E2 micro Selection Table. E2 micro Introduction Advantages. E2 micro - one-piece e-chains One-piece, non snap-open
|
|
- Laurel Palmer
- 5 years ago
- Views:
Transcription
1 E micro Introduction dvantages E micro election Table Universal: Mounting bracket with strain relief option, quickflange optionally table: Large, assembly-friendly pins for long unsupported lengths Cable friendly: Very smooth contours ensure the best possible cable life Variety of options: Non snap-open or snap-open on the inner or outer radius Cost-effective: Very lightweight, low price Robust: quare stop dog system for large fill weights (E micro "next generation") Low noise: Installed "brake" reduces noise (E micro "next generation") mallest inner heights and bending radii - E micro E micro e-chains are very small, one-piece and two-piece e-chains with low weight, making them ideal for highly dynamic applications. E micro e-chains are optimal for smallest installation spaces, and are available in many versions. The "next generation" of E micro e-chains offers a robust square stop dog system and up to % longer unsupported lengths as well as % more fill weight at % lower weight (comparison to similar igus e-chains ). n e-chain -opener is included with every series E.1. Many accessories like interior separation elements and fixation options are available. Typical industries and applications Models (micro e-chains ) utomatic doors Vehicles Measuring machines Electric equipment Pick and place robots General machinery if product design award 1989 igus eries eries Inner height Inner width Outer width Outer height ending radius Unsupported Page hi ha R length [m], - 8,7-1,7 8, - 8, 7, 7-1, -,, 1-8,, 6-6, - 68, 1, 18-8,, 6-6 1, - 7, 1, 18-8, 6 1), 6-6 1, - 71, 1, 18-8,6 EC.,6 6-1, - 7, 1, 18-8,7 EC.1 1,9-17,8-7,8 19, 8-7 1, 8 ) 1, - 18, - 8, 19, - 8 1, Ei.,1 6-1, - 7, 1, 18-8,7 7 **,9 16, 1, 18-8, 9 ** 1, 18, 19, 8-8 1, Ei.1 1, - 17,8-7,8 19, 8-7 1, ** One-piece, snap-open along inner radius with film-hinge E micro - one-piece e-chains One-piece, non snap-open 6 6 E micro - one-piece ** and two-piece e-chains nap-open along inner radius 6 8 Cleanroom test upon request E micro - two-piece e-chains nap-open along outer radi n e-chain opener is included with every eries E. and E.1 that can be opened, which significantly reduces installation time UL9-V classification - for eries, 7, 9 (UL9-V upon request) Electrically conductive ED/TEX versions several eries available from stock E.,1 6-1, - 7, 1, 18-8,7 7 ), 16 -, - 7, 1, 18-8, 9 ) 1, 16 -, - 8, 19, 8-8 1, E.1 1, - 17,8-7,8 19, 8-7 1, 8 For new designs we recommend E micro "next generation" eries: 1) EC., ) EC.1, ) E., ) E.1 16 D-CD files, configurators, PDF 17
2 E micro Technical Data Overview Technical Data E micro Order keys and Options Options with order keys based on eries E. Gliding speed / acceleration (maximum) [m/s] / [m/s ] peed / acceleration [m/s] / [m/s ] tandard NC-Version - (no camber) without pretension Reverse bending radius for circular movements ED / TEX classified e-chains II GD FL peed / acceleration FL [m/s] / 6 [m/s ] Part No. tandard Part No. NC-Version Part No. RR Part No. ED-Material Material - permitted temperature C, igumid G - up to +1 C NC Material - permitted temperature C, igumid N (only eries, 7, 9) - up to +8 C Material lower part - permitted temperature C, igumid G (only eries 7, 9) - up to +1 C E...R. e-chain snap-open along outer radius E...R..NC e-chain snap-open along outer radius E...R1/R. e-chain snap-open along outer radius E...R..ED e-chain snap-open along outer radius Material crossbar- permitted temperature C, igumid N (only eries 7, 9) - up to +8 C Ei...R. Ei...R..NC Ei...R1/R. Ei...R..ED Flammability class: igumid G = VDE IIC UL9- / igumid N = VDE IIC UL9-V e-chain snap-open along inner radius e-chain snap-open along inner radius e-chain snap-open along inner radius e-chain snap-open along inner radius = with straight upper run FL = with permitted sag EC...R. EC...R..NC EC...R1/R. EC...R..ED One-piece, non snap-open One-piece, non snap-open One-piece, non snap-open One-piece, non snap-open Installation methods overview, maximum travels Delivery from stock Delivery time: upon request Delivery time: upon request Delivery time: everal series from stock e-chain eries Unsupported application Vertical hanging Vertical standing ide mounted unsupported Rotary application Zig-zag application, m, m, m, m 7 ), m 6 1),6 m EC./Ei./E.,7 m 7, m 9 1, m 9 ) 1, m EC.1/Ei.1/E.1 1, m 8 ) 1, m upon request upon request upon request with rework upon request upon request upon request upon request with rework upon request upon request upon request upon request with rework upon request upon request upon request upon request with rework upon request upon request upon request upon request with rework upon request upon request upon request upon request with rework upon request upon request upon request upon request with rework upon request upon request upon request upon request with rework upon request upon request upon request upon request with rework upon request upon request upon request upon request with rework upon request upon request upon request upon request with rework upon request upon request upon request upon request with rework upon request Order example Order key and colour options based on eries E. Order example for complete e-chain eries E. (1, m), colour black, with mounting brackets and interior separation: e-chain (1, m) Please indicate e-chain length or number of links: 1, m or links + Mounting brackets 1 set (+ ) + Interior separation with separators assembled every nd link Order text: 1, m E...R. + E...PZ + x E...1 Order key e-chain snap-open along outer radius e-chain snap-open along inner radius One-piece, non snap-open eries / Type index (depends on ) ending radius R Colour index (standard black) E...R. Ei...R. EC...R. lack e-chains available from stock! Delivery time for special colours: upon request E...R. E...PZ E...1 General igus colour options for e-chains and e-tubes Colours Order index Colours Order index lack tandard, from stock!. White for e-chains.1 /e-tubes late grey only ED material.ed Grey white for e-chains.1 /e-tubes Grey brown only T material.t Orange for e-chains. /e-tubes Grey only for e-chains. Yellow. for e-chains /e-tubes Dusty grey only for e-tubes.1 Light grey e-chains.1 /e-tubes For new designs we recommend E micro "next generation" eries: 1) EC., ) EC.1, ) E., ) E.1 18 D-CD files, configurators, PDF 19
3 E micro eries Product range mallest applications E micro eries ccessories Mounting brackets, polymer one-piece pivoting...1z Z 6 eries One-piece, non snap-open e-chain Mounting bracket dapter plate..qf e-chain non snap-open..r.. 7.R...R. 7 8,7,7 1,7 R ending radii Weight,,, Part No. full set.. 1Z.7. 1Z.. 1Z Dim. 8,7,7 1,7 upplement Part No. with required radius (R). Example:..8. Dimensions Fill weight 1..7., 8 Inner height mm Pitch mm/link Links/m ( mm) Chain length / dditional Features Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index or... 1Z must be indicated on preassembled configurations Full set. FL Unsupported length / FL [m] Length of travel [m] R D / R D K The required clearance height: F = + mm (with,1 kg/m fill weight) F = + ø +.1 ø dapter plate for rapid installation: for all sizes of Part No...QF The adapter has broken edges so that it can be adapted to the respective e-chain width. It is not absolutely necessary when attaching the mounting brackets. The mounting brackets can also be screwed on without the adapter plate. D-CD files, configurators, PDF 1
4 E micro eries Product range Low weight 7 E micro eries ccessories Mounting brackets, polymer one-piece pivoting More features (PZ) ø 8 8 C 1, eries One-piece, non snap-open e-chain /.. e-chain non snap-open R ending radii Weight with without Dim. Dim. Dim. C R..R. 16.R..R..R ,7,8,9,, PZ..1PZ.16.1PZ..1PZ..1PZ upplement Part No. with required radius (R). Example:..8. Drilling pattern for Part No.: center bores only /.. outer bores only (see figure above) Dimensions Fill weight 1..7., 7 Inner height 7 mm Pitch 16,7 mm/link Links/m 6 ( mm) Chain length / Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index or PZ must be indicated on preassembled configurations Full set. FL Unsupported length / FL [m] Length of travel [m] D / 19 R 16,7 1 - F = + R D K The required clearance height: F = + mm (with,1 kg/m fill weight) D-CD files, configurators, PDF
5 E micro eries Product range Low weight, high dynamics, cost-effective E micro eries ccessories Mounting brackets, polymer one-piece one side pivoting ) t = 1 t = 1 eries One-piece, non snap-open e-chain / e-chain non snap-open. 6.R...R.. 16.R...R...R.. 6.R R ending radii Weight,6,7,7,8,9, Part No. full set Dim. 6 Dim.,7 1,7,7,7,7 68,7 upplement Part No. with required radius (R). Example:..8. Drilling pattern for Part No.: center bores only / outer bores only (see figure above) Dimensions Fill weight , 1 Inner height mm Pitch mm/link Links/m ( mm) Chain length / 1 Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index must be indicated on preassembled configurations Full set. FL.. Unsupported length / FL [m].7 1. Length of travel [m] D R / 1-1 F = + R D 6 7 K 1 16 The required clearance height: F = + mm (with, kg/m fill weight) D-CD files, configurators, PDF
6 E micro eries Product range Very small pitch, smooth running, E micro eries ccessories Mounting brackets, polymer one-piece one side pivoting...1(pz) 17 18, 18,...(PZ) ø 6/ 8 8 C eries One-piece, non snap-open e-chain.6.. /. -.6 e-chain non snap-open. 6.R...R.. 16.R...R...R.. 6.R R ending radii * * * * * *Radius 8 only for eries. - for other widths available upon request, please consult igus for delivery time upplement Part No. with required radius (R). Example:..8. Weight,9,,11,1,16,19 with without Dim PZ..1PZ.16.1PZ..1PZ..1PZ.6.1PZ Mounting bracket with strain relief tiewrap plate has reductions of ø mm / ø 6 mm,. Mounting bracket without strain relief tiewrap plate only has holes of ø mm. Drilling pattern for Part No.: center bores only / outer bores only (see figure above) Dim. Dim. C Dimensions Fill weight ,, 1, Inner height, mm Pitch 1 mm/link Links/m 77 (1 mm) Chain length / Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index or... 1 PZ must be indicated on preassembled configurations Full set. FL D / Unsupported length / FL [m] Length of travel [m] R + 1, 1, - 1, F = + R * 8, 68, 88, 178, D 6 9 K The required clearance height: F = + mm (with, kg/m fill weight) *Radius 8 only for eries. - for other widths available upon request, please consult igus for delivery time 6 D-CD files, configurators, PDF 7
7 7 E micro eries 7 Product range nap-open along outer radius, cost-effective For new designs we recommend E micro "next generation": eries E., E micro eries 7 ccessories Mounting brackets, polymer one-piece locking More features (PZ) (PZ),8/,8/,, eries 7 Two-piece link design, snap-open along outer radius / nap-open along outer radius R ending radii Weight with without Dim. Dim R. 7..R. 7..R. 7..R. 16, ,16,17,, PZ 6.. 1PZ 6.. 1PZ 6.. 1PZ , 7, 7, 7, upplement Part No. with required radius (R). Example: Drilling pattern for Part No.: center bores only / outer bores only (see figure above) Dimensions Fill weight ,, 1 Inner height, mm Pitch mm/link Links/m ( mm) Chain length / 1 Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index PZ 1 must be indicated on preassembled configurations Full set. FL / D Unsupported length / FL [m] Length of travel [m] R F = + R D K 1 16 The required clearance height: F = + mm (with, kg/m fill weight) 8 D-CD files, configurators, PDF 9
8 6 E micro eries 6 Product range Low weight, high dynamics For new designs we recommend E micro "next generation": eries EC., E micro eries 6 ccessories Mounting brackets, polymer one-piece locking More features (PZ) (PZ),8/,8/,, eries 6 One-piece, non snap-open e-chain / e-chain non snap-open 6. 6.R. 6..R R. 6..R. 6..R. 6..R. 6..R R , 16,, R ending radii upplement Part No. with required radius (R). Example: Weight,1,1,16,17,,,6, with without Dim PZ 6..1PZ PZ 6..1PZ 6..1PZ 6..1PZ 6..1PZ 6.6.1PZ , 16,, 7, 7, 7, 7, 71, Drilling pattern for Part No.: center bores only / outer bores only (see figure above) Dim. Dimensions Fill weight ,, 1 Inner height, mm Pitch mm/link Links/m ( mm) Chain length / 1 Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index PZ 1 must be indicated on preassembled configurations Full set. FL / D Unsupported length / FL [m] Length of travel [m] R F = + R D K 1 16 The required clearance height: F = + mm (with, kg/m fill weight) D-CD files, configurators, PDF 1
9 E. Ei. EC. E micro eries E. Product range Next generation, stable, low noise, fast opening,1,1,6 E. Ei. EC. E micro eries E. ccessories Mounting brackets, polymer one-piece one side* or two side pivoting locking E. Ei. EC....E....Ei....EC. E...PZ two side pivoting E...PZ E...PZ one side* pivoting E...6PZ E...1PZ locking E...PZ 1, 8 8 eries E. nap-open along outer radius from both sides tandard eries Ei. nap-open along inner radius from both sides eries EC. One-piece, non snap-open e-chain nap-open along outer radius E.. 6.R. E...R. E.. 16.R. E...R. E...R. E...R. E...R. Ei.. 6.R. Ei...R. Ei.. 16.R. Ei...R. Ei...R. Ei...R. Ei...R. EC.. 6.R. EC...R. EC.. 16.R. EC...R. EC...R. EC...R. EC...R. 1) ED/TEX version available from stock nap-open along inner radius FL One-piece, non snapopen. 1. Unsupported length / FL [m] 1.. Length of travel [m] , R D K 1 16 The required clearance height: F = + mm (with, kg/m fill weight) R D 1, 17,, 7, 7, 7, 7, upplement Part No. with required radius (R). Example: E...8. Dimensions Fill weight R ending radii ,1/,6 1 / E.,1,1,16,17,19,, Ei.,1,1,16,17,19,, 1, 1-1 EC.,1,1,16,17,,, Inner height E.,1 mm Ei.,1 mm EC.,6 mm Pitch mm/link Links/m ( mm) Chain length / F = , 1,, E..6.PZ E...PZ E..16.PZ E...PZ E...PZ E...PZ E...PZ E E with two side pivoting E... - E... E..6.6PZ E...6PZ E..16.6PZ E...6PZ E...6PZ E...6PZ E...6PZ, with one side* pivoting Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index with locking E..6.1PZ E...1PZ E..16.1PZ E...1PZ E...1PZ E...1PZ E...1PZ dditional Features The quick flange can be clipped-in laterally in all mounting brackets. ousing for hexagonal nut or cylinder head screws M. ingle: Part No. E.1.QF / incl. mounting braket Part No. E...PZQF Dim. E...PZ , 67, Dim. 1, 17,, 7, 7, 7, 7, 67, 67, * One side pivoting: Pivot angle = bending radius. One side pivoting only to the inner radius - whether mounted to 1 to! ø, 7, 1 1 must be indicated on preassembled configurations Full set ED/TEX permanently conductive e-chains - everal widths with delivery from stock: Inner widths 16 -, radii R Full ED product range D-CD files, configurators, PDF
