CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

Size: px
Start display at page:

Download "CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,"

Transcription

1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in the Official Journal of The Patent Office. This Journal is being published on weekly basis on every Friday covering the various proceedings on Designs as required according to the provisions of under Rule 22, 25, 27 and 39 of the Design (Amendment) Rules, All the enquiries on this Official Journal and other information as required by the public should be addressed to the Controller General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that the content can be enriched. The Patent Office Journal 28/10/

2 COPYRIGHT PUBLICATION SL NO CASE NUMBERS RENEWED ON The Patent Office Journal 28/10/

3 CANCELLATION PROCEEDINGS under Section 19 of the Designs Act, 2000 (1) The Ld. Asstt. Controller of Patents & Designs passed an order on 18/10/2011 to cancel the registration of registered Design No dated 19/7/2004 under Class titled as Carpet in the name of S.N. Kapoor Exports, an Indian partnership firm of Khwasji ka bagh, Amer Road, Jaipur , Rajasthan (India) whose partners are Surinder Nath Kapoor and Vikram Kapoor, both are Indian of above address. (2) The Ld. Asstt. Controller of Patents & Designs passed an order on 18/10/2011 to cancel the registration of registered Design No dated 01/10/2004 under Class titled as Carpet in the name of S.N. Kapoor Exports, an Indian partnership firm of Khwasji ka bagh, Amer Road, Jaipur , Rajasthan (India) whose partners are Surinder Nath Kapoor and Vikram Kapoor, both are Indian of above address. The Patent Office Journal 28/10/

4 REGISTRATION OF DESIGNS The following designs have been registered. They are now open for public inspection. In the following each entry the Date of Registration is shown. The Number, Date and Country are also shown Design Number Class )X6d Ltd., 199 Arch Makarios III Ave 3030 Limassol Cyprus Date of Registration 10/09/2010 3d Glasses Number Date Country 29/349, /03/2010 U.S.A. Design Number Class )Mahotsav Creation Pvt. Ltd., "Mahotsav House" No.6, Rathi Palace, Ring Road, Surat , Gujarat, India Date of Registration 03/02/2011 Saree and Blouse Set NA Design Number Class )Parry Murray & Co., Ltd., 3rd Floor, Simpson House, 6 Cherry Orchard Road, Croydon, CRO 6BA, United Kingdom Date of Registration 18/05/2011 NA Textile Fabric The Patent Office Journal 28/10/

5 Design Number Class )Moll Funktionsmobel GmbH Rechbergstrasse 7, D Gruibingen, Germany Date of Registration 24/12/2010 Chair Number Date Country (DM/073813) 24/06/2010 WIPO Design Number Class )Seiko Epson Corporation 4-1, Nishi-Shinjuku 2-chome, Shinjuku-ku, Tokyo, , Japan Date of Registration 15/03/2011 Container Cap With Stopper Number Date Country /09/2010 OHIM Design Number Class )Saverglass.3 rue de la Gare, Feuquieres, France Date of Registration 29/04/2011 Bottle Number Date Country /11/2011 OHIM The Patent Office Journal 28/10/

6 Design Number Class )Lutron Electronics Company, Inc., 7200 Suter Road Coopersburg, Pennsylvania United States Date of Registration 25/02/2011 Dynamic Keypad For Controlling Electrical Loads Number Date Country 29/375, /09/2010 U.S.A. Design Number Class )Lg Electronics Inc., 20 Yeouido-Dong, Yeongdeungpo-Gu Seoul Republic of Korea Date of Registration 06/06/2011 Air Conditioner Number Date Country /12/2010 Republic of Korea Design Number Class )Millipore Corporation 290 Concord Road, Billerica, MA 01821, USA Date of Registration 20/12/2010 Multilayer Cell Culture Flask Number Date Country 29/364, /06/2010 U.S.A. The Patent Office Journal 28/10/

7 Design Number Class )Novartis AG., Lichtstrasse 35, 4056 Basel, SWITZERLAND Date of Registration 11/03/2011 Inhaler Body Number Date Country /09/2010 OHIM Design Number Class )M/S Abhinav Exports F-18, Sector-8, Noida (U.P.) India. Date of Registration 18/01/2011 Paper Star NA Design Number Class )Utsav Home Linen CS-91/586, Next to BOB, Badli Village, Delhi , India Date of Registration 31/01/2011 Bed Sheet & Pillow Cover Set NA The Patent Office Journal 28/10/

8 Design Number Class )Utsav Home Linen CS-91/586, Next to BOB, Badli Village, Delhi , India Date of Registration 31/01/2011 Bed Sheet Pillow Cover & Cushion Cover Set NA Design Number Class )Hindustan Unilever Limited Hindustan Lever House Backbay Reclamation Mumbai Maharashtra Date of Registration 19/04/2011 Toothbrush Number Date Country /10/2010 OHIM Design Number Class )Columbia Sportswear North America, Inc., NW Science Park Drive, Portland, Oregon 97229, USA Date of Registration 04/11/2010 Garment Number Date Country 29/361, /05/2010 U.S.A. The Patent Office Journal 28/10/

9 Design Number Class )Elecom Co. Ltd. 1-1 Fushimi-Machi 4-Chome Chuoku Osaka, Japan Date of Registration 30/03/2011 Number Date Country /10/2010 Japan Design Number Class )Ktm-Sportmotorcycle Ag., Stallhofner Str. 3, 5230 Mattighofen, Austria Date of Registration 08/12/2010 Motorcycle Bag Number Date Country MU 380/ /06/2010 Austria Design Number Class )The Procter & Gamble Company One Procter & Gamble Plaza, Cincinnati, Ohio , United States of America Date of Registration 23/03/2011 Packaging Container Number Date Country 29/375, /09/2010 U.S.A. The Patent Office Journal 28/10/

