Hyva Pumps Introduction
|
|
- Jewel Allison
- 5 years ago
- Views:
Transcription
1 Introduction Hydraulic pumps Hyva can offer a complete range of gear and piston pumps with a displacement of 10 until 133 liter and a working pressure up to 350 bar. Gear pumps We are in the middle of changing over to a new series of gear pumps. The current series will be in our programme until the end of In the summer of 2005 we will introduce our new RITE series, a series of seven gear pumps to cover the whole tipper market. The main advantages of the new RITE gear pumps are: Higher quality pump Less types lower stock level less stock costs i-directional Rear and side mounting of the hoses maintenance free no standstill The current pump range consists of 3-hole pumps (will still be in the programma after ecember 31st), 4-hole pumps and heavy-duty 4-hole pumps (both will be replaced by the RITE-series).. We have two 3- hole pumps available in our standard range, the 20L and the 32L. The current 4-hole series varies from 17L to 082L, the heavy-duty range varies from 63L to 133L. As said, the RITE series replaces the current 4-hole gear pumps. The new series only consists of seven types for the whole market. The main reason for that is that all seven gear pumps are bi-directional and that we have combined the volumes in a logic way. The new range varies from 35L to 113L Piston pumps For the real heavy-duty applications we strongly advise to use a Hyva piston pump. The standard range of Hyva piston pumps consists of ten types ranging from 40L to L. ode hydraulic pumps Gear pump - 073L -I -4H - R extra code mounting holes R = RITE series 3H = UNI 3H; 3 holes 4H = ISO 4H; 4 holes rotation L = anti clock wise seen from front side of the pump R = clock wise seen from front side of the pump I = I-rotational displacement in liters/min. always pump pump type Gear pump Piston pump
2 Gear pumps UNI 3H Gear pumps UNI 3H: I-Rotational gear pump 020L-I-3H 20 cm³ 5.3 kg U020 G½ 1¼ G½ ¾ bar gear pump 032L-I-3H 31.5 cm³ 6.0 kg U032 G¾ 1¼ G¾ ¾ 10 1 bar 12 A I-Rotational gear pump Part no. escription A gear pump 020L-I-3H gear pump 032L-I-3H
3 Gear pumps RITE-series Gear pumps ISO 4H R series: I-Rotational gear pump 035L-I-4H-R 35 cm³ 12.6 kg 035 G¾ 1¼ G¾ ¾ bar gear pump 052L-I-4H-R 52 cm³ 13.5 kg 052 G1 1¾ G1 ¾ bar gear pump 061L-I-4H-R 61 cm³ 14.1 kg 061 G1 1¾ G1 ¾ bar gear pump 073L-I-4H-R 73 cm³ 15.1 kg 073 G1 1¾ G bar gear pump 082L-I-4H-R 82 cm³ 16.1 kg 082 G1 1¾ G bar gear pump 092L-I-4H-R 92 cm³ 19.4 kg 092 G1¼ 1¾ G1¼ bar gear pump 113L-I-4H-R 113 cm³ 20.5 kg 113 G1¼ 1¾ G¼ bar A Ø12.5 i-rotational gear pump E Ø Part no. escription A E gear pump 035L-I-4H-R gear pump 052L-I-4H-R gear pump 061L-I-4H-R gear pump 073L-I-4H-R gear pump 082L-I-4H-R gear pump 092L-I-4H-R gear pump 113L-I-4H-R Gear pump parts Part no. escription gasket gear pump ISO 4H
4 Piston pumps UNI 4H Piston pumps UNI 4H: Left or Right Rotational Piston pump 040L-R-4H 40 cm³ PQ440 G1 1¾ G¾ ¾ bar Piston pump 040L-L-4H 40 cm³ PQ441 G1 1¾ G¾ ¾ bar Piston pump 050L-R-4H 50 cm³ PQ450 G1 1¾ G¾ ¾ bar Piston pump 050L-L-4H 50 cm³ PQ451 G1 1¾ G¾ ¾ bar Piston pump 063L-R-4H 63 cm³ PQ463 G1 1¾ G¾ ¾ bar Piston pump 063L-L-4H 63 cm³ PQ464 G1 1¾ G¾ ¾ bar Piston pump 0L-R-4H cm³ PQ4 G1 1¾ G¾ bar Piston pump 0L-L-4H cm³ PQ481 G1 1¾ G¾ bar Piston pump 0L-HP-R-4H cm³ PQ482 G1¼ 1¾ G bar Piston pump 0L-HP-L-4H cm³ PQ483 G1¼ 1¾ G bar A 55 Right-Rotational piston pump E Ø40 Ø F R Part no. escription A E F piston pump 040L-R-4H piston pump 040L-L-4H piston pump 050L-R-4H piston pump 050L-L-4H piston pump 063L-R-4H piston pump 063L-L-4H piston pump 0L-R-4H piston pump 0L-L-4H piston pump 0L-HP-R-4H piston pump 0L-HP-L-4H
