Sewer cleaning & sewer cleaning nozzles 08

Size: px

Start display at page:

Download "Sewer cleaning & sewer cleaning nozzles 08"

Sabrina Phebe Mitchell
5 years ago
Views:

Sewer cleaning & sewer cleaning nozzles 08 Coupling-system ST-245 175 Drain jet extension 178 Driver for rotating nozzles 179 High pressure hoses with smooth cover - 500 bar 170 Jetter Valves 178

1 Sewer cleaning & sewer cleaning nozzles 08 Coupling-system ST Drain jet extension 178 Driver for rotating nozzles 179 High pressure hoses with smooth cover bar 170 Jetter Valves 178 Mini-nozzles for sewer cleaning 175 Mini-sewer cleaning hose with nozzle 170 Nozzle Inserts 179 Rotating nozzle adaptor 177 Sewer cleaning hose assemblies 168 Sewer cleaning nozzles 180 Small plough jet nozzle 177 ST-49 ball type nozzle 176 ST-49 milling type nozzles 176 ST-49 nozzles for sewer cleaning 174 ST-71 hose reel with sewer cleaning hose 171 mini rotating nozzles for sewer cleaning ST nozzles for sewer cleaning ST , rotating nozzles for sewer cleaning ST Tip cleaner

08 Sewer cleaning & sewer cleaning nozzles Sewer cleaning hose assemblies without nozzle QSC : male thread + O-ring Plug : male thread + O-ring M22 : 1/8" M22 : 1/4" M21 : 1/8" KW : 1/8" KW : 1/4" KW

2 08 Sewer cleaning & sewer cleaning nozzles Sewer cleaning hose assemblies without nozzle QSC : male thread + O-ring Plug : male thread + O-ring M22 : 1/8" M22 : 1/4" M21 : 1/8" KW : 1/8" KW : 1/4" KW : 1/8" K : 1/8" K : 1/8" Hoses with single wire braid and smooth cover Flexy bar 100 C 10 m m m m m Plastic hoses with single fabric braid K Polya bar 20 C 10 m m m m m Polya bar 20 C 10 m m m m m M : M + O-ring K W A A A K K without nozzle M thread + O-rings M22 : 1/8" M22 : 1/4" 1/8" : 1/8" 1/4" : 1/4" As required our sewer cleaning hoses have a safety clearance marking directly on the hose which is placed 0.5 m of the nozzle. Hoses with single wire braid and smooth cover Flexy bar 100 C 10 m m m m m Plastic hoses with single fabric braid Polya bar 20 C 10 m m m m m Polya bar 20 C 10 m m m m m

Sewer cleaning & sewer cleaning nozzles 08 Sewer cleaning hose assemblies with nozzle Quick screw couplings Plug M22 : 1/8" M21 : 1/8" KW : 1/8" KW : 1/8" K : 1/8" Male thread M22 : 1/8" Hoses with

3 Sewer cleaning & sewer cleaning nozzles 08 Sewer cleaning hose assemblies with nozzle Quick screw couplings Plug M22 : 1/8" M21 : 1/8" KW : 1/8" KW : 1/8" K : 1/8" Male thread M22 : 1/8" Hoses with single wire braid and smooth cover Flexy bar 100 C 10 m m m m m Plastic hoses with single fabric braid K W A A K K Kr Polya bar 20 C 8 m m m m m m m Polya bar 20 C 10 m m m m m QSC : male thread + O-ring without nozzle M : M + Plug KW : O-rings M thread + O-ring M : M + O-ring with nozzle Plug KW rotating nozzle M22 : 1/8" M21 : 1/8" 1K/W8":: 1//8"" KW : 1/8" M22 : 1/8" KW : 1/8" K W A A A Plastic hoses with single wire braid bar 99 C 10 m m m m m Symbols nominal diameter pressure temperature length type temperature 169