10 E. Ei. EC. E micro eries E. ccessories Interior separation New generation E micro eries E. ccessories ssembly tools ave assembly time E. Ei. EC. E. Ei.,1 EC.,6, ave assembly time - Interior separation assembly tool for the E micro "next generation" Convenient insertion of separators and shelves ignificant assembly time reduction Grip and mount can be ordered separately and are easy to change More information 1, 1, E...1 E...1 unassembled E.. assembled E...1 unassembled E.. assembled E...1 E...1 E...1 Note EC.: For one-piece, non snap-open please assemble the interior separation before fitting the e-chain! s standard separators are assembled every nd e-chain link. tandard separator, for e-chains Notch separator for notch crossbar tandard - for any application For a simple vertical subdivision on e-chains. eparators can be arranged anywhere in the e-chain cross section. No snap-in option, freely movable. Locks safely onto in, mm increments For exact positioning in e-chains. Recommended for sidemounted applications. brasion-optimised, cable-friendly design of the separator. e-chain opener for the E micro "next generation" n e-chain opener is included with every eries E. and E.1 that can be opened. The opening of the e-chain links at high speeds saves significant installation time. Open a long piece of e-chain in one go. It s the ideal tool for your own mounting or assembly lines to minimise processing time significantly. More information Up to 7% less wear - Increase the service life of cables even further igus separators optimally adapted to cable geometry. They increase the service life of the cables up to factor. brasion-optimised, cable-friendly design, long service life Mounting-optimised - a simpler and faster assembly Easy-to-use interior separation range for any application tandard separator - no snap-in option, freely movable Notch separator - locks safely onto in, mm increments Partial horizontal subdivision is possible - eries E.1 D-CD files, configurators, PDF
11 7 E micro eries 7 Product range nap-open along inner radius, cost-effective,9 E micro eries 7 ccessories Mounting brackets, polymer one-piece locking More features (PZ) (PZ),8/,8/,, eries 7 One-piece, snap-open along inner radius with film-hinge / nap-open along inner radius R ending radii Weight with without Dim. Dim. 7..R R. 7..R. 7..R.* 7..R.* 16 16,, 6, 6, 6, ,1,16,17,, PZ PZ 6.. 1PZ 6.. 1PZ* 6.. 1PZ* * 6.. 1* 16,, * available upon request, please consult igus for delivery time upplement Part No. with required radius (R). Example: * available upon request, please consult igus for delivery time Drilling pattern for Part No.: center bores only / outer bores only (see figure above) Dimensions Fill weight ,,9 1 Inner height,9 mm Pitch mm/link Links/m ( mm) Chain length / 1 Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index PZ 1 must be indicated on preassembled configurations Full set. FL / D Unsupported length / FL [m] Length of travel [m] R F = + R D K 1 16 The required clearance height: F = + mm (with, kg/m fill weight) 6 D-CD files, configurators, PDF 7
12 9 E micro eries 9 Product range nap-open along inner radius, cost-effective 1, E micro eries 9 ccessories Mounting brackets, polymer one-piece locking More features (PZ) (PZ),8/,8/,, eries 9 One-piece, snap-open along inner radius with film-hinge nap-open along inner radius R ending radii Weight with without Dim. Dim. 9..R R. 9..R. 9..R. 9..R.** 16 18,, 8, 8, 8, ,,,,8, PZ PZ 8.. 1PZ 8.. 1PZ 8.. 1PZ* * 18,, 8, 8, 8, 1 ** available upon request, please consult igus for delivery time upplement Part No. with required radius (R). Example: * available upon request, please consult igus for delivery time Drilling pattern for Part No.: center bores only / all bores (see figure above) Dimensions Fill weight FL 1 1, 19, Inner height 1, mm Pitch mm/link Links/m ( mm) Chain length / 1 Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index PZ 1 must be indicated on preassembled configurations Full set. D / Unsupported length / FL [m] Length of travel [m] R , - 19, F = + 1 R D K The required clearance height: F = + 1 mm (with, kg/m fill weight) 8 D-CD files, configurators, PDF 9
13 9 E micro eries 9 Product range nap-open along outer radius, cost-effective For new designs we recommend E micro "next generation": eries E.1 1, E micro eries 9 ccessories Mounting brackets, polymer one-piece locking More features (PZ) (PZ),8/,8/,, eries 9 Two-piece link design, snap-open along outer radius nap-open along outer radius R ending radii Weight with without Dim. Dim R..R..R..R. 16, 8, 8, 8, ,,,8, PZ 8.. 1PZ 8.. 1PZ 8.. 1PZ , 8, 8, 8, Drilling pattern for Part No.: center bores only / all bores (see figure above) upplement Part No. with required radius (R). Example: Dimensions Fill weight FL Unsupported length / FL [m] Length of travel [m] ,8 R D K The required clearance height: F = + 1 mm (with, kg/m fill weight) D R + 1, 19, / Inner height 1, mm Pitch mm/link Links/m ( mm) Chain length / 8 19, - 19, F = Interior separation 1, X Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index lotted separator for e-chains unassembled 9. assembled 9..1 Full-width shelf e-chains /e-tubes unassembled 1.X assembled 111.X PZ 1 must be indicated on preassembled configurations Full set lotted separator 9. Is used when vertical separation is required. Due to its slot, it allows basic vertical/horizontal shelving arrangements. Full-width shelf 1.X This option makes sense in applications with many thin cables with similar diameters. For a consequent subdivision. Full-width shelves X unassembled assembled X unassembled assembled X unassembled assembled D-CD files, configurators, PDF 1
14 E.1 Ei.1 EC.1 E micro eries E.1 Product range Next generation, stable, low noise, fast opening 1, 1, 1,9 E.1 Ei.1 EC.1 E micro eries E.1 ccessories Mounting brackets, polymer one-piece one side* or two side pivoting locking E.1 Ei.1 EC.1...E.1..Ei.1..EC.1 E.1..PZ two side pivoting E.1...PZ E.1..PZ one side* pivoting E.1...6PZ E.1..1PZ locking E.1...PZ 1, eries E.1 nap-open along outer radius from both sides tandard eries Ei.1 nap-open along inner radius from both sides eries EC.1 One-piece, non snap-open e-chain nap-open along outer radius E.1..R. Ei.1..R. E.1. 1.R. Ei.1. 1.R. E R. Ei R. E.1..R. Ei.1..R. E.1..R. Ei.1..R. E.1..R. Ei.1..R. E.1..R. Ei.1..R FL EC.1..R. EC.1. 1.R. EC R. ) EC.1..R. ) EC.1..R. ) EC.1..R. EC.1..R.. 1. Unsupported length / FL [m] 1.. Length of travel [m] , R 17,8,8,8 7,8 7,8 7,8 7,8 upplement Part No. with required radius (R). Example: E Dimensions Fill weight nap-open along inner radius One-piece, non snapopen 1) Radius 7 only for eries EC.1. ) ED/TEX version available from stock D R ending radii ) ,/1,9 19, / E.1,18,19,,1,,6,9 1, Ei.1,18,19,,1,,6,9 19, - 19, EC.1,19,,,1,,6,9 Inner height E.1 1, mm Ei.1 1, mm EC.1 1,9 mm Pitch mm/link Links/m ( mm) Chain length / F = ,,,8/ E E.1.. E E.1..,, with two side pivoting E.1..PZ E.1.1.PZ E.1.16.PZ E.1..PZ E.1..PZ E.1..PZ E.1..PZ with one side* pivoting E.1..6PZ E.1.1.6PZ E PZ E.1..6PZ E.1..6PZ E.1..6PZ E.1..6PZ Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index with locking E.1..1PZ E.1.1.1PZ E PZ E.1..1PZ E.1..1PZ E.1..1PZ E.1..1PZ dditional Features The quick flange can be clipped-in laterally in all mounting brackets. ousing for hexagonal nut or cylinder head screws M. ingle: Part No. E.1.QF / incl. mounting braket Part No. E.1..PZQF E.1..PZ ,8,8,8 7,8 7,8 7,8 7,8 * One side pivoting: Pivot angle = bending radius. One side pivoting only to the inner radius - whether mounted to 1 to! Dim. Dim. ø, 9,6 1 1 must be indicated on preassembled configurations Full set R ) D K The required clearance height: F = + 1 mm (with, kg/m fill weight) 1) Radius 7 only for eries EC.1. D-CD files, configurators, PDF ED/TEX permanently conductive e-chains - everal widths with delivery from stock: Inner widths 16 -, radii R 8-8. Full ED product range
15 E.1 Ei.1 EC.1 E micro eries E.1 ccessories Interior separation New generation E micro eries E.1 ccessories ssembly tools ave assembly time E.1 Ei.1 EC.1 E.1 Ei.1 7, 7, 1,, EC.1 7, 7, 1,9, ave assembly time - Interior separation assembly tool for the E micro "next generation" Convenient insertion of separators and shelves ignificant assembly time reduction Grip and mount can be ordered separately and are easy to change More information 1, 1, E.1..1 X E.1..1 unassembled E.1. assembled E.1..1 unassembled E.1. assembled E X E.1..1 E.1..1 Note EC.1: For one-piece, non snap-open please assemble the interior separation before fitting the e-chain! s standard separators are assembled every nd e-chain link. tandard separator, for e-chains Notch separator for notch crossbar Full-width shelf e-chains unassembled 1.X assembled 111.X tandard - for any application Is used when vertical separation is required. Due to its slot, it allows basic vertical/horizontal shelving arrangements. No snap-in option, freely movable. Locks safely onto in, mm increments For exact positioning in e-chains. Recommended for sidemounted applications. brasion-optimised, cable-friendly design of the separator. Full-width shelf 1.X This option makes sense in applications with many thin cables with similar diameters. For a consequent subdivision. e-chain opener for the E micro "next generation" n e-chain opener is included with every eries E. and E.1 that can be opened. The opening of the e-chain links at high speeds saves significant installation time. Open a long piece of e-chain in one go. It s the ideal tool for your own mounting or assembly lines to minimise processing time significantly. More information Up to 7% less wear - Increase the service life of cables even further igus separators optimally adapted to cable geometry. They increase the service life of the cables up to factor. brasion-optimised, cable-friendly design, long service life Mounting-optimised - a simpler and faster assembly Easy-to-use interior separation range for any application tandard separator - no snap-in option, freely movable Notch separator - locks safely onto in, mm increments Partial horizontal subdivision is possible - eries E.1 Full-width shelves X unassembled assembled X unassembled assembled X unassembled assembled D-CD files, configurators, PDF
16 8 E micro eries 8 Product range mall pitch, high stability For new designs we recommend E micro "next generation": eries EC.1 1 E micro eries 8 ccessories Mounting brackets, polymer one-piece locking More features (PZ) (PZ),8/,8/,, eries 8 One-piece, non snap-open e-chain e-chain non snap-open R..R..R..R..R..R..R , 1,, 8, 8, 8, 8, *Radius available upon request, please consult igus for delivery time R ending radii * 8 8 8* * * * * upplement Part No. with required radius (R). Example: Weight,1,,,,8,1, with 8.. 1PZ PZ* PZ 8.. 1PZ 8.. 1PZ 8.. 1PZ 8.. 1PZ *vailable upon request, please consult igus for delivery time Drilling pattern for Part No.: without Dim. Dim. 18, 1,, 8, 8, 8, 8, center bores only / all bores (see figure above) 1 Dimensions Fill weight FL Unsupported length / FL [m] Length of travel [m] R * D K D R , The required clearance height: F = + 1 mm (with, kg/m fill weight) *Radius only for Part.No. 8.. and 8.. D-CD files, configurators, PDF / Inner height 1 mm Pitch mm/link Links/m ( mm) Chain length / 8 19, - 19, F = , 7 X Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index Interior separation lotted separator for e-chains unassembled 9. assembled 9..1 Full-width shelf e-chains /e-tubes unassembled 1.X assembled 111.X PZ 1 must be indicated on preassembled configurations Full set lotted separator 9. Is used when vertical separation is required. Due to its slot, it allows basic vertical/horizontal shelving arrangements. Full-width shelf 1.X This option makes sense in applications with many thin cables with similar diameters. For a consequent subdivision. Full-width shelves X unassembled assembled X unassembled assembled X unassembled assembled
17 E mini Introduction dvantages E mini election Table Universal: Mounting bracket with strain relief option pace-efficient: mallest inner heights and bending radii mooth: Dirt-repellent exterior Quiet: mall pitch for smooth running Variations: vailable as two-piece design, snap-open along inner radius (eries 1/F17) Variations: vailable as two-piece design, snap-open along outer radius (eries 1/17) mall and medium sizes - E mini E mini are small one-piece or two-piece e-chains, recommended for high dynamic applications. igus also offers a host of accessories and fixation options. "Upgrades" to openable versions are available for many types; they are interchangeable and can also serve as replacements. mall pitch for smooth running One- and two-piece e-chains available mallest inner heights and bending radii Very lightweight, easy to assemble and cost-effective Typical industries and applications Construction machinery andlings Furniture Packaging machines Textile machines Vehicle construction Woodworking machines Glass machines utomation General machinery eries Inner height Inner width Outer width Outer height ending radius Unsupported Page hi ha R length [m] E mini - One-piece e-chains One-piece, non snap-open , , 8-7 1, , 8 1, 11.1/ , -, 6-1, E mini - One-piece e-chains nap-open along inner radius with film-hinge ,6 F , E mini - Two-piece e-chains nap-open along outer radius Variations: vailable as two-piece design, snap-open along inner radius (eries 1i/17i) pecial version: vailable as one-piece design, non snap-open (eries /11.1/ 11.8/11.1/11.) Cleanroom Class 1 (IO class ) for eries, tested by the Dryden Engineering Company, California UL9-V classification - for eries 1 and F17 (UL9-V upon request) Electrically conductive ED/TEX versions upon request , , , * 1, E mini - Two-piece e-chains nap-open along inner radius 1i , , 17i - 8, - 8, 9 8-1* 1, *Radii for several widths available upon request (please see product range table) D-CD files, configurators, PDF 9
18 E mini Technical Data Overview E mini Order keys and Options Technical Data Options with order keys based on eries 1 Gliding speed / acceleration (maximum) [m/s] / [m/s ] peed / acceleration [m/s] / [m/s ] tandard NC-Version - (no camber) without pretension Reverse bending radius for circular movements Unsupported lengths +% possible ED / TEX classified e-chains II GD FL peed / acceleration FL [m/s] / 6 [m/s ] Part No. tandard Part No. NC-Version Part No. RR Part No. XXL-Material Part No. ED-Material Material - permitted temperature C, igumid G - up to +1 C NC +% Material - permitted temperature C, igumid N (only eries 1) - up to +8 C Material lower part - permitted temperature C, igumid G (only eries 1/1i, 17/17i, F17) - up to +1 C 1..R. 1..R..NC 1..R1/R. 1..R..XXL 1..R..ED Material crossbar- permitted temperature C, igumid N (only eries 1/1i, 17/17i, F17) - up to +8 C Flammability class: = with straight upper run igumid G = VDE IIC UL9- / igumid N = VDE IIC UL9-V FL = with permitted sag Delivery from stock Delivery time: upon request Delivery time: upon request Delivery time: upon request Delivery time: upon request Installation methods overview, maximum travels e-chain eries 1, m , m upon request upon request upon request upon request , m upon request upon request upon request upon request 11.1/11. 1, m upon request upon request upon request upon request 1,6 m 1i / 1 17i / 17 F17 Unsupported application 1, m 1, m 1, m Vertical hanging Vertical standing ide mounted unsupported Rotary application Zig-zag application upon request upon request upon request with rework upon request upon request upon request upon request with rework upon request upon request upon request upon request with rework upon request upon request upon request upon request with rework upon request upon request upon request upon request with rework upon request Order example Order key and colour options based on eries 1 Order example for complete e-chain (1, m), colour black, with mounting brackets and interior separation: e-chain (1, m) Please indicate e-chain length or number of links: 1, m or links + Mounting brackets 1 set (+ ) + Interior separation with separators assembled every nd link Order text: 1, m PZ + x 1 Order key nap-open along outer radius nap-open along inner radius eries / Type index (depends on ) ending radius R Colour index (standard black) Colours Order index 1i..8. lack tandard, from stock!..ed.t PZ x 1 General igus colour options for e-chains and e-tubes late grey only ED material Grey brown only T material Grey only for e-chains Dusty grey only for e-tubes Colours White lack e-chains available from stock! Delivery time for special colours: upon request Order index for e-chains.1 /e-tubes Grey white for e-chains.1 /e-tubes Orange Yellow Light grey for e-chains /e-tubes for e-chains /e-tubes e-chains /e-tubes...1 D-CD files, configurators, PDF 1
