CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
|
|
|
- Kelley Ferguson
- 5 years ago
- Views:
Transcription
1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in the Official Journal of The Patent Office. This Journal is being published on weekly basis on every Friday covering the various proceedings on Designs as required according to the provisions of under Rule 22, 25, 27 and 39 of the Design (Amendment) Rules, All the enquiries on this Official Journal and other information as required by the public should be addressed to the Controller General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that the content can be enriched. The Patent Office Journal 16/09/
2 COPYRIGHT PUBLICATION SL NO CASE NUMBERS RENEWED ON The Patent Office Journal 16/09/
3 REGISTRATION OF DESIGNS The following designs have been registered. They are now open for public inspection. In the following each entry the Date of Registration is shown. The Number, Date and Country are also shown Design Number Class )Reckitt Benckiser (Australia)Pty Limited 44 Wharf Road West Ryde New South Wales 2114, Australia Date of Registration 10/04/2006 Insecticide Refill Device Number Date Country /10/2005 EUROPEAN UNION Design Number Class )Kubota Corporation 2-47,Shikitsuhigashi1-Chome Naniwa-Ku,Osaka-shi,Osaka, Japan. Date of Registration 08/03/2007 Tractor Number Date Country /09/2006 Japan Design Number Class )Legrand France 128, Avenue Du Marechal De Lattre-De-Tassigny, Fr Limoges (France) Date of Registration 04/06/2007 Plate For Electrical Number Date Country /12/2006 OHIM The Patent Office Journal 16/09/
4 Design Number Class )Legrand France 128, Avenue Du Marechal De Lattre-De-Tassigny, Fr Limoges (France). Date of Registration 04/06/2007 Electrical Switch Board Containing Switch & Socket Number Date Country /12/2006 OHIM Design Number Class )Legrand France. 128, Avenue Du Marechal De Lattre-De-Tassigny, Fr Limoges (France) Date of Registration 04/06/2007 Electrical Switch Board Containing Switch Number Date Country /12/2006 OHIM Design Number Class )Jung, Jong Pil. 1006, Buguk Apartment, 565 Chwiam-Dong,Nonsan-Si, Chungcheongnam-Do, Republic of korea. Date of Registration 05/06/2007 Sensor ring for anti-lock brake system. Number Date Country 29/279,646 16/03/2007 Korea(South) The Patent Office Journal 16/09/
5 Design Number Class )Gardex C-7 Focal Point, Jalandhar , Punjab-India Date of Registration 31/08/2010 Handle of Hammer Design Number Class )Ravissant Pvt. Ltd., 50-51, Commercial Complex, New Friends Colony, New Delhi Date of Registration 31/08/2010 Tray Design Number Class )Ravissant Pvt. Ltd., 50-51, Commercial Complex, New Friends Colony, New Delhi Date of Registration 31/08/2010 Photo Frame The Patent Office Journal 16/09/
6 Design Number Class )Tetra Laval Holdings & Finance S.A., 1009 Pully (Switzerland) Avenue General-Guisan, 70, Switzerland. Date of Registration 07/12/2010 Packaging Box Number Date Country /06/2010 OHIM Design Number Class )Kayempee Foods Private Limited 14/P, CIE Gandhi Nagar, Kukatpally,Hyderabad Andhra Pradesh, India. Date of Registration 14/12/2010 Chocolate Design Number Class )Kayempee Foods Private Limited 14/P, CIE Gandhi Nagar, Kukatpally,Hyderabad Andhra Pradesh, India Date of Registration 14/12/2010 Chocolate The Patent Office Journal 16/09/
7 Design Number Class )Jayco Whistle Co., Jayco Whistle Co., Upper Fort, 9/33, Tandan Para, Aligarh. Date of Registration 04/02/2011 Whistle Design Number Class )Thatamakula Bhargavi Reddy T. Challimamdi (P&V) B. Kothakota (MD) Madanapalli(JH) Chittoor(Dist) AD India Date of Registration 04/02/2011 Data Processing Equipment Design Number Class )Research In Motion Limited 295 Phillip Street, Waterloo, Ontario N2L 3W8, Canada Date of Registration 10/02/2011 Portable Electronic Device Number Date Country 29/ /08/2010 U.S.A. The Patent Office Journal 16/09/
8 Design Number Class )Flair Writing Instruments 63 B/c, Govt. Industrial Estate, Charkop, Kandivali (W) Mumbai (Maharashtra) India Date of Registration 29/04/2011 Pen Design Number Class )Honda Motor Co.Ltd 1-1 Minami-Aoyama 2-Chome, Minato-Ku, Tokyo , Japan Date of Registration 29/11/2006 Motor Scooter Number Date Country /05/2006 Japan Design Number Class )Honda Motor Co. Ltd., 1-1, Minami- Aoyama 2 - chome, Minato-Ku, Tokyo, , Japan. Date of Registration 29/11/2006 Headlight of Motor Scooter Number Date Country /05/2006 Japan The Patent Office Journal 16/09/
