Rapporto N R2
|
|
- Donna Stanley
- 5 years ago
- Views:
Transcription
1 * R2* R2 Rapporto N R2 This report cancels and replaces the previous one ( R1) issued on 23/12/2013 Spett. EURASIA SPA Undicesima strada, 1 - Interporto sito nord Rivalta di Torino (TO) Data ricevimento campione: 20/12/2013 Data inizio Prove: 20/12/2013 Data fine Prove: 05/02/2014 Data emissione Rapporto: 05/02/2014 Descrizione campione: caschetto mod easy Difetti riscontrati prima delle prove: NESSUN DIFETTO VERIFICHE ESAMI PROVE EFFETTUATE EN 1078:2012- Helmets for pedal cyclist and for users of skateboards and roller skates* * Test assigned to subcontractor Responsabile Laboratorio Alessia Quintieri CONCLUSIONI COMPLIES Direzione Tecnica Dr. Ing. Natale Consonni Nota: è vietata la riproduzione, anche in forma parziale del presente rapporto, qualsivoglia modifica od alterazione dello stesso. I risultati si riferiscono esclusivamente ai campioni testati. I giudizi sono espressi con esclusivo riferimento alle parti dettagliate in ciascun Rapporto di Prova e sulla base dei limiti ivi specificati. Il campionamento è stato effettuato a cura del cliente Pag 1 di 8
2 General Requirements for Different Size The helmet indipendently of their size shall satisfy the requirements regarding materials, ergonomics, their mass and their retention system. Size considered: Determination of the Mass Clauses 5.2 Determine the mass of the helmets of the same size submitted for testing. Calculate and record the mean value in grounded off to the nearest 10g. Sample Size Mass medium value (g) ,..., Structural Requirements of the Retention System Clauses 4.6.1,..., The helmet retention system shall be as follows: Retaining system: The helmet shall be provided for retaining on the wearer s head. All parts of the retention system shall be securely attached to the helmet; Retaining system: The helmet shall be provided for retaining on the wearer s head. All parts of the retention system shall be securely attached to the helmet. Chin strap: Any chin strap shall not include a chin cup, shall be not less than 15 mm wide and may be fitted with means of enhancing comfort for the wearer; Regolation: The retention system shall be fitted with a device to adjust and maintain tension in the system; The device shall be capable of adjustment so that buckle does not sit on the jaw bone; Color: No part of the retention system shall be coloured green. Examination of the retaining retention system Examination of the chin strap Examination of the regolation of the retention system Examination of the color of the retention system Pass Pass Pass Pass Rapporto R2 Page 2 of 8
3 Requirements for Size 56 Shell Field Vision Clause 4.3 The helmet shall be no occultation in the field of vision bounded by angles as follows: horizontally min 105 grads from the longitudinal vertical median plane to the left and right hand sides; upwards min 25 grades from the reference plane; downwards min 45 grade from the basic plane. Size of the test headform (cm) horizontally field vision upwards field vision downwards field vision Pass Pass Pass Effectiveness of the retention system Clause The helmet shall not come off the headform. Sample Size of the headform (cm) Observation Result Pass Resistance of the Retention System and the Ease of Release Clauses e The dynamic extension of the retention system shall not exceed 35 mm and the residual extension shall not exceed 1 25 mm. Following the strenght test with the load still applied, it shall be possible to open the release system with one hand. Size of the test Dynamic Residual Ease of release Results headform (cm) elongation (mm) elongation (mm) Possible Pass Possible Pass Shock Absorbing Capacity Clause 4.4 The helmet shall give protection to the forehead, rear, sides, temples and crown of the head. The peak acceleration shall not, for each impact, exceed 250 g for the velocity of / 0 m/s on the flat and / 0 on the kerstone anvil. The tollerance on the velocity is +0.10/-0.00 m/s. The impact test are identificated as follows: B = Anterior area; Xs, Xd = Lateral area left and right; P = Upper area; R = Posterior Area. Rapporto R2 Page 3 of 8
4 Size test headform (cm) Conditioning Anvil Impact point Acceleration (g) Velocity (m/s) Result C Kerb B Pass C Flat R/Xs Pass C Flat P Pass C Kerb Xd Pass Artificial Kerb R Pass Ageing Artificial Ageing Flat P/B Pass Durability Clause 4.5 After the tests the helmet shall not exhibit damage that could cause significant injury to the weaver (sharp edges). The examination of the helmets given the following results: Sample Size Test ,..., 3 56 Pass Rapporto R2 Page 4 of 8
