Accessories guide. Low Suction Collars Micro, Macro Minex Minette Minor, Major
|
|
- Eleanore Mosley
- 5 years ago
- Views:
Transcription
1 guide Low Suction Collars Micro, Macro Minex Minette 5400 Minor, Major Zinc Anode Kits Minex, Minette Minor, Major Master Master SH* 895 Matador Maxi 898 Magnum Mega N 5700 Mega H 570 Salvador Senior, Sandy * Must be used in combination with steel base plate 400RF Minette Inox 894 Major Inox 895 Master Inox 895 Salvador Inox 894 Senior Inox 895 Sandy Inox 895 Bravo 00/00 drive unit Bravo 00/00 hydraulic unit 5600 Bravo 400 drive unit Bravo 400 hydraulic unit Bravo 500/600 drive unit 5600 Bravo 500/600 hydraulic unit Bravo 700/800 drive unit 5600 Bravo 700/800 hydraulic unit Bravo 900 drive unit 5600 Bravo 900 hydraulic unit Stand Mega N (H) 500 Page (7) Revision
2 guide Tandem connection kits Minor N*, Major N* 5500 Minor H*, Major H* 550 Master N*/H* 550 Master SH (not according to picture) 5040 Matador N* 550 Matador H* 550 Maxi N 6" 445 Maxi ISO G6 446 Maxi N NPT Maxi N 8" 448 Maxi N ISO G8 449 Maxi N NPT Maxi H ISO G4 440 Magnum H 6" Magnum H NPT * Must be used in combination with discharge connection mounted on the adapter. (discharge not included in kit) Level regulator kits - Micro, Mini (ver. ), Solid (ver. 8) Micro, Mini, Solid - CE Micro, Mini, Solid - CSA Level regulator kits Minex, Minette, Minor, Major, Salvador, Senior, Sandy ** - & -Phase - Max 400V CE approved & -Phase - Max 50V or 4V* control cirquit CE approved & -Phase - Max 50V or 4V* control cirquit CSA approved 5550 * For 4V level regulator control cirquit order transformer and contactor separate - Contactor 4V Transformer V Transformer V For Minor/Major, Senior Sandy, holder For more information see assembly instruction for 55500/-0/-0 ** Main cover for - Minex, Minette, Salvador are prepared for level regulator assembly from serial number old Minex before serial number main cover 550 must be ordered or drill/thread according instru - old Minette, Salvador - before serial number main cover 5670 must be ordered - Minor-Major, Senoir-Sandy - main cover must be ordered separate or drill/thread according instructio Level regulator, -Phase - OLD VERSIONS CE - Micro, Macro (ver. 0), Solid (ver. 80), or Minex, Minette*, Salvador* with lower serial no than CSA - Micro, Macro (ver. 0), Solid (ver. 80), or Minex, Minette*, Salvador* with lower serial no than Contact plug including cables for , * Main cover 5670 required for pumps with serial number lower than Page (7) Revision
3 guide External level control boxes - up to 7 A with one level regulator*, 0m 400V 50 Hz, rated current 6A, with 6A Europlug V 50 Hz, rated current 5A, with A Europlug V 50 Hz, rated current A, with A Europlug V 50 Hz, rated current 7A, with 6A Europlug 560 0,400V Hz, rated current 6A ,400V Hz, rated current 5A ,400V Hz, rated current A ,400V Hz, rated current 7A V Hz, rated current 6A V Hz, rated current 5A V Hz, rated current A V Hz, rated current 7A 570 *Optional, two level regulators (start and stop) External level control boxes - over 7 A excluding level regulators, chose from V, Hz (dual volt. transf.) 077 Level regulators Level regulator 6m cable, only for two regulator system 59 Level regulator m cable, only for two regulator system 540 Level regulator 0m cable, only for two regulator system 54 Level regulator 0m cable 6 Level regulator 0,75m cable Page (7) Revision
4 guide Pump raft Raft for Micro, Macro and Minex (lifting capacity 5 kg) 409 Raft for Minette, Minor and Major (lifting capacity 55 kg) 409 Pump raft system , complete units selected for grindex dewatering pumps Pump raft system 80, lifting capacity 80 kg 407 Pump raft system 80, lifting capacity 80 kg 407 Pump raft system 460, lifting capacity 460 kg 4074 Pump raft system 600, lifting capacity 600 kg 4075 Individual parts to build systems (for bill of materials please check accessory leaflet) Pump Raft M00 (ring) Pump Raft M70 (block) Pump lifting frame Lifting chain Screws for pumplifting frame, kit Lifting eye bolts, kit 4065 Connection part / Connection part /4 with eye bolt 4065 Connection part / Connection part / Connection part 4/ Threaded rods M8 5mm, kit Threaded rods M8 60mm, kit Threaded rods M8 90mm, kit Threaded rods M8 55mm, kit Tool kit for assembly 4066 Page 4 (7) Revision
