Parts List _2.0. Concertor /180

Transcription

1 Parts List 88624_2.0 Concertor /80

2 Table of Contents Table of Contents Introduction Specially approved products Product Description The data plate Approvals Product denomination Exploded View Drive unit Hydraulic unit Installation components List of Parts /80... Concertor Parts List Tel info@pompdirect.nl

3 Introduction Introduction Purpose of this manual Disclaimer Data for ordering spare parts The purpose of this manual is to provide necessary information on spare parts and accessories order. Always use genuine Flygt parts. The use of other spare parts or accessories can invalidate any claims for warranty or compensation. Xylem does not take any responsibility for damages that are caused by the use of non-original parts. For more information, contact your local sales and service representative. The following information is needed for spare part orders: Serial number of the product Part number Quantity of bulk material, see * in tables. Specially approved products Qualification of personnel Dimensional accuracy inspection Only Xylem or Xylem-authorized service personnel may undertake repair work on specially approved products. Spare parts marked with (Ex) after the part number are subject to dimensional accuracy inspection when used in specially approved products. 2 Concertor Parts List Tel info@pompdirect.nl

4 2 Product Description 2 Product Description 2. The data plate Serial number, see Product denomination on page 5 2. Product number 3. Additional information 4. CE-marking 5. Read installation manual 6. Notified body (only for EN-approved Ex products) 7. Duty class 8. Degree of protection 9. Thermal class 0.Maximum submergence.product weight 2.Direction of rotation: L=left, R=right 3.Nominal motor speed 4.Minimum rated voltage/rated current maximum rated voltage/rated current 5.Maximum ambient temperature (2), rated shaft power (2) 6.Maximum ambient temperature (), rated shaft power () 7.Power factor 8.Phase, type of current, frequency 9.Manufacturer 20.Country of origin 2.Brand WS008366B Concertor Parts List 3 Tel info@pompdirect.nl

5 2 Product Description 2.2 Approvals Product approvals for hazardous locations Pump Approval European Norm (EN) ATEX Directive EN :202/A:203, EN :2007, EN 3463-:2009, EN :20 II 2 G c Ex d IIB T4 Gb IEC IECEx scheme IEC , IEC Ex d IIB T4 Gb FM (FM Approvals) FM 3600:20 FM 365:2005 FM 3650:203 FM 380:2005 ANSI/ISA 600-:202 ANSI/IEC 60529:2004 Explosion proof for use in Class I, Div., Group C and D Dust ignition proof for use in Class II, Div., Group E, F and G Suitable for use in Class III, Div., Hazardous Locations EN approval plate This illustration describes the EN approval plate and the information that is contained in its fields WS003972B. Approval 2. Approval authority and Approval number 3. Approved for drive unit 4. Cable entry temperature 5. Stall time 6. Starting current or Rated current 7. Duty class 8. Duty factor 9. Input power 0.Rated speed.additional information 2.Maximum ambient temperature 3.Serial number 4.ATEX marking IEC approval plate This illustration describes the IEC approval plate and the information that is contained in its fields. International Norm; not for EU member countries. 4 Concertor Parts List Tel info@pompdirect.nl

6 2 Product Description WS00279C. Approval 2. Approval authority and Approval number 3. Approved for drive unit 4. Cable entry temperature 5. Stall time 6. Starting current or Rated current 7. Duty class 8. Duty factor 9. Input power 0.Rated speed.additional information 2.Maximum ambient temperature 3.Serial number 4.ATEX marking FM approval plate This illustration describes the FM approval plate and the information that is contained in its fields.. Temperature class 2. Maximum ambient temperature 2.3 Product denomination Reading instruction 2 WS003973A In this section, code characters are illustrated accordingly: X = letter Y = digit The different types of codes are marked up with a, b and c. Code parameters are marked up with numbers. Codes and parameters XXYYYY. YYY YYY YYYY a b c Type of Callout Number Indication Type of code a Sales denomination b c WS006265B Product code Serial number Concertor Parts List 5 Tel info@pompdirect.nl

