CONTINUED FROM PART- 2 INTRODUCTION
|
|
- Amos Flowers
- 5 years ago
- Views:
Transcription
1 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in the Official Journal of The Patent Office. This Journal is being published on weekly basis on every Friday covering the various proceedings on Designs as required according to the provisions of under Rule 22, 25, 27 and 39 of the Design (Amendment) Rules, All the enquiries on this Official Journal and other information as required by the public should be addressed to the Controller General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that the content can be enriched
2 DESIGN CORRIGENDUM The Registered Design No which has been erroneously published in the official Journal of India dated 05/08/2011, part II, at page 37, column 1 in the name of Fantasy Diamond Corporation 1550 West Carroll Avenue Chicago, Illinois 60607, United States of America, Class 11-01, Date of Registration 06/04/2010, Titled as Gemstone In Jewelry, Priority Number 29/344, 947, Date 06/10/2009, Country U.S.A. should read as Fantasy Diamond Corporation 1550 West Carroll Avenue Chicago, Illinois 60607, United States of America, Class 11-01, Date of Registration 06/04/2010, Titled as Gemstones In Jewelry, Priority Number 29/344, 947, Date 06/10/2009, Country U.S.A
3 COPYRIGHT PUBLICATION SL NO CASE NUMBERS RENEWED ON
4 THE DESIGNS ACT 2000 SECTION 30 DESIGN ASSIGNMENT The Design stands in the name of MOTOROLA, INC. registered under the Designs Act, 2000 has been assigned in the Register of Design in the name as follows:- Design No. Class Name , , , , MOTOROLA MOBILITY, INC. OF, 600 NORTH US HIGHWAY 45, LIBERTYVILLE, IL 60048, USA, A DELAWARE CORPORATION 23552
5 OF DESIGNS The following designs have been registered. They are now open for public inspection. In the following each entry the Date of Registration is shown. The Priority Number, Priority Date and Priority Country are also shown DESIGN NUMBER CLASS )NANO THERAPEUTICS PRIVATE LIMITED PLOT NO. D-54/2, ROAD NO.23, HOJIWALA INDUSTRIAL ESTATE, SACHIN PALSANA HIGHWAY, SURAT , GUJARAT, INDIA 14/12/2011 CORONARY STENT SYSTEM NA DESIGN NUMBER CLASS )FORD GLOBAL TECHNOLOGIES LLC SUITE 800, 330 TOWN CENTER DRIVE, DEARBORN MICHIGAN, UNITED STATES OF AMERICA /02/2012 VEHICLE WHEEL /08/2011 CHINA DESIGN NUMBER CLASS )TOYOTA JIDOSHA KABUSHIKI KAISHA 1, TOYOTA-CHO, TOYOTA-SHI, AICHI-KEN, , JAPAN 27/02/2012 AUTOMOBILE 29/402, /09/2011 U.S.A
6 DESIGN NUMBER CLASS )LG HAUSYS, LTD. 20, YEOUIDO-DONG, YEONGDEUNGPO-GU, SEOUL , REPUBLIC OF KOREA 25/01/2012 SHEET FOR VEHICLE SEATS KR /08/2011 REPUBLIC OF KOREA DESIGN NUMBER CLASS )MASCO CORPORATION OF INDIANA 55 EAST 111TH STREET, INDIANAPOLIS, INDIANA /01/2012 TISSUE HOLDER 29/400, /08/2011 U.S.A. DESIGN NUMBER CLASS )JOSEPH VÃ GELE AG JOSEPH-VÃ GELE-STRASSE 1, LUDWIGSHAFEN/RHEIN, GERMANY 31/01/2012 CONTROL PANEL FOR VEHICLE /08/2011 EUROPEAN UNION 23554
7 DESIGN NUMBER CLASS )SOFIC OF 3 RUE JEAN-JACQUES ROUSSEAU, AUSSILLON, MAZAMET, FRANCE; NATIONALITY: FRENCH 03/05/2012 SAFETY SYRINGE NA DESIGN NUMBER CLASS )GLEN APPLIANCES PVT. LTD., 134 DLF INDUSTRIAL AREA PHASE 1, FARIDABAD, HARYANA, INDIA 29/11/2011 JUICER NA DESIGN NUMBER CLASS )SHREE MAHAVIR METALCRAFT PVT. LTD. PLOT NO. 3059, GIDC, PHASE III, DARED JAMNAGAR, GUJARAT, PIN , INDIA 16/02/2012 HANDLE NA 23555
8 DESIGN NUMBER CLASS )MEMMINGER-IRO GMBH, OF JAKOB-MUTZ-STR. 7, D-72280, DORNSTETTEN, GERMANY, A GERMAN COMPANY 02/07/2007 YARN FEEDING APPARATUS /07/2007 GERMANY DESIGN NUMBER CLASS )SHEROMANI TRADERS PVT. LTD., 14/44, WEST PUNJABI BAGH, NEW DELHI , (INDIA), (AN INDIAN COMPANY DULY REGISTERED UNDER THE COMPANIES ACT, 1956) 07/05/2012 WHEEL RIM NA DESIGN NUMBER CLASS )YADAV, RAKESH; AN INDIAN NATIONAL, OF THE ADDRESS: AQUALIFE HOUSE, NEAR SHEETLA MATA MANDIR, SECTOR -5, ROAD, GURGAON , HARYANA, INDIA 28/05/2012 BOTTLE NA 23556
9 DESIGN NUMBER CLASS )HEMRAJ INDUSTRIES PRIVATE LIMITED 46B, 1ST FLOOR, RAFI AHMED KIDWAI ROAD, KOLKATA /03/2012 BOTTLE NA DESIGN NUMBER CLASS )TOYOTA JIDOSHA KABUSHIKI KAISHA 1, TOYOTA-CHO, TOYOTA-SHI, AICHI-KEN, , JAPAN 26/12/2011 AUTOMOBILE 29/397, /07/2011 U.S.A. DESIGN NUMBER CLASS )CROSS FLOW (INDIA) PLOT NO. 139, GALI NO.-2, 16/5 MATHURA ROAD, KARKHANA BAGH, OLD FARIDABAD, HARYANA , INDIA 09/04/2012 FLY CATCHER MACHINE NA 23557
