CONTINUED FROM PART- 1 INTRODUCTION

Size: px
Start display at page:

Download "CONTINUED FROM PART- 1 INTRODUCTION"

Transcription

1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in the Official Journal of The Patent Office. This Journal is being published on weekly basis on every Friday covering the various proceedings on Designs as required according to the provisions of under Rule 22, 25, 27 and 39 of the Design (Amendment) Rules, All the enquiries on this Official Journal and other information as required by the public should be addressed to the Controller General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that the content can be enriched

2 COPYRIGHT PUBLICATION SL NO CASE NUMBERS RENEWED ON

3 REGISTRATION OF DESIGNS The following designs have been registered. They are now open for public inspection. In the following each entry the Date of Registration is shown. The Priority Number, Priority Date and Priority Country are also shown DESIGN NUMBER CLASS )GURUNANAK WATCH CASES & HARDWARE 6, PATEL NAGAR, 80 FEET ROAD, ANAND MANGAL BUILDING, RAJKOT GUJARAT (INDIA) DATE OF REGISTRATION 18/07/2011 HANDLE DESIGN NUMBER CLASS )ELEGANZA JEWELLERY LTD. 102/103, SDF IV, S.E.E.P.Z., ANDHERI (E), MUMBAI , MAHARASHTRA, INDIA DATE OF REGISTRATION 15/03/2012 DIAMOND JEWELRY DESIGN NUMBER CLASS )CLASSIC CIGARETTE FILTERS 109, GAYA BUILDING, YUSUF MEHERALI ROAD, ROOM NO. 17, MUMBAI , MAHARASHTRA, INDIA DATE OF REGISTRATION 16/03/2012 CIGARETTE FILTERS 26631

4 DESIGN NUMBER CLASS )THE GILLETTE COMPANY IP/LEGAL PATENT DEPARTMENT - 3E, ONE GILLETTE PARK, BOSTON, 02127, USA DATE OF REGISTRATION 28/03/2012 SHAVING RAZOR NUMBER DATE COUNTRY 29/403, /09/2011 U.S.A. DESIGN NUMBER CLASS )(1) PARESHBHAI V. BHALIYA (2) CHANDRIKABEN P. BHALIYA (3) RAJESH O. KOTADIA (4) GHANSHYAM O. KOTADIA ALL INDIAN NATIONAL PARTNERS OF MARUTI METALS AN INDIAN PARTNERSHIP FIRM HAVING ITS PRINCIPAL PLACE OF BUSINESS AT SOMNATH ESTATE, SHOP NO. 3, NEAR DWARKADHISH ESTATE, VIRANI AGHAT, DHEBAR ROAD(SOUTH), RAJKOT-2, GUJARAT-INDIA DATE OF REGISTRATION 18/06/2012 HANDLE DESIGN NUMBER CLASS )EMERSON ELECTRIC CO., 8000 WEST FLORISSANT AVENUE, ST. LOUIS, MISSOURI 63136, UNITED OF AMERICA DATE OF REGISTRATION 26/09/2011 PIPE CUTTER 26632

5 DESIGN NUMBER CLASS )M/S. FNS INTERNATIONAL PVT. LTD., ITL TWIN TOWER, B-09, 313, 3RD FLOOR, NETAJI SUBHASH PALACE, PITAMPURA, DELHI (INDIA) DATE OF REGISTRATION 30/12/2011 KNIFE DESIGN NUMBER CLASS )BSH BOSCH UND SIEMENS HAUSGERÃ TE GMBH CARL-WERY - STR.34, 81739, MUNCHEN, GERMANY DATE OF REGISTRATION 01/03/2012 WASHING MACHINE NUMBER DATE COUNTRY /09/2011 OHIM DESIGN NUMBER CLASS )BSH BOSCH UND SIEMENS HAUSGERÃ TE GMBH CARL-WERY - STR.34, 81739, MUNCHEN, GERMANY DATE OF REGISTRATION 01/03/2012 DOOR OF WASHING DRYING MACHINES NUMBER DATE COUNTRY /09/2011 OHIM 26633

6 DESIGN NUMBER CLASS )BSH BOSCH UND SIEMENS HAUSGERÃ TE GMBH CARL-WERY - STR.34, 81739, MUNCHEN, GERMANY DATE OF REGISTRATION 01/03/2012 DOOR OF DRYING MACHINES NUMBER DATE COUNTRY /09/2011 OHIM DESIGN NUMBER CLASS )TAJ STEEL PRODUCTS DHURI ROAD, MALERKOTLA , PUNJAB, INDIA DATE OF REGISTRATION 05/03/2012 WALL PEG DESIGN NUMBER CLASS )NIFCO INC., A CORPORATION JAPANESE NATIONALITY, 184-1, MAIOKA-CHO, TOTSUKA-KU, YOKOHAMA-SHI, KANAGAWA , JAPAN DATE OF REGISTRATION 16/05/2012 HOLE PLUG NUMBER DATE COUNTRY /04/2012 JAPAN 26634

7 DESIGN NUMBER CLASS )YAZAKI CORPORATION 4-28, MITA 1-CHOME, MINATO-KU, TOKYO , JAPAN DATE OF REGISTRATION 06/01/2012 FUSIBLE LINK BLOCK NUMBER DATE COUNTRY /07/2011 JAPAN DESIGN NUMBER CLASS )M/S. AERO CLUB 867, JOSHI ROAD, KAROL BAGH, NEW DELHI DATE OF REGISTRATION 09/01/2012 FOOTWEAR DESIGN NUMBER CLASS )KONINKLIJKE PHILIPS ELECTRONICS N.V. GROENEWOUDSEWEG 1, 5621 B A, EINDHOVEN, THE NETHERLANDS DATE OF REGISTRATION 26/03/2012 LED MODULE NUMBER DATE COUNTRY 29/ /09/2011 U.S.A

8 DESIGN NUMBER CLASS )PRABHAKAR K. N. HAVING PLACE OF BUSINESS AT NO. 15, 6TH MAIN, NARAYANAGOWDA LAYOUT, TA AVEREKERE EXTENSION, BTM 1ST STAGE, BANGALORE AND NATIONALITY OF INDIAN DATE OF REGISTRATION 03/05/2012 INDUSTRIAL PUNCHING MACHINE DESIGN NUMBER CLASS )LA SEDA DE BARCELONA S.A. AVENIDA REMOLAR, 2, E EL PRAT DE LLOBREGAT, BARCELONA, SPAIN DATE OF REGISTRATION 15/02/2012 BOTTLE NUMBER DATE COUNTRY /08/2011 OHIM DESIGN NUMBER CLASS )BTICINO S.P.A., VIA MESSINA, MILANO ITALY DATE OF REGISTRATION 22/06/2010 COVER PLATE FOR ELECTRICAL APPAPRATUS NUMBER DATE COUNTRY /12/2009 OHIM 26636

