ROR Trailer Products Axle & Brake Parts List LM and LC Series Axles including disc and drum brake variants

Size: px

Start display at page:

Download "ROR Trailer Products Axle & Brake Parts List LM and LC Series Axles including disc and drum brake variants"

Rosemary Park
5 years ago
Views:

1 ROR Trailer Products Axle & Brake Parts List LM and LC Series Axles including disc and drum brake variants

2 LM/LC Hub Assembly

3 LM/LC Hub Assembly Item Description Part Number 1 Screw, hub cap Hub cap Hub cap hubodometer Gasket, hub cap Screw, pinch nut Pinch nut Retaining clip PK5 8 Retaining washer Bearings Oil seal A 11 LM Hub assembly* A LC Hub assembly (not shown)** 12 Brake drum V 13 Wheel nut see table below 14 Wheel bolt, steel wheel Wheel bolt, aluminium wheel Wheel bolt, universal steel/aluminium, coated, (use with dacromet wheel nut) Filler plate for axles manufactured before April Filler plate for axles manufactured after April Nut, filler plate Dust cover Screw, dust cover Plug, blanking Plug, inspection g Cartridge MERITOR hub grease (not shown) g Tube Optimol Optimoly White Paste T (not shown) *Does not include items 5 or 6. **see page 13 for LC hub parts WHEEL NUTS 32mm ACROSS FLATS NEW PART NUMBER REPLACES EXISTING NUMBERS TYPE FINISH COATING / STANDARD OPEN PHOSPHATE & OIL / STANDARD OPEN DACROMET 500 & OIL / CLOSED END PHOSPHATE & OIL N/A CLOSED END DACROMET 500 & OIL 3

4 LM/LC Brake Assembly

5 LM/LC Brake Assembly Item Description Part Number 1 Brake shoe lined assembly R 2 Brake lining, anchor end 3 Brake lining, cam end } Brake lining kit (including rivets) BLKQ+R 4 Brake shoe assembly, welded S 5 Roll pin PK20 6 Return spring PK10 7 Retaining spring PK100 8 Cam roller assembly Anchor pin and bush assembly *10 25g Sachet MERITOR brake grease (not shown) *11 400g Cartridge MERITOR brake grease (not shown) *Must be used with items 8 and 9. NB. Items 8 and 9 must be used as a matched set, individual components are not interchangeable with old style parts. 5

6 LM/LC Camshaft Assembly up to 31st March A A A

7 LM/LC Camshaft Assembly up to 31st March 2001 Item Description Part Number 1 Camshaft LH/RH See table below 2 Cam head bearing assembly Screw, bearing Inner boot, cam end A Outer boot, cam end Tie wrap Camshaft bracket A Camshaft bracket (axles built after Sept 99) Spline end bearing assembly Inner boot, spline end A Outer boot, spline end Washer, spacing, thick Washer, spacing, thin Retaining washer Circlip Air chamber bracket Assister spring PK10 *15 25g Sachet MERITOR grease (not shown) *15 400g Cartridge MERITOR grease (not shown) NB. Item 15 must be used on items 2 & 7. Dimension A (C/L OF BRAKE TO C/L OF SLACK ADJUSTER) Dimension B (MACHINED LENGTH UNDER HEAD) Dimension A Dimension B Right Hand Part Number Left Hand

8 LM/LC Camshaft Assembly from 1st April A 3A A

9 LM/LC Camshaft Assembly from 1st April 2001 Item Description Part Number 1 Camshaft LH/RH See table below 2 Cam head bearing assembly** A23105Q Screw, bearing, cam end** A Screw, bearing, spline end** Washer seal** 1229K4795 4A Boot, cam end** 2260K Tie wrap** Lip seal (part of item 2) 7 Washer** 1229S Snap ring** 1229T Camshaft bracket Spline end bearing assembly** Inner boot, spline end** A Outer boot, spline end** Washer, spacing, thick** Washer, spacing, thin** Retaining washer** Circlip** Air chamber bracket Assister spring PK10 *18 25g Sachet MERITOR grease (not shown) *18 400g Cartridge MERITOR grease (not shown) *NB. Item 18 must be used on items 2 & 10. ** All contained in service kit AXL 140 Dimension A (C/L OF BRAKE TO C/L OF SLACK ADJUSTER) Dimension B (MACHINED LENGTH UNDER HEAD) Dimension A Dimension B Right Hand Part Number Left Hand *Steering axle * * * * 9

