TEST REPORT N
|
|
- Laurence Harrington
- 5 years ago
- Views:
Transcription
1 centro ricerche-sviluppo e laboratori prove Date received: Date of issue: ILPO S.P.A. VIA FRIULI OSTERIA GRADE CASTEL SA PIETRO TERME (BO) Report consists of 11 test reports. Defects before testing: one Sample name: KOOL chair Overall dimensions: 580 x 520 x 790 (h) mm List performed tests: 1. on-domestic seating. Safety requirements E 15373: on-domestic seating. Information for use E 15373: Seat and back static load test E 1728: on-domestic seating. Vertical load on back rest E 15373: Seat and back fatigue test E 1728: Seat front edge durability test E 1728: Leg forward static load test E 1728: Leg sideways static load test E 1728: Seat impact test E 1728: Back impact test E 1728: Stability - E 1022:2005 Page 1 of 2
2 Sample weight ot determined Sample name: KOOL chair Side view Rear view Bottom view report relates to the sample submitted for the test and no others. Additions, deletions or alterations are not permitted. This test report must always be Page 2 of 2
3 / 1 Date of test: VIA FRIULI OSTERIA GRADE! CASTEL SA PIETRO TERME (BO)! on-domestic seating. Safety requirements E 15373:2007 on-domestic seating. Safety requirements E 15373: clauses 5.1 and 5.2 Statement cecked Corner and edges in contact with the users: Absence of sharp edges and corners Accessible hollow components: The ends of hollow components are closed or capped Movable and adjustable parts: It shall not possible for any movable and adjustable part of the chair to come operate unintentionally. Connections between parts of the structure: It shall not possible for any load bearing part of the seating to come loose unintentionally Parts wich are lubricated: All the parts wich are lubricated shall be designed to protect users Shear and squeeze points between movable parts 7 mm 18 mm: Shear and squeeze points under influence of powered mechanism Shear and squeeze points during normal use Shear and squeeze points created by the weight of the user during normal movements and actions Yes Yes Movable and adjustable parts not present o Lubricated parts not present Mechanism not present o o Conformity to clauses 5.1 and 5.2 of standard E 15373:2007: YES
4 / 2 Date of test: VIA FRIULI OSTERIA GRADE! CASTEL SA PIETRO TERME (BO)! on-domestic seating. Information for use E 15373:2007 on-domestic seating. Information for use E 15373:2007 clause 7 Statement cecked Information for use in the language of the country in which the chair will be delivered to the end user Italian language Information regarding the intended use Present Assembly instructions, where applicable ot applicable Instruction for the care and the maintenance of the chair Present Information on the choice of castors in relation to the floor surface if the chair is fitted Advice that only trained personnel may replace or repair seat height adjustment components with energy accumulators if the chair is fitted Castors not present Seat height adjustment not present Conformity to clause 7 of standard E 15373:2007: YES
5 / 3 Date of test: VIA FRIULI OSTERIA GRADE! CASTEL SA PIETRO TERME (BO)! Seat and back static load test E 1728:2000 Seat and back static load test, clause Seat load Back force umber of cycles o defects Seat front edge static load, clause Seat load umber of cycles o defects ote: The test has been carried out according to table 1 of E 15373:2007, level 2 - general.
6 / 4 Date of test: VIA FRIULI OSTERIA GRADE! CASTEL SA PIETRO TERME (BO)! on-domestic seating. Vertical load on back rest E 15373:2007 on-domestic seating: vertical static load on back rest - Annex A, clause A.2 E 15373:2007 Seat load Downwards force umber of applications o defects ote: The test has been carried out according to table 1 of E 15373:2007, level 2 - general.
7 / 5 Date of test: VIA FRIULI OSTERIA GRADE! CASTEL SA PIETRO TERME (BO)! Seat and back fatigue test E 1728:2000 Seat and back fatigue test, clause 6.7 Seat force Back force umber of cycles o defects ote: The test has been carried out according to table 1 of E 15373:2007, level 2 - general.
8 / 6 Date of test: VIA FRIULI OSTERIA GRADE! CASTEL SA PIETRO TERME (BO)! Seat front edge durability test E 1728:2000 Seat front edge durability test, clause 6.8 Points of application Seat force umber of cycles 80 mm back from the front edge o defects ote: The test has been carried out according to table 1 of E 15373:2007, level 2 - general.
9 / 7 Date of test: VIA FRIULI OSTERIA GRADE! CASTEL SA PIETRO TERME (BO)! Leg forward static load test E 1728:2000 Leg forward static load test, clause 6.12 Forward horizontal force Balancing seat force umber of cycles o defects ote: The test has been carried out according to table 1 of E 15373:2007, level 2 - general.
10 / 8 Date of test: VIA FRIULI OSTERIA GRADE! CASTEL SA PIETRO TERME (BO)! Leg sideways static load test E 1728:2000 Leg sideways static load test, clause 6.13 Sideways horizontal force Balancing seat force umber of cycles o defects ote: The test has been carried out according to table 1 of E 15373:2007, level 2 - general.
