Hoval Belaria SRM (4-16) Hoval Belaria compact SRM (4-16) Air/water heat pump

Size: px

Start display at page:

Download "Hoval Belaria SRM (4-16) Hoval Belaria compact SRM (4-16) Air/water heat pump"

Laura Henderson
5 years ago
Views:

Air/water heat pump Description Hoval Belaria SRM Hoval Belaria compact SRM Modulating heat pump system for heating and cooling in the living area Split system comprising inside unit and outside unit.

Condenser stainless steel/cu Expansion tank 10 litres Pressure gauge Flow sensor (included separately) Emergency heating SRM (4) 3 kw SRM (6-16) 3/9 kw (see also technical data) with safety thermo-

1 Air/water heat pump Description Hoval Belaria SRM Hoval Belaria compact SRM Modulating heat pump system for heating and cooling in the living area Split system comprising inside unit and outside unit. Modulation range 30% to 100% Inside unit Belaria SRM Compact unit for wall installation steel. Colour pure white (RAL 9010). Condenser stainless steel/cu Expansion tank 10 litres Pressure gauge Flow sensor (included separately) Emergency heating SRM (4) 3 kw SRM (6-16) 3/9 kw (see also technical data) with safety thermo- function (operating unit included separately) cycle Switch control box Flow and return sensor installed Belaria compact SRM inside unit steel. Colour RAL 9010 (pure white). Condenser stainless steel/cu compact SRM (4) 180 litres compact SRM (6-16) 260 litres Expansion tank 10 litres Pressure gauge Flow sensor (included separately) Emergency heating compact SRM (4) 3 kw compact SRM (6-16) 3/9 kw (see also technical data) with safety thermo- function (included separately) cycle Switch control box Flow and return sensor installed Outside unit Compact unit for outdoor installation Speed-controlled compressor 1 / 2 speed-controlled fans Filled with refrigerant R 410 A Outside unit Hoval Belaria SRM Hoval Belaria compact SRM Heat output Cooling capacity type with A-7W35 with A2W35 with A35W18 kw kw kw (4) (6) (8) (11) (14) (16) Tests Outdoor sensor installed Condensate drip tray heating installed on SRM (11-16) compact SRM (11-16) Connections, heating/cooling Heating connections SRM (4-16) bot- compact SRM (4-16) top Connections, refrigerant line Inside unit Belaria inside unit Belaria compact SRM (4-16) top Outside unit on the right side liquid line: Belaria Condensate drain Free run-off of the condensate for draining off An optional condensate drip tray for collec- Inside unit SRM SRM (6) Test number WPZ-LW SRM (14) Test number WPZ-LW SRM (16) Test number WPZ-LW Inside unit compact SRM Electrical connections Outside unit on the right side connection: Belaria Belaria Inside unit is fed from the outside unit Emergency heating is connected to the inside unit separately Electric heating element connection in the SRM (4-16)) Delivery separately. with the inside unit. Sensor for calorifier supplied loose in the inside unit (Belaria SRM (4-16)). On site Installation of the insulation set SRM) Wall openings for refrigerant connecting lines. Electr. connecting line outside/inside unit. 3

Part No. Hoval Belaria SRM Hoval Belaria compact SRM air/water heat pump system Part No. Modulating heat pump system for heating and cooling. Comprising inside and outside unit.

2 Part No. Hoval Belaria SRM Hoval Belaria compact SRM air/water heat pump system Part No. Modulating heat pump system for heating and cooling. Comprising inside and outside unit. Belaria compact SRM with integrated calori- Hoval Belaria SRM Heat pump system Type Heat output Cooling capacity kw kw A-7W35 A2W35 A35W18 (4) (6) (8) (11) (14) (16) Hoval Belaria compact SRM Heat pump system with Type litres Heat output kw A2W35 Cooling capacity kw A35W18 (4) (6) (8) (11) (14) (16) Connection set for Belaria SRM (11-16) pump on the heating network Consisting of: 2 pcs. seals

the unit (cable connection) 6031 248 Room thermostat with remote control RS-W (cable

additional outside temperature sensor necessary if the outside unit is placed (exposure to

