CONTINUED FROM PART- 2

Size: px
Start display at page:

Download "CONTINUED FROM PART- 2"

Transcription

1 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in the Official Journal of The Patent Office. This Journal is being published on weekly basis on every Friday covering the various proceedings on Designs as required according to the provisions of under Rule 22, 25, 27 and 39 of the Design (Amendment) Rules, All the enquiries on this Official Journal and other information as required by the public should be addressed to the Controller General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that the content can be enriched. The Patent Office Journal 13/08/

2 DESIGN ACT 2000 (Under Section 31) RECTIFICATION OF REGISTER M/s. Anand & Anand., the agent of the Registered. Proprietor, Carponovum AB Kyrkogatan 19, SE Lund, Sweden, Swedish Joint Stock Company, Swedish Law has filed an application on Form-17 for rectification of name of the article from the Register of Design as follows:- Design No s Entered name of the article Joint Anastomosis Rings Without Catheters But With O-Rings. Changed to Joint Anastomosis Rings Without Catheters and O-Rings. Notice of opposition to the rectification of Register of Design may be given as per rule 40 of the Design Rules, The Patent Office Journal 13/08/

3 REGISTRATION OF DESIGNS The following designs have been registered. They are now open for public inspection. In the following each entry the Date of Registration is shown. The Number, Date and Country are also shown Design Number Class )Heka Dental ApS Baldershoj 38, Dk-2635 Ishoj, Denmark Date of Registration 10/07/2007 Dentist's Chair Number Date Country /01/2007 OHIM Design Number Class )SAMSUNG ELECTRONICS CO. LTD., 416, MAETAN-DONG, YEONGTONG-GU, SUWON-SI, GYEONGGI- DO, KOREA. Date of Registration 25/04/2008 DRUM TYPE WASHING MACHINE Design Number Class )PLAYTEX PRODUCTS, INC., 300 NYALA FARMS ROAD, WESTPORT, CONNCETICUT 06880, USA. Date of Registration 16/05/2008 waste disposal device Number Date Country 29/293,319 16/11/2007 U.S.A. The Patent Office Journal 13/08/

4 Design Number Class )TELCO WATER TECHNOLOGY PVT. LTD., C-28, 2ND FLOOR, JANAK CINEMA COMPLEX, JANAKPURI, NEW DELHI , INDIA. Date of Registration 19/05/2008 WATER PURIFIER Design Number Class )William Goodacre & Sons India Pvt.Ltd., XVIII/1146 Revi Karunakaran Road, Alleppey, Kerela , India Date of Registration 19/03/2009 Mat Design Number Class )Michelin Recherche Et Technique S.A. Route Louis Braille 10, 12 CH 1763 Granges Paccot, Switzerland Date of Registration 23/07/2008 Tyre Tread Number Date Country 29/303,276 05/02/2008 U.S.A. The Patent Office Journal 13/08/

5 Design Number Class )Shagun Bangles Shop No-127,1st Floor Ijmima Complex,Raheja Metroplex,Link Road, Malad (W) Mumbai ,Maharashtra India Date of Registration 28/07/2008 Ear Pandants Design Number Class )Shagun Bangles Shop No.127 1st Floor,Ijmima Complex,Raheja Metroplex Behind Goregaon Sports Club Link Road,Malad (W) Mumbai ,Maharashtra,India Date of Registration 28/07/2008 Ear Pendants Design Number Class )Anand Agency 4 Nayapura Indore M.P.India Date of Registration 01/08/2008 Pouch The Patent Office Journal 13/08/

6 Design Number Class )Apollo Plastic Industries 10,Ashirwad Building,K.D.Road Vile Parle(W),Mumbai Maharashtra India Date of Registration 01/08/2008 Can Design Number Class )GULZAR METAL WORKS, F-101, NEW SEELAM PUR, DELHI , INDIA. Date of Registration 31/12/2007 Channel Bracket Design Number Class )B. D.Industries., 5, Raj Rajeshwari Road, Opposite Naval Stores Main Gate, LBS Marg, Narayan Nagar, Ghatkopar, (W) Mumbai , Maharashtra, India. Date of Registration 06/01/2009 Road Safety Device The Patent Office Journal 13/08/