5 guide Cables (units in meter) Power cables G.5mm² (Ø 0- mm) 4G.5mm² (Ø 0,5-,5 mm) 4G.5mm² (Ø,5-,5 mm) 7G.5mm² (Ø 8-0 mm) 4G4mm² (Ø 6-7 mm) 4G6mm² (Ø 8-9 mm) 4G0mm² (Ø,5-5,5 mm) 4G6mm² (Ø 6-8 mm) 4G5mm² (Ø,5-4,5 mm) 4G5mm² (Ø 6,5-8,5 mm) 4G50mm² (Ø 4-45 mm) 4G70mm² (Ø mm) G X 460. Motor cores. Ground core, green/yellow Power cables with control cores 4G.5mm² + x.5mm² (Ø 5-6 mm) 4G.5mm² + x.5mm² (Ø 7-8 mm) 7G.5mm² + x.5mm² (Ø 0- mm) 4G4mm² + x.5mm² (Ø 0- mm) 7G4mm² + x.5mm² (Ø -6 mm) 4G6mm² + x.5mm² (Ø -5 mm) 7G6mm² + x.5mm² (Ø 4,-8, mm) 4G0mm² + x.5mm² (Ø 6-8 mm) 4G6mm² + x.5mm² (Ø 6-8 mm) 4G5mm² + x.5mm² (Ø,5-4,5 mm) 4G5mm² + x.5mm² (Ø 6,5-8,5 mm) AWG power cables 4 AWG/ (Ø,-4, mm) 4 AWG/4 (Ø 4,-5, mm) 4 AWG/7 (Ø 8-0 mm) AWG/4 (Ø 7-8 mm) AWG/7 (Ø 0- mm) 0 AWG/4 (Ø 8-9,7 mm) 8 AWG/4 (Ø 4-6 mm) AWG power cables with control cores 0 AWG/---GC (Ø 0,-, mm) 8 AWG/---GC (Ø 7,-9, mm) 6 AWG/---GC (Ø 0- mm) 4 AWG/---GC (Ø,8-4,8 mm) AWG/---GC (Ø 40,7-4,7 mm) Screened power cables Sx.5mm² + x.5/ + 4x.5mm² (Ø 8,7-0 mm) Sx6mm² + x6/ + 4x.5mm² (Ø 0- mm) Sx0mm² + x0/ + 4x.5mm² (Ø -6 mm) Sx6mm² + x6/ + 4x.5mm² (Ø 9- mm) Sx5mm² + x6/ + 4x.5mm² (Ø 9- mm) Sx5mm² + x6/ + 4x.5mm² (Ø 9- mm) Sx50mm² + x5/ + 4x.5mm² (Ø 8-4 mm) Sx70mm² + x5/ + 4x.5mm² (Ø 4-46 mm) Control cables x.5mm² (Ø 0- mm) 7x.5mm² (Ø 5-7 mm) Page 5 (7) 4 G X + x,5. Motor cores. Ground core, green/yellow. Control cores, creme white, T, T 4 x AWG/---GC. Motor cores. Ground core. GC: Ground check core 4. Control cores, blue, orange S x50+x5/+4x,5. Motor cores. Control cores (T-T4). Screen Revision
6 guide Plugs - 400V Europlug with phase shifter 6A (P+N+PE) Europlug with phase shifter A (P+N+PE) Europlug with phase shifter 6A (P+N+PE) 95 Europlug with phase shifter 5A (P+N+PE) 09 Europlug with phase shifter 6A (P+PE) Europlug with phase shifter A (P+PE) Plugs - 500V Europlug 6A (P+PE) Europlug A (P+PE) 5000 Phase shifters 6A, 0-575V A, 0-575V A, 0-575V 5000 Starters Tubo 8 400V 50/60Hz 6-0A Tubo 8 460V 60Hz 6-0A Magnum 400V 50Hz DOL Magnum 400V 50Hz Star/Delta Magnum 500V 50Hz DOL Magnum Hz DOL Magnum 460V 60Hz Star/Delta Magnum 575V 60Hz DOL Mega 400V 50Hz DOL Mega 80V 50Hz Star/Delta, Monitoring of bearing temp Mega 460V 60Hz Star/Delta 5080 Starters GSP D-D00 for Bravo & Maxi pumps -00 A, multi voltage 0-500V 50/60Hz for DOL start GSP-D, -A DOL 5600 GSP-D40, 8-40A DOL 560 GSP-D50, 40-50A DOL 560 GSP-D6, 45-6A DOL 560 GSP-D75, 57-75A DOL 5604 GSP-D90, 70-90A DOL 5605 GSP-D00, 80-00A DOL 5606 Starters GSP Y-D00 for Bravo & Maxi pumps -00 A, multi voltage 0-500V 50/60Hz for Star-Delta start GSP-Y, -A Y/D 5600 GSP-Y40, 8-40A Y/D 560 GSP-Y50, 40-50A Y/D 560 GSP-Y6, 45-6A Y/D 560 GSP-Y75, 57-75A Y/D 5604 GSP-Y90, 70-90A Y/D 5605 GSP-Y00, 80-00A Y/D 5606 Option. For level control with GSP add separate start & stop level regulators for two regulator system (see page Other configurations on request. Page 6 (7) Revision