9 Design Number Class )Hindustan Unilever Ltd. Hindustan Lever House Backbay Reclamation, Mumbai , Maharashtra, India. Date of Registration 14/12/2010 Block for Toilet Bowl Number Date Country /06/2010 OHIM Design Number Class )Kayempee Foods Private Limited 14/P, CIE Gandhi Nagar, Kukatpally, Hyderabad Andhra Pradesh, India Date of Registration 20/12/2010 Chocolate Design Number Class )Seiko Epson Corporation 4-1, Nishishinjuku 2-chome, Shinjuku-ku, Tokyo, , Japan Date of Registration 15/03/2011 Container Cap With Stopper Number Date Country /09/2010 Japan The Patent Office Journal 16/09/
10 Design Number Class )Manika Moulds Pvt. Ltd., Aar-Pee Centre, , 6th Floor Guffic Compound, MIDC, Andheri(E), Mumbai , Maharashtra, India Date of Registration 22/03/2011 Battery Container Design Number Class )Uster Technologies AG., A Wilstrasse 11, CH-8610 Uster, Switzerland, Date of Registration 08/09/2005 Console or Support For The Yarn Tester Number Date Country /10/2005 Switzerland Design Number Class )Ssl Healthcare Italia S.p.A Via Emilio Lepido, 178/5-I40132 Bologna (BO), Italy Date of Registration 09/08/2010 Sole For Footwear Number Date Country DM/ /02/2010 WIPO The Patent Office Journal 16/09/
11 Design Number Class )Ceasan Glass Pvt. Ltd., Flat No.S-3, 2nd Floor Iswarya Apartment, Opp. District Court, Ongole , A.P, India Date of Registration 16/08/2010 Roller For Manufacturing Glass Sheet Design Number Class )Patel Industries Morarinagar-4, Avadh Kothariya Main Road, Nr. Babariya Colony, Haridhara Road, Rajkot-Gujarat (India) Date of Registration 19/08/2010 Hinge Design Number Class )BorgWarner Inc., 3850 Hamlin Road, Auburn Hills, Michigan 48326, U.S.A., Date of Registration 03/11/2010 Fan Blade Number Date Country 29/361, /05/2010 U.S.A. The Patent Office Journal 16/09/
12 Design Number Class )Sulzer Pumpen Ag., Zurcherstrasse 12, CH-8401 Winterthur, Switzerland Date of Registration 04/11/2010 Pump Casing Number Date Country 29/361, /05/2010 U.S.A. Design Number Class )Biju Karnam Kuruvampadathu (H), Okkal P.O., Kalady, Ernakulam District, Kerala, India Date of Registration 04/11/2010 Soap Dish Design Number Class )Biju Karnan Kuruvampadathu (H), Okkal P.O., Kalady, Ernakulam District, Kerala, India. Date of Registration 04/11/2010 Soap Box The Patent Office Journal 16/09/
13 Design Number Class )Columbia Sportswear North America, Inc., NW Science Park Drive, Portland, Oregon 97229, USA Date of Registration 04/11/2010 Garment Number Date Country 29/361, /05/2010 U.S.A. Design Number Class )Laporte Holding 357 Allee Du Val De Pome, biot, France Date of Registration 08/11/2010 Bow Target Number Date Country /11/2010 OHIM Design Number Class )LG Hausys, Ltd., Korean Corporation, 20, Yeouidi-dong, Yeongdeungpo-gu, Seoul, Rapublic of Korea Date of Registration 08/11/2010 Fixing Member For Window And Door Frame Number Date Country KR /06/2010 Republic of Korea The Patent Office Journal 16/09/
14 Design Number Class )OraMedix, Inc., 339, East Avenue K8, Suite 117 Lancaster, CA , USA Date of Registration 12/11/2010 Travel Folding Toothbrush Design Number Class )S. V. SALES CORPORATION Plot No. 33 to 36, Block No. 149, Village:- Tatithaiya , Taluka-Palasana, District-Surat, Gujarat., Date of Registration 18/01/2011 Woven Fabrics Design Number Class )Aseptic Technologies Belgium, of Rue Camille Hubert, 7-9, B-5032 Isnes, Belgium Date of Registration 19/01/2011 Vial Number Date Country /07/2010 OHIM The Patent Office Journal 16/09/
15 Design Number Class )ITC Limited Virginia House, 37, J.L. Nehru Road, Kolkata , West Bengal, India Date of Registration 21/01/2011 Cigarette Pack Design Number Class )Mil Laboratories Pvt. Ltd., Plot No. 315, Brij Bhoomi, B-Wing, B/h Canara Bank, Nehru Road, Vile Parle (East), Mumbai , Maharashtra, (India) Date of Registration 25/01/2011 Absorbable Gelatin Sponge Design Number Class )3m Innovative Properties Company., 3M Center, Saint Paul, Minnesota , USA., Date of Registration 25/01/2011 Nozzle Collar Number Date Country 29/366, /07/2010 U.S.A. The Patent Office Journal 16/09/