Demand board (A8P) for external power limitation 4 inputs Limitation of current (A) or power

for Belaria compact SRM (4-16) and SH (11-16) for collection of the condensate under the

3 Part No. Accessories Room station Additional controller as room station same function as controller on the unit (cable connection) Part No Room thermostat with remote control RS-W (cable connection) RS-R (with radio transmission) Outside temperature sensor additional outside temperature sensor necessary if the outside unit is placed (exposure to sunlight) Additional board (A4P/A7P) digital on/off board for: - alarm output Demand board (A8P) for external power limitation 4 inputs Limitation of current (A) or power (kw) External control heating/cooling and On/Off Condensate drip tray for outside unit for Belaria compact SRM (4-16) and SH (11-16) for collection of the condensate under the outside unit Condensate outlet: Ø (outside) 38 mm mm in addition Trace heating tape for heating a condensate drainage pipe (on site) with thermostat Length: cable 1 m; heating tape 3 m

Part No. Part No. Protective roof for outside unit for Belaria Powder-coated sheet steel Colour: silk grey RAL 7044 Also combinable with wall console for outside unit.

7006 360 Protective grid for outside unit for Belaria SRM and compact SRM (4-8) sturdy grid for protection Mounting on site 6031 613 Protective grid for outside unit for Belaria compact SRM (11-16)

243 Wall console for outside unit for attachment of the unit to the wall 2 brackets made of steel sheet fixing material Attention: Cannot be used in this form on insulated walls!

4 Part No. Part No. Protective roof for outside unit for Belaria Powder-coated sheet steel Colour: silk grey RAL 7044 Also combinable with wall console for outside unit Protective roof for outside unit for Belaria compact SRM (11-16) and SH (11-16) Powder-coated sheet steel Colour: silk grey RAL 7044 Also combinable with wall console for outside unit Protective grid for outside unit for Belaria SRM and compact SRM (4-8) sturdy grid for protection Mounting on site Protective grid for outside unit for Belaria compact SRM (11-16) and SH (11-16) sturdy grid for protection Mounting on site Protective grid for outside unit for Belaria compact SRM (11-16) and SH (11-16) sturdy grid for protection Mounting on site Wall console for outside unit for attachment of the unit to the wall 2 brackets made of steel sheet fixing material Attention: Cannot be used in this form on insulated walls! Not suitable for lightweight walls! Base for outside unit for Belaria SRM (4-8) and compact SRM (4-8) Consisting of: installation on concrete base (see base plans) Vibration damper for installing the unit on a concrete base (on site). washers and nuts

below +20 C 6031 249 Sludge separator with magnetic ring made from HDPE plastic Temperature range 0-90 C Max.

$glycol fraction: 30% manual air-bleeding 2054 376 For hot water production Motorised switch ball valves type R3.$

5 Part No. Accessories Insulation set (inside unit) for Belaria SRM (04-16) falling beneath the dewpoint in cooling mode with flow temperatures below +20 C Part No Sludge separator with magnetic ring made from HDPE plastic Temperature range 0-90 C Max. operating pressure: 3 bar Max. glycol fraction: 30% manual air-bleeding For hot water production Motorised switch ball valves type R3..BL/LR230A, NR230A Connections with internal thread Type DN Screw joint connection 1 R30-BL2/LR230A 10.0 R3032-BL3/NR230A Flow rate in m 3 /h with 100% opening and a pressure drop of 1 bar Circulation pumps, actuators, buffer storage tanks see separate brochures H A Ø D 10 bar. Ø D H h A type mm mm mm A h Services Commissioning condition for warranty. 7

