CONTINUED FROM PART 3
|
|
- Jesse Fleming
- 5 years ago
- Views:
Transcription
1 CONTINUED FROM PART 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in the Official Journal of The Patent Office. This Journal is being published on weekly basis on every Friday covering the various proceedings on Designs as required according to the provisions of under Rule 22, 25, 27 and 39 of the Design (Amendment) Rules, All the enquiries on this Official Journal and other information as required by the public should be addressed to the Controller General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that the content can be enriched. The Patent Office Journal 19/03/
2 REGISTRATION OF DESIGNS The following designs have been registered. They are now open for public inspection. In the following each entry the Date of Registration is shown. The Priority Number, Priority Date and Priority Country are also shown. Design Number Class )Dart Industries Inc., South Orange Blossom Trail, Orlando, Florida 32837, USA Date of Registration 29/07/2004 Grater-Cum-Slicer Design Number Class )Dart Industries Inc., South Orange Blossom Trail, Orlando, Florida 32837, USA Date of Registration 20/01/2006 Bowl Design Number Class )Patil Rail Infrastructure Pvt. Ltd. 205 and 206, IInd Floor, Amarchand Sharma Complex S.P. Road, Secunderabad, , Andhra Pradesh, India Date of Registration 18/04/2007 Concrete Plinth for Standard Guage Ballastless Track The Patent Office Journal 19/03/
3 Design Number Class )Motorola, Inc., 1303 East Algonquin Road, Schaumburg, Illinois 60196, Usa. Date of Registration 15/11/2007 User Interface Priority Priority Number Date Country 29/280,079 15/05/2007 U.S.A. Design Number Class )Sensormatic Electronics Corporation., 6600 Congress Avenue, Baca Raton Florida 33487, USA Date of Registration 20/02/2008 Electronic Article Surveillance Tag Priority Priority Number Date Country 29/291,254 20/08/2007 U.S.A. Design Number Class )Crompton Greaves Limited 6th Floor, CG House, Dr. Annie Besant Road, Worli, Mumbai , Maharashtra, India. Date of Registration 31/03/2008 Street Lighting Fixture The Patent Office Journal 19/03/
4 Design Number Class )Kohler Co., 444 Highland Drive, Kohler, Wisconsin, 53044, United States of America Date of Registration 22/04/2008 Bathing Tub Priority Priority Number Date Country 29/297,421 09/11/2007 U.S.A. Design Number Class )Jagruti Pradip Dave A-14, Tulip Bungalow, Drive-In-Road, Nr. Surdhara Circle, Ahmedabad , Gujarat, India Date of Registration 24/07/2008 Garment Design Number Class )Jagruti Pradip Dave A-14, Tulip Bungalow, Drive-In-Road, Nr. Surdhara Circle, Ahmedabad , Gujarat, India Date of Registration 24/07/2008 Garments The Patent Office Journal 19/03/
5 Design Number Class )Siemens Aktiengesellschaft Wittelsbacherplatz 2, D-80333, Munich, Germany Date of Registration 05/08/2008 Row Installation Device Design Number Class )M/s Suyash Industries 18, Atika Industrial Area, Dhebar Road South, Rajkot , Gujarat, India Date of Registration 25/08/2008 Design Number Class Handle 1)M/s Suyash Industries 18, Atika Industrial Area, Dhebar Road South, Rajkot , Gujarat, India Date of Registration 25/08/2008 Handle The Patent Office Journal 19/03/
6 Design Number Class )M/S. Jay Shakti Metal 4, Atika Industrial Area, Patel Chowk, Dhebar Road (South), Gujarat, India Date of Registration 25/08/2008 Handle Design Number Class )M/S. Jay Shakti Metal 4, Atika Industrial Area, Patel Chowk, Dhebar Road (South), Gujarat, India Date of Registration 25/08/2008 Handle Design Number Class )KG Plastochem (I) Pvt Ltd. B-14, DSIDC Complex, Jhilmil Industrial Area, Delhi , India Date of Registration 04/09/2008 Container The Patent Office Journal 19/03/