16 Design Number Class )Parksons Packaging Limited 41/B, Lalbaug Estate, Dr.Ambedkar Road, Lalbaug, Mumbai , Maharashtra, India Date of Registration 31/03/2011 Carton Design Number Class )Parksons Packaging Limited 41/B, Lalbaug Industrial Estate, Dr.Ambedkar Road, Lalbaug, Mumbai , Maharashtra, India. Date of Registration 31/03/2011 Carton Design Number Class )Tube Investments of India Limited "DARE HOUSE", 234, N.S.C. Bose Road, Chennai , State of Tamil Nadu, India Date of Registration 31/03/2011 Pedal For Bicycle The Patent Office Journal 16/09/
17 Design Number Class )Tube Investments of India Limited "DARE HOUSE", 234, N.S.C. Bose Road, Chennai , State of Tamil Nadu, India Date of Registration 31/03/2011 Carrier For Bicycle Design Number Class )Tube Investments of India Limited "DARE HOUSE", 234, N.S.C. Bose Road, Chennai , State of Tamil Nadu, India Date of Registration 31/03/2011 Carrier For Bicycle Design Number Class )Tube Investments of India Limited "DARE HOUSE", 234, N.S.C. Bose Road, Chennai , State of Tamil Nadu, India Date of Registration 31/03/2011 Frame For Bicycle The Patent Office Journal 16/09/
18 Design Number Class )Dev Marketing Nr Bhilai Way, Bridge Furniture Street, Jilla Garden Main Road, Bapunagar, Rajkot - Gujrat (India) Date of Registration 05/04/2011 Handle Design Number Class )Shah Plastic Works 13063, Street No. 4 Janata Nagar, Bhagwan Chowk Ludhiana (Punjab) India. Date of Registration 05/04/2011 Pedal For Bicycles & Rickshaws Design Number Class )Panasonic Corporation Oaza Kadoma, Kadoma Shi Osaka , Japan Date of Registration 05/04/2011 Microwave Oven The Patent Office Journal 16/09/
19 Design Number Class )Mahindra Navistar Automotives Limited Mahindra Towers, 3rd Floor G. M. Bhosale Marg Worli, Mumbai Maharashtra, India. Date of Registration 05/04/2011 Rear Axle Hub For Vehicle Design Number Class )Anjana Vij A-23, Gujranwala Town Part-1st, Delhi Date of Registration 07/04/2011 Floor Wiper Design Number Class )Manak Petro-chem (India) Aminagar, Sarai Road, Baraut, U.P., (India) Date of Registration 07/04/2011 Container The Patent Office Journal 16/09/
20 Design Number Class )Shri Ganesh Industries T-3/ , Mangolpuri, Phase-1, Delhi , (India) Date of Registration 07/04/2011 Footwear Design Number Class )Shri Ganesh Industries T-3/ , Mangolpuri, Phase-1, Delhi , (India) Date of Registration 07/04/2011 Footwear Design Number Class )Shri Ganesh Industries T-3/ , Mangolpuri, Phase-1, Delhi , (India) Date of Registration 07/04/2011 Footwear The Patent Office Journal 16/09/
21 Design Number Class )Shri Shyam FootWear T-1/188, Phase 1 Mangolpuri Industrial Area Delhi (India) Date of Registration 07/04/2011 Footwear Design Number Class )Pearl Polymers Limited 204 Rohit House 3 Tolstoy Marg New Delhi India Date of Registration 08/04/2011 Bottle Design Number Class )Jcb India Limited B-1/1-1, 2nd Floor, Mohan co-operative Industrial Estate, Mathura Road, New Delhi, India and works at 23/7, Mathura Road, Ballabgarh, Haryana, India Date of Registration 11/04/2011 Engine Cover Of Wheel Loading Shovel The Patent Office Journal 16/09/
22 Design Number Class )M/s Homeline Products., B-106, Virwani Industrial Estate, goregaon (East), Mumbai , Maharashtra, India Date of Registration 12/04/2011 Bottle Design Number Class )M/s Homeline Products B-106, Virwani Industrial Estate, Goregaon (East), Mumbai , Maharashtra, India Date of Registration 12/04/2011 Bottle Design Number Class )Matharu Engg Co. #10465, St. No.5, Bhagwan Chowk, Janta Nagar Ludhiana (Punjab) Date of Registration 21/09/2010 Sewing Machine Stand The Patent Office Journal 16/09/
23 Design Number Class )Raumplus GmbH & Co. KG, Dortmunder Strasse 35, Bremen, Germany Date of Registration 24/09/2010 Fittings For Doors, Windows And/Or Furniture Number Date Country DM/ /03/2010 WIPO Design Number Class )M/s Commercial Vehicle Group, Inc., 7800 Walton Parkway, New Albany, Ohio 43220, United States Date of Registration 28/09/2010 Vehicle Seat Design Number Class )Koninklijke Philips Electronics N.V., Groenewoudseweg 1, 5621 Ba Eindhoven, The Netherlands Date of Registration 06/01/2011 Attachment For Hair Clipper Number Date Country /07/2010 OHIM The Patent Office Journal 16/09/