7 Design Number Class )IJS, Electronics., W-25, Okhla Industrial Area, Phase-2, New Delhi , India. Date of Registration 09/01/2009 Led Disk Tower Design Number Class )Sumitomo Metal Logistics Service Co., Ltd., 1-17, Tsukiji 4-Chome, Chuo-Ku, Tokyo, , Japan. Date of Registration 15/01/2009 Pallet for Transport Number Date Country /07/2008 Japan Design Number Class )GLEN APPLIANCES PVT. LTD., 1-34, DLF INDUSTRIAL AREA, PHASE-1, FARIDABAD , HARYANA, INDIA. Date of Registration 02/06/2008 Gas Stove The Patent Office Journal 13/08/

8 Design Number Class )Bipinbhai Chanabhai Chothani "Hitesh Furnitur Fittings", Shri hari Industrial Zone-1, Aji Ring Road, Bay Pass, near:- Radha Palace Hotel, 400 Feet Road, Rajkot-2, Gujarat, India Date of Registration 12/08/2008 Design Number Class Handle 1)Rameshbhai Narsibhai Limbasiya 2,Gokul Nagar,Opp-Shreeji Times,500Feet Road Kothariya Main Road, Rajkot-3 Gujarat-India Date of Registration 12/08/2008 Locking For Closing Device Design Number Class )3M Innovative Properties Company 3M Center, Saint Paul, Minnesota , USA Date of Registration 12/12/2006 Bandage Number Date Country 29/261,303 12/06/2006 U.S.A. The Patent Office Journal 13/08/

9 Design Number Class )Samsung Electronics Co.Ltd., 416, Maetan-Dong, Yeongtong-Gu, Suwon-Si, Gyeonggi- Do, Korea Date of 19/03/2008 Registration Mobile Phone Number Date Country /03/2008 Korea(South) Design Number Class )SCHWAN-STABILO SCHWANHAEUSSER GMBH & CO. KG., SCHWANWEG 1, HEROLDSBERG, GERMANY. Date of 16/06/2008 Registration "WRITING INSTRUMENT" Design Number Class )SCHWAN-STABILO SCHWANHAEUSSER GMBH & CO. KG., SCHWANWEG 1, HEROLDSBERG, GERMANY. Date of Registration 16/06/2008 "WRITING INSTRUMENT" The Patent Office Journal 13/08/

10 Design Number Class )MA Design India Pvt. Ltd., C-26, Sector-63,Noida, U.P., India Date of Registration 20/06/2008 Holder( for Wine Bottle) Design Number )Ma Design India Pvt. Ltd. C-26, Sector 63, Noida, U.P., Pin Code: , India Date of Registration 20/06/2008 Platter Design Number )MA DESIGN INDIA PRIVATE LIMITED., Date of Registration 20/06/2008 Platter The Patent Office Journal 13/08/

11 Design Number )MA Design India Pvt. Ltd., C-26, Sector-63,Noida, U.P., India Date of 20/06/2008 Registration Bowl Design Number )MA Design India Pvt. Ltd., C-26, Sector-63,Noida, U.P., India Date of Registration 20/06/2008 Bowl Design Number Class )MA DESIGN INDIA PVT. LTD., Date of Registration 20/06/2008 CUTTING BOARD The Patent Office Journal 13/08/

12 Design Number )MA DESIGN INDIA PVT. LTD., Date of Registration 20/06/2008 CUP Design Number )Ma Design India Pvt. Ltd., C-26, Sector-63, Noida, U.P., India Date of 20/06/2008 Registration Dish Design Number Class )Ma Design India Pvt. Ltd., C-26, Sector-63, Noida, U.P., India Date of Registration 20/06/2008 Candle Holder The Patent Office Journal 13/08/

13 Design Number Class )MA DESIGN INDIA PRIVATE LIMITED., Date of 20/06/2008 Registration CANDLE HOLDER Design Number )MA DESIGN INDIA PRIVATE LIMITED., Date of Registration 20/06/2008 LID Design Number )MA DESIGN INDIA PRIVATE LIMITED., Date of Registration 20/06/2008 LID The Patent Office Journal 13/08/

