CONTINUED FROM PART 1
|
|
|
- Jared Hoover
- 5 years ago
- Views:
Transcription
1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in the Official Journal of The Patent Office. This Journal is being published on weekly basis on every Friday covering the various proceedings on Designs as required according to the provisions of under Rule 22, 25, 27 and 39 of the Design (Amendment) Rules, All the enquiries on this Official Journal and other information as required by the public should be addressed to the Controller General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that the content can be enriched. The Patent Office Journal 25/09/
2 THE DESIGNS ACT 2000 SECTION 30 DESIGN ASSIGNMENT (1) The Design stands in the name of SIEMENS AKTIENGSELLSCHAFT, registered under the Designs Act, 1911 has been assigned in the Register of Design in the name as follows:- Design No. Class Name BENQ MOBILE GMBH & CO. OHG OF HAIDEUPLATZ 1, D-81667, MUNCHEN, GERMANY (2) The Design stands in the name of MATADOR A.S., registered under the Designs Act, 1911 has been assigned in the Register of Design in the name as follows:- Design No. Class Name CONTINENTAL MATADOR RUBBER, S.R.O., A SLOVAKIAN COMPANY OF TEREZIE VANSOVEJ 1054, PUCHOV, SLOVAK REPUBLIC The Patent Office Journal 25/09/
3 Design Number Class )AAR AAY Products (P) Ltd. C-1, S.M.A. Industrial Estate, G.T. Karnal Road, Delhi , India Date of Registration 14/07/2006 Design Number Class Sole For Footwear 1)AAR AAY Products (P) Ltd. C-1, S.M.A. Industrial Estate, G.T. Karnal Road, Delhi , India Date of Registration 14/07/2006 Sole For Footwear Design Number Class )Paris luxurious Fashion Pvt. Ltd 1956 Barodra- Jambusar N. High Way Road, At & Po Dabhasa, Ta, Padra , Dist Barodra, Gujarat, India Date of Registration 18/10/2006 REGISTRATION OF DESIGNS The following designs have been registered. They are now open for public inspection. In the following each entry the Date of Registration is shown. The Priority Number, Priority Date and Priority Country are also shown. Tooth Brush The Patent Office Journal 25/09/
4 Design Number Class )Paris luxurious Fashion Pvt. Ltd 1956 Barodra- Jambusar N. High Way Road, At & Po Dabhasa, Ta, Padra , Dist Barodra, Gujarat, India Date of Registration 18/10/2006 Tooth Brush Design Number Class )Saddlesprings beverage Company, Inc 203 Argonne Ave US Long Beach, Ca Date of Registration 03/05/2006 Pouch /05/2006 Switzerland Design Number Class )Kohler Co 444 Highland Drive, Kohler, Wisconsin 53044, USA Date of Registration 18/04/2006 Showerhead 29/258,207 18/04/2006 U.S.A. The Patent Office Journal 25/09/
5 Design Number Class )Kohler Co 444 Highland Drive, Kohler, Wisconsin 53044, USA Date of Registration 18/04/2006 Vanity 29/258,203 18/04/2006 U.S.A. Design Number Class )Kohler Co 444 Highland Drive, Kohler, Wisconsin 53044, USA Date of Registration 18/04/2006 Toilet Seat 29/258,201 18/04/2006 U.S.A. Design Number Class )Arvindbhai B. Chandarana, Ashokbhai M. Patel 20, Sarvodaya Society, opp. hotel Oasis, Varachha road, Surat, Gujrat, India Date of Registration 19/10/2006 Bottle The Patent Office Journal 25/09/
6 Design Number Class )Jineshwar Writing Instruments Ltd. AH/2, Shakti House, Opp. Kusum Masala, Cama Industrial Estate, Walbhat Road, Goregaon (East), Mumbai , Maharashtra, India Date of Registration 19/10/2006 Pen Design Number Class )Microsoft Corporation One Microsoft Way, Redmond, Washington, 98052, U.S.A. Date of Registration 26/06/2006 Base For A Phone 29/247,547 26/06/2006 U.S.A. Design Number Class )Microsoft Corporation One Microsoft Way, Redmond, Washington, 98052, U.S.A. Date of Registration 26/06/ /247,551 26/06/2006 U.S.A. Base For A Phone The Patent Office Journal 25/09/
7 Design Number Class )Microsoft Corporation One Microsoft Way, Redmond, Washington, 98052, U.S.A. Date of Registration 07/04/2006 Icon 29/246,400 07/04/2006 U.S.A. Design Number Class )Microsoft Corporation One Microsoft Way, Redmond, Washington, 98052, U.S.A. Date of Registration 07/04/2006 Icon 29/ /07/2006 U.S.A. Design Number Class )Microsoft Corporation One Microsoft Way, Redmond, Washington, 98052, U.S.A. Date of Registration 07/04/ /246,407 07/04/2006 U.S.A. Icons The Patent Office Journal 25/09/