7 guide Quick couplings Storz ISO G", DN5 PN6 Aluminium 4007 Storz ISO G", DN75 PN6 Aluminium 4008 Storz ISO G4", DN00 PN6 Aluminium 4009 Storz ISO G6", DN50 PN6 Aluminium (with catches) Storz for hose ", DN5 PN6 Aluminium 40 Storz for hose ", DN75 PN6 Aluminium 40 Storz for hose 4", DN00 PN6 Aluminium 4078 Storz for hose 6", DN50 PN6 Aluminium (with catches) 4094 Chek valve in aluminium Threaded ISO G", inner to outer thread, PN Threaded ISO G", inner to outer thread, PN Threaded ISO G4", inner to outer thread, PN Flap check valve in epoxy resin coated cast iron Flange DN 00, PN 6, (DIN 50) Flange DN 50, PN 6, (DIN 50) 4047 Flange DN 00, PN 0, (DIN 50) 4047 Flange DN 50, PN 0, (DIN 50) Coupling (to flap check valve and victaulic flanges) Hose to flange, 4" DN00, PN0/6 (DIN EN 09-) Hose to flange, 6" DN50, PN0/6 (DIN EN 09-) Victaulic flanges 4" DN00, PN " DN50, PN Victaulic bends in thermoplastic coated steel 4" " Victaulic couplings 4" " Screw for flanges M6X70-A-70, ISO 407 (4"), 8 Pcs per flange M0X80-A-70, ISO 407 (6"), 8 Pcs per flange Nut for flanges M6-A-70 (4"), 8 Pcs per flange 56 M0-A-70 (6"), 8 Pcs per flange Washer for flanges M6-A-70 (4"), 8 Pcs per flange 58 M0-A-70 (6"), 8 Pcs per flange Hose On request Hose clamps On request Test equipment Gauge unit for testing pump preassure, 44 fits hose ", " and 4". Range 0-6 bar (0-60 mvp) Page 7 (7) Revision
Revision 1.0 Parts List Master
Revision.0 www.grindex.com Parts List 805.8 Master Table of Contents Table of Contents Introduction... Specially products... Product Description...3 The data plate...3 Parts... 4 Exploded view... 4 List
More informationNo: En Revision Parts List. Matador O-RING KIT BASIC REPAIR KIT B_8106_180_expl_view
No: 897386 En Revision 9.0 0 0 Parts List Matador 806.80 www.grindex.com O-RING KIT 80 BASIC REPAIR KIT 90 90 0086B_806_80_expl_view Parts List Matador 806.80 Overview Table of Contents This publication
More informationRevision 2.0 Parts List Master
Revision.0 www.grindex.com Parts List 805.8 Master Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 Products included... 3 The data plate...3
More informationWelcome to Grindex Pump handbook! With this handbook we want to share some of our wide experience in pumping with submersible pumps.
5 Hz PUMP HANDBOOK Welcome to Grindex Pump handbook! With this handbook we want to share some of our wide experience in pumping with submersible pumps. You will find an overview of all Grindex pumps with
More informationWelcome to Grindex Pump handbook! With this handbook we want to share some of our wide experience in pumping with submersible pumps.
6 Hz Pump handbook Welcome to Grindex Pump handbook! With this handbook we want to share some of our wide experience in pumping with submersible pumps. You will find an overview of all Grindex pumps with
More informationWelcome to Grindex Pump handbook! With this handbook we want to share some of our wide experience in pumping with submersible pumps.
5 Hz Pump handbook Welcome to Grindex Pump handbook! With this handbook we want to share some of our wide experience in pumping with submersible pumps. You will find an overview of all Grindex pumps with
More informationPUMP HANDBOOK. 50 Hz GRINDEX YEARS
PUMP HANDBOOK GRINDEX YEARS 9 - Hz Welcome to Grindex Pump handbook! With this handbook we want to share some of our wide experience in pumping with submersible pumps. You will find an overview of all
More informationParts List. MINOR
No: 88600 En Revision 3.0 0 Parts List MINOR 803.80 www.grindex.com 5 8 8 6 7 8 O-RING KIT 80 BASIC REPAIR KIT 90 6-68 5 6 7 9 0 50-5 3 5 6 7 8 9 30 300 39-35 85 303 86 3 33 3 35 36 37 38 83 39 0 8 N 68
More informationSubmersible heavy-duty pumps for construction, tunneling, mining and other industries
Submersible heavy-duty pumps for construction, tunneling, mining and other industries Drainage pumps: Minex Minette Minor Major Master Matador Master SH Maxi Magnum Sludge pumps: Salvador Senior Sandy
More informationPUMP HANDBOOK. 60 Hz GRINDEX YEARS
PUMP HANDBOOK GRINDEX YEARS 9 - Hz Welcome to Grindex Pump handbook! With this handbook we want to share some of our wide experience in pumping with submersible pumps. You will find an overview of all
More informationNo: En Revision Parts List. MINETTE O-RING KIT BASIC REPAIR KIT F_8102_171_expl_view
