L12MD L38MD. Modular oil fog lubricators, suitable for compressed air FEATURES. Oil fog lubricator for inlet pressure up to 30 bar (435 psi).
|
|
- Stephen Montgomery
- 6 years ago
- Views:
Transcription
1 Strada dei Boschi, Villasanta (MB) Italia tel L12MD L38MD Modular oil fog lubricators, suitable for compressed air FEATURES Oil fog lubricator for inlet pressure up to 30 bar (435 psi). Inlet and outlet port connections G 1/2 F and G 3/8 F in the body. Modular design to couple with same series: filter, regulator or filter-regulator. Holes for wall mounting. The lubricator add oil fog to the air stream that flows inside, is installed upstream, of air operated tools and equipment. The oil flow is proportional to the air flow, by increasing the air flow the oil flow also increases maintaining the right proportion between air and oil. Available the ATEX version. Brand II2GDcIICX. For use in potentially explosive atmospheres zones: 1, 21, 2, 22 (not for mines and zone 0). The product complies with the directive 97/23/CE PED. Available units composed of: Filter-Regulator + Lubricator.
2 SPECIFICATIONS Oil lubricator weight: ~0.62 kg / ~1.37 lb Standard version operating temperature: -10 C +50 C (+14 F +122 F) Degree of protection: IP25 Bowl capacity: 180 cc (6 US fl oz) The oil rate can be adjusted by a knob, or a screw for 30 bar version, on the top of the lubricator; turn clockwise to reduce the oil rate, anticlockwise to increase. It is recommended to use an oil with a viscosity less than ISO VG 22 (3 E). Oil level display for inlet pressure up to 16 bar. A drop display shows the drops of oil that drip into the air stream, only for inlet pressure up to 16 bar. MATERIALS Body and bowl: cast aluminium Knob: PA 6.6 Transparent drop-display and oil level display: CAB Diaphragm: PUR O-Ring: NBR SPARE PARTS Complete kit: o-ring, balls and diaphragm Oil level display: C Complete sight-feed dome: M51201 Copyright ID Insert Deal S.r.l. - All rights reserved 2
3 available model types Lubrificatori Lubricators Lubrificatori per media pressione corpo in lega di zinco, idonei per aria compressa Lubricators for medium pressure with body of zinc alloy, suitable for compressed air Corpo e tazza da fusione in lega d'alluminio. Struttura modulare Cast body and bowl of aluminium. Modular execution TYPE PS bar CONNECTION IN/OUT BOWL 180 cc DROP CONTROL CODE MEDIUM L 12 MD L 12 MD 16 G 1/2-F Metal Trasp 312#P Aria L 38 MD L 38 MD 16 G 3/8-F Metal Trasp 312#L Aria Metal = Tazza metallica / Metal bowl Trasp = Cupolino trasparente / Trasparent drop control ATTACCHI DIVERSI DA STANDARD / CONNECTION DIFFERENT FROM STANDARD Attacchi entrata/uscita NPT / Inlet/outlet connections NPT ESECUZIONI DIVERSE DA STANDARD / EXECUTIONS DIFFERENT FROM STANDARD PS max 20 bar con cupolino in ottone e tazza senza visualizzatore / PS max 20 bar with drop controller of brass and bowl without level gauge Stampigliatura su specifica del cliente / Not standard branding ACCESSORI / ACCESSORIES Visualizzatore tazza C / Level visual sight for bowl C Cupolino per lubrificatore in plastica trasparente M51201 / Drop-controller in trasparent plastic for lubricators Copyright ID Insert Deal S.r.l. - All rights reserved 3
4 generating the product code lubrificatori modulari LL AA BB C DD AA Attacchi / Connections H0 L12MD 1/2"NPT-F L0 L38MD G 3/8-F P0 L12MD G 1/2-F W0 L38MD 3/8"NPT-F BB Tazza + cupolino / Bowl + dome 06 Tazza LL - 16 bar - cup trasparente C Marchiato / Marked I ID Z Dir ATEX 94/9 CE DD Accessori / Accessories 00 Nessun accessorio CODE COMPOSITION EXAMPLE 312# L0 06 I #: MD oil lubricator L0: Connection G 3/8 F 06: Transparent drop display and oil level display, PS=16 bar (232 psi) I: Insert Deal 00: No accessories Copyright ID Insert Deal S.r.l. - All rights reserved 4
5 technical drawings (all dimensions in mm) TYPE L12MD 1/2" GF L38MD 3/8" GF L12MD 1/2" NPTF L38MD 3/8" NPTF IN/OUT G 1/2-F G 3/8-F 1/2"NPT-F 3/8"NPT-F TYPE H NOTE L12 MD/L38 MD PS 16 bar ~215 - L12 MD/L38 MD PS 30 bar ~181 NO LEVEL/DROP DISPLAY ADJUSTING KNOB FILLING CAP DROP DISPLAY Ø5,5 137 IN 17 OUT 215 BOWL CAPACITY 0.18 LITRE OIL LEVEL DISPLAY Copyright ID Insert Deal S.r.l. - All rights reserved 5
6 ID Insert Deal Srl Strada dei Boschi, Villasanta (MB) Italia tel ID Insert Deal si riserva il diritto di cambiare le specifiche del prodotto senza preavviso. ID Insert Deal reserves the right to change and/or modify product specifications without prior notice. Insert Deal non si assume alcuna responsabilità per la scelta, uso e manutenzione di qualsiasi prodotto. La responsabilità per l idonea scelta, uso e manutenzione di qualsiasi prodotto ID rimane interamente a carico dell acquirente. Insert Deal does not assume responsibility for selection, use and maintenance of any products. Responsibility for proper selection, use and maintenance of any ID products remains entirely to the purchaser. Riproduzione vietata. Tutti i diritti riservati; nessuna parte del presente documento può essere riprodotta senza autorizzazione di ID Insert Deal Srl. Reproduction forbidden. All rights reserved; the hereby document can t be reproduced, also partially, without the authorization of ID Insert Deal Srl. 2^S L12MD-L38MD_IT_00 Azienda con sistema di gestione qualità certificato. certificato N Company with certificated quality management system. certificate N Copyright ID Insert Deal S.r.l. - All rights reserved 6
F14MD F18MD. Modular filters, suitable for compressed air FEATURES. Filter for inlet pressure up to 30 bar (435 psi).