8 Design Number Class )Microsoft Corporation One Microsoft Way, Redmond, Washington, 98052, U.S.A. Date of Registration 07/04/2006 Icons 29/246,405 07/04/2006 U.S.A. Design Number Class )Roca Sanitario S.A Av. Diagonal, , Barcelona, Spain Date of Registration 26/09/2006 Washtand Tap Design Number Class )Roca Sanitario S.A Av. Diagonal, , Barcelona, Spain Date of Registration 29/09/2006 Bath-Shower Tap The Patent Office Journal 25/09/
9 Design Number Class )Roca Sanitario S.A Av. Diagonal, , Barcelona, Spain Date of Registration 26/09/2006 Shower-Bath Tap Design Number Class )Roca Sanitario S.A Av. Diagonal, , Barcelona, Spain Date of Registration 26/09/2006 Sink Tap Design Number Class )Biz Smart Innovative Solutions Sco , Sector 34-A, Chandigarh, Punjab, India Date of Registration 23/10/2006 Shoe The Patent Office Journal 25/09/
10 Design Number Class )Pirelli Tyre S.P.A. Viale Sarca 222, Milano, Italy Date of Registration 30/03/2006 Pneumatic Tyre / /03/2006 EUROPEAN UNION Design Number Class )Pirelli Tyre S.P.A. Viale Sarca 222, Milano, Italy Date of Registration 30/03/2006 Tyre / /03/2006 EUROPEAN UNION Design Number Class )Power Plate International Ltd. 9A, Utopia Village, 7 Chalcot Road, Primrose Hill, London MW 1 8LH, U.K. Date of Registration 22/09/2006 Power Plate The Patent Office Journal 25/09/
11 Design Number Class )Power Plate International Ltd. 9A, Utopia Village, 7 Chalcot Road, Primrose Hill, London MW 1 8LH, U.K. Date of Registration 22/09/2006 Power Plate Design Number Class )The Coca-Cola Company P.O. Box 1734, Atlanta, Georgia 30301, U.S.A. Date of Registration 25/04/2006 Bottle /04/2006 U.S.A. Design Number Class )Warner Lambert Company llc 201, tabor Road, Morris plains, new jersey 07950, u.s.a Date of Registration 24/04/ /258,535 24/04/2006 U.S.A. Bottle Holder The Patent Office Journal 25/09/
12 Design Number Class )Valasumani lathe Works 42, Muthur road, Sivagiri, erode distric , tamilnadu, india Date of Registration 25/10/2006 Multicrop Thresher Design Number Class )Hni Corporation 414 East 3rd Street, P.O. Box 1109, Muscatine, Lowa 55447, U.S.A Date of Registration 24/03/2006 Chair 29/256,832 24/03/2006 U.S.A. Design Number Class )Hni Corporation 414 East 3rd Street, P.O. Box 1109, Muscatine, Lowa 55447, U.S.A Date of Registration 24/03/2006 Chair 29/256,802 24/03/2006 U.S.A. The Patent Office Journal 25/09/
13 Design Number Class )Hni Corporation 414 East 3rd Street, P.O. Box 1109, Muscatine, Lowa 55447, U.S.A Date of Registration 24/03/2006 Chair 29/256,772 24/03/2006 U.S.A. Design Number Class )Hni Corporation 414 East 3rd Street, P.O. Box 1109, Muscatine, Lowa 55447, U.S.A Date of Registration 24/03/2006 Chair 29/256,823 24/03/2006 U.S.A. Design Number Class )Isuzu Motors Limited , Minami-Oi, Shinagawa-Ku, Tokyo , Japan Date of Registration 26/06/ /06/2006 China Van The Patent Office Journal 25/09/
14 Design Number Class )Isuzu Motors Limited , Minami-Oi, Shinagawa-Ku, Tokyo , Japan Date of Registration 26/06/ /06/2006 China A Truck Design Number Class )Queens Sanitar Produkte Gmbh Bischofstr, 89, Kreffld, Germany Date of Registration 02/05/2006 Metal Fittings And Mountings For Doors Windows Etc /05/2006 OHIM Design Number Class )Queens Sanitar Produkte Gmbh Bischofstr, 89, Kreffld, Germany Date of Registration 25/10/2006 Metal Fittings And Mounting For Doors Windows Etc The Patent Office Journal 25/09/
15 Design Number Class )Queens Sanitar Produkte Gmbh Bischofstr, 89, Kreffld, Germany Date of Registration 02/05/2006 Metal Fittings And Mountings For Doors Windows Etc /05/2006 OHIM Design Number Class )Luxury Timepieces International 2 Chemin Des Rochettes, 2016, Cortaillod, Switzerland Date of Registration 21/06/2006 Wristwatch /06/2006 Switzerland Design Number Class )Plastech Intl. Pvt. Ltd. 212/3, Ashirwad Estate, Ram Mandir Road, Goregaon (West), Mumbai , Maharashtra, India Date of Registration 26/10/2006 Game The Patent Office Journal 25/09/
16 Design Number Class )Ronak Industries G-2, Chirag Udyog Bhavan, Plot No.8/9, Golden Industrial Estate, Somnath Road, Dabhel, Daman , India Date of Registration 26/10/2006 Contact Holder Design Number Class )Inoxpa S.A. Telers, 54, Banyoles, Girona, Spain Date of Registration 31/07/2006 Handle For Valves /07/2006 OHIM Design Number Class )Inoxpa S.A. Telers, 54, Banyoles, Girona, Spain Date of Registration 31/07/2006 Handle For Valves /07/2006 OHIM The Patent Office Journal 25/09/