9 DESIGN NUMBER CLASS )PREMIER PLASTIC INDUSTRIES 13/19, SHOP NO. 01, BASEMENT, GANPATI PLAZA, SARAASWATI MARG, KAROL BAGH, NEW DELHI , INDIA DATE OF REGISTRATION 16/03/2012 TRAY DESIGN NUMBER CLASS )ZOBELE ESPANA, S.A., SPAIN, ARGENTERS, 8-EDIF. 3-PARC TECNOLOGIC DEL VALLES, CERDANYOLA DEL VALLES (BARCELONA), SPAIN, DATE OF REGISTRATION 17/03/2011 VOLATILE SUBSTANCE EVAPORATORS NUMBER DATE COUNTRY /10/2010 OHIM DESIGN NUMBER CLASS )SMC KABUSHIKI KAISHA AKIHABARA UDX 15F, , SOTOKANDA, CHIYODA-KU, TOKYO , JAPAN DATE OF REGISTRATION 17/01/2012 FLUID PRESSURE CYLINDER NUMBER DATE COUNTRY /07/2011 JAPAN 26637

10 DESIGN NUMBER CLASS )SAVERGLASS 3 RUE DE LA GARE, FEUQUIERES, FRANCE DATE OF REGISTRATION 06/03/2012 BOTTLE NUMBER DATE COUNTRY /10/2011 OHIM DESIGN NUMBER CLASS )KAMLESHBHAI G. KORAT AN INDIAN NATIONAL SOLE PROPRIETOR OF K. B. INDUSTRIES AN INDIAN PROPRIETORSHIP FIRM HAVING ITS PRINCIPAL PLACE OF BUSINESS AT SHIVAM INDUSTIAL AREA, B/H. RIDHDHI-SIDHDHI SOCIETY, NEAR HARSODA FOUNDRY, NEAR SANTHIYA POOL, KOTHARIYA, RAJKOT, GUJARAT- INDIA DATE OF REGISTRATION 18/06/2012 HANDLE DESIGN NUMBER CLASS )ABB SCHWEIZ AG, OF BROWN BOVERI STRASSE 6, 5400 BADEN, SWITZERLAND DATE OF REGISTRATION 09/05/2012 CHARGING STATION NUMBER DATE COUNTRY DM/ /11/2011 WIPO 26638

11 DESIGN NUMBER CLASS )P. M. INDUSTRIES, PLOT NO 3239, GALI NO. 3, CHET SINGH NAGAR, LUDHIANA (PUNJAB) INDIA, AN INDIAN PROPRIETORSHIP FIRM WHOSE PROPRIETOR IS: PARVEEN GUPTA, BEING INDIAN NATIONALS OF THE ABOVE ADDRESS DATE OF REGISTRATION 15/05/2012 HYDRAULIC JACK DESIGN NUMBER CLASS )M/S DAMANI CONSTRUCTION COMPANY "BE-259, SECTOR-1, SALTLAKE, KOLKATA , WEST BENGAL, INDIA DATE OF REGISTRATION 28/12/2011 PROTECTIVE COVER DESIGN NUMBER CLASS )NAYASA HOMEWARE SURVEY NO. 367/16 & 378/2 KACHIGAM, NANI DAMAN, DAMAN , (UNION TERRITORIES) DAMAN UNION TERRITORIES, INDIA DATE OF REGISTRATION 05/03/2012 BOTTLE 26639

12 DESIGN NUMBER CLASS )KONINKLIJKE PHILIPS ELECTRONICS N.V. GROENEWOUDSEWEG 1, 5621 B A, EINDHOVEN, THE NETHERLANDS DATE OF REGISTRATION 26/03/2012 LED MODULE NUMBER DATE COUNTRY 29/ /09/2011 U.S.A. DESIGN NUMBER CLASS ) QUÃ BEC INC. 4521, RUE DES CAROUGES, NOTRE-DAME-DU-MONT-CARMEL, QUÃ BEC, G0X 3J0, CANADA DATE OF REGISTRATION 09/02/2012 FOUNDATION SCREW TO SUPPORT HOUSE WALLS DESIGN NUMBER CLASS )LA SEDA DE BARCELONA S.A. AVENIDA REMOLAR, 2, E EL PRAT DE LLOBREGAT, BARCELONA, SPAIN DATE OF REGISTRATION 15/02/2012 BOTTLES NUMBER DATE COUNTRY /08/2011 OHIM 26640

13 DESIGN NUMBER CLASS )S. HARIHARAN & S. S. VICHARE THADOMAL SHAHANI ENGINEERING COLLEGE, TPS-III, P.G. KHER MARG, OFF LINKING ROAD, BANDRA (W), MUMBAI-50 DATE OF REGISTRATION 19/07/2011 LOAD DISTRIBUTION MODEL FOR TEACHING PURPOSE (SET) DESIGN NUMBER CLASS )REXAM PHARMA PACKAGING INDIA PVT. LTD., #485, 13TH CROOS, 4TH PHASE, PEENYA INDUSTRIAL AREA, BANGALORE , KARNATAKA, INDIA DATE OF REGISTRATION 24/10/2011 NOZZLE DESIGN NUMBER CLASS )UMA PLASTICS LIMITED 14B CAMAC STREET, 3RD FLOOR, SUITE NO. 3D, KOLKATA , WEST BENGAL, INDIA DATE OF REGISTRATION 12/03/2012 CHAIR 26641

14 DESIGN NUMBER CLASS )ELEGANZA JEWELLERY LTD. 102/103, SDF IV, S.E.E.P.Z., ANDHERI (E), MUMBAI , MAHARASHTRA, INDIA DATE OF REGISTRATION 15/03/2012 DIAMOND JEWELRY DESIGN NUMBER CLASS )TOTO LTD., 1-1, NAKASHIMA 2-CHOME, KOKURAKITA-KU, KITAKYUSHU-SHI, FUKUOKA, , JAPAN DATE OF REGISTRATION 29/07/2011 FAUCET NUMBER DATE COUNTRY /01/2011 JAPAN DESIGN NUMBER CLASS )BRIDGESTONE CORPORATION 10-1, KYOBASHI 1-CHOME, CHUO-KU, TOKYO , JAPAN DATE OF REGISTRATION 17/01/2012 TIRE 26642

15 DESIGN NUMBER CLASS )VITRA PATENTE AG KLüNENFELDSTRASSE 22, CH-4132 MUTTENZ, SWITZERLAND DATE OF REGISTRATION 27/03/2012 BENCHE DESIGN NUMBER CLASS )THE GILLETTE COMPANY IP/LEGAL PATENT DEPARTMENT - 3E, ONE GILLETTE PARK, BOSTON, 02127, USA DATE OF REGISTRATION 28/03/2012 SHAVING RAZOR NUMBER DATE COUNTRY 29/403, /09/2011 U.S.A. DESIGN NUMBER CLASS )KAMLESHBHAI G. KORAT AN INDIAN NATIONAL SOLE PROPRIETOR OF K. B. INDUSTRIES AN INDIAN PROPRIETORSHIP FIRM HAVING ITS PRINCIPAL PLACE OF BUSINESS AT SHIVAM INDUSTIAL AREA, B/H. RIDHDHI-SIDHDHI SOCIETY, NEAR HARSODA FOUNDRY, NEAR SANTHIYA POOL, KOTHARIYA, RAJKOT, GUJARAT- INDIA DATE OF REGISTRATION 18/06/2012 HANDLE 26643