11 / 9 Date of test: VIA FRIULI OSTERIA GRADE! CASTEL SA PIETRO TERME (BO)! Seat impact test E 1728:2000 Seat impact test, clause 6.15 Mass of impactor kg Height of drop mm umber of drops o defects ote: The test has been carried out according to table 1 of E 15373:2007, level 2 - general.
12 / 10 Date of test: VIA FRIULI OSTERIA GRADE! CASTEL SA PIETRO TERME (BO)! Back impact test E 1728:2000 Back impact test, clause 6.16 Angle Mass of impactor kg umber of cycles 48 6,5 10 o defects ote: The test has been carried out according to table 1 of E 15373:2007, level 2 - general.
13 / 11 Date of test: VIA FRIULI OSTERIA GRADE! CASTEL SA PIETRO TERME (BO)! Stability - E 1022:2005 Type of chair: fixed geometry Minimum horizontal force for rearwards overturning of fixed back chair: 169 Forwards overturning Horizontal force : 20 does not overturn Rearwards overturning Fixed back chair Horizontal force Tilting chair in the rearmost position Loading discs on the seat : 169 does not overturn : // Sideways overturning for chairs with arms Horizontal force : // Sideways overturning for chairs without arms Horizontal force : 20 does not overturn Forwards overturning for chairs with footrest Horizontal force : // Test passed
Sede: Via Antica, 24/ S. Giovanni al Nat. UD Tel r.a. Fax SAMPLE N
Report consists of 11 test reports. Defects before testing: one Sample name: RELOAD chair SAMPLE 213402 Overall dimensions: 580 x 560 x 790 (h) mm List performed tests: 1. Safety requirements E 16139:2013+AC:2013
More informationSede: Via Antica, 24/ S. Giovanni al Nat. UD Tel r.a. Fax
Date received: 11/07/14 Date of issue: 02/09/14 CERATOLA S.P.A. VIA GIORGIOE 2-ZOA ID.LE 31037 RAMO DI LORIA (TV) Report consists of 11 test reports. Defects before testing: one Sample name: REVOLUTIO
More informationSede: Via Antica, 24/ S. Giovanni al Nat. UD Tel r.a. Fax SAMPLE N
33048 S. Giovanni al at. UD Date received: 30/04/15 Date of issue: 16/06/15 Report consists of 11 test reports. METALMECCAICA ALBA S.R.L. 31020 SA ZEOE DEGLI EZZELII (TV) Defects before testing: one Sample
More informationSede: Via Antica, 24/ S. Giovanni al Nat. UD Tel r.a. Fax SAMPLE N
Report consists of 7 test reports. CERATOLA S.P.A. VIA GIORGIOE 2-ZOA ID.LE 31037 RAMO DI LORIA (TV) Defects before testing: one Sample name: COZY swivel chair SAMPLE 180511 Overall dimensions: 660 x 660
More informationTEST REPORT N
centro ricerche-sviluppo Date received: 05-10-10 Date of issue: 25-11-10 Report consists of 10 attached sheets. Defects before testing: one Sample name: SHIY 121264 Overall dimensions: 750 x 750 x 1060
More informationSede: Via Antica, 24/ S. Giovanni al Nat. UD Tel r.a. Fax SAMPLE N
Report consists of 9 test reports. ARDI S.P.A. VIA ARSO 4 36072 CHIAMPO (VI) Defects before testing: one Sample name: OMEGA SAMPLE 194871 Overall dimensions: 690 x 1700 x 900 (h) mm List performed tests:
More informationTest Report No.: AJD Date: NOV.05, 2013 Page: 1 of 5
Test Report No.: AJD201307381 Date: NOV.05, 2013 Page: 1 of 5 HR FURNITURE CO., LTD SHANGJIABAO ECONOMICAL DEVELOPMENT ZONE, SHENGFANG TOWN, BAZHOU, HEBEI, CHINA The following sample(s) was / were submitted
More informationContact person Date Reference Page Michael Lindblad F000833F 1 (1) Sustainable Built Environment
issued by an Accredited Testing Laboratory Contact person Michael Lindblad 2015-06-25 5F000833F 1 (1) Sustainable Built Environment +46 10 516 58 58 Michael.Lindblad@sp.se 1002 ISO/IEC 17025 Martela AB
More informationContact person Date Reference Page Michael Lindblad F013838C 1 (1) Sustainable Built Environment
issued by an Accredited Testing Laboratory Contact person Michael Lindblad 2015-09-17 5F013838C 1 (1) Sustainable Built Environment +46 10 516 58 58 Michael.Lindblad@sp.se 1002 ISO/IEC 17025 Johanson Design
More informationContact person Date Reference Page Hans Eriksson F000838G 1 (4) Wood Technology
issued by an Accredited Testing Laboratory Contact person Hans Eriksson 2015-03-26 5F000838G 1 (4) Wood Technology +46 10 516 54 28 hans.eriksson@sp.se 1002 ISO/IEC 17025 Nordic Comfort Products A/S P.O.