17 Design Number Class )Siemens Aktiengesellschaft Wittelsbacherplatz 2, Munich, Germany Date of Registration 18/05/2006 Cast Resin Coil /05/2006 OHIM Design Number Class )Nilkamal Crates And Bins 77/78, Nilkamal House, Road No. 13/14, M.I.D.C., Andheri East, Mumbai , Maharashtra, India Date of Registration 27/10/2006 Crate Design Number Class )Nilkamal Crates And Bins 77/78, Nilkamal House, Road No. 13/14, M.I.D.C., Andheri East, Mumbai , Maharashtra, India Date of Registration 27/10/2006 Crate The Patent Office Journal 25/09/
18 Design Number Class )Kabushiki Kaisha Toshiba 1-1, Shibaura 1-Chome, Minato-Ku, Tokyo, Japan Date of Registration 14/07/2006 Refrigerator /07/2006 Japan Design Number Class )Ugolini Design S.P.A 33/35,47852, Cerasolo (RN), Italy Date of Registration 14/03/2006 Motorcycle RN2006O /03/2006 Italy Design Number Class )Ugolini Design S.P.A 33/35,47852, Cerasolo (RN), Italy Date of Registration 14/03/2006 RN2006O /03/2006 Italy Motorcycle The Patent Office Journal 25/09/
19 Design Number Class )Ugolini Design S.P.A 33/35,47852, Cerasolo (RN), Italy Date of Registration 14/03/2006 Motorcycle RN2006O /03/2006 Italy Design Number Class )Pashupati Impex Pvt. Ltd. 21, Rama Park, Kishanganj, Delhi , India Date of Registration 28/08/2006 Kerosene Pressure Stove Design Number Class )TVS Motor Company Limited Haddows Road,Chennai , Tamil Nadu,India Date of Registration 18/12/2006 Tank For Motorcycle The Patent Office Journal 25/09/
20 Design Number Class )Semi-Photonics Co. Ltd. 7F, No.13, Ke Jung Road, Chu-Nan Site, Hsinchu Science Park, Chu-Nan 350, Miao-Li Country, Taiwan Date of Registration 27/10/2006 Led With Lens Design Number Class )Shingvi Medicares Pvt.Ltd. Nagar Kalyan Road,Bhalwani,Taluka Parner Dist.Ahmednagar,Maharashtra,India Date of Registration 13/11/2006 Container Design Number Class )Love Heel Limited 3 West Grange,Main Road,East Hagbourne,Didcot Ox119lj,Reino Unido. Date of Registration 10/05/2006 Heel /05/2006 OHIM The Patent Office Journal 25/09/
21 Design Number Class )Lutron Electronics Company 7200 Suter Road, Coopersburg,Pennsylania ,U.S.A Date of Registration 26/05/ /260,548 26/05/2006 U.S.A. Wall Mountable Lighting Design Number Class )Lutron Electronics Company 7200 Suter Road, Coopersburg,Pennsylania ,U.S.A Date of Registration 20/05/2006 Wall Mountable Lighting 29/260,529 26/05/2006 U.S.A. Design Number Class )Lutron Electronics Company 7200 Suter Road, Coopersburg,Pennsylania ,U.S.A Date of Registration 26/05/ /260,549 26/05/2006 U.S.A. Wall Mountable Lighting The Patent Office Journal 25/09/
22 Design Number Class )Lutron Electronics Company 7200 Suter Road, Coopersburg,Pennsylania ,U.S.A Date of Registration 26/05/ /260,532 26/05/2006 U.S.A. Wall Mountable Lighting Design Number Class )Lutron Electronics Company 7200 Suter Road, Coopersburg,Pennsylania ,U.S.A Date of Registration 26/05/2006 Wall Mountable Lighting 29/260,527 26/05/2006 U.S.A. Design Number Class )Lutron Electronics Company 7200 Suter Road, Coopersburg,Pennsylania ,U.S.A Date of Registration 26/05/2006 Wall Mountable Lighting 29/260,601 26/05/2006 U.S.A. The Patent Office Journal 25/09/
23 Design Number Class )Lutron Electronics Company 7200 Suter Road, Coopersburg,Pennsylania ,U.S.A Date of Registration 26/05/2006 Wall Mountable Lighting 29/260,547 26/05/2006 U.S.A. Design Number Class )Lutron Electronics Company 7200 Suter Road, Coopersburg,Pennsylania ,U.S.A Date of Registration 26/05/2006 Wall Mountable Lighting 29/260,530 26/05/2006 U.S.A. Design Number Class )Lutron Electronics Company 7200 Sutar Road, Coopersburg, Pennsylvania , U.S.A Date of Registration 26/05/ /260,555 26/05/2006 U.S.A. Wall Mountable Lighting Control Unit The Patent Office Journal 25/09/
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 2
CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 2
CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART-1
CONTINUED FROM PART-1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 3
CONTINUED FROM PART 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
AUTHORITY FOR ADVANCE RULINGS (INCOME TAX)
DATE: 26.12.2016 (Monday) 1 AAR/971/2010 LG Electronics India Pvt. Ltd.,Greater Noida (UP) S245R(2) CIT (IT), Noida 2 AAR/1064/2011 The Goodyear Tire & Rubber Company, USA S245R(2) CIT(IT) - 2, ND 3 AAR/1214/2011