16 DESIGN NUMBER CLASS )EMERSON ELECTRIC CO., 8000 WEST FLORISSANT AVENUE, ST. LOUIS, MISSOURI 63136, UNITED OF AMERICA DATE OF REGISTRATION 26/09/2011 PIPE CUTTER DESIGN NUMBER CLASS )BSH BOSCH UND SIEMENS HAUSGERÃ TE GMBH CARL-WERY - STR.34, 81739, MUNCHEN, GERMANY DATE OF REGISTRATION 01/03/2012 DOOR OF WASHING MACHINES NUMBER DATE COUNTRY /09/2011 OHIM DESIGN NUMBER CLASS )LIFE LINE SECURITY & SYSTEM 20, FARISHTA COMPLEX, GE RD, RAIPUR , CHHATTISGARH, INDIA DATE OF REGISTRATION 05/03/2012 PORTABLE MOBILE SHIELD 26644

17 DESIGN NUMBER CLASS )YAZAKI CORPORATION 4-28, MITA 1-CHOME, MINATO-KU, TOKYO , JAPAN DATE OF REGISTRATION 06/01/2012 FUSIBLE LINK BLOCK NUMBER DATE COUNTRY /07/2011 JAPAN DESIGN NUMBER CLASS )KONINKLIJKE PHILIPS ELECTRONICS N.V. GROENEWOUDSEWEG 1, 5621 B A, EINDHOVEN, THE NETHERLANDS DATE OF REGISTRATION 26/03/2012 LED MODULE NUMBER DATE COUNTRY 29/ /09/2011 U.S.A. DESIGN NUMBER CLASS )THE PROCTER & GAMBLE COMPANY ONE PROCTER & GAMBLE PLAZA CINCINNATI, OHIO-45202, UNITED STATES OF AMERICA DATE OF REGISTRATION 15/04/2011 PACKAGE BOX NUMBER DATE COUNTRY 29/377, /10/2010 U.S.A

18 DESIGN NUMBER CLASS )LEGO A/S AASTVEJ 1, DK-7190 BILLUND, DENMARK DATE OF REGISTRATION 30/04/2012 BUILDING BLOCKS FROM TOY BUILDING SET NUMBER DATE COUNTRY /11/2011 OHIM DESIGN NUMBER CLASS )CHECKPOINT SYSTEMS INC MARKET STREET, 24TH FLOOR, PHILADELPHIA, PENNSYLVANIA , USA DATE OF REGISTRATION 13/03/2012 SECURITY DEVICE NUMBER DATE COUNTRY 29/401, /09/2011 U.S.A. DESIGN NUMBER CLASS )ELEGANZA JEWELLERY LTD. 102/103, SDF IV, S.E.E.P.Z., ANDHERI (E), MUMBAI , MAHARASHTRA, INDIA DATE OF REGISTRATION 15/03/2012 DIAMOND JEWELRY 26646

19 DESIGN NUMBER CLASS )SHARDA EXPORTS RITHANI INDUSTRIAL IND. AREA, DELHI ROAD, MEERUT (U.P.) DATE OF REGISTRATION 22/03/2012 CARPET DESIGN NUMBER CLASS )WYW BLOCK AG LANDSTRASSE 140, 9494 SCHAAN, LIECHTENSTEIN DATE OF REGISTRATION 23/03/2012 BUILDING BLOCK DESIGN NUMBER CLASS )NINGBO CHENWU HUMIDIFYING EQUIPMENT FACTORY 12 DONGYI ROAD, JIANGSHAN HI-TECH PARK, YINZHOU DISTRICT, NINGBO, ZHEJIANG , CHINA DATE OF REGISTRATION 28/03/2012 EVAPORATIVE AIR COOLER NUMBER DATE COUNTRY X 09/10/2011 CHINA 26647

20 DESIGN NUMBER CLASS )NOVARTIS AG LICHTSTRASSE BASEL SWITZERLAND DATE OF REGISTRATION 11/03/2011 INHALER WITH TRANSPARENT MOUTHPIECE COVER DESIGN NUMBER CLASS )1. SUAT O ZER, 2. ERSEN PESEN AND 3. CUKUROVA MAKINA IMALAT VE TICARET A. S., (NATIONALS OF TURKEY) HAVING OUR ADDRESS AT SAHIN MAH. SAIT POLAT BLV. NO. 326 TARSUS/MERSIN, TURKEY DATE OF REGISTRATION 14/05/2012 BACKHOE LOADER DESIGN NUMBER CLASS )M/S. FNS INTERNATIONAL PVT. LTD., ITL TWIN TOWER, B-09, 313, 3RD FLOOR, NETAJI SUBHASH PALACE, PITAMPURA, DELHI (INDIA) DATE OF REGISTRATION 30/12/2011 FORK 26648

21 DESIGN NUMBER CLASS )NAYASA HOMEWARE SURVEY NO. 367/16 & 378/2 KACHIGAM, NANI DAMAN, DAMAN , (UNION TERRITORIES) DAMAN UNION TERRITORIES, INDIA DATE OF REGISTRATION 05/03/2012 TIFFIN BOX DESIGN NUMBER CLASS )M/S. ANAND AGENCY 4, NAYAPURA INDORE, M.P., INDIA DATE OF REGISTRATION 07/03/2012 DOYPACK DESIGN NUMBER CLASS )TATA TECHNOLOGIES PTE LIMITED 8, SHENTON WAY, #19-05 AXA TOWER, SINGAPORE DATE OF REGISTRATION 09/01/2012 CAR 26649

22 DESIGN NUMBER CLASS )IAN J. BAKER 619 VILLAGE BOULEVARD S., BALDWINSVILLE, NEW YORK 13027, USA DATE OF REGISTRATION 10/02/2012 COAXIAL CABLE CONNECTOR NUMBER DATE COUNTRY 29/399, /08/2011 U.S.A. DESIGN NUMBER CLASS )PREETHI KITCHEN APPLIANCES PRIVATE LIMITED TECHNPOLIS KNOWLEDGE PARK, MAHAKALI CAVE, ROAD, CHAKALA, ANDHERI-EAST, MUMBAI , INDIA DATE OF REGISTRATION 09/09/2011 MIXER GRINDER DESIGN NUMBER CLASS )SAJJAN SINGH VIRK S/O SARDAR GURDEV SINGH, 2521, PHASE XI, MOHALI , PUNJAB, INDIA DATE OF REGISTRATION 12/03/2012 MOTORCYCLE 26650

