THE NETHERLANDS (N E D E R L A N D) ECE R13, Annex 11 Appendix 3 Test report as prescribed in Paragraphs and of Appendix 2 to this Annex
|
|
- Elizabeth Bruce
- 6 years ago
- Views:
Transcription
1 Vehicle Technology Division THE NETHERLANDS (N E D E R L A N D) ECE R13, Annex 11 Appendix 3 Test report as prescribed in Paragraphs and of Appendix 2 to this Annex Test report number: RDW Extension number: Identification: 1.1. Axle: Manufacturer (name and address) : Arvin Meritor HVS Ltd, Cwmbran, Gwent, NP44 3XU, UK 1.2. Brake: Make : ROR Type : Z Model : Non driven trailer axle Technically permissible axle load (P e ) : dan ( kg) Manufacturer (name and address) : Arvin Meritor HVBS Ltd. Cwmbran, Gwent, NP 44 3XU, UK Make : ROR Type : Z (420 x 220) Model : S cam Technically permissible brake input torque C max : 2400 Nm. Automatic Brake Adjustment Device : Integrated/non-integrated (1) Brake drum or brake disc (1) : Internal diameter of drum or outside diameter of disc (1) : 419,1 419,35 mm. Effective radius : 209,5 mm. Thickness (2) :- Mass : 50,5 kg Material : Chrome Cast Iron P.O. Box 777 Tel (0) Vehicle Approval and Information 2700 AT Zoetermeer Fax + 31 (0) The Netherlands Braking-system R13-10-rev5 annex11-appendix3 v1.00 Page 1 of 6
2 Brake lining or pad (1) : Manufacturer : Federal Mogul Friction Products GmbH TMD Friction Holdings GmbH Fras-le S.A. Brasil. Type : ROR 329 Identification (must be visible when : the lining/pad is mounted on the brake shoe/backing plate) Type identification on the lining Width : 219 mm Thickness : mm ( sickle shape) Surface area : mm 2 Method of attachment : Riveted Brake geometry, attach dimensions drawing as follows: Drum brakes see Figure 2A of this Appendix Wheel(s): Single/Twin (3) Rim diameter (D) : See Figure 1A : See Figure 1A 1.4. Tyres: Reference rolling radius (R e ) at reference action (P e ) : 543 mm 1.5. Actuator: Manufacturer : Haldex Type (cylinder/diaphragm) (3) : Berg Model : 30 LS Lever length (l e ) : 127 mm (1) Automatic Brake Adjustment Device (not applicable in the case of integrated Automatic Brake Adjustment Device): Manufacturer (name and address) : Arvin Meritor Grange Road, Cwmbran Make : Meritor Type : Multi-hole Version : - Braking-system R13-10-rev5 annex11-appendix3 v1.00 Page 2 of 6
3 2. Record of test results (4) (Corrected to take account of rolling resistance => 0,01.P e ): 2.1. In the case of vehicles of Categories O 2 and O 3 : Test type: O I Annex 11, Appendix 2, Paragraph.: / Test speed -- km/h Brake actuator pressure p e 10 2 kpa 6,5 -- 6,5 Braking time -- min -- 2,55 -- Brake force developed T e N Brake efficiency T e /9.81P e ,57 0,07 0,53 Actuator stroke S e mm Brake input torque C e Nm Threshold torque C o,e Nm In the case of vehicles of Category O 4 : Test type: O III Annex 11, Appendix 2, Paragraph.: Test speed initial -- km/h Final -- km/h Brake actuator pressure p e 10 2 kpa 6,5 -- 6,5 Number of brake applications Duration of braking cycle -- s Brake force developed T e N Brake efficiency T e /9.81P e ,53 0,30 0,45 Actuator stroke S e mm Brake input torque C e Nm Threshold torque C o,e Nm Remark : for reference see testreport RDW This item is to be completed only when the brake has been subject to the test procedure defined in Paragraph 4 of Annex 19 to this Regulation to verify the cold performance characteristics of the brake by means of the brake factor (B F ). Where the brake factor is defined as input to output amplification ratio of the brake Brake factor B F : 11,1 ( eta C* 1,63 x 0,85) Remark for reference see testreport RDW Performance of the automatic brake adjustment device (if applicable) : 3.1. Free running according to Paragraph of Annex 11, Appendix 2 : yes Remark for reference see testreport RDW Braking-system R13-10-rev5 annex11-appendix3 v1.00 Page 3 of 6