10 DESIGN NUMBER CLASS )SONAL PLASTICS K-78/79, OLD SONAL HEAVY INDUSTRIAL ESTATE, RAMCHANDRA LANE EXTENSION, KANCHPADA, MALAD WEST, MUMBAI , MAHARASHTRA, INDIA 16/04/2012 FRUIT BASKET NA DESIGN NUMBER CLASS )KETAN C. MEHTA 4077, POLLED HEREFORD DRIVE, SANTA ROSA, CA 95404, USA 16/01/2012 AMPOULE WITH A TRANSLUCENT STRUCTURE 13/183, /07/2011 U.S.A. DESIGN NUMBER CLASS )PHILIPS ELECTRONICS INDIA LIMITED DLF-9B, 9TH FLOOR, DLF CYBER CITY, DLF PHASE 3, GURGAON , INDIA 20/01/2012 LED BATTEN NA 23558
11 DESIGN NUMBER CLASS )UMA PLASTICS LIMITED 14B CAMAC STREET, 3RD FLOOR, SUITE NO. 3D, KOLKATA , WEST BENGAL, INDIA 04/04/2012 CHAIR NA DESIGN NUMBER CLASS )TOYOTA JIDOSHA KABUSHIKI KAISHA 1, TOYOTA-CHO, TOYOTA-SHI, AICHI-KEN, , JAPAN 27/02/2012 AUTOMOBILE 29/402, /09/2011 U.S.A. DESIGN NUMBER CLASS )SANFORD, L.P., AN ILLINOIS LIMITED PARTNERSHIP OF 29 EAST STEPHENSON STREET, FREEPORT, ILLINOIS 61032, USA 11/04/2006 WRITING INSTRUMENT 29/257,844 11/04/2006 U.S.A
12 DESIGN NUMBER CLASS )GE HEALTHCARE UK LIMITED AMERSHAM PLACE, LITTLE CHALFONT, BUCKINGHAMSHIRE HP7 9NA, UNITED KNIGDOM 27/01/2012 MULTI SAMPLE COMPRESSOR /07/2011 OHIM DESIGN NUMBER CLASS )JOSEPH S. KANFER, A U.S. CITIZEN, AT 4445 EVEREST ROAD, RICHFIELD, OHIO 44286, UNITED STATES OF AMERICA 28/02/2006 DISPENSER 29/254,697 28/02/2006 U.S.A. DESIGN NUMBER CLASS )GS YUASA INTERNATIONAL LTD., 1, INOBABA-CHO, NISHINOSHO, KISSHOIN, MINAMI-KU, KYOTO- SHI, KYOTO , JAPAN 02/12/2011 STORAGE BATTERY /06/2011 JAPAN 23560
13 DESIGN NUMBER CLASS )SATA GMBH & CO. KG DOMERTALSTRASSE 20, KORNWESTHEIM, GERMANY 13/02/2012 PROTECTIVE SUIT (SET) /08/2011 GERMANY DESIGN NUMBER CLASS )JCB IINDIA LIMITED B-1/1-1, 2ND FLOOR, MOHAN CO-OPERATIVE INDUSTRIAL ESTATE, MATHURA ROAD, NEW DELHI, INDIA 28/12/2011 BACKHOE LOADER NA DESIGN NUMBER CLASS )M/S. FNS INTERNATIONAL PVT. LTD., ITL TWIN TOWER, B-09, 313, 3RD FLOOR, NETAJI SUBHASH PALACE, PITAMPURA, DELHI (INDIA) 30/12/2011 SPOON NA 23561
14 DESIGN NUMBER CLASS )RESEARCH IN MOTION LIMITED, A CANADIAN CORPORATION OF, 295 PHILLIP STREET, WATERLOO, ONTARIO N2L 3W8, CANADA 21/09/2007 HANDHELD ELECTRONIC DEVICE 29/295,198 21/09/2007 U.S.A. DESIGN NUMBER CLASS )TOYOTA JIDOSHA KABUSHIKI KAISHA 1, TOYOTA-CHO, TOYOTA-SHI, AICHI-KEN, , JAPAN 26/12/2011 AUTOMOBILE 29/397, /07/2011 U.S.A. DESIGN NUMBER CLASS )NIFCO INC , MAIOKA-CHO, TOTSUKA-KU, YOKOHAMA-SHI, KANAGAWA , JAPAN 24/02/2012 PULLEY FOR ACCELERATOR WIRE IN MOTORCYCLE /08/2011 JAPAN 23562
15 DESIGN NUMBER CLASS )PREETHI KITCHEN APPLIANCES PRIVATE LIMITED TECHNOPOLIS KNOWLEDGE PARK, MAHAKALI CAVES ROAD, CHAKALA, ANDHERI (E), MUMBAI , INDIA 27/02/2012 FOOD PROCESSOR NA DESIGN NUMBER CLASS )SATISH CHANDRAKANT PATHARE DHRUV HEIGHTS CHS, FLAT NO. 101, A-WING, UPPER GOVIND NAGAR, MALAD (EAST), MUMBAI , MAHARASHTRA, INDIA 28/07/2011 CONTAINER NA DESIGN NUMBER CLASS )M/S. VIMAL APPLIANCES E/703, JYOTI ARCH,S.V. ROAD, KANDIVALI-WEST, MUMBAI , INDIA 24/11/2011 MIXER JAR NA 23563
16 DESIGN NUMBER CLASS )MACIEJ SZYMANSKI NAPACHANIE, UL. LESNA 5, ROKIETNICA , POLAND., 28/11/2011 SEAT FOR VEHICLES /06/2011 OHIM DESIGN NUMBER CLASS )JOSEPH VÃ GELE AG JOSEPH-VÃ GELE-STRASSE 1, LUDWIGSHAFEN/RHEIN, GERMANY 31/01/2012 CONTROL PANEL FOR VEHICLE /08/2011 EUROPEAN UNION DESIGN NUMBER CLASS )M. K. FOOTWEARS, C-18, SPORTS AND SURGICAL COMPLEX, BASTI BAWA KHEL, KAPURTHALA ROAD, JALANDHAR, PIN-14402, (PUNJAB), INDIA, AN INDIAN PROPRIETORSHIP FIRM WHOSE PROPRIETOR IS SUNIL KUMAR MALHOTRA BEING INDIAN NATIONALS OF THE ABOVE ADDRESS 01/05/2012 TYRE FOR BICYCLE NA 23564
17 DESIGN NUMBER CLASS )COLGATE-PALMOLIVE COMPANY 300 PARK AVENUE, NEW YORK 10022, USA 13/02/2012 ORAL CARE IMPLEMENT ACCESSORY 29/400, /08/2011 U.S.A. DESIGN NUMBER CLASS )TOYOTA JIDOSHA KABUSHIKI KAISHA 1, TOYOTA-CHO, TOYOTA-SHI, AICHI-KEN, , JAPAN 15/02/2012 AUTOMOBILE /08/2011 CHINA DESIGN NUMBER CLASS )PLANTRONICS INC. 345 ENCINAL STREET, SANTA CRUZ, CALIFORNIA 95060, USA 21/02/2012 BASE CRADLE FOR A COMMUNICATIONS HEADSET 29/401, /09/2011 U.S.A