No: 89837 En Revision 6.0 202 0 Parts List MINETTE 802.7 www.grindex.com O-RING KIT BASIC REPAIR KIT 2002F_802_7_expl_view Parts List MINETTE 802.7 Overview Table of Contents This publication contains
More informationParts List. MAJOR
No: 8860 En Revision.0 0.0 Parts List MAJOR 80.80 www.grindex.com 5 8 8 6 7 8 O-RING KIT 80 BASIC REPAIR KIT 90 6-68 5 6 7 9 0 50-5 3 5 6 7 8 9 30 300 39-35 85 303 86 3 33 3 35 36 37 38 83 39 0 8 N 68
More informationNo: En Revision Parts List. MINEX O-RING KIT BASIC REPAIR KIT E_8101_171_expl_view
No: 89850 En Revision 6.0 0 0 Parts List MINEX 80.7 www.grindex.com O-RING KIT BASIC REPAIR KIT 0008E_80_7_expl_view Parts List MINEX 80.7 Overview Table of Contents This publication contains the following
More informationSubmersible heavy-duty pumps for construction, tunneling, mining, quarries and other demanding industries
Submersible heavyduty pumps for construction, tunneling, mining, quarries and other demanding industries Drainage pumps Mini Minex Minette Minor Major Master Matador Maxi Magnum Mega Sludge pumps Solid
More informationGrindex Proline. Heavy duty drainage pumps for construction, quarries and mines. PUMPS FOR PROFESSIONALS
Grindex Proline Heavy duty drainage pumps for construction, quarries and mines. PUMPS FOR PROFESSIONALS Euroflo are a leading supplier to the Construction and Quarrying industries. We also supply product
More informationSubmersible heavy-duty pumps for construction, tunnelling, mining and other demanding industries
Submersible heavy-duty pumps for construction, tunnelling, mining and other demanding industries Drainage pumps: Minex Minette Minor Major Master Matador Master S Maxi Magnum Sludge pumps: Salvador Senior
More informationSubmersible heavy-duty permissible pumps for use in gassy mines or tunnels. Approved by MSHA.
Submersible heavy-duty permissible pumps for use in gassy mines or tunnels. Approved by MSA. Drainage pumps: Minex MSA Minette MSA Minor MSA Major MSA Master MSA Matador MSA Maxi MSA Sludge pumps: Salvador
More informationGRINDEX S GREAT PUMP GUIDE
GRINDEX S GREAT PUMP GUIDE PUMP FEATURES AND BENEFITS 60 Hz Huge water volumes involve high risk and danger in most industries. Whenever and wherever pumps are needed, Grindex gets the job done. Genuine
More informationSubmersible drainage and sludge pumps made of stainless steel for mines, processing industries and salt-water applications.
Submersible drainage and sludge pumps made of stainless steel for mines, processing industries and salt-water applications. Drainage pumps: Minette Major Master Sludge pumps: Salvador Senior Sandy 5 Hz
More informationFlygt Parts List
Flygt 2870.80 Parts List Table of Contents Table of Contents Introduction... 2. Specially approved products... 2 2 Product Description...3 2. Products included... 3 2.2 The data plate...3 2.3 Product
More informationRevision 1.0 Parts List Maxi Lite
Revision.0 www.grindex.com Parts List 807.300 Maxi Lite Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 Products included... 3 The data plate...3
More informationProduct catalogue. Mechanical accessories for pumps and mixers
Product catalogue Mechanical accessories for pumps and mixers Contents Mixer accessories Single guide bar system...4 Double/tripod guide bar system...9 Cantilever system...14 Bottom fixing plate system...15
More informationFlygt Parts List
Flygt 2670.80 Parts List Table of Contents Table of Contents Introduction...2 Purpose of this manual...2 Disclaimer...2 Data for ordering spare parts...2 Specially approved products...2 Qualification
More informationFlygt Parts List
Flygt 260.7 Parts List Table of Contents Table of Contents Introduction...2 Purpose of this manual...2 Disclaimer...2 Data for ordering spare parts...2 Specially approved products...2 Qualification of
More informationTechnical Data DML. Submersible Sewage Pumps with Single Channel Impeller. DML_Techdata_SS_V11 EBARA PUMPS AUSTRALIA PTY. LTD.