5 Gear pumps ISO 4H Gear pumps ISO 4H: Left or Right Rotational gear pump 017L-R-4H 17 cm³ kg Q040 G½ 1¼ G½ ¾ bar gear pump 017L-L-4H 17 cm³ kg Q020 G½ 1¼ G½ ¾ bar gear pump 027L-R-4H 27 cm³ kg Q140 G¾ 1¼ G¾ ¾ bar gear pump 027L-L-4H 27 cm³ kg Q120 G¾ 1¼ G¾ ¾ bar gear pump 034L-R-4H 34 cm³ kg Q1 G¾ 1¼ G¾ ¾ bar gear pump 034L-L-4H 34 cm³ kg Q160 G¾ 1¼ G¾ ¾ bar gear pump 051L-R-4H 51 cm³ kg Q310 G1 1¾ G1 ¾ bar gear pump 051L-L-4H 51 cm³ kg Q305 G1 1¾ G1 ¾ bar gear pump 061L-R-4H 61 cm³ kg Q3 G1 1¾ G1 ¾ bar gear pump 061L-L-4H 61 cm³ kg Q360 G1 1¾ G1 ¾ bar gear pump 082L-R-4H 82 cm³ kg Q500 G1¼ 1¾ G bar gear pump 082L-L-4H 82 cm³ kg Q4 G1¼ 1¾ G bar 55 A Left-Rotational gear pump 34.9 L Part no. escription A gear pump 017L-R-4H gear pump 017L-L-4H gear pump 027L-R-4H gear pump 027L-L-4H gear pump 034L-R-4H gear pump 034L-L-4H gear pump 051L-R-4H gear pump 051L-L-4H gear pump 061L-R-4H gear pump 061L-L-4H gear pump 082L-R-4H gear pump 082L-L-4H eliverable until !
6 Gear pumps heavy duty ISO 4H Gear pumps heavy duty ISO 4H: Left, Right or I-Rotational gear pump 063L-R-4H 63 cm³ kg Q415 G1 1¼ G½ ¾ bar gear pump 063L-L-4H 63 cm³ kg Q405 G1 1¼ G½ ¾ bar gear pump 073L-R-4H 73 cm³ kg Q470 G1 1¼ G¾ ¾ bar gear pump 073L-L-4H 73 cm³ kg Q450 G1 1¼ G¾ ¾ bar gear pump 087L-R-4H 87 cm³ kg Q660 G1¼ 1¾ G bar gear pump 087L-L-4H 87 cm³ kg Q640 G1¼ 1¼ G bar gear pump 087L-I-4H 87 cm³ kg Q670 G1¼ 1¾ G1¼ bar gear pump 109L-R-4H 109 cm³ kg Q740 G1¼ 1¾ G bar gear pump 109L-L-4H 109 cm³ kg Q720 G1¼ 1¾ G bar gear pump 109L-I-4H 109 cm³ kg Q750 G1¼ 1¾ G1¼ bar gear pump 133L-R-4H 133 cm³ kg Q840 G1½ 1¾ G bar gear pump 133L-L-4H 133 cm³ kg Q820 G1½ 1¾ G bar gear pump 133L-I-4H 133 cm³ kg Q860 G1½ 1¾ G1½ bar 55 A I-Rotational gear pump 34.9 Part no. escription A gear pump 063L-R-4H gear pump 063L-L-4H gear pump 073L-R-4H gear pump 073L-L-4H gear pump 087L-R-4H gear pump 087L-L-4H gear pump 087L-I-4H gear pump 109L-R-4H gear pump 109L-L-4H gear pump 109L-I-4H gear pump 133L-R-4H gear pump 133L-L-4H gear pump 133L-I-4H eliverable until !
Update about new Bent-Axis piston pumps
Update about new Bent-Axis piston pumps Dear Customer, referring to our previous communication about the new bent axis piston pumps, with the aim to help you in the switch from the old series to the new
More informationPRECISION MOTION CONTROL
PRECISION MOTION CONTROL P535 - series s The P535 series provides a combination of optimum size and price for use in instrumentation applications that require digital control of position and speed. Features
More informationCPX-561 Pipelayer. Max lift capacity (SAE J743B) 18,200 kg / 40,123 lb Operating weight 14,152 kg / 31,200 lb Net flywheel power 78 kw / 105 HP
CPX-561 Pipelayer Max lift capacity (SAE J743B) 18,200 kg / 40,123 lb Operating weight 14,152 kg / 31,200 lb Net flywheel power 78 kw / 105 HP CPX-561 PIPELAYER ABOUT THE CPX-561 The CPX Series are fully
More informationCPX-561 Pipelayer. Max lift capacity (SAE J743B) 18,200 kg / 40,123 lb. Courtesy of Machine.Market
CPX-561 Pipelayer Max lift capacity (SAE J73B) 1,200 kg / 0,123 lb Operating weight 1,152 kg / 31,200 lb Net flywheel power 7 kw / 105 HP CPX-561 PIPELAYER ABOUT THE CPX-561 The CPX Series are fully hydraulic
More informationCompressed air to
G G A S F J 2 N/ S/F Specifications escriptions Cylinder bore size Working fluid mm Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke length mm Rod
More informationType 11,1 cm 3 Displacement: 11,1 cm 3 Connection: 1/2 NPT Thread: 5/16-18UNC-2B
HYDRAULIC COMPRESSOR Basis: SD7H15 Sanden inkl. Incl. suspension Displacement: 154,9 cm 3 Connection vertical or horizontal (Data required by ordering) O-ring No.8 + No.10 Aluminium Hydraulic motor: Gear
More informationRADIAL PISTON MOTORS TECHNICAL DATA HRS2. Max. cont. speed. Specific torque. Recommended flushing flow. Displacement. Min. speed.