More informationPage 1(5) Quality department P.O. Box 22 TEST REPORT 579/16 FIN Nummela Finland
Page 1(5) Product Logic 300 Test requested by Test specimen Test method, Takkatie 1, 00370 Helsinki Seat shell: Polyamide + foam Back rest: Polyamide + foam Arm rest: Polyamide Legs: Steel + aluminium
More informationpage 1/6 EN 16139:2013, test severity level 1 The sample submitted for test fulfils the requirements in above mentioned standards.
page 1/6 and Verification Center Article: requested by: Neolite, armrests sledge Jan Jismyr Material AB Tranås Sweden s are carried out according to standard: Discrepancies: Result and observations: EN
More informationpage 1/5 EN 16139:2013, test severity level 1
page 1/5 and Verification Center Article: requested by: Jan Jismyr Material AB Tranås Sweden s are carried out according to standard: Discrepancies: Result and observations: EN 16139:2013, test severity
More informationInternrapport
page 1/5 and Verification Center Internrapport 17-10182 Article: requested by: Jan Jismyr Materia AB Tranås Sweden s are carried out according to standard: Discrepancies: Result and observations:, test
More informationContact person Date Reference Page Ulf Lemke F015337C 1 (4) Wood Technology
issued by an Accredited Testing Laboratory Contact person Ulf Lemke 2013-08-12 3F015337C 1 (4) Wood Technology +46 10 516 50 32 ulf.lemke@sp.se 1002 ISO/IEC 17025 Johanson Design AB Anders Anderssons väg
More informationpage 1/5 EN 16139:2013, test severity level 1 Manager Kinnarps Test- & verification Center
page 1/5 and Verification Center Article: requested by: Jan Jismyr Materi AB Tranås Sweden s are carried out according to standard: Discrepancies: Result and observations:, test severity level 1 This European
More information: Metta Company : FLTSSP _07. : Swiss Approval Furniture Laboratory. : Elefsis, Attica Greece
Holder Manufacturer : Metta Company : Metta Company Test Item : Office work chair model SAMURAI S-1 Identification : FLTSSP-161118_07 Condition of delivery : Date of delivery : 18/11/2016 Testing laboratory
More informationContact person Date Reference Page Michael Lindblad F025884A 1 (1) Sustainable Built Environment
issued by an Accredited Testing Laboratory Contact person Michael Lindblad 2015-05-09 5F025884A 1 (1) Sustainable Built Environment +46 10 516 58 58 Michael.Lindblad@sp.se Accred. No. 1002 Testing ISO/IEC
More informationContact person Date Reference Page Michael Lindblad F025884B 1 (1) Sustainable Built Environment
issued by an Accredited Testing Laboratory Contact person Michael Lindblad 2015-05-09 5F025884B 1 (1) Sustainable Built Environment +46 10 516 58 58 Michael.Lindblad@sp.se Accred. No. 1002 Testing ISO/IEC
More informationListe der verwendeten Prüfmittel List of used test equipment
rodukte roducts rüfbericht-nr.: 21203523_002 Seite 2 von 12 age 2 of 12 Liste der verwendeten rüfmittel List of used test equipment rüfmittel Test equipment rüfmittel-nr. / ID-Nr. Equipment No. / ID-No.
More informationContact person Date Reference Page Ulf Lemke F027196A 1 (4) Wood Technology
issued by an Accredited Testing Laboratory Contact person Ulf Lemke 2014-01-22 3F027196A 1 (4) Wood Technology +46 10 516 50 32 ulf.lemke@sp.se 1002 ISO/IEC 17025 Nordic Comfort Products A/S P.O. Box 3
More informationContact person Date Reference Page Hans Eriksson F000838D 1 (3) Wood Technology
issued by an Accredited Testing Laboratory Contact person Hans Eriksson 2015-03-26 5F000838D 1 (3) Wood Technology +46 516 54 28 hans.eriksson@sp.se 02 ISO/IEC 17025 Nordic Comfort Products A/S P.O. Box
More informationListe der verwendeten Prüfmittel List of used test equipment
rodukte roducts rüfbericht-nr.: 21254500_001 Seite 2 von 12 age 2 of 12 Liste der verwendeten rüfmittel List of used test equipment rüfmittel Test equipment rüfmittel-nr. / ID-Nr. Equipment No. / ID-No.
More informationLength: 895 mm Width: 1355 mm Height: 705 mm
HAY/Nine United Denmark A/S Havnen 1 DK-8700 Horsens Page 1 of 1 Appendices 3 Initials laha/prni/hbs Test Report Material: Model: Palissade Lounge Sofa also covers Palissade Lounge Chair High and Palissade
More informationType: Office work chair Lab.no.: A. EN :2009 Office furniture - Office work chair - Part 2: Safety requirements.
Labofa Stole A/S Attn.: Finn Pedersen Borgergade 42 DK-4241 Vemmelev Order no. 434372 Appendices 3 Initials laha/prni/hbs Report Material: Model: Five star office chairs from the series EGO Plus, EGO BASIS,
More informationType: Office work chair Lab.no.: Depth: 650 mm Width: 710 mm Height: 1345 mm Weight: 18,8 kg. EN :2009 and EN :2009.