14 Design Number Class )MA DESIGN INDIA PVT. LTD., Date of Registration 20/06/2008 DECORATIVE ARTICLE Design Number Class )MA DESIGN INDIA PRIVATE LIMITED., Date of Registration 25/06/2008 Tray Design Number Class )Ma Design India Pvt. Ltd., C-26, Sector-63, Noida, U.P., India Date of Registration 25/06/2008 Tray The Patent Office Journal 13/08/

15 Design Number )Ma Design India Pvt. Ltd., C-26, Sector-63, Noida, U.P., India Date of Registration 25/06/2008 Bowl Design Number )Ma Design India Pvt. Ltd., C-26, Sector-63, Noida, U.P., India Date of Registration 25/06/2008 Bowl Design Number )MA DESIGN INDIA PRIVATE LIMITED., Date of Registration 25/06/2008 Ice Bucket The Patent Office Journal 13/08/

16 Design Number )MA DESIGN INDIA PRIVATE LIMITED., Date of Registration 25/06/2008 Jug Design Number Class )MA DESIGN INDIA PRIVATE LIMITED., Date of Registration 25/06/2008 Cheese Knife Design Number Class )MA DESIGN INDIA PRIVATE LIMITED., Date of Registration 25/06/2008 Table The Patent Office Journal 13/08/

17 Design Number Class )MA DESIGN INDIA PRIVATE LIMITED., Date of 25/06/2008 Registration Box Design Number Class )MA DESIGN INDIA PRIVATE LIMITED., Date of Registration 25/06/2008 Photo frame Design Number Class )EASTERN MEDIKIT LIMITED., 3, DR. G.C. NARANG MARG, DELHI , INDIA. Date of Registration 25/06/2008 SPARE PART OF INTRAVENOUS CANNULA The Patent Office Journal 13/08/

18 Design Number Class )SONY CORPORATION., KONAN, MINATO-KU, TOKYO, JAPAN. Date of Registration 26/06/2008 MEMORY CARD Number Date Country /06/2008 Japan Design Number Class )NSK-WARNER K.K., NISSEI BLDG., 1-6-3, OHSAKI, SHINAGAWA-KU, TOKYO, , JAPAN. Date of Registration 27/06/2008 one -way clutch Number Date Country /01/2008 Japan Design Number Class )NSK-WARNER K.K., NISSEI BLDG., 1-6-3, OHSAKI, SHINAGAWA-KU, TOKYO, , JAPAN. Date of Registration 27/06/2008 one -way clutch Number Date Country /04/2008 Japan The Patent Office Journal 13/08/

19 Design Number Class )SONY CORPORATION., KONAN, MINATO-KU, TOKYO, JAPAN. Date of Registration 27/06/2008 MEMORY CARD Number Date Country /06/2008 Japan Design Number Class )SONY CORPORATION., KONAN, MINATO-KU, TOKYO, JAPAN. Date of Registration 27/06/2008 ADAPTER FOR MEMORY CARD Number Date Country /06/2008 Japan Design Number Class )MATSUSHITA ELECTRIC INDUSTRIAL CO. LTD., 1006 OAZA KADOMA, KADOMA-SHI, OSAKA , JAPAN. Date of Registration 27/06/2008 BATTERY Number Date Country /12/2007 Japan The Patent Office Journal 13/08/

20 Design Number Class )The British Masters SA Avenue Leopold-Robert 23, 2300 LA Chaux-De-Fonds, Switzerland Date of Registration 27/06/2008 Wristwatch Number Date Country /04/2008 Switzerland Design Number Class )Preciosa Opletalova 3197, Jablonec and Nisou, Czech Republic Date of Registration 21/11/2008 Gemstone Number Date Country EM /05/2008 OHIM Design Number Class )Preciosa Opletalova 3197, Jablonec nad Nisou, Czech Republic Date of Registration 21/11/2008 Gemstone Number Date Country EM /05/2008 OHIM The Patent Office Journal 13/08/