23 DESIGN NUMBER CLASS )SMA SOLAR TECHNOLOGY AG SONNENALLEE 1, NIESTETAL, GERMANY DATE OF REGISTRATION 14/03/2012 GRAPHIC DISPLAY DEVICE WITH STAND NUMBER DATE COUNTRY /09/2011 OHIM DESIGN NUMBER CLASS )TATA GLOBAL BEVERGES LIMITED 1, BISHOP LEFROY ROAD, KOLKATA , WEST BENGAL, INDIA DATE OF REGISTRATION 13/06/2011 SINGLE SERVE POD DESIGN NUMBER CLASS )TATA JOHNSON CONTROLS AUTOMOTIVE LTD., PLOT NO. 1, SURVEY NO. 235 & 245, HINJEWADI, TALUKA MULSHI, PUNE MAHARSHTRA, INDIA DATE OF REGISTRATION 22/07/2011 CAR SEAT 26651

24 DESIGN NUMBER CLASS )SOCIETE DE TECHNOLOGIE MICHELIN 23, RUE BRESCHET, FR-63000, CLERMONT-FERRAND, FRANCE DATE OF REGISTRATION 22/03/2012 TYRE NUMBER DATE COUNTRY 11/ /09/2011 FRANCE DESIGN NUMBER CLASS )FREEMANÂ S MEASURES PRIVATE LIMITED G. T. ROAD, JUGIANA, LUDHIANA , PUNJAB, INDIA DATE OF REGISTRATION 26/03/2012 PACKAGING FOR MEASURING TAPE DESIGN NUMBER CLASS )ATLAS PLASTIC 22, MADHURAM COMPLEX, SUBHASHBRIDGE, AHMEDABAD , GUJARAT, INDIA DATE OF REGISTRATION 27/02/2012 SEAL 26652

25 DESIGN NUMBER CLASS )1. SUAT O ZER, 2. ERSEN PESEN AND 3. CUKUROVA MAKINA IMALAT VE TICARET A. S., (NATIONALS OF TURKEY) HAVING OUR ADDRESS AT SAHIN MAH. SAIT POLAT BLV. NO. 326 TARSUS/MERSIN, TURKEY DATE OF REGISTRATION 14/05/2012 LOADER ARM DESIGN NUMBER CLASS )NAYASA HOMEWARE SURVEY NO. 367/16 & 378/2 KACHIGAM, NANI DAMAN, DAMAN , (UNION TERRITORIES) DAMAN UNION TERRITORIES, INDIA DATE OF REGISTRATION 05/03/2012 BOTTLE DESIGN NUMBER CLASS )M/S. AERO CLUB 867, JOSHI ROAD, KAROL BAGH, NEW DELHI DATE OF REGISTRATION 09/01/2012 FOOTWEAR 26653

26 DESIGN NUMBER CLASS )LA SEDA DE BARCELONA S.A. AVENIDA REMOLAR, 2, E EL PRAT DE LLOBREGAT, BARCELONA, SPAIN DATE OF REGISTRATION 15/02/2012 BOTTLE NUMBER DATE COUNTRY /08/2011 OHIM DESIGN NUMBER CLASS )PADMAKAR RAMCHANDRA POKALE M-13/426, MAHARASHTRA HOUSING BOARD COLONY, LAXMINAGAR, PARVATI, PUNE , INDIA DATE OF REGISTRATION 13/09/2011 FINENESS MEASURING APPARATUS FOR POWDERY MATERIAL DESIGN NUMBER CLASS )GODREJ & BOYCE MFG. CO. LTD., PIROJSHANAGAR, VIKHROLI, MUMBAI , MAHARASHTRA, INDIA DATE OF REGISTRATION 17/10/2011 CABINET FOR MEDIA UNITS 26654

27 DESIGN NUMBER CLASS )KONINKLIJKE PHILIPS ELECTRONICS N.V. GROENEWOUDSEWEG 1, 5621 B A, EINDHOVEN, THE NETHERLANDS DATE OF REGISTRATION 09/03/2012 AIR PURIFIER NUMBER DATE COUNTRY /09/2011 OHIM DESIGN NUMBER CLASS )SHRAMIK NAARI SANGH 202, OJAS BUILDING, SAROJINI NAIDU ROAD, MULUND(WEST), MUMBAI , MAHARASHTRA, INDIA DATE OF REGISTRATION 13/03/2012 CHOCOLATE SERVING PACKAGE DESIGN NUMBER CLASS )ELEGANZA JEWELLERY LTD. 102/103, SDF IV, S.E.E.P.Z., ANDHERI (E), MUMBAI , MAHARASHTRA, INDIA DATE OF REGISTRATION 15/03/2012 DIAMOND JEWELRY 26655

28 DESIGN NUMBER CLASS )(1) MAYURBHAI RADADIYA (2) BHAVESHBHAI RAKHOLIYA BOTH INDIAN NATIONAL PARTNERS OF PLANET ENTERPRISE AN INDIAN PARTNERSHIP FIRM HAVING ITS PRINCIPAL PLACE OF BUSINESS AT 4 - PARSANA SOCIETY, NEAR 50 FEET MAIN ROAD, OPP. 73 NO. SCHOOL, PATEL NAGAR RAJKOT, GUJARAT - INDIA DATE OF REGISTRATION 01/06/2012 HANDLE DESIGN NUMBER CLASS )M/S. HET INDUSTRIES 116, 117-ANJANI INDUSTRIAL ESTATE PART-3, NR. GOTHAN NAHAR, AAMROLI-SAYAN ROAD, TA-OLPAD, DIS-SURAT, STATE- GUJARAT, INDIA DATE OF REGISTRATION 21/03/2012 LAMP HOLDER DESIGN NUMBER CLASS )SYNDICATE HANDICRAFTS H-NO , CHOUK KHILWATH, CHARMINAR, HYDERABAD , ANDHRA PRADESH, INDIA DATE OF REGISTRATION 27/03/2012 CIGAR HOLDER 26656

29 DESIGN NUMBER CLASS )CUKUROVA MAKINA IMALAT VE TICARE A.S., SAHIN MAIN, SAIT POLAT BLV. NO. 326 TARSUS/MERSIN TURKEY (TURKEY NATIONAL) DATE OF REGISTRATION 14/12/2011 BACKHOE LOADER CABIN DESIGN NUMBER CLASS )SMT. LATESH PANCHOLI H-344, EPIP SITAPUR INDUSTRIAL AREA, JAIPUR , RAJASTHAN, INDIA DATE OF REGISTRATION 29/02/2012 CARPET DESIGN NUMBER CLASS )M/S. FNS INTERNATIONAL PVT. LTD., ITL TWIN TOWER, B-09, 313, 3RD FLOOR, NETAJI SUBHASH PALACE, PITAMPURA, DELHI (INDIA) DATE OF REGISTRATION 30/12/2011 KNIFE 26657