Technical Data DML Submersible Sewage s with Single Channel Impeller AUSTRALIA PTY. LTD. DML_Techdata_SS_V Contents -SPECIFICATIONS FEATURES & APPLICATIONS TYPICAL EXPLODED VIEW SPECIFICATIONS SELECTION
More informationBALL VALVES FILTERS TEST POINTS 8
BALL VALVES FILTERS TEST POINTS 8 8 PRODUCT CATALOGUE 357 HYDROSCAND BALL VALVES, FILTERS TEST POINTS TABLE OF CONTENTS BALL VALVES PAGE BALL VALVES The ball valves are mainly used as shut-down valves
More informationNo: En Revision Parts List. MAJOR MSHA A_8103_8104_081_expl_view
No: 882089 En Revision 2.0 202.0 Parts List MAJOR MSHA 80.08 www.grindex.com 2 3 5 6 7 8 9 0 7 8 9 2 3 5 6 2 3 5 6 7 8 9 50 5 52 53 20 2 22 23 2 25 26 27 28 29 30 5 55 56 57 58 59 60 6 62 63 500 3 32 33
More informationfranklinwater.com 50 Hz VR SERIES Vertical Multi-Stage Pumps
franklinwater.com 5 Hz VR SERIES Vertical Multi-Stage Pumps 5 HZ VR SERIES VERTICAL MULTI-STAGE PUMPS Features 2 Applications 2 Pump Specifications Counter-Flange Kits Motor Specifications 4 Ordering
More informationSewage transport Submersible pumps
Series description Wilo-Rexa FIT Available from January 2012 Construction Submersible sewage pump with cast iron hydraulics and stainless steel motor Type key Example: Wilo Rexa FIT V06DA-110/EAD1-2-T0015-540-A
More informationLiquid level switch Type AKS 38
Data sheet Liquid level switch Type AKS 38 AKS 38 is an electro-mechanical liquid level switch designed to provide a reliable, electromechanical response to liquid level changes. The simple and basic design
More informationRated output 5,6 kw 5,6 kw. Max power consumption 6,7 kw 6,7 kw. Shaft speed 2890 RPM 2890 RPM
Drainage pumps H (m) 50 Major 40 30 H 20 10 N 0 0 5 10 15 20 25 30 35 40 Q (l/s) P (kw) 7 6 5 N 4 3 H 2 1 0 A B C Technical data N H Discharge connection 4 3 Rated output 5,6 kw 5,6 kw Max power consumption
More informationFloat Switch AKS 38. Technical brochure MAKING MODERN LIVING POSSIBLE
MAKING MODERN LIVING POSSIBLE Technical brochure Float Switch AKS 38 AKS 38 is an electro-mechanical float switch designed to provide a reliable, electromechanical response to liquid level changes. The
More informationPARTS LIST. Toll Free Phone, (US & Canada): (800) Toll Free Fax, (US & Canada): (800)
1/2 SIZE CONVECTION TJ CINNAMON MCO-E-5 PARTS LIST Toll Free Phone, (US & Canada): (800) 427-6668 Toll Free Fax, (US & Canada): (800) 361-7745 http://www.garland-group.com TJ Cinnamon Oven (Rev 01) Page
More informationVALVES WITH SA ELECTRIC ACTUATOR
505-507 VALVES WITH SA ELECTRIC ACTUATOR CHARACTERISTICS The 505+SA and 507+SA cast iron ball valves are dedicated to the automatic opening/shut-off of pipes carrying low pressure unloaded common fluids.
More informationSize : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : DN 40 to DN 300 Between ISO PN10/16 flanges -10 C + 110 C ( 130 C temporarily ) 16 Bars Long neck for isolation Cast iron
More informationBALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 516 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AD C D E F Kg AS C D
More informationabc CPD7948/075 Rotors, rotor shafts and rotor casings are coated with an anti-corrosive and anti wear coating to prolong element life and efficiency.
CPD7948/075 Specification Oil-Free, Air Cooled, Rotary Screw Compressors - Dryclon Range Models D75, D90, D110, D132, D150 (50Hz) D55, D75, D90, D110, D150 (60Hz) COMPRESSOR PACKAGE An enclosed two stage
More informationData sheet. KRTF /24XEG-S IE3 Version no.: 3. Operating data. Design. Driver, accessories
Data sheet Item no.: 100 Page: 1 / 5 Operating data Requested flow rate 178.00 US GPM Requested developed head 14.40 ft Pumped medium Water Clean water Not containing chemical and mechanical substances
More informationVALVE FEATURES AVAILABLE MODELS LIMITS OF USE IP 67
VALVE FEATURES The resilient seat gate valve type is dedicated to the shut off of clear water and sewage water pipes. The motorization with the REGADA actuator allows the automation and the remote control
More informationContinuous level measuring system NB 4000 Selection list
Table of contents Page Overview P2 Specification / application P3 P4 Options / Accessories P6 Dimensions / materials P7 Spare parts P9 Electrical installation P11 Subject to change. All dimensions in mm
More informationCompany name: BKB Building Solutions Created by: Michael Chlopek Phone: Date: 14/03/2017
Position Qty. Description 1 CR 32-3-2 A-F-A-E-HQQE Phone: 8 61 Date: 1/3/217 Product No.: 961221 Note! Product picture may differ from actual product Liquid: Pumped liquid: Water Liquid temperature range:
More informationGRINDEX PROLINE GRINDEX. Durable, reliable and simply SMART. Electrical submersible drainage pumps
GRIDEX PROLIE GRIDEX www.grindex.com Electrical submersible drainage pumps MIEX MIETTE MIOR MAJOR MASTER MIDI MATADOR MAXI MAGUM 5 z Durable, reliable and simply SMART Grindex electric submersible pumps
More informationBALL VALVE HIT SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 516 HIT SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B PD PD C D E F Kg
More informationBUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - Actreg
B C D BUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B AD AS AD C D F Kg AS C
More informationBALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 350 SERIES Electric actuator - El-O-matic E D C B DIMENSIONS: (mm) Ø DN B EL C D E Kg 1/4" 8 17,3 EL55 57,3 312,3 95 6,89 3/8" 10 17,3 EL55 57,3 312,3 95 6,87 1/2" 15 17,3 EL55 57,3 312,3
More informationCompany name: GRUNDFOS (Singapore) Pte. Ltd. Created by: Angie Ang Phone: Date: 23/03/2017
Position Qty. Description 1 CR 15-7 A-F-A-E-HQQE Date: 3/3/17 Product No.: On request Note! Product picture may differ from actual product Liquid: Pumped liquid: Water Liquid temperature range: -.. 1 C
More informationVALVES WITH NA ELECTRIC ACTUATOR
505-507 VALVES WITH NA ELECTRIC ACTUATOR CHARACTERISTICS The 505+NA and 507+NA cast iron ball valves are dedicated to the automatic opening/shut-off of pipes carrying low pressure unloaded common fluids.
More informationBALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 350 SERIES Electric actuator - El-O-matic E D C B DIMENSIONS: (mm) Ø DN B EL C D E Kg 1/4" 8 17,3 EL55 57,3 312,3 95 6,89 3/8" 10 17,3 EL55 57,3 312,3 95 6,87 1/2" 15 17,3 EL55 57,3 312,3
More information3/2 Directional Control Valves Direct solenoid operated poppet valves Internal thread G1/4, 1/4-18 NPT or flanged with NAMUR interface
3/ Directional Control Valves Direct solenoid operated poppet valves Internal thread G1/4, 1/4-18 NPT or flanged with NAMUR interface Suitable for instrumental air, neutral gaseous and liquid fluids and
More informationMaterials : Ductile iron body EN GJS
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16, Class 150 and JIS10K* - 10 C + 110 C Max Pressure : 16 Bars up to DN300 (10 bars over) Specifications
More informationAccessory. 314 Threaded flanges, welded socket, mounting accessories. 322 plics housing overview
Accessory 314 Threaded flanges, welded socket, mounting accessories 322 plics housing overview 313 Threaded flanges stainless steel 316L Flange F Dimensions according to Form C, DIN2501... K Dimensions
More informationCR3-2 A-FGJ-A-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CR3-2 A-FGJ-A-E-HQQE 3x23/4 5HZ Grundfos Pump 96516649 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96516649/cr-3-2-a-fgj-a-e-hqqe.html
More informationMWD. Industrial Temperature Assemblies RTD. Meassuring range ºC. Pt100 sensor class A, class B, class 1/3, class 1/10, or Cryogenic.
Industrial Temperature Assemblies measuring monitoring analysing MWD OO Meassuring range -200...+600ºC. OO Pt100 sensor class A, class B, class 1/3, class 1/10, or Cryogenic. OO Output: Resistance or analogue
More informationVERTICAL MULTISTAGE PUMPS SSV-F Hz
VERTICAL MULTISTAGE PUMPS SSV-F 1-3 - 6-1 - 15 5Hz TABLE OF HYDRAULIC PERFORMANCES AT 5Hz PUMP TYPE RATED POWER H1 Q = DELIVERY l/min 8,3 16,7, 33,3 2 5, 58,3 67 75, m³/h,5 1 1,5 2 2,5 3 3,5,5 kw HP Bar
More informationDry Pillar Hydrant Type ADR with pre-set break. Technical Bulletin. code. General description
Dry Pillar Hydrant Type ADR with pre-set break General description Type ADR with pre-set break off point and automatic shut-off in case of breakage to prevent water escape. Above ground section 360 rotational
More informationContinuous level measuring system NB 3000 Selection list
Table of contents Page Overview 2 ------------------------------------------------------------------------------------------------------------------- Specifications 3 -------------------------------------------------------------------------------------------------------------------
More informationEbara Submersible Sewage Pumps (Single Channel Impeller)
Ebara Submersible Sewage Pumps (Single Channel Impeller) Features and Applications Model DML 50Hz + Features! Non-clog single channel impeller Non-clog single channel impeller has 3 spherical passage and
More informationCR1-3 A-FGJ-A-E-HQQE 1x220/240 50HZ
GRUNDFOS DATA BOOKLET CR1-3 A-FGJ-A-E-HQQE 1x22/24 5HZ Grundfos Pump 96537538 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96537538/cr-1-3-a-fgj-a-e-hqqe.html
More informationCR3-6 A-FGJ-A-E-HQQE 1x220/240 50HZ
GRUNDFOS DATA BOOKLET CR3-6 A-FGJ-A-E-HQQE 1x2/240 50HZ Grundfos Pump 96537577 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96537577/cr-3-6-a-fgj-a-e-hqqe.html
More informationMaterials : Ductile iron body EN GJS
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to 600 mm Between flanges PN10/16-10 C + 110 C Max Pressure : 16 Bars up to DN300, 10 bars over Specifications : Long neck for isolation
More informationCR15-02 A-F-A-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CR15-2 A-F-A-E-HQQE 3x4D 5 HZ Grundfos Pump 9651893 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/9651893/cr-15-2-a-f-a-e-hqqe.html
More informationMaterials : Ductile iron body EN GJS
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16, Class 150 and JIS10K* - 10 C + 110 C Max Pressure : 16 Bars up to DN300 (10 bars over) Specifications
More informationFlygt /181. Parts List
Flygt 045.091/181 Parts List Table of Contents Table of Contents Introduction... Purpose of this manual... Disclaimer... Data for ordering spare parts... Specially approved products... Qualification of
More informationLH data sheet parts list exploded view dimensional drawing sectional drawing performance curve. parts list as Excel-spreadsheet