6 Technical data Hoval Belaria SRM (4-16) Type SRM (4) SRM (6) SRM (8) SRM (11) SRM (14) SRM (16) Heat output A-7W35 1 kw Heat output A2W35 2 kw Heat output A10W35 2 kw COP A-7W COP A2W COP A10W Cooling capacity A35W18 1 kw Cooling capacity A35W7 1 kw EER A35W EER A35W Dimensions Outside unit H/W/D mm 735/832/ /900/320 Inside unit H/W/D Belaria SRM mm 890/480/344 Inside unit H/W/D Belaria compact SRM mm 1732/600/728 Weights Net weight of outside unit kg Net weight of inside unit Belaria SRM kg Belaria compact SRM kg Gross weight of outside unit kg Gross weight of inside unit Belaria SRM kg Belaria compact SRM kg Compressor kg Fan Condenser type Copper-soldered stainless steel plate heat exchanger Condenser water content litres R m 3 /h m 3 /h Max. operating pressure on the heating side bar litres Total water content Belaria SRM litres Total water content Belaria compact SRM litres compact SRM litres Max. hot water temperature C Operating pressure/test pressure bar 8/13 8/13 8/13 8/13 8/13 8/13 Stainless steel (EN ) Thermal insulation material EPS Standby losses (EN 12897) kwh/24 h Connection, refrigerant line Dimension of liquid line Inches/ 1/4 / 6.4 1/4 / 6.4 1/4 / 6.4 3/8 / 9.5 3/8 / 9.5 3/8 / 9.5 mm Dimension of gas pipe Inches/ 5/8 / /8 / /8 / /8 / /8 / /8 / 15.9 mm Max. length of refrigerant line m Min. length of refrigerant line m Max. height difference outside/inside unit Electrical data Max. power consumption during heating operation Heat pump kw Emergency heating kw 3 2 stage 3/9 2 stage 3/9 2 stage 3/9 2 stage 3/9 2 stage 3/9 Voltage Compressor x x x 400 Fan Emergency heating 230 Frequency Hz /- 10% +/- 10% +/- 10% +/- 10% +/- 10% +/- 10% Operating current max. Compressor A Starting current A Fuse A 16T 16T 16T 16T 16T 16T 1 2 Heat output and COP in partial load operation (EN 14511) 8

7 Technical data Diagrams of areas of application Belaria SRM (4-8) Belaria compact SRM (4-8) Heating Belaria SRM (11-16) Belaria compact SRM (11-16) Heating Flow Vorlauftemperatur temperature C C Performance Leistung nicht not guaranteed garantiert Flow Vorlauftemperatur temperature C C Performance Leistung nicht not garantiert guaranteed Outside Aussentemperatur temperature C Outside Aussentemperatur temperature C C 35 Belaria SRM (4) Hot water production Belaria SRM (6-8) Hot water production Flow Vorlauftemperatur temperature C C Performance Leistung nicht not guaranteed garantiert Flow Vorlauftemperatur temperature C C Performance Leistung nicht not guaranteed garantiert Outside Aussentemperatur temperature C Outside Aussentemperatur temperature C 35 Belaria SRM (11-16) Hot water production Flow Vorlauftemperatur temperature C C Outside Aussentemperatur temperature C 35 9

8 Technical data Belaria compact SRM (4) Hot water production Belaria compact SRM (6-8) Hot water production Hot Warmwassertemperatur water temperature C C Performance Leistung nicht not guaranteed garantiert Mit With eingebauter built-in electric Elektroheizung heater Warmwassertemperatur Hot water temperature C Performance Leistung nicht not guaranteed garantiert Mit With eingebauter built-in electric Elektroheizung heater Outside Aussentemperatur temperature C C Outside Aussentemperatur temperature C C 35 Belaria compact SRM (11-16) Hot water production Warmwassertemperatur Hot water temperature C C Mit With eingebauter built-in electric Elektroheizung heater Outside Aussentemperatur temperature C C 35 Belaria SRM (4-8) Belaria compact SRM (4-8) Cooling Belaria SRM (11-16) Belaria compact SRM (11-16) Cooling Flow Vorlauftemperatur temperature C C Flow Vorlauftemperatur temperature C C Outside Aussentemperatur temperature C C Outside Aussentemperatur temperature C 46 10