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com F14MD F18MD Modular filters, suitable for compressed air FEATURES Filter for inlet pressure
More informationFR14MD FR18MD. Modular filter-regulators, suitable for compressed air. FEATURES Filter-regulator for inlet pressure up to 30 bar (435 psi).
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 30 2035 info@idinsertdeal.com www.idinsertdeal.com FR14MD FR18MD Modular filter-regulators, suitable for compressed air FEATURES Filter-regulator
More informationFRL12MD FRL38MD. Group filter + regulator + oil fog lubricator, made of aluminium, suitable for compressed air FEATURES
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com FRL12MD FRL38MD Groups filter + regulator + oil fog lubricator made of aluminium, suitable
More informationMedium pressure relief valve AISI 316L Stainless steel AISI 316L relief valves, suitable for compressed air, gas and liquid
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 30 2035 info@idinsertdeal.com www.idinsertdeal.com Medium pressure relief valve AISI 316L Stainless steel AISI 316L relief valves, suitable
More information210FR. Aluminum medium pressure filter regulator, suitable for compressed air FEATURES. Filter-Regulator for inlet pressure up to 30 bar (435 psi).
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com 210FR Aluminum medium pressure filter regulator, suitable for compressed air FEATURES Filter-Regulator
More informationFR314ST-FR338ST-FR312ST-FR334ST
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 30 2035 info@idinsertdeal.com www.idinsertdeal.com FR314ST-FR338ST-FR312ST-FR334ST Stainless steel AISI 316L filter regulator for air, gas
More information210FR. Aluminum medium pressure filter regulator, suitable for compressed air FEATURES. Filter-Regulator for inlet pressure up to 30 bar (435 psi).
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com 210FR Aluminum medium pressure filter regulator, suitable for compressed air FEATURES Filter-Regulator
More informationR3123. Stainless steel AISI 316L pressure regulator, for compressed air, gas and liquid FEATURES
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com R3123 Stainless steel AISI 316L pressure regulator, for compressed air, gas and liquid
More informationMedium pressure relief valve AISI 316L Stainless steel AISI 316L relief valves, suitable for compressed air, gas and liquid
Medium pressure relief valve AISI 316L Stainless steel AISI 316L relief valves, suitable for compressed air, gas and liquid FEATURES Relief valve for pressure up to 50 bar (725 psi). Inlet and outlet connections:
More informationR Stainless steel AISI 316L pressure regulator for laboratory use FEATURES. Pressure regulator for inlet pressure up to 20 bar (290 psi).