4 Remark: 4. This test has been carried out and the results reported in accordance with Appendix 2 to Annex 11 and where appropriate Paragraph 4, of Annex 19 to ECE Regulation number 13, as last amended by the 10 series of amendments. Technical service (5) carrying out the test Signed : :RDW Europaweg 205 P.O. Box AT Zoetermeer The Netherlands Date : Approval authority (5) :RDW Europaweg 205 P.O. Box AT Zoetermeer The Netherlands Signed : Date : (6) At the end of test defined in Paragraph 3.6 of Annex 11, Appendix 2, the requirements of Paragraph of ECE Regulation number 13 where deemed to be fulfilled/not fulfilled (2). Signed : Date : (1) Only to be completed when an Automatic Brake Wear Adjustment Device is installed. (2) Applies to disc brakes only. (3) Strike out what does not apply. (4) Track Test/Inertia Dynamometer Test/Rolling Road Dynamometer Test (delete where not applicable). (5) To be signed by different persons even when the Technical Service and Approval Authority are the same or alternatively, a separate Approval Authority authorisation issued with the report. (6) Only to be completed when an automatic brake wear adjustment device is installed. Braking-system R13-10-rev5 annex11-appendix3 v1.00 Page 4 of 6
5 Figure 1A Tabel : Tyre 12.00R R20 Rim 7,5 x 20 8,0 x 20 8,5 x 20 7,5 x 20 8,0 x 20 8,5 x 20 Drum with X e Reaction P e B e R e D e E e F e (dan) (kg) , ,0 18, ,6 24, ,0 18,0 11,6 Braking-system R13-10-rev5 annex11-appendix3 v1.00 Page 5 of 6
6 Figure 2A Type of brake a e h e c e d e e e α oe α 1e b e r e F e (cm 2 ) S 1e S 2e Z ( 420 x 220) 171,45 323,85 31,75 36,51 13, , S 3e Braking-system R13-10-rev5 annex11-appendix3 v1.00 Page 6 of 6
THE NETHERLANDS (N E D E R L A N D) ECE R13, Annex 11 Appendix 3 Test report as prescribed in Paragraphs and of Appendix 2 to this Annex
Vehicle Technology Division THE NETHERLANDS (N E D E R L A N D) ECE R13, Annex 11 Appendix 3 Test report as prescribed in Paragraphs 3.7.1. and 3.7.2. of Appendix 2 to this Annex Test report number: RDW
More information} Rev.1/Add.12/Rev.6/Amend.4
30 December 2009 AGREEMENT CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONSFOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTEDAND/OR BE USED ON WHEELED VEHICLES AND THE CONDITIONS FOR
More informationTest Report: Reference Axle
Test Report: Reference Axle Legislation UNECE Regulation 13.11 to Supplements 10-13, Annex 11, Appendix 3 Test Details Location of Test: Date of Test: VCA Representative(s): Manufacturer s Representative(s):
More informationTest Report: Reference Axle
Test Report: Reference Axle Legislation UNECE Regulation 13.11 to Supplements 10-13, Annex 11, Appendix 3 Test Details Location of Test: Hacı Sabancı Organized Zone / Sarıçam / Adana / Turkey Date of Test:
More informationTest Report: Reference Axle
Test Report: Reference Axle Legislation UNECE Regulation 13.11 to Supplements 10-13, Annex 11, Appendix 3 Test Details Location of Test: Konya Organized Industrial Zone / Selçuklu / Konya / Turkey Date
More informationTHE NETHERLANDS (NEDERLAND) EC TYPE-APPROVAL CERTIFICATE. Reason for extension : Not applicable Approval mark : See example of type plate
Vehicle Technology Division THE NETHERLANDS (NEDERLAND) Communication concerning the: - type-approval (1) - extension of type-approval (1) - refusal of type-approval (1) - withdrawal of type-approval (1)
More informationTHE NETHERLANDS (N E D E R L A N D) COMMUNICATION
Vehicle Technology Division THE NETHERLANDS (N E D E R L A N D) COMMUNICATION Concerning (1) : - approval granted - approval extended - approval refused - approval withdrawn - production definitely discontinued
More informationTHE NETHERLANDS (N E D E R L A N D) EC TYPE-APPROVAL CERTIFICATE
Vehicle Technology Division THE NETHERLANDS (N E D E R L A N D) EC TYPE-APPROVAL CERTIFICATE Communication concerning: - type-approval (1) - extension of type-approval (1) - refusal of type-approval (1)
More informationTHE NETHERLANDS (N E D E R L A N D) COMMUNICATION
Vehicle Technology Division THE NETHERLANDS (N E D E R L A N D) COMMUNICATION Concerning (1) - approval granted - approval extended - approval refused - approval withdrawn - production definitely discontinued
More informationApproval mark PL HCR 1a A
Vehicle Technology Division THE NETHERLANDS (N E D E R L A N D) Concerning (1) - approval granted - approval extended - approval refused - approval withdrawn - production definitely discontinued COMMUNICATION