10 Design Number Class )Third Generation Kitchens Private Limited A-301, Mayank Mansion CGHS, Plot No.21, Sector-6, Dwarka, New Delhi , India Date of Registration 25/03/2011 NA Gass Oven Design Number Class )National Plasto Product Private Limited 19, Sukeas Lane 1st Floor Kolkata West Bengal India Date of Registration 15/06/2011 Chair NA Design Number Class )Ravissant Pvt. Ltd., 50-51, Commercial Complex, New Friends Colony, New Delhi Date of Registration 06/09/2010 NA Dish With Stand The Patent Office Journal 28/10/

11 Design Number Class )Moll Funktionsmobel GmbH Rechbergstrasse 7, D Gruibingen, Germany Date of Registration 24/12/2010 Chair Number Date Country (DM/073813) 24/06/2010 WIPO Design Number Class )Reckitt Benckiser Inc., Morris Corporate Center Iv, 399 Interpace Parkway, Parsippany, New Jersey 07054, Usa. Date of Registration 31/12/2010 Bottle With Cap Number Date Country /07/2010 OHIM Design Number Class )The Gillette Company IP/Legal Patent Department-3E, One Gillette Park, Boston, 02127, United States of America Date of Registration 14/03/2011 Trimming Device Number Date Country 29/369, /09/2010 U.S.A. The Patent Office Journal 28/10/

12 Design Number Class )M/s. Eureka Forbes Limited, B1/B2, 701, Marathon Innova, off Ganpatrao Kadam Marg, Lower Parel, Mumbai , India Date of Registration 26/04/2011 Bottle NA Design Number Class )The Procter & Gamble Company One Procter & Gamble Plaza, Cincinnati, Ohio , United States of America Date of Registration 11/03/2011 Bottle Number Date Country 29/369, /09/2010 U.S.A. Design Number Class )Honda Motor Co., Ltd., 1-1, Minami-Aoyama 2-chome, Minato-ku, Tokyo, Japan Date of Registration 09/05/2011 Grill For Automobile Number Date Country /11/2010 Japan The Patent Office Journal 28/10/

13 Design Number Class )Utsav Home Linen CS-91/586, Next to BOB, Badli Village, Delhi , India Date of Registration 31/01/2011 Bed Sheet & Pillow Cover Set NA Design Number Class )Vishwakarma Engineering Group Jammu Patti, Pakka Darwaza, Dhapali, Distt. Bathinda, India Date of Registration 28/03/2011 Fan Box For Electrical Fitting NA Design Number Class )SATA GmbH & Co. KG Domertalstrasse 20, Kornwestheim, Deutschland, Germany Date of Registration 11/10/2010 Manometer Number Date Country /04/2010 Germany The Patent Office Journal 28/10/

14 Design Number Class )Willem Neeleman Rembrandtlaan 81, 2661 SK Bergschenhoek Date of Registration 14/12/2010 Cable Socket. Number Date Country /06/2010 OHIM Design Number Class )X6d Ltd., 199 Arch Makarios III Ave 3030 Limassol Cyprus Date of Registration 10/09/2010 3d Glasses Number Date Country 29/349, /03/2010 U.S.A. Design Number Class )3m Innovative Properties Company., 3M Center, Saint Paul, Minnesota , USA., Date of Registration 04/02/2011 Adhesive Dispenser Number Date Country 29/367, /08/2010 U.S.A. The Patent Office Journal 28/10/

15 Design Number Class )Parry Murray & Co., Ltd., 3rd Floor, Simpson House, 6 Cherry Orchard Road, Croydon, CRO 6BA, United Kingdom Date of Registration 18/05/2011 Textile Fabric NA Design Number Class )Reckitt Benckiser Inc., Morris Corporate Center Iv, 399 Interpace Parkway, Parsippany, New Jersey 07054, Usa. Date of Registration 31/12/2010 Bottle With Cap Number Date Country /07/2010 OHIM Design Number Class )M/s Indian Products., 149/7, Street No.-2, Industrial Area-C, Gaispura. Ludhiana, Punjab, India Date of Registration 18/03/2011 NA Cycle Seat The Patent Office Journal 28/10/

16 Design Number Class )Lutron Electronics Company, Inc., 7200 Suter Road Coopersburg, Pennsylvania , United States Date of Registration 18/03/2011 Wireless Sensor Number Date Country 29/375, /09/2010 U.S.A. Design Number Class )M/s. Eureka Forbes Limited, B1/B2, 701, Marathon Innova, off Ganpatrao Kadam Marg, Lower Parel, Mumbai , India. Date of Registration 26/04/2011 Bottle NA Design Number Class )Flair Writing Instruments 63 B/c, Govt. Industrial Estate, Charkop, Kandivali (W) Mumbai (Maharashtra) India Date of Registration 29/04/2011 NA Pen The Patent Office Journal 28/10/

17 Design Number Class )Herbert Waldmann GmbH & Co. KG Peter-Henlein-Strasse, 5, Villingen Schwenningen, Germany Date of Registration 24/02/2011 Light Therapy Instrument Number Date Country /10/2010 Germany Design Number Class )Chintan Pankaj Kothari 1A, Ankur Apartment, 51 Juhu Lane, Andheri (West), Mumbai , Maharashtra, India Date of Registration 04/03/2011 Telephone Jacks NA Design Number Class )The Procter & Gamble Company One Procter & Gamble Plaza, Cincinnati, Ohio , United States of America Date of Registration 11/03/2011 Bottle Number Date Country 29/369, /09/2010 U.S.A. The Patent Office Journal 28/10/

18 Design Number Class )Toyo Denso Kabushiki Kaisha 10-4, Shinbashi 2-Chome, Minato-Ku, Tokyo Japan Date of Registration 27/01/2011 Ignition Coil For Internal Combustion Engine Number Date Country /07/2010 Japan Design Number Class )Utsav Home Linen CS-91/586, Next to BOB, Badli Village, Delhi , India. Date of Registration 31/01/2011 Bed Sheet & Pillow Cover Set NA Design Number Class )Lemnis Lighting Patent Holding B.V Flevolaan KC Naarden Date of Registration 15/04/2011 NA Light The Patent Office Journal 28/10/

