Product End-of-Life Disassembly Instructions Product Category: Personal Computers

Transcription

1 Product End-of-Life Disassembly Instructions Product Category: Personal Computers Marketing Name / Model [List multiple models if applicable.] HP t51 Thin Client Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 22/96/EC, Waste Electrical and Electronic Equipment (WEEE). 1. Items Requiring Selective Treatment 1.1 Items listed below are classified as requiring selective treatment. 1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable. Quantity of items Item Description Notes included in product Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA) Batteries Mercury-containing components Liquid Crystal Displays (LCD) with a surface greater than 1 sq cm With a surface greater than 1 sq cm PCA All types including standard alkaline and lithium coin or button style batteries RTC batteryn/a For example, mercury in lamps, display backlights, scanner lamps, switches, batteries N/A Includes background illuminated displays with gas discharge lamps N/A Cathode Ray Tubes (CRT) Capacitors / condensers (Containing PCB/PCT) Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height External electrical cables and cords Power cable/ Antenna cable 2 Gas Discharge Lamps Plastics containing Brominated Flame Retardants weighing > 25 grams (not including PCBs or PCAs already listed as a separate item above) Components and parts containing toner and ink, including liquids, semi-liquids (gel/paste) and toner Include the cartridges, print heads, tubes, vent chambers, and service stations. N/A Components and waste containing asbestos Components, parts and materials containing refractory ceramic fibers EL-MF877- Page 1 1 1

2 Components, parts and materials containing radioactive substances 2. Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Description #1 Philips screw drivers (For disassemble 1 pcs screws on Top cover ) Tool Size (if applicable) 2# kgf.cm Description #2 Philips screw drivers (For disassemble 4 pcs screws on Metal top cover (L / R) 2# kgf.cm Description #3 Philips screw driver ( For disassembel 6 pcs screws on the Heat sink module ) 2# kgf.cm Description #4 Philips screw driver ( For disassembel 5 pcs screws on the MB ) Description #5 Philips screw driver ( For disassembel 8 pcs screws on the Rear I/O connector ) 2# kgf.cm Hexagonal screwdriver 5m/m 3.kgf.cm 3. Product Disassembly Process 3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment: 1. Remove 1pcs Top cover screw. Pls refer to figure 1 2. Disassemble Top cover. Pls refer to figure 2 3. Disassemble Right side cover. Pls refer to figure 3~4 4. Remove 4pcs Metal Top cover screw. Pls refer to figure 5 5. Disassemble Metal Top cover. Pls refer to figure 6 6. Remove 6pcs screws for Heat sink module and Heat sink. Pls refer to figure 7~8 7. Remove PATA Card SATA Card SO-DIMM and WLAN CARD. Pls refer to figure 9~1 8. Remove 8pcs Rear IO cover Hexagonal screw. Pls refer to figure 11~12 9. Remove 5pcs MB screw.pls refer to figure 13~14 1. Disassemble Assembly Rear IO cover. Pls refer to figure 15~ Remove Main board. Pls refer to figure Disassemble Left side cover. Pls refer to figure 18~ Remove AL PLATE and 4pcs screws. Pls refer to figure 2~ Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations). EL-MF877- Page 2

3 Figure1. Figure 2. Figure3. Figure 4. Figure 5. Figure 6. Figure 7. Figure 8. Figure 9. Figure1. EL-MF877- Page 3

4 Figure11. Figure12. Figure13. Figure14. Figure15. Figure16. Figure17. Figure18. Figure19. Figure2. EL-MF877- Page 4

5 Figure21. Figure22. EL-MF877- Page 5