18 DESIGN NUMBER CLASS )JOHNSON & JOHNSON IND. E COM. LTDA, OF RODOVIA PRESIDENTE DUTRA, KM-154, SAO JOSE DOS CAMPOS, SAO PAULO CEP BRAZIL, A BRAZILIAN COMPANY 09/06/2008 EMBOSSED SANITARY ARTICLE 29/ /06/2008 U.S.A. DESIGN NUMBER CLASS )M/S. CELLO PLASTOTECH 5, VAKIL INDUSTRIAL ESTATE, WALBHAT ROAD, GOREGAON(EAST), MUMBAI , MAHARASHTRA, INDIA 09/03/2012 BOTTLE NA DESIGN NUMBER CLASS )LG ELECTRONICS INC. 20 YEOUIDO - DONG, YEONGDEUNGPO - GU, SEOUL , REPUBLIC OF KOREA A CORPORATION UNDER THE LAWS OF THE REPUBLIC OF KOREA 11/05/2012 WATER PURIFIER WITH ICE DISPENSER /11/2011 REPUBLIC OF KOREA 23566
19 DESIGN NUMBER CLASS )M/S SANVI ENTERPRISE GONDAL ROAD, HIGHWAY (N.H. 8-B), B/H, SAURASHTRA, SOLVENT, NR. DHOKIYA MOTORS, (KOTHARIYA), RAJKOT, GUJARAT, INDIA 06/03/2012 HANDLE NA DESIGN NUMBER CLASS )K. MAHESHKUMAR INDUSTRIES PRIVATE LIMITED, HAVING PRINCIPAL PLACE OF BUSINESS AT HASEJAA HOUSE, OPPOSITE MASKATI MARKET, SAKAR BAZAR, KALUPUR, AHMEDABAD , GUJARAT, INDIA NA 25/05/2012 HANGER DESIGN NUMBER CLASS )CARTIER CREATION STUDIO SA 8 BOULEVARD JAMES FAZY, CH GENEVE, SWITZERLAND 02/01/2012 PENDANT NÂ DM/ /07/2011 WIPO 23567
20 DESIGN NUMBER CLASS )PREETHI KITCHEN APPLIANCES PRIVATE LIMITED TECHNOPOLIS KNOWLEDGE PARK, MAHAKALI CAVES ROAD, CHAKALA, ANDHERI-EAST, MUMBAI , INDIA 07/09/2011 BASE UNIT OF A MIXER GRINDER NA DESIGN NUMBER CLASS )SIEMENS AKTIENGESELLSCHAFT WITTELSBACHERPLATZ 2, MUNCHEN, GERMANY 20/12/2011 COVER FOR SWITCHGEAR EU /07/2011 OHIM DESIGN NUMBER CLASS )SAJIDKHAN KHUDBUDDIN KORABU A/P UGHADEWADI, TAL MALSHIRAS, DIST. SOLAPUR, MAH, PIN , INDIAN 02/02/2012 DOUBLE PUMP OPEN WELL SUBMERSIBLE NA 23568
21 DESIGN NUMBER CLASS )PREETHI KITCHEN APPLIANCES PRIVATE LIMITED TECHNPOLIS KNOWLEDGE PARK, MAHAKALI CAVES, ROAD, CHAKALA, ANDHERI-EAST, MUMBAI , INDIA 27/02/2012 FOOD PROCESSOR NA DESIGN NUMBER CLASS )BRIDGESTONE CORPORATION 10-1, KYOBASHI 1-CHOME, CHUO-KU, TOKYO , JAPAN 25/01/2012 TIRE TREAD JP /07/2011 JAPAN DESIGN NUMBER CLASS )SYNGENTA PARTICIPATIONS AG SCHWARZWALDALLEE 215, BASEL, SWITZERLAND, CH-4058., 01/12/2011 CONTAINER NA 23569
22 DESIGN NUMBER CLASS )APTARGROUP, INC. 475 WEST TERRA COTTA, SUITE E, CRYSTAL LAKE, ILLINOIS , UNITED STATES OF AMERICA 13/02/2012 CLOSURE 29/403, /10/2011 U.S.A. DESIGN NUMBER CLASS )TOYOTA JIDOSHA KABUSHIKI KAISHA 1, TOYOTA-CHO, TOYOTA-SHI, AICHI-KEN, , JAPAN 15/02/2012 AUTOMOBILE X 19/08/2011 CHINA DESIGN NUMBER CLASS )THE PROCTER & GAMBLE COMPANY ONE PROCTER & GAMBLE PLAZA, CINCINNATI, OHIO-45202, UNITED STATES OF AMERICA 30/09/2011 BOX /04/2011 WIPO 23570
23 DESIGN NUMBER CLASS )SHEROMANI TRADERS PVT. LTD., 14/44, WEST PUNJABI BAGH, NEW DELHI , (INDIA), (AN INDIAN COMPANY DULY REGISTERED UNDER THE COMPANIES ACT, 1956) 07/05/2012 WHEEL RIM NA DESIGN NUMBER CLASS )CARTIER CREATION STUDIO SA 8 BOULEVARD JAMES FAZY, CH GENEVE, SWITZERLAND 02/01/2012 EARRING NÂ DM/ /07/2011 WIPO DESIGN NUMBER CLASS )THE GILLETTE COMPANY IP/LEGAL PATENT DEPARTMENT - 3E, ONE GILLETTE PARK, BOSTON, 02127, UNITED STATES OF AMERICA 29/03/2012 SHAVING RAZOR CARTRIDGE 29/403, /09/2011 U.S.A
24 DESIGN NUMBER CLASS )PREETHI KITCHEN APPLIANCES PRIVATE LIMITED TECHNPOLIS KNOWLEDGE PARK, MAHAKALI CAVE, ROAD, CHAKALA, ANDHERI-EAST, MUMBAI , INDIA 07/09/2011 JAR OF A MIXER GRINDER NA DESIGN NUMBER CLASS )JOSEPH VÃ GELE AG JOSEPH-VÃ GELE-STRASSE 1, LUDWIGSHAFEN/RHEIN, GERMANY 31/01/2012 SIDE PANEL PART FOR VEHICLE /08/2011 EUROPEAN UNION DESIGN NUMBER CLASS )RISHABH INSTRUMENTS PVT. LTD. F: 31, M.I.D.C., SATPUR, NASHIK , MAHARASHTRA, INDIA 16/04/2012 MULTIMETER NA 23572
25 DESIGN NUMBER CLASS )PREETHI KITCHEN APPLIANCES PRIVATE LIMITED TECHNOPOLIS KNOWLEDGE PARK, MAHAKALI CAVES ROAD, CHAKALA, ANDHERI (E), MUMBAI , INDIA 27/02/2012 JAR OF A FOOD PROCESSOR NA DESIGN NUMBER CLASS )DURON ENERGY PVT. LTD. 3RD FLOOR, #50, ZATAKIA CENTRE, 100 FEET ROAD, INDIRANAGAR, BENGALURU , INDIA 26/04/2012 BATTERIES NA DESIGN NUMBER CLASS )CLIPSCO INDIA 147/1B, M. G. ROAD, KOLKATA , WEST BENGAL, INDIA 27/04/2012 ELECTRONIC CHOKE NA 23573
26 DESIGN NUMBER CLASS )ALFA LAVAL CORPORATE AB BOX 73, SE LUND, SWEDEN 27/04/2012 DEVICE FOR CLEANING TANKS /01/2012 OHIM DESIGN NUMBER CLASS )HITACHI LTD. 6-6, MARUNOUCHI 1-CHOME, CHIYODA-KU, TOKYO, JAPAN 20/01/2012 LIGHTING FIXTURE /07/2011 JAPAN DESIGN NUMBER CLASS )CARLSBERG BREWERIES A/S NY CARLSBERG VEJ 100, 1799 COPENHAGEN V, DENMARK 30/03/2012 BOTTLE /03/2012 OHIM 23574