24 Design Number Class )Ma Design India Private Limited., C-26, Sector 63, Noida , U.P., India. Date of Registration 07/01/2011 Champagne Bucket Design Number Class )Ma Design India Private Limited., C-26, Sector 63, Noida , U.P., India. Date of Registration 07/01/2011 Decorative Article Design Number Class )Ma Design India Private Limited., C-26, Sector 63, Noida , U.P., India. Date of Registration 07/01/2011 Server (To Serve Cake) The Patent Office Journal 16/09/
25 Design Number Class )Ozone Overseas Ltd., H-40, Bali Nagar, New Delhi , India Date of Registration 10/01/2011 Glass Clamp Design Number Class )Koninklijke Philips Electronics N.V., Groenewoudseweg 1, 5621 Ba Eindhoven, The Netherlands Date of Registration 11/01/2011 Handle For Body Shaver Number Date Country /07/2010 OHIM Design Number Class )Elgi Ultra Industries Limited 1443/1, India House, Trichy Road, Coimbatore , Tamil Nadu, India Date of Registration 11/01/2011 Pressure Cooker The Patent Office Journal 16/09/
26 Design Number Class )Elgi Ultra Industries Limited 1443/1, India House, Trichy Road, Coimbatore , Tamil Nadu, India Date of Registration 11/01/2011 Pressure Cooker Design Number Class )Elgi Ultra Industries Limited 1443/1, India House, Trichy Road, Coimbatore , Tamil Nadu, India Date of Registration 11/01/2011 Pressure Cooker Design Number Class )Biba Apparels Pvt. Ltd., 45-54, "Whitehall", Kemps Corner, 143 A.K. Marg., Mumbai , Maharashtra, India Date of Registration 28/03/2011 Textile Fabric The Patent Office Journal 16/09/
27 Design Number Class )Biba Apparels Pvt. Ltd., 45-54, "Whitehall", Kemps Corner, 143 A.K. Marg., Mumbai , Maharashtra, India Date of Registration 28/03/2011 Textile Fabric Design Number Class )Biba Apparels Pvt. Ltd., 45-54, "Whitehall", Kemps Corner, 143 A.K. Marg., Mumbai , Maharashtra, India Date of Registration 28/03/2011 Textile Fabric Design Number Class )Biba Apparels Pvt. Ltd., 45-54, "Whitehall", Kemps Corner, 143 A.K. Marg., Mumbai , Maharashtra, India Date of Registration 28/03/2011 Textile Fabric The Patent Office Journal 16/09/
28 Design Number Class )Crompton Greaves Limited., Avantha House, 6th Floor, Dr. Annie Besant Road, Worli, Mumbai , Maharashtra, India Date of Registration 31/03/2011 Transformer Tank Design Number Class )Crompton Greaves Limited., Avantha House, 6th Floor, Dr. Annie Besant Road, Worli, Mumbai , Maharashtra, India Date of Registration 31/03/2011 Regulator for Fan Design Number Class )Crompton Greaves Limited., Avantha House, 6th Floor, Dr. Annie Besant Road, Worli, Mumbai , Maharashtra, India Date of Registration 31/03/2011 Lighting Fixture The Patent Office Journal 16/09/
29 Design Number Class )Crompton Greaves Limited., Avantha House, 6th Floor, Dr. Annie Besant Road, Worli, Mumbai , Maharashtra, India Date of Registration 31/03/2011 Packaging System For Geysers. Design Number Class )Yash Agarwal 9, Laxmi Complex, M.I. Road, Jaipur (Raj) Date of Registration 03/03/2011 Earring Design Number Class )Yash Agarwal 9, Laxmi Complex, M.I. Road, Jaipur (Raj) Date of Registration 03/03/2011 Earring The Patent Office Journal 16/09/
30 Design Number Class )Yash Agarwal 9, Laxmi Complex, M.I. Road, Jaipur (Raj) Date of Registration 03/03/2011 Earring Design Number Class )Yash Agarwal 9, Laxmi Complex, M.I. Road, Jaipur (Raj) Date of Registration 03/03/2011 Earring Design Number Class )Yash Agarwal 9, Laxmi Complex, M.I. Road, Jaipur (Raj) Date of Registration 03/03/2011 Earring The Patent Office Journal 16/09/
31 Design Number Class )Yash Agarwal 9, Laxmi Complex, M.I. Road, Jaipur (Raj) Date of Registration 03/03/2011 Earring Design Number Class )Yash Agarwal 9, Laxmi Complex, M.I. Road, Jaipur (Raj) Date of Registration 03/03/2011 Earring Design Number Class )Ricoh Company, Ltd., 3-6, Nakamagome 1-Chome, Ohta-Ku, Tokyo , Japan Date of Registration 03/03/2011 Integrated Circuit Tag Number Date Country /02/2011 Japan The Patent Office Journal 16/09/