5 Requirements for Size 54 Shell Field Vision Clause 4.3 The helmet shall be no occultation in the field of vision bounded by angles as follows: horizontally min 105 grads from the longitudinal vertical median plane to the left and right hand sides; upwards min 25 grades from the reference plane; downwards min 45 grade from the basic plane. Size of the test headform (cm) horizontally field vision upwards field vision downwards field vision Pass Pass Pass Effectiveness of the retention system Clause The helmet shall not come off the headform. Sample Size of the headform (cm) Observation Result Pass Resistance of the Retention System and the Ease of Release Clauses e The dynamic extension of the retention system shall not exceed 35 mm and the residual extension shall not exceed 2 25 mm. Following the strenght test with the load still applied, it shall be possible to open the release system with one hand. Size of the test Dynamic Residual Ease of release Results headform (cm) elongation (mm) elongation (mm) Possible Pass Possible Pass Shock Absorbing Capacity Clause 4.4 The helmet shall give protection to the forehead, rear, sides, temples and crown of the head. The peak acceleration shall not, for each impact, exceed 250 g for the velocity of / 0 m/s on the flat and / 0 on the kerstone anvil. The tollerance on the velocity is +0.10/-0.00 m/s. The impact test are identificated as follows: B = Anterior area; Xs, Xd = Lateral area left and right; P = Upper area; R = Posterior Area. Report R2 Page 5 of 8
6 Durability Clause 4.5 Size test headform (cm) After the tests the helmet shall not exhibit damage that could cause significant injury to the weaver (sharp edges). The examination of the helmets given the following results: Conditioning Anvil Impact point Acceleration (g) Velocity (m/s) Sample Size Test ,..., 6 54 Pass Result C Kerb Xd Pass C Flat P Pass C Flat P Pass C Kerb R Pass Artificial Kerb B Pass ageing Artificial ageing Flat P/R Pass Report R2 Page 6 of 8
7 Requirements for Size 52 Shell Field Vision Clause 4.3 The helmet shall be no occultation in the field of vision bounded by angles as follows: horizontally min 105 grads from the longitudinal vertical median plane to the left and right hand sides; upwards min 25 grades from the reference plane; downwards min 45 grade from the basic plane. Size of the test headform (cm) horizontally field vision upwards field vision downwards field vision Pass Pass Pass Effectiveness of the retention system Clause The helmet shall not come off the headform. Sample Size of the headform (cm) Observation Result Pass Resistance of the Retention System and the Ease of Release Clauses e The dynamic extension of the retention system shall not exceed 35 mm and the residual extension shall not exceed 2 25 mm. Following the strenght test with the load still applied, it shall be possible to open the release system with one hand. Size of the test Dynamic Residual Ease of release Results headform (cm) elongation (mm) elongation (mm) Possible Pass Possible Pass Shock Absorbing Capacity Clause 4.4 The helmet shall give protection to the forehead, rear, sides, temples and crown of the head. The peak acceleration shall not, for each impact, exceed 250 g for the velocity of / 0 m/s on the flat and / 0 on the kerstone anvil. The tollerance on the velocity is +0.10/-0.00 m/s. The impact test are identificated as follows: B = Anterior area; Xs, Xd = Lateral area left and right; P = Upper area; R = Posterior Area. Report R2 Page 7 of 8
8 Durability Clause 4.5 Size test headform (cm) After the tests the helmet shall not exhibit damage that could cause significant injury to the weaver (sharp edges). The examination of the helmets given the following results: Conditioning Anvil Impact point Acceleration (g) Velocity (m/s) Sample Size Test ,..., 9 52 Pass Result C Kerb Xd Pass C Flat B/Xd Pass C Flat B Pass C Kerb R Pass Artificial Kerb B/Xs Pass ageing Artificial ageing Flat P Pass Report R2 Page 8 of 8
GB Translated English of Chinese Standard: GB NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB 811-2010 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 13.340.20 C 73 GB 811-2010 Replacing GB
More informationDRAFT TANZANIA STANDARD
TANZANIA STANDARD MEDC 9 (3641) P3 DRAFT TANZANIA STANDARD MEDC 9 (3641) P3- Protective Helmets for Motorcycle Riders Specification. TANZANIA BUREAU OF STANDARDS 1 0 FORWORD Since independence Tanzania
More informationCOMPLIANCE TESTING FOR FMVSS No. 218 MOTORCYCLE HELMETS. Southwest Research Institute. Jiangmen Pengcheng Helmets Ltd.
S O U T H W E S T R E S E A R C H I N S T I T U T E 622 CULEBRA ROAD POST OFFICE DRAWER 2851 SAN ANTONIO, TEXAS 78228-51, USA (21) 684-5111 WWW.SWRI.ORG COMPLIANCE TESTING FOR FMVSS No. 218 MOTORCYCLE
More informationPRODUCT: SHELBLAST WITH PEAK HAVING WEBBING CRADLE WITH RATCHET TYPE ADJUSTMENT REF. No. : PN 542(T)
PRODUCT: SHELBLAST WITH PEAK HAVING WEBBING CRADLE WITH RATCHET TYPE ADJUSTMENT REF. No. : PN 542(T) DOC. NO. QF/RD/05 ISSUE 01 REVISION 00 DATE 10-09-2015 CONFORMING TO IS: 2925:1984 & EN 397: 2012 SL.