data sheet parts list exploded view dimensional drawing sectional drawing performance curve parts list as Excel-spreadsheet Heltorfer Str.6 40472 Düsseldorf Germany Tel.: +49-2-479373 Fax: +49-2-479429
More informationBALL VALVE - 10 SERIES Electric actuator - El-O-Matic
DN B C D BALL VALVE - 10 SERIES Electric actuator - El-O-Matic E L DIMENSIONS: (mm) DN Ø L B C EL D E Kg 10 3/8" 36 33 73 55 298 95 7,8 15 1/2" 36 33 73 55 298 95 7,8 20 3/4" 39 36 76 55 301 95 8,3 25
More informationContinuous level measuring system NB 3000 Selection list. Overview
Table of contents Page Overview P2 ------------------------------------------------------------------------------------------------------------------- Specifications P3 -------------------------------------------------------------------------------------------------------------------
More informationCR5-6 A-FGJ-A-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CR5-6 A-FGJ-A-E-HQQE 3x23/4 5HZ Grundfos Pump 9651741 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/9651741/cr-5-6-a-fgj-a-e-hqqe.html
More informationCast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
More informationCR3-19 A-FGJ-A-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CR3-19 A-FGJ-A-E-HQQE 3x23/4 5HZ Grundfos Pump 96516663 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96516663/cr-3-19-a-fgj-a-e-hqqe.html
More informationMaterials: Parts of the pump in contact with the liquid are manufactured from the following standard
Plastic Centrifugal Pump For Chemical Process DIN EN 22858 (ISO 2858)Standard DESCRIPTION pumps are manufactured to DIN EN 22858 (ISO 2858) standards in respect of design, performance and dimensions. They
More informationMaterials : Cast iron body EN GJL-250
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to 200 PN16 flanges R.F. - 10 C + 80 C with EPDM seat, 120 C with Metal seat Max Pressure : 16 Bars Specifications : Swing check
More informationA type Ejectors (in line) Dimensions and weights
A type Ejectors (in line) Dimensions and weights Our A type ejectors have the best efficiency and are therefore our most commonly sold type. The motive water is coming from the side and suction is created
More informationCR A-F-A-V-HBQV 3x400/ HZ
GRUNDFOS DATA BOOKLET CR12-6-1 A-F-A-V-HBQV 3x4/69 5 HZ Grundfos Pump 95922172 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/95922172/cr-12-6-1-a-f-a-v-hbqv.html
More informationCR45-10 A-F-A-E-HQQE 3x400/ HZ
GRUNDFOS DATA BOOKLET CR45-1 A-F-A-E-HQQE 3x4/69 5 HZ Grundfos Pump 96122815 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96122815/cr-45-1-a-f-a-e-hqqe.html
More informationCRN45-10 A-F-G-V-HQQV 3x400/ HZ
GRUNDFOS DATA BOOKLET CRN45-1 A-F-G-V-HQQV 3x4/69 5 HZ Grundfos Pump 9612316 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn45/9612316/crn-45-1-a-f-g-v-hqqv.html
More informationMaterials : Ductile iron EN GJS body, PTFE seat
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32/40 to 300 mm Between flanges PN10/16 and Class 150 (PN20) - 25 C + 200 C Max Pressure : 16 Bars up to DN150 Specifications : Long
More informationMaterials : Ductile iron body EN GJS
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to 600 mm Between flanges PN10/16-10 C + 130 C Max Pressure : 16 Bars up to DN300, 10 bars over Specifications : Long neck for isolation
More informationSize : Ends : Min Temperature : Max Temperature : MADE OF STAINLESS... MADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 10 C + 110 C Max Pressure : 16 Bars up to DN300 Specifications : Long
More information*the installation defects and wear defects are not covered by the guarantee
Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 30 C + 150 C Max Pressure : 16 Bars up to DN300 Specifications : Long neck for isolation
More informationS GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
More informationTable of contents. Valves 141. Check valves 142. with threaded connector 142. with ISO-flange connection (SAE) 144
Table of contents Valves 4 Check valves 4 with threaded connector 4 with ISO-flange connection (SAE) 44 for manifold mounting 48 Needle valves 5 with threaded connector 5 for manifold mounting 5 for manifold
More informationCRN120-7 A-F-G-V-HBQV 75kW 3x400D 50Hz
GRUNDFOS DATA BOOKLET CRN12-7 A-F-G-V-HBQV 75kW 3x4D 5Hz Grundfos Pump 9592225 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn12/9592225/crn-12-7-a-f-g-v-hbqv.html
More informationMaterials : Ductile iron body EN GJS 500-7