32 Design Number Class )Liberty Shoes Limited., Liberty Puram, 13, Milestone, GT karnal Road, Kutail, DT-Karnal , Haryana, India Date of Registration 03/03/2011 Sole For Footwear Design Number Class )Honda Motor Co.Ltd 1-1 Minami-Aoyama 2-Chome, Minato-Ku, Tokyo , Japan Date of Registration 16/05/2005 Motorcycle Number Date Country /05/2005 Japan Design Number Class )Hansgrohe Ag., 5-9, D Schiltach, Germany Date of Registration 29/05/2006 Body of A Sanitary Faucet Number Date Country /11/2005 OHIM The Patent Office Journal 16/09/
33 Design Number Class )Vizirama 112 (Proprietary) Ltd. 34 Consititution Road, Ultenhage, 6229, Eastern Cape Province,Republic Of South Africa Date of Registration 23/08/2007 Lamp Holder With Reflector Design Number Class )Crompton Greaves Limited., 6th Floor, Cg House, Dr Annie Besant Road, Worli, Mumbai , Maharashtra, India. Date of Registration 09/02/2009 Lighting Fixture Design Number Class )Veena Kataria C-13/D, Avantika Enclave, Avantika X-Ing, Delhi India Date of Registration 19/10/2010 Covered Cycle Rickshaw. The Patent Office Journal 16/09/
34 Design Number Class )Manisha Industries 40, Shriram Industrial Estate, Anup Engineering Compound, B/H.C.M.C. Odhav Road, Ahmedabad , Maharashtra India Date of Registration 15/11/2010 Ball Valve-To Control The Flow Design Number Class )Mahotsav Creation Pvt. Ltd., "Mahotsav House" No.6, Rathi Palace, Ring Road, Surat , Gujarat. Date of Registration 16/11/2010 Saree and Blouse Set Design Number Class )Mahotsav Creation Pvt. Ltd., "Mahotsav House" No.6, Rathi Palace, Ring Road, Surat , Gujarat. Date of Registration 16/11/2010 Saree and Blouse Set The Patent Office Journal 16/09/
35 Design Number Class )Itc Limited Virginia House, 37, J.L. Nehru Road, Kolkata , West Bengal, India Date of Registration 16/11/2010 Cigarette Pack Design Number Class )Itc Limited Virginia House, 37, J.L. Nehru Road, Kolkata , West Bengal, India Date of Registration 16/11/2010 Cigarette Pack Design Number Class )Brita GmbH Heinrich-Hertz-StraBe 4, Taunsstein, Germany Date of Registration 18/11/2010 Container Number Date Country /05/2010 Germany The Patent Office Journal 16/09/
36 Design Number Class )Milltec Machinery Private Limited No. 51-A, 1st Phase KIADB Indl Area, Bommasandra, Bangalore , State of Karnataka, India Date of Registration 23/11/2010 Length Grader for Grains Design Number Class )Hindustan Unilever Limited Hindustan Lever House Backbay Reclamation, Mumbai , State of Maharashtra, India Date of Registration 22/02/2011 Water Purifier Number Date Country /09/2010 OHIM Design Number Class )Yash Agarwal 9, Laxmi Complex, M.I. Road, Jaipur (Raj)., India Date of Registration 03/03/2011 Necklace and Earrings Set The Patent Office Journal 16/09/
37 Design Number Class )ABB TECHNOLOGY AG. AFFOLTERNSTRASSE 52, CH-8050 ZURICH, Switzerland. Date of Registration 08/06/2007 Substation Automation Device Design Number Class )SDI CORPORATION., NO. 260, SEC.2, CAHNG NAN ROAD, CHANG HUA, TAIWAN, R.O.C., Date of Registration 03/03/2009 STAPLER Design Number Class )Leister Process Technologies Galileo-Strasse 10, CH-6056 Kaegiswil, Switzerland Date of Registration 28/12/2010 Stationary Welding Apparatus Number Date Country /12/2010 OHIM The Patent Office Journal 16/09/
38 Design Number Class )JAD Internatinal Plot No. 120, Sector-4, Pocket-B, DSIDC, Bawana, Delhi , India Date of Registration 03/01/2011 Container Design Number Class )Dorma India Private Limited 14, Pattulous Road, Chennai , Tamil Nadu, India Date of Registration 22/03/2011 Metal Fitting - Glass Link (Two Arm) Design Number Class )Dorma India Private Limited 14, Pattulous Road, Chennai , Tamil Nadu, India Date of Registration 22/03/2011 Metal Fitting - Rod Holder The Patent Office Journal 16/09/
39 Design Number Class )Crompton Greaves Limited., Avantha House, 6th Floor, Dr. Annie Besant Road, Worli, Mumbai , Maharashtra, India Date of Registration 28/03/2011 Lighting Fixture Design Number Class )Crompton Greaves Limited., Avantha House, 6th Floor, Dr. Annie Besant Road, Worli, Mumbai , Maharashtra, India Date of Registration 28/03/2011 Pump Design Number Class )Crompton Greaves Limited., Avantha House, 6th Floor, Dr. Annie Besant Road, Worli, Mumbai , Maharashtra, India Date of Registration 28/03/2011 Pump The Patent Office Journal 16/09/
