Revision 1.0 Parts List Maxi Lite

Transcription

1 Revision.0 Parts List Maxi Lite

2

3 Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 Products included... 3 The data plate...3 Exploded View Spare Parts Maxi Lite Parts List

4 Introduction Introduction Purpose of this manual The purpose of this manual is to provide necessary information on spare parts and accessories order. Disclaimer Always use genuine Grindex parts. The use of other spare parts or accessories can invalidate any claims for warranty or compensation. Grindex does not take any responsibility for damages that are caused by the use of non-original parts. For more information, contact your local sales and service representative. Data for ordering spare parts The following information is needed for spare part orders: Serial number of the product Part number Quantity of bulk material, see * in tables Specially approved products Qualification of personnel Only Grindex or Grindex-authorized service personnel may undertake repair work on Ex-approved products. Dimensional accuracy inspection Spare parts marked with (Ex) after the part number are subject to dimensional accuracy inspection when used in specially approved products Maxi Lite Parts List

5 Product Description Product Description Products included The data plate Introduction The data plate Pump model Standard EX MSHA Drainage Sludge Maxi Lite X X The data plate is a metal label located on the main body of the pump. The data plate lists key product specifications WS00008C. Pump type number. Frequency 3. Phases, type of current 4. Rated shaft power 5. Thermal class. Locked rotor code-letter 7. Country of origin 8. Maximum power consumption 9. Product weight 0. Maximum submersion depth. Degree of protection. Maximum capacity 3. Rated current 4. Direction of the start reaction 5. Direction of the impeller rotation. Maximum head 7. Serial number 8. Rated voltage 9. Pump model Product approvals for hazardous locations Maxi Lite Parts List 3

6 Exploded View Exploded View H B_807.0_ _H_expl_view Maxi Lite Parts List

7 Spare Parts Spare Parts Pos. No Part. No Type Denomination 3 38 Mechanical seal Mechanical seal Lock washer Hexagon head screw MX8-A Connection flange Plain washer -A Hexagon head screw MX5-A O-ring 94.3X5.7 NBR Ball bearing 40X90X Bearing guide O-ring 89.X5.7 NBR 3 40 Ball bearing 55X0X Grease * Supporting washer 55X8X Bearing cover 30 4 Hexagon head screw M8X5-A Plain washer 8-A Inspection screw BRASS Plug Seal washer 57.5X45.34X O-ring 9.X3 NBR Oil ISO VG O-ring 99.3X5.7 NBR 3 38 Retaining ring SGA Washer 0. MM Supporting washer 55X8X Stator housing Bearing housing Hexagon head screw MX35-A-70 Qty/Version Maxi Lite Parts List 5

8 Spare Parts Pos. No Part. No Type Denomination Plain washer -A Shaft unit Strainer compl Stud MX30-A Plain washer -A Hexagon nut M-A Diffuser coat. H Diffusor material: NBR Diffuser coat. H Diffusor material: Polyurethane rubber (PU) Suction cover H Diffusor material: NBR 45 34PU Suction cover H Diffusor material: Polyurethane rubber (PU) O-ring 59.3X5.7 NBR O-ring 399.3X5.7 NBR Stud MX80-A Hexagon nut M-A Hexagon nut M-A Plain washer -A Stud MX0-A Plain washer -A- A Hexagon nut M-A Oil housing coated H B DN 00 Diffusor material: NBR Applicable to impeller type: Semiopen PU Oil housing coated H Diffusor material: Polyurethane rubber (PU) Hex.socket hd screw M8X0-A O-ring 89.3X5.7 NBR Stator 5-8-a Stator -leads 3-phase 50 Hz -poles 0V-30V D 380V-400V Y Stator 5-8-a Stator -leads 3-phase 0 Hz -poles 440V-40V DSER 380V-400V Y// Stator -leads 3-phase 0 Hz -poles 0V-30V D// Qty/Version Maxi Lite Parts List

9 Spare Parts Pos. No Part. No Type Denomination Stator 5-8-a Stator -leads 3-phase 50 Hz -poles 380V-400V D 0V-90V Y Stator -leads 3-phase 0 Hz -poles 440V-480V D Stator -leads 3-phase 50 Hz -poles 45V-440V D Stator 5-8-a Stator -leads 3-phase 50 Hz -poles 500V D Stator -leads 3-phase 0 Hz -poles 575V-00V D Stator 5-8-a Stator -leads 3-phase 50 Hz -poles 55V-550V D 000V Y End sleeve 0.75 MM; L= MM End sleeve MM; L=0 MM End sleeve 4 MM; L=0 MM End sleeve.5 MM; L=7 MM Insulating hose D=0 MM Protective disc Impeller B-impeller Semi-open H 50Hz 3-phase Material Hard-Iron TM Curve code: Impeller B-impeller Semi-open H 50Hz 3-phase Material Hard-Iron TM Curve code: B-impeller Semi-open H 0Hz 3-phase Material Hard-Iron TM Curve code: Impeller B-impeller Semi-open H 50Hz 3-phase Material stainless steel (ASTM 3L) Curve code: Impeller B-impeller Semi-open H 0Hz 3-phase Material stainless steel (ASTM 3L) Curve code: Sleeve unit Hexagon head screw MX80-A4-80 Qty/Version 300 * Maxi Lite Parts List 7