08 Sewer cleaning & sewer cleaning nozzles with nozzle Male thread Sewer cleaning hose assemblies M22 : 1/8" without nozzle M thread + O-ring M thread + O-ring 1/8" : 1/8" with nozzle QSC M22 : 1/8"

010 412 040 010 15 m 412 012 015 412 010 015 412 040 015 Flexy 6 300 bar 100 C 10 m 420 302 321 0 420 300 321 0 20 m 412 012 020 412 010 020 412 040 020 15 m 420 302 321 5 420 300 321 5 25 m 412 012

300 323 0 High pressure hoses with smooth cover - 500 bar Kr without nozzle Fittings stainless steel QSC : Male thread Kr M22 : 1/8" M22 : 1/4" M thread : M thread 1/4" : 1/4" Hoses with double wire

4 08 Sewer cleaning & sewer cleaning nozzles with nozzle Male thread Sewer cleaning hose assemblies M22 : 1/8" without nozzle M thread + O-ring M thread + O-ring 1/8" : 1/8" with nozzle QSC M22 : 1/8" no nozzle QSC : m + O-ring Plastic hoses with single fabric braid Polya bar 20 C 8 m Hoses with single wire braid and smooth cover 10 m m Flexy bar 100 C 10 m m m m m m m m m High pressure hoses with smooth cover bar Kr without nozzle Fittings stainless steel QSC : Male thread Kr M22 : 1/8" M22 : 1/4" M thread : M thread 1/4" : 1/4" Hoses with double wire braid and smooth cover Flexy bar 150 C 10 m m m bar 60 C 0.5 m bar 60 C 2.0 m bar 60 C 5.0 m bar 60 C 8.0 m bar 60 C 10.0 m bar 60 C 15.5 m bar 60 C 20.0 m bar 60 C 25.0 m Sewer cleaning hose assemblies with mini-nozzle Heat exchangers in thermal power stations or conveyor pipes in the food industry are often sewers of 10 to 12 mm in diameter. In order to clean them effectively from the inside a device for sewer cleaning with small diameters and high pressures is required. We have also in this case the best possible solution for you! "small" as desired and "powerful" with great performance. We are talking about the new mini-device for sewer cleaning. Being only 9 mm in diameter the nozzle withstands the working pressure of up to 500 bar. Completely sensational or what do you think? The nozzle for sewer cleaning is made out of stainless steel and equipped with three jet outlets to the back and one forward. The mini-nozzle for sewer cleaning is supplied with a black plastic hose with a nominal diameter of 2 and assembled with 1/8" M. The device is so suitable for all common high pressure cleaner. 170

Sewer cleaning & sewer cleaning nozzles 08 ST-71 hose reel with sewer cleaning hose The ST-71 hose reel is equipped with a 15 m Flexy sewer cleaning hose DN 6.

5 Sewer cleaning & sewer cleaning nozzles 08 ST-71 hose reel with sewer cleaning hose The ST-71 hose reel is equipped with a 15 m Flexy sewer cleaning hose DN 6. The frame of the reel is made out of stainless steel and the reel is made out of plastic. The space-saving and orderly solution can either be hung up at the wall or refitted in high pressure cleaner. The hose can be used as extension of high pressure hoses or as sewer cleaning hose. Max. 300 bar / 100 C /4" M M22 M /8" M M22 M M22 F M22 M plug 8.8 M22 M Protective clothing is shown on the pages Symbols nozzle nominal diameter pressure temperature length type outlet inlet diameter 171

08 Sewer cleaning & sewer cleaning nozzles Nozzles without centric hole nozzles for sewer cleaning ST-49 With 3 or 4 rear jets

Stainless steel 1/4" F. 19 mm. Stainless steel 3/8" F. 24 mm.

10 651 40 651 48 651 84 Nozzles with centric hole Cleaning of clogged pipes. With centric front jet and 3 or 4 rear jets (30 ).

