spirals SPIRALS WITH swivel COUPLING: General Catalogue 253

Transcription

1 spirals SPIRALS WITH swivel COUPLING: GUARANTEED FREEDOM OF MOVEMENT General Catalogue 253

2 PUS POLYURETHANE SPIRAL HOSE FLEXIBILITY AND RESISTANCE - Torsion resistance - Shape eory - Ipact resistance - Abrasion resistance - Long life - Hydrolysis resistance - Quality: Polyether 95 A Shore - Low radius of curvature SPIC POLYAMIDE SPIRAL HOSE FLEXIBILITY AND RESISTANCE - resistance - Ipact resistance - resistance - Hydrolysis resistance - Resistance to cheical substances - Copatible with oils / hydrocarbons FIXED COUPLING Fixed coupling on supply side Technical characteristics of both couplings (fixed and rotary) - Nickel-plated brass couplings - threads - Protectors PVC pipe for protection SWIVEL COUPLING Swivel coupling on pneuatic tool side BALANCER WITH SPI SPIRAL HOSE Tool supply via polyaide spiral hose Tool suspended on conical twisted axial spring for quick extension and recall Straightforward principle, therefore highly dependable even in tough conditions Balancers can be connected to the network in three ways: - Safety adaptor and quick coupling - hose, allowing tool height adjustent - Direct attachent to the copressed air network - Coupling ounted on ball bearing for easy rotation even under pressure - No detriental stresses on the hose spirals General Catalogue 254

3 POLYURETHANE RECOILS WITH SCRATCH- RESISTANT FITTINGS Polyurethane Polyether 98 A shores Rigid fitting Scratch-resistant Max. 70 C P.N.8 bar Scratch-resistant Silicone free Mini polyurethane recoils with push-in fittings Max Rigid fitting Inlet end Recoils fitted with RPD MG CONEX push-in fittings diaeter Min. length Swivel fitting Tool end Blue 2,5 x 4 2 G 1/8 24 0,19 G 1/8 PUS 22 Blue 2,5 x 4 4 G 1/8 24 0,39 G 1/8 PUS 24 Bleu 4 x 6 2 G 1/4 32 0,23 G 1/4 PUS 42 Bleu 4 x 6 4 G 1/4 32 0,48 G 1/4 PUS 44 Polyurethane recoils with rigid and swivelling ale fittings Blue 5 x 8 2 R 1/ R 1/4 PUS 52 Blue 5 x 8 4 R 1/ R 1/4 PUS 54 Blue 5 x 8 6 R 1/ R 1/4 PUS 56 Blue 5 x 8 8 R 1/4 42 0,80 R 1/4 PUS 58 Blue 6.5 x 10 4 R 1/ R 1/4 PUS 64 Blue 6.5 x 10 6 R 1/ R 1/4 PUS 66 Blue 6.5 x 10 8 R 1/ R 1/4 PUS 68 Blue 6.5 x R 1/ R 1/4 PUS 610 Blue 8 X 12 4 R 3/ R 3/8 PUS 84 Blue 8 x 12 6 R 3/ R 3/8 PUS 86 Blue 8 x 12 8 R 3/ R 3/8 PUS 88 Blue 8 x R 3/ R 3/8 PUS 815 Blue 11 x 16 4 R 1/2 Fixed Blue 11 x 16 8 R 1/2 Fixed R 1/2 Fixed R 1/2 Fixed PUS 114 PUS 118 Polyurethane recoils with rigid and swivelling ale fittings Red 6.5 x 10 4 R 1/ R 1/4 PUS 64R Red 6.5 x 10 6 R 1/ R 1/4 PUS 66R Polyurethane recoils with rigid and swivelling ale fittings Yellow 6.5 x 10 4 R 1/ R 1/4 PUS 64J Yellow 6.5 x 10 6 R 1/ R 1/4 PUS 66J 255

4 POLYURETHANE RECOILS WITH SCRATCH- RESISTANT FITTINGS Polyurethane Polyether 98 A shores Rigid fitting Scratch-resistant Max. 70 C P.N.8 bar Scratch-resistant Silicone free Polyurethane recoils with rigid and swivelling ale fittings Max Rigid fitting Inlet end diaeter Min. length Swivel fitting Tool end Green 6.5 x 10 4 R 1/ R 1/4 PUS 64V Green 6.5 x 10 6 R 1/ R 1/4 PUS 66V Polyurethane recoils with rigid and swivelling ale fittings Black 6.5 x 10 4 R 1/ R 1/4 PUS 64NR Black 6.5 x 10 6 R 1/ R 1/4 PUS 66NR POLYURETHANE/PVC RECOILS WITH FIXED FITTINGS Polyurethane/PVC Polyether 95 A shores Rigid fitting Nickel-plated brass P.N.10 bar - 40 C to +70 C Copatible Oils, Greases, Ozones, aqueous solutions, UV Self-extinguishing Polyurethane/PVC recoils with rigid ale fittings DESCRIPTION Applications : Intense-use workshops with heavily-used work stations Welding, grinding, deburring, disc cutting shops Mould and injection press cooling circuits Ø in Long. Male thread 6,5 x 10 6 G 1/4 PUS 66CX 8 x 12 6 G 3/8 PUS 86CX 256