More informationE/ECE/324/Rev.1/Add.89/Rev.3/Amend.3 E/ECE/TRANS/505/Rev.1/Add.89/Rev.3/Amend.3
22 February 2017 Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions
More informationAPPLICATION FOR APPROVAL OF A TYPE OF PNEUMATIC TYRE ACCORDING TO ECE REGULATION No. 30, 02 SERIES OF AMENDMENTS
APPLICATION FOR APPROVAL OF A TYPE OF PNEUMATIC TYRE ACCORDING TO ECE REGULATION No. 30, 02 SERIES OF AMENDMENTS ------ 1. Manufacturer's name or trade mark on the tyre : GOODRIDE;WESTLAKE;TRAZANO;YARTU;CHAOYANG;
More informationGuideline Specifications for Replacement Brake Lining Assemblies and Drum Brake Linings for Power-Driven Vehicles and their Trailers
AUTOMOTIVE INDUSTRY STANDARD Guideline Specifications for Replacement Brake Lining Assemblies and Drum Brake Linings for Power-Driven Vehicles and their Trailers PRINTED BY THE AUTOMOTIVE RESEARCH ASSOCIATION
More informationTHE NETHERLANDS (N E D E R L A N D) COMMUNICATION
Vehicle Technology Division THE NETHERLANDS (N E D E R L A N D) COMMUNICATION Concerning () : - approval granted - approval extended - approval refused - approval withdrawn - production definitely discontinued
More informationQINGDAO KEBEK TIRE CO.,LIMITED LinGong Road MengYinEconomic Development Zone.Lin Yi City. ShanDong Province P.R. China
Information document No.: XHY-20180109 Page I of I APPLICATION FOR EXTENSION APPROVAL OF A TYPE OF PNEUMATIC TYRE ACCORDING TO ECE REGULATION No.30 02 SERIES OF AMENDMENTS I. 's name and address 2. Tyre
More informationTHE NETHERLANDS (N E D E R L A N D) COMMUNICATION. Approval number: E4-3R Extension number: 00
Vehicle Technology Division THE NETHERLANDS (N E D E R L A N D) COMMUNICATION Concerning (1) : - approval granted - approval extended - approval refused - approval withdrawn - production definitely discontinued
More informationTHE NETHERLANDS (N E D E R L A N D) COMMUNICATION. Approval number: E4-23R Extension number: 00
Vehicle Technology Division THE NETHERLANDS (N E D E R L A N D) COMMUNICATION Concerning (1) : - approval granted - approval extended - approval refused - approval withdrawn - production definitely discontinued
More informationReg Consolidated to Supplement 2 (Revision 3 Amendment 2)Replacement Brake Linings
[PREAMBLE] E/ECE/324/Rev.1/Add.89/Rev.3/Amend 2-E/ECE/TRANS/505/Rev.1/Add.89/Rev.3/Amend 2 3 February 2015 AGREEMENT CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS FOR WHEELED VEHICLES, EQUIPMENT
More informationTHE NETHERLANDS (N E D E R L A N D) COMMUNICATION. Approval number: E4-112R Extension number: 00
Vehicle Technology Division THE NETHERLANDS (N E D E R L A N D) COMMUNICATION Concerning (1) - approval granted - approval extended - approval refused - approval withdrawn - production definitely discontinued
More informationTHE NETHERLANDS (N E D E R L A N D) EC TYPE-APPROVAL CERTIFICATE
Vehicle Technology Division THE NETHERLANDS (N E D E R L A N D) EC TYPE-APPROVAL CERTIFICATE Communication concerning: - type-approval (1) - extension of type-approval (1) - refusal of type-approval (1)
More informationJiangsu Kinroad Xintian Motorcycle Co., Ltd. Outang Town, Wuxi City , Jiangsu Province P.R. China
April 18, 2007 RDW rijksdenst voor het wegverkeer Components and Motorcycles Pestbus777 2700 AT Zoetermeer Ther Netherlands Dear Sirs We as manufacturer/authorized representative 1 following vehicle type:
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-22612-1 SANS 20013-H:2009 Edition 2 and ECE amdt 1 ECE R13-H:2008 Revision 1 and amdt 1 SOUTH AFRICAN NATIONAL STANDARD Uniform provisions concerning the approval of passenger cars with
More informationProposed amendment to ECE Regulation 13
ACV-06-10 Rev1 Outcome of the ACV working group meeting 6 based on document ACV-06-02 Proposed amendment to ECE Regulation 13 The text reproduced below was prepared by the experts of the informal working
More informationCEMA PT16 N09Rev2. Reference document: ENTR_F1_ _rev 16 v Article / clause Original text Proposal from CEMA Rationale and
