CONTINUED FROM PART 2
|
|
- Cody Arnold
- 5 years ago
- Views:
Transcription
1 CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in the Official Journal of The Patent Office. This Journal is being published on weekly basis on every Friday covering the various proceedings on Designs as required according to the provisions of under Rule 22, 25, 27 and 39 of the Design (Amendment) Rules, All the enquiries on this Official Journal and other information as required by the public should be addressed to the Controller General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that the content can be enriched. The Patent Office Journal 26/03/
2 DESIGN CORRIGENDUM A. The of the registered design numbers under Class No dated 13 th July 2007 has been erroneously published in the Patent office Journal (Page No.26756) dated as Mouth Piece instead of Roller for Cartridge Lock. B. The address of the applicant s name of the registered design numbers under Class No dated 21/10/2008 has been erroneously published in the Patent office Journal (Page No.10336) dated 6/11/2009 as One Protector & Gamble Plaza instead of One Procter & Gamble Plaza. C. The of the registered design numbers under Class No dated 5/2/2008 has been erroneously published in the Patent office Journal (Page No.29989) dated 19/06/2009 as Interlocking Confectionery instead of Interlocking Confectionery. D. The of the registered design numbers under Class No dated 14/06/2006 has been erroneously published in the Gazette of India, Part III, Sec.2 (Page No. 393 ) dated 19/05/2007 as an Inhaler Tube instead of Inhaler. E. The Class No. of the registered design numbers under Class No dated 26/04/2007 has been erroneously published in the Patent office Journal ( Page No ) dated 17/10/2008 as instead of F. The proceedings of case no u/s. 31 of design Act,2000 erroneously published in the Patent office Journal (Page No ) dated is hereby withdrawn. The Patent Office Journal 26/03/
3 Design Number Class )Taneja Mines Limited Empire Plaza-102 (Empire Estate), Mehrauh-Gorgaon Road, Sutanpur, New Delhi , India Date of Registration 18/11/2005 Frame Design Number Class )Lutron Electronics Co., Inc., 7200 Suter Road, Coopersburg, PA , U.S.A. Date of Registration 27/03/2006 Combined Keypad and Dimmer Number Date Country 29/256,906 27/03/2006 U.S.A. Design Number Class )Legrand France 128 Avenue DU Marechal DE Lattre-DE-Tassigny FR Limoges (France) 2)Legrand SNC., Date of Registration 12/06/2006 REGISTRATION OF DESIGNS The following designs have been registered. They are now open for public inspection. In the following each entry the Date of Registration is shown. The Number, Date and Country are also shown. Electrical Energy Control Switch Number Date Country /06/2006 OHIM The Patent Office Journal 26/03/
4 Design Number Class )MIDCO LTD. Metro Estate, Vidyanagari Marg, Kalina, Mumbai, India Date of Registration 06/07/2007 Pumping Unit for Pumping Liquid Design Number Class )ROGER C. TURNER. 280, CAGNEY LN., SUITE 306, NEWPORT BEACH, CA 92663, USA. 2)Roger C. Turner. Date of Registration 13/07/2007 Hydraulic Bottle Jack Design Number Class )Gooday Enterprises. P.O. Rampur (Patnagarh), Dist. Bolangir, Pin , Orissa, India. Date of Registration 20/08/2007 Container The Patent Office Journal 26/03/