40 Design Number Class )Biba Apparels Pvt. Ltd., 45-54, "Whitehall", Kemps Corner, 143 A.K. Marg., Mumbai , Maharashtra, India Date of Registration 28/03/2011 Textile Fabric Design Number Class )Biba Apparels Pvt. Ltd., 45-54, "Whitehall", Kemps Corner, 143 A.K. Marg., Mumbai , Maharashtra, India Date of Registration 28/03/2011 Textile Fabric Design Number Class )Flos S.p.A. Via A, Faini, 2, Bovezzo, Brescia, Italy Date of Registration 08/10/2010 Lighting Device Number Date Country BS2010O /04/2010 Italy The Patent Office Journal 16/09/
41 Design Number Class )Yoshiritsu Kabushiki Kaisha 1563, Koshibe, Oyodo-cho, Yoshino-gun, Nara, Japan Date of Registration 29/11/2010 Toy Block Number Date Country /06/2010 Japan Design Number Class )M/s Gaurav Oil Mills House no Sector-7C, Faridabad (Haryana) Date of Registration 30/11/2010 Bottle Design Number Class )Sunflame Enterprises Pvt. Ltd. 58, Sector 27-C, Mathura Road Faridabad Haryana, India. Date of Registration 01/12/2010 Electric Light Weight Iron The Patent Office Journal 16/09/
42 Design Number Class )Ma Design India Pvt. Ltd., C-26, Sector 63, Noida , U.P., India Date of Registration 03/12/2010 Holder (For Sugar) Design Number Class )Aira Euro Automation Pvt. Ltd., Plot No Aira Estate, B/h. Security Estate, Nr. Kashiram Textile Mills, Narol Road, Ahmedabad Gujarat-India., Date of Registration 11/02/2011 Valve (Locking Device) Design Number Class )Kartar Agro Industries (P) Ltd., Amloh Road, Bhadson, Dist, Patiala (Punjab), India, Date of Registration 11/02/2011 Knotter Machine The Patent Office Journal 16/09/
43 Design Number Class )Godrej & Boyce Mfg. Co. Ltd., Division: Interio, of Pirojshangar, vikhroli, Mumbai , Maharsahtra, India Date of Registration 19/04/2011 Hospital Bed The Patent Office Journal 16/09/
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 2
CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 3
CONTINUED FROM PART 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 2
CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
DC MOTORS. Crompton Greaves EVERYDAY SOLUTIONS
Crompton Greaves EVERYDAY SOLUTIONS DC MOTORS LT MOTORS DIVISION A - 6/2, M.I.D.C., AHMEDNAGAR - 414111. MAHARASHTRA. TEL : +91 (0241) 2776 151-154, 2776146, 2776187. FAX : +91 (0241) 2777508 INTRODUCTION
CONTINUED FROM 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Maximum retail price list. For SIBCO range of bearing housings and accessories Bearing housings, sleeves, locknuts, lock washers and locating rings
Maximum retail price list For SIBCO range of bearing housings and accessories Bearing housings, sleeves, locknuts, lock washers and locating rings Effective from 1 st April, 2017 Engineered for optimized
Table 6.15: Horse power-wise models of tractors and power tillers available in India (as on March 2016)
Table 6.15: Horse power-wise models of tractors and power tillers available in India (as on March 2016) S.No. Tractor company / model 1.0 New Holland Tractors, Gautam Budh Nagar, Uttar Pradesh 1.1 Tractor
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
AUTHORITY FOR ADVANCE RULINGS (INCOME TAX)
DATE: 26.12.2016 (Monday) 1 AAR/971/2010 LG Electronics India Pvt. Ltd.,Greater Noida (UP) S245R(2) CIT (IT), Noida 2 AAR/1064/2011 The Goodyear Tire & Rubber Company, USA S245R(2) CIT(IT) - 2, ND 3 AAR/1214/2011
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART-1
CONTINUED FROM PART-1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
15K Series Extented Mini Right Angle Drill Attachment
Parts Manual PL30-2052EN 15K27-5172 Series Extented Mini Right Angle Drill Attachment For additional product information visit our website at http://www.apextoolgroup.com PL30-2052EN Dotco Nomenclature
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 2
CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
TRANSPORT - RENUKOOT Printed Jan. 2018
TRANSPORT - RENUKOOT Printed Jan. 2018 HINDALCO Hindalco Catalogue Contents Page No. A. Hindalco - An Overview B. Specifications... 06... 08 1. Bus Windows... 12 2. Bus Structurals... 19 3. Moulding...
CONTINUED FROM PART- 2 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Kare Zindagi Instant Start
Kare Zindagi Instant Start KIND ATTENTION t In event of any particular model being phased out or out of stock, the Company reserves the right to provide another equivalent model of same capacity best