More information1998 Addendum to the 1995 STANDARD FOR PROTECTIVE HEADGEAR. For Use With Bicycles. and to the 1994 STANDARD FOR PROTECTIVE HEADGEAR
1998 Addendum to the 1995 STANDARD FOR PROTECTIVE HEADGEAR For Use With Bicycles and to the 1994 STANDARD FOR PROTECTIVE HEADGEAR for Use in Non-Motorized Sports Introduction This document modifies the
More informationSpecification for Rubber Hand Gloves for Electrical purpose
Specification for Rubber Hand Gloves for Electrical purpose Sr. No. Particular Specification 1 Certification EN 60903 with latest amendments. 2 Class of gloves Class 1 3 Working 7.5 KV 4 Test 10 KV AC
More informationSFI SPECIFICATION 41.1 EFFECTIVE: MARCH 27, 2013 *
SFI SPECIFICATION 41.1 EFFECTIVE: MARCH 27, 2013 * PRODUCT: Motorsports Helmet 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards for evaluating
More informationCode of Federal Regulations
Code of Federal Regulations (c) Accelerations in excess of 150g shall not exceed a cumulative duration of 4.0 milliseconds. Title 49 - Transportation Volume: 6 Date: 2011-10-01 Original Date: 2011-10-01
More informationNat l Highway Traffic Safety Admin., DOT
Nat l Highway Traffic Safety Admin., DOT 571.218 [37 FR 9395, May 10, 1972, as amended at 37 FR 18035, Sept. 6, 1972; 38 FR 6070, Mar. 6, 1973; 38 FR 7562, Mar. 28, 1973; 39 FR 15274, May 2, 1974; 40 FR
More informationList of Recommendation for Use Sheets VERTICAL GROUP 1 (Version 12/2012)
List of Recommendation for Use Sheets VERTICAL GROUP 1 (Version 12/2012) No. Version Reference Key words Approved by Vertical Group 1 01.001 01 EN 397:1995 (+A1) & EN 397:2012, Clause 6.11.2 01.002 01
More informationHelmet Stability and Fit in Australian Pedal and Motor Cyclist. Populations
Helmet Stability and Fit in Australian Pedal and Motor Cyclist Populations K.T. Thai, T.Y. Pang, A.S. McIntosh, E. Schilter School of Risk and Safety Sciences, The University of New South Wales, Sydney,
More informationPresentation of the draft Global Technical Regulation on Safety Belts
Informal Document N 18 (30th GRSP, 3-6 December 2001 Agenda item 1.3.4) November 28 th, 2001 Presentation of the draft Global Technical Regulation on Safety Belts The draft global technical regulation
More informationProposal for 10 series of amendments to Regulation No. 17 (Strength of seat)
Submitted by the expert from CLEPA Informal document GRSP-64-25 (64 th GRSP, 11-14 December 2018, agenda item 9) Proposal for 10 series of amendments to Regulation No. 17 (Strength of seat) The text reproduced
More informationTHERMOGUARD TG4 RX FRP Textile - 4 point Plastic Brushed cloth on foam Ratchet fit
Head protection 72 State-of-the-art manufacturing process: Modern moulding technology along with stringent production control - ensuring safe and reliable operations. Durability: Virgin raw material like
More informationSNELL / FIA CM2016 STANDARD FOR PROTECTIVE HEADGEAR. For Use in Children s Motor Sports Activities FOREWORD
SNELL / FIA CM2016 STANDARD FOR PROTECTIVE HEADGEAR For Use in Children s Motor Sports Activities FOREWORD In motor sports accident, participants may suffer injury or death. Helmets on the market today
More information2007 STANDARD FOR PROTECTIVE HEADGEAR
2007 STANDARD FOR PROTECTIVE HEADGEAR For Use in Children s Motor Sports The Snell Memorial Foundation Incorporated, as a Not-For-Profit organization under IRS section 501(C)(3), has registered in its
More informationBy Authority Of THE UNITED STATES OF AMERICA Legally Binding Document
By Authority Of THE UNITED STATES OF AMERICA Legally Binding Document By the Authority Vested By Part 5 of the United States Code 552(a) and Part 1 of the Code of Regulations 51 the attached document has
More informationTHE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY
THE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY COMMUNICATION CONCERNING THE APPROVAL GRANTED (1) / APPROVAL EXTENDED (1) / APPROVAL REFUSED (1) / APPROVAL WITHDRAWN (1) / PRODUCTION DEFINITELY DISCONTINUED
More information2.0 TEST RECORDS - All records of inspection and tests shall be kept in suitable forms approved by the Bureau of Indian Standard (BIS).
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PROTECTIVE HELMETS FOR MOTOR CYCLE RIDERS ACCORDING TO IS 4151:1993 1.0 LABORATORY A laboratory shall be maintained which shall be suitably equipped
More information2001 STANDARD FOR PROTECTIVE HEADGEAR
2001 STANDARD FOR PROTECTIVE HEADGEAR The Snell Memorial Foundation Incorporated, as a Not- For-Profit organization under IRS section 501(C)(3), has registered in its Articles of Incorporation with the
More informationX-RETENTION UPGRADE KIT WITH ADJUSTABLE NAPE PAD
Installation Instructions X-RETENTION UPGRADE KIT WITH ADJUSTABLE NAPE PAD 2012 Gentex Corporation When you replace components or install additional components on Gentex products, always use genuine factory-new
More informationOwner s Manual. 16 Green Machine Assembly Instructions THIS DOCUMENT CONTAINS IMPORTANT SAFETY INFORMATION. READ AND KEEP FOR FUTURE REFERENCE.