30 DESIGN NUMBER CLASS )SABAF S.P.A. VIA DEI CARPINI, 1, I OSPITALETTO (BS), ITALY DATE OF REGISTRATION 05/03/2012 FLAME SPREADER DESIGN NUMBER CLASS )LUZMON UK LIMITED C/O SHELLEY STOCK HUTTER LLP, 7-10 CHANDOS STREET, LONDON W1G 9DQ, UNITED KINGDOM DATE OF REGISTRATION 09/04/2012 CONTROL UNIT FOR THERAPEUTIC PAD NUMBER DATE COUNTRY /10/2011 EUROPEAN UNION DESIGN NUMBER CLASS )INDIAN INSTITUTE OF TECHNOLOGY DELHI, AN INDIAN INSTITUTE, OF HAUZ KHAS, NEW DELHI , INDIA DATE OF REGISTRATION 01/05/2012 ORTHOSIS FOR CLUB-FOOT 26658

31 DESIGN NUMBER CLASS )SMA SOLAR TECHNOLOGY AG SONNENALLEE 1, NIESTETAL, GERMANY DATE OF REGISTRATION 14/03/2012 INVERTER NUMBER DATE COUNTRY /09/2011 OHIM DESIGN NUMBER CLASS )ELEGANZA JEWELLERY LTD. 102/103, SDF IV, S.E.E.P.Z., ANDHERI (E), MUMBAI , MAHARASHTRA, INDIA DATE OF REGISTRATION 15/03/2012 DIAMOND JEWELRY DESIGN NUMBER CLASS )BECTON, DICKINSON AND COMPANY 1 BECTON DRIVE, FRANKLIN LAKES, NEW JERSEY 07417, THE UNITED STATES OF AMERICA DATE OF REGISTRATION 07/09/2009 COLLECTION CONTAINER NUMBER DATE COUNTRY 12/398, /03/2009 U.S.A

32 DESIGN NUMBER CLASS )M/S. NUZEN HERBAL PRIVATE LIMITED PLOT NO.1343, ROAD NO.67, JUBLIEE HILLS, HYDERABAD , ANDHRA PRADESH, INDIA DATE OF REGISTRATION 02/09/2011 CAP DESIGN NUMBER CLASS )A.N. POLYMERS PVT LTD., A-54, NARAINA INDUSTRIAL AREA, PHASE-1, NEW DELHI A-54, NARAINA INDUSTRIAL AREA, PHASE-1, NEW DELHI DATE OF REGISTRATION 29/12/2011 WATER PURIFIER DESIGN NUMBER CLASS )M/S. FNS INTERNATIONAL PVT. LTD., ITL TWIN TOWER, B-09, 313, 3RD FLOOR, NETAJI SUBHASH PALACE, PITAMPURA, DELHI (INDIA) DATE OF REGISTRATION 30/12/2011 FORK 26660

33 DESIGN NUMBER CLASS )BSH BOSCH UND SIEMENS HAUSGERÃ TE GMBH CARL-WERY - STR.34, 81739, MUNCHEN, GERMANY DATE OF REGISTRATION 01/03/2012 DRYING MACHINE NUMBER DATE COUNTRY /09/2011 OHIM DESIGN NUMBER CLASS )FOLEY DESIGNS PVT. LTD. MIMS SIGNATURE BUILDING, #20, COLES ROAD, FRAZER TOWN, BANGALORE , KARNATAKA, INDIA DATE OF REGISTRATION 07/03/2012 SOLAR LIGHTING FIXTURE DESIGN NUMBER CLASS )M/S. FNS INTERNATIONAL PVT. LTD., ITL TWIN TOWER, B-09, 313, 3RD FLOOR, NETAJI SUBHASH PALACE, PITAMPURA, DELHI (INDIA) DATE OF REGISTRATION 30/12/2011 FORK 26661

34 DESIGN NUMBER CLASS )QUALIMARK MACHINES PVT. LTD. 53, GIDC, NARMADA NAGAR, BHARUCH , GUJARAT-INDIA DATE OF REGISTRATION 04/01/2012 MACHINE FOR PREPARING VEGETABLE FOOD DESIGN NUMBER CLASS )CENTRE FOR DEVELOPMENT OF TELEMATICS (C-DOT) ELECTRONICS CITY PHASE - 1, HOSUR ROAD, BANGALORE , KARNATAKA, INDIA DATE OF REGISTRATION 09/02/2012 TELEPHONE DESIGN NUMBER CLASS )BIBA APPARELS PVT. LTD. RELIABLE HOUSE, SITUATED AT HANUMAN SILK MILL COMPOUND, KANJURMARG (WEST), OPP. HUMA MALL, MUMBAI , MAHARASHTRA, INDIA DATE OF REGISTRATION 30/04/2012 TEXTILE FABRIC 26662

35 DESIGN NUMBER CLASS )LIBERTY SHOES LIMITED LIBERTY PURAM, 13, MILESTONE, GT KARNAL ROAD, KUTAIL, DT-KARNAL , HARYANA, INDIA DATE OF REGISTRATION 07/12/2011 FOOTWEAR DESIGN NUMBER CLASS )ASIA MOTORWORKS LIMITED 7TH FLOOR, TOWER 1, EQUINOX BUSINESS PARK, (PENINSULA- TECHNO PARK), OFF BANDRA-KURLA COMPLEX, L.B.S. MARG, MUMBAI , MAHARASHTRA, INDIA DATE OF REGISTRATION 15/02/2012 HEAVY COMMERCIAL VEHICLE DESIGN NUMBER CLASS )MR. MIKHAIL LYUBACHEV SUVOROVSKY PROSP , SAINT PETERSBURG, , RUSSIAN FEDERATION DATE OF REGISTRATION 17/02/2012 MOBILE SPEAKER UNIT NUMBER DATE COUNTRY 29/399, /08/2011 U.S.A

36 DESIGN NUMBER CLASS )WOLFGANG-PETER GELLER SIEMS TWIETEN 4, GARLSDORF AM WALDE GERMANY DATE OF REGISTRATION 20/10/2011 MOUNTING POLE FOR CAMERA NUMBER DATE COUNTRY DE /04/2011 GERMANY DESIGN NUMBER CLASS )STUDDS ACCESSORIES LTD. 23/7, MATHURA ROAD, BALLABGARH, FARIDABAD, HARYANA , INDIA DATE OF REGISTRATION 13/03/2012 HELMET DESIGN NUMBER CLASS )ELEGANZA JEWELLERY LTD. 102/103, SDF IV, S.E.E.P.Z., ANDHERI (E), MUMBAI , MAHARASHTRA, INDIA DATE OF REGISTRATION 15/03/2012 DIAMOND JEWELRY 26664