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 3 INTRODUCTION
CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
ISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO
P-EX01-A Solenoid Valve (with M Connector) Conforming to ISO 1507-1, Large capacity EVS1-01 (Size: 01) EVS1-0 (Size: 0) Light weight Size 01 (-position): 0.6kg Size 0 (-position): 0.18kg Flow rate 1000L/min
P+Z Engineering GmbH P+Z Engineering GmbH P+Z Engineering GmbH P+Z Engineering GmbH
ARRK Locations ARRK has facilities or centres of excellence located throughout Europe and around the rest of the world. Contact details for each of our European controlled companies / centres can be found
Slide Bearings Type HG
Innovative Power Transmission Slide Bearings Type HG Slide Bearings Type HG Type HG Slide Bearings Slide Bearings Type HG Locating bearings for horizontal hydro turbines operate under high axial loads,
Elevate the user experience with sleek and intuitive design
Elevate the user experience with sleek and intuitive design Aesthetic options for every project and price point. lutron.com/palladiom Understated elegance for where you work. Distinct character for where
HT, LT U.G. cables & PVC insulated Al wire
HT, LT U.G. cables & PVC insulated Al wire Sl.No Name of the firm s particulars Valid upto 1 M/s. Gloster s Ltd., Kallakal(Vi), Toopran(MN), Medak district, Andra Pradesh ( Ph No: 91-80-2372 2274,2837
Elevate the user experience with sleek and intuitive design
Elevate the user experience with sleek and intuitive design Aesthetic options for every project and price point. lutron.com/palladiom Keypad shown in Satin Nickel (SN) Understated elegance for where you
Options for the Ball Screw QZ Lubricator Wiper Ring W
Options for the Ball Screw Lubricator Wiper Ring W CATALOG No.322-1E OPTIONS For Ball Screws, dust-prevention and lubrication accessories are available. You can make a selection according to the application
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Drive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects
09.2007 / a 4183 en - 03.2008 / b Drive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects www.leroy-somer.com Drive systems
CONTINUED FROM PART 2
CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Airetool. Gas Line Cleaners Range: 3/4 (19.05mm) to 1-1/2 (38.10mm) Operating & Service Manual PL EN 10/01/2015
Operating & Service Manual PL9-6026EN 0/0/205 Airetool Gas Line Cleaners Range: 3/4 (9.05mm) to -/2 (38.0mm) For additional product information visit our website at http://www.apextoolgroup.com PL9-6026EN
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Slide Bearings Type EM 9S For Shaft Diameters 80, 90, 100 mm Main Application Field Electric Machines
Slide Bearings Type EM 9S For Shaft Diameters 80, 90, 100 mm Main Application Field Electric Machines Centre flange mounted slide bearing type EM 9S The RENK EM 9S bearing is a fully self-contained, centre
10R90 Series Light Duty Precision Turbine Grinder
Parts Manual 45-8043 10R90 Series Light Duty Precision Turbine Grinder CAUTION Do Not Lubricate This Tool! For additional product information visit our website at http://www.apextoolgroup.com 45-8043 Dotco
CONTINUED FROM 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in
(a) Name of Company : SHREE RANGAVADHUT ENGINEERS
SHREE RANGAVADHUT ENGINEERS No. 8, 1 st Floor, Dhamanwala Service Complex, Opp. S.B.I., G.I.D.C., PANDESARA, Surat-394 221. Tele : 0261-2891016 e-mail : info@srae.co.in / shreerangavadhut2003@yahoo.co.in
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Guide Ball Bushing NEW
NEW Guide Ball Bushing Contributes to compact the system Achieves load rating more than twice the Linear Bushing with the same dimensions (model LG-S) Various combinations of nut and shaft are available
Model T150SA Semi-Automatic Thermoplastic Screed Road Marking Machine
Model T150SA Semi-Automatic Thermoplastic Screed Road Marking Machine Technical Specification Paint tank :-Stainless steel tank with 150kgs capacity. -Heavy-duty paint tank gate welded to the tank for
Agilent 4UHV Ion Pump Controller. For Ultra High Vacuum
Agilent 4UHV Ion Pump Controller For Ultra High Vacuum The New Agilent 4UHV Ion Pump Controller The new state-of-the-art Agilent 4UHV Ion Pump Controller operates up to four pumps simultaneously and independently.