7 Design Number Class )BTICINO S. P. A. Via Messina, 38 I Milano, Italy Date of Registration 19/09/2008 Electric Equipment Priority Priority Number Date Country /03/2008 OHIM Design Number Class )PMS Enterprise 15/16, Samrat Industrial Area, B/H S. T. Workshop, Gondal Road, Rajkot , Gujarat, India Date of Registration 23/09/2008 Handle Design Number Class )Jaipur Rugs Co. Pvt. Ltd. G-250, Mansarvar Industrial Area, Jaipur , Rajasthan, India Date of Registration 10/09/2008 Carpet The Patent Office Journal 19/03/
8 Design Number Class )Jaipur Rugs Co. Pvt. Ltd. G-250, Mansarvar Industrial Area, Jaipur , Rajasthan, India Date of Registration 10/09/2008 Carpet Design Number Class )Jaipur Rugs Co. Pvt. Ltd. G-250, Mansarvar Industrial Area, Jaipur , Rajasthan, India Date of Registration 10/09/2008 Carpet Design Number Class )Hisamitsu Pharmaceutical Co., Inc. 408, Tashirodaikan-machi, Tosushi, Saga, , Japan Date of Registration 29/09/2008 Package (Packing Box) The Patent Office Journal 19/03/
9 Design Number Class )Hisamitsu Pharmaceutical Co., Inc. 408, Tashirodaikan-machi, Tosushi, Saga, , Japan Date of Registration 29/09/2008 Package (Packing Box) Design Number Class )Tata Tea Limited 1, Bishop Leftoy Road, Kolkata , West Bengal, India Date of Registration 06/10/2008 Bottle Design Number Class )Formway Furniture Limited 176, Gracefield Road, Petone, Wellington, New Zealand Date of Registration 08/10/2008 Chair The Patent Office Journal 19/03/
10 Design Number Class )Sony Ericsson Mobile Comunications AB Nya Vattentornet, SE , Lund, Sweden Date of Registration 13/10/2008 Mobile Phone Priority Priority Number Date Country /05/2008 OHIM Design Number Class )Loom Furniture (India) Pvt. Ltd., A-7/98 & 99, South Side of G. T. Road, Industrial Area, Ghaziabad , U. P., India Date of Registration 13/10/2008 Double Seater Sofa Design Number Class )Global Footwear & Leather Craft Industries No. 1 Rippon Street, Kolkata , West Bengal, India Date of Registration 14/10/2008 Sole for Footwear The Patent Office Journal 19/03/
11 Design Number Class )Global Footwear & Leather Craft Industries No. 1 Rippon Street, Kolkata , West Bengal, India Date of Registration 16/10/2008 Sole For Footwear Design Number Class )Panasonic Corporation 1006, Oaza Kadoma, Kadoma-shi, Osaka , Japan Date of Registration 20/10/2008 Light Emitting Diode Lamp Design Number Class )Bhupesh Khanna 15/14, East Patel Nagar, New Delhi , India Date of Registration 21/10/2008 Four Layers Polypropylene Pipe The Patent Office Journal 19/03/
12 Design Number Class )Cooper Corporation Pvt. Ltd., L-3, Addl. MIDC, Post Kodoli, Satara , Maharashtra, India Date of Registration 23/10/2008 Cylinder Block Design Number Class )Cooper Corporation Pvt. Ltd., L-3, Addl. MIDC, Post Kodoli, Satara , Maharashtra, India Date of Registration 23/10/2008 Chaincse Cover Design Number Class )Larsen & Tourbo Limited L & T House, Ballard Estate, Mumbai , Maharashtra, India Date of Registration 27/10/2008 Data Logger The Patent Office Journal 19/03/
13 Design Number Class )Crompton Greaves Limited 6th Floor, CG House, Dr. Annie Besant Road, Worli, Mumbai , Maharashtra, India. Date of Registration 29/10/2008 Bollard Design Number Class )Braun GmbH Frankfurter Strasse 145, Kronberg, DE Date of Registration 30/10/2008 Toothbrush Handle Design Number Class )PMS Interprise 15/16, Samrat Industrial Area, B/H S. T. Workshop, Gondal Road, Rajkot , Gujarat, India Date of Registration 10/11/2008 Handles The Patent Office Journal 19/03/