27 DESIGN NUMBER CLASS )HINDUSTAN UNILEVER LIMITED UNILEVER HOUSE, B. D. SAWANT MARG, CHAKALA, ANDHERI (EAST), MUMBAI , MAHARASHTRA, INDIA 03/04/2012 JAR /10/2011 OHIM DESIGN NUMBER CLASS )TOYOTA JIDOSHA KABUSHIKI KAISHA 1, TOYOTA-CHO, TOYOTA-SHI, AICHI-KEN, , JAPAN 25/01/2012 AUTOMOBILE JPD /09/2011 JAPAN DESIGN NUMBER CLASS )M. K. FOOTWEARS, C-18, SPORTS AND SURGICAL COMPLEX, BASTI BAWA KHEL, KAPURTHALA ROAD, JALANDHAR, PIN-14402, (PUNJAB), INDIA, AN INDIAN PROPRIETORSHIP FIRM WHOSE PROPRIETOR IS SUNIL KUMAR MALHOTRA BEING INDIAN NATIONALS OF THE ABOVE ADDRESS 01/05/2012 TYRE FOR BICYCLE NA 23575
28 DESIGN NUMBER CLASS )SUBTRONICS (INDIA) PRIVATE LIMITED, A COMPANY REGISTERED IN INDIA, HAVING ITS REGISTERED OFFICE AT 147, KALIANDAS UDYOG BHAVAN, NEAR CENTURY BAZAR, PRABHADEVI, MUMBAI , STATE OF MAHARASHTRA, INDIA, OF ABOVE ADDRESS 04/05/2012 BREATH ALCOHOL ANALYSER NA DESIGN NUMBER CLASS )COLGATE-PALMOLIVE COMPANY 300 PARK AVENUE, NEW YORK 10022, USA 13/02/2012 ORAL CARE IMPLEMENT ACCESSORY 29/400, /08/2011 U.S.A. DESIGN NUMBER CLASS )HERO MOTOCORP LIMITED 34, COMMUNITY CENTRE, BASANT LOK, VASANT VIHAR, NEW DELHI , INDIA 15/02/2012 LUGGAGE CARRIER NA 23576
29 DESIGN NUMBER CLASS )CHEMCO PLAST 12, GANESHKRIPA CHS LTD., BEHIND RAJENDRA PARK, STATION ROAD, GOREGAON (WEST), MUMBAI , MAHARASHTRA, INDIA 21/02/2012 CONTAINER CAP NA DESIGN NUMBER CLASS )K & LAP CO., LTD. 4 FL., POLIKEM BLDG., GWANYANG-DONG, 374, SIMIN-DAERO, ANYANG SI DONGAN-GU, GYEONGGI-DO, , REPUBLIC OF KOREA 22/02/2012 LID OF CUP /08/2011 REPUBLIC OF KOREA DESIGN NUMBER CLASS )JOHNSON & JOHNSON IND. E COM. LTDA, OF RODOVIA PRESIDENTE DUTRA, KM-154, SAO JOSE DOS CAMPOS, SAO PAULO CEP BRAZIL, A BRAZILIAN COMPANY 09/06/2008 EMBOSSED SANITARY ARTICLE 29/ /06/2008 U.S.A
30 DESIGN NUMBER CLASS )PEARL POLYMERS LIMITED 204, ROHIT HOUSE, 3, TOLSTOY MARG, NEW DELHI , INDIA 13/03/2012 JAR NA DESIGN NUMBER CLASS )PANASONIC CORPORATION 1006, OAZA KADOMA, KADOMA-SHI, OSAKA , JAPAN 15/03/2012 OUTLET FOR SUPPLYING ELECTRIC POWER /09/2011 JAPAN DESIGN NUMBER CLASS )M. K. FOOTWEARS, C-18, SPORTS AND SURGICAL COMPLEX, BASTI BAWA KHEL, KAPURTHALA ROAD, JALANDHAR, PIN , (PUNJAB), INDIA, AN INDIAN PROPRIETORSHIP FIRM WHOSE PROPRIETOR IS SUNIL KUMAR MALHOTRA BEING INDIAN NATIONALS OF THE ABOVE ADDRESS 07/05/2012 TYRE FOR BICYCLE NA 23578
31 DESIGN NUMBER CLASS )ORIENT PAPER & INDUSTRIES LIMITED UNIT - VIII, PLOT NO. 7, BHOINAGAR, BHUBANESHWAR (ORISSA)., INDIA 12/07/2011 MIXER GRINDER NA DESIGN NUMBER CLASS )EQUALIZER INTERNATIONAL LIMITED EQUALIZER HOUSE, CLAYMORE DRIVE, ABERDEEN SCIENCE & ENERGY PARK, BRIDGE OF DON, ABERDEEN, AB23 8 GD 02/03/2012 FLANGE ALIGNMENT DEVICE /09/2011 OHIM DESIGN NUMBER CLASS )WHIRLPOOL OF INDIA LIMITED Â WHIRLPOOL HOUSEÂ, PLOT NO. 40, SECTOR-44, GURGAON , HARYANA, INDIA 09/03/2012 REFRIGERATOR NA 23579
32 DESIGN NUMBER CLASS )MEENABEN NILESHBHAI SHAH A1/4/2, OCEAN PARK, S. M. ROAD, NR. NEHRU NAGAR CIRCLE, SATELLITE ROAD, AHMEDABAD , GUJARAT - INDIA 02/01/2012 COMMODE SEAT NA DESIGN NUMBER CLASS )PIONEER METAL 1/8, RAMNAGAR, 80 FEET ROAD, B/H K. RASHIKLAL, RAJKOT , GUJARAT, INDIA 22/03/2012 HANDLE NA DESIGN NUMBER CLASS )LEGO A/S AASTVEJ 1, DK-7190 BILLUND, DENMARK 23/12/2011 BUILDING BLOCK OF TOYS DM/ /06/2011 WIPO 23580
33 DESIGN NUMBER CLASS )PREETHI KITCHEN APPLIANCES PRIVATE LIMITED TECHNOPOLIS KNOWLEDGE PARK, MAHAKALI CAVES ROAD, CHAKALA, ANDHERI (EAST), MUMBAI , INDIA 27/02/2012 JAR OF A FOOD PROCESSOR NA DESIGN NUMBER CLASS )ALFA LAVAL CORPORATE AB BOX 73, SE LUND, SWEDEN 27/04/2012 DEVICE FOR CLEANING TANKS /01/2012 OHIM DESIGN NUMBER CLASS )THERMO ELECTRON SCIENTIFIC INSTRUMENTS LLC 5225 VERONA ROAD, MADISON, WISCONSIN 53711, USA 20/01/2012 SPECTROMETER 29/397, /07/2011 U.S.A
34 DESIGN NUMBER CLASS )SANFORD, L.P., AN ILLINOIS LIMITED PARTNERSHIP OF 29 EAST STEPHENSON STREET, FREEPORT, ILLINOIS 61032, USA 11/04/2006 WRITING INSTRUMENT 29/257,844 11/04/2006 U.S.A. DESIGN NUMBER CLASS )PININFARINA S.P.A. VIA BRUNO BUOZZI, 6, TORINO, , ITALY 27/01/2012 CAR /07/2011 OHIM DESIGN NUMBER CLASS )RIPEN GUPTA 170/3, HSIDC INDUSTRIAL AREA, NAMASTEY CHOWK, KARNAL, HARYANA, INDIA 30/04/2012 SWITCH NA 23582