A/200/ MAX. 195 3,1 750 3 250 275 350 36 45 89,5 84,5 8 26 A/200/69 MIN. 69 1,1 850 5 250 275 350 24 30 85,5 78 8 26 A/200/75 MIN. 75 1,2 800 5 250 275 350 26 32,5 87 81 8 26 A/200/95 MIN. 95 1,5 775 4
More informationPump SCP / SCPT 090,130 DIN, SAE
3118 GB Pump SCP 012-108 / SCPT 090,130 DIN, SAE Sunfab SCP and SCPT are range of piston pumps of a bent axis design with fixed displacement for demanding mobile hydraulics. It covers the whole displacement
More informationHIGH PRESSURE - pumps
Gear pumps TRAE Positive displacement, external gear pumps intended for hydraulic systems of machines and devices. Material Housing Aluminium Mounting plate Aluminium (groups 1 and 2), cast iron (group
More informationBrochure Hydraulic Pumps, Hydraulic Parts
www.hidrocel.com.tr 2013 Brochure Hydraulic s, Hydraulic Parts Product Group Bent Axis s Piston s PBA s 2PBA s PBX s Gear s PA s PH s Power Take Off HDP s PTO Adapter, Valve, Cardan Shaft www.hidrocel.com.tr
More informationIntroduction. Hyva Hydraulic Kits
Hyva Hydraulic Kits Introduction Hyva Hydraulic Kits The listed components joined together will form ideal kits to drive hydraulic equipment on your commercial vehicle. The following kits are composed
More informationAxial Piston Variable Pump A2VK
Axial Piston Variable Pump A2VK RE 94001/06.10 1/12 Replaces: 07.04 Data sheet Size 12 to 107 Series 1 and 4 Nominal pressure 250 bar Maximum pressure 315 bar Version for pumping plastic components Contents
More informationDouble-acting, magnetic, guided ø 10x2, 16x2, 20x2, 25x2, 32x2 mm
CATALOGUE > Release 8.8 > Series QX twin rod cylinders Series QX twin cylinders Double-acting, magnetic, guided ø 0x2, 6x2, 20x2, 25x2, 32x2 mm High force Precise movement Integrated guide QXB: linear
More informationShown with optional blade. SP-D6M/N LGP Pipelayer
Shown with optional blade SP-D6M/N LGP Pipelayer Max lift capacity Operating weight Net flywheel power 25,000 kg / 55,115 lb 24,680 kg / 54,409 lb 104 kw / 140 HP SP-D6M/N LGP PIPELAYER ABOUT THE SP-D6M/N
More informationDisplacement. (cc/rev) Tap Water Sea Water MC MV Example.
J anus Motors - Axial Piston Totally oil free, clean and completely safe for people, processes and products. As a result of employing advanced materials, high velocity and loaded sliding surfaces can operate
More informationSPX-660 Pipelayer Max lift capacity 65,300 kg / 143,960 lb Operating weight 45,995 kg / 101,400 lb Net flywheel power 261 kw / 350 HP
SPX-660 Pipelayer Max lift capacity Operating weight Net flywheel power 65,300 kg / 143,960 lb 45,995 kg / 101,400 lb 261 kw / 350 HP SPX-660 PIPELAYER TIER 3 ENGINE All SPX-Series pipelayers are built
More informationType KKP. Combination pumps
Features Compact and light Integrated low-pressure unloading valve and fail safe valve (not suitable for continuons rating) Can be started in maximum pressure mode Self-priming Direct installation of motor
More informationHYVA PTO S PNEUMATICALLY OPERATED POWER TAKE-OFF. Hyva Partno. PTO only: Page 1 / 1. Specifications. Mounting kit
Hyva Partno. PTO only: 021211072 Type Gearbox: SCANIA Type Gearbox GR-GRH 900 PTO ratio@1000 eng. rpm 1182 prm Max torque 480 Nm Mounting side Right Cw Part no. 021461002 228-02417HY DO-E 021211072 / 10
More informationHyva Tip Controls Introduction
Introduction Hyva tip controls Hyva offers a complete range of tip controls to engage the power take-off and valves in your hydraulic system. The standard Hyva controls meet every local legislation with
More informationV Series AXIAL PISTON PUMP ORDER CODE
V Series AXIAL PISTON PUMP ORDER CODE V A 1 R B S - A D X A 1 Customers demand Pump Series V Links Type (only V -18): none - Standard A - SAE A bolts Ma. (cm 3 /n):, 18, 3,, 38, 4,, 7 Pump Control Type
More informationMZ05 - MZE05 HYDRAULIC MOTORS
MZ05 - MZE05 HYDRAULIC MOTORS T E C H N I C A L C A T A L O G Hydraulic motors MZ05 - MZE05 OCLAIN HYDRAULICS OVERVIEW A Motor inertia Noise emissions = 0.01 kg.m² = 60 dba A - A A T B A Check valve L
More informationSLU SLUA BASIC LINE ECONOMIC CLAMPING. from the market leader in Steady Rests. Best Price - Top Quality
BASIC LINE from the market leader in Steady Rests ECONOMIC CLAMPING Best Price - Top Quality Steady Rest Steady Rest Application/customer benefits Series - Economic Clamping Best Price - Top Quality!