6 08 Sewer cleaning & sewer cleaning nozzles Nozzles without centric hole nozzles for sewer cleaning ST-49 With 3 or 4 rear jets (30 ) for maximum thrust and simultaneously, a flushing away of the waste material. Stainless steel. 1/8" F. 15 mm. Stainless steel 1/4" F. 19 mm. Stainless steel 3/8" F. 24 mm. Stainless steel Nozzles with centric hole Cleaning of clogged pipes. With centric front jet and 3 or 4 rear jets (30 ). Front jet for penetrating of completely clogged pipes and frozen pipelines, rear jets for flushing away of the waste material. Stainless steel. 1/8" F. 15 mm. Stainless steel 1/4" F. 19 mm. Stainless steel 3/8" F. 24 mm. Stainless steel

Sewer cleaning & sewer cleaning nozzles 08 rotating nozzles for sewer cleaning ST-49.

049 795 200 049 800 200 049 805 200 049 810 200 049 815 200 049 820 651 61 * 651 62 ** 200

200 049 895 10 12 15 18 ST-49.1 with centric hole 3/8"F.

cleaning ST-49.3 1/8 F. Nozzle with thrust. 12 mm.

2 rotating rear jets (45 ) for forward thrust and flushing away of the waste material.

7 Sewer cleaning & sewer cleaning nozzles 08 rotating nozzles for sewer cleaning ST-49.1 Rotating nozzles ST-49.1 without centric hole /8" F. 19 mm 1/4" F. 19 mm 3/8" F. 24 mm * ** ST-49.1 with centric hole 3/8"F. 24 mm mini rotating nozzles for sewer cleaning ST /8 F. Nozzle with thrust. 12 mm. Ideal for cleaning or flushing out pipes as well as adjoining lateral pipes at any angle. Small pump capacities required, only. 2 rotating radial jets (90 ) to the pipe wall for best cleaning results. 2 rotating rear jets (45 ) for forward thrust and flushing away of the waste material. Suitable for pipes from mm. Hardened stainless steel. Max. 500 bar Applications:» Cleaning of deposits» Cleaning of grease, fat and organic deposits» To clean heat exchangers * No traction. Additionaly lateral hole ** Cleaning of clogged pipes. Additionaly lateral and centric hole Symbols nozzle diameter 173

08 Sewer cleaning & sewer cleaning nozzles Sewer cleaning nozzles with male thread ST-49 nozzles for sewer cleaning Due to its conical front design this is the ideal solution to make its way through

210 bar / 16 l/min Due to its conical front design this is the ideal solution to make its way through tight bends and traps. 3 rear jets for maximum thrust and high cleaning impact.

350 bar / 17 l/min Due to its conical front design this is the ideal solution to make its way through tight bends and traps. 8 rear jets for maximum thrust and best wall coverage.

Outside 15 mm. Stainless steel. Max. 350 bar / 25 l/min 121 000 360 1/4" M 035 121 160 360 1/4" M 040 123 160 860 3/8" M 060 Compact and heavy construction with 3 rear jets.

500 bar / 40 l/min 120 000 312 1/2" M 080 Sewer cleaning nozzles with female thread Drain cleaning nozzle suitable for use on most van and trailer mounted cleaning machines.

500 bar / 45 l/min 120 110 410 1/2" M 090 Due to its very compact design this is the ideal solution for tight elbows. 6 rear jets for maximum thrust and best wall coverage. Outside 22 mm.

Front jet to blast through roots and scale or de-icing. Outside 15 mm. Hardened stainless steel. Max.