Lanab Design Aktiebolag Attn.: Åke Jansson Lerbacksgatan 7 SE-571 38 NÄSSJÖ Order no. 515628 Appendices 3 Initials laha/prni/hbs Report Material: Model: LD6340/LD6240 Type: Office work chair Lab.no.: 515628-2
More informationTest Report No.: AJHL FT Date: JUN.02, 2016 Page 1 of 5
Test Report No.: AJHL1605004946FT Date: JUN.02, 2016 Page 1 of 5 The following sample(s) was / were submitted and identified on behalf of the client as: Sample Description OFFICE CHAIR Type/Style K-106AH
More informationTEST REPORT FOR: Product Design Group Inc. Elevation Manual Wheelchair 115 kg, 253 lb
TEST REPORT FOR: Product Design Group Inc. Elevation Manual Wheelchair 115 kg, 253 lb REFERENCED DOCUMENTS ISO7176-1:1999, ISO7176-3:2003, ISO7176-5:2008, ISO7176-7:1998, ISO7176-8:1998, ISO7176-13:1989
More informationTEST REPORT FOR: Product Design Group Fuze T50 Manual Wheelchair (204 kg / 450 lb)
TEST REPORT FOR: Product Design Group Fuze T50 Manual Wheelchair (204 kg / 450 lb) REFERENCED DOCUMENTS ISO7176-1:1999, ISO7176-3:2003, ISO7176-5:2008 ISO7176-7:1998, ISO7178-8:1998, ISO7176-13:1989, ISO7176-15:1996,
More informationTEST REPORT FOR: Product Design Group Inc. Stellar Tilt Manual Wheelchair to 114kg
TEST REPORT FOR: Product Design Group Inc. Stellar Tilt Manual Wheelchair to 114kg LABORATORY REFERENCE 492558 30th June 2016 Page 1 of 15 REFERENCED DOCUMENTS IN THIS REPORT: AS/NZS 3695.1:2011 Part 1:
More informationTest Report No.: SDHL FT Date: May 15, 2017 Page 1 of 15
Test Report No.: SDHL1703004564FT Date: May 15, 2017 Page 1 of 15 HERMAN MILLER NO.488, QIAN TANG JIANG RD., BEILUN, NINGBO, ZHEJIANG, 315800, P.R. CHINA The following sample(s) was / were submitted and
More informationFEDERAL STANDARD PERFORMANCE TEST METHOD FOR INTENSIVE USE CHAIRS
METRIC November 20, 2007 SUPERSEDING FNEW-83-269E October 31, 1989 FEDERAL STANDARD PERFORMANCE TEST METHOD FOR INTENSIVE USE CHAIRS The General Services Administration has authorized the use of this federal
More informationTEST REPORT FOR: Product Design Group Inc. Dory tilting manual wheelchair, 114 kg / 250 lbs
TEST REPORT FOR: Product Design Group Inc. Dory tilting manual wheelchair, 114 kg / 250 lbs LABORATORY REFERENCE 492619-3 This report supersedes report # 492619-2 dated 17 th May 2017 24 th May 2017 Page
More informationNovitaTech Engineering
NovitaTech Engineering 490869 TEST REPORT FOR PDG Product Design Group Eclipse 600 MANUAL WHEELCHAIR TEST DOCUMENTS AS3695:1992, AS3696-1:1990, AS 3696-3:1990, AS 3696-5:1989, AS 3696-8:1998, ISO 7176-7:1996
More informationDavid Fagan, Mobility Manager Paragon Mobility Pty Ltd 3/10 Tapnor Crescent, Brendale, Queensland th December, 2011.
David Fagan, Mobility Manager Paragon Mobility Pty Ltd 3/10 Tapnor Crescent, Brendale, Queensland. 4500 15 th December, 2011 Dear David, Reference: testing the Catalyst Spark manual wheelchair to 77 kg
More informationISO (revision) Walking Aids manipulated by both arms Requirements and test methods Part 2: Rollators
ISO/TC 173 N XXX (ISO/TC 173/WG 1 - N 269) Date: 2003-10--- ISO/CD 11199-2 Secretariat: SIS Deleted: ISO Formatted: English(U.K.), Deleted: 173 Formatted: English(U.K.), Deleted: SIS Formatted: Font: 10
More informationTESTING REPORT. ROLLATORS - ISO classification in accordance with the INTERNATIONAL STANDARD ISO :2005. Testing No. 07.
Danish Centre for Assistive Technology TESTING REPORT ROLLATORS - ISO classification 12.06.06 in accordance with the INTERNATIONAL STANDARD ISO 11199-2:2005 Testing No. 07.44A This page is page 1 of a
More informationCommon position by FR and CEMA on mechanical couplings for towed vehicles 28/9/2015
Common position by FR and CEMA on mechanical couplings for towed vehicles 28/9/2015 ANNEX XXXIV Requirements on mechanical couplings 1. Definitions For the purposes of this Annex: 1.1. Mechanical coupling
More informationInformal Document N 20 (30th GRSP, 3-6 December 2001, agenda item 1.4) Insert in the "CONTENTS" the headlines of new annexes 10 & 11 to read:
30 November 2001 Informal Document N 20 (30th GRSP, 3-6 December 2001, agenda item 1.4) Draft Amendments To Regulation No. 17: (Strength of Seats) page ii Insert in the "CONTENTS" the headlines of new
More informationDirections for use VIBRO FLEX 7400
Directions for use VIBRO FLEX 7400 Contents Introduction... 3 Identification... 3 Explanation of symbols... 4 Safety... 5 General safety advice... 5 Coupling and uncoupling... 5 Three-point hitch or linkage...