10 LM/LC ABS Assembly

11 LM/LC ABS Assembly Item Description Part Number 1 Pole wheel Sensor block Screw, sensor block Spring clip Sensor Strain relief bush Cable tie Grease for sensor bush (not shown)

12 LC Hub Assembly A 8A 12

13 LC Hub Assembly Item Description Part Number 1 Screw, hub cap Hub cap Hub cap hubodometer Gasket, hub cap Axle end nut Stake washer assembly Auxiliary oil seal A 8 LC Hub assembly, drum brake A LC Hub assembly, disc brake B LC Hub assembly offset, ELSA 2 disc brake only (not shown) C LC Hub assembly 8 stud, ELSA 195 disc brake only (not shown) Wheel nut, drum brake see table below 9A Wheel nut, disc brake Wheel bolt, steel wheel Wheel bolt, aluminium wheel Wheel bolt, universal steel/aluminium wheel, coated, (use with dacromat wheel nut) WHEEL NUTS 32mm ACROSS FLATS NEW PART NUMBER REPLACES EXISTING NUMBERS TYPE FINISH COATING / STANDARD OPEN PHOSPHATE & OIL / STANDARD OPEN DACROMET 500 & OIL / CLOSED END PHOSPHATE & OIL N/A CLOSED END DACROMET 500 & OIL 13

14 LM DX195 Hub, Disc and ABS Assembly A

15 LM DX195 Hub, Disc and ABS Assembly Item Description Part Number 1 Screw, hub cap Hub cap Hub cap hubodometer Gasket, hub cap Screw, pinch nut Pinch nut Retaining clip PK5 8 Retaining washer Bearings Oil seal A 11 LM Hub assembly* A LC Hub assembly (not shown)** 12 Wheel nut see table below 13 Wheel bolt, steel wheel Wheel bolt, aluminium wheel Wheel bolt, universal steel/aluminium wheel, coated (use with dacromat wheel nut) Brake disc M16 x 65 Brake disc mounting bolt Hardened washer Sensor bracket (from June 2000) A Sensor block (pre June 2000) Spring clip Sensor Screw, sensor bracket (from June 2000) M16 x 60 Brake disc flanged mounting bolt replaces items 15 & 16 from July *Does not include items 5 or 6. **see page 13 for LC hub parts WHEEL NUTS 32mm ACROSS FLATS NEW PART NUMBER REPLACES EXISTING NUMBERS TYPE FINISH COATING / STANDARD OPEN PHOSPHATE & OIL / STANDARD OPEN DACROMET 500 & OIL / CLOSED END PHOSPHATE & OIL N/A CLOSED END DACROMET 500 & OIL 15