35 DESIGN NUMBER CLASS )SUBTRONICS (INDIA) PRIVATE LIMITED, A COMPANY REGISTERED IN INDIA, HAVING ITS REGISTERED OFFICE AT 147, KALIANDAS UDYOG BHAVAN, NEAR CENTURY BAZAR, PRABHADEVI, MUMBAI , STATE OF MAHARASHTRA, INDIA, OF ABOVE ADDRESS 04/05/2012 BREATH ALCOHOL ANALYSER NA DESIGN NUMBER CLASS )FRENCH COSMETICS PVT LTD. AN INDIAN NATIONAL COMPANY INCORPORATED UNDER THE COMPANIES ACT 1956 BARODA-JAMBUSAR N. HIGH WAY ROAD, AT & PO. DABHASA, TA. PADRA , DIST. BARODA (GUJARAT), INDIA 17/10/2006 CONTAINER NA DESIGN NUMBER CLASS )NOKIA CORPORATION KEILALAHDENTIE 4, ESPOO, FIN-02150, FINLAND 07/12/2011 MOBILE PHONE 29/ /08/2011 U.S.A
36 DESIGN NUMBER CLASS )CHEMCO PLAST 12, GANESHKRIPA CHS LTD., BEHIND RAJENDRA PARK, STATION ROAD, GOREGAON (WEST), MUMBAI , MAHARASHTRA, INDIA 21/02/2012 CONTAINER CAP NA DESIGN NUMBER CLASS )RADICO KHAITAN LIMITED PLOT NO. J-1, BLOCK B-1, MOHAN CO-OP INDUSTRIAL AREA, MATHURA ROAD, NEW DELHI , INDIA 09/03/2012 BOTTLE NA DESIGN NUMBER CLASS )BAJAJ ELECTRICALS LIMITED 45/47, VEER NARIMAN ROAD, MUMBAI , MAHARASHTRA, INDIA 09/04/2012 AIR COOLER NA 23584
37 DESIGN NUMBER CLASS )VALEO JAPAN CO., LTD. 39, AZA-HIGASHIHARA, SENDAI, KUMAGAYA-SHI, SAITAMA, , JAPAN 20/04/2012 ROTOR FOR COMPRESSOR NA DESIGN NUMBER CLASS )FREEMANÂ S MEASURES PRIVATE LIMITED G. T. ROAD, JUGIANA, LUDHIANA , PUNJAB, INDIA 04/04/2012 MEASURING TAPE NA DESIGN NUMBER CLASS )LG HAUSYS, LTD. 20, YEOUIDO-DONG, YEONGDEUNGPO-GU, SEOUL , REPUBLIC OF KOREA 25/01/2012 SHEET FOR VEHICLE SEATS KR /08/2011 REPUBLIC OF KOREA 23585
38 DESIGN NUMBER CLASS )MASCO CORPORATION OF INDIANA 55 EAST 111TH STREET, INDIANAPOLIS, INDIANA /01/2012 TRASH CAN 29/400, /08/2011 U.S.A. DESIGN NUMBER CLASS )NINTENDO CO., LTD., 11-1 KAMITOBA HOKOTATE-CHO, MINAMI-KU, KYOTO, JAPAN 02/12/2011 ELECTRONIC COMPUTER /06/2011 JAPAN DESIGN NUMBER CLASS )SHREE MAHAVIR METALCRAFT PVT. LTD. PLOT NO. 3059, GIDC, PHASE III, DARED JAMNAGAR, GUJARAT, PIN , INDIA 16/02/2012 HANDLE NA 23586
39 DESIGN NUMBER CLASS )MEMMINGER-IRO GMBH, OF JAKOB-MUTZ-STR. 7, D-72280, DORNSTETTEN, GERMANY, A GERMAN COMPANY 02/07/2007 HOLDER OF YARN FEEDING APPARATUS /07/2007 GERMANY DESIGN NUMBER CLASS )B.N.K. PLASTIC 14/21, SAHIBABAD INDUSTRIAL AREA, SITE-4, GHAZIABAD, U.P., INDIA 20/03/2012 TORCH NA DESIGN NUMBER CLASS )SHEROMANI TRADERS PVT. LTD., 14/44, WEST PUNJABI BAGH, NEW DELHI , (INDIA), (AN INDIAN COMPANY DULY REGISTERED UNDER THE COMPANIES ACT, 1956) 07/05/2012 WHEEL RIM NA 23587
40 DESIGN NUMBER CLASS )HAVELLS INDIA LIMITED, AN INDIAN COMPANY, OF 1/7, RAM KISHORE ROAD, CIVIL LINES, DELHI , INDIA 10/05/2012 LIGHTING FIXTURE NA DESIGN NUMBER CLASS )SMC KABUSHIKI KAISHA AKIHABARA UDX 15F, , SOTOKANDA, CHIYODA-KU, TOKYO , JAPAN 04/01/2012 RODLESS CYLINDER /07/2011 JAPAN DESIGN NUMBER CLASS )EMA LUBES (PRIVATE) LIMITED 4-5-6, KHANNA WAREHOUSE, NASIK PHATA, KASARWADI, PUNE , MAHARASHTRA, INDIA 11/04/2012 CAN NA 23588
41 DESIGN NUMBER CLASS )HONDA MOTOR CO. LTD. 1-1, MINAMIAOYAMA 2-CHOME, MINATO-KU, TOKYO, JAPAN 20/04/2012 MOTOR SCOOTER /10/2011 JAPAN DESIGN NUMBER CLASS )HINDUSTAN CONSTRUCTION CORPORATION, A PROPRIETORY FIRM OF D-12 (BASEMENT), PANCHSHEEL ENCLAVE, NEW DELHI , INDIA NA 29/05/2006 PREFABRICATED BUS SHELTER DESIGN NUMBER CLASS )MASCO CORPORATION OF INDIANA 55 EAST 111TH STREET, INDIANAPOLIS, INDIANA /01/2012 FAUCET 29/400, /08/2011 U.S.A
42 DESIGN NUMBER CLASS )SOCIETE DE TECHNOLOGIE MICHELIN 23, RUE BRESCHET-63000, CLERMONT-FERRAND, FRANCE 07/12/2011 TYRE 11/ /06/2011 FRANCE DESIGN NUMBER CLASS )SATA GMBH & CO. KG DOMERTALSTRASSE 20, KORNWESTHEIM, GERMANY 13/02/2012 PROTECTIVE SUIT /08/2011 GERMANY DESIGN NUMBER CLASS )ELEGANZA JEWELLERY LTD. 102/103, SDF IV, S.E.E.P.Z., ANDHERI (E), MUMBAI , MAHARASHTRA, INDIA 20/03/2012 DIAMOND JEWELRY NA 23590
43 DESIGN NUMBER CLASS )SHEROMANI TRADERS PVT. LTD., 14/44, WEST PUNJABI BAGH, NEW DELHI , (INDIA), (AN INDIAN COMPANY DULY REGISTERED UNDER THE COMPANIES ACT, 1956) 07/05/2012 WHEEL RIM NA DESIGN NUMBER CLASS )SKI PLASTOWARE PVT. LTD. A-8, MINERVA IND. ESTATE, OPP. ASHA NAGAR, NEAR P & T COLONY, NEXT TO VICTORIA CLASSIC, MULUND(WEST), MUMBAI , MAHARASHTRA, INDIA 02/03/2012 JUG WITH HANDLE NA DESIGN NUMBER CLASS )TATA MOTORS LIMITED BOMBAY HOUSE, 24 HOMI MODY STREET, HUTATMA CHOWK, MUMBAI , INDIA 02/01/2012 NA FLOOR CONSOLE OF A VEHICLE WITH CYLINDER TRIMS 23591