19 E mini eries Product range table and cost-effective 18 E mini eries ccessories Mounting brackets, polymer one-piece pivoting locking P(Z) /...1P(Z) 17 7, 1 16, P(Z) /...P(Z 6, 6, eries One-piece, non snap-open e-chain 1././8./.**./6./7.* 7 e-chain non snap-open R ending radii Weight pivoting: with without locking: Dim. with without Dim.. 1.R...R.. 8.R...R R..R..R efore using this eries on long travels please consult igus. upplement Part No. with required radius (R). Example:..8.,,,6,,6,7, PZ.PZ 8.PZ.PZ. PZ 6. PZ 7. PZ 1.P.P 8.P.P. P 6. P 7. P 1.1PZ.1PZ 8.1PZ.1PZ. 1PZ 6. 1PZ 7. 1PZ 1.1P.1P 8.1P.1P. 1P 6. 1P 7. 1P 8 6 8,, 8, 6, ** Drilling pattern for Part No. 1././8./. see drawing left. Each valid for moving end and fixed end * Drilling pattern for Part No../6./7. see drawing right. Each valid for moving end and fixed end 6 8 Dimensions Fill weight FL Unsupported length / FL [m] Length of travel [m] R D / 18 Inner height 18 mm Pitch, mm/link Links/m (6, mm) Chain length /, 8 - F = + 1 Interior separation 1, 8 Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index eparator, for e-chains unassembled assembled PZ 1 must be indicated on preassembled configurations Full set pivoting eparator 1 For a simple vertical subdivision on e-chains. eparators can be arranged anywhere in the e-chain cross section. Interior separation for eries.1.r. not possible! R D K The required clearance height: F = + mm (with, kg/m fill weight) D-CD files, configurators, PDF
20 11.1 E mini eries 11.1 Product range Large inner height, asymmetric design E mini eries 11.1 ccessories Mounting brackets, polymer one-piece pivoting P(Z) 11...P(Z) ø,1 eries 11.1 One-piece, non snap-open e-chain e-chain non snap-open R ending radii Weight R. 1 1, 7, with without Dim PZ P 16 Dim. upplement Part No. with required radius (R). Example: Dimensions Fill weight FL 1 8 Inner height mm Pitch, mm/link Links/m (6, mm) Chain length / Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index or PZ must be indicated on preassembled configurations Full set pivoting Unsupported length / FL [m] Length of travel [m] D / R, 8 16, 8-8 F = + R D 7 1 K 8 The required clearance height: F = + mm (with, kg/m fill weight) D-CD files, configurators, PDF
21 11.8 E mini eries 11.8 Product range Large inner height, asymmetric design 8 E mini eries 11.8 ccessories Mounting brackets, polymer one-piece pivoting P(Z) P(Z) ø,1 eries 11.8 Non snap-open e-chain with moulded-in vertical separation e-chain non snap-open R ending radii R ,7 Dim. Dim. Weight with without Dim PZ P Dim. 1 upplement Part No. with required radius (R). Example: Dimensions Fill weight FL 8, Inner height 8 mm Pitch, mm/link Links/m (6, mm) Chain length / Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index PZ must be indicated on preassembled configurations Full set pivoting. D / Unsupported length / FL [m] Length of travel [m] R, 8 1,, -, F = + R D K 18 The required clearance height: F = + mm (with, kg/m fill weight) 6 D-CD files, configurators, PDF 7
22 E mini eries Product range Very large inner height, small outer width, asymmetric design 1 E mini eries ccessories Mounting brackets, polymer one-piece locking P(Z) 17 7, 1 16, 16, 1 7, 11...P(Z) 6, 11 eries One-piece, non snap-open e-chain e-chain non snap-open R ending radii Weight with without Dim. Dim R..R. 1,, ,, PZ.1PZ 1.1P.1P 6 6 upplement Part No. with required radius (R). Example: Dimensions Fill weight FL 1,/, 1 6 Inner height 1 mm Pitch, mm/link Links/m (6, mm) Chain length / Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index 1. 1 PZ must be indicated on preassembled configurations Full set locking. D / Unsupported length / FL [m] Length of travel [m] R,, 6-6 F = + R D K The required clearance height: F = + mm (with, kg/m fill weight) 8 D-CD files, configurators, PDF 9
23 1 E mini eries 1 Product range nap-open along inner radius, outer radius closed E mini eries 1 ccessories Mounting brackets, polymer one-piece locking More features P(Z) P(Z) , eries 1 One-piece, snap-open along inner radius with film-hinge nap-open along inner radius R ending radii Weight with without Dim. Dim R..R..R..R ,1,,, PZ 11..1PZ 11..1PZ 11..1PZ P 11..1P 11..1P 11..1P 6, 6, 9, 61, upplement Part No. with required radius (R). Example: Material mounting bracket - igumid G, temperature: - up to +1 C, VDE IIC UL9- Dimensions Fill weight Inner height mm Pitch, mm/link Links/m (6, mm) Chain length / 1 Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index PZ 1 must be indicated on preassembled configurations Full set pivoting. FL D / Unsupported length / FL [m] Length of travel [m] , R 8 - F = + R D K The required clearance height: F = + mm (with, kg/m fill weight) 6 D-CD files, configurators, PDF 61
24 1i 1 E mini eries 1i 1 Product range nap-open along inner and outer radius E mini eries 1i 1 ccessories Mounting brackets, polymer one-piece pivoting locking 696 1i 1...P(Z) /...1P(Z) 17 7, 1 16,...P(Z) /...P(Z i...1 6, 6, eries 1i snap-open along inner radius eries 1 along outer radius tandard 1././8./.**./6./7.* 7 nap-open along inner radius 1i. 1.R. 1i..R. 1i. 8.R. 1i..R. 1i..R. 1i. 6.R. 1i. 7.R. Dimensions Fill weight FL Unsupported length / FL [m] Length of travel [m] R D / R D K nap-open along outer radius 1. 1.R. 1..R R. 1..R. 1..R R R efore using this eries on long travels please consult igus R ending radii upplement Part No. with required radius (R). Example: i The required clearance height: F = + mm (with, kg/m fill weight) 17 D-CD files, configurators, PDF i,,,6,,6,7,76 Inner height 17 mm - 1,,,6,,6,7,76 Pitch, mm/link Links/m (6, mm) Chain length / F = PZ.PZ 8.PZ.PZ. PZ 6. PZ 7. PZ 1.P.P 8.P.P. P 6. P 7. P 1.1PZ.1PZ 8.1PZ.1PZ. 1PZ 6. 1PZ 7. 1PZ 1.1P.1P 8.1P.1P. 1P 6. 1P 7. 1P 8 6 8,, 8, 6, ** Drilling pattern for Part No. 1././8./. see drawing left. Each valid for moving end and fixed end * Drilling pattern for Part No../6./7. see drawing right. Each valid for moving end and fixed end 1 Interior separation 1, 8 1,,7 Full-width shelves pivoting: with without X Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index lotted separator for e-chains unassembled assembled ide plate for e-chains unassembled assembled Full-width shelf for e-chains unassembled assembled locking: Dim. with without X 111.X X unassembled assembled X unassembled assembled X unassembled assembled PZ must be indicated on preassembled configurations Full set pivoting lotted separator 1 Is used when vertical separation is required. Due to its slot, it allows basic vertical/horizontal shelving arrangements. ide plate 1 ide plate for use with full-width shelf 1.X and slotted separator1. Dim. Full-width shelf 1.X This option makes sense in applications with many thin cables with similar diameters. For a consequent subdivision. Fullwidth shelves can be arranged at different heights (in mm increments). 6
25 17i 17 E mini eries 17i 17 Product range nap-open along inner and outer radius E mini eries 17i 17 ccessories Mounting brackets, polymer one-piece locking 17i P(Z) P(Z)...17i...17 /9 /9,, eries 17i snap-open along inner radius eries 17 along outer radius tandard / nap-open along inner radius 17i. 1.R.** 17i..R. 17i..R. 17i..R. 17i..R.** 17i. 6.R.** 17i. 7.R.** FL Unsupported length / FL [m] Length of travel [m] D / R 8, R D K The required clearance height: F = + mm (with 1, kg/m fill weight) Radii for several widths available upon request (please see product range table above) R. 17..R. 17..R. 17..R. 17..R R R ,, 8, 6, ) ) 7 1) 1) 1 1) ) 7 1) 1 8* * ** available upon request, please consult igus for delivery time *Radius available upon request, please consult igus for delivery time 1) Radius only for eries 17. For eries 17i available upon request, please consult igus for delivery time upplement Part No. with required radius (R). Example: Dimensions Fill weight nap-open along outer radius R ending radii i i,,9,6,7,8,9 1,6 Inner height mm D-CD files, configurators, PDF ,,9,6,7,8,9 1,6 Pitch, mm/link Links/m (6, mm) Chain length / F = Full-width shelves 1, with PZ PZ PZ PZ PZ PZ PZ X P P P P P P P X 111.X X unassembled assembled X unassembled assembled X unassembled assembled Interior separation tandard Further interior separation elements lotted separator for 17.1 up to 17. unassembled assembled lotted separator for 17. bis 17.7 unassembled assembled Full-width shelf for e-chains unassembled assembled without Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index Dim PZ 1,, 8, 6, Drilling pattern for Part No.: center bores only / outer bores only (see figure above) Dim. 6 8 must be indicated on preassembled configurations Full set locking lotted separator 171 (17.1 up to 17.) Is used when vertical separation is required. Due to its slot, it allows basic vertical/horizontal shelving arrangements. lotted separator 17 (17. up to 17.7) Is used when vertical separation is required. Due to its slot, it allows basic vertical/horizontal shelving arrangements. Full-width shelf 1.X (for all widths) This option makes sense in applications with many thin cables with similar diameters. For a consequent subdivision. Fullwidth shelves can be arranged at different heights (in mm increments). 6
26 F17 E mini eries F17 Product range Large inner height, small outer width, outer radius closed E mini eries F17 ccessories Mounting brackets, polymer one-piece locking F P(Z) P(Z) , eries F17 One-piece, snap-open along inner radius with film-hinge nap-open along inner radius R ending radii Weight F17. 1.R * 7 * 1*, with without Dim PZ P 7,7 Dim. *Radius available upon request, please consult igus for delivery time upplement Part No. with required radius (R). Example: F Dimensions Fill weight FL Unsupported length / FL [m] Length of travel [m] R D / R 8 6* 7 * 1* D K The required clearance height: F = + mm (with, kg/m fill weight) * *Radius available upon request, please consult igus for delivery time 66 D-CD files, configurators, PDF 1, 9, Inner height mm Pitch, mm/link Links/m (6, mm) Chain length / 9-9 F = + Material mounting bracket - igumid G, temperature: - up to +1 C, VDE IIC UL9-1 Interior separation 1, 8 Full-width shelves X unassembled assembled X Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index lotted separator for e-chains unassembled R171 assembled R17 Full-width shelf e-chains /e-tubes unassembled 1.X assembled 111.X PZ 1 must be indicated on preassembled configurations Full set locking lotted separator R171 Is used when vertical separation is required. Due to its slot, it allows basic vertical/horizontal shelving arrangements. Full-width shelf 1.X This option makes sense in applications with many thin cables with similar diameters. For a consequent subdivision. Fullwidth shelves can be arranged at different heights (in mm increments). 67
27 E/ Introduction dvantages Universal: Many mounting options with or without strain relief Easy to assemble: Opening system from left or right igh stability: Large pin "snap fastener" with high clamping force llrounder for a wide range of applications - ystem E/ The E/ eries is igus fourth generation in this popular size range. ll past experiences went into this eries: easy and versatile assembly combined with ruggedness - high stability paired with quieter motion - long cable life and many fixation options. The design is consistent within all E/ variations. It is the standard product for machine builders around the world. E/ Features ccessories 18 nap-open mechanism, choice inged crossbar can be swiveled of snap-open on left or right by more than 18 on both sides ecure fit of separators and interior separation even when e-chain is open Long lifetime: Lateral gliding surfaces igh unsupported lengths: Due to a double, square stop dog Typical industries and applications Material handling Construction machinery Woodworking machines Glass machines Plastic machines Long travel applications in many industries emicon Theatre, entertainment and amusement parcs Vehicles General machinery Electrically conductive ED/TEX versions several eries available from stock alf e-tube - Fully enclosed in outer radius, choice of snap-open on left or right Fast closing by hand - secure fit without additional locking devices Rapid opening with a screwdriver or the e-chain opener Variations: e-chain or e-tube, openable at the inner or outer radius 6 d() tested in igus lab, v = 1, m/s unsupported, e.g. eries UL9-V classification upon request Open E/ in a flash with the e-chain opener train relief e.g. clamps,, nuggets and plug-in clips from page 66 Extender crossbars - Enormous increase of the interior IP Qualification Certificate - Report IG 1-6-1: IO Class, according to DIN EN IO 16-1 for ystem E/, eries at v =, / 1, /, m/s IP Qualification Certificate - Report IG 8-9: IO Class, according to DIN EN IO 16-1 for ystem E/, eries... at v =, m/s luminium"upertrough" - The igus standard guide trough from page 69 rol e-chain E/ - Rolling instead of gliding. Reduce driving force support tray kit. For support of the lower run from page 7 68 Discover the advantages 69
28 E/ election Table E/ Technical Data Overview eries Inner height Inner width Outer width Outer height ending radius Unsupported Page hi ha R length [m] Technical Data E/ e-chains tandard for ystem E snap-open along outer radius from both sides FL Gliding speed / acceleration (maximum) [m/s] / [m/s ] peed / acceleration [m/s] / [m/s ] peed / acceleration FL [m/s] / 6 [m/s ] , - 18, , , , , , Material - permitted temperature C, igumid G Flammability class, igumid G = with straight upper run FL = with permitted sag up to +1 C VDE IIC UL9- E/ e-chains snap-open along inner radius from both sides Installation methods overview, maximum travels , - 18, , , , , e-chain / e-tube eries Unsupported application Gliding application Vertical hanging Vertical standing ide mounted unsupported 1/1/1/18 1,7 m 7 m m, m,7 m Rotary application Zig-zag application Unsupported length lower run with rework upon request upon request ///8, m m m, m 1, m with rework upon request upon request alf e-tubes snap-open along inner radius from both sides 6/7/6/68,7 m 1 m m, m 1, m ///8, m 1 m 8 m, m 1, m with rework upon request upon request with rework upon request upon request , - 18, , , , , ,8 m m m, m 1, m with rework upon request upon request Full e-tubes snap-open along inner radius from both sides , - 18, , , , , D-CD files, configurators, PDF 71