CEMA PT16 N09Rev2 Reference document: ENTR_F1_030-99_rev 16 v030908 Article / clause Original text Proposal from CEMA Rationale and Art., clause 7 The fitment of anti-lock braking systems (ABS) is not
More informationE/ECE/324/Rev.2/Add.141 E/ECE/TRANS/505/Rev.2/Add.141
30 January 2017 Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions
More informationCEMA position on draft braking regulation, 4 June 2008 ENTR/F1/ /rev16
CEMA PT16 N05Rev CEMA position on draft braking regulation, 4 June 2008 ENTR/F1/5030-99/rev16 CEMA is the European association representing the agricultural machinery industry. It represents the industry
More informationTHE NETHERLANDS (N E D E R L A N D) COMMUNICATION. Approval number: E4-7R Extension number: 00
Vehicle Technology Division THE NETHERLANDS (N E D E R L A N D) COMMUNICATION Concerning: - approval granted - approval extended - approval refused - approval withdrawn - production definitely discontinued
More informationE/ECE/324/Rev.1/Add.57/Rev.2/Amend.4 E/ECE/TRANS/505/Rev.1/Add.57/Rev.2/Amend.4
11 July 2016 Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions for
More informationETRTO/OICA proposal for a new Regulation on the installation of tyres
Submitted by the experts from ETRTO and OICA Informal document GRRF-75-20 (75 th GRRF, 17-19 September 2013 agenda item 10(a)) ETRTO/OICA proposal for a new Regulation on the installation of tyres The
More informationCNG Receptacle of class 0 Of BMT Co. Ltd. Make
Mobilität Documents regarding Approval of CNG Receptacle of class 0 Of BMT Co. Ltd. Make Approval number: E4-110R-000310-00 Report No: IN110-A0-120037 Dated 16-July-2012 Name of technical service TÜV NORD
More informationBRAKE INFORMATION FOR FKH AXLES
BRAKE INFORMATION FOR FKH AXLES S-CAM ROTATION ON DRUM BRAKE AXLES It is our recommendation (it is also a general industry recommendation) to install Drum Brake Axles so that the S-Cams rotate in the same
More informationE/ECE/324/Rev.2/Add.123/Amend.1 E/ECE/TRANS/505/Rev.2/Add.123/Amend.1
24 February 2011 Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions
More informationTEXTAR BRAKE DISCS Product Range
TEXTAR BRAKE DISCS Product Range www.textar.com INTELLIGENT DESIGN. Down to the last detail Fitment surface Precision machined turned within O.E. tolerances; for perfect assembly. Heat channel Directs
More informationISO INTERNATIONAL STANDARD. Road vehicles Brake lining friction materials Product definition and quality assurance
INTERNATIONAL STANDARD ISO 15484 First edition 2008-08-01 Road vehicles Brake lining friction materials Product definition and quality assurance Véhicules routiers Matériaux de friction pour garnitures
More informationE/ECE/324/Rev.1/Add.53/Rev.3/Amend.3 E/ECE/TRANS/505/Rev.1/Add.53/Rev.3/Amend.3
22 February 2017 Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions
More informationANNEX. to the. Commission Delegated Regulation (EU).../...
EUROPEAN COMMISSION Brussels, XXX [ ](2016) XXX draft ANNEX 1 ANNEX to the Commission Delegated Regulation (EU).../... amending Regulation (EU) No 540/2014 of the European Parliament and of the Council
More informationXingyue Group Co., Ltd. Gushan Town, Yongkang City, ,Zhejiang, P.R. China
Xingyue Group Co., Ltd. Gushan Town, Yongkang City, 321307,Zhejiang, P.R. China October 15, 2005 RDW rijksdenst voor het wegverkeer Components and Motorcycles Pestbus777 2700 AT Zoetermeer Ther Netherlands
More informationAPPLICATION FOR APPROVAL OF A TYPE OF PNEUMATIC TYRE ACCORDING TO ECE REGULATION No. 54, 00 SERIES OF AMENDMENTS
APPLICATION FOR APPROVAL OF A TYPE OF PNEUMATIC TYRE ACCORDING TO ECE REGULATION No. 54, 00 SERIES OF AMENDMENTS 1. 's name or trade mark (2) 2. Tyre type designation by the manufacturer (2) 3. 's name
More informationTHE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY
THE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY COMMUNICATION CONCERNING THE APPROVAL GRANTED (1) TO A COMPONENT TYPE- APPROVAL CERTIFICATE IN RESPECT OF A NON-ORIGINAL EXHAUST SYSTEM FOR A TYPE OF MOTORCYCLE
More informationEconomic and Social Council