9 Technical data Hoval Belaria SRM Hoval Belaria compact SRM Sound pressure level - sound power level 3 the outside unit is placed at a building facade. These The sound pressure level is dependent on the place of measurement - the sound power level is a characteristic of the sound source and therefore does not change with distance; it describes the totality of sound power of Structure-borne sound The inside unit must be attached to the wall with a sound insulation dowel with collar. The bases and consoles for the outside unit must against the structural shell. Type SRM (4) SRM (6) SRM (8) SRM (11) SRM (14) SRM (16) Outside unit tion db(a) tion db(a) at 5 m tion at 10 m db(a) Inside unit db(a) whisper mode SRM (4-8) and by 6 db(a) for the Belaria SRM (11-16). 3 Pressure expansion tank Factory setting Pre-pressure 1 bar Capacity l Maximum possible system height Hp 2 m n A x f x X (litres) n A system) System A n 5 kw 120 l 3.6 l expansion quantity 6 kw 140 l 4.2 l expansion quantity 7 kw 160 l 4.8 l expansion quantity 8 kw 180 l 5.4 l expansion quantity 9 kw 200 l 6.0 l expansion quantity If the capacity of the installed expan- tional tank must be installed outside the unit. 11

10 Technical data External static pressure (kpa) Pump characteristic curve Belaria SRM (4-8) External static pressure (kpa) only ausschliesslich Belaria SRM (8) Operating Betriebsbereich range Wassermenge durch das Gerät (Liter/min.) Pump characteristic curve Belaria compact SRM (4) Min. Wassermenge El. Elektr. emergency Notheizung heating Operating Betriebsbereich range Wassermenge durch das Gerät (Liter/min.) External static pressure (kpa) Pump characteristic curve Belaria SRM (11-16) Pump characteristic curve Belaria compact SRM (6,8) External static pressure (kpa) Min. Wassermenge El. Elektr. emergency Notheizung heating Wassermenge durch das Gerät (Liter/min.) Min. Wassermenge El. Elektr. emergency Notheizung heating Operating Betriebsbereich range Wassermenge durch das Gerät (Liter/min.) 34 Pump characteristic curve Belaria compact SRM (11-16) External static pressure (kpa) Min. Wassermenge El. Elektr. emergency Notheizung heating Operating Betriebsbereich range Wassermenge durch das Gerät (Liter/min.) 12

11 Technical data Performance data - heating Hoval Belaria SRM (4-8) Hoval Belaria compact SRM Maximum heat output allowing for defrosting losses Type (4) (6) (8) t VL t F Q HP P COP Q HP P COP Q HP P COP C C kw kw kw kw kw kw t t F outdoor temperature ( C) Q HP P COP Observe daily power interruptions! see Engineering 13

12 Technical data Performance data - heating Hoval Belaria SRM (11-16) Hoval Belaria compact SRM (11-16) Maximum heat output allowing for defrosting losses Type (11) (14) (16) t VL t F Q HP P COP Q HP P COP Q HP P COP C C kw kw kw kw kw kw t t F Q HP outdoor temperature ( C) P COP Observe daily power interruptions! see Engineering 14

13 Technical data Performance data - cooling Hoval Belaria SRM (4-8) Hoval Belaria compact SRM (4-8) Maximum cooling capacity Type (4) (6) (8) t VL t F Q HP P EER Q HP P EER Q HP P EER C C kw kw kw kw kw kw t t F outdoor temperature ( C) Q HP P COP Observe daily power interruptions! see Engineering 15

14 Technical data Performance data - cooling Hoval Belaria SRM (11-16) Maximum cooling capacity Type (11) (14) (16) t VL t F Q HP P EER Q HP P EER Q HP P EER C C kw kw kw kw kw kw t t F Q HP outdoor temperature ( C) P COP Observe daily power interruptions! see Engineering 16

15 Dimensions Hoval Belaria SRM (4-16) Indoor unit (dimensions in mm) Liquid line Belaria Belaria 4 5 Mounting holes R Space requirement for maintenance work and ventilation Inside unit (Dimensions in mm)