More informationThe Esteem Steel Self Propel Wheelchair Instructions
The Page 1 Instructions for Steel Self propel Wheelchair Fold down back lever Arm release pull Fold away armrest lever Quick release wheels Brake lever Footrest Pegs Footrest adjustment bolt Footrest It
More informationOperators manual CIELLO. Office swivel chair for VDU-workstations and desk-workstations
Operators manual CIELLO Office swivel chair for VDU-workstations and desk-workstations CIELLO Operating System whilst seated left whilst seated right Air-Support Depth-adjustment Body weight adjustment
More informationTest Report For: EMECO INDUSTRIES INC Bar Stool
4700 Broadmoor SE, Suite 200 Kentwood, MI 49512 Telephone: 616-- 656-- 7401 Facsimile: 616-- 656-- 2022 www.intertek-- etlsemko.com EMECO INDUSTRIES INC P.O. No. N / A Page 1 of 18 Test Report For: EMECO
More informationMöbler Stolar och bord för skol- och utbildningsmiljö Del 2: Säkerhetskrav och provningsmetoder
SVESK STADARD SS-E 1729-2:2006 Fastställd 2006-07-21 Utgåva 1 Möbler Stolar och bord för skol- och utbildningsmiljö Del 2: Säkerhetskrav och provningsmetoder Furniture Chairs and tables for educational
More informationERGOHUMAN ADVANCED ENGINEERING
1 1 3 ADVANCED ENGINEERING The Ergohuman Plus takes our top selling chair to new levels, with more aluminium detailing, a seat tilt function and an organically formed base, the Ergohuman Plus is the ideal
More informationSeatpan and backrest angles can be adjusted independently, usually with two separate levers
Feature Explanation Considerations Standard Features & Options Synchronous Mechanism Relationship between seatpan and backrest is linked so that the angles adjust in a fixed ratio. Typically, the backrest
More informationProposal for 10 series of amendments to Regulation No. 17 (Strength of seat)
Submitted by the expert from CLEPA Informal document GRSP-64-25 (64 th GRSP, 11-14 December 2018, agenda item 9) Proposal for 10 series of amendments to Regulation No. 17 (Strength of seat) The text reproduced
More informationOutdoor furniture Seating and tables for camping, domestic and contract use
BRITISH STANDARD BS EN 581-2:2009 Outdoor furniture Seating and tables for camping, domestic and contract use Part 2: Mechanical safety requirements and test methods for seating ICS 97.140; 97.200.30 NO
More informationContact person Date Reference Page Mikael Videby P08110A 1 (6) SP Structural and Solid Mechanics
issued by an Accredited Testing Laboratory Contact person Mikael Videby 2015-11-13 5P08110A 1 (6) SP Structural and Solid Mechanics +46 10 516 50 36 Mikael.Videby@sp.se Accred. No. 1002 Testing ISO/IEC
More information2.0 TEST RECORDS - All records of inspection and tests shall be kept in suitable forms approved by the Bureau of Indian Standard (BIS).
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PROTECTIVE HELMETS FOR MOTOR CYCLE RIDERS ACCORDING TO IS 4151:1993 1.0 LABORATORY A laboratory shall be maintained which shall be suitably equipped
More informationWallaby Wheelchair. Item #s: WB1200-2GFR, WB1400-2GJB. Accessories WB ELR - Elevating Leg Rests WB Headrest Extension STDS833N - Anti-Tippers
by Wallaby Wheelchair Item #s: WB1200-2GFR, WB1400-2GJB Accessories WB ELR - Elevating Leg Rests WB 8021 - Headrest Extension STDS833N - Anti-Tippers EU Authorized Representative Drive Medical LTD Introduction
More informationSWISS INTERNATIONAL AIR LINES LTD.