37 DESIGN NUMBER CLASS )DENSO SUBROS THERMAL ENGINEERING CENTRE INDIA LIMITED C-51, PHASE-II, NOIDA , U.P., INDIA DATE OF REGISTRATION 16/03/2012 ENGINE COLLING MODULE DESIGN NUMBER CLASS )KONINKLIJKE PHILIPS ELECTRONICS N.V. GROENEWOUDSEWEG 1, 5621 B A, EINDHOVEN, THE NETHERLANDS DATE OF REGISTRATION 16/01/2012 DRINKING CUP NUMBER DATE COUNTRY /07/2011 OHIM DESIGN NUMBER CLASS )JAYESHBHAI L. SANGANI AN INDIAN NATIONAL SOLE PROPRIETOR OF SHREE HARIKRUPA MANUFACTURES AN INDIAN PROPRIETORSHIP FIRM HAVING ITS PRINCIPAL PLACE OF BUSINESS AT K-1, 242/ 13, Q-ROAD, STREET NO. Q2, AJI G.I.D.C., B/H. MELTECH, RAJKOT, GUJARAT - INDIA DATE OF REGISTRATION 11/05/2012 TOOL FOR DIE-CASTING MACHINERY 26665

38 DESIGN NUMBER CLASS )M/S. FNS INTERNATIONAL PVT. LTD., TWIN TOWER, B-09, 313, 3RD FLOOR, NETAJI SUBHASH PALACE, PITAMPURA, DELHI, INDIA DATE OF REGISTRATION 30/12/2011 CUTLERY STAND DESIGN NUMBER CLASS )M/S. FNS INTERNATIONAL PVT. LTD., ITL TWIN TOWER, B-09, 313, 3RD FLOOR, NETAJI SUBHASH PALACE, PITAMPURA, DELHI (INDIA) DATE OF REGISTRATION 30/12/2011 KNIFE DESIGN NUMBER CLASS )BSH BOSCH UND SIEMENS HAUSGERÃ TE GMBH CARL-WERY - STR.34, 81739, MUNCHEN, GERMANY DATE OF REGISTRATION 01/03/2012 WASHING MACHINE NUMBER DATE COUNTRY /09/2011 OHIM 26666

39 DESIGN NUMBER CLASS )BSH BOSCH UND SIEMENS HAUSGERÃ TE GMBH CARL-WERY - STR.34, 81739, MUNCHEN, GERMANY DATE OF REGISTRATION 01/03/2012 DOOR OF DRYING MACHINE NUMBER DATE COUNTRY /09/2011 OHIM DESIGN NUMBER CLASS )M/S. SAFAR INDUSTRIES PLOT NO. 1, PATEL INDUSTRIAL AREA, BEHIND RIDDHI SIDDHI SOCIETY, NEAR OVER BRIDGE, GONDAL CHOWKDI, BELOW DANDIA PUL, RAJKOT, GUJARAT, INDIA DATE OF REGISTRATION 06/03/2012 HANDLE DESIGN NUMBER CLASS )HONDA MOTOR CO., LTD., A JAPANESE CORPORATION, OF 1-1, MINAMI-AOYAMA 2-CHOME, MINATO-KU, TOKYO, JAPAN DATE OF REGISTRATION 03/05/2012 MOTOR SCOOTER NUMBER DATE COUNTRY /11/2011 JAPAN 26667

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 2

CONTINUED FROM PART 2 CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 2

CONTINUED FROM PART 2 CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 3 INTRODUCTION

CONTINUED FROM PART- 3 INTRODUCTION CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Kare Zindagi Instant Start

Kare Zindagi Instant Start Kare Zindagi Instant Start KIND ATTENTION t In event of any particular model being phased out or out of stock, the Company reserves the right to provide another equivalent model of same capacity best

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 3 INTRODUCTION

CONTINUED FROM PART- 3 INTRODUCTION CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

AUTHORITY FOR ADVANCE RULINGS (INCOME TAX)

AUTHORITY FOR ADVANCE RULINGS (INCOME TAX) DATE: 26.12.2016 (Monday) 1 AAR/971/2010 LG Electronics India Pvt. Ltd.,Greater Noida (UP) S245R(2) CIT (IT), Noida 2 AAR/1064/2011 The Goodyear Tire & Rubber Company, USA S245R(2) CIT(IT) - 2, ND 3 AAR/1214/2011

More information

CONTINUED FROM PART- 1 INTRODUCTION. Journal of The Patent Office. This Journal is being published on weekly basis on every Friday

CONTINUED FROM PART- 1 INTRODUCTION. Journal of The Patent Office. This Journal is being published on weekly basis on every Friday CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

One machine multiple applications.

One machine multiple applications. One machine multiple applications. image 1 image 2 image 3 image 4 Manufacturing of engineering plastics. Processing of PVC. Manufacturing of TPE. Manufacturing of master batches. Coperion worldwide. >

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 3

CONTINUED FROM PART 3 CONTINUED FROM PART 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Solar PV systems Roof Tops, Ground Mounted & Floating Platform, Grid Tied & Standalone. Solar PV Rooftop 140 kwp at BCP Mumbai

Solar PV systems Roof Tops, Ground Mounted & Floating Platform, Grid Tied & Standalone. Solar PV Rooftop 140 kwp at BCP Mumbai Solar PV systems Roof Tops, Ground Mounted & Floating Platform, Grid Tied & Standalone Solar PV Rooftop 140 kwp at BCP Mumbai 22.08.2017 AUTONIC at a glance Autonic Energy Systems Pvt. Ltd. was incorporated

More information

Maximum retail price list. For SIBCO range of bearing housings and accessories Bearing housings, sleeves, locknuts, lock washers and locating rings

Maximum retail price list. For SIBCO range of bearing housings and accessories Bearing housings, sleeves, locknuts, lock washers and locating rings Maximum retail price list For SIBCO range of bearing housings and accessories Bearing housings, sleeves, locknuts, lock washers and locating rings Effective from 1 st April, 2017 Engineered for optimized

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

corteco a WiDE range of SErvicES tailored to customer needs.

corteco a WiDE range of SErvicES tailored to customer needs. corteco a WiDE range of SErvicES tailored to customer needs. CustoMEr-oriEntEd MarkEting global presence, CLosE proximity Continuous range development Integrated quality and technical department for each

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

SOLAR PLANT PERFORMANCE IN INDIA

SOLAR PLANT PERFORMANCE IN INDIA Now Available SOLAR PLANT PERFORMANCE IN INDIA 2017-18 Report (PDF) Data-set (Excel) India Infrastructure Research SOLAR PLANT PERFORMANCE IN INDIA 2017-18 Table of Contents 1. Solar Power Sector Overview

More information

VACUUM PUMP. Material of Construction: Applications:

VACUUM PUMP. Material of Construction: Applications: VACUUM PUMP Material of Construction: (as applicable) Rotor(Impeller) Applications: Priming of large pumps Evacuation of air from suction pipes and chambers Specific Applications: Twist drilling machine,