44 DESIGN NUMBER CLASS )THE GILLETTE COMPANY IP/LEGAL PATENT DEPARTMENT - 3E, ONE GILLETTE PARK, BOSTON, 02127, UNITED STATES OF AMERICA 29/03/2012 SHAVING RAZOR HANDLE 29/403, /09/2011 U.S.A. DESIGN NUMBER CLASS )KHAITAN (INDIA) LIMITED 46C, JAWAHAR LAL NEHRU ROAD, KOLKATA , WEST BENGAL, INDIA 19/12/2011 CEILING FAN NA DESIGN NUMBER CLASS )HINDUSTAN UNILEVER LIMITED HINDUSTAN LEVER HOUSE BACKBAY RECLAMATION, MUMBAI , STATE OF MAHARASHTRA, INDIA 23/12/2011 BOTTLE /07/2011 OHIM 23592
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 2
CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 2 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 3 INTRODUCTION
CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 3 INTRODUCTION
CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 2
CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 3
CONTINUED FROM PART 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 2
CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in
More information10LF and 12LF Series Right Angle Grinders
Product Manual 10LF and 12LF Series Right Angle Grinders XX L F 2 XX - XX Tool Series 10 = Aluminum Housing 12 = Ergo Housing Throttle Type L = Locking Lever Motor Size F = 0.4 hp Handle Style 2 = Right
More informationParts Manual PL EN 05/19/ L4321 Router. For additional product information visit our website at
Parts Manual 10L4321 Router For additional product information visit our website at http://www.apextoolgroup.com Product Information The original language of this manual is English. Product Safety Information:
More informationCONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationAiretool. Gas Line Cleaners Range: 3/4 (19.05mm) to 1-1/2 (38.10mm) Operating & Service Manual PL EN 10/01/2015
Operating & Service Manual PL9-6026EN 0/0/205 Airetool Gas Line Cleaners Range: 3/4 (9.05mm) to -/2 (38.0mm) For additional product information visit our website at http://www.apextoolgroup.com PL9-6026EN
More informationCONTINUED FROM PART-1
CONTINUED FROM PART-1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More information10N M6 Series Right Angle Grinder
Parts Manual PL30-2042EN 10N1200-36M6 Series Right Angle Grinder For additional product information visit our website at http://www.apextoolgroup.com PL30-2042EN Dotco Nomenclature and Specifications Product
More informationParts Manual EN PL30-12R04 07/21/ R04 Series 0.1 HP Inline Pencil Grinder
Parts Manual PL30-12R04 12R04 Series 0.1 HP Inline Pencil Grinder For additional product information visit our website at http://www.apextoolgroup.com Dotco Nomenclature 12 R 04 XX - X X Series 12 = Ergo
More informationSetting a New Standard in Emission Testing MOTOR EXHAUST GAS ANALYZER TEST SYSTEM CONCEPT MEXA-ONE offers an intuitive user interface with a highly efficient hardware and software design. This results in
More information15K Series Extented Mini Right Angle Drill Attachment
Parts Manual PL30-2052EN 15K27-5172 Series Extented Mini Right Angle Drill Attachment For additional product information visit our website at http://www.apextoolgroup.com PL30-2052EN Dotco Nomenclature
More information10N10 Series Inline Grinder
Parts Manual 0N0 Series Inline Grinder For additional product information visit our website at http://www.apextoolgroup.com Nomenclature and Specifications Product Type 0 = Aluminum Housing Grinder Throttle
More informationHORIBA Jobin Yvon GmbH HORIBA Vietnam Company Limite ted Hea d Offi ce HORIBA ITALIA Srl Mil ano Office HORIBA Korea Ltd. Seoul Branch HORIBA Instruments Inc. Edison office HORIBA FRANCE SAS HORIBA India
More informationCONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More information(a) Name of Company : SHREE RANGAVADHUT ENGINEERS
SHREE RANGAVADHUT ENGINEERS No. 8, 1 st Floor, Dhamanwala Service Complex, Opp. S.B.I., G.I.D.C., PANDESARA, Surat-394 221. Tele : 0261-2891016 e-mail : info@srae.co.in / shreerangavadhut2003@yahoo.co.in
More information10LF and 12LF Series Right Angle Grinder and Sander
Product Manual 4-842EN 10LF and LF Series Right Angle Grinder and Sander For additional product information visit our website at http://www.apextoolgroup.com 4-842EN Dotco Nomenclature XX L F 2 XX - XX
More informationCONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationN60 Rotary Vane Pneumatic Motor