R32010 Stainless steel AISI 316L pressure regulator for laboratory use FEATURES Pressure regulator for inlet pressure up to 20 bar (290 psi). Inlet connection suitable for ID Insert Deal Presa Universale,
More informationvalvole 16 mm ad azionamento pneumatico
valvole 6 mm ad azionamento pneumatico - 6 mm Valvole a spola 5/ con attacchi filettati G/8 (scarichi M5) 5/ spool valves with G/8 threaded ports (M5 exhaust ports) Spessore della valvola: 6 mm Valve thickness:
More informationPASSASPINA E VASCHETTE CANCELLERIA CABLE HOLDERS AND STATIONERY TRAYS
S E Z I O N E 0-2 0 1 7 COLORI/FINITURE STANDARD STANDARD COLOURS/FINISHINGS COLORE NERO cod. 09004 BLACK Colour 09004 COLORE ANTRACITE cod. 07016 ANTHRACYTE Colour 07016 art./09004 (34/09004) COLORE GRIGIO
More informationIP 54 INDIRECT ELECTRIC BOILING PAN ELECTRIC TILTING PENTOLA ELETTRICA INDIRETTA RIBALTAMENTO ELETTRICO PTEM-40 CATERING EQUIPMENT
PENTOLA ELETTRICA INDIRETTA RIBALTAMENTO ELETTRICO PTEM-40 INDIRECT ELECTRIC BOILING PAN COSTRUZIONE ESTREMAMENTE ROBUSTA GRADO DI PROTEZIONE IP54 RISCALDAMENTO INDIRETTO CON INTERCAPEDINE RIBALTAMENTO
More informationTabella generale Carburo di tungsteno Ordering guide Tungsten carbide
Tabella generale Carburo di tungsteno Ordering guide Tungsten carbide 2 Nr. di giri massimo ammissibile/maximum permissible speed a = ) 100 giri al min. 1 /rpm b = ) 500 giri al min. 1 /rpm c = ) 800 giri
More informationIP 54 INDIRECT ELECTRONIC BOILING PAN PENTOLE ELETTRONICHE INDIRETTE PEIF-40 PEIF-50 CATERING EQUIPMENT
PENTOLE ELETTRONICHE INDIRETTE PEIF-40 PEIF-50 INDIRECT ELECTRONIC BOILING PAN IP 54 COSTRUZIONE ESTREMAMENTE ROBUSTA GRADO DI PROTEZIONE IP54 COSTRUZIONE IN ACCIAIO INOX AISI 304 ECCELLENTE COIBENTAZIONE
More informationTabella generale Carburo di tungsteno Ordering guide Tungsten carbide
Tabella generale Carburo di tungsteno Ordering guide Tungsten carbide 2 Nr. di giri massimo ammissibile/maximum permissible speed a = ) 100 giri al min. 1 /rpm b = ) 500 giri al min. 1 /rpm c = ) 800 giri
More informationTabella generale Diamantate Ordering guide Diamond
Tabella generale Diamantate Ordering guide Diamond 2 Nr. di giri massimo ammissibile/maximum permissible speed a = ) 100 giri al min. 1 /rpm b = ) 500 giri al min. 1 /rpm c = ) 800 giri al min. 1 /rpm
More informationvalvole ad azionamento pneumatico
Valvole a spola /-5/-5/ con attacchi filettati G/8 -G/4 /-5/-5/ spool valves with G/8 -G/4 threaded ports Montaggio in linea, su collettori multipli o su basi manifold (pag. 9-0) Installation in-line,
More informationWATER JACKET Low Voltage
WATER JACKET Low Voltage 12/2016 GENERAL CHARACTERISTICS The designing, manufacturing and testing of squirrel cage induction motors made by Felm are in according to IEC standard, Felm supply high quality
More informationSez./Section W Complementi valvole e corpi standard Valve complements, standard body
Sez./Section W Complementi valvole e corpi standard Valve complements, standard body Raccordi orientabili e kit di fissaggio per FPD...RO Sono raccordi ad occhio con tubi diam.12 mm per valvole FPD...RO,
More informationAir Service Units Filter pressure regulator + Lubricator - Size 1. Series Technical characteristics. Construction and working characteristics
ir Service Units Filter pressure regulator + Lubricator - Size Series 00 Construction and working characteristics - Zinc alloy body or reinforced technopolymer body with threaded brass insert connections.
More informationunit Motor oil capacity [kg] 52 minimum Maximum casing pressure continuo NOTES
GS2 Displacement Cilindrata Bore Alesaggio Stroke Corsa Specific torque Coppia specifica Continuous pressure(¹) Pressione in continuo(¹) Peak pressure Pressione di picco Peak power (²) Potenza di picco
More informationMonoblocchi commerciali accavallati Straddle-type monoblock units
MISTRAL AT Units Monoblocci commerciali accavallati Straddle-type monoblock units Monoblocci compatti per la refrigerazione commerciale. Unità adatte al controllo di ambienti a temperatura positiva e negativa,