7 2 Product Description Type of Callout Number Indication Parameter Hydraulic end 2 Type of installation 3 Sales code 4 Version 5 Production year 6 Production cycle 7 Running number 6 Concertor Parts List Tel info@pompdirect.nl

8 3 Exploded View 3 Exploded View 3. Drive unit C Concertor Parts List 7 Tel info@pompdirect.nl

9 3 Exploded View 3.2 Hydraulic unit LT/50 MT/00 HT/ A 8 Concertor Parts List Tel info@pompdirect.nl

10 3 Exploded View 3.3 Installation components NP WS00382A. Sliding bracket 2. Seal ring, rubber 3. Stud 4. Washer 5. Nut 6. Seal ring, metal 7. O-rings Installation kits for guide system 2 in. Part no Description Pump outlet Discharge connection inlet Metal-to-metal DN DN Rubber seal ring Sliding bracket drilling pattern Metal-to-metal 00 DN 00, DN Rubber seal ring Metal-to-metal DN DN 00, DN Rubber seal ring Metal-to-metal 50 DN 50, DN Rubber seal ring Metal-to-metal DN DN 50, DN Rubber seal ring Power limitations apply. Contact the local sales and service representative. Concertor Parts List 9 Tel info@pompdirect.nl

11 3 Exploded View NS WS0038A. Hexagon head screw 2. Washer 3. Discharge bend 4. Gasket 5. Bolt 6. Stand Part no Description Pump outlet Hose 75 mm DN Thread ISO G NPT Hose 00 mm DN Thread ISO G NPT Hose 50 mm DN Thread ISO G NPT Concertor Parts List Tel info@pompdirect.nl

12 4 List of Parts 4 List of Parts /80 Pos. No Part. No Type Denomination Qty/Version Lifting handle Hex.socket hd screw M8X30-A Data plate Connect. hous.unit Dirigo (TM): Combined motor and housing: FLS Maximum power: 2,20 kw / 3 HP Maximum current: 4,70 A Voltage interval: V For Connect. hous.unit Dirigo (TM): Combined motor and housing: FLS Maximum power: 4 kw / 5 HP Maximum current: 7,50 A Voltage interval: V For Connect. hous.unit Dirigo (TM): Combined motor and housing: FLS Maximum power: 5,50 kw / 7,50 HP Maximum current: 0 A Voltage interval: V For Connect. hous.unit Dirigo (TM): Combined motor and housing: FLS Maximum power: 7,30 kw / 0 HP Maximum current: 3,0 A Voltage interval: V For Tension pin O-ring 29.3X5.7 NBR Caution label Drive screw 4X5-A2/A Insulating hose D=4 MM * * Connect. hous.unit Dirigo (TM): Combined motor and housing: FLS Maximum power: 2,20 kw / 3 HP Maximum current: 4,70 A Voltage interval: V For Concertor Parts List Tel info@pompdirect.nl

13 4 List of Parts Pos. No Part. No Type Denomination Connect. hous.unit Dirigo (TM): Combined motor and housing: FLS Maximum power: 4 kw / 5 HP Maximum current: 7,50 A Voltage interval: V For Connect. hous.unit Dirigo (TM): Combined motor and housing: FLS Maximum power: 5,50 kw / 7,50 HP Maximum current: 0 A Voltage interval: V For Connect. hous.unit Dirigo (TM): Combined motor and housing: FLS Maximum power: 7,30 kw / 0 HP Maximum current: 3,0 A Voltage interval: V For Motor cable subcab S3X2.5+3X2.5/3+S(4X0.5) Motor cable subcab S3X6+3X6/3+S(4X0.5) (Ex) Cable entry unit (8)-20 MM NBR Cable and cable entry SUBCAB S3x2.5+3x2.5/3+S(4x0.5) (Ex) Cable entry unit 20-(22)MM NBR Cable and cable entry SUBCAB S3x6+3x6/3+S(4x0,5) Qty/Version * * * * Single-core cable Single-core cable Hex.socket hd screw M0X45-A Hex.socket hd screw M0X45-A O-ring Sleeve O-ring 7X3 NBR Plug O-ring 29.3X5.7 NBR Clamping sleeve Impeller unit Pressure characteristic: LT Material: CI impeller / CI Insert ring Impeller unit Pressure characteristic: LT Material: HI impeller / HI Insert ring Impeller unit Pressure characteristic: LT Material: SS impeller / CI Insert ring Impeller unit Pressure characteristic: MT Material: CI impeller / CI Insert ring Impeller unit Pressure characteristic: MT Material: HI impeller / HI Insert ring Impeller unit Pressure characteristic: MT Material: SS impeller / CI Insert ring 2 Concertor Parts List Tel info@pompdirect.nl