21 Design Number Class )Societe De Technologie Michelin 23 Rue Breschet Clermont-Ferrand, France 2)Michelin Recherche Et Technique, S.A. Date of Registration 02/07/2008 Tyre Design Number Class )Mahika Packaging(India) Ltd 2/3,Kasturba Talkies Compound,Station Road,Malad (W) Mumbai Maharashtra India Date of Registration 02/07/2008 Bottle Design Number )Mahika Packging (India) Ltd 2/3 Kasturba Talkies Compound Station Road Malad(W) Mumbai Maharashtra India Date of Registration 02/07/2008 Lid For Bottle The Patent Office Journal 13/08/

22 Design Number Class )Avanti Oveseas Pct Ltd D-37,South Extn.Part -II,New Delhi India Date of Registration 03/07/2008 Dog's Bowl Stand Design Number Class )HONDA MOTOR CO. LTD., 1-1, MINAMI-AOYAMA 2-CHOME, MINATO-KU, TOKYO, JAPAN. Date of Registration 15/07/2008 FRONT COMBINATION LAMP FOR AUTOMOBILE Number Date Country /01/2008 Japan Design Number Class )Crompton Greaves Limited, 6th Floor, CG House, Dr Annie Besant Road, Worli, Mumbai , Maharashtra, India Date of Registration 09/02/2009 Lighting Fixture The Patent Office Journal 13/08/

23 Design Number Class )Weir Minerals Australia Ltd., 1 Marden Street, Artarmon, New South Wales 2064, Australia. Date of Registration 13/02/2009 Impeller Number Date Country 13910/ /08/2008 Australia The Patent Office Journal 13/08/

CONTINUED FROM 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 2

CONTINUED FROM PART 2 CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

AUTHORITY FOR ADVANCE RULINGS (INCOME TAX)

AUTHORITY FOR ADVANCE RULINGS (INCOME TAX) DATE: 26.12.2016 (Monday) 1 AAR/971/2010 LG Electronics India Pvt. Ltd.,Greater Noida (UP) S245R(2) CIT (IT), Noida 2 AAR/1064/2011 The Goodyear Tire & Rubber Company, USA S245R(2) CIT(IT) - 2, ND 3 AAR/1214/2011

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

NEW! Ultra EC Motors. Ultra performance in a complete family of brushless slotless miniature motors.

NEW! Ultra EC Motors. Ultra performance in a complete family of brushless slotless miniature motors. NEW! Ultra EC Motors Ultra performance in a complete family of brushless slotless miniature motors. No two applications are the same. One design definitely does not fit all. Not when your application has

More information

Signature: Date: April

Signature: Date: April Samsung Electronics Co., Ltd 129, Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea Declaration of REACH Substances of Very High Concern (SVHCs) Disclosure Model: LED Component (Model List: See page

More information

CONTINUED FROM PART- 2 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 2 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 2

CONTINUED FROM PART 2 CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 3

CONTINUED FROM PART 3 CONTINUED FROM PART 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

High Accuracy Wire Electrical Discharge Machines

High Accuracy Wire Electrical Discharge Machines Equipment and Construction Work for Machine Installation 1. Floor area and foundation work 4. Electrical work W32FB W53FB 2. Factory air-conditioning equipment Recommended optimal temperature 20 1 Heat

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART-1

CONTINUED FROM PART-1 CONTINUED FROM PART-1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Precision Motors for Infusion Systems. Optimized performance for reliability, versatility and patient comfort

Precision Motors for Infusion Systems. Optimized performance for reliability, versatility and patient comfort Precision Motors for Infusion Systems Optimized performance for reliability, versatility and patient comfort Motor designs validated by decades of success in the field. For over 40 years, Portescap has

More information

Parts Manual EN PL30-12R04 07/21/ R04 Series 0.1 HP Inline Pencil Grinder

Parts Manual EN PL30-12R04 07/21/ R04 Series 0.1 HP Inline Pencil Grinder Parts Manual PL30-12R04 12R04 Series 0.1 HP Inline Pencil Grinder For additional product information visit our website at http://www.apextoolgroup.com Dotco Nomenclature 12 R 04 XX - X X Series 12 = Ergo

More information

15K Series Extented Mini Right Angle Drill Attachment

15K Series Extented Mini Right Angle Drill Attachment Parts Manual PL30-2052EN 15K27-5172 Series Extented Mini Right Angle Drill Attachment For additional product information visit our website at http://www.apextoolgroup.com PL30-2052EN Dotco Nomenclature