More informationMK09 COMPACT MOTORS T E C H N I C A L C A T A L O G
MK09 COMPACT MOTORS T E C H N I C A L C A T A L O G Motor Inertia 0.3 kg.m² Theoretical torque Max.power Max. speed Max. pressure at 100 bar at 1000 PSI cm³/tr [cu.in/rev.] Nm [lb.ft] kw [HP] tr/min[rpm]
More informationC.9.CHRONO INVISI TILT AND TURN
C.9. Contents General characteristics... Base set (standard) n 31117, 31118 and 31119... Selection of rods n 30000-...... Installation instructions... Base set PLUS n 31517, 31518 and 31519 Installation
More informationRB-DV 85 High Vacuum Blower
RBDV 85 High Vacuum Blower Call 17809621827 for technical, application and sales support. RBDV series of rotary three lobe PD blowers can operate at high vacuum levels thanks to a ROBUSCHI patented device
More informationL 16 / 24. Marine Diesel Engine. Main Specification. Engine Type rpm 1,000 1,200
L 16 / 4 L 16 / 4 rpm 1,000 1,00 Bore mm 160 Stroke mm 40 Stroke/Bore ratio 1.5 : 1 cm 01 Swept volume per Cyl. liter 4.8 Compression ratio 15. : 1 Mean effective pressure bar.4 0.7 Max. combustion pressure
More informationSCM DIN. Other advantages:
SCM 012-130 DIN SCM 012-130 DIN is a series of axial piston motors particularly suitable for mobile hydraulics. SCM 012130 DIN is of the bent-axis type with spherical pistons. Other advantages: The design
More informationHFP Series. Specifications. Switch specifications. Wide parallel hand Double acting. Operational stroke length: 20, 30, 40, 60mm.
FH0 G B FH0 G A S F J H2 N/ S/F Specifications Size Cylinder bore size mm Actuation Working fluid Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke
More information2006 MINI Cooper ENGINE Engine - Technical Data - Cooper (W10) & Cooper S (W11) Engine - Technical Data - Cooper (W10) & Cooper S (W11)
ENGINE, GENERAL 11 00 ENGINE IN GENERAL 2002-08 ENGINE Engine - Technical Data - Cooper (W10) & Cooper S (W11) ENGINE IN GENERAL Cylinder 4 Bore mm 77 (3.03) Stroke mm 85.8 (3.377) Effective displacement
More informationSUMMARY KIT PNEUMATIC MOTION
SUMMARY G1 P CONFIGURABLE (KIT PMC) G1.2 P READY (KIT PMR) G1.3 P CUSTOM G1.9 SUMMARY G1.1 CONFIGURABLE (KIT PMC) An on-line configurator is provided for the ease-and-quick selection of the cylinder, the
More informationHytork XL Series Technical data pneumatic Rack and Pinion actuators
Product Data sheets DOC.DSH.XL.UK Rev H January 2017 Series Technical data pneumatic Rack and Pinion actuators or from your nearest Actuation Technologies Center: Sheet No.: D66, Rev. D, Page 1 of 2 Date:
More informationMOTOR SCM M2
MOTOR SCM 025 108 M2 Sunfab SCM M2 is a range of robust axial piston motors especially suitable for winch-, slewing-, wheeland track drives. Sunfab SCM M2 is of the bent-axis type with spherical pistons.