5 Design Number Class )M/S Romsons International 62, Industrial Estate, Nunhai, Agra, UP, India. Date of Registration 12/09/2007 Close Urine Chamber Design Number Class )Kubota Corporation., 2-47, Shikitsuhigashi 1-Chome, Naniwa-Ku, Osaka-Shi, Osaka, Japan. Date of Registration 13/09/2007 Cabin for Work Vehicle Number Date Country /06/2007 Japan Design Number Class )Kubota Corporation., 12-16, Shikitsuhigashi 1-Chome, Naniwa-Ku, Osaka-Shi, Osaka, Japan. Date of Registration 13/09/2007 Control-Console Box for Work Vehicle Number Date Country /06/2007 Japan The Patent Office Journal 26/03/
6 Design Number Class )Sheth Manufacturing Works Shed No. 2, Rambaug, Malad, Mumbai , Maharshtra, India Date of Registration 24/09/2007 Storage Container Design Number Class )Satish Gokhale Rajeev, 828 Shivaji Nagar, V.G.Kale Road, Pune , Maharashtra, India Date of Registration 24/09/2007 Driving Units for Surgical Instruments Design Number Class )Colgate-Pamolive Company 300 Park Avenue, New York, USA Date of Registration 11/10/2007 Soap Bar Number Date Country /04/2007 China The Patent Office Journal 26/03/
7 Design Number Class )Sway as, A Norwegian Corporation Fanvein 96, 5239 Radal, Norway Date of Registration 12/04/2007 Blade Mount and Blade Assembly For a Wind Turbine Number Date Country /04/2007 Norway Design Number Class )Sway as, A Norwegian Corporation Fanvein 96, 5239 Radal, Norway Date of Registration 12/04/2007 Blade Mount and Blade Assembly For a Wind Turbine Number Date Country /04/2007 Norway Design Number Class )Selvel Industries 1st Floor, Vakil Industrial Estate Walbhat Road, Goregaon(E), Mumbai Date of Registration 15/10/2007 Bowl The Patent Office Journal 26/03/
8 Design Number Class )SHARP KABUSHIKI KAISHA 22-22, NAGAIKE-CHO, ABENO-KU, OSAKA, JAPAN. Date of Registration 25/04/2007 Refrigerator Number Date Country /04/2007 Japan Design Number Class )Swaraj Mazda Limited , SECTOR-34-A, CHANDIGARH , INDIA. Date of Registration 17/10/2007 BUS Design Number Class )Sara Lee Household and Body Care Nederland B.V., Vleutensevaart 35, 3532 AD Utrecht, The Netherlands. Date of Registration 26/10/2007 Air Deodorising Apparatus Number Date Country 000,775, /08/2007 EUROPEAN UNION The Patent Office Journal 26/03/
9 Design Number Class )SAMSUNG ELECTRONICS CO. LTD., 416, MAETAN 3-DONG, PALDAL-GU, SUWON-CITY, KYUNGGI- DO, KOREA. Date of Registration 01/11/2007 copy machine Design Number Class )Bio Medico GmbH Hardtring 35, Stockach, Germany Date of Registration 02/05/2007 Medical Apparatus Number Date Country /05/2007 Germany Design Number Class )Kohler Co 444 Highland Dirve Koiiler Wisconsin United States Of America Date of Registration 04/05/2007 Sink Number Date Country 29/279,687 04/05/2007 U.S.A. The Patent Office Journal 26/03/
10 Design Number Class )Concentric Pumps Gate No. 26/1, 27 & 28 (Part), Lonikand, Pune , Maharashtra, India. Date of Registration 14/11/2007 Oil Pump Design Number Class )ANNAMANENI RAMARAO., DOOR NO , OPP: MISSION HOSPITAL, STREET NO. 1, RAMNAGAR, MAIN ROAD, METPALLY , KARIMNAGAR, A.P, INDA.I 2)Annamaneni Ramarao Date of Registration 19/12/2007 Cell Phone Design Number Class )SHRI ATUL KANT GUPTA, SHRI AJAY AGARWAL, SMT. RACHNA AGRAWAL AND SMT. MADHULIKA GUPTA., VIBGYOR OVERSEAS, 2/60, MAKHAN LAL PLAZA, PUTURIA MAHAL, YAMUNA KINARA ROAD, AGRA, UP, INDIA. 2)Vibgyor Overseas Date of Registration 22/07/2008 Decorative Article The Patent Office Journal 26/03/