14 Design Number Class )Shree Harikrupa Die Castig K-1, 242/17, B/h, Mel-Tech, Nr. Turbo Bearing, Aji Vasahat GIDC, Pin , Rajkot, Gujarat, India Date of Registration 11/11/2008 Sofa Leg Design Number Class )Shree Harikrupa Die Casting K-1, 242/17, B/h, Mel-Tech, Nr., Turbo Bearing, Aji Vasahat GIDC, Pin , Rajkot, Gujarat, India Date of Registration 11/11/2008 Sofa Leg Design Number Class )We Eicher Goodearth Private Limited 12 Commercial Complex, Greater Kailash, Part-II, (Masjid Moth), New Delhi , India Date of Registration 12/11/2008 Tea-Cosy Cover The Patent Office Journal 19/03/
15 Design Number Class )Walambia Industries Gogate Wadi, Off. Aarey Road, Goregaon East, Mumbai , Maharashtra, India Date of Registration 14/11/2008 Container Design Number Class )Walambia Industries Gogate Wadi, Off. Aarey Road, Goregaon East, Mumbai , Maharashtra, India Date of Registration 14/11/2008 Lunch Box Design Number Class )Nilkamal Limited Survey No.-354/2 & 354/3, Near Rakholi Bridge, Silvassa, Khanvel Road, Village Vasona, Silvassa (D & N. H.) (U.T.), India Date of Registration 14/11/2008 Table The Patent Office Journal 19/03/
16 Design Number Class )Nilkamal Limited Survey No.-354/2 & 354/3, Near Rakholi Bridge, Silvassa, Khanvel Road, Village Vasona, Silvassa (D & N. H.) (U.T.), India Date of Registration 24/11/2008 Cabinet Design Number Class )Shindengen Electric Manufacturing Co., Ltd., 2-1, Ohtemachi 2-chome, Chiyoda-Ku, Tokyo, Japan Date of Registration 28/11/2008 Case for Electric Circuit Equipment Design Number Class )Charming Apparels (P) Ltd., , 1st Floor, Main Road, Chandni Chowk, Delhi , India Date of Registration 01/12/2008 Textile Fabric The Patent Office Journal 19/03/
17 Design Number Class )AL Qasmi Rahamat Majid Road, Linking Road, Ganesh Nagar, Charkop, Kandivali (West), Mumbai, India Date of Registration 10/12/2008 Earring Screw Design Number Class )Naresh Matai 405, Hiren Industrial Estate, Mongal Lane, Mahim (W), Mumbai , Maharashtra, India Date of Registration 18/12/2008 Tester Design Number Class )Asahi Electric Works, Ltd , Azamino-Minami, Aoba-ku, Yokohama-shi, kanagawa-ken, Japan Date of Registration 18/12/2008 Spacer for Overhead Transmission Line Conductor The Patent Office Journal 19/03/
18 Design Number Class )Nintendo Co., Ltd., 11-1, Hokotate-cho, Kamitoba, Minami-ku, Kyoto-Shi, Kyoto, Japan Date of Registration 30/12/2008 Controller Cover Design Number Class )Bothara Agro Equipments Pvt. Ltd., B-16, M.I.D.C., Ahmednagar , Maharashtra, India. Date of Registration 09/01/2009 Pump Pipe Design Number Class )John Clement Preston., 196, Silverwater Road, Silverwater, NSW 2128, Australia. Date of Registration 09/01/2009 Fencing Priority Priority Number Date Country 13187/ /07/2008 Australia The Patent Office Journal 19/03/
19 Design Number Class )Bothara Ageo Equipments Pvt. Ltd., B-16, M.I.D.C., Ahmednagar , Maharashtra, India. Date of Registration 16/01/2009 Submersible Pump Pipe Design Number Class )S. Satish 5/5A, Valluvar Salai, Ranapuran, Chennai, , India Date of Registration 22/01/2009 Bag Design Number Class )Earth Friendly Ltd. Henville Building, Prince Charles Street, Charlestown Date of Registration 06/03/2009 Decorative Article (Starlight) The Patent Office Journal 19/03/
20 Design Number Class )PNL Metalware Pvt. Ltd. Plot No. G-1843, Kishan Gate Road, G.I.D.C. Metoda (Lodhika), Taluka, Lodhika, Dist. Rajkot , Gujarat, India. Date of Registration 16/03/2009 Door Handle Design Number Class )PNL Metalware Pvt. Ltd. Plot No. G-1843, Kishan Gate Road, G.I.D.C. Metoda (Lodhika), Taluka, Lodhika, Dist. Rajkot , Gujarat, India. Date of Registration 16/03/2009 Door Handle Design Number Class )PNL Metalware Pvt. Ltd. Plot No. G-1843, Kishan Gate Road, G.I.D.C. Metoda (Lodhika), Taluka, Lodhika, Dist. Rajkot , Gujarat, India. Date of Registration 16/03/2009 Door Handle The Patent Office Journal 19/03/