29 E/ Order keys and Options E/ Order keys and Options Options with order keys based on eries ///8 tandard dditional noise dampening with pads NC-Version - (no camber) without pretension Reverse bending radius for circular movements Unsupported lengths +% possible No burning-in of hot chips up to +8 C (16 F) ED / TEX classified e-chains II GD Magnetically detectable plastic e-chains for the food- and tobacco industry Part No. tandard Part No. Low noise (with pads) Part No. NC-Version NC Part No. RR Part No. XXL-Material ) +% Part No. igumid T-Material only for e-tubes Part No. ED-Material Part No. igumid DT-Material..R...R...R..NC..R1/R...R..XXL 8..R..T..R..ED..R..DT e-chain snap-open along inner radius 1) e-chain snap-open along inner radius 1) e-chain snap-open along inner radius 1) e-chain snap-open along inner radius 1) e-chain snap-open along inner radius 1) Complete e-tube* e-chain snap-open along inner radius 1) e-chain snap-open along inner radius 1)..R...R...R..NC..R1/R...R..XXL 8.T.R...R..ED..R..DT e-chain snap-open along outer radius alf e-tube snap-open along inner radius 1) e-chain snap-open along outer radius e-chain snap-open along outer radius e-chain snap-open along outer radius ottom only* e-chain snap-open along outer radius e-chain snap-open along outer radius..r. alf e-tube snap-open along inner radius 1) 8..R. e-tube snap-open along inner radius 1)..R..NC alf e-tube snap-open along inner radius 1) RR for e-tubes - please consult igus..r..xxl alf e-tube snap-open along inner radius 1)..R..ED alf e-tube snap-open along inner radius 1)..R..DT alf e-tube snap-open along inner radius 1) 8..R. e-tube snap-open along inner radius 1) 8..R..NC e-tube snap-open along inner radius 1) RR for e-tubes - please consult igus 8..R..XXL e-tube snap-open along inner radius 1) 8..R..ED e-tube snap-open along inner radius 1) 8..R..DT e-tube snap-open along inner radius 1) Delivery from stock Delivery time: upon request 1) efore using this eries in gliding applications, please consult igus * vailable upon request, please consult igus for delivery time! Delivery time: upon request Delivery time: upon request ) pon request Delivery time: upon request ) Lower part made of XXL-Material Delivery time: upon request Delivery time: everal series from stock Delivery time upon request Order example based on eries ///8 Order key and colour options based on eries ///8 Order example for complete e-chain (1, m), colour black, with mounting brackets and interior separation: e-chain (1, m) Please indicate e-chain length or number of links: 1, m or links + Mounting brackets 1 set (with ) + Interior separation with separators assembled every nd link Order text: 1, m... +.PZ + x Part No. 11 Magnetically detectable plastic e-chains For the food- and tobacco industry The material igumid DT is detected to the tiniest fragment all common metal detection systems and can therefore be selected automatically Particles as small as 1. mm can be recognised for fragments passing at speeds of m/min More information x 11 Order key e-chain snap-open along outer radius e-chain snap-open along inner radius alf e-tube snap-open along inner radius Full e-tube snap-open along inner radius eries / Type index (depends on ) ending radius R Colour index (standard black) General igus colour options for e-chains and e-tubes Colours Order index Colours Order index lack tandard, from stock!. White for e-chains.1 /e-tubes late grey only ED material.ed Grey white for e-chains.1 /e-tubes Grey brown only T material.t Orange for e-chains. /e-tubes Grey only for e-chains. Yellow. for e-chains /e-tubes Dusty grey only for e-tubes.1 Light grey e-chains.1 /e-tubes lack e-chains available from stock! Delivery time for special colours: upon request 7 D-CD files, configurators, PDF 7
30 R. 1..R. 1..R R. 1..R R R. 1..R R R. 1) 1..R. 1) 1..R. 1) 1. 8.R. 1) 1..R. 1) R. 1) 1. 8.R. 1) 1..R R....1 e-chains eries 1 snap-open along inner radius e-chains eries 1 snap-open along outer radius e-chains snap-open along inner radius E/ e-chains 1 1 Product range mall radii, high stability e-chains snap-open along outer radius ,, 8, 1, 6, 81, 9, 11, 18, R ending radii ) ED/TEX version available from stock alf e-tubes, eries 1 and full e-tubes eries 18 from page 8 upplement Part No. with required radius (R). Example: ,6,7,9,,6,6,67,7,8 1,6,7,9,,6,6,67,7,8 E/ e-chains 1 1 Dimensions Unsupported applications hort travels Fill weight FL D 1... Unsupported length / FL [m] Length of travel [m].. 6. / 18 R 1 1 R D K , The required clearance height: F = + mm (with, kg/m fill weight) efore using eries 1 on long travels please consult igus. Gliding applications Long travels from m to 7 m CL = Offset fixed point / 1 8 / Inner height 1 mm K 7, 8 D Pitch, mm/link Links/m ( mm) Chain length / R F = + ED/TEX permanently conductive e-chains - 1 several widths with delivery from stock: Inner widths 1-8, radii R 8-1. Full ED product range Guide trough with glide bar Guide trough without glide bar RI Total length of guide trough Note: For long travel (gliding) applications, please consult igus. For long travels, igus specifies eries 1 that snaps open along the outer radius. In case of travels between and m we recommend a longer unsupported length. Chain length / Open e-chains in a flash with the igus e-chain opener Reduce assembly time from to sec. with the igus e-chain Opener. Open a long piece of e-chain in one go. Part No for eries 1/1. For widths :,, 68, 8,. More information and video R D K CL 179 efore using eries 1 on long travels please consult igus. 7 D-CD files, configurators, PDF 7
31 1 1 E/ e-chains 1 1 ccessories Mounting brackets, polymer pivoting locking E/ e-chains 1 1 ccessories Mounting brackets, polymer pivoting PZ / 1...1PZ, , 8, 19, ø 6, ø 11,8/ 1...PZ / 1...PZ, 1, 1, 1, 1...PZ() ø 6, 1 7, 7, ø, ø, 1...PZ() 1 ø 6, -7 depending on radius Polymer pivoting Recommended for unsupported and gliding applications tandard Polymer locking Recommended for vertical hanging and standing applications Polymer pivoting Recommended for unsupported and gliding applications For tight installation conditions pivoting: with locking: with Dim. Dim. pivoting: with without Dim. Dim PZ 1.PZ 1.PZ 18.PZ 1.PZ 168.PZ 18.PZ 1.PZ 11.PZ 11.1PZ 1.1PZ 1.1PZ 18.1PZ 1.1PZ 168.1PZ 18.1PZ 1.1PZ 11.1PZ ,, 8, 1, 6, 81, 9, 11, 18, PZ 1..PZ 1.8.PZ 1.8.PZ 1..PZ 1..PZ 1.68.PZ 1.68.PZ 1.8.PZ 1.8.PZ 1..PZ 1..PZ 1.1.PZ* 1.1.PZ* *Tiewrap plate (consists of x.z) does not snap on but needs to be bolted down separately Note: Mounting brackets not to assemble at the gable end Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index PZ 1 must be indicated on preassembled configurations Full set pivoting = 1 Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index PZ1 must be indicated on preassembled configurations Full set pivoting = Option: teel locking Part No For e-chains and e-tubes available Locked connections One part (-piece) for all e-chain widths Electrically conductive train relief e.g. clamps,, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 66 train relief e.g. clamps,, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page D-CD files, configurators, PDF
32 1 1 E/ e-chains 1 1 ccessories Interior separation New generation E/ e-chains 1 1 Further ccessories 1 1 Previous interior separation with optional elements X - 6 mm 9,, 9, X 1..1 No lateral spacing to side links necessary. s standard separators are assembled every nd e-chain link., 1.1 tandard separator, wide base unassembled 1.1 assembled tandard - for any application eparator with wide base for maximum locking strength and safe standing in e-chains., 1. eparator, narrow head unassembled assembled For even faster installation Firm hold to one side with a wide base, narrow on opposed side for easy cable assembly. E/ eries 1 in aircraft refuelling truck - telescopic crane with six sections, 1. eparator, narrow base unassembled assembled For many thin cables eparator with a narrow base for a large number of thin cables side by side. aves space in e-chains., 1, 6, 1. eparator, asymmetrical unassembled assembled For side-mounted applications symmetrical separator, for defined distance. No additional spacers necessary., X -1 Full-width shelf, lockable unassembled.x assembled.x orizontal separation Full-width shelf locks safely into separators on both ends, fixed width possible. eparators can be moved freely over the shelf in horizontal direction. Can be used at one height. Lockable full-width shelves - for the standard interior separation eparator with integrated strain relief train relief separator Part No. 1.1.Z can be integrated into the mounting bracket and can be placed at any point of the e-chain. It combines strain relief and interior separation, it can be installed on the first or last e-chain link and is easy to assemble without any screws. More information from page 676 X unassembled assembled X unassembled assembled X unassembled assembled Optional: upport tray kit - for support of the lower run imple one-piece support trays according to your requirements and specification Easy installation onto your machine, on profiles or wall-mount brackets igus support tray - available in types and options More information from page D-CD files, configurators, PDF
33 R R. 1...R.** 18...R.** 1...R R R R. 1...R R R R R R. 1...R R R R. 8,, 8, 1, 6, 81, 9, 11, 18,...18 alf e-tubes eries 1 snap-open along inner radius, closed along outer radius Full e-tubes eries 18 snap-open along inner radius, fully enclosed alf e-tubes snap-open along inner radius E/ e-tubes 1 18 Product range Chip protection Full e-tubes snap-open along inner radius ** available upon request, please consult igus for delivery time *Radius available upon request, please consult igus for delivery time For radii, 8, 8 the e-tube is not fully enclosed. Please consult igus. R ending radii upplement Part No. with required radius (R). Example: * 8* 8* * 8* 8* * 8* 8* * 8* 8* * 8* 8* * 8* 8* * 8* 8* * 8* 8* * 8* 8* ,8,1,,9,6,7,8,9 1, 1 18,,1,7,61,67,77,8,9 1,8 E/ e-tubes 1 18 Dimensions Unsupported applications hort travels Fill weight FL D 1... Unsupported length / FL [m] Length of travel [m] R * 8* 8* D K R 1/18, 1 8 / The required clearance height: F = + mm (with, kg/m fill weight) *Radius available upon request, please consult igus for delivery time efore using eries 1/18 on long travels please consult igus. 7, 66 Inner height 1 mm Pitch, mm/link Links/m ( mm) Chain length / F = + Open e-chains in a flash with the igus e-chain opener Reduce assembly time from to sec. with the igus e-chain Opener. Open a long piece of e-chain in one go. Part No for eries 1. For widths :,, 68, 8,. More information and video 8 D-CD files, configurators, PDF
34 1 18 E/ e-tubes 1 18 ccessories Mounting brackets, polymer pivoting locking E/ e-tubes 1 18 ccessories Mounting brackets, polymer pivoting PZ / 1...1PZ, , 8, 19, ø 6, ø 11,8/ 1...PZ / 1...PZ, 1, 1, 1, 1...PZ() ø 6, 1 7, 7, ø, ø, 1...PZ() 1 ø 6, -7 depending on radius Polymer pivoting Recommended for unsupported applications tandard Polymer locking Recommended for vertical hanging and standing applications Polymer pivoting Recommended for unsupported applications For tight installation conditions pivoting: with locking: with Dim. Dim. pivoting: with without Dim. Dim PZ 1.PZ 1.PZ 18.PZ 1.PZ 168.PZ 18.PZ 1.PZ 11.PZ 11.1PZ 1.1PZ 1.1PZ 18.1PZ 1.1PZ 168.1PZ 18.1PZ 1.1PZ 11.1PZ ,, 8, 1, 6, 81, 9, 11, 18, PZ 1..PZ 1.8.PZ 1.8.PZ 1..PZ 1..PZ 1.68.PZ 1.68.PZ 1.8.PZ 1.8.PZ 1..PZ 1..PZ 1.1.PZ* 1.1.PZ* *Tiewrap plate (consists of x.z) does not snap on but needs to be bolted down separately Note: Mounting brackets not to assemble at the gable end Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index PZ 1 must be indicated on preassembled configurations Full set pivoting = 1 Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index PZ1 must be indicated on preassembled configurations Full set pivoting = Option: teel locking Part No For e-chains and e-tubes available Locked connections One part (-piece) for all e-chain widths Electrically conductive train relief e.g. clamps,, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 66 train relief e.g. clamps,, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 66 8 D-CD files, configurators, PDF 8
35 1 18 E/ e-tubes 1 18 ccessories Interior separation E/ e-tubes 1 18 Further ccessories ,,7,7 1 9,,7, X No lateral spacing to side links necessary. s standard separators are assembled every nd e-chain link. 1, 8 lotted separator for e-tubes unassembled 11 assembled 111 lotted separator 11 Is used when vertical separation is required. Due to its slot, it allows basic vertical/horizontal shelving arrangements. X Full-width shelf for e-tubes unassembled 1.X assembled 111.X Full-width shelf 1.X This option makes sense in applications with many thin cables with similar diameters. For a consequent subdivision. Fullwidth shelves can be arranged at different heights (in,7 mm increments). Installation-optimised delivery of an igus readychain - here system E/ Full-width shelves X unassembled assembled X unassembled assembled X unassembled assembled Optional: upport tray kit - for support of the lower run imple one-piece support trays according to your requirements and specification Easy installation onto your machine, on profiles or wall-mount brackets igus support tray - available in types and options More information from page 7 8 D-CD files, configurators, PDF 8
36 ... E/ e-chains Product range llrounder, high stability... E/ e-chains Dimensions Unsupported applications hort travels Fill weight FL D 66 7 Inner height mm Pitch 6 mm/link Links/m (1 mm) Chain length / 1. / e-chains eries snap-open along inner radius e-chains eries snap-open along outer radius e-chains snap-open along inner radius e-chains snap-open along outer radius R ending radii Unsupported length / FL [m] Length of travel [m].. 6. R F = +..R...R...R.. 7.R.. 9.R...R.. 1.R...R. 1)..R. 1)..R. 1). 7.R. 1). 9.R. 1)..R. 1). 1.R. 1) ,77,8,91 1,1 1,8 1,1 1,,77,8,91 1,1 1,8 1,1 1, R D K The required clearance height: F = + mm (with 1, kg/m fill weight) efore using eries on long travels please consult igus. 1) ED/TEX version available from stock alf e-tubes, eries and full e-tubes eries 8 from page 9 Non snap-open e-chains E medium classics, eries upplement Part No. with required radius (R). Example:... Gliding applications Long travels from m to m / / CL = Offset fixed point K D R ED/TEX permanently conductive e-chains - several widths with delivery from stock: Inner widths - 1, radii R Full ED product range Guide trough with glide bar Guide trough without glide bar RI Total length of guide trough Note: For long travel (gliding) applications, please consult igus. For long travels, igus specifies eries that snaps open along the outer radius. In case of travels between and m we recommend a longer unsupported length. Chain length / Open e-chains in a flash with the igus e-chain opener Reduce assembly time from to sec. with the igus e-chain Opener. Open a long piece of e-chain in one go. Part No for eries /. For widths :, 7, 9 More information and video R D K CL efore using eries on long travels please consult igus. 86 D-CD files, configurators, PDF
37 + 1 - E/ e-chains ccessories Mounting brackets, polymer pivoting locking E/ e-chains ccessories KM mounting brackets ttachment on all sides pivoting locking...pz()+ /...1PZ()+ 1/...PZ() /...PZ() / / 1... Frontal view of KM 1, ø, 8 6,1 t = = + 19, 8 9, 8,, = Polymer pivoting Recommended for unsupported and gliding applications tandard Polymer locking Recommended for vertical hanging and standing applications KM pivoting Recommended for unsupported and gliding applications KM locking Recommended for vertical hanging and standing applications pivoting: with without locking: with without Dim. KM pivoting: with without KM locking: with without Dim. Dim PZ+.PZ+.PZ+ 7.PZ+ 9.PZ+.PZ+ 1.PZ+.PZ+.PZ+.PZ+ 7.PZ+ 9.PZ+.PZ+ 1.PZ+.1PZ+.1PZ+.1PZ+ 7.1PZ+ 9.1PZ+.1PZ+ 1.1PZ+.1PZ+.1PZ+.1PZ+ 7.1PZ+ 9.1PZ+.1PZ+ 1.1PZ Z 1..1Z 1..1Z 1.7.1Z 1.9.1Z 1..1Z 1.1.1Z Z 1..1Z 1..1Z 1.7.1Z 1.9.1Z 1..1Z 1.1.1Z Full set with tiewrap plate + cable tiewraps, please add index K1+ e.g..pzk1+ (KM = Polymer Metal Mounting racket) 1 Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index PZ+ 1 must be indicated on preassembled configurations Full set pivoting = These attachment types are set automatically in the choice of the KM mounting bracket. For the preassembled mode please add index Z must be indicated on preassembled configurations Full set with strain relief index KM pivoting Option: teel pivoting Part No.. - For e-chains and e-tubes available Pivoting connections One part (-piece) for all e-chain widths Electrically conductive train relief e.g. clamps,, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 66 train relief e.g. clamps,, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page D-CD files, configurators, PDF