CONTINUED FROM PART 2
CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Iwaki Electromagnetic Metering Pump EWN-R (Chlorine Dioxide type)
Iwaki Electromagnetic Metering Pump EWN-R (Chlorine Dioxide type) Instruction manual Thank you for choosing our product. Please read through this instruction manual before use. This manual is intended
CONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
14TTA-2311 Pistol Grip Clecomatic Clutch Nutrunner
Parts Manual 14TTA-2311 Pistol Grip Clecomatic Clutch Nutrunner For additional product information visit our website at http://www.apextoolgroup.com Model Nomenclature A 14 T T A - 2311 Tool Series 14
One machine multiple applications.
One machine multiple applications. image 1 image 2 image 3 image 4 Manufacturing of engineering plastics. Processing of PVC. Manufacturing of TPE. Manufacturing of master batches. Coperion worldwide. >
Precision Motors for Infusion Systems. Optimized performance for reliability, versatility and patient comfort
Precision Motors for Infusion Systems Optimized performance for reliability, versatility and patient comfort Motor designs validated by decades of success in the field. For over 40 years, Portescap has
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Product Manual PL31-15LF 04/02/ LF Series Inline Grinders
Product Manual PL31-15LF 15LF Series Inline Grinders 15 L F 0 X X - XX NL Tool Series 15 = Drill Throttle Type L = Locking Lever Motor Size F = 0.4 hp Handle Style 0 = Straight Exhaust Type 5 = Front Exhaust
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Parts Manual PL EN 05/19/ L4321 Router. For additional product information visit our website at
Parts Manual 10L4321 Router For additional product information visit our website at http://www.apextoolgroup.com Product Information The original language of this manual is English. Product Safety Information:
KR15. LM Guide Miniature Actuator. KR Series Actuators with Integrated LM Guide and Ball Screw in a Compact Stainless Steel Body. CATALOG No.
LM Guide Miniature Actuator KR1 KR Series Actuators with Integrated LM Guide and Ball Screw in a Compact Stainless Steel Body US, EPC Patent pending CATALOG No.76E LM Guide Actuator KR1 Miniature LM Guide
Parts Manual EN PL30-12R04 07/21/ R04 Series 0.1 HP Inline Pencil Grinder
Parts Manual PL30-12R04 12R04 Series 0.1 HP Inline Pencil Grinder For additional product information visit our website at http://www.apextoolgroup.com Dotco Nomenclature 12 R 04 XX - X X Series 12 = Ergo
15K Series Extented Mini Right Angle Drill Attachment
Parts Manual PL30-2052EN 15K27-5172 Series Extented Mini Right Angle Drill Attachment For additional product information visit our website at http://www.apextoolgroup.com PL30-2052EN Dotco Nomenclature
NEW! Ultra EC Motors. Ultra performance in a complete family of brushless slotless miniature motors.
