CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
|
|
|
- Malcolm Haynes
- 5 years ago
- Views:
Transcription
1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in the Official Journal of The Patent Office. This Journal is being published on weekly basis on every Friday covering the various proceedings on Designs as required according to the provisions of under Rule 22, 25, 27 and 39 of the Design (Amendment) Rules, All the enquiries on this Official Journal and other information as required by the public should be addressed to the Controller General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that the content can be enriched. The Patent Office Journal 01/07/
2 COPYRIGHT PUBLICATION SL NO CASE NUMBERS RENEWED ON The Patent Office Journal 01/07/
3 REGISTRATION OF DESIGNS The following designs have been registered. They are now open for public inspection. In the following each entry the Date of Registration is shown. The Number, Date and Country are also shown Design Number Class )Solaria Corporation Fremont Boulevard, Fremont, California 94538, United States of America Date of Registration 23/04/2010 Solar Panel Design Number Class )Solaria Corporation Fremont Boulevard, Fremont, California 94538, United States of America Date of Registration 23/04/2010 Solar Panel Design Number Class )Solaria Corporation Fremont Boulevard, Fremont, California 94538, United States of America Date of Registration 23/04/2010 Solar Module The Patent Office Journal 01/07/
4 Design Number Class )Crown Craft (India) Pvt. Ltd., F , Road No. 9F2, V.K.I Area, Jaipur (Raj) Date of Registration 10/08/2010 Tub Design Number Class )Crown Craft (India) Pvt. Ltd., F , Road No. 9F2, V.K.I Area, Jaipur (Raj) Date of Registration 10/08/2010 Tub Design Number Class )National Industries A-2/7 Aji G.I.D.C., Near Dawn Engineering, Rajkot , Gujarat, India Date of Registration 13/08/2010 Spoon Handle The Patent Office Journal 01/07/
5 Design Number Class )ZEBRA Co., Ltd., Japan, 2-9, Higashi-gokencho, Shinjuku-ku, Tokyo, Japan Date of Registration 15/11/2010 Ball-Point Pen Number Date Country D /05/2010 Japan Design Number Class )ZEBRA Co., Ltd., Japan, 2-9, Higashi-gokencho, Shinjuku-ku, Tokyo, Japan Date of Registration 15/11/2010 Ball-Point Pen Number Date Country D /05/2010 Japan Design Number Class )Pyramid Plastics B-30, Royal Industrial Estate, 3rd Floor, Naigaum "X" Road, Wadala, Mumbai , Maharashtra, India Date of Registration 16/11/2010 Bowl The Patent Office Journal 01/07/
6 Design Number Class )Add Corporation Limited Business Park, 6th Floor, Chincholi Naka, S.V. Road, Malad (West), Mumbai , Maharashtra, India. Date of Registration 16/11/2010 Writing Instrument. Design Number Class )Tata Motors Limited Bombay House, 24 Homi Mody Street, Hutatma Chowk, Mumbai , Maharashtra, India Date of Registration 19/11/2010 Door Trim For Vehicle Design Number Class )M/s Mars Industries Pvt. Ltd. A-88, Road No.2, Mahipalpur Extn., New Delhi Date of Registration 22/11/2010 Handle Set The Patent Office Journal 01/07/
7 Design Number Class )M/s K.M. Industries 25-Patparganj Ind. Area Delhi Date of Registration 22/11/2010 Box Design Number Class )Bosch Power Tools (China) Co., Ltd., 567 Bin Kang Road, Bin Jiang District, Hangzhou, Zhejiang Date of Registration 23/11/2010 Jigsaw Number Date Country /08/2010 China Design Number Class )Klaus Waren Fixtures Pvt. Ltd., 285, "Park View" 1st Floor, Flat No. 9, B.A.K. Anjan Marg, Opp. Napoo Garden, Matunga (Central Railway) (E), Mumbai , Maharashtra, India Date of Registration 24/11/2010 Shower Arm. The Patent Office Journal 01/07/
8 Design Number Class )Klaus Waren Fixtures Pvt. Ltd., 285, "Park View" 1st Floor, Flat No. 9, B.A.K. Anjan Marg, Opp. Napoo Garden, Matunga (Central Railway) (E), Mumbai , Maharashtra, India Date of Registration 24/11/2010 Plain Spout Design Number Class )Minda Industries Limited Vill, Nawada Fatepur, P.O. Sikanderpur Badda, Manesar, Distt. Gurgaon, Haryana , India Date of Registration 14/02/2011 Compressed Natural Gas (CNG) Refueling Cap For Vehicle Design Number Class )Tata Motors Limited Bombay House, 24 Homi Mody Street, Hutatma Chowk, Mumbai , Maharashtra, India Date of Registration 14/02/2011 Wheel Cap For Vehicle The Patent Office Journal 01/07/
9 Design Number Class )Mandeep Handicrafts 206, Focal Point, Industrial Area, Mehta Road, Amritsar (Punjab), India Date of Registration 17/02/2011 Chess Knight Design Number Class )Lg Electronics Inc., 20 Yeouido-Dong, Yeongdeungpo-Gu, Seoul Republic of Korea Date of Registration 18/02/2011 Speaker For Home Theater Number Date Country /08/2010 Republic of Korea Design Number Class )Lg Electronics Inc., 20 Yeouido-Dong, Yeongdeungpo-Gu, Seoul Republic of Korea Date of Registration 18/02/2011 Speaker For Home Theater Number Date Country /08/2010 Republic of Korea The Patent Office Journal 01/07/
