete target) Rating ( F) Entry Penetration Hole (in.) (in.) Scalloped 2-7/8 SDP 6 TAG Gun 2-7/8 DP 6 TAG LD Systems 2-7/8 BH 6 TAG /8 BH 6 TAG LD /8 DP 6 HSC T /8 DP 9 HSC A /8 BH 9 HSC A /8 BH 12 HSC A /8 DP 5 TAG NT /8 DP 4 TAG /8 DP 6 HSC T /8 DP 6 HSC /8 DP 6 HSC /8 DP 6 HSC ZT /8 GH 6 HSC GH /8 BH 6 HSC LD /8 BH 6 HSC /8 BH 12 HSC A SDP 4 TAG DP 5 TAG DP 6 TAG DP 5 HSC DP 6 HSC T DP 6 HSC DP 6 HSC DP 9 HSC BH 9 HSC BH 5 HSC /2 SDP 5 SDP /2 SDP 5 TAG /2 DP 5 TAG /2 DP 6 TAG /2 DP 5 HSC /2 DP 12 HSC T /2 DP 12 HSC /2 BH 5 HSC /2 BH 12 HSC /2 GH 12/16 TAG GH /2 BH 12 HSC LD /2 BH 12/16 TAG /2 BH 12/16 TAG ZF /2 BH 24 TAG Unofficial Data (361)

5 Scalloped Gun System Charge Performance Summary API, RP-43 5th Edition Data API RP-43 Fifth Edition Gun O.D. Charge Shot Charge P/N Expl. 1-hr Casing Section 1 Type (in.) Type Density (spf) Wt. (g) Temp. O.D. (in.) (concrete target) Rating ( F) Entry Penetration Hole (in.) (in.) Scalloped 4-5/8 BH 12 LS HSC Gun 4-5/8 BH 24 TAG Systems 5-1/8 DP 5 TAG /8 DP 6 TAG /8 DP 5 HSC /8 DP 12 HSC T /8 DP 12 HSC /8 BH 12/16 TAG /8 BH 12 TAG ZF /8 BH 12 HSC LD /8 GH 12/16 TAG GH SDP 12 TAG DP 12 TAG BH 12/16 TAG BH 12/16 TAG LD BH 12 TAG Z BH 12 TAG Z Unofficial Data (361)

6 Through Tubing Charge Performance Summary API, RP-43 5th Edition Data API RP-43 Fifth Edition Gun O.D. Charge Shot Charge P/N Expl. 1-hr Casing Section 1 Type (in.) Type Density (spf) Wt. (g) Temp. O.D. (in.) (concrete target) Rating ( F) Entry Penetration Hole (in.) (in.) Swing Jet II 1-3/8 x Systems 3-3/4 DP 4.9 STK SJ /16 x 3-7/8 DP 4.4 STK NTX /8 x 5-3/8 DP 3.5 STK SJ Shogun 1-5/8 DP 6 STP Systems 1-11/16 SDP 6 STP NTX /16 SDP 6 STP NT /16 DP 6 STP E /16 BH 6 STP NB /16 BH 6 STP BH DP 6 STP /8 SDP 6spf STP NTX o 2-1/8 SDP 6spf STP NT o 2-1/8 DP 6 STP E /8 BH 6 STP NB /8 BH 6 STP BH /2 SDP 4spf STP NT o 2-1/2 SDP 4spf STP NTX o 2-1/2 SDP 4spf STP NT o Bi-Wire 1-11/16 DP 4 BWC Systems 2-1/8 DP 4 BWC Formed Wire 1-11/16 DP 4 FWC Systems 2-1/8 DP 4 FWC Link 1-11/16 DP 4 LNK Systems 2-1/8 DP 4 LNK Retrievable 1-11/16 SDP 4 RTG NT Tubing Gun 1-11/16 DP 4 RTG Systems 1-11/16 BH 4 RTG BH /8 SDP 6 SDP NTX /8 SDP 4 RTG NT /8 DP 4 RTG /8 GH 6 RTG GH /8 BH 4 RTG BH /8 SDP 4 TAG NT /8 DP 4 TAG BH /2 SDP 6 TAG NT /2 SDP 4 RTG /2 DP 6 RTG Unofficial Data (361)

7 Time vs. Temperature Chart for Explosives Time (Hours) F (316 C) 575 F (302 C) PYX & NONA 550 F (288 C) 525 F (274 C) HNS 500 F (260 C) 475 F (246 C) 450 F (232 C) 425 F (218 C) 400 F (204 C) 375 F (191 C) HMX 350 F (177 C) 325 F (163 C) RDX 300 F (316 C) 275 F (135 C) This chart is intended for reference purposes only. Explosive systems ratings are developed on many factors. We recommend that the end user contact Wood Group Logging Services for technical assistance for the following conditions: TCP operations involving HNS or PYX explosives Exposed Wireline operations above 12,500 psi or 310 F Hollow Carrier wireline operations above 375 F 250 F (121 C) 225 F (107 C) 200 F (93 C) In any case, the end user must be able to satisfy himself to the suitability of any Wood Group product for a given condition. (361)