14 4 List of Parts Pos. No Part. No Type Denomination Impeller unit Pressure characteristic: HT Material: CI impeller / CI Insert ring Impeller unit Pressure characteristic: HT Material: HI impeller / HI Insert ring Impeller unit Pressure characteristic: HT Material: SS impeller / CI Insert ring Pump housing Pressure Characteristic: LT Outlet diameter: 50 mm Pump housing Pressure Characteristic: MT Outlet diameter: 00 mm Pump housing Pressure Characteristic: HT Outlet diameter: 80 mm Qty/Version Plain washer 0.5X23.5X Hex.socket hd screw M0X45-A Hex.socket hd screw M0X45-A Insert ring Pressure characteristic: LT Material: CI impeller / CI Insert ring Pressure characteristic: LT Material: SS impeller / CI Insert ring Insert ring Pressure characteristic: LT Material: HI impeller / HI Insert ring Insert ring Pressure characteristic: MT Material: CI impeller / CI Insert ring Pressure characteristic: MT Material: SS impeller / CI Insert ring Insert ring Pressure characteristic: MT Material: HI impeller / HI Insert ring Insert ring Pressure characteristic: HT Material: CI impeller / CI Insert ring Pressure characteristic: HT Material: SS impeller / CI Insert ring Insert ring Pressure characteristic: HT Material: HI impeller / HI Insert ring Cap 20X36 MM PVC Cable and cable entry SUBCAB S3x2.5+3x2.5/3+S(4x0.5) Cap 22X45 MM PVC Cable and cable entry SUBCAB S3x6+3x6/3+S(4x0,5) (Ex) Seal housing cover Seal housing cover Mechanical seal Material inner seal: Cemented carbide (WCCR) - Cemented carbide (WCCR) Material outer seal: Cemented carbide (WCCR) - Cemented carbide (WCCR) Mechanical seal Material inner seal: Cemented carbide (WCCR) - Cemented carbide (WCCR) Material outer seal: Silicone carbide (RSiC) - Silicone carbide (RSiC) Connection plate Sticker 2 2 Concertor Parts List 3 Tel info@pompdirect.nl

15 4 List of Parts Pos. No Part. No Type Denomination Qty/Version Stud Gland screw Pr Hexagon head screw M6X20-A Cable lug UL/CSA MM2 M Cable lug UL/CSA MM2 M Terminal block 600V/20A UL Hexagon nut M6-A Cable lug UL/CSA MM2 M Hex.socket hd screw M8X6-A Electrical filter Hex.socket hd screw M8X20-A Hex.socket hd screw M8X30-A O-ring 6.9X3.53 NBR O-ring kits Basic repair kit Oil ISO VG 32 * Motor unit 905, Ball bearing 20X52X5 MM 905, Shaft unit 905, Cooling jacket 905, O-ring 200X3- NBR 905, Stator housing unit 905, Insulating hose D=6 MM * * 905, Leakage sensor 905, Ball bearing 35X80X34.9 MM 905, O-ring 74.5X3.0 NBR 905, Bearing cover 905, Retaining ring SGA , Hex.socket hd screw M6X20-A Concertor Parts List Tel info@pompdirect.nl