11 Design Number Class )Siemens Aktiengesellschaft Wittelsbacherplatz 2, D-80333, Munich, Germany Date of Registration 05/08/2008 Row Installation Device Design Number Class )Hawkins cookers Limited Maker Tower F 101, Cuffe Parade, P. O. Box 16083, Mumbai , Maharashtra, India Date of Registration 06/08/2008 Cooking Utensil Design Number Class )Liberty Shoes Limited Liberty Puram, 13, Milestone, GT Karnal Road, Kutail, DT-Karnal , Haryana, India Date of Registration 28/08/2008 Footwear The Patent Office Journal 26/03/
12 Design Number Class )Tata Elxsi Limited ITPB Road, Whitefield, Bangalore , Karnataka, India Date of Registration 27/08/2008 Bus Design Number Class )Ajanta India Limited Ajanta Industrial Estate, Opposite Reva Park, Morbi-Rajkot Highway, Morbi (Gujarat), India Date of Registration 19/09/2008 Cell Phone Design Number Class )Life Scan Scotland Limited Beechwood Park North, Inverness IV2 3ED, State of Incorporation UK Date of Registration 22/09/2008 Analyte Test Meter Number Date Country 29/ /03/2008 U.S.A. The Patent Office Journal 26/03/
13 Design Number Class )Hopson (H.K.) Limited Room 1707, 17/F, Harcourt House, 39 Gloucester Road Wanchai, Hong Kong Date of Registration 29/09/2008 Number Date Country Main Unit /9 28/03/2008 EUROPEAN UNION Design Number Class )Formway Furniture Limited 176 Gracefield Road, Petone, Wellington, New Zealand Date of Registration 08/10/2008 Chair Number Date Country /04/2008 New Zealand Design Number Class )Panasonic Corporation 1006, Oaza Kadoma, Kadoma-Shi, Osaka , Japan Date of Registration 20/10/2008 Light Emitting Diode Lamp The Patent Office Journal 26/03/
14 Design Number Class )ebm-papst Mulfingen Gmbh & Co., KG Bachmuhle 2, Mulfingen, Germany Date of Registration 22/10/2008 Fan Number Date Country /05/2008 OHIM Design Number Class )Kinex Bearings, A.S. 1. Maja 71/36, Bytca, Slovak Republic 2)Kinex Bearings, A.S. Date of Registration 30/10/2008 Packaging Number Date Country /07/2008 OHIM Design Number Class )Continental Aktiengesellschaft Vahrenwalder Strasse 9, D Hannover, Germany Date of Registration 10/11/2008 Tyre Number Date Country /06/2008 OHIM The Patent Office Journal 26/03/
15 Design Number Class )Shree Harikrupa Die Casting K-1, 242/17, B/h, Mel-Tech, Nr., Turbo Bearing, Aji Vasahat GIDC, Pin , Rajkot, Gujarat, India Date of Registration 11/11/2008 Sofa Leg Design Number Class )LG Electronics INC. 20 Yoido-Dong Yongdungpo-Gu, Seoul, Republic of Korea Date of Registration 18/11/2008 Cellular Phone Number Date Country /05/2008 Republic of Korea Design Number Class )Motorola Inc East Algonquin Road, Schaumburg, Illinois 60196, USA Date of Registration 18/11/2008 Remote Control Device Number Date Country 29/318,959 31/05/2008 U.S.A. The Patent Office Journal 26/03/