NEW! Ultra EC Motors Ultra performance in a complete family of brushless slotless miniature motors. No two applications are the same. One design definitely does not fit all. Not when your application has
PREVIEW. Fieldbus System for Distributed I/O NEW PRODUCTS
NEW PRODUCTS PREVIEW Fieldbus System for Distributed I/O! Dual Port EtherNet/IP TM Gateway controls up to 8 Valve Manifolds and 8 Input blocks Controls up to 128 Inputs and 128 Outputs Supports QuickConnect
10LF and 12LF Series Right Angle Grinders
Product Manual 10LF and 12LF Series Right Angle Grinders XX L F 2 XX - XX Tool Series 10 = Aluminum Housing 12 = Ergo Housing Throttle Type L = Locking Lever Motor Size F = 0.4 hp Handle Style 2 = Right
Installation instructions
www.somfy.com Sonesse 0 DCT Installation instructions Ref :505080A Please read installation instructions and programming instructions completely prior to proceeding with installation and programming. Failure
CONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
P+Z Engineering GmbH P+Z Engineering GmbH P+Z Engineering GmbH P+Z Engineering GmbH
ARRK Locations ARRK has facilities or centres of excellence located throughout Europe and around the rest of the world. Contact details for each of our European controlled companies / centres can be found
CRES. RoD Actuator. Low-cost and handy actuator Dustproof and waterproof design compliant with IP55 standard Compliant with the RoHS Directives
CRES07_3.3_OCF 13.4.19 11:33 ページ 2 www.thk.ru BERG AB тел. (495) 727-22-72 thk-mail@ya.ru RoD Actuator CRES Low-cost and handy actuator Dustproof and waterproof design compliant with IP55 standard Compliant
Slide Bearings Type E For Shaft Diameter Range mm Main Application Field Electric Machines
Slide Bearings Type E For Shaft Diameter Range 160-315 mm Main Application Field Electric Machines End flange mounted slide bearing type EFWF with water-cooling and lubrication by a fixed oil ring RENK
10N10 Series Inline Grinder
Parts Manual 0N0 Series Inline Grinder For additional product information visit our website at http://www.apextoolgroup.com Nomenclature and Specifications Product Type 0 = Aluminum Housing Grinder Throttle
Slide Bearings For Industrial, Marine And Offshore Installations
Slide Bearings For Industrial, Marine And Offshore Installations The advantages of working with RENK Hannover are many; here are a few of particular interest: RENK can boast a depth of experience in bearings
10N M6 Series Right Angle Grinder
Parts Manual PL30-2042EN 10N1200-36M6 Series Right Angle Grinder For additional product information visit our website at http://www.apextoolgroup.com PL30-2042EN Dotco Nomenclature and Specifications Product
12-10 Series Inline Grinder
Parts Manual 45-858EN 2-0 Series Inline Grinder Termination -36 Terminations -4 and -6 For additional product information visit our website at http://www.apextoolgroup.com 45-858EN Dotco Nomenclature and
N60 Rotary Vane Pneumatic Motor
Parts Manual PL70-1043EN 24-1312N60 Rotary Vane Pneumatic Motor For additional product information visit our website at http://www.apextoolgroup.com PL70-1043EN Cleco 24-1312N60 Rotary Vane Motor Model
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Accredited to ISO/IEC 17021-1:2015 to provide environmental 4th Floor Vivo Building 30 Stamford Street SE1 9LQ United Kingdom Contact: Mr
21L1341 Series Inline Vent Trimmer
Parts Manual 21L1341 Series Inline Vent Trimmer For additional product information visit our website at http://www.apextoolgroup.com Nomenclature Includes (Illustration "B") Model Vent Trimmer Drive Pinion
15D Series Pistol Grip and Inline Drills
Parts Manual 823144EN 15D Series Pistol Grip and Inline Drills For additional product information visit our website at http://www.apextoolgroup.com 823144EN Cleco Product Information The original language
CONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
4mm(H)x8mm(W) Micro LM Guides
4mm(H)x8mm(W) Micro LM Guides US, EPC, Patent Pending CATALOG No.293E Micro LM Guides RSR3M/3N The micro size allows space-saving design. Can be used in various fields of industry including micro machines
75RM-2024 Right Angle Fixtured Nutrunner
Instruction Manual PL12-1092EN 75RM-2024 Right Angle Fixtured Nutrunner For additional product information visit our website at http://www.apextoolgroup.com Cleco Product Information PL70-1092EN The original
Model T200A Fully-Automatic Self-propelled
Model T200A Fully-Automatic Self-propelled Thermoplastic Screed Road Marking Machine 150mm test line with the T200A Automatic Road Marking Machine Technical Specification 1) Engine : -Powered by HONDA
Roll Up WireFree IR. Installation instructions
www.somfy.com TM Roll Up WireFree IR Installation instructions Ref :5059844 Safety This Somfy product must be installed by a professional motorization and home automation installer, for whom these instructions
Sivoia QED. SVQ-10-PNL-230 Power Panel 230 V~ 50/60 Hz, 4 Amps maximum total current. Figure 1: Mounting Diagram and Dimensions.
Sivoia QED Installation Instructions Please Leave for Occupant Please read before installing. Important Notes 1. All wiring must be in accordance with national and local electrical codes. 2. This panel
LIST OF MOUs SIGNED BY GOVERNMENT OF TAMIL NADU
LIST OF MOUs SIGNED BY GOVERNMENT OF TAMIL NADU S.No Date Company Place Manufacturing Products 1. 07.06.2006 M/s. Motorola Sriperumputhur (U.S.A) SIPCOT Communication Equipments, Cell Phones & Accessories
BTS Fair of Shoes, Leather & Leather Goods in Poznan, Poland- August 29th to 31st A Report by Dr. Debasis De, Asst.