Owner s Manual 16 Green Machine Assembly Instructions THIS DOCUMENT CONTAINS IMPORTANT SAFETY INFORMATION. READ AND KEEP FOR FUTURE REFERENCE. Date of Purchase: Please write the date of purchase. You should
More informationTHE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY. 3. Sizes: YM / YL / XS / S / M / L / XL / XXL 63
THE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY COMMUNICATION CONCERNING THE APPROVAL GRANTED (1) / APPROVAL EXTENDED (1) / APPROVAL REFUSED (1) / APPROVAL WITHDRAWN (1) / PRODUCTION DEFINITELY DISCONTINUED
More informationSTANDARD PNEUMATIC RAM TEST METHOD AND EQUIPMENT USED IN EVALUATING THE PERFORMANCE CHARACTERISTICS OF PROTECTIVE HEADGEAR AND FACE GUARDS
STANDARD PNEUMATIC RAM TEST METHOD AND EQUIPMENT USED IN EVALUATING THE PERFORMANCE CHARACTERISTICS OF PROTECTIVE HEADGEAR AND FACE GUARDS NOCSAE DOC (ND) 081-18am18 Prepared By NATIONAL OPERATING COMMITTEE
More informationShort Test protocol for for attendant operated stair-climbing devices
Short Test protocol for for attendant operated stair-climbing devices client: Ulrich Alber GmbH Vor dem Weißen Stein 21 D-72461 Albstadt Manufacturing location: Ulrich Alber GmbH Vor dem Weißen Stein 21
More informationE/ECE/324/Rev.1/Add.15/Rev.7/Corr.1 E/ECE/TRANS/505/Rev.1/Add.15/Rev.7/Corr.1
E/ECE/34/Rev.1/Add.15/Rev.7/Corr.1 5 November 01 Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be fitted and/or be used on Wheeled
More informationTHE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY
THE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY COMMUNICATION CONCERNING THE APPROVAL GRANTED () / APPROVAL EXTENDED () / APPROVAL REFUSED () / APPROVAL WITHDRAWN () / PRODUCTION DEFINITELY DISCONTINUED
More informationMedium pressure relief valve AISI 316L Stainless steel AISI 316L relief valves, suitable for compressed air, gas and liquid
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 30 2035 info@idinsertdeal.com www.idinsertdeal.com Medium pressure relief valve AISI 316L Stainless steel AISI 316L relief valves, suitable
More information1998 ADDENDUM TO STANDARDS FOR PROTECTIVE HEADGEAR. For Children Four years of Age and Younger For Use in Bicycling Foreword
1998 ADDENDUM TO STANDARDS FOR PROTECTIVE HEADGEAR For Children Four years of Age and Younger For Use in Bicycling Foreword This addendum applies to two different helmet standards promulgated by the Snell
More informationTabella generale Carburo di tungsteno Ordering guide Tungsten carbide
Tabella generale Carburo di tungsteno Ordering guide Tungsten carbide 2 Nr. di giri massimo ammissibile/maximum permissible speed a = ) 100 giri al min. 1 /rpm b = ) 500 giri al min. 1 /rpm c = ) 800 giri
More informationDISTRIBUTED BY OLTREMOTO S.R.L.
www.helmo-milano.it DISTRIBUTED BY OLTREMOTO S.R.L. SI APRE UNA NUOVA ERA Il riferimento alla patria della moda e del design italiano è chiaro, a partire dal nome. Helmo Milano è un incursione originale
More informationNovitaTech Engineering
NovitaTech Engineering 490869 TEST REPORT FOR PDG Product Design Group Eclipse 600 MANUAL WHEELCHAIR TEST DOCUMENTS AS3695:1992, AS3696-1:1990, AS 3696-3:1990, AS 3696-5:1989, AS 3696-8:1998, ISO 7176-7:1996
More informationTHE CORPORATION OF THE CITY OF PENTICTON SKATEBOARD PARK HELMET BYLAW NO
This is a consolidated bylaw prepared by The Corporation of the City of Penticton for convenience only. The city does not warrant that the information contained in this consolidation is current. It is
More informationDIPARTIMENTO PER LA REGOLAZIONE DEL MERCATO DIREZIONE GENERALE PER LA VIGILANZA E LA NORMATIVA TECNICA TEST CERTIFICATE UCM 98/002-A - REVISION I
Copy of the original translated into English Ministero dello Sviluppo Economico DIPARTIMENTO PER LA REGOLAZIONE DEL MERCATO DIREZIONE GENERALE PER LA VIGILANZA E LA NORMATIVA TECNICA TEST CERTIFICATE UCM
More informationL12MD L38MD. Modular oil fog lubricators, suitable for compressed air FEATURES. Oil fog lubricator for inlet pressure up to 30 bar (435 psi).