16 Design Number Class )Clutch Auto Limited 12/4 Mathura Road, Faridabad, Haryana , India Date of Registration 28/11/2008 Clutch Disc Design Number Class )Kohler France SAS Immeuble Le Cap, 3, Rue De Brennus, LA Plaine St., Denis Cedex, France Date of Registration 01/12/2008 Number Date Country Toilet Bowl /06/2008 EUROPEAN UNION Design Number Class )M/s Loom Crafts Furniture (India) Pvt. Ltd. A-7/98 & 99, South Side of G. T. Road, Industrial Area, Ghazizbad , (U.P.), India Date of Registration 22/12/2008 Table The Patent Office Journal 26/03/
17 Design Number Class )M/s Loom Crafts Furniture (India) Pvt. Ltd. A-7/98 & 99, South Side of G. T. Road, Industrial Area, Ghazizbad , (U.P.), India Date of Registration 22/12/2008 Chair Design Number Class )M/s Loom Crafts Furniture (India) Pvt. Ltd. A-7/98 & 99, South Side of G. T. Road, Industrial Area, Ghazizbad , (U.P.), India Date of Registration 22/12/2008 Chair Design Number Class )M/s Loom Crafts Furniture (India) Pvt. Ltd. A-7/98 & 99, South Side of G. T. Road, Industrial Area, Ghazizbad , (U.P.), India Date of Registration 22/12/2008 Chair The Patent Office Journal 26/03/
18 Design Number Class )M/s Loom Crafts Furniture (India) Pvt. Ltd. A-7/98 & 99, South Side of G. T. Road, Industrial Area, Ghazizbad , (U.P.), India Date of Registration 22/12/2008 Table Design Number Class )M/s Loom Crafts Furniture (India) Pvt. Ltd. A-7/98 & 99, South Side of G. T. Road, Industrial Area, Ghazizbad , (U.P.), India Date of Registration 22/12/2008 Chair Design Number Class )M/s Loom Crafts Furniture (India) Pvt. Ltd. A-7/98 & 99, South Side of G. T. Road, Industrial Area, Ghazizbad , (U.P.), India Date of Registration 22/12/2008 Chair The Patent Office Journal 26/03/
19 Design Number Class )M/s Loom Crafts Furniture (India) Pvt. Ltd. A-7/98 & 99, South Side of G. T. Road, Industrial Area, Ghazizbad , (U.P.), India Date of Registration 22/12/2008 Pool Side Sun Lounger Design Number Class )Mala''s Fruit Products Bhose Village, P.O.Box 73, Panchgani , Maharashtra, India. Date of Registration 05/01/2009 Bottle Design Number Class )M/s Patidar Polymers 9 Sonal Industrial Estates, Survey No. 212, Veraval (Shapar), Dist. Rajkot, Gujarat, India. Date of Registration 12/02/2009 Slicer The Patent Office Journal 26/03/
20 Design Number Class )Anisha Enterprise., 17/A, Kamarpara Lane, Chowdhury Para, Krishna Nagar, Nadia , India. Date of Registration 30/03/2009 Switching Modules Design Number Class )Meenaben Nileshbai Shah A1/4/2, Ocean Park, Nr. Nehru Nagar Circle, Satellite Road, Ahmedabad , Gujarat, India Date of Registration 16/04/2009 Walking Steak Design Number Class )Meenaben Nileshbai Shah] A1/4/2, Ocean Park, Nr. Nehru Nagar Circle, Satellite Road, Ahmedabad , Gujarat, India Date of Registration 16/04/2009 Walking Steak The Patent Office Journal 26/03/
21 Design Number Class )Swarovski Aktiengesellschaft Droschistrasse 15, FL-9495 Triesen, Liechtenstein Date of Registration 16/04/2009 Accessories for Lamp Number Date Country /10/2008 OHIM Design Number Class )Lego A/s Aastvej 1, DK-7190 Billund, Denmark Date of Registration 30/04/2009 Toy Building Element Number Date Country /11/2008 OHIM Design Number Class )Tokyo Electron Limited 3-1 Akasaka 5-Chome, Minato-Ku, Tokyo , Japan 2)X-Style Inc. Date of Registration 27/05/2009 Mobile Communication Terminal The Patent Office Journal 26/03/