BTS Fair of Shoes, Leather & Leather Goods in Poznan, Poland- August 29th to 31st 2016. A Report by Dr. Debasis De, Asst. Director, CLE-ER Poland (Republic of Poland) is one of the countries in Central
HORIBA Jobin Yvon GmbH HORIBA Vietnam Company Limite ted Hea d Offi ce HORIBA ITALIA Srl Mil ano Office HORIBA Korea Ltd. Seoul Branch HORIBA Instruments Inc. Edison office HORIBA FRANCE SAS HORIBA India
WL SPARE PARTS. conveyor systems
WL SPARE PARTS conveyor systems Spare parts Conveyor system WL 2 FlexLink Spare parts catalogue Spare parts Conveyor system WL Copyright FlexLink 2012 The contents of this publication are the copyright
A6R-2218 Reversible Axial Piston Power Motors
Instruction Manual A6R-2218 Reversible Axial Piston Power Motors For additional product information visit our website at http://www.apextoolgroup.com Nomenclature Model Number Maximum Allowable RPM * Stall
P7 Aftermarket Parts List. Insist on Genuine
P7 Aftermarket Parts List Insist on Genuine Parts Page 2 At Cummins Generator Technologies, it's not just the products we make that set us apart it's how we engage our customers everyday. The unique combination
Magnetic drive pumps A worldwide best-seller, our high-quality compact magnetic drive pumps
MD series Magnetic drive pumps A worldwide best-seller, our high-quality compact magnetic drive pumps Main material Magnetic drive seal-less pumps are free from leakage problems and the need for seal replacement.
2 Coils. We Enable Energy
Coils 2 Coils We Enable Energy As one of the oldest industrial companies in Switzerland, founded in 1803, we focus on products and systems for power generation, transmission and distribution, rotating
Electrolab (India) Pvt. Ltd established in 1984 manufactures pharmaceutical testing equipments and peristaltic pumps which are used in several
Electrolab (India) Pvt. Ltd established in 1984 manufactures pharmaceutical testing equipments and peristaltic pumps which are used in several industries. Electrolab (India) Pvt. Ltd exports 40% of its
4CKNYC[A2 A2 AKPFGZ GRU AXLE RAIL / 02
P641G RAILWAY INDEX Mitsubishi Materials is constantly engaging ultra modern technologies in the research and development of cutting tools. Results of the research provide solutions for the ever increasing
INDIA S LEADING ROOFTOP SOLAR SOLUTIONS PROVIDER 1GW ANNUAL MODULE PRODUCTION CAPACITY
INDIA S LEADING ROOFTOP SOLAR SOLUTIONS PROVIDER 1GW ANNUAL MODULE PRODUCTION CAPACITY VIKRAM SOLAR WHO WE ARE Vikram Solar is a globally recognised reliable solar energy solutions provider, specialising
It s not Rocket Science to Reach Higher Coating Efficiency.
It s not Rocket Science to Reach Higher Coating Efficiency. PlasACRYL T20 makes it possible. EUDRAGIT Technical Formulation GMP Proof of Advanced Products Support 1 2 3 4 5 6 Development Services Concept
Max. flow capacity of 5,000 L/min and max. discharge head of 98m. The world s largest class fluoroplastic magnetic drive pump.
MDW series Magnetic drive pumps Max. flow capacity of 5,000 L/min and max. discharge head of 98m. The world s largest class fluoroplastic magnetic drive pump. The MDW series are the largest class fluoroplastic
UNIVERSAL. The Ultimate Performance CMM
UNIVERSAL The Ultimate Performance CMM UNIVERSAL Extruded Bridge Beam with Dovetail Guideways Ultra Rigid Advanced Alloy Platform Dynamic Wireless Thermal CMM & Part Compensation 90mm x 90mm Z Ram Cross-Section
Instruction Sheet. Modular Air Pumps IMPORTANT RECEIVING INSTRUCTIONS DESCRIPTION
Instruction Sheet Modular Air Pumps L2202 Rev. O 06/97 IMPORTANT RECEIVING INSTRUCTIONS Visually inspect all components for shipping damage. If any shipping damage is found, notify carrier at once. Shipping
Parts Manual. cascade
c Parts Manual Model Serial Number Fork Positioner 100D-FPB-04C R1 cascade corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com Base Unit Group 1 2 3
Quality and Service worldwide. Hydraulic Accessories Flow Indicators
Quality and Service worldwide Hydraulic Accessories Flow Indicators Distributor Walter Stauffenberg GmbH & Co. KG P.O.Box 1745 D-58777 Werdohl Im Ehrenfeld 4 D-58791 Werdohl Tel. : + 49 (0) 2392 916-0
Ready for the challenge
Ready for the challenge Summer Tyres From Matador MP 47 Hectorra 3 MP 82 Conquerra 2 MP 72 Izzarda A/T 2 MPS 330 Maxilla 2 Rain happens. Aquaplaning doesn t have to. Change your tyres at 3 mm. Aquaplaning
corteco a WiDE range of SErvicES tailored to customer needs.