Size : Ends : Min Temperature : Max Temperature : DN 32 to 1400 mm Between flanges PN10/16 and Class 150 (PN20) - 10 C + 130 C Max Pressure : 16 Bars up to DN300 Specifications : Long neck for isolation
More informationSCC 201 E Valid as of E21SE0404 up to E21SE... SCC 201 E
Electrical unit Voltage 3NAC 400V 50-60Hz 1 1 Control panel 2 2 Electrical installation 3 3 Clima Plus 4 4 Steam generator, Bypass 5 5 Hot air heating 6 6 Motor and fan wheel 7 7 Interior cabinet 8 8 Door
More information2 PIECES BALL VALVE PN63
2 PIECES BALL VALVE PN63 Model/Ref: 220 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 400 Flanges ISO PN10/16-10 C + 120 C Max Pressure : 16 Bars up to DN 200
More informationMaterials : Ductile iron EN GJS 500-7, PTFE seat
Seat Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to 300 mm Between flanges PN10/16-25 C + 200 C Max Pressure : 16 Bars up to DN150 Specifications : Long neck for isolation Lug
More informationATLAS COPCO WEDA RANGE PUMPS. Pumps for professionals 50Hz
ATLAS COPCO WEDA RANGE PUMPS Pumps for professionals Hz Designed for Performance 6 Years of expertise and technology built into our pumps WEDA Pumps originate from the old WEDA foundry in the 19 s and
More informationCR45-5 A-F-A-E-HQQE 3x400/ HZ
GRUNDFOS DATA BOOKLET CR45-5 A-F-A-E-HQQE 3x4/69 5 HZ Grundfos Pump 9612285 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/9612285/cr-45-5-a-f-a-e-hqqe.html
More informationCR A-F-A-E-HQQE 3x400/ HZ
GRUNDFOS DATA BOOKLET CR32-1-2 A-F-A-E-HQQE 3x4/69 5 HZ Grundfos Pump 9612224 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/9612224/cr-32-1-2-a-f-a-e-hqqe.html
More informationCRN1S-9 A-P-G-V-HQQV 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN1S-9 A-P-G-V-HQQV 3x23/4 HZ Grundfos pump 965168 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crn1s/965168/crn-1s-9-a-p-g-v-hqqv.html
More informationMaterials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 200 Flanged GN10/16-10 C + 100 C Max Pressure : 16 Bars Specifications : Full bore Stainless steel ball Iso 5211mounting pad Materials : Cast
More informationCRN45-5 A-F-G-V-HQQV 3x400/ HZ
GRUNDFOS DATA BOOKLET CRN45-5 A-F-G-V-HQQV 3x4/69 5 HZ Grundfos Pump 9612315 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn45/9612315/crn-45-5-a-f-g-v-hqqv.html
More informationData sheet. Etaline GN /1852 G10 Version no.: 1 Inline pump. Operating data. Design. Requested developed head m
Data sheet Item no.: 2600 Page: 1 / 5 Operating data Requested flow rate 40.00 m ³/h Actual flow rate 40.00 m ³/h Requested developed head 68.00 m Actual developed head 68.00 m Pumped medium Water Efficiency
More informationMaterials : Ductile iron body EN GJS
Size : Ends : Min Temperature : Max Temperature : DN 40 to 600 mm Between flanges PN10/16-10 C + 110 C Max Pressure : 16 Bars up to DN300, 10 bars over Specifications : Long neck for isolation Ductile
More informationAtlas Copco WEDA Line Pumps (50 Hz) Pumps for professionals
Atlas Copco WEDA Line Pumps ( Hz) Pumps for professionals Designed for Performance Years of expertise and technology built into our pumps WEDA Pumps originate from the old WEDA foundry in the 1 s and the
More informationCR A-F-A-E-HQQE 3x400/ HZ
GRUNDFOS DATA BOOKLET CR64-3-2 A-F-A-E-HQQE 3x4/69 5 HZ Grundfos Pump 96123531 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96123531/cr-64-3-2-a-f-a-e-hqqe.html
More informationMaterials : Ductile iron body EN GJS, carboxylic NBR seat
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 10 C + 90 C Max Pressure : 16 Bars Specifications : Long neck for isolation
More informationPosition Qty. Description Single Price
Position Qty. Description Single Price 1 SEG.4.26.2.5B On request Product No.: 9675913 Note! Product picture may differ from actual product Grundfos SEG pumps are submersible pumps with horizontal discharge
More informationLH data sheet parts list exploded view dimensional drawing sectional drawing performance curve. parts list as Excel-spreadsheet
data sheet parts list exploded view dimensional drawing sectional drawing performance curve parts list as Excel-spreadsheet Data Sheet o 50 mm JIS0K 448 mm 80 mm 530 mm Total Head m 027 mm Efficiency %
More informationCR15-10 A-F-A-E-HQQE 11kW 3x400D 50Hz
GRUNDFOS DATA BOOKLET CR15-1 A-F-A-E-HQQE 11kW 3x4D 5Hz Grundfos Pump 965191 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/965191/cr-15-1-a-f-a-e-hqqe.html
More information