19 Design Number Class )Colgate Palmolive Company Delaware Corporation, 300 Park Avenue New York USA Date of Registration 06/04/2011 Cap For A Container Number Date Country 29/378,219 01/11/2010 U.S.A. Design Number Class )Kuka Engineering Works Morinda Road, VPO-Chunni Khurd, Tehsil Bassi Pathana, Dist. Fatehgarh Sahib, Punjab, India Date of Registration 28/03/2011 Generator Set With Silencer NA Design Number Class )Dorma India Private Limited 14, Pattulous Road, Chennai , Tamil Nadu, India Date of Registration 22/03/2011 Metal Fitting - Offset Handrail Bracket NA The Patent Office Journal 28/10/

20 Design Number Class )Crompton Greaves Limited., Avantha House, 6th Floor, Dr. Annie Besant Road, Worli, Mumbai , Maharashtra, India Date of Registration 28/03/2011 Pump NA Design Number Class )BCS India Private Limited Vill. Manngarh, Kohara Machiwara Road, P.O. Kohara (Punjab) (India) Date of Registration 21/06/2011 Power Operated Weeder NA Design Number Class )Urmila Moulders 144/145, J.N. Mukherjee Road, Ghusuri, Howrah , West Bengal, India Date of Registration 18/05/2011 Chair NA The Patent Office Journal 28/10/

21 Design Number Class )Dorma India Private Limited 14, Pattulous Road, Chennai , Tamil Nadu, India Date of Registration 22/03/2011 Metal Fitting - End Cap NA Design Number Class )Nissan Jidosha Kabushiki Kaisha Manufacturers and Merchants of No. 2 Takaracho, Kanagawa-ku, Yokohama-shi, Kanagawa, japan Date of Registration 27/04/2011 Radiator Grill For Automobile Number Date Country /11/2010 Japan Design Number Class )Agni Jewels Pvt. Ltd., A-10, Nandbuvan Industrial Estate, Mahakali Caves Road, Andheri (East), Mumbai , Maharashtra INDIA Date of Registration 28/04/2011 Ear Ring NA The Patent Office Journal 28/10/

22 Design Number Class )Flair Writing Instruments 63 B/c, Govt. Industrial Estate, Charkop, Kandivali (W) Mumbai (Maharashtra) India Date of Registration NA 29/04/2011 Pen Design Number Class )Kaulin MFG. Co. Limited 11F No.128 Sec.3, Min-Shen E. Rd Taipei Taiwan (R.O.C.) Date of Registration 02/05/2011 Sewing Machine NA Design Number Class )Boregowda Srinivas Murthy 5th Cross Road, Kempegowda Nagar, Magadi Road Viswaneedam P.O Bangalore , Karnataka India. Date of Registration 20/12/2010 Base For Mobile Stand NA The Patent Office Journal 28/10/

23 Design Number Class )Yash Agarwal 9, Laxmi Complex, M.I. Road, Jaipur (Raj) Date of Registration 03/03/2011 Necklace and Earrings (Set) NA Design Number Class )Liberty Shoes Limited Liberty Puram, 13, Milestone, GT karnal Road, Kutail, DT-Karnal , Haryana, India Date of Registration 03/03/2011 Sole For Footwear NA Design Number Class )The Procter & Gamble Company One Procter & Gamble Plaza, Cincinnati, Ohio , United States of America Date of Registration 11/03/2011 Container Number Date Country 29/369, /09/2010 U.S.A. The Patent Office Journal 28/10/

24 Design Number Class )Reckitt Benckiser Llc., Morris Corporate Centre IV, 399 Interpace Parkway, Parsippany, New Jersey 07054, USA Date of Registration 21/01/2011 Dispenser for An Adhesive Composition Number Date Country /07/2010 OHIM Design Number Class )Utsav Home Linen CS-91/586, Next to BOB, Badli Village, Delhi , India. Date of Registration 31/01/2011 Bed Sheet & Pillow Cover Set NA Design Number Class )Zobele Espana, S.A., Spain, Argenters, 8-Edif. 3-Parc Technologic del Valles, Cerdanyola Del Valles, (Barcelona), Spain Date of Registration 09/11/2010 Air Freshener Number Date Country /05/2010 OHIM The Patent Office Journal 28/10/

25 Design Number Class )Wipro Limited Doddakannelli Sarjapur Road Bangalore karnataka India Date of Registration 06/04/2011 Chair With Desklet NA Design Number Class )Toyota Jidosha Kabushiki Kaisha., 1, Toyota-Cho, Toyota-Shi, Aichi-Ken, , Japan Date of Registration 03/02/2011 Automobile Number Date Country /08/2010 Republic of Korea Design Number Class )Manitowoc Foodservice Companies, LLC., th Street, Manitowoc, Wisconsin 54220, United States of America., Date of Registration 04/02/2011 Ice Machine Controller. Number Date Country 29/367, /08/2010 U.S.A. The Patent Office Journal 28/10/

26 Design Number Class )Arumuga Holding Private Limited No. 1, Sundaram Brother Layout, Opp. All India Radio, Trichy Road, Coimbatore , India Date of Registration 03/01/2011 Bottle NA Design Number Class )Nissan Jidosha Kabushiki Kaisha Manufacturers and Merchants of No. 2 Takaracho, Kanagawa-ku, Yokohama-shi, Kanagawa, japan Date of Registration 27/04/2011 Automobile Number Date Country /09/2010 Japan Design Number Class )Agni Jewels Pvt. Ltd., A-10, Nandbuvan Industrial Estate, Mahakali Caves Road, Andheri (East), Mumbai , Maharashtra INDIA Date of Registration 28/04/2011 Ear Ring NA The Patent Office Journal 28/10/