8 08 Sewer cleaning & sewer cleaning nozzles Sewer cleaning nozzles with male thread ST-49 nozzles for sewer cleaning Due to its conical front design this is the ideal solution to make its way through tight bends and traps. Ideal for hobby and semi-professional use. 3 rear jets for maximum thrust. Nozzle drillings as stepped bore for protection against mechanical impact. Outside 15 mm. Brass. Max. 210 bar / 16 l/min Due to its conical front design this is the ideal solution to make its way through tight bends and traps. 3 rear jets for maximum thrust and high cleaning impact. Front jet to blast through roots and scale or de-icing. Nozzle drillings as stepped bore for best protection against mechanical impact. Outside 15 mm. Stainless steel. Max. 350 bar / 17 l/min Due to its conical front design this is the ideal solution to make its way through tight bends and traps. 8 rear jets for maximum thrust and best wall coverage. Front jet to blast through roots and scale or de-icing. Nozzle drillings as stepped bore for best protection against mechanical impact. 3 rear jets for maximum thrust and best wall coverage. Outside 15 mm. Stainless steel. Max. 350 bar / 25 l/min /4" M /4" M /8" M 060 Compact and heavy construction with 3 rear jets. For standard cleaning and desilting applications. Outside 25 mm. Stainless steel. Max. 500 bar / 40 l/min /2" M 080 Sewer cleaning nozzles with female thread Drain cleaning nozzle suitable for use on most van and trailer mounted cleaning machines. 4 rear jets (30 ) for higher thrust. Conical head for tight bends and offsets. Outside 24.2 mm. Stainless steel. Max. 500 bar / 45 l/min /2" M 090 Due to its very compact design this is the ideal solution for tight elbows. 6 rear jets for maximum thrust and best wall coverage. Outside 22 mm. Hardened stainless steel. Max. 500 bar / 30 l/min Due to its very compact design this is the ideal solution for tight elbows. 3 rear jets for maximum thrust and powerful cleaning impact. Front jet to blast through roots and scale or de-icing. Outside 15 mm. Hardened stainless steel. Max. 500 bar / 17 l/min Due to its conical front design this is the ideal solution to make its way through tight bends and traps. 3 rear jets for maximum thrust and powerful cleaning impact. Front jet to blast through roots and scale or de-icing. Outside 22 mm. Hardened stainless steel. Max. 500 bar / 25 l/min Due to its very compact design this is the ideal solution for tight elbows. 3 rear jets for maximum thrust and powerful cleaning impact. Front jet to blast through roots and scale or de-icing. Outside 22 mm. Hardened stainless steel. Max. 500 bar / 30 l/min /4" F /8" F /4" F /4" F

Sewer cleaning & sewer cleaning nozzles 08 Grease ball ST-49 nozzles for sewer cleaning Root rat 8 rear jets 0.6 mm for extreme thrust and highest wall coverage of the pipe.

Nozzle drilling as stepped bore for best protection against mechanical impact. Hardened stainless steel. Max.

proven to be ideal on root chokes. Hardened stainless steel. Max.

In order to clean them effectively from the inside a device for sewer cleaning with small diameters and high pressures is required. Mini-nozzles for sewer cleaning Being only 9.

9 Sewer cleaning & sewer cleaning nozzles 08 Grease ball ST-49 nozzles for sewer cleaning Root rat 8 rear jets 0.6 mm for extreme thrust and highest wall coverage of the pipe. Designed for the ability to clean grease off the sidewall of pipes but has proven to be great on root chokes, too. Completely spherical shape. Nozzle drilling as stepped bore for best protection against mechanical impact. Hardened stainless steel. Max. 500 bar /4" F 080 Equipped with 3 rear jets (30 ) for maximum thrust and 3 additional nozzles (45 ) right behind its nose for better cleaning results and wall coverage the nozzle has proven to be ideal on root chokes. Hardened stainless steel. Max. 500 bar / 30 l/min /4" F 060 Heat exchangers in thermal power stations or conveyor pipes in the food industry are often sewers of 10 to 12 mm in diameter. In order to clean them effectively from the inside a device for sewer cleaning with small diameters and high pressures is required. Mini-nozzles for sewer cleaning Being only 9.8 mm in diameter the nozzle withstands the working pressure of up to 500 bar. Together with our 1 / Bronze hose (30420) the complete sewer cleaning unit will be rated up to 300 bar and 100 C Crimp nipple. DN 4. M7 M. Stainless steel. Max. 500 bar Nipple ST-245 M7 F. 3 rear jets for maximum thrust and powerful cleaning impact. Outside 9.8 mm. Stainless steel. Max. 500 bar Coupling-system ST-245 M7 F. 3 rear jets for maximum thrust. Additional 3 side jets (90 ) for powerful cleaning impact and optimal wall coverage. Outside 9.8 mm. Stainless steel. Max. 500 bar ST-245 Coupling / wear cone ST-245 For /4" F /4" M. Stainless steel. Max. 350 bar /4" M. Stainless steel. Max. 350 bar /4" M. Stainless steel. Max. 350 bar. For wear cone Suitable for all 1/4" F nozzles for sewer cleaning Symbols nozzle diameter length inlet outlet 175