More informationMade in Italy TECHNOLOGY FOR FLUIDYNAMICS N. E15/E0
PRODUCTS Made in Italy OVERVIEW TECHNOLOGY FOR FLUIDYNAMICS N. E15/E0 HELP THE NATURE Packaging contains, depending on the articles, one or more of the following materials; they must be recycled in accordance
More informationIP 54 INDIRECT ELECTRONIC BOILING PAN ELECTRIC TILTING PENTOLE ELETTRONICHE INDIRETTE RIBALTAMENTO ELETTRICO PEIR2-40 PEIR2-50 CATERING EQUIMENT
PENTOLE ELETTRONICHE INDIRETTE RIBALTAMENTO ELETTRICO PEIR2-40 PEIR2-50 INDIRECT ELECTRONIC BOILING PAN ELECTRIC TILTING IP 54 COSTRUZIONE ESTREMAMENTE ROBUSTA GRADO DI PROTEZIONE IP54 RISCALDAMENTO ELETTRICO
More informationvalvole unidirezionali one-way valves
La FOR rafforza la propria gamma prodotti con l introduzione delle valvole unidirezionali. Tali valvole permettono il libero passaggio in un solo senso (quello indicato dalla freccia) e lo impediscono
More informationACCESSORI PER OFFICINE ACCESSORIES FOR WORKSHOPS
S E Z I O N E 0-2 0 1 7 COLORI/FINITURE STANDARD STANDARD COLOURS/FINISHINGS COLORE ROSSO cod. 03020 RED Colour code 03020 art./03020 (65/03020) COLORE GIALLO cod. 20447 YELLOW Colour code 20447 art./20447
More informationLARGE MOTORS kv HIGH VOLTAGE HIGH EFFICIENCY & POWER
LARGE MOTORS kv 6-6.6-1-11 HIGH VOLTAGE HIGH EFFICIENCY & POWER 11/216 GENERAL CHARACTERISTICS The designing, manufacturing and testing of squirrel cage induction motors made by Felm are in according to
More informationvalvole VDMA 18 mm azionamento pneumatico
valvole VDMA 18 mm azionamento pneumatico pneumatically piloted valves - VDMA 18 mm Valvole a spola 5/-5/3 5/-5/3 spool valves A norma VDMA 4563 - taglia 0 (18 mm) Compliant to norm VDMA 4563 - size 0
More informationConnection Ports: 3/4 1 1/4 BSP (other thread options on request) aluminium alloy NBR (FKM on request)
HYDRAULIC FILTRATION F4-DMD series In line medium pressure filters Technical Information Pressure: Max working (acc. to NFPA T 3.1..1): F4-DMD/8/11: 7 bar (11 psi) F4-DMD1/3/4: 4 bar (8 psi) Housing Burst
More informationConnection Ports: 1/2 1 1/2 BSP (other thread options on request) aluminium alloy NBR (FKM on request)
HYDRAULIC FILTRATION In line medium pressure filters Technical Information Pressure: Max working (acc. to NFPA T 3.1.5.1): F1-XD4/63/1: 1 bar (15 psi) F1-XD16/25/4: 8 bar (12 psi) Housing Burst (acc. to
More informationAir treatment filter EZF G 3/8 - G 1/2 - G 1
EZ filter EZF G 3/8 - G 1/2 - G 1 Filters series "EZF" are produced with connections G 3/8, G 1/2 and G 1; they are available with various degrees of filtration and with manual, semiautomatic or automatic
More informationInstallation Components AirCare Air Preparation Systems
Modular Line Filters 602104 602106 602108 602109 250 psig / 17 bar Body Material icle Zinc Zinc* * Sintered Polypropylene 40µ 602104 Drain Type Port PTF ¹ ₄ 602106 Manual ³ ₈ A B C Dia. 5.27 / 1.34 0.75
More informationLubricators MS-LOE, MS series
Lubricators MS-LOE, MS series Lubricators MS-LOE, MS series Product range overview MS series service units Type Size Pressure regulation range [bar] Grade of filtration [μm] Pneumatic connection in housing
More informationInstallation Components AirCare Air Preparation Systems
Care Preparation Systems Modular Line Filters 602104 602106 602108 * Transparent 602109 nylon liquid level indicator -18 lens. to 79 C Body Bowl Material icle Zinc Aluminum Zinc* Aluminum* Sintered Polypropylene
More informationINDUSTRIAL DYEING PUMPS
INDUSTRIAL DYEING PUMPS ADVANCED FLUID MANAGEMENT SOLUTIONS Sturdy and reliable industrial and diaphragm pumps. 5 YEARS ANNI DI WARRANTY GARANZIA Made In In Italy HELP THE NATURE Packaging contains, depending
More informationAIR PREPARATION PRODUCTS. Table of Contents
AIR PREPARATION PRODUCTS Table of Contents Page Air Filters................................................. 5-7 Oil Removal Filters......................................... 8-9 Regulators..............................................