Gerald Simonds Healthcare Ltd. 9 March Place Gatehouse Way Aylesbury Bucks HP19 8UA TECHNICAL INFORMATION MANUAL WITH ILLUSTRATED PARTS LIST FOR THE ON-BOARD WHEELCHAIR Part No. 2520502SWR For: SWISS INTERNATIONAL
More informationAPPLICANT: EMECO DATE: Mar 10, ELM AVE HANOVER, PA, USA
APPLICANT: EMECO DATE: Mar 10, 2011 805 ELM AVE HANOVER, PA, 17331 USA ATTN: MAGNUS BREITLING THIS IS TO SUPERSEDE REPORT NO. SZHH00526912 DATED SEP 20, 2010 SAMPLE DESCRIPTION: TWO (2) PIECES OF SUBMITTED
More informationStorage Basket and Clamp Vertical Oxy Holder and Clamp Pogo IV Pole / Stand - Heavy Base Provita Smart IV Stand IV Handle and Clamp
This range of equipment is engineered for strength and durability to withstand continuous use year after year. A blend of different materials and finishes are used throughout the range. All products are
More informationTest Report No.: SHHG MD Date: FEB. 26, 2016 Page: 1 of 17
Report No.: SHHG1508032551MD Date: FEB. 26, 2016 Page: 1 of 17 GOLDEN MOTOR TECHNOLOGY CO., LTD. BLOCK 8,MODERN INDUSTRIAL CENTER,801 CHANGWU MIDDLE ROAD, CHANGZHOU, JIANGSU, 213164, CHINA The following
More informationVolume 1 Series 2200 Specification for Road Works. Clause Title Page
PARAPETS Contents Clause Title Page 2201 General... 2 2202 Vehicle... 2 2203 Anchorages and Attachment Systems for Vehicle... 2 2204 Amendments and Additions to BS 6779... 3 2205 Protection Against Corrosion...
More informationANCAP Test Protocol. Whiplash Protection (rear) v1.0
ANCAP Test Protocol. Whiplash Protection (rear) v1.0 JANUARY 2018 PREFACE During the test preparation, vehicle manufacturers are encouraged to liaise with ANCAP and to observe the way cars are set up for
More informationASSIST & TRANSIT. osd USER MANUAL TABLE OF CONTENTS
osd ASSIST & TRANSIT USER MANUAL TABLE OF CONTENTS 1. Key Specifications 2. List of Components 3. Assembly & Use 4. Troubleshooting 5. Care & Maintenance 6. Warnings 7. Warranty 8. Compliance 9. Service
More informationEconomic and Social Council
United Nations Economic and Social Council ECE/TRANS/WP.29/2017/59 Distr.: General 5 April 2017 Original: English Economic Commission for Europe Inland Transport Committee World Forum for Harmonization
More informationADJUSTABLE UNIVERSAL GOLD MEDAL SAILING SEAT
ADJUSTABLE UNIVERSAL GOLD MEDAL SAILING SEAT Andrew Sulik Timothy Slattery Marion Paredes Pages Derek Topper Detailed Design Review 2/8/13, 3:30 pm 2 Agenda Meeting Purpose Overview of Project Review Customer
More informationUSER MANUAL PRODUCT CODE: WC CareCo (UK) Ltd, Hubert Road, Brentwood, Essex, CM14 4JE PAGE 1
by USER MANUAL PRODUCT CODE: WC01059 CareCo (UK) Ltd, Hubert Road, Brentwood, Essex, CM14 4JE PAGE 1 CONTENTS 1. INTRODUCTION 2. IDENTIFICATION OF PARTS 3. SAFETY REGULATIONS 4. SAFETY WARNINGS 5. USER
More information7 The revised IS 8034:2002 and revised STI be implemented w.e.f. 1 Feb 2005.
BUREAU OF INDIAN STANDARDS (CENTRAL MARKS DEPARTMENT-III) Our Ref: CMD-III/16:8034 25 Oct 2004 Subject: Implementation of revised IS 8034:2002 Submersible Pump Sets and revised STI (Doc:STI/8034/5 ) IS
More informationASSIST & TRANSIT. osd USER MANUAL TABLE OF CONTENTS
osd ASSIST & TRANSIT USER MANUAL TABLE OF CONTENTS 1. Key Specifications 2. List of Components 3. Assembly & Use 4. Troubleshooting 5. Care & Maintenance 6. Warnings 7. Warranty 8. Compliance. Service
More informationUSER MANUAL. CareCo (UK) Ltd, Hubert Road, Brentwood, Essex, CM14 4JE PAGE 1 PRODUCT CODE WC01060.BLU
by USER MANUAL PRODUCT CODE WC01060.BLU PAGE 1 CareCo (UK) Ltd, Hubert Road, Brentwood, Essex, CM14 4JE INFORMATION Thank you for purchasing a wheelchair from I-GO. This I-GO wheelchair has been designed
More informationEconomic and Social Council
United Nations Economic and Social Council ECE/TRANS/WP.29/2013/75 Distr.: General 15 August 2013 Original: English Economic Commission for Europe Inland Transport Committee World Forum for Harmonization
More informationPersonalised comfort: affordable luxury. Enjoy
Personalised comfort: affordable luxury Enjoy Enjoy The Enjoy range brings extraordinary economy to luxury seating. Sharing many of the features of the top-range Ergohuman models, the Enjoy office chair
More informationTest Report No.: SDHGR FM Date: Jun.08, 2012 Page 1 of 3
Test Report No.: SDHGR120501002FM Date: Jun.08, 2012 Page 1 of 3 HONGGE (GUANGZHOU) PAPER CO., LTD BUILDING 1, HE TAI INDUSTRY ZONE, HE TAI ROAD NO.2, HE BIAN, JIA HE TOWN, BAI YUN DISTRICT, GUANGZHOU.