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com L12MD L38MD Modular oil fog lubricators, suitable for compressed air FEATURES Oil fog lubricator
More informationTECHNOLOGY AT YOUR SERVICE
TECHNOLOGY AT YOUR SERVICE The FL.Rd headlamp provides ultra-high performance in a range of fields such as agriculture, utility vehicles, off road, marine, roadworks and construction. This is the result
More informationTEST REPORT Report No.: R-cn E-S2 Page 1 of 9
Report No.: R-cn5-1505057-E-S2 Page 1 of 9 Applicant Name Applicant Address : WINHAND TOYS MANUFACTURING CO.,LTD : NO.106 HAIFA ROAD, HAICANG INDUSTRIAL DISTRICT, XIAMEN, CHINA. The following information
More informationDoc:TED 11(794)W 1 September 2012 Draft Standard Automotive Vehicles - Windscreen Wiping System for 3 Wheeler Vehicles - Specification
For Comments only Doc:TED 11(794)W 1 September 2012 Draft Standard Automotive Vehicles - Windscreen Wiping System for 3 Wheeler Vehicles - Specification Not to be reproduced without permission Last date
More informationInfant Restraint Systems
TEST METHOD 213.1 Infant Restraint Systems Revised: Issued: May 2012R April 1, 1982 (Ce document est aussi disponible en français) Table of Contents 1. Introduction... 1 2. Test Devices to be Used... 1
More informationTabella generale Diamantate Ordering guide Diamond
Tabella generale Diamantate Ordering guide Diamond 2 Nr. di giri massimo ammissibile/maximum permissible speed a = ) 100 giri al min. 1 /rpm b = ) 500 giri al min. 1 /rpm c = ) 800 giri al min. 1 /rpm
More informationEXTRACT of chapter XXXIV coupling devices (version of ) ANNEX XXXIV Requirements on mechanical couplings
EXTRACT of chapter XXXIV coupling devices (version of 18.09.2013) ANNEX XXXIV Requirements on mechanical couplings Definitions specific to this Annex Mechanical coupling between tractor and towed vehicle
More informationEconomic and Social Council
United Nations Economic and Social Council ECE/TRANS/WP.29/2017/59 Distr.: General 5 April 2017 Original: English Economic Commission for Europe Inland Transport Committee World Forum for Harmonization
More informationunit Motor oil capacity [kg] 52 minimum Maximum casing pressure continuo NOTES
GS2 Displacement Cilindrata Bore Alesaggio Stroke Corsa Specific torque Coppia specifica Continuous pressure(¹) Pressione in continuo(¹) Peak pressure Pressione di picco Peak power (²) Potenza di picco
More informationXD XG Counterbalanced diesel and lpg forklifts 1.5t to 3.0t
XD XG 15-30 Counterbalanced diesel and lpg forklifts 1.5t to 3.0t Strong and Reliable diesel and lpg engine trucks, 1.5t, 1.8t, 2.0t, 2.5t and 3.0t with balance, unify a moderrn design with best functionality.
More informationE/ECE/324/Rev.1/Add.16/Rev.5 E/ECE/TRANS/505/Rev.1/Add.16/Rev.5
26 June 2014 Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions for
More information3-phase motors Vector-Speed Synchronous motors
SQ SERIES Dati Generali/General Data Forma costruttiva / Mounting IM 2001 (B35) Protezione motore / Motor Protection type SQC IP 54 (IP 55 ) 2) Equilibratura / Balancing grado R R degree grad R Isolamento
More informationSTANDARD PNEUMATIC RAM TEST METHOD AND EQUIPMENT USED IN EVALUATING THE PERFORMANCE CHARACTERISTICS OF PROTECTIVE HEADGEAR AND FACE GUARDS
STANDARD PNEUMATIC RAM TEST METHOD AND EQUIPMENT USED IN EVALUATING THE PERFORMANCE CHARACTERISTICS OF PROTECTIVE HEADGEAR AND FACE GUARDS NOCSAE DOC (ND) 081-14m15 Prepared By NATIONAL OPERATING COMMITTEE
More informationRps Available Body. Standard CLAMP 1/2" BS. Optional fil. gas m. 3/8"- 1/2" Optional CLAMP 1" BS RPS-05AJZCH-XX-31A
Standard CLAMP 1/2" BS Esecuzione H a faccia piana H execution flat face -05AGPAH-XX-31A Rps Available Body RPQ-05AGPBH-XX-31A Esecuzione T con tubo di sample T execution with sampling pipe -05AHZCT-XX-31A
More informationThe Strength of a French Manufacturer
The Strength of a French Manufacturer OPUS OÉNI II VISIOÉNI II OPLE ORYON TLIP ustomise Standard EN 397: Resistance to impacts and penetration at -10. Resistance to impacts and penetration at +50. dditional
More informationDoc:TED 11(794)W Dec Draft Standard Automotive Vehicles - Windscreen Wiping System for 3 Wheeler Vehicles - Specification
For Comments only Doc:TED 11(794)W Dec 2010 Draft Standard Automotive Vehicles - Windscreen Wiping System for 3 Wheeler Vehicles - Specification Not to be reproduced without permission Last date for receipt
More informationApplication of Reverse Engineering and Impact Analysis of Motor Cycle Helmet
Indian Journal of Science and Technology, Vol 9(34), DOI: 10.17485/ijst/2016/v9i34/100989, September 2016 ISSN (Print) : 0974-6846 ISSN (Online) : 0974-5645 Application of Reverse Engineering and Impact
More informationBOX A3 TEST R. Bocconi. REL. DATE R.T. Check and Approval
BOX A3 TEST 7 20-02-2018 R. Bocconi REL. DATE R.T. Check and Approval INDEX 1 - FOREWORD...... Page 3 2 - BOX A3 TEST FOR HYDRAULIC LIFTS... Page 3 2.1 GENERAL OPERATION... Page 3 2.2 HOW THE CHECK OF
More informationOwner s Manual for 16 Slider
Owner s Manual for 16 Slider This manual contains important safety, assembly, operation and maintenance information. Please read and fully understand this manual before operation. Save this manual for
More informationR3123. Stainless steel AISI 316L pressure regulator, for compressed air, gas and liquid FEATURES
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com R3123 Stainless steel AISI 316L pressure regulator, for compressed air, gas and liquid
More informationMarine Catalogue. Catalogo Nautica
Marine Catalogue Catalogo Nautica 2013 CERTIFICATO N. CERTIFICATE No. EMS-2985/S SI CERTIFICA CHE IL SISTEMA DI GESTIONE AMBIENTALE DI IT IS HEREBY CERTIFIED THAT THE ENVIRONMENTAL MANAGEMENT SYSTEM OF
More informationFolksam bicycle helmets for children test report 2017
2017 Folksam bicycle helmets for children test report 2017 Summary Folksam has tested nine bicycle helmets on the Swedish market for children. All helmets included in the test have previously been tested
More informationOwner s Manual Folding Trike
Owner s Manual Folding Trike THIS MANUAL CONTAINS IMPORTANT SAFETY, ASSEMBLY, OPERATION AND MAINTENANCE INFORMATION. PLEASE READ AND FULLY UNDERSTAND THIS MANUAL BEFORE OPERATION. SAVE THIS MANUAL FOR
More informationDavid Fagan, Mobility Manager Paragon Mobility Pty Ltd 3/10 Tapnor Crescent, Brendale, Queensland th December, 2011.