08 Sewer cleaning & sewer cleaning nozzles ST-49 Ball type nozzle Made out of wear-resistant, hardened stainless steel provided with front jet insert or blind plug (interchangeable).

Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer. Max.

6 rear jets 4 rear jets 6 rear jets 6 rear jets 6 rear jets 649 030 216 060 060 649 030 216 080 080 649 030 216 100 100 649 030 216 120 120 649 030 216 150 150 649 030 216 200 200 649 030 314 060 060

649 030 316 200 200 649 030 416 060 060 649 030 416 080 080 649 030 416 100 100 649 030 416 120 120 649 030 416 150 150 649 030 416 200 200 649 040 416 060 060 649 040 416 080 080 649 040 416 100 100

tear through almost any kind of blockage. The sharp edges cut, break and penetrate through every kind of blockage. Made out of wear-resistant, hardened stainless steel.

Due to this feature the efficiency is considerably higher compared to those nozzles with drilled holes and the service life is several times longer. Max.

10 08 Sewer cleaning & sewer cleaning nozzles ST-49 Ball type nozzle Made out of wear-resistant, hardened stainless steel provided with front jet insert or blind plug (interchangeable). Angle of jet is 30, sturdy wall thickness, long service life and a minimum of wear and tear. All nozzles are provided with hardened stainless steel inserts. Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer. Max. 500 bar Applications:» Suitable for removal of sludge deposits» Desilting of pipes» Opening of frozen pipelines 1/4" F. 3/8" F. 3/8" F. 1/2" F. 1/2" M. MR cone. Outside 25 mm. Outside 30 mm. Outside 30 mm. Outside 30 mm. Outside 30 mm. 6 rear jets 4 rear jets 6 rear jets 6 rear jets 6 rear jets Milling Type Nozzles ST-49 With its 3 to 4 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage. The sharp edges cut, break and penetrate through every kind of blockage. Made out of wear-resistant, hardened stainless steel. All nozzles are equipped with replaceable hardened stainless steel rear and centric front jets. Due to this feature the efficiency is considerably higher compared to those nozzles with drilled holes and the service life is several times longer. Max. 350 bar Applications:» Penetration of completely clogged pipes» Opening of root masses» Opening of frozen pipelines» Hydraulic thrust boring flushing operations 1/4" F. For tubes > 30 mm. Lateral front jets 0.5 mm drilled. Front Rear /8" F. For tubes > 50 mm. Lateral front jets with hardened stainless steel nozzle inserts. Front Rear /2" F. For tubes > 60 mm Lateral front jets with hardened stainless steel nozzle inserts. Front Rear Symbols nozzle diameter outlet inlet 176

Sewer cleaning & sewer cleaning nozzles 08 Small plough jet nozzle For 2 fan jets 1/4" M NPT For 2 ST-357

deposits collect and blasts them back towards the manhole. Width approx. 72 mm. Weight 1.5 kg. Max.

Select nozzle size according to pressure and flow rate of the machine.

nozzle is the ideal solution for deposits collect and blasts them back towards the manhole. Width approx.

Select rotor nozzle size symmetric according to pressure and flow rate of the machine.

Rotating nozzle adaptor Designed for connecting the ST-357 rotating nozzle to a sewer cleaning hose.