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

10LF and 12LF Series Right Angle Grinders

10LF and 12LF Series Right Angle Grinders Product Manual 10LF and 12LF Series Right Angle Grinders XX L F 2 XX - XX Tool Series 10 = Aluminum Housing 12 = Ergo Housing Throttle Type L = Locking Lever Motor Size F = 0.4 hp Handle Style 2 = Right

More information

CONTINUED FROM PART 2

CONTINUED FROM PART 2 CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

10N10 Series Inline Grinder

10N10 Series Inline Grinder Parts Manual 0N0 Series Inline Grinder For additional product information visit our website at http://www.apextoolgroup.com Nomenclature and Specifications Product Type 0 = Aluminum Housing Grinder Throttle

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model F-Series Sideshifter Serial Number -SSS-A156R0 cascade corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234

More information

SUBMERSIBLE 4" PUMPS 4 PUMP - SVM SERIES

SUBMERSIBLE 4 PUMPS 4 PUMP - SVM SERIES SUBMERSIBLE 4" PUMPS 4 PUMP - SVM SERIES 1 TABLE OF CONTENTS 4 PUMP SERIES PAGE SVM30...4 SVM55...6 SVM70...8 SVM100...10 1.32 1.98 2.64 3.30 3.96 4.62 5.28 5.94 6.61 7.27 EN ISO 9906 SUBMERSIBLE PUMPS

More information

EHP2 Stainless steel piston accumulator

EHP2 Stainless steel piston accumulator The Professional Choice in Fluid Management EHP2 Stainless steel piston accumulator 2 OILTECH EHP2 STAINLESS STEEL PISTON ACCUMULATOR Oiltech, a member of the Olaer Group, and a global player specialising

More information

HORIBA Jobin Yvon GmbH HORIBA Vietnam Company Limite ted Hea d Offi ce HORIBA ITALIA Srl Mil ano Office HORIBA Korea Ltd. Seoul Branch HORIBA Instruments Inc. Edison office HORIBA FRANCE SAS HORIBA India

More information

Parts Manual PL EN 05/19/ L4321 Router. For additional product information visit our website at

Parts Manual PL EN 05/19/ L4321 Router. For additional product information visit our website at Parts Manual 10L4321 Router For additional product information visit our website at http://www.apextoolgroup.com Product Information The original language of this manual is English. Product Safety Information:

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model Serial Number F-Series Sideshifter -SSS-A147R0 cascade corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234

More information

ISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO

ISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO P-EX01-A Solenoid Valve (with M Connector) Conforming to ISO 1507-1, Large capacity EVS1-01 (Size: 01) EVS1-0 (Size: 0) Light weight Size 01 (-position): 0.6kg Size 0 (-position): 0.18kg Flow rate 1000L/min

More information

Slide Bearings Type HG

Slide Bearings Type HG Innovative Power Transmission Slide Bearings Type HG Slide Bearings Type HG Type HG Slide Bearings Slide Bearings Type HG Locating bearings for horizontal hydro turbines operate under high axial loads,

More information

Custom Designed for Height Adjustable Solutions ERGO MOTION

Custom Designed for Height Adjustable Solutions ERGO MOTION Custom Designed for Height Adjustable Solutions ERGO MOTION 2 TiMOTION Ergo Motion 3 99% of TiMOTION s customer application requirements can be solved by our experienced personnel providing highly customized

More information

Airetool. Gas Line Cleaners Range: 3/4 (19.05mm) to 1-1/2 (38.10mm) Operating & Service Manual PL EN 10/01/2015

Airetool. Gas Line Cleaners Range: 3/4 (19.05mm) to 1-1/2 (38.10mm) Operating & Service Manual PL EN 10/01/2015 Operating & Service Manual PL9-6026EN 0/0/205 Airetool Gas Line Cleaners Range: 3/4 (9.05mm) to -/2 (38.0mm) For additional product information visit our website at http://www.apextoolgroup.com PL9-6026EN

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

One machine multiple applications.