United Nations Economic and Social Council ECE/TRANS/WP.29/GRVA/2018/6 Distr.: General 16 July 2018 Original: English Economic Commission for Europe Inland Transport Committee World Forum for Harmonization
More informationTest Specifications for Disc Brake Pads Passenger Cars
PAGE 1 Test Specifications for Disc Brake Pads Passenger Cars Applicable on machines type : RWS60A RWS75A RWS50B RWS75B RWS100B RWDC136B Krauss GmbH Haugweg 24 Tel. (+49)7144-8099-0 Fax. (+49)7144-8099-19
More informationTechnical Report. No. KO250.3E. on the TRAILER CONTROL MODULE
Technical Report No. KO250.3E on the TRAILER CONTROL MODULE Mobilität TÜV NORD Mobilität GmbH & Co. KG IFM Institute for Vehicle Technology and Mobility Adlerstraße 7 45307 Essen Tel.: +49 (0)201 825-4120
More informationMP400E35HT ( CURSOR )
N. : DT 190 064 TECHNICAL DESCRIPTIONS MP400E35HT ( CURSOR ) The information in this literature is intended to be of a general nature only. Iveco reserve the right to modify or change specification at
More informationEconomic and Social Council
United Nations Economic and Social Council Distr.: General 29 December 2014 Original: English Economic Commission for Europe Inland Transport Committee World Forum for Harmonization of Vehicle Regulations
More informationISO Earth-moving machinery Wheeled or high-speed rubber-tracked machines Performance requirements and test procedures for brake systems
INTERNATIONAL STANDARD ISO 3450 Fourth edition 2011-11-01 Earth-moving machinery Wheeled or high-speed rubber-tracked machines Performance requirements and test procedures for brake systems Engins de terrassement
More informationTHE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY EU TYPE-APPROVAL CERTIFICATE
Communication concerning: EU type-approval extension of EU type-approval refusal of EU type-approval withdrawal of EU type-approval THE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY EU TYPE-APPROVAL CERTIFICATE
More informationTECHNICAL DATA SHEET
/ / / TECHNICAL DATA SHEET www.manitou.com M26-2 / M26-2H M26-4 Max. capacity 2 kg at mm CDG height (standard mast) 3.70 m Max. lifting height 7.00 m Unladen time 0.5 m/s Lowering 0.5 m/s Tyres Forward
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 20918 First edition 2007-10-15 Road vehicles Braking threshold pressures for heavy commercial vehicle combinations with fully pneumatic braking systems Test with roller brake
More informationANNEXES. to the COMMISSION DELEGATED REGULATION
EUROPEAN COMMISSION Brussels, 15.2.2018 C(2018) 863 final ANNEXES 1 to 2 ANNEXES to the COMMISSION DELEGATED REGULATION amending and correcting Delegated Regulation (EU) 2015/208 supplementing Regulation
More informationROR Trailer Products Axle & Brake Parts List TA and TC Series Axles including disc and drum brake variants
ROR Trailer Products Axle & Brake Parts List TA and TC Series Axles including disc and drum brake variants TA Hub Assembly 14 1 3 10 9 9 20 21 8 5 6 7 11 1 4 2 19 16 13 20 15 17 21 13 18 12 19 2 TA/TC
More informationCOMMISSION REGULATION (EU) No /.. of XXX
EUROPEAN COMMISSION Brussels, XXX B4 1667206 [ ](2014) XXX DRAFT 30.04.2014 COMMISSION REGULATION (EU) No /.. of XXX supplementing Regulation (EC) No 661/2009 of the European Parliament and of the Council
More information} Rev.1/Add.12/Rev.6/Amend.3
30 December 2009 AGREEMENT CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONSFOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTEDAND/OR BE USED ON WHEELED VEHICLES AND THE CONDITIONS FOR
More informationTYPE APPROVAL DOCUMENTS EXPLANATIONS
TYPE APPROVAL DOCUMENTS EXPLANATIONS WVTA Technical Book DECEMBER 2010 INTRODUCTION Le Technical Book est un document européen Les explications suivantes ainsi que les extraits sont en anglais PAGE 2 INFORMATION
More informationE/ECE/324/Rev.1/Add.38/Rev.2 E/ECE/TRANS/505/Rev.1/Add.38/Rev.2
E/ECE/324/Rev.1/Add.38/Rev.2 24 January 2018 Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be
More informationDäck för personbilar, lastbilar, bussar och motorcyklar Metoder för mätning av rullmotstånd (ISO 18164:2005, IDT)