11 Sewer cleaning & sewer cleaning nozzles 08 Small plough jet nozzle For 2 fan jets 1/4" M NPT For 2 ST-357 rotating nozzles 45 < Fitted with two rear facing fan jets the small plough jet nozzle is great for desilting drains and sewers. The heavy forged brass construction keeps the jet firmly planted in the base of the pipe where the silt deposits collect and blasts them back towards the manhole. Width approx. 72 mm. Weight 1.5 kg. Max. 420 bar / 150 C / 80 l/min. 1/4"-nozzles need to be assembled under 45 to achieve best cleaning results. Select nozzle size according to pressure and flow rate of the machine /2" F 2 x 1/4" F NPT Fitted with two rear facing ST-357 rotating nozzles the small plough jet nozzle is the ideal solution for desilting drains and sewers. The heavy forged brass construction keeps the jet firmly planted in the base of the pipe where the silt deposits collect and blasts them back towards the manhole. Width approx. 88 mm. Weight 2.5 kg. Max. 350 bar / 90 C / 80 l/min. Select rotor nozzle size symmetric according to pressure and flow rate of the machine /8" F 2 x 1/4" M Our rotating nozzles are on page 253. Rotating nozzle adaptor Designed for connecting the ST-357 rotating nozzle to a sewer cleaning hose. Hardened stainless steel body with extra sharp edges. Max. 400 bar For ST-357 rotating nozzle Possible jet configurations cleaning efficiency jet configuration thrust desilting side front /4" F 1/4" M 177

08 Sewer cleaning & sewer cleaning nozzles Jetter Valves Jetter valves are special valve assemblies which allow to shut off one particular

Due to this the pump starts pulsating which causes significant vibrations at the nozzle and an increased cleaning effect at a reduced flow

Jetter valves create vibrations to help the hose sliding around tight bends in small lines.

Pulsation can be started or stopped by a lever or hand wheel at the jetter valve.

12 08 Sewer cleaning & sewer cleaning nozzles Jetter Valves Jetter valves are special valve assemblies which allow to shut off one particular intake valve. The jetter valve cuts off the flow of one of the three pistons of the jetter pump. Due to this the pump starts pulsating which causes significant vibrations at the nozzle and an increased cleaning effect at a reduced flow rate (approx. -1/3 of the full flow rate of the pump). Jetter valves create vibrations to help the hose sliding around tight bends in small lines. Jetter valves should not be combined with pulsation dampers in one jetter unit. Pulsation can be started or stopped by a lever or hand wheel at the jetter valve. Tip cleaner XT, XM RK XW High speed steel (HSS) with aluminium shaft. 42 mm Lance with female thread 1/4" M : 1/4" F BSP. Drain jet extension for cleaning pipes and shafts of large diameter to prevent reversal in direction of travel. Max. 400 bar Drain jet extension Functional principle mm stainless steel Symbols outlet inlet diameter type length material 178

Sewer cleaning & sewer cleaning nozzles 08 Rotor nozzle driver and rotor nozzles are the perfect combination for drilling through blockages with its rotary forward facing jet.

cutting force to blast through roots and scale. It is also ideal for cutting up and shredding tissue and fat deposits. For ST-357/ST-456 rotating nozzles. Hardenened stainless steel. Max. 350 bar.

1/4" M and 6 M5 threads for nozzle inserts (see table below). 040 075 210 3/8" F 040 075 215 1/2" F Nozzle inserts for sewer cleaning nozzles and nozzle driver have to be installed symmetrically.