More informationBL68 - Olympian Plus plug-in system Filter/regulators and lubricators
> > Port size: 3/4... /2 (ISO G/ PTF) > > Complete air processing units pre-assembled, ready to install Technical features Medium: Compressed air only Maximum operating pressure: 7 bar (246 psi) Pressure
More informationAir Preparation Products 652 Series Filter Regulator (FR) for Process Industry Applications
Air Preparation Products Series Filter Regulator (FR) for Process Industry Applications www.asconumatics.eu Table of Contents Series Particulate Filter/Regulator 2 Particulate Filter 5 Regulator 8 Kits
More informationHPA LARGER SERIES AC ELECTRIC MOTOR
HPA LARGER SERIES AC ELECTRIC MOTOR HPA LARGER SERIES AC ELECTRIC MOTOR 25 O 25 P = N N.4 ø 14 = A C ø1/4"bsp with plug F G N.2 M E EMMEGI SpA www.emmegi-heat-exchangers.com DESIGN AND MANUFACTURE OF
More informationACCESSORI PER OFFICINE ACCESSORIES FOR WORKSHOPS
S E Z I O N E 0-2 0 1 4 COLORI/FINITURE STANDARD STANDARD COLOURS/FINISHINGS COLORE ROSSO cod. 03020 RED Colour code 03020 Esempio codifica/code example: art./03020 (65/03020) COLORE GIALLO cod. 20447
More informationSTAINLESS STEEL ATEX 2/2 SOLENOID VALVE SPU225-X NF
MAIN CHARACTERISTICS The SPU 225-X is a pilot operated ATEX 2/2 solenoid valve in stainless steel. It s intented for the shut-off the networks of agressive fluids no charged in hazardous explosives atmospheres,
More informationFRL/AirCare Air Controls & Accessories
FRL/irare ir ontrols & ccessories Lincoln Regulators, Filters & Lubricators well-planned compressed air system ensures minimum pressure loss in the system, and the removal of contaminants: water, compressor
More informationL84M, L84C - Excelon Plus Modular System Micro- and oilfog lubricator
> Port size: 3/8... 3/4 (ISO G/PTF) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Flow sensor provides a nearly constant oil/air ratio over
More informationFLUID AX POWERTECH LIQUID COOLED ASYNCHRONOUS MOTORS TYPICAL APPLICATIONS SERIES. IP PROTECTION IP54 or IP55 COOLING METHOD LIQUID
POWERTECH FLUID AX SERIES LIQUID COOLED RELIABILITY HIGH EFFICIENCY VERY GOOD TORQUE/WEIGHT RATIO VERY LOW NOISE LEVEL SUITABLE FOR VECTOR DRIVES IGBT COMPLIANT WIDE RANGE OF CUSTOMIZATION AND OPTIONS
More informationTECHNICAL CATALOGUE BALL VALVES: IDEAL
TECHNICAL CATALOGUE BALL VALVES: TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds for
More informationUNIVERSAL WHEEL TRIMS COPRICERCHI UNIVERSALI
COPRICERCHI UNIVERSALI 129 WHEEL COVERS FARAD is present on the trade from more than 30 years, with the widest range of wheel trims in Europe, establishing as one of the trade leaders. THE products are
More informationAir Preparation Products
Air Preparation Products Series Series Filter Regulator Lubricator (FRL) www.asco.com Table of Contents / Series Product Overview 2 Particulate Filter 4 Coalescing Filter 8 Adsorber Activated Carbon 8
More informationGROPPALLI. Accessori per Stufe a Pellet Flue Systems for Pellet Stoves
GROPPALLI Accessori per Stufe a Pellet Flue Systems for Pellet Stoves Numero commessa Commission number 001-15-CAB Emesso Issued 19/02/2015 QONCERT S.r.l. Organismo di Valutazione della Conformità QONCERT
More informationSez./Section W Complementi valvole e corpi standard Valve complements, standard body
FLUID-PRESS Sp Sez./Section W omplementi valvole e corpi standard Valve complements, standard body Raccordi orientabili e kit di fissaggio per FPD...RO Sono raccordi ad occhio con tubi diam. mm per valvole
More informationPressure: Max working 110 bar (1600 psi) (acc. to NFPA T ) Burst 330 bar (4800 psi) (acc. to NFPA T ) Wire mesh µm
HYDRAULIC FILTRATION In line medium pressure filters Technical Information Pressure: Max working 110 bar (1600 psi) (acc. to NFPA T 3.10.5.1) Burst 330 bar (4800 psi) (acc. to NFPA T 3.10.5.1) Housing
More informationCOILS, CONNECTORS, SOLENOID VALVES
COILS, CONNECTORS, SOLENOID VALVES 117 10 mm solenoids Solenoid valve 10 mm 00.441.0 Tension 24V DC ±10% Temperature range -5 C...+60 C (23 F... 140 F) Power 0.5... 1 W Operating pressure 0... 7 bar (0...