27 Design Number Class )V2 Corp WZ-8/1, Industrial Area, Kirti Nagar, New Delhi , India Date of Registration 21/10/2010 Cap For Bottle NA Design Number Class )Pathogen Detection Systems, Inc., Suite 4697, Biosciences Complex 116 Barrie Street, Kingston, ontario K7L 3N6, Canada Date of Registration 20/12/2010 Container Lid Number Date Country 29/364, /06/2010 U.S.A. Design Number Class )Yash Agarwal 9, Laxmi Complex, M.I. Road, Jaipur (Raj) Date of Registration 03/03/2011 Jewellery (Head Ornament) NA The Patent Office Journal 28/10/

28 Design Number Class )Raumplus GmbH & Co. KG, Dortmunder Strasse 35, Bremen, Germany Date of Registration 24/09/2010 Hinges Number Date Country DM/ /03/2010 WIPO Design Number Class )Utsav Home Linen CS-91/586, Next to BOB, Badli Village, Delhi , India. Date of Registration 31/01/2011 NA Bed Sheet & Pillow Cover Set Design Number Class )B. Braun Melsungen Ag., Carl-Braun-Strasse 1, Melsungen, Federal Republic of Germany Date of Registration 10/11/2010 Clinical Application System for The Administration of Drugs and Feeds Number Date Country /05/2010 OHIM The Patent Office Journal 28/10/

29 Design Number Class )GE Sensing & Inspection Technologies GmbH Robert-Bosch-Str Hurth Germany Date of Registration 19/10/2010 Measuring Apparatus Number Date Country EU /10/2010 EUROPEAN UNION Design Number Class )Huizhou Light Engine Ltd., No. 7 Building, No.21 Jiang bei Yun Shan East Road, Huizhou City, Guangdong, China Date of Registration 31/03/2011 Light Bulb Number Date Country 29/377, /10/2010 U.S.A. Design Number Class )The Procter & Gamble Company One Procter & Gamble Plaza, Cincinnati, Ohio , United States of America Date of Registration 23/03/2011 Packaging Container Number Date Country 29/375, /09/2010 U.S.A. The Patent Office Journal 28/10/

30 Design Number Class )Sumitomo Electric Industries, Ltd., 5-33, Kitahama 4-chome, Chuo-ku, Osaka-shi, Osaka , Japan Date of Registration 16/11/2010 Carrying Case For An Optical Fiber Fusion Splicer. Number Date Country /05/2010 Japan Design Number Class )Moll Funktionsmobel GmbH Rechbergstrasse 7, D Gruibingen, Germany Date of Registration 24/12/2010 Chair Number Date Country (DM/073813) 24/06/2010 WIPO Design Number Class )Flamagas S.A. Metalurgia 38-42, Barcelona (Spain) Date of Registration 03/01/2011 Device for Producing Spark Used In Pocket Lighter Number Date Country /07/2010 OHIM The Patent Office Journal 28/10/

31 Design Number Class )Agni Jewels Pvt. Ltd., A-10, Nandbuvan Industrial Estate, Mahakali Caves Road, Andheri (East), Mumbai , Maharashtra INDIA Date of Registration 28/04/2011 Ear Ring NA Design Number Class )Saver Glass 3 Rue De La Gare, Feuquieres, France. Date of Registration 29/04/2011 Bottle Number Date Country /11/2010 OHIM Design Number Class )X6D Limited 199 Arch Makarios III Ave, Neocleous House, 3030 Limassol, Cyprus Date of Registration 28/02/2011 3D Glasses Number Date Country 29/368, /08/2010 U.S.A. The Patent Office Journal 28/10/

32 Design Number Class )Honda Motor Co., Ltd., 1-1 Minami Aoyama 2- Chome, Minato- Ku Tokyo Japan Date of Registration 09/05/2011 Instrument Panel For Automobile Number Date Country /11/2010 Japan Design Number Class )Swastik Metal Products 4, Parsana Society, Nr; Patel Nagar, Rajkot GUJARAT (India) Date of Registration 16/05/2011 NA Handle Design Number Class )Utsav Home Linen CS-91/586, Next to BOB, Badli Village, Delhi , India Date of Registration 31/01/2011 Bed Sheet & Pillow Cover Set NA The Patent Office Journal 28/10/

33 Design Number Class )GE Sensing & Inspection Technologies GmbH Robert-Bosch-Str Hurth Germany Date of Registration 19/10/2010 Measuring Apparatus Number Date Country EU /10/2010 EUROPEAN UNION Design Number Class )BEHR A/s Magevej 14 A, 8370 Hadsten, Denmark Date of Registration 10/01/2011 Doors For Refrigerated Sales Counters Number Date Country /07/2010 OHIM Design Number Class )Abb Technology Ag., Affolternstrasse 44, CH-8050 Zurich, Switzerland Date of Registration 12/01/2011 Switchgear Housing Number Date Country /07/2010 Switzerland The Patent Office Journal 28/10/

34 Design Number Class )Ccs Inc., 374 Okakuencho, Shimodachiuri-agaru, Karasuma-dori, Kamigyo-ku, Kyoto-city, Kyoto , Japan Date of Registration 28/03/2011 Light Emitting Diode Lamp Number Date Country /09/2010 Japan Design Number Class )The Procter & Gamble Company One Procter & Gamble Plaza, Cincinnati, Ohio , United States of America Date of Registration 23/03/2011 Packaging Container Number Date Country 29/375, /09/2010 U.S.A. Design Number Class )Mattellone S.r.L., Strada Triestina, Trivignano Udinese-(UD)-Italy An Italian Company Date of Registration 09/09/2010 Frame for Spectacles Number Date Country /03/2010 OHIM The Patent Office Journal 28/10/

35 Design Number Class )Nippon Steel Corporation 6-1, Marunouchi 2-chome, Chiyoda-ku, Tokyo , Japan Date of Registration 13/09/2010 Vibration-Damping Device. Number Date Country /08/2010 Japan Design Number Class )Toyota Jidosha Kabushiki Kaisha., 1, Toyota-Cho, Toyota-Shi, Aichi-Ken, , Japan Date of Registration 03/02/2011 Automobile Number Date Country /08/2010 Republic of Korea Design Number Class )Manitowoc Foodservice Companies, LLC., th Street, Manitowoc, Wisconsin 54220, United States of America., Date of Registration 04/02/2011 Ice Machine Number Date Country 29/367, /08/2010 U.S.A. The Patent Office Journal 28/10/