Parts Manual PL70-1043EN 24-1312N60 Rotary Vane Pneumatic Motor For additional product information visit our website at http://www.apextoolgroup.com PL70-1043EN Cleco 24-1312N60 Rotary Vane Motor Model
More informationParts Manual EN
Parts Manual 45-8213EN PL30-1212 12L12 and 12S12 Series 0.3 HP Right Angle Grinder/Sander For additional product information visit our website at http://www.apextoolgroup.com 45-8213EN Dotco Nomenclature
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationNEW! Ultra EC Motors. Ultra performance in a complete family of brushless slotless miniature motors.
NEW! Ultra EC Motors Ultra performance in a complete family of brushless slotless miniature motors. No two applications are the same. One design definitely does not fit all. Not when your application has
More informationAUTHORITY FOR ADVANCE RULINGS (INCOME TAX)
DATE: 26.12.2016 (Monday) 1 AAR/971/2010 LG Electronics India Pvt. Ltd.,Greater Noida (UP) S245R(2) CIT (IT), Noida 2 AAR/1064/2011 The Goodyear Tire & Rubber Company, USA S245R(2) CIT(IT) - 2, ND 3 AAR/1214/2011
More informationCONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION. Journal of The Patent Office. This Journal is being published on weekly basis on every Friday
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationParts Manual. cascade
c Parts Manual Model 36G-CCT Tipping Clamp Catalog Number 36G74237 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com Blank 1 Safety Decals 4 1 3 2
More information4CKNYC[A2 A2 AKPFGZ GRU AXLE RAIL / 02
P641G RAILWAY INDEX Mitsubishi Materials is constantly engaging ultra modern technologies in the research and development of cutting tools. Results of the research provide solutions for the ever increasing
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationParts Manual. cascade. corporation. Model. 120H Tower Roll Clamp 120H Catalog Number
c Parts Manual Model Catalog Number 0H Tower Roll Clamp 0H74584 corporation OR Write: Cascade Corporation, P.O. Box 087, Portland, OR 970 Internet: www.cascorp.com 5 4 Decals 7 8 C-7554-4 RC80.ai 4 5 C-7554-5595-R
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationInstallation Instructions
c Installation Instructions Flow Control s This sheet provides installation instructions and replacement parts list for Cascade Flow Control s. The valve reduces the flow rate to the attachment and returns
More informationCONTINUED FROM PART 3
CONTINUED FROM PART 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationNUMERO UNO 57% July 2015 REPLACEMENT SALES TREND AND SELECT CONTRIBUTION APRIL TO JULY 2015 CONTENTS. Replacement Sales Trend. Select Appointment
NUMERO UNO July 2015 Dear Select Members, The long-awaited monsoons are here and this season has showered a lot of positive developments at Bridgestone. Happy browsing! We are happy to introduce many new
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationParts Manual. cascade. corporation. Model. Roll Clamp 38H-RCP-3A Catalog Number
c Parts Manual Model Catalog Number Roll Clamp 8H-RCP-A-000 cascade corporation For Technical Assistance call: 800-7-, Fax: 888-9-807 To Order Parts call: 888-7-, Fax: 888-9-04 OR Write: Cascade Corporation,
More information10R90 Series Light Duty Precision Turbine Grinder
Parts Manual 45-8043 10R90 Series Light Duty Precision Turbine Grinder CAUTION Do Not Lubricate This Tool! For additional product information visit our website at http://www.apextoolgroup.com 45-8043 Dotco
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationEuropean Patent Office Annual Report 2017 Country profile: Netherlands
European Patent Office Annual Report 207 Country profile: Netherlands Contact: press@epo.org www.epo.org/media Date of publication: 7 March 208 Growth of European patent applications global 48 027 52 703
More informationEuropean Patent Office Annual Report 2018 Country profile: Denmark
Annual Report 208 Country profile: Denmark Contact: press@epo.org www.epo.org/media Date of publication: 2 March 209 Growth of European patent applications global 52 703 60 004 59 087 66 594 74 37 +4.6%
More informationCONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationOne machine multiple applications.