10 Design Number Class )King Metal Works., A-6/7, Nand Dham Industrial Estate., Agnishamandal Marg, Marol, Andheri (E), Mumbai , State of Maharashtra, (India) Date of Registration 01/06/2010 Paper Holder Design Number Class )Ruud Lighting, Inc., 9201 Washington Avenue, Racine, Wisconsin 53406, USA Date of Registration 23/09/2010 Lighting Fixture Number Date Country 29/358, /03/2010 U.S.A. Design Number Class )Diana Jenkins 2000 Avenue of the Stars, Third Floor, North Tower, Los Angeles, CA U.S.A Date of Registration 24/09/2010 Bottle Cap Number Date Country /04/2010 OHIM The Patent Office Journal 01/07/
11 Design Number Class )Lithium Energy Japan 1, Inobaba-cho, Nishinosho, Kisshoin, Minami-ku, Kyoto-shi, Kyoto , Japan Date of Registration 29/09/2010 Assembled battery Number Date Country /03/2010 Japan Design Number Class )Lithium Energy Japan 1, Inobaba-cho, Nishinosho, Kisshoin, Minami-ku, Kyoto-shi, Kyoto , Japan Date of Registration 29/09/2010 Assembled battery Number Date Country /03/2010 Japan Design Number Class )Nippon Steel Corporation 6-1, Marunouchi 2-chome, Chiyoda-ku, Tokyo , Japan Date of Registration 30/09/2010 Wall Member Number Date Country /05/2010 Japan The Patent Office Journal 01/07/
12 Design Number Class )Nippon Steel Corporation 6-1, Marunouchi 2-chome, Chiyoda-ku, Tokyo , Japan Date of Registration 30/09/2010 Wall Member Number Date Country /05/2010 Japan Design Number Class )Kraft Foods Global Brands Llc, Three Lakes Drive, Northfield, Illinois 60093, USA Date of Registration 01/10/2010 Container Number Date Country 29/368/181 19/08/2010 U.S.A. Design Number Class )Swastik Metal Products 4, Parsana Society, Nr; Patel Nagar, Rajkot Gujarat (India) Date of Registration 20/01/2011 Handle The Patent Office Journal 01/07/
13 Design Number Class )PIUSI S.p.A Via Pacinotti 16/A-Z,l. Rangavino 46029, Suzzara-Italy, An Italian Joint Stock Company, Date of Registration 20/01/2011 Fluid Distribution Nozzle Number Date Country /07/2010 OHIM Design Number Class )Luminous Power Technologies Pvt. Ltd., C-8 & C-9, Community Centre, Janakpuri, New Delhi (India) Date of Registration 24/01/2011 Inverter Design Number Class )Narmada Polymers C-357, DSIDC Indl. Area, Narela, Delhi , (India) Date of Registration 27/01/2011 Sole For Footwear The Patent Office Journal 01/07/
14 Design Number Class )Narmada Polymers C-357, DSIDC Indl. Area, Narela, Delhi , (India) Date of Registration 27/01/2011 Sole For Footwear Design Number Class )Narmada Polymers C-357, DSIDC Indl. Area, Narela, Delhi , (India) Date of Registration 27/01/2011 Sole For Footwear Design Number Class )Panasonic Corporation 1006, Oaza Kadoma, Kandoma-shi, Osaka , Japan Date of Registration 28/01/2011 Vacuum Cleaner Number Date Country /07/2010 Japan The Patent Office Journal 01/07/
15 Design Number Class )Koninklijke Philips Electronics N.V., Groenewoudseweg 1, 5621 Ba Eindhoven, The Netherlands Date of Registration 28/01/2011 Electric Shaver Number Date Country /07/2010 OHIM Design Number Class )Pushkarendra Cottage Industries D.No , Opp: Satyam Tubelights Company, K.L. Rao Nagar, Vijayawada-9 (A.P), India Date of Registration 31/01/2011 Paper Plate Design Number Class )M/s. Two Brothers Export India 4-G, Big Jos Towers, Netaji Subhash Place, Pitam Pura, Delhi Date of Registration 13/06/2008 Basket The Patent Office Journal 01/07/
16 Design Number Class )Suyog Nature Care At-J-508-C, Sarna Doonger Industrial Area, Phase-II, Jhontwara Ext. Jaipur (Raj.) Date of Registration 25/08/2010 Flat Bottom Paper Cup Design Number Class )Parksons Packaging Limited 41/B, Lalbaug Industrial Estate, Dr.Ahmedkar Road, Lalbaug, Mumbai , Maharashtra, India Date of Registration 27/08/2010 Carton Design Number Class )VISCAS Corporation Shinagawa Seaside West Tower, , Higashi Shinagawa, Shinagawa-ku, Tokyo , Japan Date of Registration 31/08/2010 Covered Electric Wire The Patent Office Journal 01/07/
17 Design Number Class )Sony Computer Entertainment Inc., , Minami-Aoyma, Minato-ku, Tokyo, Japan Date of Registration 26/11/2010 Speaker Number Date Country /06/2010 Japan Design Number Class )V. V. Chandran (An Indian Citizen) Vennikkal House kanimangalam P.O. Pin Thrissur District Keral State, India Date of Registration 29/11/2010 Coconut Tree Climbing Machine Design Number Class )Siemens Ltd., 130, Pandurang Budhkar Marg Worli, Mumbai, India Date of Registration 30/11/2010 Terminal Cover The Patent Office Journal 01/07/