36 Design Number Class )Hazet-Werk Hermann Zervar GmbH &Co. KG Guldenwerther Bahnhofstrasse 25-29, D Remscheid Date of Registration 04/02/2011 Tool Box Number Date Country /09/2010 OHIM Design Number Class )Bayer Schering Pharma Aktiengesellschaft Mullerstr. 178, Berlin, Germany Date of Registration 29/03/2010 Pill Dispenser. Number Date Country /09/2009 OHIM Design Number Class )Italica Furniture Private Ltd., E MIA, Udaipur, Rajasthan, India Date of Registration 27/12/2010 Chair NA The Patent Office Journal 28/10/

37 Design Number Class )Agni Jewels Pvt. Ltd., A-10, Nandbuvan Industrial Estate, Mahakali Caves Road, Andheri (East), Mumbai , Maharashtra INDIA Date of Registration 28/04/2011 Ear Ring NA Design Number Class )Flair Writing Instruments 63 B/c, Govt. Industrial Estate, Charkop, Kandivali (W) Mumbai (Maharashtra) India Date of Registration 29/04/2011 NA Pen Design Number Class )Mountain Hardwear, Inc., Nw Science Park Drive, Portland, Oregon 97229, United State of America Date of Registration 21/12/2010 Glove NA The Patent Office Journal 28/10/

38 Design Number Class )M/s Commercial Electrical Enterprises 1251, Gali Jamun Wali, Kalan Mahal, Darya Ganj, New Delhi India Date of Registration 08/03/2011 NA Led Base Reflected Light Design Number Class )Mrs. Indu Bala Sharma 56B Pocket DG-2 Vikaspuri New Delhi, India. Date of Registration 10/03/2011 NA Ultra Violet Chamber. Design Number Class )Utsav Home Linen CS-91/586, Next to BOB, Badli Village, Delhi , India. Date of Registration 31/01/2011 Bed Sheet & Pillow Cover Set NA The Patent Office Journal 28/10/

39 Design Number Class )The Gillette Company IP/Legal Patent Department-3E, One Gillette Park, boston, 02127, United States of America Date of Registration 15/02/2011 Shaving Razor Cartridge Number Date Country 29/368, /08/2010 U.S.A. Design Number Class )D. Light Design Limited 1209 Hung Hom Commercial Centre, Tower B, 37 Ma Tau Wai Road, Hung hom, Kowloon, Hong Kong Date of Registration 10/01/2011 Casing For A Solar Powered Light Number Date Country 29/369, /09/2010 U.S.A. Design Number Class )The Procter & Gamble Company One Procter & Gamble Plaza, Cincinnati, Ohio , United States of America Date of Registration 23/03/2011 Packaging Container Number Date Country 29/375, /09/2010 U.S.A. The Patent Office Journal 28/10/

40 Design Number Class )Moll Funktionsmobel GmbH Rechbergstrasse 7, D Gruibingen, Germany Date of Registration 24/12/2010 Chair Number Date Country /06/2010 WIPO Design Number Class )Mr. Rajesh Mayor (An Indian National), S/o. Late Sh. Narinder Mayor Eh 170, New rajinder nagar, Jalandhar , Punjab, (India) Date of Registration 14/03/2011 Boxing Gloves NA Design Number Class )Mannkind Corporation North Avenue Paine, valencia, California 91355, United State of America Date of Registration 18/03/2011 Blister Packaging Number Date Country 29/375, /09/2010 U.S.A. The Patent Office Journal 28/10/

41 Design Number Class )Saverglass 3 Rue de la Gare, Feuquieres, France Date of Registration 29/04/2011 Bottle Number Date Country /11/2010 OHIM Design Number Class )Piaggio & C. S.p.A., Viale Rinaldo Piaggio 25-PONTEDERA (PI), ITALY Date of Registration 09/03/2011 Motor Scooter Number Date Country /10/2010 OHIM Design Number Class )Colgate-Palmolive Company 300 Park Avenue, New York, NY 10022, USA Date of Registration 29/09/2010 Toothbrush Number Date Country 29/358, /03/2010 U.S.A. The Patent Office Journal 28/10/

42 Design Number Class )Thomas J. Shaw 5310 Buena Vista, Frisco, Texas U.S.A. Date of Registration 28/01/2011 Housing For Collection Device For Bodily Fluids Number Date Country 29/366,778 29/07/2010 U.S.A. Design Number Class )Utsav Home Linen CS-91/586, Next to BOB, Badli Village, Delhi , India Date of Registration 31/01/2011 Bed Sheet & Pillow Cover Set NA Design Number Class )Utsav Home Linen CS-91/586, Next to BOB, Badli Village, Delhi , India. Date of Registration 31/01/2011 Bed Sheet & Pillow Cover Set NA The Patent Office Journal 28/10/

43 Design Number Class )Honda Motor Co., Ltd., 1-1 Minamiaoyama 2- Chome, Minato- Ku Tokyo Japan Date of Registration 28/02/2011 Exhaust Cover For Engine Generator Number Date Country /09/2010 Japan Design Number Class )Honda Motor Co., Ltd., 1-1, Minami-Aoyama 2-Chome, Minato-ku, Tokyo, , Japan. Date of Registration 12/11/2010 Front Bumper For Automobiles Number Date Country /05/2010 Japan Design Number Class )Biba Apparels Pvt. Ltd., 45-54, "Whitehall", Kemps Corner, 143 A.K. Marg., Mumbai , Maharshtra, India Date of Registration 28/03/2011 Textile Fabric NA The Patent Office Journal 28/10/

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 2

CONTINUED FROM PART 2 CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 2

CONTINUED FROM PART 2 CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART-1