13 Sewer cleaning & sewer cleaning nozzles 08 Rotor nozzle driver and rotor nozzles are the perfect combination for drilling through blockages with its rotary forward facing jet. Driven up to the blockage by 6 powerful rear facing hardened stainless steel nozzles the high speed forward facing spinning jet creates a cone shape that has Driver for rotating nozzles enough cutting force to blast through roots and scale. It is also ideal for cutting up and shredding tissue and fat deposits. For ST-357/ST-456 rotating nozzles. Hardenened stainless steel. Max. 350 bar. 1/4" M and 6 M5 threads for nozzle inserts (see table below) /4" F /8" F For ST-458/ST-559 rotating nozzles. Hardenened stainless steel. Max. 500 bar. 1/4" M and 6 M5 threads for nozzle inserts (see table below) /8" F /2" F Nozzle inserts for sewer cleaning nozzles and nozzle driver have to be installed symmetrically. Full jet. 500 bar. Hex for allen key 2.5 mm. Hardened stainless steel Nozzle configuration different nozzle sizes Nozzle Inserts plug hole- nozzle size M5 plug M5 0.5 mm M5 0.6 mm M5 0.7 mm M5 0.8 mm M5 0.9 mm M5 1.0 mm M5 1.2 mm M5 1.5 mm M5 2.0 mm 0885 Our rotating nozzles are on page

08 Sewer cleaning & sewer cleaning nozzles Sewer cleaning nozzles Rotating nozzles RT. 1000 bar Rotating nozzles RH. 1000 bar RT 100 50 12 35 g RH 100 63 12 42 g Stainless steel.

3-4 weeks side jet front jet 652 710 006 RT 100 6 l/100 bar 1/8" F 2 2 652 710 010 RT 100 12l/100 bar 1/8" F 2 2 652 710 014 RT 100 14 l/100 bar 1/8" F 2 2 Sewer nozzles BV. 250 bar * Stainless steel.

14 08 Sewer cleaning & sewer cleaning nozzles Sewer cleaning nozzles Rotating nozzles RT bar Rotating nozzles RH bar RT g RH g Stainless steel. Rotating body hp-bronze. Compact model, universally applicable. Extreme cleaning performance, removes hard deposits. Pressure max bar. Delivery time of approx. 3-4 weeks side jet front jet RT l/100 bar 1/8" F RT l/100 bar 1/8" F RT l/100 bar 1/8" F 2 2 Sewer nozzles BV. 250 bar * Stainless steel. Rotating body hp-bronze. Compact model, universally applicable. Extreme cleaning performance, removes hard deposits. Pressure max bar. Delivery time of approx. 3-4 weeks side jet RH l/100 bar 1/8" F RH l/100 bar 1/8" F RH l/100 bar 1/8" F 2 Sewer nozzles BA. 250 bar * BV kg BV kg BV kg Stainless steel. With exchangeable inserts. Extreme pulling and cleaning power. Pressure max. 250 bar. Applications: Removal of deposits and blockages, sewer cleaning. Delivery time of approx. 3-4 weeks * rear jet front jet BV /2" F 6 (M6) from 6 cm BV 406-Z /2" F 6 (M6) 1 (M6) from 6 cm BV /4" F 4+4 (M8) from 10 cm BV 508-Z /4" F 4+4 (M8) 1 (M8) from 10 cm BV " F 4+4 (M10) from 15 cm BV 608-Z " F 4+4 (M10) 1 (M10) from 15 cm BA kg BA kg BA kg Hardened steel. With exchangeable inserts. Extreme pulling and cleaning power. Pressure max. 250 bar. Applications: all around cleaning of dirty or blocked sewers. Delivery time of approx. 3-4 weeks * rear jet front jet BA /2" F 6 (M6) from 10 cm BA 406-Z /2" F 6 (M6) 1 (M6) from 10 cm BA /4" F 6 (M8) from 15 cm BA 506-Z /4" F 6 (M8) 1 (M8) from 15 cm BA " F 6 (M10) from 20 cm BA 606-Z " F 6 (M10) 1 (M10) from 20 cm * When placing an order, please state flow rate + pressure! 180

Sewer cleaning & sewer cleaning nozzles 08 Milling type FR. 250 bar * Sewer cleaning nozzles Cone shape nozzles LK. 500 bar * FR 506 71 38 0.35 kg FR 606 95 50 0.90 kg FR 609 120 60 1.