18 Design Number Class )M/s Cuspy Metallic Delhi-Mathura Bye-Pass Road, Post Office Chhatikara, Dist Mathura (U.P.) India Date of Registration 22/02/2011 Faucet Design Number Class )Lg Electronics Inc., 20 Yeouido-Dong, Yeongdeungpo-Gu, Seoul Republic of Korea Date of Registration 22/02/2011 Mobile Phone Number Date Country /08/2010 Republic of Korea Design Number Class )Sakaria International., 108/109. 1st Floor Extension, 2, Bldg. 1, Rajprabha Udyog Nagar, Golani Naka, Waliv, Vasai (E), Thane , Maharashtra, India Date of Registration 22/02/2011 Choke The Patent Office Journal 01/07/
19 Design Number Class )Sakaria International., 108/109. 1st Floor Extension, 2, Bldg. 1, Rajprabha Udyog Nagar, Golani Naka, Waliv, Vasai (E), Thane , Maharashtra, India Date of Registration 22/02/2011 Choke Design Number Class )Bombay Plastic Corporation., Dheeraj Heritage, Office No. 342, 3rd Floor, S.V. Road, Santacruz (West), Mumbai , Maharashtra, India. Date of Registration 22/02/2011 Writing Pad (Slot Clip Board) Design Number Class )Filtrona International Limited, Avebury House, Avebury Boulevard, Milton Keynes, MK9 1AU Date of Registration 22/02/2011 Cigarette Filter End Segment Number Date Country /09/2010 U.K. The Patent Office Journal 01/07/
20 Design Number Class )Reckitt & Colman (Overseas) Limited Bath Road, Slough, Berkshire, SL1 3UH, United Kingdom Date of Registration 23/02/2011 Bottle Number Date Country /08/2010 OHIM Design Number Class )M/s. S.N. Kapoor Export Khawasji Ka Bagh, Amer Road, Jaipur (Raj.) Date of Registration 25/02/2011 Carpet Design Number Class )M/s. S.N. Kapoor Export Khawasji Ka Bagh, Amer Road, Jaipur (Raj.) Date of Registration 25/02/2011 Carpet The Patent Office Journal 01/07/
21 Design Number Class )M/s. S.N. Kapoor Export Khawasji Ka Bagh, Amer Road, Jaipur (Raj.) Date of Registration 25/02/2011 Carpet Design Number Class )M/s. S.N. Kapoor Export Khawasji Ka Bagh, Amer Road, Jaipur (Raj.) Date of Registration 25/02/2011 Carpet Design Number Class )M/s. S.N. Kapoor Export Khawasji Ka Bagh, Amer Road, Jaipur (Raj.) Date of Registration 25/02/2011 Carpet The Patent Office Journal 01/07/
22 Design Number Class )M/s. S.N. Kapoor Export Khawasji Ka Bagh, Amer Road, Jaipur (Raj.) Date of Registration 25/02/2011 Carpet Design Number Class )M/s. S.N. Kapoor Export Khawasji Ka Bagh, Amer Road, Jaipur (Raj.) Date of Registration 25/02/2011 Carpet Design Number Class )M/s. S.N. Kapoor Export Khawasji Ka Bagh, Amer Road, Jaipur (Raj.) Date of Registration 25/02/2011 Carpet The Patent Office Journal 01/07/
23 Design Number Class )M/s. S.N. Kapoor Export Khawasji Ka Bagh, Amer Road, Jaipur (Raj.) Date of Registration 25/02/2011 Carpet Design Number Class )L. N. Engineering Works Private Limited 210, Kalyandas Udyog Bhavan, Next to Century Bazaar, Worli, Mumbai , State of Maharashtra, India Date of Registration 25/02/2011 Toaster Handle Design Number Class )M/s. Avishkar Industries C/9 Sai Udhyog Nagar, Goddev Fatak Road, Panchal, Near Gas Godown, Bhyander (East), Pin Dist.: Thane Maharshtra (India) Date of Registration 28/02/2011 Jug The Patent Office Journal 01/07/
24 Design Number Class )M/s. Avishkar Industries C/9 Sai Udhyog Nagar, Goddev Fatak Road, Panchal, Near Gas Godown, Bhyander (East), Pin Dist.: Thane Maharshtra (India) Date of Registration 28/02/2011 Jug Design Number Class )Koninklijke Philips Electronics N.V., Groenewoudseweg 1, 5621 Ba Eindhoven, The Netherlands Date of Registration 28/02/2011 Vacuum Cleaner Number Date Country /08/2010 OHIM Design Number Class )Brother Industries, Ltd., 15-1 Naeshiro-Cho, Mizuho-Ku, Nagoya-Shi, Aichi-Ken, Japan. Date of Registration 28/05/2008 Ink Cartridge Number Date Country /11/2007 Japan The Patent Office Journal 01/07/
25 Design Number Class )M/s Folli Follie Sa., 23rd km Athens Lamia Highway, Athens, Greece Date of Registration 23/07/2010 Necklace Design Number Class )G.V.G. Publishers , 4th Floor, Uma Millennium, Park Lane, Secunderabad , A.P. India Date of Registration 21/10/2010 Electronic Medical Records Storage Device Design Number Class )G.V.G. Publishers , 4th Floor, Uma Millennium, Park Lane, Secunderabad , A.P. India Date of Registration 21/10/2010 Electronic Medical Records Storage Device The Patent Office Journal 01/07/
26 Design Number Class )G.V.G. Publishers , 4th Floor, Uma Millennium, Park Lane, Secunderabad , A.P. India Date of Registration 21/10/2010 Electronic Medical Records Storage Device Design Number Class )G.V.G. Publishers , 4th Floor, Uma Millennium, Park Lane, Secunderabad , A.P. India Date of Registration 21/10/2010 Electronic Medical Records Storage Device Design Number Class )G.V.G. Publishers , 4th Floor, Uma Millennium, Park Lane, Secunderabad , A.P. India Date of Registration 21/10/2010 Electronic Medical Records Storage Device The Patent Office Journal 01/07/