8 EFI Initiation System puts safety first when it comes to electrical detonation systems for downhole operations. The Safety Interlock TM EFI System is the only electrical system on the market that eleminates the Human Error Factor. Benefits No Shut Down of Normal Rig Activity Impact Insensitive RF (EMI), ESD, Stray Current Safe (AC & DC) Cannot be fired without Electronic Controller No Primary or Sensitive Explosives 400 o Temperature Rating for 24 Hours 25k PSI Maximum Pressure 2000

9 With Pressure Tool CENTER OF COIL PRESSURE SUB PLUG 9.74 PWP tool measures gamma rays, temperature of the well and bottom hole pressure during perforating operations. The PWP saves valuable time and reduces frequency of wireline trips. Specifications 1-11/16 PERFORATING GAMMA PRESSURE TEMPERATURE Tool Diameter 1 11/16 Length Weight Temperature Rating Pressure Rating Operating Voltage (Gun fires on negative voltage) 35 lbs. 350 F 18,000 PSI 120 VDC, Scint/Press/Temp CENTER OF DETECTOR Logging Speed/Time Constant 10 ft./min. - 6 sec. 20 ft./min. - 3 sec. 30 ft./min. - 2 sec Scintillation and Geiger Gamma Rays Available Scintillation Shown 2000

10 Pressure Activated Time Delay Firing System High Pressure Time Delayed Firing Head (TDF) permits underbalance perforating through the use of a pressure actuated firing head employing a time delay fuse. The use of the time delay allows for time (9-10 minutes) to bleed the actuating pressure off the tubing, to achieve the desired underbalance, prior to firing the guns. The system may also be used with perforate and stimulate TCP to adjust the overbalance prior to the guns firing. Benefits Independently perforate selected zones. Fire several guns independently during one trip Obtain maximum utilization of underbalance Not affected by annulus pressure; can be run in heavy mud systems Can be used with full/or non-full opening tools Multiple guns can be run without gun spacers to reduce costs The TDF is ideal for production completions, drill stem testing, dual completions, and coiled tubing operations Recommended for running on top and/or bottom of gun assemblies Time delay extensions may be added for additional time in 10 minutes intervals (for N 2 operations) Specifications O.D cm Make-up Length cm Max. Hydrostatic 20,000 PSI MPa Min. Hydrostatic 2,000 PSI 13.8 MPa 2000

11 Differential Firing Head Assembly Differential Firing Head DFH was developed to allow low pressure actuation of TCP Guns. Benefits Underbalance perforating in horizontal wells without a packer Pressure balanced when run in hole for improved safety & reliability Can be adapted to run as an annulus pressure operated firing head using Packer Bypass System Can be run with Bar Activated Vent to open vent when firing Can be utilized with Time Delay fuses to provide time to reduce applied pressures. Specifications O.D cm Make-up Length cm Max. Hydrostatic 20,000 PSI MPa Max. Differential 12,500 PSI 86.1 MPa Min. Hydrostatic 250 PSI 1.7 MPa 2000

12 Redundant Annulus Pressure Firing System Redundant Annulus Pressure Firing System (R-APF) was designed to allow underbalance perforating for shoot and pull applications. The R-APF accomplishes this by using differential pressure across the packer to actuate the firing mechanism. Utilized with Packer Bypass system. Benefits Full bore design Can be used with any other Firing Head on top of the R-APF Can be used for Drill Stem Testing (DST) and shoot and pull applications Ideal for deviated wells Specifications O.D cm Make-up Length cm Max. Hydrostatic 20,000 PSI MPa Max. Differential 10,000 PSI 68.9 MPa Min. Hydrostatic 250 PSI 1.7 MPa 2000

Detonating Cords HNS 40 GRAINS/FT LEAD JACKET - ENSIGN-BICKFORD. in. 7 in. Gun Systems

Detonating Cords HNS 40 GRAINS/FT LEAD JACKET - ENSIGN-BICKFORD. in. 7 in. Gun Systems Appendix A Detonating Cords RDX 40 GRAINS/FT FLAT, RIBBON 100000149 RDX 40 GRAINS/FT LS / NYLON JACKET - ENSIGN BICKFORD 101208988 RDX 40 GRAINS/FT LS / NYLON JACKET - ENSIGN BICKFORD - EB AIR PACK HMX