More information1.GENERAL WARNINGS. Safely keep this handbook for any further consultation INSTALLATION WARNINGS
ISO 9001: 2008 EN ISO 14001: 2004 SECURITY SYSTEMS Turnstiles INSTALLATION INSTRUCTIONS E100 / V100 / V200 / V300 / V400 / V500 SERIES TRIPOD TURNSTILES C100 SERIES CORRIDOR TYPE MOTORIZED TURNSTILES M100
More informationHydraulic Pump Series VP1 Variable Displacement
Variable Displacement Catalog 9129 8222-02 February 1999, GB Content Page General information 3 Design 3 Specifications 4 Ordering information 4 VP1 cross section 4 Installation dimensions 5 Line dimensioning
More informationPPM 8069 JK FRONT TRACKBAR BRACE / SECTOR SHAFT BRACE INSTALLATION INSTRUCTIONS
Poly Performance MFG, 870 Industrial Way, San Luis Obispo, CA 93401, (805) 242-0397 PPM 8069 JK FRONT TRACKBAR BRACE / SECTOR SHAFT BRACE INSTALLATION INSTRUCTIONS **DISCLAIMER** The Synergy Suspension
More informationBENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO HPM. pag.3
ENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO 3019-2 HPM pag.3 TECHNICAL FEATURES ENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO 3019-2 TECHNICAL FEATURES Displacement cm 3 /rev 12 17 25 34 40 47 55 64 80
More informationREVERSIBLE HYDRAULIC POWER PACKS. 1 node/142/
REVERSIBLE HYDRAULIC POWER PACKS 1 node/142/ 2 Introduction Oil Sistem is a leader in power packs production and offers a wide range of solutions suitable for every type of application. Oil Sistem developed
More informationHand Operated Hydraulic Pumps PHP121DAH65 PHP121DA95. Engineering & Manufacturing Solutions
Engineering & Manufacturing Solutions HP Specifications: Volume Displacement HP22SA 0.20 in3 (3.3 cm3) (When handle is pulled). HP61DA 0.60 in3 (9.8 cm3) per full cycle. HP121DA 1.20 in3 (19.7 cm3) per
More informationLogic elements. Differential pressure sensing elements for applications up to 350 bar (5000 psi) and 400 L/min (100 USgpm)
Hydraulic Screw-in Cartridge Valves (SiCV) Logic elements Differential pressure sensing elements for applications up to 50 bar (5000 psi) and 400 L/min (00 USgpm) Logic elements LOGC ELEMENTS... -4 APPLCATON
More informationHYDRAULIC OIL PUMPS AND MOTORS PRODUCT CATALOG. Hybel - Hydraulic Oil Pumps and Motors
HYDRAULIC OIL PUMPS AND MOTORS PRODUCT CATALOG Hybel Hydraulic Oil Pumps and Motors HYDRAULIC OIL PUMPS AND MOTORS Contents CONTENTS About us.... 04 Products Line.... 06 Configure your product.... 08 Aluminibeta
More informationModule 9. DC Machines. Version 2 EE IIT, Kharagpur
Module 9 DC Machines Lesson 38 D.C Generators Contents 38 D.C Generators (Lesson-38) 4 38.1 Goals of the lesson.. 4 38.2 Generator types & characteristics.... 4 38.2.1 Characteristics of a separately excited
More informationanus Motors - Axial Piston FM V 02/12
anus Motors - Axial Piston Motors - Axial Piston Our anus Axial Piston Motors are totally oil free, clean and completely safe to use. As a result of employing advanced materials, high velocity and loaded
More informationLateral parallel hand Double acting. Operational stroke length: 20, 30, 40mm. 980m/s2
FH0 G G B H2 LB2 N/ S/F Specifications Size Cylinder bore size mm Actuation Working fluid Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke length mm
More informationMOTOR SCM ISO
MOTOR SCM 012-130 ISO SCM 012-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 012-130 ISO is of the bent-axis type with spherical pistons. The design results
More information2012 BMW 135i. ENGINE N55 - Service Information. N55 - Service Information
ENGINE N55 - Service Information INTRODUCTION The N55 engine is the successor to the N54, Re-engineering and modifications have made it possible to now use only one exhaust turbocharger. Against the backdrop
More informationHydraulic kit and accessories for tractor trucks
Hydraulic kit and accessories for tractor trucks pag.1 EXAMPLE DIAGRAMS Tipping valve fi tted onto tank with or without return fi lter Tipping valve fi tted onto the chassis with or without return fi lter
More informationTECHNICAL DATA HYDRAULIC UNIT
GB INSTRUCTIONS MANUAL RISING BOLLARD OIL-HYDRAULIC AUTOMATION COMPONENTS strabuc 918 RELEASE KEY PLUG FOR RELEASE HOLE BOLLARD COVER 12 V WARNING LIGHTS REFLECTORS COMPLETELY RETRACTABLE POST WITH ELECTROPHORESIS
More informationEKOS & EKOS PLUS. patented
aluminium radiators EKOS & patented i r r e s i s t i b l y r o u n d e d Global has manufactured aluminium radiators since 1971 and has reached an experience in the area of aluminium radiators that always
More informationGENERAL SPECIFICATIONS
AUTOMATIC TRANSMISSION - DESCRIPTION AT-3 GENERAL SPECIFICATIONS AUTOMATIC TRANSMISSION -COMPONENT PARTS REMOVAL COMPONENT PARTS REMOVAL COMPONENTS AT-13 Oil Cooler Union Throttle Cable O-Ring A/T Fluid
More informationPVE /117 ED VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTMENT SERIES 30 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS
14 110/117 ED PVE VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTMENT OPERATING PRINCIPLE The PVE pumps are variable displacement vane pumps with direct pressure regulator. The pump group
More informationFILLING AND CHECK VALVE
Filling valves characteristics Size Max. Flow (l/min.) R-114 DN-32 160 Max. Press. Opening ratio 3.6:1 Decompr. ratio Min pilot pressure Max pilot pressure Min. suction opening pressure Pilot volume (cm
More informationSCM M2. Other advantages:
Sunfab s SCM 025-108 M2 is a range of robust axial piston motors with cartridge flange especially suitable for winch-, slewing-, wheel- and track drives. SCM 025-108 M2 is of the bent-axis type with spherical
More informationRADIO FREQUENCY SYSTEMS
C14520.016-E.MU0 DOC.:10000008168-02 LAB4 DEHYDRATOR USER MANUAL 1 DRYING CHAMBER 2 HEATER 3 PUMP 4 AIR BACKWASHING HOLE 5 HUMIDITY PROBE 6 DIGITAL PRESSURE GAUGE 7 RELIEF VALVE 8 SHUT OFF VALVE 9 DRY
More informationCometNews. Introducing a NEW high pressure plunger pumps. TW 500 bar FW 2. November 2011 Number 0 Year I Comet spa information
November 2011 Number 0 Year I Comet spa information CometNews November 2011 Number 0 Year I Comet Spa CometNews Introducing a NEW high pressure plunger pumps TW 500 bar FW 2 TW-TWS 500 bar 8 Plunger pumps
More informationPUMP SIZE Flow rate at 1500 rpm lt/min Operating pressures bar
/7 ED VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES OPERATING PRINCIPLE The VPPL are variable displacement axial-piston pumps with variable swash plate, suitable for applications
More informationHDP Series. Hydraulic Gear Pumps. high performance, custom design, low noise emission, high efficiency...