21 Design Number Class )Hansgrohe AG, Auestr. 5-9, D Schiltach, Germany. Date of Registration 17/03/2009 Wash Basin Priority Priority Number Date Country /09/2008 OHIM Design Number Class )Hansgrohe AG, Auestr. 5-9, D Schiltach, Germany. Date of Registration 17/03/2009 Wash Basin Priority Priority Number Date Country /09/2008 OHIM Design Number Class )THERMO FISHER SCIENTIFIC OY., RATASITE 2, VANTAA, FINLAND. Date of Registration 15/04/2009 Priority Priority Number Date Country Cuvette /11/2008 EUROPEAN UNION The Patent Office Journal 19/03/
22 Design Number Class )Zebra Co. Ltd. 2-9, Higashi-Gokencho, Shinjuku-Ku, Tokyo, Japan Date of Registration 28/04/2009 Ballpoint Pen Priority Priority Number Date Country /11/2008 Japan Design Number Class )Gold Medal Electrical Pvt. Ltd. 22/23 Shubh Building Sagar Manthan Industrial Complex, Bhoidapada, Vasai (E), Thane Date of Registration 27/05/2009 Switch Knob Design Number Class )Sony Ericsson Mobile Communications AB SE , Lund, Sweden Date of Registration 03/07/2009 Mobile Phone Priority Priority Number Date Country /01/2009 OHIM The Patent Office Journal 19/03/
CONTINUED FROM PART 2
CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in
More informationCONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART-1
CONTINUED FROM PART-1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 2
CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 3 INTRODUCTION
CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 2
CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationDC MOTORS. Crompton Greaves EVERYDAY SOLUTIONS
Crompton Greaves EVERYDAY SOLUTIONS DC MOTORS LT MOTORS DIVISION A - 6/2, M.I.D.C., AHMEDNAGAR - 414111. MAHARASHTRA. TEL : +91 (0241) 2776 151-154, 2776146, 2776187. FAX : +91 (0241) 2777508 INTRODUCTION
More informationCONTINUED FROM PART 3
CONTINUED FROM PART 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationKare Zindagi Instant Start
Kare Zindagi Instant Start KIND ATTENTION t In event of any particular model being phased out or out of stock, the Company reserves the right to provide another equivalent model of same capacity best
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 2 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationNews Letter Volume 1
News Letter 2017 Volume 1 30 Ÿ CONSISTENT QUALITY Ÿ SUPERIOR TECHNOLOGY Ÿ ENERGY EFFICIENT PRODUCTS Ÿ CUSTOMER SATISFACTION PRODUCT RANGE Ÿ FAN & MOTOR RUN CAPACITORS Ÿ AIR CONDITIONING CAPACITOR Ÿ SUBMERSIBLE
More informationHT, LT U.G. cables & PVC insulated Al wire
HT, LT U.G. cables & PVC insulated Al wire Sl.No Name of the firm s particulars Valid upto 1 M/s. Gloster s Ltd., Kallakal(Vi), Toopran(MN), Medak district, Andra Pradesh ( Ph No: 91-80-2372 2274,2837
More informationTable 6.15: Horse power-wise models of tractors and power tillers available in India (as on March 2016)
Table 6.15: Horse power-wise models of tractors and power tillers available in India (as on March 2016) S.No. Tractor company / model 1.0 New Holland Tractors, Gautam Budh Nagar, Uttar Pradesh 1.1 Tractor
More informationSTAMPINGS QUALITY AT AN AFFORDABLE COST
QUALITY AT AN AFFORDABLE COST INTRODUCTION Crompton Greaves Ltd., the pioneer and leader in the Electrical Industry for last seven decades, manufactures its own requirement of Stampings & Laminations for
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationFine and Ultra-Fine Enamelled Copper Wire