16 DX195 Brake Assembly 1 *see below parts list

17 DX195 Brake Assembly Item Description Part Number 1a Brake assembly DX195 25, 33 & 51 (service exchange), LH SR 1b Brake assembly DX195 26, 34 & 52 (service exchange), RH SR 2 Brake pad kit MDP Spring pad** 4 Retaining pin** 5 Split pin** 6 M16 x 45 Caliper mounting bolt Hardened washer Plug** 9 Retaining washer** 10 M16 x 45 Caliper flanged mounting bolt replaces items 6 & 7 from July Stabiliser bar 2297J Disc brake adjuster sleeve & thrust plate kit, LH MCK Disc brake adjuster sleeve & thrust plate kit, RH MCK Disc brake adjuster kit, LH MCK Disc brake adjuster kit, RH MCK Pad fitting kit MBA Pad wear indicator kit MBA Guide pin & seal kit MCK Eccentric shaft seal kit MCK Seal kit MCK1192 ** Available in kit MBA100 * Brake Assembly Rear View 1a 1b DX195 Caliper Part Number Cross Reference Caliper DX with 90mm lever & pads DX with 90mm lever & pads DX with 80mm lever & pads DX with 80mm lever & pads DX (Aftermarket part numbers) replaces DX DX (Aftermarket part numbers) replaces DX Part Number SR (no pads/levers) SR (no pads/levers) SR (no pads/levers) SR (no pads/levers) SR (no pads/levers) SR (no pads/levers) 17

18 DX195 Actuation and Air Chambers /48 *IMPORTANT see note 45/ /40 37/ * Part No.7. MUST BE USED on air chambers with a caged, air off, push rod length of 45/48mm, measured from the mounting face of the chamber to the centre of the clevis pin hole. Later models of brake chamber with 37/40mm pushrod length have a formed front housing and MUST NOT be fitted with the spacer plate 18

19 DX195 Actuation and Air Chambers Item Description Part Number 1 Lever boot 1205X Clamp bolt M8 x 60 MS208060Z1 3 Lever 80mm MCK Lever 90mm MCK Nut M8 MNL208Z1 5 Clevis pin R-Clip Part Number 45/48mm Part Number 37/40mm 7* Spacer plate None 8 T 24/ ** 8 T 22/ T 20/ T 18/ T T T T * Part No.7. Must be used on air chambers with a caged, air off, push rod length of 45/48mm. It must never be used on chambers with a caged push rod length of 37/40mm. ** In tandem applications the following chambers are used: (RH) (LH) 19

20 LM ELSA 2 Hub, Disc and ABS Assembly

21 LM ELSA 2 Hub, Disc and ABS Assembly Item Description Part Number 1 Screw, hub cap Hub cap Hub cap hubodometer Gasket, hub cap Screw, pinch nut Pinch nut Retaining clip PK5 8 Retaining washer Bearings Oil seal A 11 LM Hub assembly* A LM Hub assembly offset (not shown)* B LC Hub assembly (not shown)** 12 Wheel nut Wheel bolt, steel wheel Wheel bolt, aluminium wheel Wheel bolt, universal steel/aluminium wheel, coated (use with dacromat wheel nut) Brake disc MBR M16 x 60 Brake disc flanged mounting bolt Sensor block Spring clip Sensor Screw, sensor bracket *Does not include items 5 or 6. **see page 13 for LC hub parts 21

22 ELSA 2 Brake Assembly 3b 6c 6a 6i 2b 3d 6j 11 3c 6d 3a 10 6b 6e 6g 1 4a 4b 6h 8 2a 6b 5a 6f 6l 5b 4c 22

23 ELSA 2 Brake Assembly Item Description Part Number 1 Service caliper, RH LRG572 1 Service caliper, LH LRG573 3a-3d Carrier kit MCK1146 4a-4c Brake pad kit MDP5073 5a-5b Pad retainer kit MCK1174 6a-6j Guide pin kit* MCK Tappet head kit* MCK Actuator seal PK10 11 Adjuster stem dust cover PK10 12 M18 x 50 Caliper flanged mounting bolt (not shown) *includes grease (not shown) 23

24 LM/LC ELSA 2 Air Chamber Assembly Z 24

25 LM/LC ELSA 2 Air Chamber Assembly Air chamber Port orientation (angle Z ) Type T T T T T T14/ T16/ T18/ T20/ T22/ T24/ T27/