38 E/ e-chains ccessories Interior separation New generation e-chains Further ccessories Extender crossbars Previous interior separation with optional elements X - 6 mm,9..d6 9,9..D6 /1.1 9, 1 ø6 1 1, ø6 1,, No lateral spacing to side links necessary. s standard separators are assembled every nd e-chain link...1.x..1.xx 7 7, 119, Extender crossbars - Enormous increase of the interior for the smooth guiding of larger hoses. uitable for hoses with an outer diameter of 6 mm.,,.1. tandard separator, wide base unassembled assembled eparator, narrow head unassembled assembled tandard - for any application eparator with a wide base for maximum locking strength and safe standing in e-chains. For even faster installation Firm hold to one side with a wide base, narrow on opposed side for easy cable assembly. Extender crossbars for e-chains snap-open Extender crossbars for e-chains snap-open R ending radii along inner radius. D6.R.. D6.R. along outer radius. D6.R.. D6.R * * *Radius only possible with e-chains eries upplement Part No. with required radius (R). Example:.D6.. Interior separation for extender crossbars,. eparator, narrow base unassembled assembled...1 For many thin cables eparator with a narrow base for a large number of thin cables side by side. aves space in e-chains., 7 1 /1.1 tandard separator, wide base unassembled /1.1 assembled /1.1.1 tandard separator, wide base For maximum locking strength and safe standing. In standard configuration separators are assembled every nd link., 1,, 6, X -1. eparator, asymmetrical unassembled. assembled..1 Full-width shelf, lockable unassembled.x assembled.x Lockable full-width shelves - for the standard interior separation X unassembled assembled X unassembled assembled X unassembled assembled For side-mounted applications symmetrical separator, for defined distance. No additional spacers necessary. orizontal separation Full-width shelf locks safely into separators on both ends, fixed width possible. eparators can be moved freely over the shelf in horizontal direction. Can be used at one height , X -1 Full-width shelf, lockable unassembled.x assembled.x eparator with integrated strain relief train relief separator Part No..Z can be integrated into the mounting bracket and can be placed at any point of the e-chain. It combines strain relief and interior separation, it can be installed on the first or last e-chain link and is easy to assemble without any screws. More information from page 676 Optional: upport tray kit - for support of the lower run imple one-piece support trays according to your requirements and specification Easy installation onto your machine, on profiles or wall-mount brackets igus support tray - available in types and options More information from page 7 orizontal separation Full-width shelf locks safely into separators on both ends, fixed width possible. eparators can be moved freely over the shelf in horizontal direction. Can be arranged at different heights. Product range left page 9 D-CD files, configurators, PDF
39 8... E/ e-tubes 8 Product range Chip protection...8 E/ e-tubes 8 Dimensions Unsupported applications hort travels Fill weight FL D /8 66 Inner height mm 8 Pitch 6 mm/link Links/m (1 mm) Chain length / 1. / alf e-tubes eries snap-open along inner radius, closed along outer radius Full e-tubes eries 8 snap-open along inner radius, fully enclosed alf e-tubes snap-open along inner radius Full e-tubes snap-open along inner radius R ending radii Unsupported length / FL [m] Length of travel [m].. 6. R F = +..R...R...R.. 7.R.. 9.R...R.. 1.R. 8..R. 8..R. 8..R R R. 8..R R * * * * * * 7* * ,8,88,99 1,1 1, 1,7 1,,8,9 1, 1,17 1,6 1, 1, R * D K The required clearance height: F = + mm (with 1, kg/m fill weight) *Radius available upon request, please consult igus for delivery time efore using eries /8 on long travels please consult igus. *Radius available upon request, please consult igus for delivery time Radii : the e-tube is not completely enclosed. Please consult igus upplement Part No. with required radius (R). Example:... Open e-chains in a flash with the igus e-chain opener Reduce assembly time from to sec. with the igus e-chain Opener. Open a long piece of e-chain in one go. Part No for eries. For widths :, 7, 9 More information and video 9 D-CD files, configurators, PDF 9
40 + 1-8 E/ e-tubes 8 ccessories Mounting brackets, polymer pivoting locking E/ e-tubes 8 ccessories KM mounting brackets ttachment on all sides pivoting locking 8...PZ()+ /...1PZ()+ 1/...PZ() /...PZ() 17 1 = 1...1/ = 1.../ = / = 81.../ Frontal view of KM 1, ø, 8 6,1 t = = , = , 8, 8, 1 Polymer pivoting Recommended for unsupported applications tandard Polymer locking Recommended for vertical hanging and standing applications pivoting: with without.pz+.pz+.pz+ 7.PZ+ 9.PZ+.PZ+ 1.PZ+.PZ+.PZ+.PZ+ 7.PZ+ 9.PZ+.PZ+ 1.PZ+.1PZ+.1PZ+.1PZ+ 7.1PZ+ 9.1PZ+.1PZ+ 1.1PZ+ Full set with tiewrap plate + cable tiewraps, please add index K1+ Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index locking: with without.1pz+.1pz+.1pz+ 7.1PZ+ 9.1PZ+.1PZ+ 1.1PZ+ e.g..pzk1+. PZ+ 1 Dim must be indicated on preassembled configurations Full set pivoting = KM pivoting Recommended for unsupported applications KM locking Recommended for vertical hanging and standing applications KM pivoting: KM locking: Dim. Dim. with without with without Z Z Z Z Z Z Z Z Z Z Z Z Z Z KM pivoting: Part No for half e-tube eries / Part No for full e-tube eries 8 KM locking: Part No for half e-tube eries / Part No for full e-tube eries 8 (KM = Polymer Metal Mounting racket) These attachment types are set automatically in the choice of the KM mounting bracket. For the preassembled mode please add index Z must be indicated on preassembled configurations Full set with strain relief index KM pivoting Option: teel pivoting Part No.. - For e-chains and e-tubes available Pivoting connections One part (-piece) for all e-chain widths Electrically conductive train relief e.g. clamps,, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 66 train relief e.g. clamps,, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 66 9 D-CD files, configurators, PDF 9
41 8 E/ e-tubes 8 ccessories Interior separation e-tubes Further ccessories Extender crossbars 8,9 9,9..D6..D6, 7, 11, 11, 9, 1 ø6 1 ø X No lateral spacing to side links necessary. s standard separators are assembled every nd e-chain link. 7 7, 119, Extender crossbars only for eries - Enormous increase of the interior for the smooth guiding of larger hoses. uitable for hoses with an outer diameter of 6 mm. lotted separator for e-tubes unassembled 1 assembled 11 lotted separator 1 Is used when vertical separation is required. Due to its slot, it allows basic vertical/horizontal shelving arrangements. Extender crossbars for half e-tubes snap-open along inner radius. D6.R.. D6.R R ending radii , X-1 Full-width shelves X unassembled assembled X unassembled assembled X unassembled assembled Full-width shelf for e-tubes unassembled.x assembled 1.X Full-width shelf.x This option makes sense in applications with many thin cables with similar diameters. For a consequent subdivision. Fullwidth shelves can be arranged at different heights (in mm increments). upplement Part No. with required radius (R). Example:.D6.. eparator with integrated strain relief train relief separator Part No..ZR can be integrated into the mounting bracket and can be placed at any point of the e-chain. It combines strain relief and interior separation, it can be installed on the first or last e-chain link and is easy to assemble without any screws. More information from page 676 Optional: upport tray kit - for support of the lower run imple one-piece support trays according to your requirements and specification Easy installation onto your machine, on profiles or wall-mount brackets igus support tray - available in types and options More information from page 7 96 D-CD files, configurators, PDF
42 E/ e-chains 6 7 Product range Medium inner height, high stability...7 E/ e-chains 6 7 Dimensions Unsupported applications hort travels Fill weight FL Inner height mm 6 7 Pitch 6 mm/link Links/m 18 (8 mm) Chain length / 1. D / e-chains eries 6 snap-open along inner radius e-chains eries 7 snap-open along outer radius e-chains snap-open along inner radius e-chains snap-open along outer radius R ending radii Unsupported length / FL [m] Length of travel [m].. 6. R F = + 6..R R R R. 6..R R R R. 7..R. 1) 7. 6.R. 1) 7. 7.R. 1) 7. 9.R. 1) 7..R. 1) 7. 1.R. 1) 7. 1.R R ) ED/TEX version available from stock alf e-tubes, eries 6 and full e-tubes eries 68 from page Non snap-open e-chains E medium classics, eries 6 upplement Part No. with required radius (R). Example: ,17 1, 1, 1,7 1,9 1,8 1,6 1,8 1,17 1, 1, 1,7 1,9 1,8 1,6 1,8 R D K The required clearance height: F = + mm (with, kg/m fill weight) efore using eries 6 on long travels please consult igus. Gliding applications Long travels from m to 1 m / CL = Offset fixed point / K D R ED/TEX permanently conductive e-chains - 7 several widths with delivery from stock: Inner widths - 1, radii R 6-1. Full ED product range Guide trough with glide bar Guide trough without glide bar RI Total length of guide trough Note: For long travel (gliding) applications, please consult igus. For long travels, igus specifies eries 7 that snaps open along the outer radius. In case of travels between and m we recommend a longer unsupported length. Chain length / Open e-chains in a flash with the igus e-chain opener Reduce assembly time from to sec. with the igus e-chain Opener. Open a long piece of e-chain in one go. Part No for eries 6/7. For widths : 6, 7, 9, More information and video R D K CL efore using eries 6 on long travels please consult igus. 98 D-CD files, configurators, PDF
43 11, E/ e-chains 6 7 ccessories Mounting brackets, polymer pivoting locking E/ e-chains 6 7 ccessories KM mounting brackets ttachment on all sides pivoting locking PZ() / 6...1PZ() 6...PZ() / 6...PZ() 16/ Frontal view / / of KM ø, ø, t = 8 6,1 t = = + 8 = + 8 = + 19 = = , 7 7 8, 19 Polymer pivoting Recommended for unsupported and gliding applications tandard Polymer locking Recommended for vertical hanging and standing applications KM pivoting Recommended for unsupported and gliding applications KM locking Recommended for vertical hanging and standing applications pivoting: with without locking: with without Dim. KM pivoting: with C-profile without C-profile KM locking: with C-profile without C-profile Dim. Dim PZ 66.PZ 67.PZ 69.PZ 6.PZ 61.PZ 61.PZ 617.PZ 6.PZ 66.PZ 67.PZ 69.PZ 6.PZ 61.PZ 61.PZ 617.PZ 6.1PZ 66.1PZ 67.1PZ 69.1PZ 6.1PZ 61.1PZ 61.1PZ 617.1PZ 6.1PZ 66.1PZ 67.1PZ 69.1PZ 6.1PZ 61.1PZ 61.1PZ 617.1PZ C C C C C C C C C C C C C C C C Full set with tiewrap plate + cable tiewraps, please add index K1 1 Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index e.g. 6.PZK1 6. PZ 1 must be indicated on preassembled configurations Full set pivoting = KM pivoting to one side: / (KM = Polymer Metal Mounting racket) These attachment types are set automatically in the choice of the KM mounting bracket. For the preassembled mode please add index C must be indicated on preassembled configurations Full set with integrated C-profile index KM pivoting Option: teel locking Part No For e-chains and e-tubes available Locked connections One part (-piece) for all e-chain widths Electrically conductive train relief e.g. clamps,, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 66 train relief e.g. clamps,, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 66 D-CD files, configurators, PDF 1
44 6 7 E/ e-chains 6 7 ccessories Interior separation New generation Previous interior separation with optional elements e-chains 6 7 Further ccessories Extender crossbars 6 7 X - 6 mm (X - 1 mm) D D8 /6.1 18,1 7.1.D8 /6.1,, 17, 17, 7 ø8 6 ø8 ø New..1 No lateral spacing to side links necessary. s standard separators are assembled every nd e-chain link , 7 X tandard separator, wide base unassembled.1 assembled.1.1 eparator, narrow head unassembled assembled eparator, narrow base unassembled assembled eparator, asymmetrical unassembled. assembled..1 Notch separator, lockable unmontiert. montiert..1 Full-width shelf, lockable unassembled.x assembled.x..1.x..1 tandard - for any application eparator with a wide base for maximum locking strength and safe standing in e-chains. For even faster installation Firm hold to one side with a wide base, narrow on opposed side for easy cable assembly. For many thin cables eparator with a narrow base for a large number of thin cables side by side. aves space in e-chains. For side-mounted applications symmetrical separator, for defined distance. No additional spacers necessary. New in this catalogue Locks safely in, mm increments Notch separator for exact positioning in e-chains. Recommended for side-mounted applications. orizontal separation Full-width shelf locks safely into separators on both ends, fixed width possible. To be used as full-width shelf for a consequent subdivision or as shelf for a pattern system in levels D8.R D8.R D8.R. 7 91, D8.R D8.R D8.R., 68 6 X -1 / , unassembled /6.1 assembled /6.1.1.X Extender crossbars - Enormous increase of the interior for the smooth guiding of larger hoses. uitable for hoses with an outer diameter of 8 mm. Extender crossbars for e-chains snap-open along inner radius Extender crossbars for e-chains snap-open along outer radius *Radius only possible with e-chains eries upplement Part No. with required radius (R). Example: 7.1D8.. Interior separation for extender crossbars tandard separator, wide base Full-width shelf, lockable unassembled.x assembled.x eparator with integrated strain relief train relief separator Part No. 6.Z can be integrated into the mounting bracket and can be placed at any point of the e-chain. It combines strain relief and interior separation, it can be installed on the first or last e-chain link and is easy to assemble without any screws. More information from page 676 R ending radii 1 166,.X 6* 7* * 7* * 7* tandard separator, wide base For maximum locking strength and safe standing. In standard configuration separators are assembled every nd link. orizontal separation Full-width shelf locks safely into separators on both ends, fixed width possible. eparators can be moved freely over the shelf in horizontal direction. Can be arranged at different heights. Lockable fullwidth shelves X unassembled assembled X unassembled assembled X unassembled assembled Optional: upport tray kit - for support of the lower run imple one-piece support trays according to your requirements and specification Easy installation onto your machine, on profiles or wall-mount brackets igus support tray - available in types and options More information from page 7 D-CD files, configurators, PDF
45 E/ e-tubes 6 68 Product range Chip protection...68 E/ e-tubes 6 68 Dimensions Unsupported applications hort travels Fill weight FL 6/68 66 Inner height mm 6 68 Pitch 6 mm/link Links/m 18 (8 mm) Chain length / 1. D / alf e-tubes eries 6 snap-open along inner radius, closed along outer radius Full e-tubes eries 68 snap-open along inner radius, fully enclosed alf e-tubes snap-open along inner radius Full e-tubes snap-open along inner radius R ending radii Unsupported length / FL [m] Length of travel [m].. 6. R F = + 6..R R R R. 6..R R R R. 68..R R R R. 68..R R R R * 7* * 7* * 7* * 7* * 7* * 7* * 7* * 7* , 1,6 1, 1, 1,61 1,7 1,8, 1, 1, 1,1 1,6 1,81 1,99,17, R 6* 7* D K The required clearance height: F = + mm (with, kg/m fill weight) *Radius available upon request, please consult igus for delivery time efore using eries 6/68 on long travels please consult igus. *Radius available upon request, please consult igus for delivery time Radii 6, 7: the e-tube is not completely enclosed. Please consult igus upplement Part No. with required radius (R). Example: 6... Open e-chains in a flash with the igus e-chain opener Reduce assembly time from to sec. with the igus e-chain Opener. Open a long piece of e-chain in one go. Part No for eries 6. For widths : 6, 7, 9, More information and video D-CD files, configurators, PDF