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

European Patent Office Annual Report 2017 Country profile: Netherlands

European Patent Office Annual Report 2017 Country profile: Netherlands European Patent Office Annual Report 207 Country profile: Netherlands Contact: press@epo.org www.epo.org/media Date of publication: 7 March 208 Growth of European patent applications global 48 027 52 703

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Labor Productivity, Compensation Costs, and U.S. International Competitiveness

Labor Productivity, Compensation Costs, and U.S. International Competitiveness Cornell University ILR School DigitalCommons@ILR Federal Publications Key Workplace Documents June 1993 Labor Productivity, Compensation Costs, and U.S. International Competitiveness U.S. Bureau of Labor

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

High Accuracy Wire Electrical Discharge Machines

High Accuracy Wire Electrical Discharge Machines Equipment and Construction Work for Machine Installation 1. Floor area and foundation work 4. Electrical work W32FB W53FB 2. Factory air-conditioning equipment Recommended optimal temperature 20 1 Heat

More information

CONTINUED FROM PART- 3 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 3 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Aluminum Profile Collection Frame Edge Handle

Aluminum Profile Collection Frame Edge Handle German quality you can trust Delhi Office: Hettich India Private Limited 302, Durolite House, Opp. B TV, New Link Road, Andheri (West), Mumbai - 400 053 Phone: +91 22 2674 3289/3356/49 Fax: +91 22 2674

More information

SIPRO TECH. A-502,Yasho Narayana Building, Near Panvel Railway Station, Old Panvel, NaviMumbai Ph.no: / ,

SIPRO TECH. A-502,Yasho Narayana Building, Near Panvel Railway Station, Old Panvel, NaviMumbai Ph.no: / , Sipro Tech is established in Jan 2008. COMPANY PROFILE The firm is mainly engaged in carrying out all type of Engineering Design works such as detail Engineering of Electrical Systems & Control Panels

More information

CONTINUED FROM PART 2

CONTINUED FROM PART 2 CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

BTS Fair of Shoes, Leather & Leather Goods in Poznan, Poland- August 29th to 31st A Report by Dr. Debasis De, Asst.

BTS Fair of Shoes, Leather & Leather Goods in Poznan, Poland- August 29th to 31st A Report by Dr. Debasis De, Asst. BTS Fair of Shoes, Leather & Leather Goods in Poznan, Poland- August 29th to 31st 2016. A Report by Dr. Debasis De, Asst. Director, CLE-ER Poland (Republic of Poland) is one of the countries in Central

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Solar Energy Corporation of India New Delhi-17

Solar Energy Corporation of India New Delhi-17 Solar Energy Corporation of India New Delhi-7 : SECI/Cont./SRT-IV-P/7/0/ Date: 6-07-0 Subject: tification of L bidders of different States in Part-A and for price matching by L, L,L.and so on..0 The Request

More information

Siddhi Vinayak. Engineers

Siddhi Vinayak. Engineers Siddhi Vinayak Engineers nd Office: Shop No. 9, Plot No. 146/2, II Phase, GIDC, Vapi -396195 Contact : Mr. Pratik Patel Mob. : +91 99984 72806 E-mail: siddhivinayakengineer@yahoo.com NBC Bearing National

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Pioneer P750/49. The Premium 750 KW Wind Turbine. green. pioneer. go go with

Pioneer P750/49. The Premium 750 KW Wind Turbine. green. pioneer. go go with Pioneer P750/49 The Premium 750 KW Wind Turbine green go go with pioneer Transforming the Power of Wind Corporate Profile Pioneer Wincon Private Limited (PWPL) is a member company of the Pioneer Asia Group

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

The Present and the Future of the Stainless Steel Market in India. Ramesh R. Gopal General Manager Nickel Institute Executive Director I S S D A

The Present and the Future of the Stainless Steel Market in India. Ramesh R. Gopal General Manager Nickel Institute Executive Director I S S D A The Present and the Future of the Stainless Steel Market in India Ramesh R. Gopal General Manager Nickel Institute Executive Director I S S D A This Picture Says it All! India s end-use break-up (2007-08)

More information

AUSTRIA. Table 1. FDI flows in the host economy, by geographical origin. (Millions of US dollars)

AUSTRIA. Table 1. FDI flows in the host economy, by geographical origin. (Millions of US dollars) Table 1. FDI flows in the host economy, by geographical origin World 5 690 138 6 195 3 184 10 784 7 933 31 154 6 858 9 303 840 10 618 5 760 Developed economies 5 740 13 5 341 2 689 10 137 6 291 29 721

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Catalog. Low voltage General performance IE3 efficiency cast iron motors

Catalog. Low voltage General performance IE3 efficiency cast iron motors Catalog Low voltage General performance IE3 efficiency cast iron motors ABB Motors and Generators I Low voltage general performance IE3 efficiency motors 2 General performance IE3 efficiency cast iron

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

HT, LT U.G. cables & PVC insulated Al wire

HT, LT U.G. cables & PVC insulated Al wire HT, LT U.G. cables & PVC insulated Al wire Sl.No Name of the firm s particulars Valid upto 1 M/s. Gloster s Ltd., Kallakal(Vi), Toopran(MN), Medak district, Andra Pradesh ( Ph No: 91-80-2372 2274,2837

More information

CONTINUED FROM PART- 2 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 2 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

MOTOR COMPONENTS LAMINATIONS, STACKS, WOUND STATORS AND DIE-CAST ROTORS

MOTOR COMPONENTS LAMINATIONS, STACKS, WOUND STATORS AND DIE-CAST ROTORS MOTOR COMPONENTS LAMINATIONS, STACKS, WOUND STATORS AND DIE-CAST ROTORS www.lawkimindia.com www.godrej.com LAWKIM MOTORS GROUP Lawkim is a part of USD 4.5 billion Godrej Group. Established in 1961, Lawkim

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Table 6.15: Horse power-wise models of tractors and power tillers available in India (as on March 2016)

Table 6.15: Horse power-wise models of tractors and power tillers available in India (as on March 2016) Table 6.15: Horse power-wise models of tractors and power tillers available in India (as on March 2016) S.No. Tractor company / model 1.0 New Holland Tractors, Gautam Budh Nagar, Uttar Pradesh 1.1 Tractor

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

DRX. MCCBs for residential and commercial SYSTEMS FOR ELECTRICAL INSTALLATIONS & INFORMATION NETWORKS.