Fine and UltraFine Enamelled Copper Wire Winding a promising future RR Shramik is a part of RR Global which is one of the leading conglomerates in the electrical and copper industry. RR Shramik is India's
More informationMaximum retail price list. For SIBCO range of bearing housings and accessories Bearing housings, sleeves, locknuts, lock washers and locating rings
Maximum retail price list For SIBCO range of bearing housings and accessories Bearing housings, sleeves, locknuts, lock washers and locating rings Effective from 1 st April, 2017 Engineered for optimized
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationSIPRO TECH. A-502,Yasho Narayana Building, Near Panvel Railway Station, Old Panvel, NaviMumbai Ph.no: / ,
Sipro Tech is established in Jan 2008. COMPANY PROFILE The firm is mainly engaged in carrying out all type of Engineering Design works such as detail Engineering of Electrical Systems & Control Panels
More informationOUTDOOR OFF LOAD DISCONNECTORS HCB/HDB Range
OUTDOOR OFF LOAD DISCONNECTORS HCB/HDB Range SWITCHGEAR COMPLEX SWITCHGEAR COMPLEX Crompton Greaves Ltd. the name to reckon in Electrical Industry, brings a product with its leading edge technology to
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART-1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect
CONTINUED FROM PART-1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationLIST OF MOUs SIGNED BY GOVERNMENT OF TAMIL NADU
LIST OF MOUs SIGNED BY GOVERNMENT OF TAMIL NADU S.No Date Company Place Manufacturing Products 1. 07.06.2006 M/s. Motorola Sriperumputhur (U.S.A) SIPCOT Communication Equipments, Cell Phones & Accessories
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationSPnorm & SPbloc Self Priming Centrifugal Pumps
SPnorm & SPbloc Self Priming Centrifugal Pumps SPbloc SPbloc SPnorm SPnorm & SPbloc Self Priming Centrifugal Pumps SPnorm & SPbloc - Self Priming Centrifugal Pumps Design SPnorm: Horizontal self priming
More informationCROMPTON GREAVES LTD. M5,Pumps Division C-19, MIDC, Ahmednagar, Maharashtra
CROMPTON GREAVES LTD. M5,Pumps Division C-19, MIDC, Ahmednagar, Maharashtra 414111 COMPANY PROFILE Introduction: Crompton Greaves (CG) is part of the US$ 4 bn Avantha Group, a conglomerate with an impressive
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More information14.Storage Infrastructure
Infrastructure 393 394 14. STORAGE 14.1 There is no specific data source for this item, which compiles data for all types of storages in one place. Data has been individually obtained from Central Warehousing
More informationTechnology Innovation Leadership TRAINING CALENDAR
Technology Innovation Leadership TRAINING CALENDAR 2017-18 Courses Offered 2017-2018 Sr. No. Category Program Title Objective / Contents Period Participants Location Faculty 1 Common Module for all products
More informationSolar PV systems Roof Tops, Ground Mounted & Floating Platform, Grid Tied & Standalone. Solar PV Rooftop 140 kwp at BCP Mumbai
Solar PV systems Roof Tops, Ground Mounted & Floating Platform, Grid Tied & Standalone Solar PV Rooftop 140 kwp at BCP Mumbai 22.08.2017 AUTONIC at a glance Autonic Energy Systems Pvt. Ltd. was incorporated
More informationPrice List No.: LTD/002 Effective from Supercedes Price List No.: LTD/001 Dated (Added new Series, Options & Accessories)
1 CG DRIVE-SK Simple to use Compact to fit Power to perform S.No Sensorless Vector Drive Suitable for operation 200/240VAC+/-10% Enclosure IP20,Vertical Mounted as standard Model No. (kw) (HP) Phase Voltage
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationOne machine multiple applications.