27 Design Number Class )Kemppi Oy Hennalankatu 39, Lahti, Finland Date of Registration 22/10/2010 Arc welding apparatus Design Number Class )Ozone Overseas Ltd., H-40, Bali Nagar, New Delhi , India Date of Registration 25/10/2010 Glass Holding Bracket Design Number Class )Siemens Ltd., 130, Pandurang Budhkar Marg Worli, Mumbai, India Date of Registration 26/10/2010 Horizontal Centre Break Disconnector The Patent Office Journal 01/07/
28 Design Number Class )Lube Corporation Horizon One, 30-16, Nishi-Waseda 3-chome, Shinjuku-ku, Tokyo , Japan Date of Registration 27/10/2010 Cartridge Tank Design Number Class )Shree Siddhivinayak International G-1142, Narela Industrial Estate, DSIDC, Delhi Date of Registration 06/01/2011 Footwear Design Number Class )Ma Design India Private Limited., C-26, Sector 63, Noida , U.P., India. Date of Registration 07/01/2011 Platter The Patent Office Journal 01/07/
29 Design Number Class )Rajindera Udyog 35,Modle Gram,St.No 1 Ludhiana ,(Punjab) India Date of Registration 14/01/2011 Folding Stand For Drying Clothes Design Number Class )Bunny Poly plast (India) C-16,Site A,Sikandra Industrial Area, Agra(U.P), India. Date of Registration 14/01/2011 Sole Of Footwear Design Number Class )Parmigiani Fleurier SA a Swiss company having its registered office at 11, RUE DU TEMPLE, 2114 FLEURIER, SWITZERLAND Date of Registration 14/01/2011 Watch-Case Number Date Country NÂ DM/ /07/2010 WIPO The Patent Office Journal 01/07/
30 Design Number Class )TAL C-136, Sarvodaya Enclave, New Delhi , India. Date of Registration 23/07/2009 Textile Fabric Design Number Class )TAL C-136, Sarvodaya Enclave, New Delhi , India. Date of Registration 23/07/2009 Textile Fabric Design Number Class )TAL C-136, Sarvodaya Enclave, New Delhi , India. Date of Registration 23/07/2009 Textile Fabric The Patent Office Journal 01/07/
31 Design Number Class )TAL C-136, Sarvodaya Enclave, New Delhi , India. Date of Registration 23/07/2009 Textile Fabric Design Number Class )Art Chatons Private Limited 5/32, 2nd Panjrapole Lane, C. P. Tank Road, Mumbai , Maharashtra, India Date of Registration 29/07/2009 Bead For Jewelry Design Number Class )Warner Industries 6-D Nesbit Road, Opp Sales Tax Building, Mazagaon, Mumbai Maharashtra, India Date of Registration 29/03/2010 Seal The Patent Office Journal 01/07/
32 Design Number Class )Parker Pen Products Halifax Avenue, Fradley Park, Lichfield, Staffordshire WS13 8SS, United Kingdom Date of Registration 14/10/2010 Writing Instrument Design Number Class )Parker Pen Products Halifax Avenue, Fradley Park, Lichfield, Staffordshire WS13 8SS, United Kingdom Date of Registration 14/10/2010 Writing Instrument Design Number Class )Parker Pen Products Halifax Avenue, Fradley Park, Lichfield, Staffordshire WS13 8SS, United Kingdom Date of Registration 14/10/2010 Writing Instrument The Patent Office Journal 01/07/
33 Design Number Class )Parker Pen Products Halifax Avenue, Fradley Park, Lichfield, Staffordshire WS13 8SS, United Kingdom Date of Registration 14/10/2010 Writing Instrument Design Number Class )Parker Pen Products Halifax Avenue, Fradley Park, Lichfield, Staffordshire WS13 8SS, United Kingdom Date of Registration 14/10/2010 Cap Of Writing Instrument Design Number Class )Evershine Appliances Pvt. Ltd., Plot No-41, GIDC. Ichhpore, Opp. ONGC, Sachin-Hazira Road, Bhatpore Village, Surat Gujarat-India Date of Registration 20/10/2010 Drawer Channel The Patent Office Journal 01/07/
34 Design Number Class )Amrit Plastics Village-Amanatpur, Bidhipur Phatak, Jalandhar, Punjab Date of Registration 08/12/2010 Tub Design Number Class )Victaulic Company 4901 Kesslersville Road, Easton, Pennsylvania 18040, United States of America Date of Registration 09/12/2010 Pipe Coupling Unit Number Date Country 29/363, /06/2010 U.S.A. Design Number Class )Victaulic Company 4901 Kesslersville Road, Easton, Pennsylvania 18040, United States of America Date of Registration 09/12/2010 Pipe Coupling Unit Number Date Country 29/363, /06/2010 U.S.A. The Patent Office Journal 01/07/
35 Design Number Class )Victaulic Company 4901 Kesslersville Road, Easton, Pennsylvania 18040, United States of America Date of Registration 09/12/2010 Pipe Coupling Number Date Country 29/363, /06/2010 U.S.A. Design Number Class )Victaulic Company 4901 Kesslersville Road, Easton, Pennsylvania 18040, United States of America Date of Registration 09/12/2010 Pipe Coupling Number Date Country 29/363, /06/2010 U.S.A. Design Number Class )Bonjour International 15UA Jawahar Nagar, Delhi , India Date of Registration 09/12/2010 Tiffin Carrier The Patent Office Journal 01/07/