HDP Series Hydraulic Gear s high performance, custom design, low noise emission, high efficiency... www.hidrocel.com.tr 1 Contents Design of HDP s Range and characteristics HDP 3/61 ISO HDP 3/61 UNI HDP
More informationMZ02 - MZE02 HYDRAULIC MOTORS T E C H N I C A L C A T A L O G
Z02 - ZE02 HYRAULIC OTORS T E C H N I C A L C A T A L O G Hydraulic motors Z02 - ZE02 OCLAIN HYRAULICS OVERVIEW A otor inertia Noise emissions = 0.01 kg.m² = 60 dba A A - A A T B Check valve L B T A ressure
More informationELECTROPNEUMATIC POSITIONING SYSTEM CONTROL WITH THE LEGENDARY LOGO! PLC
ELECTROPNEUMATIC POSITIONING SYSTEM CONTROL WITH THE LEGENDARY LOGO! PLC G. Kozoris Dept. of Automation Engineering, PUAS, Athens, Greece M. Papoutsidakis Dept. of Automation Engineering, PUAS, Athens,
More informationSCM ISO. SCM ISO is a range of robust axial piston motors especially suitable for mobile hydraulics.
SCM 010-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 ISO is of the bent-axis type with spherical pistons. The design results in a compact motor
More informationModel PM 50/20 Intensifier Press. Operation & Maintenance Instructions
Model PM 50/20 Intensifier Press Operation & Maintenance Instructions Revised 07/09/2007 1 1. CHARACTERISTICS Models PM 50/20 Intensifier Press Operation & Maintenance Instructions Approach - Power with
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM s Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without O.D. clamping I.D. clamping
More informationTENSIONERS SPEED SIMPLE LOAD TO USE ACCURATE TENSIONER OPERATION DAMAGE. torqlite.com HYDRAULIC TENSIONER INTRO
TENSIONERS HYDRAULIC TENSIONER INTRO SPEED SIMPLE TO USE ACCURATE LOAD TENSIONER OPERATION NO DAMAGE Hydraulic bolt tensioning provides a quick and easy method for tightening large diameter bolts to high
More informationSeries SYA3000/5000/7000
Port Air Operated Valve Series SYA000/000/7000 How to Order A, B port size Thread type Thread piping (Inch size) - Rc Symbol Port size Applicable series Symbol Port size Applicable series F G SYA000 N
More informationAuto Air Valve Parts List
Auto Air Valve Parts List 1 Cap 1 2 O Ring 1 3 Cover 1 4 Lock Nut 5/16 UNF 1 5 Flat Washer 8mm 2 6 Flat Washer 2 7 Diaphragm 1 8 Guide bush 1 9 O Ring 1 10 O Ring 1 11 Shaft 1 12 Flat Washer 1 13 Seat
More informationavailable models ContaCt InformatIon SPX-460 (46-Ton) Coming soon Europe SPX-660 (66-Ton) SPX-960 (97-Ton) Russia, China and the Middle East India
SPX-960 Pipelayer Max lift capacity Operating weight Net flywheel power 96,000 kg / 211,200 lb 61,000 kg / 134,500 lb 324 kw / 440 HP SPX-960 PIPELAYER General Specifications TIER 3 ENGINE All SPX-Series
More information411BAM Battery Auctioneering Module
uctioneering Module Introduction The is designed to act as a central component of a small system. It can measure the voltage and current of two separate banks, up to 100. It provides three outputs, auctioneered
More informationalternatives to the NGK BR9HS (the recommended standard spark plug for EOS 150)
Appendix amendments to manual EOS 150 - EOS 150 ICI mod. 2019 status 12.2018 spark plug - gap to spark plug electrode and moment of torque To grant for a only single and exact spark at the right time due
More informationHigh Pressure Gear Pumps & Motors Series PZG Pumps Series MZG Motors
High Pressure Gear Pumps & Motors Series PZG Pumps Series MZG Motors Bulletin 650-Z1 High Pressure Gear Pumps and Gear Motors for today s demanding mobile and industrial applications. The PZG and MZG Series
More informationDisc Valve Hydraulic Motors
Disc Valve Hydraulic Motors State of the art motors benefiting from years of experience and inovating constantly to fit your demands. C-i Disc Valve Hydraulic Motors Highlights Product Description In the
More informationVTZ variable speed Reciprocating compressors
MAKING MODERN LIVING POSSIBLE Application guidelines VTZ variable speed Reciprocating compressors R404A, R507, R407C, R134a www.danfoss.com CONTENT VARIABLE SPEED COMPRESSORS... 4 Speed control...4 Advantages
More informationZBD 1001 Differential Cylinder Data sheet 04.16/DS13210
ZBD 1001 Differential Cylinder Data sheet 04.16/DS13210 Description: This series represents the logical and consistent supplementation of already ISO 6022 (250 bar) and ISO 6020/1 (160 bar) standard series.