One machine multiple applications. image 1 image 2 image 3 image 4 Manufacturing of engineering plastics. Processing of PVC. Manufacturing of TPE. Manufacturing of master batches. Coperion worldwide. >
More informationH2R and H2L Cable Reel
c Installation Service and Parts Manual H2R and H2L Cable Reel Serial Numbers 678971 through 678972 Part Number 679932-R1 cascade corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207
More informationInstallation Instructions
c Installation Instructions Clamp Open Guard Switch Activated Retrofit Kit 6048125 This manual provides installation instructions for Cascade Clamp Open Guard Retrofit Kit. The kit converts an existing
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationPioneer P750/49. The Premium 750 KW Wind Turbine. green. pioneer. go go with
Pioneer P750/49 The Premium 750 KW Wind Turbine green go go with pioneer Transforming the Power of Wind Corporate Profile Pioneer Wincon Private Limited (PWPL) is a member company of the Pioneer Asia Group
More informationCONTINUED FROM PART- 2 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO
P-EX01-A Solenoid Valve (with M Connector) Conforming to ISO 1507-1, Large capacity EVS1-01 (Size: 01) EVS1-0 (Size: 0) Light weight Size 01 (-position): 0.6kg Size 0 (-position): 0.18kg Flow rate 1000L/min
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationTRANSPORT - RENUKOOT Printed Jan. 2018
TRANSPORT - RENUKOOT Printed Jan. 2018 HINDALCO Hindalco Catalogue Contents Page No. A. Hindalco - An Overview B. Specifications... 06... 08 1. Bus Windows... 12 2. Bus Structurals... 19 3. Moulding...
More informationCONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationList of Registered Used Oil/Waste Oil Recyclers Granted by GPCB updated till 30/06/2015 Waste
Ministry of Environment & Forest & Climate Change (MoEFCC), New Delhi has published a Gazattee notification vide no S.O 1996(E) dated 13/08/2010 as the fourth amendment in the hazardous waste (M,H&TM)
More informationSiddhi Vinayak. Engineers
Siddhi Vinayak Engineers nd Office: Shop No. 9, Plot No. 146/2, II Phase, GIDC, Vapi -396195 Contact : Mr. Pratik Patel Mob. : +91 99984 72806 E-mail: siddhivinayakengineer@yahoo.com NBC Bearing National
More informationNandan Petrochem Limited
+91-8048736727 Nandan Petrochem Limited https://www.indiamart.com/nandanpetrochem/ Nandan Petrochem Limited is an ISO 9001:2008 (QMS) and ISO 14001:2004 (EMS) certified organization and has access to the
More information[To be published in the Gazette of India, Extraordinary, Part-II, Section 3, Sub-section (ii)]
[To be published in the Gazette of India, Extraordinary, Part-II, Section 3, Sub-section (ii)] Government of India Ministry of Finance Department of Revenue Notification No. 53/2016- Customs (N.T.), dated
More informationInstallation Instructions
c Installation Instructions Light Kits for Three-Position Pressure Relief Valve 0 This manual provides installation instructions for, or Kits used with -Position Pressure Relief Valve 0. The switch box
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationBTS Fair of Shoes, Leather & Leather Goods in Poznan, Poland- August 29th to 31st A Report by Dr. Debasis De, Asst.