16 Dimensions inside unit (Dimensions in mm) R Space requirement for maintenance work and ventilation Inside unit (Dimensions in mm) 1 2 Liquid line Belaria Belaria Condensate drain (cooling) min. 300 min. 100 min. 100 min

Dimensions Hoval Belaria SRM (4-8), Hoval Belaria compact SRM (4-8) outside unit (Dimensions in mm) 2 2 1 1 Connections for refrigerant lines 2 Outdoor temperature sensor 3 Hole for fastening bolts

17 Dimensions Hoval Belaria SRM (4-8), Hoval Belaria compact SRM (4-8) outside unit (Dimensions in mm) Connections for refrigerant lines 2 Outdoor temperature sensor 3 Hole for fastening bolts M8 or M Space requirement for Hoval Belaria SRM, Belaria compact SRM outside unit without roof (Dimensions in mm) min. 100 min min Space requirement for Hoval Belaria SRM, Belaria compact SRM outside unit with roof (Dimensions in mm) There must be adequate space for the outlet (approx. 1 m) to route off the cooled air. The outside unit must be protected against The outside unit must be placed on feet at bed under it to discharge the condensation. (see base plans) Dimensions of protective roof for outside unit min. 200 min min Belaria SRM type (4-8) B T 19

18 Dimensions Space requirement Base plans for Belaria SRM (4-8), Belaria compact SRM (4-8) (Dimensions in mm) Installation in garden, meadow Gravel bed Large Sickerbett stones grosse Steine Ø ca mm mm ca. 500 ca. 0 Depending je nach möglicher on the snow Schneehöhe depth Concrete Beton Beton Dimensions Masse in mm in mm ca.450 Kondensatwasser muss Condensate abfliessen must können be able to run off ca. 0 Depending je nach möglicher on the snow Schneehöhe depth Concrete Beton Dimensions Masse in in mm ca.450 The outside unit must be attached to the base using 4 x M8 screws and concrete dowels! See Accessories 20

Dimensions Space requirement Base plans for Belaria SRM (4-8), Belaria compact SRM (4-8) (Dimensions in mm) 735 Depending je nach möglicher on the snow Schneehöhe depth 4

0 0 Concrete Beton 150 365 Isolation 15 mm insulation 330 580 Dimensions Masse in in mm ca.600 important. Specialists may need to be design.

19 Dimensions Space requirement Base plans for Belaria SRM (4-8), Belaria compact SRM (4-8) (Dimensions in mm) 735 Depending je nach möglicher on the snow Schneehöhe depth 4 Schwingungselemente vibration dampers M8 M8 Kondensatwasser muss Condensate abfliessen must können be able to run off 100 ca. 0 0 Concrete Beton Isolation 15 mm insulation Dimensions Masse in in mm ca.600 important. Specialists may need to be design. The outside unit must not be installed The outside unit must be attached to the concrete dowels! See Accessories. The outside unit must be protected The condensate must be routed away from the base so that no ice can form on the base. base and any snow load) 21

20 Dimensions Space requirement Hoval Belaria SRM (11-16), Hoval Belaria compact SRM (11-16) outside unit (Dimensions in mm) 350 (345 ~ 3) Hot gas connection 2 Liquid connection 3 4 Electrical connection (in the control box) 5 Inlet opening for refrigerant lines 6 Feed-through for power supply 7 8 Condensate outlet Space requirement for Belaria SRM, Belaria compact SRM outside unit without roof (Dimensions in mm) min min min Space requirement for Belaria SRM, Belaria compact SRM outside unit with roof (Dimensions in mm) There must be adequate space for the outlet (approx. 1 m) to route off the cooled air. The outside unit must be protected against The outside unit must be placed on feet at bed under it to discharge the condensation. (see base plans) min. 200 min min Dimensions of protective roof for outside unit Belaria SRM type (11-16) B T 22

Dimensions Space requirement Base plans for Belaria SRM, Belaria compact SRM (11-16) (Dimensions in mm) Installation in garden, meadow 1345 Depending je nach möglicher on the snow