46 11, E/ e-tubes 6 68 ccessories Mounting brackets, polymer pivoting locking E/ e-tubes 6 68 ccessories KM mounting brackets ttachment on all sides pivoting locking PZ() / 6...1PZ() 6...PZ() / 6...PZ() 16/ = 6...1/ = 6.../ = / = 68.../68... ø, Frontal view of KM ø, t = 8 6,1 t = = + 8 = + 8 = + 19 = = , 7 7 8, 19 Polymer pivoting Recommended for unsupported applications tandard Polymer locking Recommended for vertical hanging and standing applications pivoting: with without 6.PZ 66.PZ 67.PZ 69.PZ 6.PZ 61.PZ 61.PZ 617.PZ 6.PZ 66.PZ 67.PZ 69.PZ 6.PZ 61.PZ 61.PZ 617.PZ locking: with without 6.1PZ 66.1PZ 67.1PZ 69.1PZ 6.1PZ 61.1PZ 61.1PZ 617.1PZ Full set with tiewrap plate + cable tiewraps, please add index K1 Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index PZ 66.1PZ 67.1PZ 69.1PZ 6.1PZ 61.1PZ 61.1PZ 617.1PZ e.g. 6.PZK1 6. PZ 1 Dim must be indicated on preassembled configurations Full set pivoting = KM pivoting Recommended for unsupported applications KM locking Recommended for vertical hanging and standing applications KM pivoting: with C-profile without C-profile C C C C C C C C KM locking: with C-profile without C-profile C C C C C C C C KM pivoting: Part No for half e-tube eries 6 / Part No for full e-tube eries 68 KM locking: Part No for half e-tube eries 6 / Part No for full e-tube eries 68 (KM = Polymer Metal Mounting racket) These attachment types are set automatically in the choice of the KM mounting bracket. For the preassembled mode please add index C Dim must be indicated on preassembled configurations Full set with integrated C-profile index KM pivoting Dim. Option: teel locking Part No For e-chains and e-tubes available Locked connections One part (-piece) for all e-chain widths Electrically conductive train relief e.g. clamps,, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 66 train relief e.g. clamps,, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 66 6 D-CD files, configurators, PDF 7
47 6 68 E/ e-tubes 6 68 ccessories Interior separation New generation New in this catalogue for e-tubes Previous interior separation with optional elements e-tubes 6 Further ccessories Extender crossbars 6 68 X - 6 mm (X - 1 mm) D D8 /6.1 18,1 7.1.D8 /6.1,, 17, 17, 7 ø8 6 ø8 ø New..1 No lateral spacing to side links necessary. s standard separators are assembled every nd e-chain link , 7 X tandard separator, wide base unassembled.1 assembled.1.1 eparator, narrow head unassembled assembled eparator, narrow base unassembled assembled eparator, asymmetrical unassembled. assembled..1 Notch separator, lockable unmontiert. montiert..1 Full-width shelf, lockable unassembled.x assembled.x..1.x..1 tandard - for any application eparator with a wide base for maximum locking strength and safe standing in e-chains. For even faster installation Firm hold to one side with a wide base, narrow on opposed side for easy cable assembly. For many thin cables eparator with a narrow base for a large number of thin cables side by side. aves space in e-chains. For side-mounted applications symmetrical separator, for defined distance. No additional spacers necessary. New in this catalogue Locks safely in, mm increments Notch separator for exact positioning in e-chains. Recommended for side-mounted applications. orizontal separation Full-width shelf locks safely into separators on both ends, fixed width possible. To be used as full-width shelf for a consequent subdivision or as shelf for a pattern system in levels. Extender crossbars for half e-tubes snap-open along inner radius 6. 7 D8.R D8.R D8.R. 7 91, 1, 68 6 X -1 / , Extender crossbars only for eries 6 - Enormous increase of the interior for the smooth guiding of larger hoses. uitable for hoses with an outer diameter of 8 mm tandard separator, wide base unassembled /6.1 assembled /6.1.1 Full-width shelf, lockable unassembled.x assembled.x.x upplement Part No. with required radius (R). Example: 6.1D8.. Interior separation for extender crossbars Optional: upport tray kit - for support of the lower run imple one-piece support trays according to your requirements and specification Easy installation onto your machine, on profiles or wall-mount brackets igus support tray - available in types and options More information from page 7 R ending radii 1 166, X tandard separator, wide base For maximum locking strength and safe standing. In standard configuration separators are assembled every nd link. orizontal separation Full-width shelf locks safely into separators on both ends, fixed width possible. eparators can be moved freely over the shelf in horizontal direction. Can be arranged at different heights. Lockable fullwidth shelves D-CD files, configurators, PDF 9
48 ... E/ e-chains Product range Large inner height, high stability... E/ e-chains Dimensions Unsupported applications hort travels Fill weight FL Inner height mm Pitch 67 mm/link Links/m 1 ( mm) Chain length / 1. D / e-chains eries snap-open along inner radius e-chains eries snap-open along outer radius e-chains snap-open along inner radius e-chains snap-open along outer radius R ending radii Unsupported length / FL [m] Length of travel [m].. 6. R F = +..R.. 7.R...R.. 11.R.. 1.R.. 1.R.. 17.R...R...R...R...R.. 7.R...R.. 11.R.. 1.R.. 1.R.. 17.R...R...R...R alf e-tubes, eries and full e-tubes eries 8 from page 16 upplement Part No. with required radius (R). Example:.7.. 1,6 1,78 1,9 1,99,,17,8,,9,7 1,6 1,78 1,9 1,99,,17,8,,9,7 R D K The required clearance height: F = + mm (with, kg/m fill weight) efore using eries on long travels please consult igus. Gliding applications Long travels from m to 1 m / CL = Offset fixed point / K D R Guide trough with glide bar Guide trough without glide bar RI Total length of guide trough Note: For long travel (gliding) applications, please consult igus. For long travels, igus specifies eries that snaps open along the outer radius. In case of travels between 6 and m we recommend a longer unsupported length. Chain length / Open e-chains in a flash with the igus e-chain opener Reduce assembly time from to sec. with the igus e-chain Opener. Open a long piece of e-chain in one go. Part No for eries /. For widths :, 7,, 11. More information and video R D K CL efore using eries on long travels please consult igus. D-CD files, configurators, PDF
49 E/ e-chains ccessories Mounting brackets, polymer pivoting locking E/ e-chains ccessories KM mounting brackets ttachment on all sides pivoting locking...pz() /...1PZ()...PZ() /...PZ() Frontal view 1/ /1... of KM 16/ ø, ø, t = 8 8, t = 8 + = +1 = +1 = + = +1 = Polymer pivoting Recommended for unsupported and gliding applications tandard Polymer locking Recommended for vertical hanging and standing applications pivoting: with without.pz 7.PZ.PZ 11.PZ 1.PZ 1.PZ 17.PZ.PZ.PZ.PZ.PZ 7.PZ.PZ 11.PZ 1.PZ 1.PZ 17.PZ.PZ.PZ.PZ locking: with without.1pz 7.1PZ.1PZ 11.1PZ 1.1PZ 1.1PZ 17.1PZ.1PZ.1PZ.1PZ Full set with tiewrap plate + cable tiewraps, please add index K1 Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index PZ 7.1PZ.1PZ 11.1PZ 1.1PZ 1.1PZ 17.1PZ.1PZ.1PZ.1PZ e.g..pzk1 7. PZ 1 Dim must be indicated on preassembled configurations Full set pivoting = KM pivoting Recommended for unsupported and gliding applications KM locking Recommended for vertical hanging and standing applications KM pivoting: with C-profile without C-profile 1..1.C C C C C C C C C C 1..1 KM pivoting to one side: 1... / 1... (KM = Polymer Metal Mounting racket) KM locking: with C-profile without C-profile 1..1.C C C C C C C C C C 1..1 These attachment types are set automatically in the choice of the KM mounting bracket. For the preassembled mode please add index C Dim Dim must be indicated on preassembled configurations Full set with integrated C-profile index KM pivoting Option: teel pivoting Part No..1 - For e-chains and e-tubes available Pivoting connections One part (-piece) for all e-chain widths Electrically conductive train relief e.g. clamps,, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 66 train relief e.g. clamps,, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 66 1 D-CD files, configurators, PDF 1
50 E/ e-chains ccessories Interior separation New generation e-chains Further ccessories Extender crossbars Previous interior separation with optional elements X - 6 mm (X - 1 mm)..d D8.XX /8.1,,, 99, 8 ø8 ø x..1 1 No lateral spacing to side links necessary. s standard separators are assembled every nd e-chain link. Extender crossbars - Enormous increase of the interior for the smooth guiding of larger hoses. uitable for hoses with an outer diameter of 8 mm tandard separator, wide base unassembled assembled eparator, narrow head unassembled assembled tandard - for any application eparator with a wide base for maximum locking strength and safe standing in e-chains. For even faster installation Firm hold to one side with a wide base, narrow on opposed side for easy cable assembly. Extender crossbars for e-chains snap-open Extender crossbars for e-chains snap-open R ending radii along inner radius. D8.R.. D8.R. along outer radius. D8.R.. D8.R. 1 7* * 1 1 7* * 1 1 *Radius 7 and only possible with e-chains eries upplement Part No. with required radius (R). Example:.D8.. Interior separation for extender crossbars 7. eparator, narrow base unassembled assembled...1 For many thin cables eparator with a narrow base for a large number of thin cables side by side. aves space in e-chains /8.1 tandard separator, wide base unassembled /8.1 assembled /8.1.1 tandard separator, wide base For maximum locking strength and safe standing. In standard configuration separators are assembled every nd link.. 1, 9 X -1. eparator, asymmetrical unassembled. assembled..1 Full-width shelf, lockable unassembled.x assembled.x Lockable full-width shelves - for the standard interior separation X unassembled assembled X unassembled assembled X unassembled assembled For side-mounted applications symmetrical separator, for defined distance. No additional spacers necessary. orizontal separation Full-width shelf locks safely into separators on both ends, fixed width possible. To be used as full-width shelf for a consequent subdivision or as shelf for a pattern system in levels , X -1 Full-width shelf, lockable unassembled.x assembled.x eparator with integrated strain relief train relief separator Part No. 1.Z can be integrated into the mounting bracket and can be placed at any point of the e-chain. It combines strain relief and interior separation, it can be installed on the first or last e-chain link and is easy to assemble without any screws. More information from page 676 Optional: upport tray kit - for support of the lower run imple one-piece support trays according to your requirements and specification Easy installation onto your machine, on profiles or wall-mount brackets igus support tray - available in types and options More information from page 7 orizontal separation Full-width shelf locks safely into separators on both ends, fixed width possible. eparators can be moved freely over the shelf in horizontal direction. Can be arranged at 7 different heights. 1 D-CD files, configurators, PDF 1
51 8... E/ e-tubes 8 Product range Chip protection...8 E/ e-tubes 8 Dimensions Unsupported applications hort travels Fill weight FL / Inner height mm 8 Pitch 67 mm/link Links/m 1 ( mm) Chain length / 1. D / alf e-tubes eries snap-open along inner radius, closed along outer radius Full e-tubes eries 8 snap-open along inner radius, fully enclosed alf e-tubes snap-open along inner radius Full e-tubes snap-open along inner radius R ending radii Unsupported length / FL [m] Length of travel [m].. 6. R F = +..R.. 7.R...R.. 11.R.. 1.R.. 1.R.. 17.R...R...R...R. 8..R R. 8..R R R R R. 8..R. 8..R. 8..R * * 1 1 7* * 1 1 7* * 1 1 7* * 1 1 7* * 1 1 7* * 1 1 7* * 1 1 7* * 1 1 7* * 1 1 7* * 1 1 1,77 1,9,1,,,6,7,9,1, 1,96,7,,6,9,6,8,9,1,8 R 7* * D K The required clearance height: F = + mm (with, kg/m fill weight) *Radius available upon request, please consult igus for delivery time efore using eries /8 on long travels please consult igus. *Radius available upon request, please consult igus for delivery time Radii 7, : the e-tube is not completely enclosed. Please consult igus upplement Part No. with required radius (R). Example:.7.. Open e-chains in a flash with the igus e-chain opener Reduce assembly time from to sec. with the igus e-chain Opener. Open a long piece of e-chain in one go. Part No for eries. For widths :, 7,, 11. More information and video 16 D-CD files, configurators, PDF
52 8 E/ e-tubes 8 ccessories Mounting brackets, polymer pivoting locking E/ e-tubes 8 ccessories KM mounting brackets ttachment on all sides pivoting locking 8...PZ() /...1PZ()...PZ() /...PZ() 16/ = /...1 = /... 8 = 8/ = 8/8... ø, Frontal view of KM ø, t = 8 8, t = 8 + = +1 = +1 = + = +1 = Polymer pivoting Recommended for unsupported applications tandard Polymer locking Recommended for vertical hanging and standing applications pivoting: locking: with without with without.pz 7.PZ.PZ 11.PZ 1.PZ 1.PZ 17.PZ.PZ.PZ.PZ.PZ 7.PZ.PZ 11.PZ 1.PZ 1.PZ 17.PZ.PZ.PZ.PZ.1PZ 7.1PZ.1PZ 11.1PZ 1.1PZ 1.1PZ 17.1PZ.1PZ.1PZ.1PZ Full set with tiewrap plate + cable tiewraps, please add index K1 Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index PZ 7.1PZ.1PZ 11.1PZ 1.1PZ 1.1PZ 17.1PZ.1PZ.1PZ.1PZ e.g..pzk1 7. PZ 1 Dim must be indicated on preassembled configurations Full set pivoting = KM pivoting Recommended for unsupported applications KM locking Recommended for vertical hanging and standing applications KM pivoting: KM locking: Dim. Dim. with C-profile without C-profile with C-profile without C-profile C C 8..1.C C C C C 8..1.C 8..1.C 8..1.C C C 8..1.C C C C C 8..1.C 8..1.C 8..1.C KM pivoting: Part No.... for half e-tube eries / Part No for full e-tube eries 8 KM locking: Part No.... for half e-tube eries / Part No for full e-tube eries 8 (KM = Polymer Metal Mounting racket) These attachment types are set automatically in the choice of the KM mounting bracket. For the preassembled mode please add index C must be indicated on preassembled configurations Full set with integrated C-profile index KM pivoting Option: teel pivoting Part No..1 - For e-chains and e-tubes available Pivoting connections One part (-piece) for all e-chain widths Electrically conductive train relief e.g. clamps,, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 66 train relief e.g. clamps,, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page D-CD files, configurators, PDF