5 POLYURETHANE RECOILS WITH QUICK COUPLING AND PLUG Max 70 C POLYURETHANE RECOILS WITH QUICK COUPLINGS Max diaeter Min. length coupling Blue 5 x ESI 07 PUS 52ES Blue 5 x ESI 07 PUS 54ES Blue 6.5 x ESI 07 PUS 64ES Blue 8 x ESI 07 PUS 88ES Blue 6,5 x ISI 06 PUS 64IS Blue 6,5 x ISI 06 PUS 66IS Blue 8 x ISI 06 PUS 86IS POLYAMIDE RECOILS Copatible Air, water Copatible with Cheicals P.N.10 bar Max.90 C Polyaide Full-flow fitting Polyaide recoils with swivelling ale fittings Max. Both ends diaeter Min. length Blue 6 x G 1/ SPIC 62 Blue 6 x 8 5 G 1/ SPIC 65 Blue 6 x 8 10 G 1/ SPIC 610 Blue 6 x 8 20 G 1/ SPIC 620 Blue 8 x 10 2,5 G 1/ SPIC 82 Blue 8 x 10 5 G 1/ SPIC 85 Blue 8 x G 1/ SPIC 810 Blue 8 x G 1/ SPIC 820 Blue 9.5 x 12 2,5 G 3/ SPIC 102 Blue 9.5 x G 3/ SPIC 1016 Blue 9.5 x 12 4 G 3/ SPIC 104 Blue 9.5 x G 3/ SPIC 108 Polyaide recoils with rigid ale fittings Blue 6 x 8 5 Rigid G 1/ SPIC 65FX Blue 6 x 8 10 Rigid G 1/ SPIC 610FX Blue 6 x 8 20 Rigid G 1/ SPIC 620FX Blue 8 x 10 5 Rigid G 1/ SPIC 85FX Blue 8 x Rigid G 1/ SPIC 810FX Blue 8 x Rigid G 1/ SPIC 820FX 257

6 POLYAMIDE RECOILS Copatible Air, water Copatible with Cheicals P.N.10 bar Max.90 C Polyaide Full-flow fitting Polyaide recoils with tails and rigid ale fittings Max. Both ends diaeter Min. length Blue 6.5 x 8 5 Rigid G 1/ SPI 95 Polyaide recoils without fittings Blue 2.7 x SPIR 2710 Blue 4.5 x SPIR 456 Blue 4 x SPIR 4526 Blue 6 x SPIR 610 Blue 6 x SPIR 620 Blue 8 x SPIR 820 Blue 9.5 x SPIR 1016 Blue 12.7 x SPIR Blue 16 x SPIR 1630 BLOW GUN KITS PN 8 bar Airtight Sealed Ergonoic coupling blower Max. adaptor joiner Blow gun kit with alleable nozzle, spiral hose and safety quick coupling 5 x 8 ESI x 8 BSC SDA 7E 2 ERP SDA 6B 2 BRP Polyurethane ERK 3NSES Polyurethane ERK 3NSB 258

7 BLOW GUN KITS PN 8 bar Airtight Sealed Ergonoic coupling blower Max. adaptor joiner Blow gun kit with distortion nozzle 4 x 6 Distorts gradually 4 Polyurethane HELICOL 4 Blow gun kit with STL 101, spiral hose and standard quick coupling 5 x 8 IRC STL IRP Polyurethane HELICOL 8 Blow gun kit with Force 3, spiral hose and etal standard quick coupling 6.5 x 8 IRM FORCE IRP Polyurethane HELICOL 1 Blow gun kit with Force 3, spiral hose and etal standard quick coupling 5 x 8 IRM FORCE 3 2 IRP Polyurethane HELICOL 2 Blow gun kit with coupling 6.5 x 8 Fixed MTL 5 Polyaide HELICOL 3 Polyurethane blower kit 5 x 8 Fixed MTL 5 x 8 Fixed MTL 2 Polyurethane HELICOL 6 4 Polyurethane HELICOL 7 259

8 FITTINGS FOR POLYURETHANE RECOILS Scratch resistant Protects recoils ball bearings Protective PVC sheath Rigid fitting Nickel-plated fitting Full-flow fitting int.ext Thread ale Rigid fitting swivel fitting for polyurethane recoils fixed fitting for polyurethane recoils 5 x 8 R 1/4 Swivelling PUR 813R 6.5 x 10 R 1/4 Swivelling PUR 1013R 8 x 12 R 3/8 Swivelling PUR 1238R 5 x 8 R 1/4 Fixed PUR 813F 6.5 x 10 R 1/4 Fixed PUR 1013F 8 x 12 R 3/8 Fixed PUR 1238F 11 x 16 G 1/2 Fixed PUR 1121F FITTINGS FOR POLYAMIDE RECOILS Nickel plated brass Spring guard Full-flow fitting Thread BSP Gas Rigid fitting for polyaide recoils Fixed fitting for polyaide recoils 4 x 6 G 1/4 ale Swivel 20 6 x 8 G 1/4 ale Swivel 22 8 x 10 G 1/4 ale Swivel 25 8 x 10 G 3/8 ale Swivel 25M38 10 x 12 G 3/8 ale Swivel x 12 G 3/8 feale Swivel 27F38 4 x 6 G 1/4 ale Fixed 20FX 6 x 8 G 1/4 ale Fixed 22FX 8 x 10 G 1/4 ale Fixed 25FX 10 x 12 G 3/8 ale Fixed 27FX 12.7 x 16 G 1/2 ale Fixed 29FX 16 x 20 G 3/4 ale Fixed 30FX SPIRALEX TOOL BALANCERS WITH RECOILS Less strain Cost-effective Siple solution Built to last Fluid Air Autootive applications Industrial application Weight tool weight kg Outlet BSP Gas Hose diaeter Max length in Mini in Spiralex tool balancers with recoils 0,2 to 0,5 G 1/4 ale 4.5 x ,28 to 0,45 SPI to 2 G 1/4 feale 6.3 x to 0.90 SPI to 5 G 3/8 Feale 9.5 x to 1.42 SPI 5 6 to 10 G 3/8 feale 9.5 x to 0.98 SPI 7 260