21 Dimensions Space requirement Base plans for Belaria SRM, Belaria compact SRM (11-16) (Dimensions in mm) Installation in garden, meadow 1345 Depending je nach möglicher on the snow Schneehöhe depth Sickerbett Large grosse stones Steine ø Ø approx. ca mm mm approx. ca > 0 Concrete Beton Dimensions Masse in in mm mm Approx. ca Depending je nach möglicher on the snow Schneehöhe depth Condensate Kondenswasser must muss be abfliessen able to run off können > 0 Concrete Beton Dimensions Masse in in mm Approx. ca.500 The outside unit must be attached to the base using 4 x M8 screws and concrete dowels! See Accessories. the bases must be extended to approx. 23

sein, ein kippen der Ausseneinheit zu verhindern, sind Halteseile anzubringen Condensate Kondenswasser must

350 620 Dimensions Masse in in mm mm Approx. ca.700 important. Specialists may need to be design.

The outside unit must be protected The condensate must be routed away from the base so that no ice can form

22 Dimensions Space requirement Base plans for Belaria SRM, Belaria compact SRM (11-16) (Dimensions in mm) 1345 Depending je nach möglicher on the snow Schneehöhe depth 4 Schwingungselemente M8 Sollte es nötig sein, ein kippen der Ausseneinheit zu verhindern, sind Halteseile anzubringen Condensate Kondenswasser must muss be abfliessen able to run off können > 0 Concrete Beton Aeroflex mm insulation Isolation Dimensions Masse in in mm mm Approx. ca.700 important. Specialists may need to be design. The outside unit must not be installed The outside unit must be attached to the concrete dowels! The outside unit must be protected The condensate must be routed away from the base so that no ice can form on the base. base and any snow load) If the outdoor unit is exposed to strong prox. 700 mm and anchoring cables fitted. installed. 24

Engineering Requirements and directives in the Chapter Engineering apply. Set-up General comments The distance between the inside and outside unit must be as short as possible.

23 Engineering Requirements and directives in the Chapter Engineering apply. Set-up General comments The distance between the inside and outside unit must be as short as possible. Only short and simple routing of refrigerant lines guar- The required minimum length for the lines and the lines must not be shorter than this. The maximum permissible length of the lines between the outside and inside unit is 30 m and must not be exceeded. The maximum permissible height difference between outside and inside unit is 20 m. The maximum permissible length of the lines between calorifier and inside unit is 10 m. It is essential to clarify details of the installa- Inside unit SRM air/water heat pump system can be mounted on the wall in the boiler room using a sound insulation dowel with collar. The installation location must be selected in The installation must be free from dust or other foreign matter which could lead to contamination. the building and equipped with a soundabsorbing door. Cross-section of connecting line The heating supply and return should be connected flexibly in structures which are accessories). Access for the purpose of operation and maintenance must be ensured. locations (dewpoint <10 C). The installation of a magnetic sludge separator is mandatory. Outside unit The outside unit is installed outdoors. The installation location must be selected carefully. It is essential that the following ancillary conditions are met: The subsoil in the installation location must be sufficiently stable to bear the weight of the unit (see dimensions Space requirements ). be installed under it. Do not place anything or bedroom windows and be far enough away from neighbouring buildings (perform calculation). The selected location should be such that the air blown out by the unit does not bother occupants of the building or neighbours No parts and plants at risk of frost damage are allowed to be on the blow-out side. Installation on a wall console is not suitable in the case of lightweight walls. Lightweight walls can increase sound emissions and transmit structure-borne sound. The space necessary for intake and outlet quirements). The installation location must be selected so that the air intake and outlet are not blocked Installation in wall niches is not recommend- other. ence with picture and sound. The intake air must be completely free from Install the outside unit so that the intake side faces the wall and is not directly exposed to the wind. where the intake side is directly exposed to the wind. Fit a deflector plate on the air outlet side of wind. stallation location where snow cannot impair 1 Inside unit 2 Outside unit 3 Refrigerant connecting line 4 Hot gas line with thermal insulation 5 Electric connecting cable (on site) Belaria SRM and compact SRM (11-16) 2 cables (power supply and control connection cable) 6 Refrigerant liquid line with thermal insulation 7 Wrapping or duct (on site) 8 PE casing tube at least 100 mm with sealing (on site). All casing tubes for the lines must be routed straight (it must be possible to look down the tube and see the other end!). 9 Condensate (The height is to be determined depend- height >0 mm) 11 Drainage (on site) Line length between outside unit and inside unit SRM type (4-8) (11-16) Minimum line length 3 m 3 m Maximum permissible 30 m 30 m length Maximum permissible height difference 20 m 20 m