BTS Fair of Shoes, Leather & Leather Goods in Poznan, Poland- August 29th to 31st 2016. A Report by Dr. Debasis De, Asst. Director, CLE-ER Poland (Republic of Poland) is one of the countries in Central
More informationLiebert GXT-MT 1-3kVA UPS. Power Protection for Business Critical Continuity
Liebert GXT-MT 1-3kVA UPS Power Protection for Business Critical Continuity Trouble is Coming Down The Line And You Must Be Prepared Every operation in your business depends upon the instant, around-the
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationNATIONAL HOUSING BANK. Press Release
NATIONAL HOUSING BANK Press Release NHB RESIDEX RESIDENTIAL HOUSING PRICE INDEX Update for the Quarter July-September, 2017 (Q2 2017) NHB RESIDEX, India s first official housing price index (HPI), was
More informationCONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationRUDRA ENGINEERS. Product Catalogue. Specialist in manufacturers and suppliers of all type of Electrical Control Equipments for EOT Cranes and Hoists
RUDRA ENGINEERS Product Catalogue Specialist in manufacturers and suppliers of all type of Electrical Control Equipments for EOT Cranes and Hoists One Stop Destination for all type of Electricals for Material
More informationCONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationInstallation Instructions
c Installation Instructions Clamp Open Guard Kits 6008230-12V, 6018016-24V, 6018017-36V, 6018012-48V This manual provides installation instructions for Cascade Clamp Open Guard. The kit prevents the accidental
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationLabor Productivity, Compensation Costs, and U.S. International Competitiveness
Cornell University ILR School DigitalCommons@ILR Federal Publications Key Workplace Documents June 1993 Labor Productivity, Compensation Costs, and U.S. International Competitiveness U.S. Bureau of Labor
More informationMaximum retail price list, For SKF domestic industrial products
Maximum retail price list, 2013 For SKF domestic industrial products Effective from 1 st November, 2013 SKF Ahmedabad Factory: World class industrial bearings manufactured locally The legacy of Knowledge
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationMaximum retail price list. For SKF domestic industrial products Deep groove ball bearings and taper roller bearings
Maximum retail price list For SKF domestic industrial products Deep groove ball bearings and taper roller bearings Effective from 1 st May, 2017 Deep groove ball bearings 16007 282 16007/C3 282 16008 386
More informationParts Manual. cascade
c Parts Manual Model Catalog Number Fork Positioner 55K-FPS-A011 R2 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com Fork Positioner Assembly Sticker
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationexports of goods annual change (%)
12.0 Austria s foreign trade 2015 by world region imports of goods 2015 exports of goods 2015 region 1 1 share (%) share (%) Europe 106,984 80.4 104,032 79.1 EU 93,686 70.4 90,841 69.1 EFTA 8,020 6.0 8,098
More informationexports of goods annual change (%)
12.0 Austria s foreign trade 2016 by world region imports of goods 2016 exports of goods 2016 region 1 1 share (%) share (%) Europe 110,067 81.2 104,271 79.5 EU 96,801 71.4 91,112 69.4 EFTA 7,718 5.7 8,132
More informationPower IT MV Live Tank Vacuum Circuit Breaker. Model OVB-SDB
Power IT MV Live Tank Vacuum Circuit Breaker Model OVB-SDB ABB - a global leader in power and automation technologies ABB (www.abb.com) is a global leader in power and automation technologies that enable
More informationGanesh Engineering Company
+91-8048762226 Ganesh Engineering Company https://www.eotcraneindia.in/ We are a well-known manufacturer and exporter of a range of material handling equipment mainly EOT Crane, Goliath Cranes, Gantry
More informationCONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More information