SVENSK STANDARD Fastställd 2005-08-02 Utgåva 1 Däck för personbilar, lastbilar, bussar och motorcyklar Metoder för mätning av rullmotstånd (ISO 18164:2005, IDT) Passenger car, truck, bus and motorcycle
More informationROR Trailer Products Axle & Brake Parts List LM and LC Series Axles including disc and drum brake variants
ROR Trailer Products Axle & Brake Parts List LM and LC Series Axles including disc and drum brake variants LM/LC Hub Assembly 14 1 3 10 9 19 20 8 5 6 7 11 1 4 2 18 16 13 17 15 13 12 2 LM/LC Hub Assembly
More information- 13: Definition of parking brake CEMA proposes to replace parking brake by parking braking system
CEMA comments on EU COM Draft Tcat_RVBR_v2_0 Amendments compared to CEMA Working Document 131113_CEMA_Draft_EU_Braking_Regulation CEMA response to EU COM comments in green font Chapter I: Article 2 Definitions:
More informationEconomic and Social Council
United Nations Economic and Social Council ECE/TRANS/WP.29/GRRF/2014/24 Distr.: General 4 July 2014 Original: English Economic Commission for Europe Inland Transport Committee World Forum for Harmonization
More informationEconomic and Social Council
UNITED NATIONS Economic and Social Council Distr. GENERAL TRANS/WP.29/78/Rev.1/Amend.2 16 April 1999 ENGLISH Original: ENGLISH and FRENCH ECONOMIC COMMISSION FOR EUROPE INLAND TRANSPORT COMMITTEE Working
More informationAPPLICATION TO BUILD A CAMS DEDICATED RALLY CAR
www.dtei.sa.gov.au ABN: 92 366 288 135 MR 639 03/08 1. ABOUT YOU LODGEMENT INFORMATION In person: Department for Transport, Energy and Infrastructure, Kateena Street, Regency Park SA 5010 By post: Vehicle
More informationMotor Vehicles Working Group (MVWG)
EUROPEAN COMMISSION ENTERPRISE DIRECTORATE-GENERAL Single market, regulatory environment, industries under vertical legislation Automotive industry Motor Vehicles Working Group (MVWG) Brussels, 27 October
More informationProvläsningsexemplar / Preview INTERNATIONAL STANDARD. Motorcycles - Brakes and braking devices - Tests and measurement methods
INTERNATIONAL STANDARD ISO 8710 First edition 1995-08-01 Motorcycles - Brakes and braking devices - Tests and measurement methods Mo tocycles - Freins et dispositifs de freinage - Methodes d essai et de
More informationINNOVATION. HIGH PERFORMANCE. SAFETY. YESTERDAY. TODAY. TOMORROW.
INNOVATION. HIGH PERFORMANCE. SAFETY. YESTERDAY. TODAY. TOMORROW. www.textar.com PERFORMANCE AND SAFETY ASSURED. Choosing the right friction solution needn t be a challenge. Be it for truck, trailer, bus
More informationPARTS/CROSS-REFERENCE INFORMATION
PARTS/CROSS-REFERENCE INFORMATION AA1 and S-ABA Brake Adjusters Innovative Vehicle Solutions Important Notice The products described within this literature, including without limitation, product features,
More informationE/ECE/324/Rev.1/Add.77/Rev.1/Amend.3 E/ECE/TRANS/505/Rev.1/Add.77/Rev.1/Amend.3
22 February 2017 Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions
More informationEBC Brakes EBC Brakes World HQ, Upton Valley Way East, Pineham, Northampton, NN4 9EF United Kingdom. EBC Double-H Sintered
Vehicle Certification Agency, 1 The Eastgate Office Centre Eastgate Road, Bristol, BS5 6XX, United Kingdom. Switchboard: 0117 951 5151 System and Component Section Fax: 0117 952 4163 MANUFACTURER DETAILS
More informationJiangsu Kinroad Xintian Motorcycle Co., Ltd. Outang Town, Wuxi City , Jiangsu Province P.R. China
Jiangsu Kinroad Xintian Motorcycle Co., Ltd. Outang Town, Wuxi City 214153, Jiangsu Province P.R. China October 18, 2006 RDW rijksdenst voor het wegverkeer Components and Motorcycles Pestbus777 2700 AT
More informationE/ECE/324/Rev.1/Add.54/Rev.2/Amend.1 E/ECE/TRANS/505/Rev.1/Add.54/Rev.2/Amend.1
28 October 2016 Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions
More informationE/ECE/324/Rev.2/Add.140 E/ECE/TRANS/505/Rev.2/Add.140
30 January 2017 Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions
More informationE/ECE/324/Rev.1/Add.91/Rev.1/Amend.2 E/ECE/TRANS/505/Rev.1/Add.91/Rev.1/Amend.2
7 December 2017 Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and
More informationBRAKE CHAMBERS OE STANDARD GUARANTEED