24 Engineering Install the unit at sufficient height from the by snow and freezing condensate cannot impair operation (see separate base plans). Condensate (outside unit) Condensate must be able to run off freely. Use a condensate drip tray if the condensate It is essential to insulate the condensate the hose with trace heating. Refrigerant connecting lines The refrigerant connecting lines must be installed by qualified technicians. The line dimensions must be precisely adhered to (see also Section Prices ; refrigerant connecting lines). with thermal insulation. Wall lead-through, protective pipe for routing of the lines (Ø min. 100 mm) for the connecting lines must ed professionally and sealed. brations can generate structure-borne sound. Room cooling Room cooling can be effected with fan con- - must be drained off. - We do not recommend the use of pan- such as temperatures below the dewpoint or the temperature profile must be allowed for and can lead to costly consequential damage in the case of inadequate planning or incorrect use. We recommend that you consult Electric connecting cables The electric connecting cables on the outside unit must be connected flexibly. iffs offered by local energy companies for heat pump systems often means interrupted for 3 periods of 2 hours each. This must be taken into account when dimensioning and planning the heat pump. The trace heating tape must be connected externally in accordance with applicable regulations and protected by a ground fault circuit interrupter. Further guidelines see chapter Engineering 26

25 Examples Hoval Belaria Hydraulic schematic BEQT020 DHW WW T T A F Outdoor unit Dies ist ein unerlaubter Weg! Gehen Sie einen Schritt zurück oder löschen Belaria Sie SRM dieses Shape! Sie haben die Möglichkeit ein neues Shape zu nehmen!!! hovhovalhovalhoval P hovalhovalhovalhov M 2 Y 7 SF Dies ist ein unerlaubter Weg! T Gehen Sie einen Schritt zurück oder löschen Sie dieses Shape! Sie haben die Möglichkeit ein neues Shape zu nehmen!!! hovhovalhoval hovalhovalhova lhovalhovalhov alhovalhovalho valhovalhovalh ovalhovalhoval hovalhovalhova lhovalhovalhov alhovalhovalho valhovalhovalh ovalhovalhoval h CW KW ~20 ltr. Hoval Belaria Hydraulic schematic BEQT060 BR RT Fan coil DHW WW T T T T A F Outdoor unit Dies ist ein unerlaubter Weg! Gehen Sie einen Schritt zurück oder löschen Belaria Sie SRM dieses Shape! Sie haben die Möglichkeit ein neues Shape zu nehmen!!! hovhovalhovalhoval P hovalhovalhovalhov M 2 Y 7 YFc SF Dies ist ein unerlaubter Weg! T Gehen Sie einen Schritt zurück oder löschen Sie dieses Shape! Sie haben die Möglichkeit ein neues Shape zu nehmen!!! hovhovalhoval hovalhovalhova lhovalhovalhov alhovalhovalho valhovalhovalh ovalhovalhoval hovalhovalhova lhovalhovalhov alhovalhovalho valhovalhovalh ovalhovalhoval h CW KW ~20 ltr. 27

26 28

Hoval Belaria SHM (11-16) Air/water heat pump

Hoval Belaria SHM (11-16) Air/water heat pump Description Hoval Belaria SHM Modulating heat pump system operating with 2 compressors in series for heating and providing hot water Indoor unit Outdoor unit