CONTINUED FROM PART-1 CONTINUED FROM PART-1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

NO.8 ZENGJIA ROAD, JIANGSU ZHONGGUANCUN SCIENCE & TECHNOLOGY INDUSTRIAL PARK, JIANGSU, VIA CAVALIERI DUCATI, BOLOGNA, REPUBLIC OF ITALY

NO.8 ZENGJIA ROAD, JIANGSU ZHONGGUANCUN SCIENCE & TECHNOLOGY INDUSTRIAL PARK, JIANGSU, VIA CAVALIERI DUCATI, BOLOGNA, REPUBLIC OF ITALY 1 BMW AG BMW MOTORRAD AM JULIUSTURM 14-38, D-13599, BERLIN, FEDERAL REPUBLIC OF GERMANY Expiry R2350-16 29-Jun-2016 28-Jun-2019 2 CHANGZHOU HANDE ELECTRIC VEHICLE CO., TLD NO.8 ZENGJIA ROAD, JIANGSU ZHONGGUANCUN

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 3 INTRODUCTION

CONTINUED FROM PART- 3 INTRODUCTION CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 3

CONTINUED FROM PART 3 CONTINUED FROM PART 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

One machine multiple applications.

One machine multiple applications. One machine multiple applications. image 1 image 2 image 3 image 4 Manufacturing of engineering plastics. Processing of PVC. Manufacturing of TPE. Manufacturing of master batches. Coperion worldwide. >

More information

CONTINUED FROM PART- 2 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 2 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Agilent 4UHV Ion Pump Controller. For Ultra High Vacuum

Agilent 4UHV Ion Pump Controller. For Ultra High Vacuum Agilent 4UHV Ion Pump Controller For Ultra High Vacuum The New Agilent 4UHV Ion Pump Controller The new state-of-the-art Agilent 4UHV Ion Pump Controller operates up to four pumps simultaneously and independently.

More information

4CKNYC[A2 A2 AKPFGZ GRU AXLE RAIL / 02

4CKNYC[A2 A2 AKPFGZ GRU AXLE RAIL / 02 P641G RAILWAY INDEX Mitsubishi Materials is constantly engaging ultra modern technologies in the research and development of cutting tools. Results of the research provide solutions for the ever increasing

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

High Accuracy Wire Electrical Discharge Machines

High Accuracy Wire Electrical Discharge Machines Equipment and Construction Work for Machine Installation 1. Floor area and foundation work 4. Electrical work W32FB W53FB 2. Factory air-conditioning equipment Recommended optimal temperature 20 1 Heat

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Maximum retail price list. For SIBCO range of bearing housings and accessories Bearing housings, sleeves, locknuts, lock washers and locating rings

Maximum retail price list. For SIBCO range of bearing housings and accessories Bearing housings, sleeves, locknuts, lock washers and locating rings Maximum retail price list For SIBCO range of bearing housings and accessories Bearing housings, sleeves, locknuts, lock washers and locating rings Effective from 1 st April, 2017 Engineered for optimized

More information

ShowMatch TM DeltaQ TM Array Rigging Frames Installation and Safety Guidelines

ShowMatch TM DeltaQ TM Array Rigging Frames Installation and Safety Guidelines ShowMatch TM DeltaQ TM Array Rigging Frames Installation and Safety Guidelines Important Safety Instructions pro.bose.com Please read this installation guide carefully and save it for future reference.

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

BTS Fair of Shoes, Leather & Leather Goods in Poznan, Poland- August 29th to 31st A Report by Dr. Debasis De, Asst.

BTS Fair of Shoes, Leather & Leather Goods in Poznan, Poland- August 29th to 31st A Report by Dr. Debasis De, Asst. BTS Fair of Shoes, Leather & Leather Goods in Poznan, Poland- August 29th to 31st 2016. A Report by Dr. Debasis De, Asst. Director, CLE-ER Poland (Republic of Poland) is one of the countries in Central

More information

European Patent Office Annual Report 2018 Country profile: Denmark

European Patent Office Annual Report 2018 Country profile: Denmark Annual Report 208 Country profile: Denmark Contact: press@epo.org www.epo.org/media Date of publication: 2 March 209 Growth of European patent applications global 52 703 60 004 59 087 66 594 74 37 +4.6%

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

AUTHORITY FOR ADVANCE RULINGS (INCOME TAX)

AUTHORITY FOR ADVANCE RULINGS (INCOME TAX) DATE: 26.12.2016 (Monday) 1 AAR/971/2010 LG Electronics India Pvt. Ltd.,Greater Noida (UP) S245R(2) CIT (IT), Noida 2 AAR/1064/2011 The Goodyear Tire & Rubber Company, USA S245R(2) CIT(IT) - 2, ND 3 AAR/1214/2011

More information

HORIBA Jobin Yvon GmbH HORIBA Vietnam Company Limite ted Hea d Offi ce HORIBA ITALIA Srl Mil ano Office HORIBA Korea Ltd. Seoul Branch HORIBA Instruments Inc. Edison office HORIBA FRANCE SAS HORIBA India

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

European Patent Office Annual Report 2017 Country profile: Netherlands

European Patent Office Annual Report 2017 Country profile: Netherlands European Patent Office Annual Report 207 Country profile: Netherlands Contact: press@epo.org www.epo.org/media Date of publication: 7 March 208 Growth of European patent applications global 48 027 52 703

More information

NEW! Ultra EC Motors. Ultra performance in a complete family of brushless slotless miniature motors.

NEW! Ultra EC Motors. Ultra performance in a complete family of brushless slotless miniature motors. NEW! Ultra EC Motors Ultra performance in a complete family of brushless slotless miniature motors. No two applications are the same. One design definitely does not fit all. Not when your application has

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Elevate the user experience with sleek and intuitive design

Elevate the user experience with sleek and intuitive design Elevate the user experience with sleek and intuitive design Aesthetic options for every project and price point. lutron.com/palladiom Keypad shown in Satin Nickel (SN) Understated elegance for where you

More information

KR15. LM Guide Miniature Actuator. KR Series Actuators with Integrated LM Guide and Ball Screw in a Compact Stainless Steel Body. CATALOG No.