DRX. MCCBs for residential and commercial SYSTEMS FOR ELECTRICAL INSTALLATIONS & INFORMATION NETWORKS. DRX MCCBs for residential and commercial SYSTEMS FOR ELECTRICAL INSTALLATIONS & INFORMATION NETWORKS www.legrand.co.in Combining forces to provide power and protection With offers in more than 160 countries,

More information

Manual changeover switches & Automatic transfer switches

Manual changeover switches & Automatic transfer switches Manual changeover switches & Automatic transfer switches Manual ChangeoverSwitches 63A to 1600A Advantagesforyou: Doublebreakperpolefacilitalingsuitabilityforisolationasper IEC60947-3 Safeisolationat0positionformaintenance

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Summary of physical Stocks as on 17/04/2014

Summary of physical Stocks as on 17/04/2014 Statement of Gold as on 17/4/214 Summary of physical s as on 17/4/214 on (in gram) Balance () grams) () 1 Ahmedabad 1 52 14 156 1 213 246 459 5 1 85 381 466 1 47 116 163 3 Hyderabad 5 1 1 4 5 Jaipur Kolkata

More information

Export Oriented Enterprises (EOE) 1st Quarter Introduction This issue of Economic and Social Indicators (ESI) presents the results of the

Export Oriented Enterprises (EOE) 1st Quarter Introduction This issue of Economic and Social Indicators (ESI) presents the results of the Export Oriented Enterprises (EOE) 1st Quarter 2018 1. Introduction This issue of Economic and Social Indicators (ESI) presents the results of the Quarterly Survey of Employment among Export Oriented Enterprises

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Export Oriented Enterprises (EOE) 3 rd Quarter Introduction This issue of Economic and Social Indicators (ESI) presents the results of the

Export Oriented Enterprises (EOE) 3 rd Quarter Introduction This issue of Economic and Social Indicators (ESI) presents the results of the Export Oriented Enterprises (EOE) 3 rd Quarter 2017 1. Introduction This issue of Economic and Social Indicators (ESI) presents the results of the Quarterly Survey of Employment among Export Oriented Enterprises

More information

4CKNYC[A2 A2 AKPFGZ GRU AXLE RAIL / 02

4CKNYC[A2 A2 AKPFGZ GRU AXLE RAIL / 02 P641G RAILWAY INDEX Mitsubishi Materials is constantly engaging ultra modern technologies in the research and development of cutting tools. Results of the research provide solutions for the ever increasing

More information

INDIA S LEADING ROOFTOP SOLAR SOLUTIONS PROVIDER 1GW ANNUAL MODULE PRODUCTION CAPACITY

INDIA S LEADING ROOFTOP SOLAR SOLUTIONS PROVIDER 1GW ANNUAL MODULE PRODUCTION CAPACITY INDIA S LEADING ROOFTOP SOLAR SOLUTIONS PROVIDER 1GW ANNUAL MODULE PRODUCTION CAPACITY VIKRAM SOLAR WHO WE ARE Vikram Solar is a globally recognised solar energy solutions provider, specialising in high

More information

INDIA S LEADING ROOFTOP SOLAR SOLUTIONS PROVIDER 1GW ANNUAL MODULE PRODUCTION CAPACITY

INDIA S LEADING ROOFTOP SOLAR SOLUTIONS PROVIDER 1GW ANNUAL MODULE PRODUCTION CAPACITY INDIA S LEADING ROOFTOP SOLAR SOLUTIONS PROVIDER 1GW ANNUAL MODULE PRODUCTION CAPACITY VIKRAM SOLAR WHO WE ARE Vikram Solar is a globally recognised reliable solar energy solutions provider, specialising

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Export Oriented Enterprises (EOE) 2nd Quarter 2018

Export Oriented Enterprises (EOE) 2nd Quarter 2018 Export Oriented Enterprises (EOE) 2nd Quarter 2018 1. Introduction This issue of Economic and Social Indicators (ESI) presents the results of the Quarterly Survey of Employment among Export Oriented Enterprises

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

ELECON. Range of Products for Plastic Industry. w w w. e l e c o n. c o m. Catalogue No.: 217/EECL/PROFILE/01/15

ELECON. Range of Products for Plastic Industry. w w w. e l e c o n. c o m. Catalogue No.: 217/EECL/PROFILE/01/15 ELECON Range of Products for Plastic Industry Catalogue No.: 217/EECL/PROFILE/01/15 w w w. e l e c o n. c o m Introduction Elecon, India s largest manufacturer of Industrial Gears Founded in 1951, over

More information

Power Sector Trends: Focus on States

Power Sector Trends: Focus on States Power Sector Trends: Focus on States Japan-India Climate Policy Research Workshop December 2017 Dr. Kartikeya Singh Deputy Director and Fellow Wadhwani Chair in U.S.-India Policy Studies CSIS ksingh@csis.org

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Information Technology and Economic Development: An Introduction to the Research Issues

Information Technology and Economic Development: An Introduction to the Research Issues November 1998 Working Papers No. 153 Information Technology and Economic Development: An Introduction to the Research Issues TABLE 1 WORLD-WIDE INFORMATION TECHNOLOGY MARKET BREAKDOWN, 1995

More information

14.Storage Infrastructure

14.Storage Infrastructure Infrastructure 393 394 14. STORAGE 14.1 There is no specific data source for this item, which compiles data for all types of storages in one place. Data has been individually obtained from Central Warehousing

More information

ShowMatch TM DeltaQ TM Array Rigging Frames Installation and Safety Guidelines

ShowMatch TM DeltaQ TM Array Rigging Frames Installation and Safety Guidelines ShowMatch TM DeltaQ TM Array Rigging Frames Installation and Safety Guidelines Important Safety Instructions pro.bose.com Please read this installation guide carefully and save it for future reference.

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

RUBBER & PLASTIC PARTS FOR AUTOMOTIVE & INDUSTRIAL APPLICATIONS. Company profile

RUBBER & PLASTIC PARTS FOR AUTOMOTIVE & INDUSTRIAL APPLICATIONS. Company profile RUBBER & PLASTIC PARTS FOR AUTOMOTIVE & INDUSTRIAL APPLICATIONS Company profile MIJU PRESENTATION MIJU GROUP is an Aragonese capital firm that started its business activity in 1960, with the aim of offering

More information

2 Coils. We Enable Energy

2 Coils. We Enable Energy Coils 2 Coils We Enable Energy As one of the oldest industrial companies in Switzerland, founded in 1803, we focus on products and systems for power generation, transmission and distribution, rotating

More information

Operating Room Equipment & Supplies - Global Market Outlook ( )

Operating Room Equipment & Supplies - Global Market Outlook ( ) Published on Market Research Reports Inc. (https://www.marketresearchreports.com) Home > Operating Room Equipment & Supplies - Global Market Outlook (2015-2022) Operating Room Equipment & Supplies - Global

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

BSTA Precision strength for major tasks.

BSTA Precision strength for major tasks. BSTA 1250 Precision strength for major tasks. Our experience for your benefit. Every BSTA stamping press contains decades of experience that we have built up, in responding to the demands of ambitious

More information

MOBILE HYDRAULIC SOLUTIONS

MOBILE HYDRAULIC SOLUTIONS ENG MOBILE HYDRAULIC SOLUTIONS COD. 81341E MOBILE HYDRAULIC SOLUTIONS TECHNOLOGIES AND PRODUCT RANGE Gefran is the leading designer and manufacturer of sensor solutions for position, pressure, temperature

More information