More informationInline filter with filter element according to DIN 24550
Inline filter with filter element according to DIN 24550 RE 51421/07.11 Replaces: 12.10 1/16 Type 245LEN0040 to 400; 245LE0130, 0150 Size according to DIN 24550: 0040 to 0400 Additional sizes: 0130, 0150
More informationPressure: Max working F280 D12x port size 1/2 & 3/4 : 420 bar (6000 psi) Burst F280 D12x port size 1/2 & 3/4 : 1260 bar (18000 psi)
HYDRAULIC FILTRATION F8-D1 series In line medium pressure filters Technical Information Housing Pressure: Max working F8 D1x port size 1/ & 3/4 : 4 bar (6 psi) F8 D1x port size 1 : 3 bar (4 psi) F8 D14x:
More informationPressure: Max working 280 bar (4000 psi) (acc. to NFPA T ) Burst 840 bar (12200 psi) (acc. to NFPA T )
HYDRAULIC FILTRATION In line medium pressure filters Technical Information Pressure: Max working 280 bar (4000 psi) (acc. to NFPA T 3.10.5.1) Burst 840 bar (12200 psi) (acc. to NFPA T 3.10.5.1) Housing
More informationInline filter with filter element according to DIN 24550
Inline filter with filter element according to DIN 24550 RE 51422/07.11 Replaces: 12.10 1/18 Type 350LEN0040 to 1000; 350LE0130, 0150 Size according to DIN 24550: 0040 to 1000 Additional sizes: 0130, 0150
More informationSez./Section B Valvole di sequenza Sequence Valves
Sez./Section B Valvole di sequenza Sequence Valves Valvole di sequenza ad azione diretta Queste valvole sono impiegate quando il funzionamento di un attuatore deve avvenire in modo automatico e sequenziale
More information2015 AGRIGARDEN MACHINES
AGRIGARDEN MACHINES 2015 G Z1 G Z1 575 EX B&S G Z1 575 EX B&S A G Z1 575 EX B&S HP 3 - kw 2.2 140/1 0,8 (0.84) 155 rpm -- A 28 cm (11 in) 52 cm (20 in) 35 (77) 2 PRINCESS M1 - MR PRINCESS MR EX 17 Robin
More informationSeries 1700 Size 1 1.8
Series 1700 1.8 Series 1700 1.9 Series 1700 Air Service Units Filter 17v01c.s.t 0 = Zinc alloy body 1 = Technopolymer body c CONNECTIONS A = G 1/8" B = G 1/4" Filter pore size A = 5 s B = 20 C = 50 TYPE
More informationConnection Ports: 3/4 1 1/4 BSP (other thread options on request)
HYDRAULIC FILTRATION Medium pressure, in line spin-on filters Technical Information Pressure: Max working (acc. to NFPA T 3.10.17): FA-4-1x: 34,5 bar (500 psi) FA-4-21: 24 bar (348 psi) Burst (acc. to
More informationBL84 - Excelon Plus Modular System Filter/regulator - Lubricator Combination Units
BL84 - Excelon Plus Modular System > Port Size 3/8" to 3/4" (PTF/ISO G) > Quickclamp connection system offers full modularity > Shut off valve & Filter/regulator with tamper resistant feature > Metal bowl
More informationVALVE FEATURES AVAILABLE MODELS LIMITS OF USE IP 67
VALVE FEATURES The resilient seat gate valve type is dedicated to the shut off of clear water and sewage water pipes. The motorization with the REGADA actuator allows the automation and the remote control
More informationSez./Section B Valvole di sequenza Sequence Valves
Sez./Section B Valvole di sequenza Sequence Valves Valvole di sequenza ad azione diretta Queste valvole sono impiegate quando il funzionamento di un attuatore deve avvenire in modo automatico e sequenziale
More informationSpare Parts Catalogue
COMPANY MAN 24 CONTACT 2017 Spare Parts Catalogue HOME EUROTRADING was only founded in 1989 in Italy but with a 50 years experience matured on the fi eld in Ethiopia, Somalia, Zimbabwe, Kenya and fi nally
More informationACCESSORI ACCESSORIES
ACCESSORI ACCESSORIES A art. 556 ACCESSORI - Rubinetti portamanometri a tre vie costruzione in bronzo limite di impiego 16 bar / 80 C attacchi M F - - 1/2 - tipo C/FLANGIA - tipo C/FLANGIA E PREMISTOPPA
More informationHIGH SPEED POWERTECH HIGH SPEED ASYNCHRONOUS MOTORS TYPICAL APPLICATIONS SERIES. IP PROTECTION IP21 or IP54 COOLING METHOD IC 06 or LIQUID
POWERTECH HIGH SPEED SERIES RELIBILITY HIGH EFFICIENCY HIGH TORQUE/INERTI RTIO HIGH SPEED RNGE ND DYNMIC LOW INERTI (4 poles) VERY LOW INERTI (2 poles) SUITBLE FOR VECTOR DRIVES IGBT COMPLINT WIDE RNGE
More informationFiltrec elements are tested according to ISO 2941, ISO 2942 and ISO 23181
Common HYDRAULIC FILTRATION Side wall mounting suction filters Technical Information Connection Ports: 1-1 1/4-1 1/2 BSP (other thread options on request) 1 1/2 SAE J518-3000/M12 Housing Materials: Cover:
More informationInline filter with filter element according to DIN 24550
Inline filter with filter element according to DIN 24550 RE 51448/06.11 Replaces: RE 51400 1/18 Type 110LEN0040 to 0400; 110LE0130, 0150 Size according to DIN 24550: 0040 to 0400 Additional sizes: 0130,
More informationAIR TORQUE HEAVY DUTY. AT-HD Series. Scotch Yoke Actuators "fully made in Italy" The results of the long experience in design
AIR TORQUE HEAVY DUTY AT-HD Series Scotch Yoke Actuators "fully made in Italy" The results of the long experience in design The COMPANY With over 20 years of experience in engineering and manufacturing