More informationCONTENTS 1. SIGN ANALYSIS 2. SECURITY EQUIPMENT SELECTION CRITERIA 3. PRODUCT INTRODUCTION 4. GENERAL RULES 5. CONNECTION OF SECURITY EQUIPMENT
CONTENTS 1. SIGN ANALYSIS 2. SECURITY EQUIPMENT SELECTION CRITERIA 3. PRODUCT INTRODUCTION 4. GENERAL RULES 5. CONNECTION OF SECURITY EQUIPMENT 6. MAINTENANCE DETAILS 7. GENERAL CONDITIONS TO BE PAID ATTENTION
More informationMSE03 HYDRAULIC MOTORS T E C H N I C A L C A T A L O G
MSE03 HYDRAULIC MOTORS T E C H N I C A L C A T A L O G Modular hydraulic motors MSE03 POCLAIN HYDRAULICS CHARACTERISTICS Motor inertia Noise emissions = 0.01 kg.m² = 60 dba Theoretical torque Max.power
More informationTIMING BELT TIMING BELT
TIMING BELT TIMING BELT DISASSEMBLY 1. Lift the vehicle by using of jack. 2. Remove the engine support bracket. (14 mm bolt and 2 nuts, 17 mm bolt) 3. Remove the power steering belt. 4. Remove the air
More informationISO 1500 TORQUE WRENCH LOADER WITH 90 ROTATION
ISO 1500 TORQUE WRENCH LOADER WITH 90 ROTATION OPERATORS HANDBOOK (PART NO. 34126) Original Instructions NORBAR TORQUE TOOLS LTD, Beaumont Road, Banbury, Oxfordshire, OX16 1XJ, UNITED KINGDOM Tel : + 44
More informationModular multiple foot switches PC series
3B Modular multiple foot switches PC series Combination diagrams EMERGENCY PUSH BUTTON COMMERCIAL BOX ALUMINIUM PIPES CARRYING ROD ALUMINIUM PIPES HANDLE KIT STABILIZING PLATE DOUBLE CARRYING ROD COMMERCIAL
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationHydraulic Power Console HE V
content Technical data page 3 Manual page 5 Hydraulic Schematic page 6 Electrical wiring diagram page 7 Parts Plan page 8 Parts List page 9 Technical data Engine construction motor power Three-phase motor
More informationMachine elements. Pneumatic stamping unit. Toggle-lever presses
Machine elements Pneumatic stamping unit Toggle-lever presses Machine elements ST 1292 ST 1092 Page 7.03 ST 9041 Page 7.04 ST 9061/62 Page 7.05 ST 9067 Page 7.05 ST 9070/72 Page 7.06 ST 9075 Page 7.07
More informationSteering unit LAGC. Data sheet
Steering unit LAGC Data sheet Nominal sizes Series Maximum flow HE 14365 / 09.2017 40 1000 1 x and 2 x 80 l / min 2 LAGC HE 14365 / 09.2017 Page Content 4 4 5 6 7 8 9 10 11 12 13 14 Features Ordering details
More informationRadial piston motor for heavy duty wheel drives MCR-W
Radial piston motor for heavy duty wheel drives MCR-W RE 15200 Edition: 09.2015 Frame size MCR3, MCR5, MCR10 Displacement 160 cc to 1340 cc Differential pressure up to 450 bar Torque output up to 8530
More informationThis meant that our lubricants were based on customized formulas with the specific characteristics as recommended by the manufacturers at the time.
Introducing Agip Novecento, a line of Eni lubricants specific for vintage cars. Having in the background the great engine era, these lubricants are based on Italian motoring lifestyle and convey emotion
More informationMZE03 HYDRAULIC MOTORS
MZE03 HYRULIC MOTORS T E C H N I C L C T L O G Hydraulic motors MZE03 OCLIN HYRULICS OVERVIEW Motor inertia Noise emissions = 0.0 kg.m² = 60 db - T B Check valve L B T ressure relief valve with dynamic
More informationContents Page Chapter. - Volvo PTO s Scania PTO s Universal for Scania ED 90 engines for Scania ED 120 engines...