10 Spare Parts Pos. No Part. No Type Denomination Plain washer -A Bearing housing Air release valve Stud MX70-A Plain washer -A- A Hexagon nut M-A Con.term.board unit O-ring 39.5X3 NBR Hexagon head screw M8X5-A Plain washer 8-A Plate Cover Auxiliary cable entry: No Auxiliary cable: N/A H Cover Auxiliary cable entry: Yes Auxiliary cable: Plugged H O-ring 84.3X5.7 NBR Hexagon head screw MX35-A Plain washer -A Lifting eye bolt M Plate-blank Drive screw 4X5-A/A Instruction plate Connection plate Gland screw Plain washer.5x0.5x-a Seal sleeve (0)- MM Plate Plug Outer casing O-ring 399.3X5.7 NBR Hexagon head screw MX35-A Plain washer -A Entrance flange Entrance flange Plain washer (3)-34 MM 8 Qty/Version Maxi Lite Parts List

11 Spare Parts Pos. No Part. No Type Denomination Plain washer (3)-34 MM Plain washer (33)-35 MM Plain washer (33)-35 MM Plain washer (37)-39 MM Seal sleeve (3)- MM Seal sleeve (3)- MM Seal sleeve ()-9 MM Seal sleeve ()-9 MM Seal sleeve (3)-35 MM Seal sleeve (3)-35 MM Seal sleeve (3)-38 MM Seal sleeve (9)-3 MM Sleeve Sleeve O-ring 49.5X3 NBR Cover Motor cable subcab 4G+X, Motor cable subcab 7G+S(X0,5) Motor cable subcab 4G0+S(X0,5) Motor cable subcab 4G0+S(X0,5) Motor cable subcab 4G+S(X0.5) Motor cable subcab 4G+S(X0.5) Motor cable subcab 4G5+S(X0,5) Motor cable subcab 4G5+S(X0,5) Motor cable subcab 4G35+S(X0,5) 4 - mm * 4 - mm * 4 - mm * 4 - mm * - 8mm * - 8mm * 3-34mm * 3-34mm * 35-37mm * Motor cable 3,80-34,80mm * Motor cable subcab S3X0+3X0/3+S(4X0,5 ) Motor cable subcab S3X0+3X0/3+S(4X0,5 ) Motor cable subcab S3X5+3X/3+S(4X0,5 ) 4 - mm * 4 - mm * 9-3mm * Qty/Version Maxi Lite Parts List 9

12 Spare Parts Pos. No Part. No Type Denomination Cap 4X45 MM PVC Cap 4X45 MM PVC Cap X45 MM PVC Cap X45 MM PVC Cap 3X45 PVC Cap 3X45 PVC Cap 35X45 PVC Cap 33X45 PVC Cap 30X45 MM Hexagon head screw Hexagon head screw End sleeve MM; L=0 MM End sleeve 0 MM; L= MM End sleeve 0 MM; L= MM End sleeve MM; L= MM End sleeve MM; L= MM End sleeve 5 MM; L=5 MM End sleeve 5 MM; L=5 MM End sleeve 35 MM; L=8 MM End sleeve.5 MM; L=7 MM End sleeve 0.75 MM; L= MM End sleeve MM; L=0 MM Cable lug UL/CSA MM Cable lug INSUL.UL/CSA.-.4MM Cable lug UL/CSA MM Cable lug D8, 4- MM Cable lug D8, 4- MM Cable lug D8, 0 MM Cable lug D8, 0 MM Cable lug D8 MM Qty/Version Maxi Lite Parts List

13 Spare Parts Pos. No Part. No Type Denomination Cable lug D8 MM Cable lug D8 5 MM Cable lug D8 5 MM Cable lug D0, 35 MM Shrink hose ID= MM * Shrink hose ID=3. MM * Shrink hose ID=9.5 MM * Closed-end splice (AWG -8) L= Plate SENSOR CONNECTED T-T Cap X PVC Cap 7X PVC Hexagon head screw MX-A Discharge connection DN 00 Thread: ISO G4A Outer aluminium Applicable to pressure characteristic: H DN 00 Thread: ISO G4A Outer Quick coupling: Storz aluminium Applicable to pressure characteristic: H DN 00 Hose 4'' aluminium Applicable to pressure characteristic: H 0, 4 0 Coupling ISO G4B - 4" HOSE Discharge connection DN 00 Thread: NPT 4-8 Outer aluminium Applicable to pressure characteristic: H Hexagon head screw MX35-A Plain washer -A Gasket Coupling part Stand O-ring kit Zinc anode kit Wear part kit Wear part kit Hydraulic repair kit Qty/Version Maxi Lite Parts List

14 Spare Parts Pos. No Part. No Type Denomination Hydraulic repair kit Qty/Version Maxi Lite Parts List

15

16 Grindex Gesällvägen Sundbyberg Sweden Tel: Fax: Visit our Web site for the latest version of this document and more information The original instruction is in English. All non-english instructions are translations of the original instruction. 04 Grindex 88589_.0_en-US_05-_GPL_