3-4 weeks * rear jet front jet 652 300 04 FR 506 90-180 3/4" F 6 4 (M4) from 8 cm 652 300 05 FR 606 200-360 1" F 6 4 (M6) from 12 cm 652 300 06 FR 609 200-360 1" F 9 4 (M6) from 20 cm * When placing

15 Sewer cleaning & sewer cleaning nozzles 08 Milling type FR. 250 bar * Sewer cleaning nozzles Cone shape nozzles LK. 500 bar * FR kg FR kg FR kg Stainless steel. 3 sharp cutting edges provide excellent milling effect. 3 or 4 jets to front. Pressure max. 250 bar. Applications: completely blocked pipes. Delivery time of approx. 3-4 weeks * rear jet front jet FR /4" F 6 4 (M4) from 8 cm FR " F 6 4 (M6) from 12 cm FR " F 9 4 (M6) from 20 cm * When placing an order, please state flow rate + pressure! LK g LK g LK g LK g Stainless steel. Extremely high impact force. Long reach. Pressure max. 500 bar. Applications: cleaning of shafts. Delivery time of approx. 3-4 weeks orifice LK mm 1/4" M LK mm 1/2" M LK mm 3/4" M LK mm 1" M Rotating nozzles RD. 250 bar Nozzle inserts solid stream VS. 500 bar RD kg RD kg RD kg RD kg Stainless steel. Brazen rotating body. Excellent cleaning by rotating jets. Exchangeable inserts included. Excellent pulling power by return beams specially placed. Pressure max. 250 bar. Delivery time of approx. 3-4 weeks * rear jet front jet RD /4" F 4 3 from 40 mm RD /2" F 5 3 from 70 mm RD /4" F 6 3 from 100 mm RD " F 8 3 from 120 mm Stainless steel. Pressure max. 500 bar VS VS VS VS orifice VS mm M VS mm M VS mm M VS mm M10 Symbols type thread lance flow weight diameter height 181

08 Sewer cleaning & sewer cleaning nozzles Sewer cleaning hose assemblies sewerclean365+ PU-sewer cleaning hose» cut- and abrasion-resistant» extremely long operating

extremely abrasion-resistant, ageing resistant and weather-resistant surface 12 275 bar 12.7 mm 23.

16 08 Sewer cleaning & sewer cleaning nozzles Sewer cleaning hose assemblies sewerclean365+ PU-sewer cleaning hose» cut- and abrasion-resistant» extremely long operating life» highly tearproof by two-fold braid of aramid fibres and polyurethane surface» good swimming features» ageing resistant and weather-resistant surface» -40 C C, -40 F F DKR : M 1/2" : 1/2" All hoses are supplied together with a test certificate according to EN sewerstar365+ Gummi-Kanalspülschläuche» highly abrasion-resistant with an extremely long operating life» high flexibility by especially developed rubber compound» extremely abrasion-resistant, ageing resistant and weather-resistant surface bar 12.7 mm 23.4 mm 840 bar 40 m 60 m 80 m 100 m 120 m» easy handling by low weight» excellent pressure resistance and tensile strength» very low bending radius» wire braid for high stability» interior and surface are made out of NR/SBR» -40 C C, -40 F +302 F DKR : M /2" : 1/2" 3/8" : 3/8" 3/8" : 1/4" bar 7.9 mm 15.0 mm 1260 bar 40 m 80 m bar 9.8 mm 16.9 mm 740 bar 40 m 60 m 80 m 100 m 120 m bar 12.7 mm 22.6 mm 640 bar 40 m 60 m 80 m 100 m 120 m Symbols nominal diameter internal diameter diameter pressure burst pressure bending radius weight temperature 182

Everything for municipal cleaning applications

Everything for municipal cleaning applications 10kommunal365+ Everything for municipal cleaning applications kommunal365+ Professional gun. Max. 150 bar / 80 l/min / 150 C 202 320 500 1/4" F 1/2" F Grips