Solar Energy Corporation of India New Delhi-17
Solar Energy Corporation of India New Delhi-7 : SECI/Cont./SRT-IV-P/7/0/ Date: 6-07-0 Subject: tification of L bidders of different States in Part-A and for price matching by L, L,L.and so on..0 The Request
CONTINUED FROM PART- 3 INTRODUCTION
CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Parts Manual PL EN 05/19/ L4321 Router. For additional product information visit our website at
Parts Manual 10L4321 Router For additional product information visit our website at http://www.apextoolgroup.com Product Information The original language of this manual is English. Product Safety Information:
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
10LF and 12LF Series Right Angle Grinders
Product Manual 10LF and 12LF Series Right Angle Grinders XX L F 2 XX - XX Tool Series 10 = Aluminum Housing 12 = Ergo Housing Throttle Type L = Locking Lever Motor Size F = 0.4 hp Handle Style 2 = Right
CONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
N60 Rotary Vane Pneumatic Motor
Parts Manual PL70-1043EN 24-1312N60 Rotary Vane Pneumatic Motor For additional product information visit our website at http://www.apextoolgroup.com PL70-1043EN Cleco 24-1312N60 Rotary Vane Motor Model
Manual changeover switches & Automatic transfer switches
Manual changeover switches & Automatic transfer switches Manual ChangeoverSwitches 63A to 1600A Advantagesforyou: Doublebreakperpolefacilitalingsuitabilityforisolationasper IEC60947-3 Safeisolationat0positionformaintenance
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Export Oriented Enterprises (EOE) 1st Quarter Introduction This issue of Economic and Social Indicators (ESI) presents the results of the
Export Oriented Enterprises (EOE) 1st Quarter 2018 1. Introduction This issue of Economic and Social Indicators (ESI) presents the results of the Quarterly Survey of Employment among Export Oriented Enterprises
CONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Export Oriented Enterprises (EOE) 3 rd Quarter Introduction This issue of Economic and Social Indicators (ESI) presents the results of the
Export Oriented Enterprises (EOE) 3 rd Quarter 2017 1. Introduction This issue of Economic and Social Indicators (ESI) presents the results of the Quarterly Survey of Employment among Export Oriented Enterprises
10N10 Series Inline Grinder
Parts Manual 0N0 Series Inline Grinder For additional product information visit our website at http://www.apextoolgroup.com Nomenclature and Specifications Product Type 0 = Aluminum Housing Grinder Throttle
Export Oriented Enterprises (EOE) 2nd Quarter 2018
Export Oriented Enterprises (EOE) 2nd Quarter 2018 1. Introduction This issue of Economic and Social Indicators (ESI) presents the results of the Quarterly Survey of Employment among Export Oriented Enterprises
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 3 INTRODUCTION
CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
10N M6 Series Right Angle Grinder
Parts Manual PL30-2042EN 10N1200-36M6 Series Right Angle Grinder For additional product information visit our website at http://www.apextoolgroup.com PL30-2042EN Dotco Nomenclature and Specifications Product
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Parts Manual EN PL30-12R04 07/21/ R04 Series 0.1 HP Inline Pencil Grinder
Parts Manual PL30-12R04 12R04 Series 0.1 HP Inline Pencil Grinder For additional product information visit our website at http://www.apextoolgroup.com Dotco Nomenclature 12 R 04 XX - X X Series 12 = Ergo
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
HORIBA Jobin Yvon GmbH HORIBA Vietnam Company Limite ted Hea d Offi ce HORIBA ITALIA Srl Mil ano Office HORIBA Korea Ltd. Seoul Branch HORIBA Instruments Inc. Edison office HORIBA FRANCE SAS HORIBA India
CONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Airetool. Gas Line Cleaners Range: 3/4 (19.05mm) to 1-1/2 (38.10mm) Operating & Service Manual PL EN 10/01/2015
Operating & Service Manual PL9-6026EN 0/0/205 Airetool Gas Line Cleaners Range: 3/4 (9.05mm) to -/2 (38.0mm) For additional product information visit our website at http://www.apextoolgroup.com PL9-6026EN
PLASTIC WELDING. New! TRIAC AT. Intelligent and robust.