26 LM ELSA 195 Hub, Disc and ABS Assembly

27 LM ELSA 195 Hub, Disc and ABS Assembly Item Description Part Number 1 Screw, hub cap Hub cap Hub cap hubodometer Gasket, hub cap Screw, pinch nut Pinch nut Retaining clip PK5 8 Retaining washer Bearings Oil seal A 11 LM Hub assembly* A LC Hub assembly (not shown)** 12 Wheel nut Wheel bolt, steel wheel Wheel bolt, aluminium wheel Wheel bolt, universal steel/aluminium wheel, coated (use with dacromat wheel nut) Brake disc A Brake disc 8 stud, LC only MBR M18 x 50 Brake disc flanged mounting bolt Sensor block Spring clip Sensor Screw, sensor bracket *Does not include items 5 or 6. **see page 13 for LC hub parts 27

28 ELSA 195 Brake Assembly b 6c 2c 6d 4c 6j 4b 6i 6b 6a 2a 6f 1 6g 6f 4a 6h 3a 3b 8 5a 3c 5b 28

29 ELSA 195 Brake Assembly Item Description Part Number 1 Service caliper, RH LRG702 1 Service caliper, LH LRG703 2a-2c Carrier kit MCK1252 3a-3c Brake pad kit MDP5093 4a-4c Seal kit* MCK1253 5a-5b Pad retainer kit MCK1174 6a-6j Guide pin kit* MCK Piston head seal kit* MCK Pad wear warning indicator kit (not shown) MBAKIT Actuator seal PK10 11 Adjuster stem dust cover PK10 12 M18 x 50 Caliper flanged mounting bolt (not shown) *includes grease (not shown) 29

30 LM/LC ELSA 195 Air Chamber Assembly Z 30

31 LM/LC ELSA 195 Air Chamber Assembly Air chamber Port orientation (angle Z ) Type T T T T T T T T14/ T14/ T16/ T16/ T18/ T20/ T22/ T24/ T24/ T27/ T30/

32 Warranty A comprehensive network of original parts distributors and service stations operate throughout Europe; this is supported internationally with agents strategically placed around the world. All Meritor replacement parts obtained through original parts distributors are covered by a one year warranty. For full warranty terms and conditions see Meritor Warranty Terms and Conditions Publication No Meritor reserve the right to make changes in specifications shown herein or add improvements at any time without notice or obligation. PARTS SHOWN IN THIS SPARES LIST ARE MADE FROM DRAWINGS IN WHICH COPYRIGHT SUBSISTS. THE MAKING OF COPIES OF ANY OF THESE PARTS IS PROHIBITED. Meritor HVS Limited The high quality assurance management systems applied by Meritor are endorsed with the awarding of ISO 9001, Lloyd s Register Quality Assurance. 32

33 33

34 34

35 35

ArvinMeritor Commercial Vehicle Aftermarket AG Neugutstrasse 89 8600 Dübendorf Switzerland Tel: +41 (0)44 824 82 00 Fax: +41 (0)44 824 82 65 ArvinMeritor Commercial Vehicle

com Descriptions and specifications were in effect at the time of publication and are subject to change without notice or liability.

36 ArvinMeritor Commercial Vehicle Aftermarket AG Neugutstrasse Dübendorf Switzerland Tel: +41 (0) Fax: +41 (0) ArvinMeritor Commercial Vehicle Aftermarket Ltd. Park Lane, Great Alne, Alcester Warwickshire B49 6HT U.K. Tel: Fax: Descriptions and specifications were in effect at the time of publication and are subject to change without notice or liability. Meritor reserve the right to make design improvements, change or discontinue parts at any time ArvinMeritor This catalogue may be used only to specify and sell products of ArvinMeritor, its subsidiaries and affiliated companies. Issued Publication CVA rev. 2

ROR Trailer Products Axle & Brake Parts List TA and TC Series Axles including disc and drum brake variants

ROR Trailer Products Axle & Brake Parts List TA and TC Series Axles including disc and drum brake variants TA Hub Assembly 14 1 3 10 9 9 20 21 8 5 6 7 11 1 4 2 19 16 13 20 15 17 21 13 18 12 19 2 TA/TC