KR15. LM Guide Miniature Actuator. KR Series Actuators with Integrated LM Guide and Ball Screw in a Compact Stainless Steel Body. CATALOG No. LM Guide Miniature Actuator KR1 KR Series Actuators with Integrated LM Guide and Ball Screw in a Compact Stainless Steel Body US, EPC Patent pending CATALOG No.76E LM Guide Actuator KR1 Miniature LM Guide

More information

DC MOTORS. Crompton Greaves EVERYDAY SOLUTIONS

DC MOTORS. Crompton Greaves EVERYDAY SOLUTIONS Crompton Greaves EVERYDAY SOLUTIONS DC MOTORS LT MOTORS DIVISION A - 6/2, M.I.D.C., AHMEDNAGAR - 414111. MAHARASHTRA. TEL : +91 (0241) 2776 151-154, 2776146, 2776187. FAX : +91 (0241) 2777508 INTRODUCTION

More information

Precision Motors for Infusion Systems. Optimized performance for reliability, versatility and patient comfort

Precision Motors for Infusion Systems. Optimized performance for reliability, versatility and patient comfort Precision Motors for Infusion Systems Optimized performance for reliability, versatility and patient comfort Motor designs validated by decades of success in the field. For over 40 years, Portescap has

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Elevate the user experience with sleek and intuitive design

Elevate the user experience with sleek and intuitive design Elevate the user experience with sleek and intuitive design Aesthetic options for every project and price point. lutron.com/palladiom Understated elegance for where you work. Distinct character for where

More information

4mm(H)x8mm(W) Micro LM Guides

4mm(H)x8mm(W) Micro LM Guides 4mm(H)x8mm(W) Micro LM Guides US, EPC, Patent Pending CATALOG No.293E Micro LM Guides RSR3M/3N The micro size allows space-saving design. Can be used in various fields of industry including micro machines

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

ISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO

ISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO P-EX01-A Solenoid Valve (with M Connector) Conforming to ISO 1507-1, Large capacity EVS1-01 (Size: 01) EVS1-0 (Size: 0) Light weight Size 01 (-position): 0.6kg Size 0 (-position): 0.18kg Flow rate 1000L/min

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

D6..M.. Butterfly Valves

D6..M.. Butterfly Valves D6..M.. Butterfly Valves Technical Databook Ver. Version 2 2.0 Belimo Asia Pacific D6..MH/MW Series Butterfly Valves Trade Selection by Belimo 2-way Butterfly Valves flanged DN50...500 For Open/Close or

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Labor Productivity, Compensation Costs, and U.S. International Competitiveness

Labor Productivity, Compensation Costs, and U.S. International Competitiveness Cornell University ILR School DigitalCommons@ILR Federal Publications Key Workplace Documents June 1993 Labor Productivity, Compensation Costs, and U.S. International Competitiveness U.S. Bureau of Labor

More information

View our inventory TRIVAC E 2

View our inventory TRIVAC E 2 Vacuum Solutions Application Support Service LEYBOLD VACUUM ET 01.603/1.02 View our inventory TRIVAC E 2 D 5 E; D 10 E; D 16 E Dual-Stage Rotary Vane Vacuum Pump Valid from Serial-No.: T2 TRIVAC D5E: 140030

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Accredited to ISO/IEC 17021-1:2015 to provide environmental 4th Floor Vivo Building 30 Stamford Street SE1 9LQ United Kingdom Contact: Mr

More information

TRANSPORT - RENUKOOT Printed Jan. 2018

TRANSPORT - RENUKOOT Printed Jan. 2018 TRANSPORT - RENUKOOT Printed Jan. 2018 HINDALCO Hindalco Catalogue Contents Page No. A. Hindalco - An Overview B. Specifications... 06... 08 1. Bus Windows... 12 2. Bus Structurals... 19 3. Moulding...

More information

Setting a New Standard in Emission Testing MOTOR EXHAUST GAS ANALYZER TEST SYSTEM CONCEPT MEXA-ONE offers an intuitive user interface with a highly efficient hardware and software design. This results in

More information

CONTINUED FROM PART- 2 INTRODUCTION. Publication of the matter relating to Designs is being published in the Official Journal of The Patent Office.

CONTINUED FROM PART- 2 INTRODUCTION. Publication of the matter relating to Designs is being published in the Official Journal of The Patent Office. CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Installation instructions

Installation instructions www.somfy.com Sonesse 0 DCT Installation instructions Ref :505080A Please read installation instructions and programming instructions completely prior to proceeding with installation and programming. Failure

More information

Export Oriented Enterprises (EOE) 1st Quarter Introduction This issue of Economic and Social Indicators (ESI) presents the results of the

Export Oriented Enterprises (EOE) 1st Quarter Introduction This issue of Economic and Social Indicators (ESI) presents the results of the Export Oriented Enterprises (EOE) 1st Quarter 2018 1. Introduction This issue of Economic and Social Indicators (ESI) presents the results of the Quarterly Survey of Employment among Export Oriented Enterprises

More information

Electric Lowering & Raising System 20kg PRODUCT TYPE. Max. weight of light fitting Lowering distance. 4. Lamp circuits. No. of circuit No.