David Fagan, Mobility Manager Paragon Mobility Pty Ltd 3/10 Tapnor Crescent, Brendale, Queensland. 4500 15 th December, 2011 Dear David, Reference: testing the Catalyst Spark manual wheelchair to 77 kg
More informationTest Report No.: AJHL FT Date: JUN.02, 2016 Page 1 of 5
Test Report No.: AJHL1605004946FT Date: JUN.02, 2016 Page 1 of 5 The following sample(s) was / were submitted and identified on behalf of the client as: Sample Description OFFICE CHAIR Type/Style K-106AH
More informationSede: Via Antica, 24/ S. Giovanni al Nat. UD Tel r.a. Fax
Date received: 11/07/14 Date of issue: 02/09/14 CERATOLA S.P.A. VIA GIORGIOE 2-ZOA ID.LE 31037 RAMO DI LORIA (TV) Report consists of 11 test reports. Defects before testing: one Sample name: REVOLUTIO
More informationE Dec-16 THE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY
THE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY COMMUNICATION CONCERNING THE APPROVAL GRANTED (1) / APPROVAL EXTENDED (1) / APPROVAL REFUSED (1) / APPROVAL WITHDRAWN (1) / PRODUCTION DEFINITELY DISCONTINUED
More informationMax. particle size 5 µm. Pressure for determining piston forces Repetitive precision. Polyurethane
Piston rod cylinders Guide cylinders 1 Ambient temperature min./max. +0 C / +60 C edium Compressed air ax. particle size 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Pressure for determining piston
More informationM2010 Time Line and Test Issues EBB, October 10, 2007
The M2010 Standard is now in its final form. There may be some editorial changes in the text before it is published in booklet form but the testing and other requirements will not be affected. This standard
More informationProposal for the 09 series of amendments to Regulation No. 17
Informal document No. GRSP-58-28-Rev.1 Proposal for the 09 series of amendments to Regulation No. 17. Alignment to gtr No. 7 head restraints The text reproduced below was prepared by the experts from Japan
More information210FR. Aluminum medium pressure filter regulator, suitable for compressed air FEATURES. Filter-Regulator for inlet pressure up to 30 bar (435 psi).