22 Design Number Class )The Gillette Company Prudential Tower Building, Boston State of Massachusetts, United States of America Date of Registration 17/06/2009 Shaving Razor Connector Number Date Country 29/329,810 22/12/2008 U.S.A. Design Number Class )Hansgrohe AG, Auestr. 5-9, D Schiltach, Germany Date of Registration 22/06/2009 Sanitary Faucet Number Date Country /01/2009 OHIM Design Number Class )Dasmesh Mechanical Works Rajkot Road, Malerkotla (Punjab), India Singh 3)Sardar Karnail Singh 4)Sardar Mohan Singh 5)Sardar Harpal Singh Date of Registration 23/06/2009 2)Sardar Amar Harvester Combine The Patent Office Journal 26/03/
23 Design Number Class )Dasmesh Mechanical Works Rajkot Road, Malerkotla (Punjab), India Amar Singh 3)Sardar Karnail Singh 4)Sardar Mohan Singh 5)Sardar Harpal Singh Date of Registration 23/06/2009 2)Sardar Four Wheel Drive System of Harvester Combine Design Number Class )Samsung Electronics Co., Ltd. 416 Maetan-Dong, Yeongtong-Gu, Suwon-SI, Gyeonggi-Do. Korea Date of Registration 07/07/2009 Mobile Phone Number Date Country /06/2009 Korea(North) The Patent Office Journal 26/03/
CONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 3
CONTINUED FROM PART 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 2
CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART-1
CONTINUED FROM PART-1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART 2
CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationSignature: Date: April
Samsung Electronics Co., Ltd 129, Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea Declaration of REACH Substances of Very High Concern (SVHCs) Disclosure Model: LED Component (Model List: See page
More informationCONTINUED FROM 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationParts Manual. cascade. Single-Double Pallet Handler. Model 50D-ES-012. Serial Number
c Parts Manual Model Single-Double Pallet Handler Serial Number 50D-ES-02 To Order Parts call: 888-227-22, Fax: 888-29-024 OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Safety Decals
More informationARTS MANUAL. 70F Fork Clamp. Manual Number R-0. cascade. Cascade is a Registered Trademark of Cascade Corporation
P ARTS MANUAL 0F Fork Clamp Manual Number 89 R-0 cascade Cascade is a Registered Trademark of Cascade Corporation 80-0D-CFS-B About This Manual Introduction This Manual shows the parts breakdown for standard
More informationIFC07 E-03. USB Connectors HDMI Connectors DisplayPort Connectors
ELEC T R ONIC COMPONEN T S IFC07 E-03 USB Connectors HDMI Connectors DisplayPort Connectors Contents Contents 1 USB3.0 Connectors Plug Cables 2 USB Connectors Mini-B Receptacles 3 Plugs 4-5 HDMI Connectors
More informationHORIBA Jobin Yvon GmbH HORIBA Vietnam Company Limite ted Hea d Offi ce HORIBA ITALIA Srl Mil ano Office HORIBA Korea Ltd. Seoul Branch HORIBA Instruments Inc. Edison office HORIBA FRANCE SAS HORIBA India
More informationCONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationAgilent 4UHV Ion Pump Controller. For Ultra High Vacuum
Agilent 4UHV Ion Pump Controller For Ultra High Vacuum The New Agilent 4UHV Ion Pump Controller The new state-of-the-art Agilent 4UHV Ion Pump Controller operates up to four pumps simultaneously and independently.