corteco a WiDE range of SErvicES tailored to customer needs. CustoMEr-oriEntEd MarkEting global presence, CLosE proximity Continuous range development Integrated quality and technical department for each
Repair Parts Sheet IPA-2521 IPE-2505 IPE-2510 IPH-2530 IPH-2531 A UNIT OF APPLIED POWER INC. L1272 Rev. E 11/07
Repair Parts Sheet A UNIT OF APPLIED POWER INC. L7 Rev. E /07 IPA IPE0 IPE0 IPH0 IPH Accessories: Press Conversion Kit IPK0 VBlocks A0 Model Pump Cylinder IPA PAM0 Twin Air Pump RC IPE0 PUJ00B Electric
WORLD MOTOR VEHICLE PRODUCTION BY COUNTRY AND TYPE QUARTERS June 14, 2018
QUARTERS 2017-2018 June 14, 2018 CONTENTS BASEPROTOTAL BASEPROCARS BASEPROLCV BASEPROHCV BASEPROBC Summation of cars, LCVs, HCVs, heavy buses Cars LCVs HCVs Heavy buses Note: The production of cars and
Magnetic drive pumps. A worldwide best-seller, our high-quality compact magnetic drive pumps GFRPP. Magnetic drive pumps. series.
MD series Magnetic drive pumps A worldwide best-seller, our high-quality compact magnetic drive pumps Magnetic drive pumps Main material Magnetic drive seal-less pumps are free from leakage problems and
You ll find many Tsubaki products being
You ll find many Tsubaki products being There are many processes involved in making a motor vehicle. You ll find Tsubaki products in all of these processes, from conveying vehicle bodies from the stockyard,
Semi-Automatic Filters
Semi-Automatic Filters Quick and efficient way to clean manual filters filtration degrees scanaway filtration degrees brushaway supported diameters 500-80 micron 3,500-200 micron 50-200 mm (2-8 ) maximum
Our cleaning science gets you back to business faster. Chematic Cleaners
Our cleaning science gets you back to business faster Chematic Cleaners Chematic Cleaners Achieve significant time and cost savings by using Chematic for effective cleaning processes. Clear view on the
Parts Manual EN PL /18/ L41 Series Inline Extended Grinders
Parts Manual 45-8188EN PL30-850 12L41 Series Inline Extended Grinders For additional product information visit our website at http://www.apextoolgroup.com 45-8188EN Dotco Nomenclature 12 L 4 1 XX - XX
DEPARTMENT OF TRANSPORTATION. National Highway Traffic Safety Administration. [Docket No. NHTSA ] Notice of Buy America Waiver
![DEPARTMENT OF TRANSPORTATION. National Highway Traffic Safety Administration. [Docket No. NHTSA ] Notice of Buy America Waiver](/thumbs/88/114888354.jpg "DEPARTMENT OF TRANSPORTATION. National Highway Traffic Safety Administration. [Docket No. NHTSA ] Notice of Buy America Waiver")
This document is scheduled to be published in the Federal Register on 03/10/2016 and available online at http://federalregister.gov/a/2016-05371, and on FDsys.gov DEPARTMENT OF TRANSPORTATION National
Bearings for the Cement and Ready-Mix Concrete Industries
Bearings for the Cement and Ready-Mix Concrete Industries Market leading NSK technology that increases bearing life and reduces maintenance costs and downtime. Upgrading to NSK takes your operation to
Parts Manual EN
Parts Manual 45-8213EN PL30-1212 12L12 and 12S12 Series 0.3 HP Right Angle Grinder/Sander For additional product information visit our website at http://www.apextoolgroup.com 45-8213EN Dotco Nomenclature
High Accuracy Wire Electrical Discharge Machines
Equipment and Construction Work for Machine Installation 1. Floor area and foundation work 4. Electrical work W32FB W53FB 2. Factory air-conditioning equipment Recommended optimal temperature 20 1 Heat
OECD unemployment rate stable at 5.8% in August 2017
OECD unemployment rate stable at 5.8% in August 017 The OECD unemployment rate was stable at 5.8% in August 017, unchanged since May. Across the OECD area, 36.1 million people were unemployed, 3.5 million
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published