One machine multiple applications. One machine multiple applications. image 1 image 2 image 3 image 4 Manufacturing of engineering plastics. Processing of PVC. Manufacturing of TPE. Manufacturing of master batches. Coperion worldwide. >

More information

DC MOTORS. Crompton Greaves EVERYDAY SOLUTIONS

DC MOTORS. Crompton Greaves EVERYDAY SOLUTIONS Crompton Greaves EVERYDAY SOLUTIONS DC MOTORS LT MOTORS DIVISION A - 6/2, M.I.D.C., AHMEDNAGAR - 414111. MAHARASHTRA. TEL : +91 (0241) 2776 151-154, 2776146, 2776187. FAX : +91 (0241) 2777508 INTRODUCTION

More information

Drive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects

Drive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects 09.2007 / a 4183 en - 03.2008 / b Drive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects www.leroy-somer.com Drive systems

More information

Parts Manual. cascade. Single-Double Pallet Handler. Model 50D-ES-012. Serial Number

Parts Manual. cascade. Single-Double Pallet Handler. Model 50D-ES-012. Serial Number c Parts Manual Model Single-Double Pallet Handler Serial Number 50D-ES-02 To Order Parts call: 888-227-22, Fax: 888-29-024 OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Safety Decals

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

10N M6 Series Right Angle Grinder

10N M6 Series Right Angle Grinder Parts Manual PL30-2042EN 10N1200-36M6 Series Right Angle Grinder For additional product information visit our website at http://www.apextoolgroup.com PL30-2042EN Dotco Nomenclature and Specifications Product

More information

EHP2 Carbon steel piston accumulator

EHP2 Carbon steel piston accumulator The Professional Choice in Fluid Management EHP2 Carbon steel piston accumulator 2 OILTECH EHP2 CARBON STEEL PISTON ACCUMULATOR Oiltech, a member of the Olaer Group, and a global player specialising in

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model Sideshifter Serial Number 60E-SSS-359 corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet:

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Installation instructions

Installation instructions www.somfy.com Sonesse 0 DCT Installation instructions Ref :505080A Please read installation instructions and programming instructions completely prior to proceeding with installation and programming. Failure

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model Serial Number 65F Sideshifter 65F-SSS-B796 R1 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com I NSPECTION & MAINTENANCE WARNING:

More information

Parts Manual. cascade. Single-Double Pallet Handler. Model 55E-FD-449. Serial Number

Parts Manual. cascade. Single-Double Pallet Handler. Model 55E-FD-449. Serial Number c Parts Manual Model Single-Double Pallet Handler Serial Number -FD-449 For Technical Assistance call: 800-7-33, Fax: 888-39-807 To Order Parts call: 888-7-33, Fax: 888-39-034 OR Write: Cascade Corporation,

More information

Slide Bearings For Industrial, Marine And Offshore Installations

Slide Bearings For Industrial, Marine And Offshore Installations Slide Bearings For Industrial, Marine And Offshore Installations The advantages of working with RENK Hannover are many; here are a few of particular interest: RENK can boast a depth of experience in bearings

More information

10LF and 12LF Series Right Angle Grinder and Sander

10LF and 12LF Series Right Angle Grinder and Sander Product Manual 4-842EN 10LF and LF Series Right Angle Grinder and Sander For additional product information visit our website at http://www.apextoolgroup.com 4-842EN Dotco Nomenclature XX L F 2 XX - XX

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

EROWA MTS The EROWA MTS modular workholding system.

EROWA MTS The EROWA MTS modular workholding system. EROWA MTS The EROWA MTS modular workholding system. Reduce set-up time! System solutions from one single source EROWA MTS The flexible zero point palletizing system for production. Vertical Machining Centers

More information

CONTINUED FROM PART- 3 INTRODUCTION

CONTINUED FROM PART- 3 INTRODUCTION CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

ARTS MANUAL. 70F Fork Clamp. Manual Number R-0. cascade. Cascade is a Registered Trademark of Cascade Corporation

ARTS MANUAL. 70F Fork Clamp. Manual Number R-0. cascade. Cascade is a Registered Trademark of Cascade Corporation P ARTS MANUAL 0F Fork Clamp Manual Number 89 R-0 cascade Cascade is a Registered Trademark of Cascade Corporation 80-0D-CFS-B About This Manual Introduction This Manual shows the parts breakdown for standard