Adapter kits and accessories for F1, F2, T1 and VP1 pumps Contents Page Chapter PTO Air valve kits: - Volvo PTO s...48 - Scania PTO s...48 - Universal... 48 PTO adapter kits: - for Scania ED 90 engines...49
More informationPF6 Stainless Steel Piston Actuated On/ Off Valves
Page of TI-P7- CH Issue Cert. No. LRQ 9 ISO 9 PF Stainless Steel Piston Actuated On/ Off Valves Description A -port pneumatically actuated on / off stainless steel valve for use on steam, water, air, oil
More informationAluminum HONDA Block Technical Notes
Aluminum HONDA Block Technical Notes Deck Height 212mm / 8.346" STD B-16 / B-18 226mm / 8.898" STD B-20 Bores 81.5mm (3.209") = 81.23mm unfinished 84.5mm (3.327") = 83.31mm unfinished Main Bearing Journal
More informationHow to Order 1 T Z A. r Pressure range. 05 Pressure range 0 to 0.5 MPa 10 Pressure range 0 to 1 MPa 16 Pressure range 0 to 1.6 MPa
oolant Valve Series S External pilot solenoid S ir operated S How to Order 0 0 Y 0 0 T Z q w e r t y u i o!0!!!!! q Series S00 S00 S00 w Valve type ormally closed ormally open e Seal material R FKM r Pressure
More informationSpecifications VH600. Ambient temperature and operating fluid temperature Operating angle Lubrication. Semi-standard
Hand Valve Series Specifications 0 0 Fluid Proof pressure Max. operating 00/00/00 pressure 0 mbient temperature and operating fluid temperature Operating angle Lubrication ir.5 MPa.0 MPa MPa 5 to C (o
More informationVariable displacement axial piston pumps,
ariable displacement axial piston pumps, for open circuit DISPLACEMENTS From To 2.75 in 3 /rev (45 cm 3 /rev) 5.12 in 3 /rev (84 cm 3 /rev) MAX SPEED 3000 min -1 PRESSURE Max. continuous Max. intermittent
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM Pneumatic Gripper-Swivel System Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without
More informationCMA-B-C-D. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS
CENTRIFUGAL PUMPS CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART 202 PERFORMANCE CHART CMA 0.50 203 PERFORMANCE CHART CMA 0.75 204 PERFORMANCE CHART CMA 0.80 205 PERFORMANCE CHART
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 1370 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) Ø L C PD PE PD D E F Kg PE D E
More informationUNIJOINT is a company of. UNIJOINT Eurocoup Flange Adaptors & Couplings
UNIJOINT is a company of UNIJOINT Eurocoup Flange Adaptors & Couplings UNIJOINT For Challenging Pipe Connections UNIJOINT, established in 1992 in the Netherlands, is a company with a vast experience in
More informationMG02 - MGE02 STEERABLE WHEEL MOTORS T E C H N I C A L C A T A L O G
MG02 - MGE02 STEERABLE WHEEL MOTORS T E C H N I C A L C A T A L O G Steerable wheel motors MG02 - MGE02 POCLAIN HYDRAULICS Methodology : This document is intended for manufacturers of machines that incorporate
More informationCATALOGUE Edition 6 1
CATALOGUE Edition 6 1 CONTENTS ODF CATALOGUE EDITION 6 PISTON PUMPS 4 AND 3 BOLT BENT AXIS PISTON PUMPS 40/30 SERIES GEAR PUMPS TANDEM GEAR PUMPS VANE PUMPS ADAPTORS, COUPLINGS, FLANGES TIPPING VALVES
More informationGW MK3 DELUGE VALVE HYDRAULIC & PNEUMATIC SPARES 100mm (4 ) 150mm (6 ) 200mm (8 )
25 46 22 29 26 17 27 24 35 23 33 34 2 39 12 13 9 6 36 15 4 37 14 EXTERNAL RESET 32 31 16 8 29 28 30 48 49 22 21 5 18 44 11 10 19 20 47 3 7 38 16 22 7 46 HYDRAULIC VALVE SERVICE PARTS: ITEM DESCRIPTION
More informationPF6 Stainless Steel Piston Actuated On/Off Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationGM Standard - GM 90.25
GM Standard - GM 90.25 utomotive Standards - GM 90.25 GM 90.25.00-XX-XX Page /4 GM 90.25.01-XX Page /5 GM 90.25.02-XX Page /6 GM 90.25.03-XX Page /7 GM 90.25.04-XX Page /8 GM 90.25.05-XX-XX Page /9 GM
More informationHydraulic gear pumps and motors
PL 01 T E DISPLACEMENTS From To Hydraulic gear pumps and motors 0.07 in 3 /rev (1.07 cm 3 /rev) 5.56 in 3 /rev (91.10 cm 3 /rev) through bore aluminum body PRESSURE Max. Continuous Max. Intermittent Max.
More informationSP/CPX Hydraulic Conversions. From mechanical pipelayer to hydraulic pipelayer (CPX) From dozer to hydraulic pipelayer (SP)
SP/CPX Hydraulic Conversions From mechanical pipelayer to hydraulic pipelayer (CPX) From dozer to hydraulic pipelayer (SP) SP/CPX CONVERSIONS Hydraulic Kit (CPX) For the conversion of mechanical pipelayers
More information