PLASTIC WELDING TRIAC AT New! Intelligent and robust. Hot air tool TRIAC AT The new TRIAC AT is an intelligent yet robust hot air tool for welding and shrinking plastic. It is designed for the needs of
Maximum retail price list. For SKF domestic industrial products Deep groove ball bearings and taper roller bearings
Maximum retail price list For SKF domestic industrial products Deep groove ball bearings and taper roller bearings Effective from 1 st May, 2017 Deep groove ball bearings 16007 282 16007/C3 282 16008 386
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
SIPRO TECH. A-502,Yasho Narayana Building, Near Panvel Railway Station, Old Panvel, NaviMumbai Ph.no: / ,
Sipro Tech is established in Jan 2008. COMPANY PROFILE The firm is mainly engaged in carrying out all type of Engineering Design works such as detail Engineering of Electrical Systems & Control Panels
Pioneer P750/49. The Premium 750 KW Wind Turbine. green. pioneer. go go with
Pioneer P750/49 The Premium 750 KW Wind Turbine green go go with pioneer Transforming the Power of Wind Corporate Profile Pioneer Wincon Private Limited (PWPL) is a member company of the Pioneer Asia Group
High Accuracy Wire Electrical Discharge Machines
Equipment and Construction Work for Machine Installation 1. Floor area and foundation work 4. Electrical work W32FB W53FB 2. Factory air-conditioning equipment Recommended optimal temperature 20 1 Heat
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. Journal of The Patent Office. This Journal is being published on weekly basis on every Friday
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 3 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
D6..M.. Butterfly Valves
D6..M.. Butterfly Valves Technical Databook Ver. Version 2 2.0 Belimo Asia Pacific D6..MH/MW Series Butterfly Valves Trade Selection by Belimo 2-way Butterfly Valves flanged DN50...500 For Open/Close or
CONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Non Return Valve Swing Check
Non Return Valve Swing Check Forbes Marshall is a leader in the area of process efficiency and energy conservation for the process industry. We have sixty years of experience building steam engineering
One machine multiple applications.
One machine multiple applications. image 1 image 2 image 3 image 4 Manufacturing of engineering plastics. Processing of PVC. Manufacturing of TPE. Manufacturing of master batches. Coperion worldwide. >
CONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Employees' Provident Fund Organisation, India Ministry of Labour & Employment, Government of India
Employees' Provident Fund Organisation, India Ministry of Labour & Employment, Government of India Date 20th December, 2018 NET PAYROLL DATA EPFO PROVISIONAL ESTIMATE OF NET PAYROLL IN AGE BUCKETS AS PER
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
Steam Valves with Rotary Actuators
Steam Valves with Rotary Actuators Technical Databook Version 3.1 Belimo Asia Pacific Steam Valve Product overview 2-way Steam Valves DN15...80 Equal-percentage characteristics for modulating control of
ACX 750. Hydraulic Crawler Crane 75 tons Capacity. High performance rough terrain and rugged crawler crane.
ACX 0 Hydraulic Crawler Crane tons Capacity. High performance rough terrain and rugged crawler crane. Robust and sturdy design Best in class lifting duties Hydraulically extendable tracks Easy transportation
The Present and the Future of the Stainless Steel Market in India. Ramesh R. Gopal General Manager Nickel Institute Executive Director I S S D A
The Present and the Future of the Stainless Steel Market in India Ramesh R. Gopal General Manager Nickel Institute Executive Director I S S D A This Picture Says it All! India s end-use break-up (2007-08)
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published