Electric Lowering & Raising System 20kg PRODUCT TYPE. Max. weight of light fitting Lowering distance. 4. Lamp circuits. No. of circuit No. Electric Lowering & Raising System The cost effective maintenance solution for luminaires FEATURES Designed for use of heavier weight light fittings. TYPICAL APPLICATIONS Workshops, Factories, Warehouses

More information

Installation Instructions

Installation Instructions c Installation Instructions Sequential Loop -Position Electronic Pressure Regulator Kits This manual provides instructions for Cascade Electronic Pressure Regulator and Indicator System. The kits provide

More information

SIAM Viewpoint for improved Inspection & Maintenance in India GITE Regional Workshop on Transport Sector Inspection & Maintenance Policy

SIAM Viewpoint for improved Inspection & Maintenance in India GITE Regional Workshop on Transport Sector Inspection & Maintenance Policy Viewpoint for improved Inspection & Maintenance in India GITE Regional Workshop on Transport Sector Inspection & Maintenance Policy 10 th -12 th December 2001 Bangkok Indian Scenario Two types of I&M programmes

More information

Export Oriented Enterprises (EOE) 3 rd Quarter Introduction This issue of Economic and Social Indicators (ESI) presents the results of the

Export Oriented Enterprises (EOE) 3 rd Quarter Introduction This issue of Economic and Social Indicators (ESI) presents the results of the Export Oriented Enterprises (EOE) 3 rd Quarter 2017 1. Introduction This issue of Economic and Social Indicators (ESI) presents the results of the Quarterly Survey of Employment among Export Oriented Enterprises

More information

15K Series Extented Mini Right Angle Drill Attachment

15K Series Extented Mini Right Angle Drill Attachment Parts Manual PL30-2052EN 15K27-5172 Series Extented Mini Right Angle Drill Attachment For additional product information visit our website at http://www.apextoolgroup.com PL30-2052EN Dotco Nomenclature

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

IFC07 E-03. USB Connectors HDMI Connectors DisplayPort Connectors

IFC07 E-03. USB Connectors HDMI Connectors DisplayPort Connectors ELEC T R ONIC COMPONEN T S IFC07 E-03 USB Connectors HDMI Connectors DisplayPort Connectors Contents Contents 1 USB3.0 Connectors Plug Cables 2 USB Connectors Mini-B Receptacles 3 Plugs 4-5 HDMI Connectors

More information

Our Most Important Connection is with You. NSX ARINC 600. Power and Performance NSX ARINC 600

Our Most Important Connection is with You. NSX ARINC 600. Power and Performance NSX ARINC 600 Our Most Important Connection is with You. NSX ARINC 600 Power and Performance NSX ARINC 600 NSX (ARINC 600) Radiall s NSX Arinc 600 series has been used for more than 30 years to connect high performance

More information

Export Oriented Enterprises (EOE) 2nd Quarter 2018

Export Oriented Enterprises (EOE) 2nd Quarter 2018 Export Oriented Enterprises (EOE) 2nd Quarter 2018 1. Introduction This issue of Economic and Social Indicators (ESI) presents the results of the Quarterly Survey of Employment among Export Oriented Enterprises

More information

Parts Manual. cascade. corporation. Bale Clamp. Model 40D-BCB-55A R0. Serial Number

Parts Manual. cascade. corporation. Bale Clamp. Model 40D-BCB-55A R0. Serial Number c Parts Manual Model Serial Number Bale Clamp 40D-BCB-A R0 corporation To Order Parts call: 888-227-2233, Fax: 888-329-0234 OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Internet: www.cascorp.com

More information

AUSTRIA. Table 1. FDI flows in the host economy, by geographical origin. (Millions of US dollars)

AUSTRIA. Table 1. FDI flows in the host economy, by geographical origin. (Millions of US dollars) Table 1. FDI flows in the host economy, by geographical origin World 5 690 138 6 195 3 184 10 784 7 933 31 154 6 858 9 303 840 10 618 5 760 Developed economies 5 740 13 5 341 2 689 10 137 6 291 29 721

More information

Installation Instructions

Installation Instructions c Installation Instructions -Position Electronic Pressure Regulator Kits This manual provides instructions for Cascade Electronic Pressure Regulator and Indicator System. The kits provide selectable clamp

More information

10LF and 12LF Series Right Angle Grinders

10LF and 12LF Series Right Angle Grinders Product Manual 10LF and 12LF Series Right Angle Grinders XX L F 2 XX - XX Tool Series 10 = Aluminum Housing 12 = Ergo Housing Throttle Type L = Locking Lever Motor Size F = 0.4 hp Handle Style 2 = Right

More information

Slide Bearings For Industrial, Marine And Offshore Installations

Slide Bearings For Industrial, Marine And Offshore Installations Slide Bearings For Industrial, Marine And Offshore Installations The advantages of working with RENK Hannover are many; here are a few of particular interest: RENK can boast a depth of experience in bearings

More information

Parts Manual PL EN 05/19/ L4321 Router. For additional product information visit our website at

Parts Manual PL EN 05/19/ L4321 Router. For additional product information visit our website at Parts Manual 10L4321 Router For additional product information visit our website at http://www.apextoolgroup.com Product Information The original language of this manual is English. Product Safety Information:

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Parts Manual EN PL30-12R04 07/21/ R04 Series 0.1 HP Inline Pencil Grinder

Parts Manual EN PL30-12R04 07/21/ R04 Series 0.1 HP Inline Pencil Grinder Parts Manual PL30-12R04 12R04 Series 0.1 HP Inline Pencil Grinder For additional product information visit our website at http://www.apextoolgroup.com Dotco Nomenclature 12 R 04 XX - X X Series 12 = Ergo

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model 36G-CCT Tipping Clamp Catalog Number 36G74237 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com Blank 1 Safety Decals 4 1 3 2

More information

Installation Instructions

Installation Instructions c Installation Instructions Pressure Regulator Kit 6804769 This manual provides instructions for Cascade Pressure Regulator Kit 68047669 for carton clamps. The kit includes a valve, a driver operated high-low

More information

Annex IV. True nationality of the 20 largest fleets by flag of registration, as at 1 January 2011 a

Annex IV. True nationality of the 20 largest fleets by flag of registration, as at 1 January 2011 a 194 Annex IV. True nationality of the 20 largest fleets by flag of registration, as at 1 January 2011 a Antigua and Barbuda Bahamas China Belgium 0 0-9 122 0.2 1 59 0.1 Bermuda 0 0-17 1 907 2.8 0 0 - Brazil

More information