BRAKE CHAMBERS OE STANDARD GUARANTEED TRUCK DISC CHAMBERS UNBC0009 UNBC0032 UNBC0017 UC PART TYPE DESCRIPTION WABCO REF KNORR REF UNBC0027 T10/16 DISC BRAKE CHAMBER (M22 VOSS PORTS) C/W BRACKET 9254863000
More informationTorque Influence on C3 category tyres
Informal Document No. GRB-51-13 (51st GRB, 15-17 February 2010, Agenda Item 4(b)) Torque Influence on C3 category tyres The tyres when type approved according to R117.02 should not be overruled by R51.03
More informationE/ECE/324/Rev.2/Add.102/Rev.1 E/ECE/TRANS/505/Rev.2/Add.102/Rev.1
30 August 2011 Agreement Concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted and/or be used on wheeled vehicles and the conditions for
More informationTHE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY
THE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY COMMUNICATION CONCERNING THE APPROVAL GRANTED (1) TO A COMPONENT TYPE- APPROVAL CERTIFICATE IN RESPECT OF A NON-ORIGINAL EXHAUST SYSTEM FOR A TYPE OF MOTORCYCLE
More informationRide-on lawnmowers (combustion engine powered)
Compliance Guide Rev.2.3 Edition 04/2018 Ride-on lawnmowers (combustion engine powered) This guide is intended to help market surveillance authorities with the checking of conformity of combustion engine
More informationMH260E24Y/TN ( CURSOR )
N. : DT 60 00 TECHNICAL DESCRIPTIONS MH60E4Y/TN ( CURSOR ) The information in this literature is intended to be of a general nature only. Iveco reserve the right to modify or change specification at any
More informationMethods of brake efficiency evaluation for heavy duty vehicles in Slovakia
TESTEK, s.r.o., technical service for technical vehicle inspections P.O.Box 84, Plachého 14, SK 840 02 Bratislava, Slovak Republic http://www.testek.sk, e-mail: testek@testek.sk, tel.:+421254651311 Methods
More informationOfficial Journal of the European Union
L 140/8 COMMISSION DELEGATED REGULATION (EU) 2018/829 of 15 February 2018 amending and correcting Delegated Regulation (EU) 2015/208 supplementing Regulation (EU) No 167/2013 of the European Parliament
More informationHOMOLOGATION OF KART ENGINE PROVISIONAL
HOMOLOGATION OF KART ENGINE Category MSA Cadet Manufacturer IAME Model Parilla Gazelle 60cc U.K. Valid From 01 January 2013 Number of pages of main fiche 16 This Homologation Form reproduces descriptions,
More informationPARTS LIST TRAILER BRAKE SYSTEMS. LIT NO: DATE: October 2017 REVISION: H
PARTS LIST TRAILER BRAKE SYSTEMS LIT NO: 97-097 DATE: October 07 REVISION: H TABLE OF CONTENTS INTRODUCTION ABBREVIATIONS DRUM BRAKES & 6. DRUM FOUNDATION BRAKE HXS Brakes P-TYPE DRUM FOUNDATION BRAKE
More informationEconomic and Social Council
United Nations Economic and Social Council ECE/TRANS/WP.29/GRRF/2013/32 Distr.: General 5 July 2013 Original: English Economic Commission for Europe Inland Transport Committee World Forum for Harmonization
More informationROR Trailer Products Drum Brake Axles
ROR Trailer Products Drum Brake Axles choose for reliability... choose for quality... choose for robustness......your profitability is our concern The Right Combination Drum Brakes LM/LMC (Q + MX 420 x
More informationTRAILER ANTI-LOCK BRAKING SYSTEM APPROVAL REPORT
TRAILER ANTI-LOCK BRAKING SYSTEM APPROVAL REPORT Mobilität Approval Report No: EB 123.9E TÜV NORD Mobilität GmbH & Co. KG IFM Institute for Vehicle Technology and Mobility Adlerstraße 7 45307 Essen Tel.:
More informationEXAMPLES GEARS. page 1
(EXAMPLES GEARS) EXAMPLES GEARS Example 1: Shilds p. 76 A 20 full depth spur pinion is to trans mit 1.25 kw at 850 rpm. The pinion has 18 teeth. Determine the Lewis bending stress if the module is 2 and
More informationRevision 1. Incorporating all valid text up to: Supplement 5 to the original version of the Regulation Date of entry into force: 7 December 2002
L 120/40 Official Journal of the European Union 13.5.2010 Only the original UN/ECE texts have legal effect under international public law. The status and date of entry into force of this Regulation should
More informationCommon position by FR and CEMA on mechanical couplings for towed vehicles 28/9/2015