36 Design Number Class )Victaulic Company 4901 Kesslersville Road, Easton, Pennsylvania 18040, United States of America Date of Registration 10/12/2010 Pipe Coupling Number Date Country 29/363, /06/2010 U.S.A. Design Number Class )Piaggio & C. S.p.A., Viale Rinaldo Piaggio 25-Pontedera (PI), Italy, Date of Registration 10/12/2010 Motor Scooter Number Date Country /09/2010 OHIM Design Number Class )The Procter & Gamble Company., One Procter & Gamble Plaza, Cincinnati, Ohio-45202, Usa. Date of Registration 14/12/2010 Container Number Date Country /06/2010 WIPO The Patent Office Journal 01/07/
37 Design Number Class )A. W. Faber-Castell (India) Private Limited., 801, Kamala Excecutive Park, Off. M.V. Road, J. B. Nagar, Andheri (E), Mumbai , Maharashtra, India Date of Registration 03/03/2011 Eraser Design Number Class )A. W. Faber-Castell (India) Private Limited., 801, Kamala Excecutive Park, Off. M.V. Road, J. B. Nagar, Andheri (E), Mumbai , Maharashtra, India Date of Registration 03/03/2011 Eraser Design Number Class )Merino Industries Limited Indian Company of Delhi Road, Hapur , Dist. Ghaziabad, Uttar Pradesh, India Date of Registration 04/03/2011 Desk The Patent Office Journal 01/07/
38 Design Number Class )Mahindra & Mahindra Ltd., Gateway Building, Apollo Bunder, Mumbai , Maharashtra, India Date of Registration 08/03/2011 Door Handle For Vehicle Design Number Class )Mahindra & Mahindra Ltd., Gateway Building, Apollo Bunder, Mumbai , Maharashtra, India Date of Registration 08/03/2011 Instrument Panel For Vehicle Design Number Class )Mahindra & Mahindra Ltd., Gateway Building, Apollo Bunder, Mumbai , Maharashtra, India Date of Registration 08/03/2011 Steering Wheel Of A Vehicle The Patent Office Journal 01/07/
39 Design Number Class )Vivek Gupta 19/277, Sarai Basti, Old Rohtak Road, Delhi Date of Registration 19/01/2010 Decorative Fittings For Spokes of Bicycles and tricycles Design Number Class )Koninklijke Philips Electronics N.V., Groenewoudseweg 1, 5621 BA Eindhoven, The Netherlands Date of Registration 06/10/2010 Luminaire Number Date Country /04/2010 OHIM Design Number Class )Koninklijke Philips Electronics N.V., Groenewoudseweg 1, 5621 BA Eindhoven, The Netherlands Date of Registration 07/10/2010 Luminaire Number Date Country /04/2010 OHIM The Patent Office Journal 01/07/
40 Design Number Class )Dr. Hazeeb Rahman P.A. 36/1906, Rahmans, Seabastian Road, Judges Avenue, Kaloor, Kochi , Kerala State, Indian Citizen Date of Registration 08/10/2010 Autorickshaw Hood Having Inbuilt Display Area For Advertisement Design Number Class )Rittal GmbH & Co. Kg., Auf dem Stuetzelberg Herborn, Germany Date of Registration 11/10/2010 Ventilation Grilles Number Date Country /04/2010 OHIM Design Number Class )Merino Industries Limited Delhi Road, Hapur , Dist. Ghaziabad, Uttar Pradesh, India. Date of Registration 11/10/2010 Desk The Patent Office Journal 01/07/
41 Design Number Class )Merino Industries Limited Delhi Road, Hapur , Dist. Ghaziabad, Uttar Pradesh, India. Date of Registration 11/10/2010 Desk Design Number Class )Merino Industries Limited Delhi Road, Hapur , Dist. Ghaziabad, Uttar Pradesh, India Date of Registration 11/10/2010 Desk Design Number Class )SATA GmbH & Co. KG Domertaqlstrasse 20, Kornwestheim, Deutschland, Germany Date of Registration 11/10/2010 Cap For Manometer Number Date Country /04/2010 Germany The Patent Office Journal 01/07/
42 Design Number Class )B & V Design Pvt. Ltd., F-1102, Chittranjan Park, New Delhi , India Date of Registration 13/10/2010 Candle Holder Design Number Class )Guru Nanak Agriculture Engg. Works Handiya Distt. Barnala (Punjab) India Date of Registration 13/10/2010 Design Number Class Harvesting Combine 1)Sushant Shalindar Kadav 2/17 Sahyadri nagar, Charkop, Kadivali (W) Mumbai , Maharashtra, India Date of Registration 15/12/2010 Car The Patent Office Journal 01/07/
43 Design Number Class )Jalaram Polymers Pvt. Ltd., 10 Deven Industrial Estate, I.B., Patel Road, Goregaon (E), Mumbai, Maharashtra, India Date of Registration 14/12/2010 Mixer Grinder Design Number Class )Su-Kam Power Systems Ltd., Plot No. WZ-1401/2, Nangal Raya, New Delhi , India Date of Registration 22/12/2010 Bobbin Design Number Class )Sun Furniture 1/7571, Street No.9, East Gorakh Park, Shahdara, Delhi , (India) Date of Registration 23/12/2010 Wardrobe The Patent Office Journal 01/07/
44 Design Number Class )Sun Furniture 1/7571, Street No.9, East Gorakh Park, Shahdara, Delhi , (India) Date of Registration 23/12/2010 Wardrobe Design Number Class )Sun Furniture 1/7571, Street No.9, East Gorakh Park, Shahdara, Delhi , (India) Date of Registration 23/12/2010 Wardrobe Design Number Class )TATA Chemicals Ltd., Bombay House, 24 Homi Mody Street, Mumbai , India. Date of Registration 05/09/2008 Washer The Patent Office Journal 01/07/