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com 210FR Aluminum medium pressure filter regulator, suitable for compressed air FEATURES Filter-Regulator
More informationTest Report No.: SDHL FT Date: May 15, 2017 Page 1 of 15
Test Report No.: SDHL1703004564FT Date: May 15, 2017 Page 1 of 15 HERMAN MILLER NO.488, QIAN TANG JIANG RD., BEILUN, NINGBO, ZHEJIANG, 315800, P.R. CHINA The following sample(s) was / were submitted and
More informationHPA LARGER SERIES AC ELECTRIC MOTOR
HPA LARGER SERIES AC ELECTRIC MOTOR HPA LARGER SERIES AC ELECTRIC MOTOR 25 O 25 P = N N.4 ø 14 = A C ø1/4"bsp with plug F G N.2 M E EMMEGI SpA www.emmegi-heat-exchangers.com DESIGN AND MANUFACTURE OF
More informationE/ECE/324/Rev.2/Add.128/Rev.1/Amend.2 E/ECE/TRANS/505/Rev.2/Add.128/Rev.1/Amend.2
E/ECE/324/Rev.2/Add.128/Rev.1/Amend.2 26 July 2017 Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled
More information} Rev.1/Add.52/Rev.2/Amend.2
19 February 2010 AGREEMENT CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS FOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTED AND/OR BE USED ON WHEELED VEHICLES AND THE CONDITIONS
More informationIGUZZINI ILLUMINAZIONE SPA VIA MARIANO GUZZINI RECANATI MC IT - Italy
PID: 04010010 CID: C.1993.1550 Certificato di approvazione Approval certificate IMQ, ente di certificazione accreditato, autorizza la ditta IMQ, accredited certification body, grants to IGUZZINI ILLUMINAZIONE
More informationExperience makes the difference
Experience makes the difference COLLECTIONwww.arai.nl 44 SETTING THE STANDARD AT THE FOREFRONT OF MOTORSPORT Arai has been at the forefront of car racing for many decades and to date, many of the world
More informationTabella generale Carburo di tungsteno Ordering guide Tungsten carbide
Tabella generale Carburo di tungsteno Ordering guide Tungsten carbide 2 Nr. di giri massimo ammissibile/maximum permissible speed a = ) 100 giri al min. 1 /rpm b = ) 500 giri al min. 1 /rpm c = ) 800 giri
More informationAMENDMENT NO December 2015 AIS-072
AMENDMENT NO. 2 15 December 2015 To Approval of Restraining Devices for Child Occupants of Power-Driven Vehicles ( Child Restraint System ) 1. Page 9/120, clause 4.5 Substitute following text and figure
More informationTEST REPORT FOR: Product Design Group Inc. Stellar Tilt Manual Wheelchair to 114kg
TEST REPORT FOR: Product Design Group Inc. Stellar Tilt Manual Wheelchair to 114kg LABORATORY REFERENCE 492558 30th June 2016 Page 1 of 15 REFERENCED DOCUMENTS IN THIS REPORT: AS/NZS 3695.1:2011 Part 1:
More informationTEST REPORT N
centro ricerche-sviluppo e laboratori prove Date received: 21-12-11 Date of issue: 10-01-12 ILPO S.P.A. VIA FRIULI 1-3 - OSTERIA GRADE 40024 CASTEL SA PIETRO TERME (BO) Report consists of 11 test reports.
More informationU.S. DEPARTMENT OF TRANSPORTATION
TP-218-04 June 27, 2003 U.S. DEPARTMENT OF TRANSPORTATION NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION LABORATORY TEST PROCEDURE FOR FMVSS 218 Motorcycle Helmets SAFETY ASSURANCE Office of Vehicle Safety
More informationDYNATECH PROGRESSIVE SAFETY GEAR PR-2500-UD (V.50)
DYNATECH PROGRESSIVE SAFETY GEAR PR-2500-UD (V.50) INSTRUCTIONS FOR USE AND MAINTENANCE - 1 - - 2 - - 3 - - 4 - - 5 - - 6 - INSTRUCTIONS FOR USE AND MAINTENANCE 1. GENERAL INDICATIONS. 2. SAFETY GEAR INSTALLATION.
More informationUNIVERSAL WHEEL TRIMS COPRICERCHI UNIVERSALI
COPRICERCHI UNIVERSALI 129 WHEEL COVERS FARAD is present on the trade from more than 30 years, with the widest range of wheel trims in Europe, establishing as one of the trade leaders. THE products are
More informationFRL12MD FRL38MD. Group filter + regulator + oil fog lubricator, made of aluminium, suitable for compressed air FEATURES
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com FRL12MD FRL38MD Groups filter + regulator + oil fog lubricator made of aluminium, suitable
More informationProtective capability of bicycle helmets
Br. J. Sp. Med., Vol 24, No. 1 Protective capability of bicycle helmets N. J. Mills, PhD School of Metallurgy and Materials, University of Birmingham Cycle helmets that meet UK and US standards have been
More informationAudrey con rivestimento in silicone e testa in materiale composito. Audrey with silicone covering and composite head.
Califfa con rivestimento colore testa di moro e oro rosa anodizzato Califfa with dark brown covering and anodized rose gold. Califfa con rivestimento colore bordeaux e testa nero cromato. Califfa with
More informationCYLINDRICAL CAM INDEXING ROTARY TABLES IR TABLES HEAVY SERIES IR IR IR 2001 COLOMBO FILIPPETTI SPA
CYLINDRICAL CAM INDEXING IR HEAVY SERIES COLOMBO FILIPPETTI SPA Sealed electrowelding gear housing. Indexing output plate with fixed central through hole. Input shaft and worm screw on opposite taper roller
More informationApproval certificate. Certificato di approvazione CA IGUZZINI ILLUMINAZIONE SPA VIA MARIANO GUZZINI RECANATI MC IT - Italy
PID: 04010001 CID: C.1993.1550 Certificato di approvazione Approval certificate IMQ, ente di certificazione accreditato, autorizza la ditta IMQ, accredited certification body, grants to IGUZZINI ILLUMINAZIONE
More informationBASE COLONNA FRIGO REFRIGERATOR
SE OLONN FRIGO REFRIGERTOR SE SE OLONN FRIGO REFRIGERTOR SE L SE OLONN FRIGO SILM È RELIZZT IN MTERILE TERMOPLSTIO D ELEVT RESISTENZ TERMI, DIMENSIONLE E MENI. QUEST SE È STT STUDIT PER ESSERE ESTETIMENTE
More informationApproval certificate. Certificato di approvazione CA IGUZZINI ILLUMINAZIONE SPA VIA MARIANO GUZZINI RECANATI MC IT - Italy
PID: 04010010 CID: C.1993.1550 Certificato di approvazione Approval certificate IMQ, ente di certificazione accreditato, autorizza la ditta IMQ, accredited certification body, grants to IGUZZINI ILLUMINAZIONE
More informationProposal for the 02 series of amendments to Phase 2 of Regulation No. 129 (Enhanced Child Restraint Systems)
Submitted by the expert from France Informal document GRSP-58-08 (58th GRSP, 7-11 December 2015, agenda item 19) Proposal for the 02 series of amendments to Phase 2 of Regulation No. 129 (Enhanced Child
More informationRequirements on vehicle occupant protection, including interior fittings, head restraints, seat belts, vehicle doors
L 42/70 EN Official Journal of the European Union 17.2.2015 ANNEX XIII Requirements on vehicle occupant protection, including interior fittings, head restraints, seat belts, vehicle doors 1. Definitions
More information2017 LED Emergency kit
LED Emergency kit 2017 Emergency Unit for LED Componenti per illuminazione di Emergenza Components for Emergency Lighting IP0 IP66 APF produce una gamma completa di sistemi di emergenza in KIT In order
More informationWHO MUST WEAR A HELMET?