53 8 E/ e-tubes 8 ccessories Interior separation New generation e-tubes Further ccessories Extender crossbars 8 Previous interior separation with optional elements X - 6 mm (X - 1 mm)..d D8.XX /8.1 99, 8 ø8 ø8,,, No lateral spacing to side links necessary. s standard separators are assembled every nd e-chain link...1.x..1 1 Extender crossbars only for eries - Enormous increase of the interior for the smooth guiding of larger hoses. uitable for hoses with an outer diameter of 8 mm. 1.1 tandard separator, wide base unassembled.1 assembled.1.1 tandard - for any application eparator with a wide base for maximum locking strength and safe standing in e-chains. Extender crossbars for half e-tubes snap-open along inner radius. D8.R.. D8.R. 1 R ending radii eparator, narrow head unassembled assembled...1 For even faster installation Firm hold to one side with a wide base, narrow on opposed side for easy cable assembly. upplement Part No. with required radius (R). Example:.D8.. Interior separation for extender crossbars 7. eparator, narrow base unassembled assembled...1 For many thin cables eparator with a narrow base for a large number of thin cables side by side. aves space in e-chains /8.1 tandard separator, wide base unassembled /8.1 assembled /8.1.1 tandard separator, wide base For maximum locking strength and safe standing. In standard configuration separators are assembled every nd link.. 1, 9 X -1. eparator, asymmetrical unassembled. assembled..1 Full-width shelf, lockable unassembled.x assembled.x Lockable full-width shelves - for the standard interior separation X unassembled assembled X unassembled assembled X unassembled assembled For side-mounted applications symmetrical separator, for defined distance. No additional spacers necessary. orizontal separation Full-width shelf locks safely into separators on both ends, fixed width possible. To be used as full-width shelf for a consequent subdivision or as shelf for a pattern system in levels , X -1 Full-width shelf, lockable unassembled.x assembled.x eparator with integrated strain relief train relief separator Part No. 1.Z can be integrated into the mounting bracket and can be placed at any point of the e-chain. It combines strain relief and interior separation, it can be installed on the first or last e-chain link and is easy to assemble without any screws. More information from page 676 Optional: upport tray kit - for support of the lower run imple one-piece support trays according to your requirements and specification Easy installation onto your machine, on profiles or wall-mount brackets igus support tray - available in types and options More information from page 7 orizontal separation Full-width shelf locks safely into separators on both ends, fixed width possible. eparators can be moved freely over the shelf in horizontal direction. Can be arranged at 7 different heights. D-CD files, configurators, PDF 1
54 E medium eries Product range mall pitch, smooth running E medium eries Dimensions Unsupported applications hort travels Fill weight Inner height mm Pitch 7,8 mm/link Links/m 6 (,8 mm) Chain length / 1. FL D / eries nap-open along outer radius nap-open along inner radius R ending radii Weight Unsupported length / FL [m] Length of travel [m].. 6. R +6 7,8 - F = +..R...R.. 7.R...R ,81,9 1,1 1,1 R D K The required clearance height: F = + mm (with 1, kg/m fill weight) Gliding applications Long travels from m to m / / D upplement Part No. with required radius (R). Example:... CL = Offset fixed point K R Guide trough with glide bar Guide trough without glide bar RI Total length of guide trough Note: For long travel (gliding) applications, please consult igus. In case of travels between and m we recommend a longer unsupported length. Chain length / R D K CL * 8 *Values upon request D-CD files, configurators, PDF
easy chain zipper system E2 E2 e-tubes system E4 igus e-chainsystems clean room universal and modular
universal and modular systems e-chainsystems igus 16 17 clean room system E4 E e-tubes system E zipper easy chain easy chain Introduction dvantages easy chain election Table Universal: Mounting bracket
More informationigus e-chainsystems universal and modular
igus e-chainsystems universal and modular 6 7 Introduction dvantages election table Universal: mounting bracket with strain relief option ave time: simply press cables in without opening and closing crossbars
More informationSeries 17 Introduction
zipper e-chains Series Introduction 3 Mounting bracket with strain relief option e-chain zip-open along outer radius Fast opening, large inner height When to use Series E mini: If an e-chain with an inner
More informationLight, highly flexible and low-vibration
T3 Light, highly flexible and low-vibration Advantages of the T3 system: Very low weight e-chain For high speeds and accelerations Virtually no polygon effect Small bend radii and installation space Fast,
More informationSeries 09 Introduction
09 zipper e-chains Series 09 Introduction Mounting bracket with strain relief option e-chain zip-open along outer radius Lightweight and stable For high accelerations Small pitch for low-noise, smooth
More informationE2 mini Series 10 Introduction
E2 mini Series Introduction 18 Stable and cost-effective Mounting bracket with strain relief option One-piece design, non snap-open Lightweight and stable Large pin for high stability When to use the Series
More informationE2 e-tubes. Protection against dirt and debris 6.0
E2 e-tubes Protection against dirt and debris 6.0 6.1 E2 e-tubes - protection in environments with dirt and debris E2 Series R100 and Series R Since igus introduced the first openable e-tubes in the mid-1980`s,
More informationE6 Series E6.52 R6.52 Delivery program Extremely low-noise, minimum vibration, medium size
E6 Series Delivery program Extremely low-noise, minimum vibration, medium size... crossbars every 2 nd link... fully enclosed e-chains Series crossbars every 2 nd link (crossbars removable along both radii)
More informationE2 mini Series 14 Introduction
E2 mini Series Introduction 20 Mounting bracket with strain relief option Snap-open along inner radius When to use the Series E2 mini: If an e-chain with an inner height of 20 mm and small bending radii
More informationigus System E6 extremely low-noise, minimum vibration and abrasion, cleanroom suitable
igus System E6 extremely low-noise, minimum vibration and abrasion, cleanroom suitable 916 917 Extremely low-noise, minimum vibration and abrasion, clean room suitable - System E6 The E6 Series offers
More informationeasy chain Series E26 Z26
easy chain Series 36,5 36,5 Price index IPA Qualification Certificate: Air Cleanless Class ISO Class 2 (at v = 1 m/s) upon request UL94-V2 classifications Torsional motion possible Special equipment: Electrically
More informationE2/
1400 E2/000 1400 21 21 Price index IPA Qualification Certificate Air Cleanless Class ISO Class 3 (at v = 2 m/s) upon request ESD classification: Electrically conductive ESD/ATEX version upon request UL94
More informationE2/000 Series
E2/000 Series 35 35 Price index IPA Qualification Certificate Air Cleanless Class ISO Class 3 (at v = 2 m/s) upon request ESD classification: Electrically conductive ESD/ATEX version upon request UL94
More informationeasy chain Series E200 Z200
easy chain Series Price index IPA Qualification Certificate: Air Cleanless Class ISO Class 2 (at v = 1 m/s) upon request UL94-V2 classifications Torsional motion possible Special equipment: Electrically
More informationEnergy Chain System E2 Medium Series 200/240/250
Energy Chain System E2 Medium //.98.98.98 Price Index Features & Benefits Dirt-repellent contoured exterior // Cable-friendly, smooth interior with modular interior separation Special Features / Options
More informationE2 Medium - E-Chains with 2-part link design for a wide range of applications
igus E2 Medium E2 Medium - E-Chains with 2-part link design for a wide range of applications E2 Medium - the standard The E2 Medium Series is the largest of the E2 family of E-Chains features snap-open
More informationEnergy Chain Systems E2 medium
Energy Chain Systems E2 medium E2 medium Series // Series 26/27/27i Series 340/350* *Extender chain 2 parts per link, maximum Easy installation Many connection options Long service life High stability
More informationUniversal applications for igus Energy Chains
140 Energy Chains are the umbilical cord of modern machines. igus has been developing, producing and testing polymer Energy Chains since 1971. Our expert knowledge is being refined continuously with the
More informationQuick, zipper-like installation
07 Product Range: Series 07 "Zipper" 10,3 igus Energy Chain Systems Price Index 8 Widths 3 Bending Radii Product Range: Inner Widths (Bi) in mm: 6, 10, 16, 20, 30, 40, 50, 64 Bending Radii (R) in mm: 018,
More informationE4.1 Series E4.56 Introduction
E.1 Series Introduction 56 56 All-sides attachment Optional with noise dampening pads 60 db(a) Stable due to undercut design, large inner height When to use Series : If a robust e-chain /e-tube with an
More information07) D-US SYSTEM E4 204S :57 Uhr Seite
7.0 E4 7.1 System E4 4-piece E-Chains Modular and robust E4/00 Standard System E4/00 Your first choice in E4 - The standard broad application spectrum Low noise - Noise reduction with TÜV certificate (Series
More informationEnergy Chain system E4-1 Series E4-56/H4-56/R4-56
Energy Chain system E4-1 // Clean- oom Price Index Special Options Available Assembly Tips Low noise version available with special rubber pads Cleanroom test upon request ESD classification: Electrically
More information02A)-D-EU-IT-TRIFLEX SOLO- G :25 Uhr Seite 30 for 3D-applications easy triflex 2.30
for 3D-applications easy triflex 2.30 2.31 easy triflex - e-chain for 3D-applications The triflex Series was developed to realize safe energy supply in the case of multi-dimensional movements. In doing
More information02)-D-EU-TWISTER-KOMPLETT- G :04 Uhr Seite
2.56 New generation: robust, low-noise, for high loads twisterchain new 2.57 NEW in this catalog New generation - twisterchain new: robust, low-noise, for high loads Higher loads and smoother running igus
More informationigus TwisterChain NEW Second Generation: robust, low-noise, for high loads
igus TwisterChain NEW Second Generation: robust, low-noise, for high loads TwisterChain New robust, low-noise, for high loads Higher loads and smoother running igus new generation of TwisterChain circular
More information.e.chain ../ / ystems. ...e.chains /readychain.complete system/
.e.chain../ / /. ystems....e.chains /readychain.complete system/ Overview E-Chains... 26 8 46 48 4 6 31 27 5 29 29 14 41 13 3 15 42 3 34 23 36 40 16 38 30 12 18 11 37 32 7 45 33 47 22 21 19 44 25 35 9
More informationCaring for cables. Types of installation
Caring for cables Cable carriers guide and protect cables and hoses on moving machinery, and prevent tangling or damage from debris or contact with the machine itself. Proper use of a cable carrier extends
More informationEnergy Chain Systems Triflex R Energy Tubes
Energy Chain Systems Triflex R Energy Tubes Multi-Dimensional Movement Energy Chains For Robotic Applications Triflex R Triflex R Series A modular, multi-axis, energy-supply protection system Triflex R:
More informationKP35 series VARIABLE INNER DISTRIBUTION QUICK AND EASY TO OPEN ROBUST ALL-ROUNDER
KP35 series VARIABLE INNER DISTRIBUTION QUICK AND EASY TO OPEN ROBUST ALL-ROUNDER Robust all-rounder with variable inner distribution 2 height mm widths 50 mm Pitch 35 mm Additional load up to 2 kg/m Travel
More informationSelection BASIC LINE BASIC LINEPLUS
PLUS 108 0115 Extremely quick cable laying thanks to flexible lamella crossbars 0115 PLUS Very fast cable laying by simply pressing in Very high utilization factor due to flexible crossbars swivelling
More informationguide trough systems aluminium SuperTrough steel guide trough support tray guidefast guidelite tubular trough snap-in trough
guide trough systems aluminium SuperTrough steel guide trough support tray guidefast guidelite tubular trough snap-in trough 682 683 Guide troughs Aluminium Steel Guide troughs Further trough systems The
More informationMONO series. Cable carriers for standard applications. Subject to change.
Cable carriers for standard applications 104 Trademarks are legally protected for the TSUBAKI KABELSCHLEPP GmbH as a national or international registration in the following countries: Trademarks Overview
More informationQUICKTRAX Specifications are subject to change without notice. KSA-0810-GC
24 24.02 A member of the TSUBAKI GROUP light weight cost-effective standard widths QuickTrax Compact and cost-effective cable carriers in two-component technology Extremely fast and easy cable laying installation
More informationMultiLine MP 44. System overview. 1 Chain bracket. 2 Shelving system. Chain bracket angle. Separator TR. Chain bracket U-part
MultiLine MP 44 System overview 1 Chain bracket 2 Shelving system Chain bracket angle Separator TR Chain bracket U-part 2 1 122 Guide channels Technical data Aluminium VAW Stainless steel VAW-E Loading
More informationMONO series. Cable carriers for standard applications. Subject to change.
MONO Cable carriers for standard applications 70 Trademarks are legally protected for the TSUBAKI KABELSCHLEPP GmbH as a national or international registration in the following countries: Trademarks MONO
More informationxirodur B180 Axial Ball Bearings Product Range
axial ball bearing xirodur B180 xial Ball Bearings Product Range Order key BB-510-B180-ES stainless steel balls glass balls GL = glass ES = stainless steel Material xirodur B180 Dimensions acc. to DIN
More informationguide trough systems aluminum, steel and other troughs
guide trough systems aluminum, steel and other troughs 1176 1177 Guide Troughs Aluminum Guide Troughs Steel sic-version: Fast assembly Heavy-Version: plant manufacturing: www.igus.eu/eu/salun Aluminum
More informationMultiLine MP 35. System overview. 1 Chain bracket. 2 Shelving system. Chain bracket angle. Separator TR. Chain bracket U-part. H-shaped shelf unit RE
System overview 1 Chain bracket 2 Shelving system Chain bracket angle Separator TR Chain bracket U-part H-shaped shelf unit RE 2 1 96 Guide channels Technical data Aluminium VAW Stainless steel VAW-E Loading
More informationXLT series. Tubes with variable cable carrier widths. Subject to change.
Tubes with variable cable carrier widths Trademarks are legally protected for the TSUBAKI KABELSCHLEPP GmbH as a national or international registration in the following countries: tsubaki-kabelschlepp.com/trademarks
More informationUNIFLEX Advanced Specifications are subject to change without notice. KSA-0810-GC
24 24.18 A member of the TSUBAKI GROUP nylon open style standard widths Light, quiet all-rounder with wide range of applications* Cost-effective cable carrier Weight-optimized chain geometry Particularly
More informationCABLE DRAG CHAIN SYSTEMS MP 36 G
CABLE DRAG CHAIN SYSTEMS MP 36 G murrplastik Systemtechnik GmbH Postfach 1143 D-71567 Oppenweiler Tel. +49 (0) 7191/482-0 Fax +49 (0) 7191/482-280 www.murrplastik.de info@murrplastik.de 259 Order variants
More informationMultiLine MP 36G. System overview. 1 Chain bracket. 2 Shelving system. Chain bracket U-part. Separator TR. End brackets flange
MultiLine MP 36G System overview 1 Chain bracket 2 Shelving system Chain bracket U-part Separator TR End brackets flange 2 1 106 Guide channels Technical data Aluminium VAW Stainless steel VAW-E Loading
More informationCABLE DRAG CHAIN SYSTEMS
CABLE DRAG CHAIN SYSTEMS MP 15 murrplastik Systemtechnik GmbH Postfach 1143 D-71567 Oppenweiler Tel. +49 (0) 7191/482-0 Fax +49 (0) 7191/482-280 www.murrplastik.de info@murrplastik.de 61 Order variants
More informationSelection BASIC LINE BASIC LINE PLUS VARIO LINE SERIES TUBE LINE
PLUS 332 - Steel cable carriers solutions for extreme applications PLUS Robust design for heavy mechanical loads High additional loads and long unsupported lengths possible Best suited for extreme and
More informationCable drag chain systems
able drag chain systems MP 45.1, MP 45.2 New chain series 45 interior height With additional noise reduction 1 System overview MultiLine MP 45.1 MP 45.2 open 1 hain bracket 2 Strain relief hain bracket
More informationCable drag chain systems MP 3000
Cable drag chain systems MP 3000 1 MULTILINE MP 3000 OPEN LOW-COST VARIANT CHAIN BRACKET WITH INTEGRATED STRAIN RELIEF TECHNICAL DATA Loading side Inside bend Available radii 50.0 300.0 Available interior
More informationXL series. Cable carrier with large inside height. Subject to change.