45 Design Number Class )Mvm Hangers Private Limited 1, Raj Nagar Enclave, Pitam Pura, Delhi (India) Date of Registration 09/07/2010 Shoe Shiner Design Number Class )Patdiam Jewellery Pvt. Ltd., Unit No. 102, Tower No.102, Tower No. 1, Seepz++, Seepz, Andheri (East), Mumbai , Maharashtra, India Date of Registration 14/09/2010 Ring Design Number Class )Patdiam Jewellery Pvt. Ltd., Unit No. 102, Tower No.102, Tower No. 1, Seepz++, Seepz, Andheri (East), Mumbai , Maharashtra, India Date of Registration 14/09/2010 Pendant The Patent Office Journal 01/07/
46 Design Number Class )Patdiam Jewellery Pvt. Ltd., Unit No. 102, Tower No. 1, Seepz++, Seepz, Andheri (East), Mumbai , Maharashtra, India Date of Registration 14/09/2010 Earring Design Number Class )Kohler Co., 444 Highland Drive, Kohler, Wisconsin, 53044, United States of America Date of Registration 14/09/2010 Shower Control Panel Number Date Country 29/357, /03/2010 U.S.A. Design Number Class )B. E. Jayanna Kirthan Tailors and Materials, Old Market, Belur , Hassan District, Karnataka, India Date of Registration 15/09/2010 Top Cover For Two Wheeler Vehicle The Patent Office Journal 01/07/
47 Design Number Class )Universal Industrial Corp., B 13-B, Gali No.8, Anand Parbat Industrial Area, New Rohtak Road, New Delhi , India Date of Registration 17/09/2010 Wheel Cap. Design Number Class )D. K. Jain D-19, Nizammudin East, New Delhi , India Date of Registration 17/09/2010 Pen Sprayer Design Number Class )Societe Des Produits Nestle S.A Vevey, Switzerland. Date of Registration 17/09/2010 Packaging Number Date Country /05/2010 Switzerland The Patent Office Journal 01/07/
48 Design Number Class )Safholland GmbH Hauptstrass 26, Bessenbach, Germany Date of Registration 28/12/2010 Brake Drum Number Date Country DE /08/2010 Germany Design Number Class )Indus Health Care 1, Jagjeevan Ram Mohalla, Indore (Maharashtra), India Date of Registration 31/12/2010 Bottle Design Number Class )ITC Limited Virginia House, 37, J.L. Nehru Road, Kolkata , West Bengal, India Date of Registration 04/01/2011 Cigarette Pack The Patent Office Journal 01/07/
49 Design Number Class )ITC Limited Virginia House, 37, J.L. Nehru Road, Kolkata , West Bengal, India Date of Registration 04/01/2011 Cigarette Pack Design Number Class )Jyoti (India) Metal Industries Private Limited Palghar-Manor Road, Palghar (East) , State of Maharashtra, India Date of Registration 04/08/2010 Wash Basin Design Number Class )Rajat Singhal Flat no.5, R-10, Nehru Enclave, New Delhi , India Date of Registration 04/08/2010 Bird Control Device The Patent Office Journal 01/07/
50 Design Number Class )Nokia Corporation Keilalahdentie 4, Espoo, Fin-02150, Finland Date of Registration 02/11/2010 Charging Plate Number Date Country 29/ /07/2010 U.S.A. Design Number Class )Nokia Corporation Keilalahdentie 4, Espoo, Fin-02150, Finland Date of Registration 02/11/2010 Handset Number Date Country 29/ /06/2010 U.S.A. Design Number Class )Nokia Corporation Keilalahdentie 4, Espoo, Fin-02150, Finland Date of Registration 02/11/2010 Headset Holder Number Date Country 29/ /09/2010 U.S.A. The Patent Office Journal 01/07/
51 Design Number Class )JCB India Limited B-1/1-1, 2nd Floor, Mohan Co-operative Industrial Estate, Mathura Road, New Delhi, India Date of Registration 03/11/2010 Boom Head For Pick And Carry Cranes Design Number Class )Beaver-Visitec International (US), Inc., 272 East Deerpath Road, Suite 328, Lake Forest, IL 60045, Date of Registration 10/11/2010 Surgical Blade Tip Adaptor With Side Channels Number Date Country 29/361, /05/2010 U.S.A. Design Number Class )Bluplast Industries Limited 113/114, Vivek Industrial Estate, Near Litolier, Cama Estate, Uswala Road, Goregaon (E), Mumbai [Maharashtra] India Date of Registration 11/11/2010 Mobile Stand The Patent Office Journal 01/07/
52 Design Number Class )Mehul Suresh Kamdar 114 White House 2nd Floor, 17, T.B.Kadam Marg, Chinchpoki (E) Maharashtra, India Date of Registration 12/11/2010 Compact Multipurpose Holder Design Number Class )Beaute Prestige International 28/32, Avenue Victor Hugo Paris France Date of Registration 09/02/2011 Flask Number Date Country /09/2010 OHIM Design Number Class )Joyo Plastics 15AF, New Empire Industrial Estate, Kondivita Road, Andheri-Kurla Road, J.B. Nagar, ANdheri (East), Mumbai , State of Maharashtra, India Date of Registration 10/02/2011 Container The Patent Office Journal 01/07/
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 2
CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 2
CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 3
CONTINUED FROM PART 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
TRANSPORT - RENUKOOT Printed Jan. 2018
TRANSPORT - RENUKOOT Printed Jan. 2018 HINDALCO Hindalco Catalogue Contents Page No. A. Hindalco - An Overview B. Specifications... 06... 08 1. Bus Windows... 12 2. Bus Structurals... 19 3. Moulding...