More informationBL84 - Excelon Plus Modular System Filter/regulator - Lubricator Combination Units
BL84 - Excelon Plus Modular System > Port size: 3/8... 3/4 (ISO G/PTF) > Unique Quikclamp connection system offers full modularity > 40 micron particle and high efficiency water removal (> 98%) > Shut
More informationPressure: Max working 8 bar (116 psi) (acc. to NFPA T ) Burst 16 bar (232 psi) (acc. to NFPA T )
HYDRAULIC FILTRATION Tank top return filters Technical Information Pressure: Max working 8 bar (116 psi) (acc. to NFPA T 3.1..1) Burst 16 bar (232 psi) (acc. to NFPA T 3.1..1) Housing Connection Ports:
More informationFILTER, REGULATOR AND FILTER/REGULATOR stainless steel 316L compact 1/4, high flow 1/4-1/2
FILTER, REGULATOR AND FILTER/REGULATOR stainless steel L compact /, high flow / - / Air Preparation Series FEATURES Stainless Steel, and intended for corrosive environment and suitable for use in potentially
More informationLine filter with filter element according to DIN 24550
Line filter with filter element according to DIN 2455 RE 51423/9.12 Replaces: 7.1 1/2 Type 445LEN4 to 1 Size according to DIN 2455: 4 to 1 Nominal pressure: 45 bar [6527 psi] Connection up to G 1 1/2;
More informationMechanically actuated valves
Mechanically actuated valves 3/2-5/2 spool valves with 1/8-1/4" NPT threaded ports BSP version avaiable on request Installation in any position Comprehensive range of actuations, direct or servo-piloted
More informationARO-FLO SERIES FILTERS, REGULATORS AND LUBRICATORS
ARO-FLO SERIES FILTERS, REGULATORS AND LUBRICATORS For more than years, Ingersoll Rand ARO has been an industry leader in the design and ARO-Flo Series manufacture of compressors, pneumatic tools, and
More informationPneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return
Pneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return SERIES Features Rack and pinion quarter turn (90 ) rotation Double acting and spring return models Prelubricated and tested
More informationSTC E-Series Electrically Actuated Ball Valves 316 Stainless Steel, 2-Way or 3-Way
STC E-Series Electrically Actuated Ball Valves 316 Stainless Steel, 2-Way or 3-Way Ordering Part No. = (e.g., E 1/2-3-S) Indicator / Control E 1/2 - - - 3-S Model Name Electric Actuated Valves E Port Size
More informationAudrey con rivestimento in silicone e testa in materiale composito. Audrey with silicone covering and composite head.
Califfa con rivestimento colore testa di moro e oro rosa anodizzato Califfa with dark brown covering and anodized rose gold. Califfa con rivestimento colore bordeaux e testa nero cromato. Califfa with
More informationPressure: Max working 160 bar (2300 psi) (acc. to NFPA T ) Burst 480 bar (6900 psi) (acc. to NFPA T )
HYDRULIC FILTRTION F16-XD series In line medium pressure filters Technical Information Pressure: Max working 16 bar (3 psi) (acc. to NFP T 3.1..1) Burst 48 bar (69 psi) (acc. to NFP T 3.1..1) Housing Connection
More informationTECHNICAL CATALOGUE BALL VALVES: IDEAL
TECHNICAL CATALOGUE BALL VALVES: TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds for
More informationSERIES SF2-250 SUCTION FILTER. Flow rate to 45 gpm
SERIES SF2-250 SUCTION FILTER Flow rate to 45 gpm D e s c r i p t i o n 250 The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows
More informationBy-pass: 1,7 bar (24.6 psi) setting N.B. Cartridge with integrated bypass valve and antidrainback membrane
HYDRAULIC FILTRATION Spin-on, tank top return filters Technical Information Pressure: Max working 12 bar (175 psi) (acc. to NFPA T 3.10.17) Burst 20 bar (290 psi) (acc. to NFPA T 3.10.17) Connection Ports:
More informationLubricators MS-LOE, MS series, NPT
Lubricators MS-LOE, MS series, NPT Peripherals overview 5 3 4 1 -H- Note Additional accessories: Module connector for combinations with size MS6, MS9 or MS12 Internet: rmv, armv 2 1 2/3/4/5 2/3/4/5 Mounting
More informationVALVES WITH NA ELECTRIC ACTUATOR
505-507 VALVES WITH NA ELECTRIC ACTUATOR CHARACTERISTICS The 505+NA and 507+NA cast iron ball valves are dedicated to the automatic opening/shut-off of pipes carrying low pressure unloaded common fluids.
More informationMICROVALVOLE IN TECNOPOLIMERO TECHNOPOLYMER MICROVALVES
.0.00 serie 00 MV M5-AU4 00 MV M5-AU4 line Prodotto Product MV = Microvalvola Microvalve Taglia Body width 5 = 5 mm Guida alle referenze Guide to references Connessione Connection AU4= Raccordi automatici
More informationAir service units filters, regulators and lubricators
filters, regulators and lubricators Legris offers an extensive range of filters, regulators and lubricators, including individual units and combinations. s - eliminate dust and coagulation from compressed
More informationADVANCED FLUID MANAGEMENT SOLUTIONS. Sturdy and reliable industrial and diaphragm pumps. 5 YEARS ANNI DI GARANZIA WARRANTY.