More informationEnigma Travel Chair and Lightweight Aluminium Wheelchair Owner s Handbook
Enigma Travel Chair and Lightweight Aluminium Wheelchair Owner s Handbook Please read this manual before operation for maintenance instructions and safe usage of this wheelchair. Introduction The Enigma
More informationLIGHTWEIGHT TRANSPORT CHAIR ECTR 01 Assembly and Operating Instructions
LIGHTWEIGHT TRANSPORT CHAIR ECTR 01 Assembly and Operating Instructions Page 1 of 12 INTRODUCTION Thank you for purchasing LIGHTWEIGHT TRANSPORT CHAIR. This model has been designed to help you gain independence
More informationREARWARD-FACING USER MANUAL ECE R GROUP WEIGHT AGE 0+/ kg 6m-4y
REARWARD-FACING USER MANUAL ECE R44 04 GROUP WEIGHT AGE 0+/1 0-18 kg 6m-4y 1 Thank you for choosing BeSafe izi Kid ISOfix. BeSafe has developed this seat with much care, to protect your child during the
More informationEXTRACT of chapter XXXIV coupling devices (version of ) ANNEX XXXIV Requirements on mechanical couplings
EXTRACT of chapter XXXIV coupling devices (version of 18.09.2013) ANNEX XXXIV Requirements on mechanical couplings Definitions specific to this Annex Mechanical coupling between tractor and towed vehicle
More informationInstruction manual. RP800 - HYDRAULIC actuator, load 150Kg. RP815 - LINAK actuator, load 150Kg
HYDRAULIC patient lift RP800 - HYDRAULIC actuator, load 150Kg MA RP800_805_806_ 807_810_811_815 02 A_12-2010 Electric patient lifts RP805 - LINAK actuator, load 150Kg RP806 - HIWIN actuator, load 150Kg
More informationMadison. Key features at a glance: Additional options:
Madison Madison The Madison Porter chair comes with a Dual Tilt in Space rise recline mechanism maximising the postural and pressure management options for the carer with independent backrest and leg
More informationENIGMA SUPER DELUXE WHEELCHAIR
1. CONTENTS 1. Contents 2. Introduction 3. Parts Description 4. Adjustment Features 5. Folding Back Mechanism 6. Disassembly and Folding 7. Using the Stepper Tube 8. Brake Operation 9. Lap Belt Operation
More informationSB2 TubBuddy Owners Manual. elimination through innovation
SB2 TubBuddy Owners Manual elimination through innovation contents Exploded Parts... 3 Parts List... 4 Securing Clip Sizes... 4 TubBuddy Assembly... 5 TubBuddy Setup... 12 TubBuddy Operation... 17 Cleaning
More informationVoyager Travel Chair
Voyager Travel Chair Product Code: WC02056 OWNERS HANDBOOK www.careco.co.uk Your CareCo Voyager Travel Chair 1 2 5 4 3 List of Parts 1. Attendant push handles 2. Padded armrests 3. Swing away footrests
More informationHardcoat Full Tilt Windshield
Hardcoat Full Tilt Windshield For Can-Am Defender P/N 3015 ASSEMBLY / OWNERS MANUAL Before you begin, please read and understand these instructions. Also review the box contents to ensure all parts are
More informationRe.Formance Line INSTRUCTION MANUAL 1703
Re.Formance Line INSTRUCTION MANUAL 1703 320.8779.02 / 1703 Re.Formance Line Table of contents 1. Overview... 3 1.1 Re.Forma Hi.... 3 1.2 Re.Forma... 3 1.3 Re.Forma Lite.... 3 2. Notes... 4 2.1 Warranty
More informationERGOHUMAN ADVANCED ENGINEERING
1 ERGOHUMAN 2 2 3 ADVANCED ENGINEERING The Ergohuman chair is a perfect fusion of art and science, with flex zones that ensure constant support of back and lumbar, multi-dimensional adjustable arm rests
More informationADJUSTING THE GANG ANGLE
ADJUSTING THE GANG ANGLE 1. Raise the machine until the discs are clear of the ground. 2. Set the diverter valve ( Fig. 1) to the angle position 3. Remove the appropriate angling pin (Fig 2 ) and replace
More informationcontents parts description 1/2 FOLD MECHANISM
contents 1. Contents 2. Introduction 3. Parts Description 4. Adjustment Features i. Rear Wheels ii. Upholstery Tension iii. Brake Adjustments iv. Leg Rest Adjustment 5. Folding Back Mechanism 6. Disassembly
More informationGeneral-Purpose Office Chairs - Tests
Canvass Draft The Industry Voice for Workplace Solutions Proposed American National Standard for Office Furniture General-Purpose Office Chairs - Tests 17Nov09 Sponsor BIFMA International 678 Front Avenue
More informationTITLE: SPECIFICATION FOR BENCH VICE & BENCH GRINDER TABLE OF CONTENTS. 0.1 Circulation List. 0.2 Amendment Record
Page 1 of 10 TABLE OF CONTENTS 0.1 Circulation List 0.2 Amendment Record FOREWORD 1. SCOPE 2. REFERENCES 3. TERMS AND DEFINITIONS 4. REQUIREMENTS 5. TESTS AND INSPECTION 6. MARKING AND PACKING 7. DEMONSTRATION
More informationRead all instructions carefully & check all components are present before discarding packing materials.