One machine multiple applications. image 1 image 2 image 3 image 4 Manufacturing of engineering plastics. Processing of PVC. Manufacturing of TPE. Manufacturing of master batches. Coperion worldwide. >
More informationKare Zindagi Instant Start
Kare Zindagi Instant Start KIND ATTENTION t In event of any particular model being phased out or out of stock, the Company reserves the right to provide another equivalent model of same capacity best
More informationDC MOTORS. Crompton Greaves EVERYDAY SOLUTIONS
Crompton Greaves EVERYDAY SOLUTIONS DC MOTORS LT MOTORS DIVISION A - 6/2, M.I.D.C., AHMEDNAGAR - 414111. MAHARASHTRA. TEL : +91 (0241) 2776 151-154, 2776146, 2776187. FAX : +91 (0241) 2777508 INTRODUCTION
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationParts Manual. cascade. corporation. Model. Paper Roll Clamp 10H-RCP-A010. Catalog Number
c Parts Manual Model Catalog Number Paper Roll Clamp 10H-RCP-A010 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com 3 Decals 1 2 7 5 RC5371.eps 1 7
More informationA9K. MCB, RCCB, Isolator
A9K MCB, RCCB, Isolator Schneider Electric - The global specialist in energy management and automation brings 80 years of experience to India with more than 70,000 people in over a 00 countries We Reduce
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationInstallation Instructions
c Installation Instructions K-Series Fork Positioner Termination Kits 0, 0, 0, 000 and 0 This sheet provides installation instructions and replacement parts list for Cascade High Termination Kits 0, 0,
More informationc Technical Bulletin cascade corporation Applications for Bronze Bearings and Lower Hooks TB 296 May 2015 Lower Hooks Upper Bearings Lower Bearings
228782 c Technical Bulletin TB 296 May 2015 Applications for Bronze Bearings and Lower Hooks This sheet provides information on applications for bronze bearings and hooks. Cascade recommends bronze bearings
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 3 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationApplication Engineering Department Special Product. 170D-CFR Fork Clamp - Revolving
Parts Manual For units with serial# 2177229 2226222 Application Engineering Department Special Product 170D-CFR-66999 Fork Clamp - Revolving FEATURES:..Integral mounting includes rollers, chain anchors
More information75RM-2024 Right Angle Fixtured Nutrunner
Instruction Manual PL12-1092EN 75RM-2024 Right Angle Fixtured Nutrunner For additional product information visit our website at http://www.apextoolgroup.com Cleco Product Information PL70-1092EN The original
More informationOur cleaning science gets you back to business faster. Chematic Cleaners
Our cleaning science gets you back to business faster Chematic Cleaners Chematic Cleaners Achieve significant time and cost savings by using Chematic for effective cleaning processes. Clear view on the
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationParts Manual. cascade
c Parts Manual Model Catalog Number QFM Push/Pull E-QLB-Q00 R cascade corporation To Order Parts call: 888-7-, Fax: 888-9-0 OR Write: Cascade Corporation, P.O. Box 087, Portland, OR 970 Internet: www.cascorp.com
More informationTotal System for Regulation Compliance and Engine/Vehicle R&D
On-board Emissions Measurement System Total System for Regulation Compliance and Engine/Vehicle R&D OBS-ONE is the latest Portable Emissions Measurement System designed for engine/vehicle certification
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationParts Manual. cascade. corporation. Bale Clamp. Model 40D-BCB-55A R0. Serial Number
c Parts Manual Model Serial Number Bale Clamp 40D-BCB-A R0 corporation To Order Parts call: 888-227-2233, Fax: 888-329-0234 OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Internet: www.cascorp.com
More informationXampler laboratory membrane cartridges
GE Healthcare Data File 18-1170-21 AC Membrane separations Xampler laboratory membrane cartridges GE Healthcare Xampler ultrafiltration and microfiltration cartridges are designed for laboratory scale
More informationParts Manual. cascade. corporation. Model. Paper Roll Clamp 20H-RTF-A01X-149. Catalog Number
c Parts Manual Model Catalog Number Paper Roll Clamp 0H-RTF-A0X-9 cascade corporation For Technical Assistance call: 800-7-33, Fax: 888-39-807 To Order Parts call: 888-7-33, Fax: 888-39-03 OR Write: Cascade
More information12-10 Series Inline Grinder
Parts Manual 45-858EN 2-0 Series Inline Grinder Termination -36 Terminations -4 and -6 For additional product information visit our website at http://www.apextoolgroup.com 45-858EN Dotco Nomenclature and
More informationExport Oriented Enterprises (EOE) 1st Quarter Introduction This issue of Economic and Social Indicators (ESI) presents the results of the
Export Oriented Enterprises (EOE) 1st Quarter 2018 1. Introduction This issue of Economic and Social Indicators (ESI) presents the results of the Quarterly Survey of Employment among Export Oriented Enterprises
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationParts Manual. cascade
c Parts Manual Model Catalog Number Paper Roll Clamp H-RCP-B005 R0 corporation For Technical Assistance call: 800-7-, Fax: 888-9-807 To Order Parts call: 888-7-, Fax: 888-9-0 OR Write: Cascade Corporation,
More informationUltra Airless Handheld. The world s most advanced handheld paint sprayers.
Ultra Airless Handheld The world s most advanced handheld paint sprayers. Breakthrough Performance, Reliability, Finish. AIRLESS HANDHELDS Pros agree. Airless handheld sprayers are the essential tool for
More informationExport Oriented Enterprises (EOE) 3 rd Quarter Introduction This issue of Economic and Social Indicators (ESI) presents the results of the
Export Oriented Enterprises (EOE) 3 rd Quarter 2017 1. Introduction This issue of Economic and Social Indicators (ESI) presents the results of the Quarterly Survey of Employment among Export Oriented Enterprises
More informationCONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationExport Oriented Enterprises (EOE) 2nd Quarter 2018
Export Oriented Enterprises (EOE) 2nd Quarter 2018 1. Introduction This issue of Economic and Social Indicators (ESI) presents the results of the Quarterly Survey of Employment among Export Oriented Enterprises
More information