ADVANCED FLUID MANAGEMENT SOLUTIONS Sturdy and reliable industrial and diaphragm pumps. 5 ANNI DI 5 YEARS WARRANTY GARANZIA Made In Italy Industrial piston pumps TECHNICAL CHARACTERISTICS Strength points
More informationSLK SERIES SAFETY VALVES
SLK SERIES SAFETY VALVES SLK SERIES TABLE OF CONTENTS Relief Valves SLK-Series are spring loaded pressure relieving devices, suitable for discharge of compressible fluids. SLK-series safety valves are
More informationPressure: Max working 420 bar (6000 psi) (acc. to NFPA T ) Burst 1260 bar (18300 psi) (acc. to NFPA T )
HYDRULIC FILTRTION In line high pressure filters Technical Information Pressure: Max working 420 bar (6000 psi) (acc. to NFP T 3.10.5.1) Burst 1260 bar (18300 psi) (acc. to NFP T 3.10.5.1) Housing Connection
More informationDimensional Drawing - Mounting Options
Dimensions: mm Dimensional Drawing - Mounting Options Side Mounting Brackets Kit: PAT50386002 E G F C D B A A B C D E F G 25 11 20 10 6,3 50 1,9 Wall/Panel Bracket Kit: P699AT502467001 K J ØH D M 01813GB-2015/R01
More informationSUMMARY PROCESS VALVES MULTIPLE FLUIDS
SUMMARY PROCESS VALVES MULTIPLE FLUIDS P MULTIPLE-FLUID PROCESS VALVES.2 P SOLENOID VALVES, SERIES EV-FLUID.4 P SOLENOID VALVES, SERIES EV-FLUID, DIRECT ACTING.5 P SOLENOID VALVES, SERIES EV-FLUID, SERVO-ASSISTED
More information3:1 MOBILE LUBE PACKAGES (55 gal)
3:1 MOBILE LUBE PACKAGES (55 gal) Dolly-mounted oil dispenser kits with digital metered valve and 3:1 pumps. Available with or without hose reel. The ideal combinations for dispensing oil in any workplace.
More informationPressure: Max working 8 bar (116 psi) (acc. to NFPA T ) Burst 16 bar (232 psi) (acc. to NFPA T ) Buna-N (FKM on request)
HYDRAULIC FILTRATION Return filters, tank top mounting, inside-to-outside filtration Technical Information Pressure: Max working 8 bar (116 psi) (acc. to NFPA T 3.10.5.1) Burst 16 bar (232 psi) (acc. to
More informationSTAUFF STAUFF. Local solutions for individual customers worldwide. Return Line Filters RTF FILTRATION TECHNOLOGY. Ordering Code # :SFT A - UK
STAUFF THIS IS STAUFF RESPONSE AND FLEXIBILITY COMPETENT SERVICE PROMPT DELIVERY ENSURED QUALITY FRIENDLY SERVICE PROVEN IN PRACTICE Australia Stauff Corporation (Pty.) Ltd. P.O.Box 227, Unanderra Wollongong,
More informationModular electrical and pneumatic automation system
Modular electrical and pneumatic automation system For use in hazardous areas (zone 1/1) Developed in cooperation with Siemens Automation and Drives Electrical connection via PROFIBUS DP-is, electrical
More informationData sheet. D-2011/05/ Date: 02/2013. Type TK16 CNG. CNG Fuelling Nozzle. for cars at self-service fuelling stations
Data sheet D-2011/05/00160-3-3 Date: 02/2013 Type TK16 CNG CNG Fuelling Nozzle for cars at self-service fuelling stations FUTURE. TECHNOLOGY. TODAY. General Description 1 Impact protection 2 Actuation
More informationAngle Type Needle Valves - Miniature Series
Angle Type Needle Valves - Miniature Series Mod. 020-021 - 022 Applications: Pressure instruments isolation (gauges, switches, transmitters, etc.) Connections: Threaded to ANSI-ASME B1.20.1, ISO 228 -
More informationReliable and powerful starting for diesel engines and generators
When Power is Critical EN-1834-1 EN-1834-2 Reliable and powerful starting for diesel engines and generators HYDRAULIC STARTING SYSTEMS For diesel engines up to 80 litres IPU s hydraulic starting systems
More informationBALL VALVE WITH ADA PNEUMATIC ACTUATOR
702-703 BALL VALVE WITH ADA PNEUMATIC ACTUATOR DESCRIPTION The 702-703 ball valves are dedicated to the automatic shut off of industrial fluid s lines. It is a 3 pieces full valve with internal screws
More informationFilters, regulators, and lubricators
Filters, regulators, and lubricators 28 filters 3/8", 1/2", and 3/4" Ports Technical data Polycarbonate bowl Polycarbonate bowl guard Metal bowl Metal bowl sight glass Filter body Manual drain Auto drain
More information