XL series Cable carrier with large inside height Trademarks are legally protected for the TSUBAKI KABELSCHLEPP GmbH as a national or international registration in the following countries: tsubaki-kabelschlepp.com/trademarks
More informationVARITRAK LS/LSX SIMPLE Stroke system is integrated in the chain link plate no additional bolts are needed
RELIABLE Optional central bolts for applications with high loads* SIMPLE Stroke is integrated in the chain link plate no additional bolts are needed FLEXIBLE Various cable separation options LIGHT Weight-optimized
More informationSpecifications are subject to change without notice. KSA-L15015-GC
A member of the TSUBAKI GROUP nylon open style standard widths EasyTrax Extremely quick cable installation, extra-stable thanks to two-component technology Very fast cable installation by simply pressing
More informationNIFLEX Advanced series PLASTIC CABLE CARRIERS UNIVERSAL AND WITH MANY VARIANTS WITH BALL JOINT
NIFLEX series PLASTIC CABLE CARRIERS UNIVERSAL AND WITH MANY VARIANTS WITH BALL JOINT series Light, quiet all-rounder with a wide range of applications* 2 * Some features can be different for certain types
More informationSelection BASIC LINE BASIC LINE PLUS VARIO LINE SERIES TUBE LINE STEEL LINE
PLUS 250 Extremely robust and stable steel chains* PLUS Extremely robust and stable steel chains for heavy mechanical loads and harsh environmental conditions Very long unsupported lengths also for large
More informationCable drag chain systems MP 32
Cable drag chain systems MP 32 1 MP 32 OPEN PLASTIC OR ALUMINIUM VERSION FLEXIBLE CHAIN BRACKET BROAD INTERIOR LAYOUT TECHNICAL DATA Loading side Inside and outside bend MP CLASSIC Available radii 80.0
More informationCable drag chain systems MP 35
Cable drag chain systems MP 35 1 MULTILINE MP 35 OPEN METAL CHAIN BRACKET LOW-COST VARIANT TECHNICAL DATA Loading side Inside bend Available radii 70.0 300.0 Available interior widths With plastic frame
More informationCable drag chain systems MP 25G
Cable drag chain systems MP 25G 1 MP 25G CLOSED MULTILINE CLOSED VARIANTS, STARTING WITH R60 COMPACT DESIGN TECHNICAL DATA Loading side Outside bend Available radii 60.0 250.0 Available interior widths
More information02A)-D-EU-IT-TRIFLEX SOLO- G :24 Uhr Seite 4 R -robotic e-chains 3D triflex 2.4
3D-robotic e-chains triflex R 2.4 2.5 triflex R - 3-dimensional e-chains for robots triflex R (R for "round") is the third generation of multi-axis e-chains. Design features include: Optional fibre rod
More informationtriflex R Series TRE Easy to fill
10-43,3 triflex R Series Easy to fill - "Easy" Design - simply press cables in High tensile strength thanks to special ball-and-socket principle Able to move multi-dimensionally - Twist up to approx. ±
More informationData sheet chainflex CFSOFT1
to 5 x d Highly flexible, soft design PVC outer jacket Oil-resistant Flame retardant 1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Core insulation: Mechanically high-quality TPE mixture
More informationSelection BASIC LINE BASIC LINE PLUS VARIO LINE
PLUS 182 Cable carrier with large inside PLUS Large dimensions Low intrinsic weight TÜV design approved in accordance with 2PfG 1036/10.97 Stable end connector made of steel Can be quickly opened on the
More informationData sheet chainflex CF6
1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Extremely bending-stable braid made of tinned copper wires 3. Inner jacket: Pressure extruded, gusset-filling PVC mixture
More informationData sheet chainflex CF140.UL
1. Outer jacket: Pressure extruded PVC mixture 2. Overall shield: Bending-resistant braiding made of tinned copper wires 3. Inner jacket: Pressure extruded, gusset-filling PVC mixture 4. CFRIP: Tear strip
More informationData sheet chainflex CF130.UL
1. Outer jacket: Pressure extruded, gusset-filling PVC mixture 2. CFRIP: Tear strip for faster cable stripping 3. Core insulation: Mechanically high-quality TPE mixture 4. Conductor: Fine-wire strand consisting
More informationCable drag chain systems
able drag chain systems MP 45.1, MP 45.2 New chain series 45 interior height With additional noise reduction 1 MP 45.1 OPN MP 45.2 MULTLN OPN LOW-OST VRNT SOT-STOP SYSTM SUTL OR UNVRSL US N RKT WT NTRT
More informationData sheet chainflex CF10
1. Outer jacket: Pressure extruded, halogen-free TPE mixture 2. Overall shield: Extremely bending-resistant braiding made of tinned copper wires 3. Inner jacket: Pressure extruded, gusset-filling TPE mixture
More informationSelection BASIC LINE BASIC LINE PLUS VARIO LINE SERIES TUBE LINE
PLUS 332 - Steel cable carriers solutions for extreme applications PLUS Robust design for heavy mechanical loads High additional loads and long unsupported lengths possible Best suited for extreme and
More informationThe Separator arrangements depend on the application (see order example or separator options).
SLE Energy chains individual solutions large dimensions simple handling The order for a steel chain SLE should contain the following data: Type / Radius x Length / Width - Connector Arrangement ; Separator
More informationHahn Serie 60 AT. Universal hinge for versatile application. More modern look Improved technology
Hahn Serie 60 AT Universal hinge for versatile application! More modern look Improved technology 2 4 5 6 7 8 9 2 3 4 5 6 7 8 9 2 Hahn Serie 60 AT For all doors made from metal profile sections NEW! Uniform
More information9.96. guidelok horizontal
9.96 guidelok horizontal guidelok horizontal Upper run guide for long travels, self-supporting Upper run guide for long travels, self-supporting in chip areas Especially for long travels on machine tools,
More informationigubal Pressfit Spherical Bearings Easy to fit Extremely cost-effective Chemical-resistant Light weight High strength
igubal Pressfit Spherical earings Easy to fit Extremely cost-effective Chemical-resistant Light weight High strength 791 igubal Pressfit Spherical earings The use of pivoting s is usually associated with
More informationData sheet chainflex CF5
1. Outer jacket: Pressure extruded, gusset-filling, oilresistant PVC mixture 2. Core insulation: Mechanically high-quality TPE or PVC mixture 3. CFRIP: Tear strip for faster cable stripping 4. Conductor:
More informationNylon Cable Chains Light Series
s Light Series Series S00 page 40 Series S50L-S50LI-S50LE page 4 Series S0090-S0091-S009 page 44 Series S5LI/LE page 46 Series S5L page 48 Series S5L-S5LI-S5LE page 50 Series S9 page 5 Channel guide for
More informationContents. EasyLine EFK MultiLine EFK 14. MultiLine EFK MultiLine EFK MultiLine EFK 35. MultiLine EFK page 201.
Contents Cable drag chain systems open EasyLine EFK 10.1 page 201 MultiLine EFK 14 page 206 MultiLine EFK 18.1 page 210 MultiLine EFK 18.2 page 214 MultiLine EFK 35 page 218 MultiLine EFK 3000 page 224
More informationCABLE DRAG CHAIN SYSTEMS
CABLE DRAG CHAIN SYSTEMS MP 41.2 murrplastik Systemtechnik GmbH Postfach 1143 D-71567 Oppenweiler Tel. +49 (0) 7191/482-0 Fax +49 (0) 7191/482-280 www.murrplastik.de info@murrplastik.de 153 Order variants
More informationData sheet chainflex CF9
1. Outer jacket: Pressure extruded, gusset-filling, halogenfree TPE mixture 2. CFRIP: Tear strip for faster cable stripping 3. Core insulation: Mechanically high-quality TPE mixture 4. Conductor: Stranded
More informationDeep-Groove Ball Bearings, Axial, Multi-Axis, Shields and More... ..plastics
4. xiros........... Deep-Groove Ball Bearings, Axial, Multi-Axis, Shields and More.....plastics xiros xiros Application Examples Exciting applications can be viewed online at www.igus.eu/xiros-applications
More informationSLE SLE CHARACTERISTICS. Travel. Travel speed. Acceleration. Temperature. Special types. closed + open. application fields SLE
SLE SLE applications 81 SLE dimensions 82 SLE types 84 SLE sizes 86 SLE parts 87 SLE assembly 88 SLE connectors 83 SLE part numbers 92 SLE accessories 98 load / (kg/m) inner height / (mm) 60 LOAD DIAGRAM
More informationData sheet chainflex CF8821
1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Braiding made of tinned copper wires 3. Overall banding: Plastic foil 4. Core insulation: Mechanically high-quality TPE
More informationCable drag chain systems
able drag chain systems MP 45.1, MP 45.2 New chain series 45 interior height With additional noise reduction 1 MP 45.1 OPN MP 45.2 MULTLN OPN RU-OST SOT-STOP SYSTM UNVRSL US N RKT WT NTRT STRN RL RO NTROR
More informationWarehousing...Distribution Centers... Logistics. andling. plastics for longer life ECS-B12
aterial Warehousing...Distribution Centers... Logistics andling plastics for longer life... www.igus.com/materialhandling 1 ECS-B12 igus products... Maintenance-free plastic products in indoor and outdoor
More informationS/SX Tubes series Extremely robust and sturdy covered steel cable carriers
S/SX Tubes Extremely robust and sturdy covered steel cable carriers Trademarks are legally protected for the TSUBAKI KABELSCHLEPP GmbH as a national or international registration in the following countries:
More informationCable drag chain systems MP 41.2, MP 41.3
Cable drag chain systems MP 41.2, MP 41.3 1 POWERLINE MP 41.2 OPEN MP 41.3 CLOSED SLIDING BLOCKS FOR LONGER SERVICE LIFE BROAD INTERIOR LAYOUT FLEXIBLE CHAIN BRACKET PLASTIC OR ALUMINIUM VERSION TECHNICAL
More informationCable drag chain systems MP 35.1, MP 35.2
able drag chain systems MP 35.1, MP 35.2 1 MP 35.1 OPN MP 35.2 MULTLN OPN LOW-OST VRNT SOT-STOP SYSTM SUTL OR UNVRSL US N RKT WT NTRT STRN RL XTNSV N SY TO NSTLL NTROR LYOUT 49 35 30 68-193 TNL T Loading
More informationHelaGuard. Non-Metallic Conduit & Fittings
HelaGuard Non-Metallic Conduit & Fittings HelaGuard Non-Metallic Conduit Systems Page HelaGuard Overview 3 Conduit Application Overview 4 Mounting & Removing HelaGuard Non-Metallic Fittings 5 HelaGuard
More informationigubal Pressfit Spherical Bearings Easy to fit Extremely cost-effective Chemical-resistant Light weight High strength
igubal Pressfit Spherical earings Easy to fit Extremely cost-effective Chemical-resistant Light weight High strength 629 igubal Pressfit Spherical earings The use of pivoting s is usually associated with
More informationSelection BASIC LINE BASIC LINE PLUS VARIO LINE
PLUS 152 Multivariable cable carrier with extensive accessories and stay variants* TÜV design approved in accordance with 2PfG 1036/10.97** Universal connectors (UMB) 87 PLUS Aluminum stays with ball joint
More informationSpecifications are subject to change without notice. KSA-L15015-GC-A
Specifications are subject to change without notice A member of the TSUBAKI GROUP nylon open style standard widths Light, quiet all-rounder with wide range of applications* Cost-effective cable carrier
More informationPLE PLE CHARACTERISTICS. Travel. Travel speed. Acceleration. Temperature. Special versions APPLICATION AREAS. PLE max.
PLE load / (kg/m) inner height / (mm) 66 24 20 16 12 8 4 118 115 80 50 30 16 7 0 0 7 PL E 220 PL E 3 2 0 PLE 520 closed + open PL E 620 2 4 6 8 free carrying length Lf / (m) PLE max. 6 m free carrying
More informationthe power to innovate Steel cable carriers Subject to change.
the power to innovate Steel cable carriers 177 Steel cable carriers The solution for extreme applications. Cable carriers with chainbands made of galvanized steel or of high-grade stainless steel Maximum
More informationCable Management Solutions. HelaGuard. Non-Metallic Conduits and Fittings
Cable Management Solutions HelaGuard Non-Metallic Conduits and Fittings Table of Contents Page HelaGuard Overview 4 Conduit Application Overview 6 Mounting & Removing HelaGuard Non-Metallic Fittings 7
More informationROBOTRAX System. Cable carrier for 3D movements. Subject to change.
System Cable carrier for 3D movements Trademarks are legally protected for the TSUBAKI KABELSCHLEPP GmbH as a national or international registration in the following countries: tsubaki-kabelschlepp.com/trademarks
More informationData sheet chainflex CF886
1. Outer jacket: Pressure extruded PVC mixture 2. Overall shield: Braiding made of tinned copper wires 3. Shield foil: Aluminium clad plastic foil 4. Banding: Plastic foil 5. Filling: Plastic yarns 6.
More informationdrylin N Low-Profile Guide Systems
drylin N Low-Profile Guide Systems Low-profile height and width Replaceable polymer sliding pads Anodised aluminium rail High speed and acceleration possible Lubrication-free Low weight 925 drylin N drylin
More informationtensioning systems 107
Tensioning systems 107 TENSIONING SYSTEMS TABLE OF CONTENTS Table of Contents 108 Introduction 109 Function, Principles, Handling 110 Optical Control Displays 111 Spann-Box Overview 112 113 Signs and Symbols
More informationChain and Belt Tensioning Systems
Chain and Belt Tensioning Systems Chain and Belt Tensioning Systems 121 TENSIONING SYSTEMS TABLE OF CONTENTS Introduction 123 Function, Principles, Handling 124 Optical Control Displays 125 Chain and Belt
More informationData sheet chainflex CF240
1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Aluminum/Polyester tape and extremely bending-resistant braiding made of tinned copper wires. 3. Banding: Plastic foil 4.
More informationPLE PLE CHARACTERISTICS. Travel. Travel speed. Acceleration. Temperature. Special versions APPLICATION AREAS. PLE max.
PLE PLE PLE applications 67 PLE dimensions 68 PLE types 69 PLE sizes 71 PLE parts 72 PLE assembly 73 PLE part numbers 76 PLE CHARACTERISTICS The PLE with aluminum stays is available as PLE with plastic
More information14 HH EAC/CTP CE RoHS-II conform
Outer jacket: Pressure extruded PUR mixture Inner jacket: Pressure extruded, gusset filling PUR mixture 12 cores or more: Bundles with optimized pitch length and pitch direction Conductor: Fine-wire strand
More informationROTARY TABLES SERIE TC TECHNOLOGY THAT INSPIRES
ROTARY TABLES SERIE TC TECHNOLOGY THAT INSPIRES TC FIXED-STATION ROTARY INDEXING TABLES TC ROTARY INDEXING TABLE TC ROTARY INDEXING TABLE: RELIABILITY FOR A LIFETIME EXTENDED WARRANTY Using our rotary
More informationThe right chain! High Performance from Rexnord. Rotary chains. MODULE_04/GB/2014/03 // No liability accepted for misprints or errors!
High Performance from Rexnord Rotary chains Highly robust and durable Rotary chains High Performance from Rexnord. Link cranked shape Roller Shock-resistant, seam-free Bush High surface hardness, hard
More informationSelection BASIC LINE BASIC LINEPLUS VARIO LINE SERIES TUBE
PLUS 324 System able carriers for movements PLUS For three-dimensional movements an be deployed on robots for swiveling and rotational movements: The same system for robot feet and arms With channel system,
More informationData sheet chainflex CF210.UL
For detailed overview please see design table 1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Bending-resistant braiding made of tinned copper wires. 3. Banding: Plastic
More information