Correctly wearing a helmet that meets standards can reduce the severity of head injuries sustained in an accident or even prevent a fatality. It is a simple yet effective means of preventing head injury
More informationF14MD F18MD. Modular filters, suitable for compressed air FEATURES. Filter for inlet pressure up to 30 bar (435 psi).
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com F14MD F18MD Modular filters, suitable for compressed air FEATURES Filter for inlet pressure
More informationLumina series. vetro temperato 6mm tempered thick glass 6mm
90 vetro temperato 6mm tempered thick glass 6mm per la loro leggerezza sul piano estetico: rinunciano al telaio e rendono dominante il vetro cerniere, in ottone cromato, sono state studiate con una particolare
More informationADDRESS : 5/F., NO NAIYAN RD, JIAOJIANG, TAIZHOU, ZHEJIANG, CHINA. TURN AROUND TIME : 19-Jun-2012 to 25-Jun-2012, 4 working days
TEST REPORT Page : 1 of 7 APPLICANT : KINGDOM TOYS & GIFTS CO., LTD ADDRESS : 5/F., NO.71-2 71-7 NAIYAN RD, JIAOJIANG, U, ZHEJIANG, CHINA U KINGDOM TOYS & GIF SAMPLE DESCRIPTION : WOODEN TOYS ITEM NO.
More informationSede: Via Antica, 24/ S. Giovanni al Nat. UD Tel r.a. Fax SAMPLE N
Report consists of 11 test reports. Defects before testing: one Sample name: RELOAD chair SAMPLE 213402 Overall dimensions: 580 x 560 x 790 (h) mm List performed tests: 1. Safety requirements E 16139:2013+AC:2013
More informationNATIONAL TECHNICAL SYSTEMS V50 BALLISTIC LIMIT TEST
V50 BALLISTIC LIMIT TEST Date Received: 11/17/16 Record No.: HHV16004-1 Via: Hand Carry Test Date: 11/17/16 Returned Via: Hand Carry Customer: Hard Head Veterans Sample Threat Range 4 Manufacturer: Hard
More informationSimulation of Collective Load Data for Integrated Design and Testing of Vehicle Transmissions. Andreas Schmidt, Audi AG, May 22, 2014
Simulation of Collective Load Data for Integrated Design and Testing of Vehicle Transmissions Andreas Schmidt, Audi AG, May 22, 2014 Content Introduction Usage of collective load data in the development
More information210FR. Aluminum medium pressure filter regulator, suitable for compressed air FEATURES. Filter-Regulator for inlet pressure up to 30 bar (435 psi).
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com 210FR Aluminum medium pressure filter regulator, suitable for compressed air FEATURES Filter-Regulator
More informationSafe-Stop TMA (Truck Mounted Attenuator) GENERAL SPECIFICATIONS
Safe-Stop TMA (Truck Mounted Attenuator) GENERAL SPECIFICATIONS I. GENERAL A. All Safe-Stop Truck Mounted Attenuators (Safe-Stop TMA) shall be designed and manufactured by Energy Absorption Systems, Incorporated,
More informationISTRUZIONI DI MONTAGGIO / MOUNTING INSTRUCTIONS
Energon - Regolatore Digitale per Fan Coil Energon - Fan Coil Digital Controller NR9000 ISTRUZIONI DI MONTAGGIO / MOUNTING INSTRUCTIONS APPLICAZIONE ED USO NR9000 è un regolatore digitale per unità terminali
More informationArt Host. Art X Categorie rivestimenti disponibili: A, H Covering categories available: A, H. Tubo Tube Ø16 Tubo Tube Ø16
68 Art. 791 740 740 Art. 793 740X740 69 400 710 400 Categorie rivestimenti disponibili: A, H Covering categories available: A, H 70 - Wow Art. 791, sedute singole con schienale rivestite in finta pelle
More informationFR314ST-FR338ST-FR312ST-FR334ST
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 30 2035 info@idinsertdeal.com www.idinsertdeal.com FR314ST-FR338ST-FR312ST-FR334ST Stainless steel AISI 316L filter regulator for air, gas
More information