CONTINUED FROM 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in
CONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Kare Zindagi Instant Start
Kare Zindagi Instant Start KIND ATTENTION t In event of any particular model being phased out or out of stock, the Company reserves the right to provide another equivalent model of same capacity best
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 3 INTRODUCTION
CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
at Spielwarenmesse International Toy Fair 2013 EXHIBITS SPORTS GOODS EXPORT PROMOTION COUNCIL
at Spielwarenmesse International Toy Fair 2013 EXHIBITS SPORTS GOODS EXPORT PROMOTION COUNCIL 29 at Spielwarenmesse International Toy Fair 2013 EXHIBITS 30 SPORTS GOODS EXPORT PROMOTION COUNCIL List of
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART-1
CONTINUED FROM PART-1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
NEW! Ultra EC Motors. Ultra performance in a complete family of brushless slotless miniature motors.
NEW! Ultra EC Motors Ultra performance in a complete family of brushless slotless miniature motors. No two applications are the same. One design definitely does not fit all. Not when your application has
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 3
CONTINUED FROM PART 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Maximum retail price list. For SIBCO range of bearing housings and accessories Bearing housings, sleeves, locknuts, lock washers and locating rings
Maximum retail price list For SIBCO range of bearing housings and accessories Bearing housings, sleeves, locknuts, lock washers and locating rings Effective from 1 st April, 2017 Engineered for optimized
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
HORIBA Jobin Yvon GmbH HORIBA Vietnam Company Limite ted Hea d Offi ce HORIBA ITALIA Srl Mil ano Office HORIBA Korea Ltd. Seoul Branch HORIBA Instruments Inc. Edison office HORIBA FRANCE SAS HORIBA India
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
NO.8 ZENGJIA ROAD, JIANGSU ZHONGGUANCUN SCIENCE & TECHNOLOGY INDUSTRIAL PARK, JIANGSU, VIA CAVALIERI DUCATI, BOLOGNA, REPUBLIC OF ITALY
1 BMW AG BMW MOTORRAD AM JULIUSTURM 14-38, D-13599, BERLIN, FEDERAL REPUBLIC OF GERMANY Expiry R2350-16 29-Jun-2016 28-Jun-2019 2 CHANGZHOU HANDE ELECTRIC VEHICLE CO., TLD NO.8 ZENGJIA ROAD, JIANGSU ZHONGGUANCUN
15K Series Extented Mini Right Angle Drill Attachment
Parts Manual PL30-2052EN 15K27-5172 Series Extented Mini Right Angle Drill Attachment For additional product information visit our website at http://www.apextoolgroup.com PL30-2052EN Dotco Nomenclature
10LF and 12LF Series Right Angle Grinders
Product Manual 10LF and 12LF Series Right Angle Grinders XX L F 2 XX - XX Tool Series 10 = Aluminum Housing 12 = Ergo Housing Throttle Type L = Locking Lever Motor Size F = 0.4 hp Handle Style 2 = Right
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Parts Manual PL EN 05/19/ L4321 Router. For additional product information visit our website at
Parts Manual 10L4321 Router For additional product information visit our website at http://www.apextoolgroup.com Product Information The original language of this manual is English. Product Safety Information:
SIPRO TECH. A-502,Yasho Narayana Building, Near Panvel Railway Station, Old Panvel, NaviMumbai Ph.no: / ,
Sipro Tech is established in Jan 2008. COMPANY PROFILE The firm is mainly engaged in carrying out all type of Engineering Design works such as detail Engineering of Electrical Systems & Control Panels
Parts Manual EN PL30-12R04 07/21/ R04 Series 0.1 HP Inline Pencil Grinder
Parts Manual PL30-12R04 12R04 Series 0.1 HP Inline Pencil Grinder For additional product information visit our website at http://www.apextoolgroup.com Dotco Nomenclature 12 R 04 XX - X X Series 12 = Ergo
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
AUTHORITY FOR ADVANCE RULINGS (INCOME TAX)
DATE: 26.12.2016 (Monday) 1 AAR/971/2010 LG Electronics India Pvt. Ltd.,Greater Noida (UP) S245R(2) CIT (IT), Noida 2 AAR/1064/2011 The Goodyear Tire & Rubber Company, USA S245R(2) CIT(IT) - 2, ND 3 AAR/1214/2011
CONTINUED FROM PART-1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect
CONTINUED FROM PART-1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Airetool. Gas Line Cleaners Range: 3/4 (19.05mm) to 1-1/2 (38.10mm) Operating & Service Manual PL EN 10/01/2015
Operating & Service Manual PL9-6026EN 0/0/205 Airetool Gas Line Cleaners Range: 3/4 (9.05mm) to -/2 (38.0mm) For additional product information visit our website at http://www.apextoolgroup.com PL9-6026EN
CONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
10N10 Series Inline Grinder
Parts Manual 0N0 Series Inline Grinder For additional product information visit our website at http://www.apextoolgroup.com Nomenclature and Specifications Product Type 0 = Aluminum Housing Grinder Throttle
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
10N M6 Series Right Angle Grinder
Parts Manual PL30-2042EN 10N1200-36M6 Series Right Angle Grinder For additional product information visit our website at http://www.apextoolgroup.com PL30-2042EN Dotco Nomenclature and Specifications Product
The Present and the Future of the Stainless Steel Market in India. Ramesh R. Gopal General Manager Nickel Institute Executive Director I S S D A
The Present and the Future of the Stainless Steel Market in India Ramesh R. Gopal General Manager Nickel Institute Executive Director I S S D A This Picture Says it All! India s end-use break-up (2007-08)
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
You ll find many Tsubaki products being
You ll find many Tsubaki products being There are many processes involved in making a motor vehicle. You ll find Tsubaki products in all of these processes, from conveying vehicle bodies from the stockyard,
STABILYS NATURAL POLYMERS FOR COATED PAPER. Ink dot definition. Enhanced contrast. Ink gloss
STABILYS NATURAL POLYMERS FOR COATED PAPER Ink dot definition Enhanced contrast Ink gloss STABILYS modified natural polymers for coated paper A range............ S U M M A R Y STABILYS A for Coating.