Common position by FR and CEMA on mechanical couplings for towed vehicles 28/9/2015 ANNEX XXXIV Requirements on mechanical couplings 1. Definitions For the purposes of this Annex: 1.1. Mechanical coupling
More informationButterfly valves PN6, PN10, PN16
4 131 ACVATIX Butterfly valves PN6, PN10, PN16 VKF41.. Grey cast iron housing EN-GJL-2 DN 40 200 k vs 4000 m 3 /h For fitting between PN 6, PN 10, PN 16 counter-flanges to ISO 7005 Metallic tight-closing
More informationInformation Sheet
------------Information Sheet------------ Statement Requirements for Trailers Requirements regarding trailers used on the road are given in the Road Vehicles (Construction and Use) Regulations 1986, as
More informationSECTION 1 - CHASSIS 1.1 CHASSIS FRAME
5TH CATEGORY - HISTORIC RACING GROUP Nb APPROVED VEHICLE SPECIFICATION This form details the approved specifications of individual vehicle models in the 5th Category Historic car group. To be issued with
More informationTransmitted by the expert from the European Commission (EC) Informal Document No. GRRF (62nd GRRF, September 2007, agenda item 3(i))
Transmitted by the expert from the European Commission (EC) Informal Document No. GRRF-62-31 (62nd GRRF, 25-28 September 2007, agenda item 3(i)) Introduction of Brake Assist Systems to Regulation No. 13-H
More informationWeight Stroke TÜV-Inspection approx. [kg] II )4) BZ M16x Port threads:
Commercial Vehicle Systems Product DATA Spring Brakes (S-cam), diaphragm/piston Doc. No. Y1137 (EN - Rev. 5) September 216 PD-413-1 Function This range of Spring Brakes is used on axles fitted with drum
More informationNHVIM Section 2 BASIC BRAKES MAINTENANCE
NHVIM Section 2 BASIC BRAKES MAINTENANCE Chair Lance Fisher, JLP Panel Members - Andrew Archibald, TMR Queensland - Renzo Barone, Meritor - Kevin Gibson, Knorr-Bremse Chair Lance Fisher, JLP Panel Members
More informationDATA PD BR43.. Load Sensing Valve - mechanically controlled. Product. Function. Technical Features. Range Overview
Commercial Vehicle Systems Product DATA BR.. Doc. No. Y0 (EN - Rev. 00) May 0 PD-0-000 Function The Load Sensing Valve is used to adjust the applied service brake pressure in relation to the load imposed
More informationTEST REQUIREMENTS FOR TRUCK STEEL WHEELS SPECIFICATION D'ESSAI DES ROUES EN ACIER DE CAMIONS PRÜFVERFAHREN FÜR NUTZFAHRZEUG - STAHL - RÄDER
EUWA STANDARDS May 2006 TEST REQUIREMENTS FOR TRUCK STEEL WHEELS E S 3.11 SPECIFICATION D'ESSAI DES ROUES EN ACIER DE CAMIONS PRÜFVERFAHREN FÜR NUTZFAHRZEUG - STAHL - RÄDER Page 1/8 1 - SCOPE This Euwa
More informationOverview. KNOTT brakes overview The basics for around 2000 solutions BRAKES. We make your brake
Overview BRAKES KNOTT brakes overview The basics for around 2000 solutions www.knott.de We make your brake KNOTT develops and produces individual brake solutions for all branches: from agriculture and
More informationParts and Cross Reference Guide
Parts and Cross Reference Guide L00090 Rev. 7/07 AA1 and S-ABA Brake Adjusters www.haldex.com Table Of Contents Features Haldex ABA (AA1)............................... 1 Haldex S-ABA...................................
More informationAir Brake Inspection Presented By: G.L. May
Air Brake Inspection 2012 Presented By: G.L. May Outline of this course Objective of this course: The technician will have a better understanding of requirements for air drum brakes and air disc brakes
More informationE/ECE/324/Rev.1/Add.91/Rev.1 E/ECE/TRANS/505/Rev.1/Add.91/Rev.1
5 December 2012 Agreement Concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted and/or be used on wheeled vehicles and the conditions
More informationE/ECE/324/Rev.1/Add.57/Rev.3 E/ECE/TRANS/505/Rev.1/Add.57/Rev.3
30 November 2017 Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and
More informationINTEROPERABILITY UNIT FRICTION ELEMENTS FOR WHEEL TREAD BRAKES FOR FREIGHT WAGONS
INTEROPERABILITY UNIT TECHNICAL DOCUMENT FRICTION ELEMENTS FOR WHEEL TREAD BRAKES FOR FREIGHT WAGONS REFERENCE: ERA/TD/2013-02/INT DOCUMENT TYPE: TECHNICAL DOCUMENT VERSION: 3.0 DATE: 27/11/2015 ERA/TD/2013-02/INT
More information