Read all instructions carefully & check all components are present before discarding packing materials. Assembly Procedure Assembly Procedure... 1 Identify Mount Type... 1 Identify the Parts... 1 Frame
More informationSTAINLESS STEEL FURNITURE
STAINLESS STEEL FURNITURE MORE THAN 2500 PROJECTS ALL OVER THE WORLD A whole world of technical excellence ABOUT OUR COMPANY G. SAMARAS S.A. is an international manufacturing company located in Thessaloniki,
More informationCOBRA Indoor base with gas pressure spring and 45 tilt function user manual
COBRA Indoor base with gas pressure spring and 45 tilt function user manual - Partnering together to mobilise kids User manual for COBRA indoor base with gas pressure spring and 45 tilt Index 1 Common
More informationDate of hosting on website: 26 th October 2017 Last date for comments: 25 th November 2017
Date of hosting on website: 26 th October 2017 Last date for comments: 25 th November 2017 CHECK LIST FOR PREPARING AUTOMOTIVE INDUSTRY STANDARD Draft AIS-146/D0 : Requirements applying to stands fitted
More informationTest specification : EN71 - Part1: Mechanical and Physical Properties Excluding Clause 7.1 Excluding Labeling Requirement of Clause
1. EN71 - Part1: Mechanical and Physical Properties Test specification : EN71 - Part1: Mechanical and Physical Properties Excluding Clause 7.1 Excluding Labeling Requirement of Clause Test method : EN71-1:
More informationAccessories and workbenches
Permanent contact The permanent-contact follows the movements of the body and enables the natural stressing and relieving of different muscle and spinal areas. Synchronous mechanism The user-friendly synchronous
More informationFlorien II User Instructions
Florien II User Instructions Important: Read carefully. Retain for future reference Contents June 2017 Issue 4 1 Introduction to the Florien II Chair 1.1 What is the Florien II Chair? 1.2 Why is there
More informationAston Shower Commode Chair Owner s Handbook
Aston Shower Commode Chair Owner s Handbook Aston Shower Commode (CWC003) Page 1 of 15 Introduction Aston Shower Commode Chair These instructions aid the user and/or carer about the safe and efficient
More informationSG Standard for Board Type Riding Gear with Wheels
SG Standard for Board Type Riding Gear with Wheels 1. Purpose The purposes of this standard are to set requirements for the quality of safety of board type riding gear with wheels and for the prevention
More informationACTS ADOPTED BY BODIES CREATED BY INTERNATIONAL AGREEMENTS
15.6.2018 L 153/179 ACTS ADOPTED BY BODIES CREATED BY INTERNATIONAL AGREEMTS Only the original UN/ECE texts have legal effect under international public law. The status and date of entry into force of
More informationShort Test protocol for for attendant operated stair-climbing devices
Short Test protocol for for attendant operated stair-climbing devices client: Ulrich Alber GmbH Vor dem Weißen Stein 21 D-72461 Albstadt Manufacturing location: Ulrich Alber GmbH Vor dem Weißen Stein 21
More informationExpedition Wheelchair.
Expedition Wheelchair www.drivedevilbiss.co.uk Expedition Wheelchair Owner s Handbook (Page 1) Contents 1. Contents 2. Introduction 3. Parts Description 4. Leg Rest Operation 5. Folding Back Mechanism
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. UL 2528 Cathy Ln Jasper, IN Brian Truelove Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 UL 2528 Cathy Ln Jasper, IN 47546 Brian Truelove Phone: 812 556 5094 MECHANICAL Valid To: July 31, 2018 Certificate Number: 2709.03 In recognition of the successful
More informationAluLite. Travel Chair. OWNERS HANDBOOK. Product Code: WC02048
AluLite Travel Chair Product Code: WC02048 OWNERS HANDBOOK www.careco.co.uk Your CareCo AluLite Travel Chair 1 2 3 4 6 5 9 7 8 List of Parts 1. Push Handle 2. Half-Folding Back Mechanism 3. Arm-rest 4.
More informationAston Shower Commode Chair Owner s Handbook
Aston Shower Commode Chair Owner s Handbook Aston Shower Commode (CWC003) Page 1 of 12 Introduction Aston Shower Commode Chair These instructions aid the user and/or carer about the safe and efficient
More informationVolume-III : Section-I 370 Technical Specifications
Volume-III : Section-I 370 TECHNICAL SPECIFICATION-PIERCING INSULATOR 5.1 Insulation Piercing Connectors (IPC) 5.1.1 Insulation Piercing Connectors (IPC) are used for making Tee/Tap-off/Service connectors
More informationLG Alert TM Helping Drivers Operate Safely. LG Alert Lateral Acceleration Indicator User / Installation Manual
INTRODUCTION US Pat. No. 6,130,608 The is intended for use as an early alert system to assist drivers in recognizing when they are exceeding set maximum maneuvering limits of the vehicle. The device monitors
More information