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
12-10 Series Inline Grinder
Parts Manual 45-858EN 2-0 Series Inline Grinder Termination -36 Terminations -4 and -6 For additional product information visit our website at http://www.apextoolgroup.com 45-858EN Dotco Nomenclature and
One machine multiple applications.
One machine multiple applications. image 1 image 2 image 3 image 4 Manufacturing of engineering plastics. Processing of PVC. Manufacturing of TPE. Manufacturing of master batches. Coperion worldwide. >
Cooling systems for rolling stock
Cooling systems for rolling stock Alstom Transport / Capa Pictures-F.Clément AKG is a global partner and supplier of cooling technology components and systems. The AKG Group develops and produces worldwide
DC MOTORS. Crompton Greaves EVERYDAY SOLUTIONS
Crompton Greaves EVERYDAY SOLUTIONS DC MOTORS LT MOTORS DIVISION A - 6/2, M.I.D.C., AHMEDNAGAR - 414111. MAHARASHTRA. TEL : +91 (0241) 2776 151-154, 2776146, 2776187. FAX : +91 (0241) 2777508 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
(a) Name of Company : SHREE RANGAVADHUT ENGINEERS
SHREE RANGAVADHUT ENGINEERS No. 8, 1 st Floor, Dhamanwala Service Complex, Opp. S.B.I., G.I.D.C., PANDESARA, Surat-394 221. Tele : 0261-2891016 e-mail : info@srae.co.in / shreerangavadhut2003@yahoo.co.in
CONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
75RM-2024 Right Angle Fixtured Nutrunner
Instruction Manual PL12-1092EN 75RM-2024 Right Angle Fixtured Nutrunner For additional product information visit our website at http://www.apextoolgroup.com Cleco Product Information PL70-1092EN The original
YASKAWA AC Drive-V1000
YASKAWA AC Drive-J1000 Compact V/f Control Drive Manual Supplement Supplement to: J1000 Quick Start Guide TOEPC71060626C Type: CIMR-JU A Models: 200 V Class, Three-Phase Input: 0.1 to 5.5 kw 200 V
10R90 Series Light Duty Precision Turbine Grinder
Parts Manual 45-8043 10R90 Series Light Duty Precision Turbine Grinder CAUTION Do Not Lubricate This Tool! For additional product information visit our website at http://www.apextoolgroup.com 45-8043 Dotco
Product Manual PL31-15LF 04/02/ LF Series Inline Grinders
Product Manual PL31-15LF 15LF Series Inline Grinders 15 L F 0 X X - XX NL Tool Series 15 = Drill Throttle Type L = Locking Lever Motor Size F = 0.4 hp Handle Style 0 = Straight Exhaust Type 5 = Front Exhaust
10LF and 12LF Series Right Angle Grinder and Sander
Product Manual 4-842EN 10LF and LF Series Right Angle Grinder and Sander For additional product information visit our website at http://www.apextoolgroup.com 4-842EN Dotco Nomenclature XX L F 2 XX - XX
CONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Table 6.15: Horse power-wise models of tractors and power tillers available in India (as on March 2016)
Table 6.15: Horse power-wise models of tractors and power tillers available in India (as on March 2016) S.No. Tractor company / model 1.0 New Holland Tractors, Gautam Budh Nagar, Uttar Pradesh 1.1 Tractor
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
DRX. MCCBs for residential and commercial SYSTEMS FOR ELECTRICAL INSTALLATIONS & INFORMATION NETWORKS.
DRX MCCBs for residential and commercial SYSTEMS FOR ELECTRICAL INSTALLATIONS & INFORMATION NETWORKS www.legrand.co.in Combining forces to provide power and protection With offers in more than 160 countries,
CONTINUED FROM PART- 3 INTRODUCTION
CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Automated manufacturing facility admeasuring 150,000 sq.ft. area operational in 2019
New Product Automated manufacturing facility admeasuring 150,000 sq.ft. area operational in THE GROWTH AHEAD telecom aviation printing MARINE telecom electric panels 2000 telecom ITEMS SOLD 5449 ITEMS
BTS Fair of Shoes, Leather & Leather Goods in Poznan, Poland- August 29th to 31st A Report by Dr. Debasis De, Asst.
BTS Fair of Shoes, Leather & Leather Goods in Poznan, Poland- August 29th to 31st 2016. A Report by Dr. Debasis De, Asst. Director, CLE-ER Poland (Republic of Poland) is one of the countries in Central
N60 Rotary Vane Pneumatic Motor
Parts Manual PL70-1043EN 24-1312N60 Rotary Vane Pneumatic Motor For additional product information visit our website at http://www.apextoolgroup.com PL70-1043EN Cleco 24-1312N60 Rotary Vane Motor Model
Agilent 4UHV Ion Pump Controller. For Ultra High Vacuum
Agilent 4UHV Ion Pump Controller For Ultra High Vacuum The New Agilent 4UHV Ion Pump Controller The new state-of-the-art Agilent 4UHV Ion Pump Controller operates up to four pumps simultaneously and independently.