Bluedy Lighting Technology Co.,Ltd. LED T8 tube

Transcription

1 Bluedy Lighting Technology Co.,Ltd LED T8 tube Ⅰ Main feature: Base material: aluminum alloy design, guarantee high heat dissipation. Compatible with starter and ballast, no need to disassemble, eight ways for wire connection Compatible No dark area, No glare, Soft light. Good consistency; Power supply of efficiency, low consumption, steady, unique design of anti-lighting, over-currents, over-voltages, short-circuits and overloads protection; v wide voltage design, simple voltage input model; No lead, mercury and other harmful substances, no noise, no radiation, no ultraviolet ray, environmental protection and energy saving; Lifespan is more than hours, 30 times than incandescent lamp's, 6 times than fluorescent lamp's; Pass many strict inspections, quality guaranteed

2 Ⅱ T8 Parameter: 600MM Item No. Color Power Voltage LED Qty Color Temp Luminous Flux BLT-T8-LDT120V8 Day white 9±1W AC V 120 pcs K 900±10%LM BLT-T8-LNT120V8 Nature white 9±1W AC V 120 pcs K 850±10%LM BLT-T8-LWT120V8 Warm white 9±1W AC V 120 pcs K 800±10%LM 1200MM Item No. Color Power Voltage LED Qty Color Temp Luminous Flux BLT-T8-LDT240V16 Day white 15±1W AC V 216 pcs K 1400±10%LM BLT-T8-LNT240V16 Nature white 15±1W AC V 216 pcs K 1300±10%LM BLT-T8-LWT240V16 Warm white 15±1W AC V 216 pcs K 1250±10%LM BLT-T8-LDT288V18 Day white 18±1W AC V 240 pcs K 1600±10%LM BLT-T8-LNT288V18 Nature white 18±1W AC V 240 pcs K 1500±10%LM BLT-T8-LWT288V18 Warm white 18±1W AC V 240 pcs K 1450±10%LM BLT-T8-LDT216V35 Day white 20±1W AC V 264 pcs K 1800±10%LM BLT-T8-LNT216V35 Nature white 20±1W AC V 264 pcs K 1700±10%LM BLT-T8-LWT216V35 Warm white 20±1W AC V 264 pcs K 1650±10%LM 1500MM Item No. Color Power Voltage LED Qty Color Temp Luminous Flux BLT-T8-LDT288V18 Day white 18±1W AC V 312 pcs K 2000±10%LM BLT-T8-LNT288V18 Nature white 18±1W AC V 312 pcs K 1900±10%LM BLT-T8-LWT288V18 Warm white 18±1W AC V 312 pcs K 1850±10%LM BLT-T8-LDT360V22 Day white 22±1W AC V 336 pcs K 2100±10%LM BLT-T8-LNT360V22 Nature white 22±1W AC V 336 pcs K 2000±10%LM BLT-T8-LWT360V22 Warm white 22±1W AC V 336 pcs K 1950±10%LM

3 Ⅲ Parts performance:, A :Base holder :Made from PC and ABS, resistant to 110 B :Base holder :Made from PC and ABS, resistant to 110 C :Aluminum body: Unique fins al-alloy design, good heat sink, that help to save leds for a long lifespan D :PC cover: Made from PC,that can resistant to 135 E :Power : Power supply of efficiency, low consumption,steady, unique design of anti-lighting,over-currents F :LED source: SMD3528 Epistar G :PCB board :UL passed glass fibre board:model of SK- 2A,(UL No.E250460) Flame retardant ultraviolet fire prevention level is 94V- 0 Ⅳ Advantages The driver fixed on the MCPCB, which can help the power give off heat and keep a long life time Power supply (on PCB board)

4 Ⅴ Unique structure designed to achieve perfect efficacy: Light Effect: No dark area, No glare, Soft light. Good consistency Unique structure design : LED driver on the right side is better than on the back: No dark area, No glare, Soft light. Good consistency (can reach the same lighting effect with the traditional fluorescent tube)

5 Ⅵ Beam angle, 1/2 PC cover,the beam angle can get 180degree Wide beam angle,there is no dark area between tubes, Suitable for places where have a high demand for lights. Such as school, working place, office, etc Remark: Normally led tubes only can make 120 degree

6 Ⅶ Light source test report : 5700K LED tube light Cool white 4000K LED tube light Natural light 3000K LED tube light Warm white

7 Ⅷ Installations (Compatitable with starter and ballast) :, Compatible with starter and ballast, no need to disassemble, eight ways for wire connection Compatible Energy-saving installation:

8 Ⅸ Packing:, NOTE : 1. Pls don't install in the minefields, strong magnetic field and high-pressure region. 2. To avoid short-circuit damage to components and trigger fires, it must ensure a solid correct connection, 3. A well-ventilated installed place to ensure appropriate environmental temperature. 4. Please ensure the local voltage compliance requirements before using this product. 5. Check no short-circuit and confirm wiring is correct and prohibit the live wiring before opening the power. 6. Do not maintain in private if it happens malfunction.

9 Ⅹ Cost Comparison between LED tube and traditional tube, Traditional fluorescent lamp and led lamp Traditional lamp 1.2m lamp LED 1.2m lamp Power 40w 18w Lifespan Less than 8000 hours More than hours Illuminance (2m away from the floor) 85 lux (1200mm) 110 lux(1200mm) Pollution(Mercury) 0.25mg-5mg None Color Rendering >75 UV(Ultra Voilet ) 8 hours equal to 2 hours of the sunlight None Safety glass, fragile PC, not easy to be broken The cost analysis of the traditional fluorescent lamp and LED lamp Traditional fluorescent 1.2m lamp(40w) LED 1.2m lamp(18w) Power factor Power cost of electrical grid electronic converter magnetic converter KW/H 0.029KW/H 0.001KW/H Power cost per lamp 0.040KW/H 0.040KW/H 0.018KW/H Cost per lamp 50RMB 170RMB 1,000 lamp cost 1,000x50=50,000RMB 1,000x170RMB=170,000RMB One year total electricity cost of 1,000 lamps 350,400RMB(not including electricity cost of converter) 157,680RMB LED lamp save 350, ,680=192,720RMB, and you can get the cost back within one year Note: The electrical cost is based on the following assumption: a.1,000 lamps totally, open 24 hours a day,365 days one year; b. the electricity cost is 1RMBKW/H Conclusion: The more expensive electricity you use, the more energy you can save The more you use, the shorter time you can get the cost back Energy saving and environment friendly, low carbon

10 Ⅺ Applications, Application: It is widely used in supermarket, hotel, garage, office, school, factory, decoration lighting project etc. Contact: Jessie MSN: Skype: bluedyled Mobile: