SHENZHEN AGLARE LIGHTING CO., LTD. YJ-T8CA54W T8 Tube Specification

Transcription

1 1 / 6 YJ-T8CA54W T8 Tube Specification 1. Features: ED Q TY:54PCS ED Type:2835SMD ED Input Voltage:AC90~260V 50-60HZ T8 Tube light with 1/2 luminous surface o ballast, starter, or stroboscopic o harmful ultraviolet, infrared, mercury or radiation Aluminum alloy plated heat sink for excellent heat dissipation Widely used in : Homes, Schools, Hospitals, Supermarkets, Offices, etc. Picture: 2, Using pictures: Using sample photos:

2 2 / 6 3.Traditional tube and ED lamp performance comparison: Compare Tube projects type Incandescent (100w) T8 ight bulbs (1.2M) T8 ED bulbs (1.2M) Working life H H H uminance 2000M 2000M 2000M Power dissipation 100W 40W 18W Schematic: p/w 100W t/h 56h 40W 25h 18W 10h lm 2000lm 1kwh kwh Explain: 1.2M T8 ED bulbs 1.2M T8 ight bulbs 100W Incandescent

3 3 / 6 5, Package Dimensions (mm): 6, Absolute Maximum Rating at TA=25 : Part umber Emitting Color Input Voltag e Wattag e Color ED uminous Temperature (k) PMMA Quantit Intensity(m) Cover MI MAX y MI MAX YJ-T8CA54WW Warm white AC90~ 9W /2 54pcs V Stripe YJ-T8CA54W ature white 9W pcs /2 YJ-T8CA54CW Cool white HZ 9W Al 54pcs

4 4 / 6 7. YJ-T8CA54W Characteristic: IGHT EMITTIG DIODE AMPS Absolute maximum ratings (Ta=25 C) Symbol Value Unit Forward current If 20 ma Reverse voltage Vr 5 V Power dissipation Pd 250 mw Operating temperature range Top -25~+80 C Storage temperature range Top -30~+80 C Peak pulsing current(1/8 duty f=1khz) If 125 ma 8. Electrical Draft: TA=25 unless otherwise specified Item Explain Conduction Min. Typ. Max. Unit. Power dissipation AC90~260V,54ED W Power factor AC90~260V,54ED % Power conversion efficiency Center illumination AC90~260V,54ED ų AC90~260V 54ED Height=2.5m 38 lux

5 9, Installtion: SHEZHE AGARE IGHTIG CO., TD. 5 / 6 Replace Method: ( ote: It's an electronic start up tube light. The ballast must be taken out before using. Direct replacement is not allowed.) 1. First remove the fluorescent tubes from the lamp stent. 2. Remove the ballast and the starter: if it s an electronic ballast, please remove it in accordance with the figure1 and figure2. Figure1 is the former circuit and figure2 is the updated circuit; if there are the inductance ballast and the starter, please remove them in accordance with the figure3 and figure4. Figure3 is the former circuit and Figure4 is the updated circuit. Be sure to use this ED energy-saving lamp according to the circuit of Figure2 or the circuit of Figure4. 3. Install the ED energy-saving lights at the original location of the fluorescent tubes.(otice: The light must install downward) 4. Rotate the tube lightly and make illumination angle good. Electronic ballast 2 Circuit of ED energy-saving lamp 1 Circuit of electronic fluorescent S Inductance ballast 3 Circuit of inductance fluoescent 4 Circuit of ED energy-saving lamp Or for easily install 2 Remove starter 3 1 Remove T8 or T10 Tube AC 2 Remove starter Install ED Tube 3 Remove Eledromagnetic ballast AC 4 1 Install ED Tube Remove T8 or T10 Tube

6 6 / Package Information: Protect Coat Size (cm) Qty/ Protect coat (PCS) Into Box Size (cm) Qty/Into BOX Outside coat Size Qty/ Outside coat Total Weight 75*4*4 1 75*22* *22* (kg) ED Tube ight Into Box Protect Coat Out side carton 12. After-sales service: All products have one year quality guarantee under right and normal using condition. Quality warranty is based on correct conservation, assemblage, use and maintenance. In case problem within promised time, Aglare will solve it by repair, substitute accessories or replace at your option. Upon exceeding the promised time, there will be material and maintenance fees to be paid. TE: FAX: service@aglare.cn