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Parts Manual EN

Parts Manual EN Parts Manual 45-8213EN PL30-1212 12L12 and 12S12 Series 0.3 HP Right Angle Grinder/Sander For additional product information visit our website at http://www.apextoolgroup.com 45-8213EN Dotco Nomenclature

More information

N60 Rotary Vane Pneumatic Motor

N60 Rotary Vane Pneumatic Motor Parts Manual PL70-1043EN 24-1312N60 Rotary Vane Pneumatic Motor For additional product information visit our website at http://www.apextoolgroup.com PL70-1043EN Cleco 24-1312N60 Rotary Vane Motor Model

More information

Parts Manual. cascade. corporation. Sideshifter. Model 100E-SSS-B203 R0. Serial Number

Parts Manual. cascade. corporation. Sideshifter. Model 100E-SSS-B203 R0. Serial Number c Parts Manual Model Serial Number Sideshifter 100E-SSS-B203 R0 corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234 OR Write:

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Electric Lowering & Raising System 20kg PRODUCT TYPE. Max. weight of light fitting Lowering distance. 4. Lamp circuits. No. of circuit No.

Electric Lowering & Raising System 20kg PRODUCT TYPE. Max. weight of light fitting Lowering distance. 4. Lamp circuits. No. of circuit No. Electric Lowering & Raising System The cost effective maintenance solution for luminaires FEATURES Designed for use of heavier weight light fittings. TYPICAL APPLICATIONS Workshops, Factories, Warehouses

More information

Slide Bearings Type E For Shaft Diameter Range mm Main Application Field Electric Machines

Slide Bearings Type E For Shaft Diameter Range mm Main Application Field Electric Machines Slide Bearings Type E For Shaft Diameter Range 160-315 mm Main Application Field Electric Machines End flange mounted slide bearing type EFWF with water-cooling and lubrication by a fixed oil ring RENK

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

DOUBLE OCTOMILL TM PRODUCT RANGE

DOUBLE OCTOMILL TM PRODUCT RANGE DOUBLE OCTOMILL TM PRODUCT RANGE Double Octomill insert selection and cutting data recommendations, see page 6. complete insert programme, see page 7. Tool angles: Jo = -11q Jp = - 8q Jf = - 8q Pitch

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Slide Bearings Type EM 9S For Shaft Diameters 80, 90, 100 mm Main Application Field Electric Machines

Slide Bearings Type EM 9S For Shaft Diameters 80, 90, 100 mm Main Application Field Electric Machines Slide Bearings Type EM 9S For Shaft Diameters 80, 90, 100 mm Main Application Field Electric Machines Centre flange mounted slide bearing type EM 9S The RENK EM 9S bearing is a fully self-contained, centre

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Accredited to ISO/IEC 17021-1:2015 to provide environmental 4th Floor Vivo Building 30 Stamford Street SE1 9LQ United Kingdom Contact: Mr

More information

Innovative Power Transmission. Slide Bearings Type E. Series EG Journal Range mm

Innovative Power Transmission. Slide Bearings Type E. Series EG Journal Range mm Innovative Power Transmission Slide Bearings Type E Series EG Journal Range 475-1250 mm RENK Slide Bearings Type E ➀ Type E ➁ Housing G smooth, foot-mounted ➂ Heat dissipation N Z X 5) W 5) U T natural

More information

Parts Manual. cascade. corporation. Bale Clamp. Model 40D-BCB-55A R0. Serial Number

Parts Manual. cascade. corporation. Bale Clamp. Model 40D-BCB-55A R0. Serial Number c Parts Manual Model Serial Number Bale Clamp 40D-BCB-A R0 corporation To Order Parts call: 888-227-2233, Fax: 888-329-0234 OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Internet: www.cascorp.com

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Espee Enterprises TURN KEY PROJECT FOR LUBRICANT BLENDING, GREASE, COOLANT & BRAKE FLUID PLANTS WASTE LUBE OIL REFINING

Espee Enterprises TURN KEY PROJECT FOR LUBRICANT BLENDING, GREASE, COOLANT & BRAKE FLUID PLANTS WASTE LUBE OIL REFINING Espee Enterprises TURN KEY PROJECT FOR LUBRICANT BLENDING, GREASE, COOLANT & BRAKE FLUID PLANTS WASTE LUBE OIL REFINING INTRODUCTION ESPEE ENTERPRISES are turnkey project consultants for Lubricating blending

More information

User Manual for the Eurovignette Portal. Booking Explanations

User Manual for the Eurovignette Portal. Booking Explanations User Manual for the Eurovignette Portal This is a user manual which will explain how to buy a Eurovignette in the Eurovignette portal. It is not intended to lay out or explain the legal requirements of

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Color marking device 1.178

Color marking device 1.178 device 1.178 Fig 1 Components of the color marking device Application The color marking device is used for automatically marking of the defects detected by nondestructive material testing. Type number

More information

Next Release: 14 November Next Release: 14 November July

Next Release: 14 November Next Release: 14 November July 43282 Next Release: 14 November 2018 Next Release: 14 November 2018 July Date of publication: 12 October 2018 TABLE OF CONTENTS Charts 1 Gross consumption of natural gas by OECD region 3 2 Indigenous production

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Parts Manual. cascade. Fork Positioner. Model 60E-HS-030. Serial Number

Parts Manual. cascade. Fork Positioner. Model 60E-HS-030. Serial Number c Parts Manual Model Serial Number Fork Positioner 60E-HS-030 For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234 OR Write: Cascade Corporation,

More information

SMX-F. Self-priming magnetic drive pumps. Chemically resistant self-priming magnetic drive pumps which can tolerate abnormal operation CFRETFE

SMX-F. Self-priming magnetic drive pumps. Chemically resistant self-priming magnetic drive pumps which can tolerate abnormal operation CFRETFE SMX-F series Self-priming magnetic drive pumps Chemically resistant self-priming magnetic drive pumps which can tolerate abnormal operation Self-priming magnetic drive pumps Main material CFRETFE The SMX-F

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model Serial Number Revolving Drum Clamp D-DFR-AR0 corporation To Order Parts call: 888--, Fax: 888-9-0 OR Write: Cascade Corporation, P.O. Box 08, Portland, OR 90 Internet: www.cascorp.com

More information

Parts Manual. cascade. corporation. 100F Sideshifter. Model 100F-SSS-B084 R1. Catalog Number

Parts Manual. cascade. corporation. 100F Sideshifter. Model 100F-SSS-B084 R1. Catalog Number c Parts Manual Model Catalog Number 100F Sideshifter 100F-SSS-B084 R1 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com All dealerships with an open

More information

ESS Batteries by Samsung SDI

ESS Batteries by Samsung SDI ESS Batteries by Samsung SDI Top Safety & Reliability Solutions Energy Storage System Business Division Headquarters Lithium-ion Korea 150-20 Gongse-ro, Giheung-gu, Yongin-city, Gyeonggi-do 17084, Korea

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Oil and Grease Pumps. Outstanding Performance and Reliability. The Industry s Most Trusted Pumps for:

Oil and Grease Pumps. Outstanding Performance and Reliability. The Industry s Most Trusted Pumps for: Oil and Grease Pumps Outstanding Performance and Reliability The Industry s Most Trusted Pumps for: Fast Lubes and Small Garages Oil Jobbers General Service Shops Dealerships Body Shops Municipalities

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Total credit to the non-financial sector (core debt), % of GDP Table F1.1

Total credit to the non-financial sector (core debt), % of GDP Table F1.1 Total credit to the non-financial sector (core debt), % of GDP Table F1.1 2012 2013 2014 2015 2016 Q2 16 Q3 16 Q4 16 Q1 17 Q2 17 Argentina 62.6 66.4 64.6 75.5 75.3 81.7 80.1 75.3 71.6 72.7 Australia 208.0

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Max. flow capacity of 5,000 L/min and max. discharge head of 98m. The world s largest class fluoroplastic magnetic drive pump.

Max. flow capacity of 5,000 L/min and max. discharge head of 98m. The world s largest class fluoroplastic magnetic drive pump. MDW series Magnetic drive pumps Max. flow capacity of 5,000 L/min and max. discharge head of 98m. The world s largest class fluoroplastic magnetic drive pump. The MDW series are the largest class fluoroplastic

More information