More informationHigh Accuracy Wire Electrical Discharge Machines
Equipment and Construction Work for Machine Installation 1. Floor area and foundation work 4. Electrical work W32FB W53FB 2. Factory air-conditioning equipment Recommended optimal temperature 20 1 Heat
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 3 INTRODUCTION
CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationParts Manual. cascade. Single-Double Pallet Handler. Model 55E-FD-449. Serial Number
c Parts Manual Model Single-Double Pallet Handler Serial Number -FD-449 For Technical Assistance call: 800-7-33, Fax: 888-39-807 To Order Parts call: 888-7-33, Fax: 888-39-034 OR Write: Cascade Corporation,
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationInformation Technology and Economic Development: An Introduction to the Research Issues
November 1998 Working Papers No. 153 Information Technology and Economic Development: An Introduction to the Research Issues TABLE 1 WORLD-WIDE INFORMATION TECHNOLOGY MARKET BREAKDOWN, 1995
More informationC-Series Fork Positioners
P ARTS MANUAL C-Series Fork Positioners Product Model Numbers C-FPB-A001 C-FPB-A00 C-FPB-A003 100C-FPB-B001 100C-FPB-B00 100C-FPB-B003 10C-FPB-C001 10C-FPB-C00 10C-FPB-C003 10C-FPB-C001 10C-FPB-C00 10C-FPB-C003
More informationParts Manual. cascade
c Parts Manual Model Sideshifter Serial Number 60E-SSS-359 corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet:
More informationAUTHORITY FOR ADVANCE RULINGS (INCOME TAX)
DATE: 26.12.2016 (Monday) 1 AAR/971/2010 LG Electronics India Pvt. Ltd.,Greater Noida (UP) S245R(2) CIT (IT), Noida 2 AAR/1064/2011 The Goodyear Tire & Rubber Company, USA S245R(2) CIT(IT) - 2, ND 3 AAR/1214/2011
More informationCONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationParts Manual. cascade
c Parts Manual Model F-Series Sideshifter Serial Number -SSS-A156R0 cascade corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234
More informationParts Manual. cascade. Fork Positioner. Model 60E-HS-030. Serial Number
c Parts Manual Model Serial Number Fork Positioner 60E-HS-030 For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234 OR Write: Cascade Corporation,
More informationSlide Bearings Type E For Shaft Diameter Range mm Main Application Field Electric Machines
Slide Bearings Type E For Shaft Diameter Range 160-315 mm Main Application Field Electric Machines End flange mounted slide bearing type EFWF with water-cooling and lubrication by a fixed oil ring RENK
More informationParts Manual. cascade
c Parts Manual Model Serial Number Revolving Drum Clamp D-DFR-AR0 corporation To Order Parts call: 888--, Fax: 888-9-0 OR Write: Cascade Corporation, P.O. Box 08, Portland, OR 90 Internet: www.cascorp.com
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationEuropean Patent Office Annual Report 2017 Country profile: Netherlands
European Patent Office Annual Report 207 Country profile: Netherlands Contact: press@epo.org www.epo.org/media Date of publication: 7 March 208 Growth of European patent applications global 48 027 52 703
More informationCONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationParts Manual. cascade
c Parts Manual Model Serial Number F-Series Sideshifter -SSS-A147R0 cascade corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationParts Manual. cascade. corporation. Bale Clamp. Model 40D-BCB-55A R0. Serial Number
c Parts Manual Model Serial Number Bale Clamp 40D-BCB-A R0 corporation To Order Parts call: 888-227-2233, Fax: 888-329-0234 OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Internet: www.cascorp.com
More informationCONTINUED FROM PART- 3 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationParts Manual. cascade. 50D Turn-A-Load. Model 50D-TAL-116. Serial Number
c Parts Manual Model Serial Number 0D Turn-A-Load 0D-TAL- For Technical Assistance call: 800--, Fax: 888-9-80 To Order Parts call: 888--, Fax: 888-9-0 OR Write: Cascade Corporation, P.O. Box 08, Portland,
More informationInstallation Instructions
c Installation Instructions Toyota Three Function Internal Reeving Hydraulic Supply Kits This sheet describes the installation of Cascade Three Function Internal Reeving Hydraulic Supply Kits for Toyota
More informationISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO
P-EX01-A Solenoid Valve (with M Connector) Conforming to ISO 1507-1, Large capacity EVS1-01 (Size: 01) EVS1-0 (Size: 0) Light weight Size 01 (-position): 0.6kg Size 0 (-position): 0.18kg Flow rate 1000L/min
More informationParts Manual. cascade
c Parts Manual Model Serial Number Revolving Fork Clamp 70D-CFR-CR0 corporation For Technical Assistance call: 800-7-33, Fax: 888-39-807 To Order Parts call: 888-7-33, Fax: 888-39-03 OR Write: Cascade
More informationHYDRAULIC DRY DISC BRAKES PARTS CATALOG
HYDRAULIC DRY DISC BRAKES PARTS CATALOG INTRODUCTION AxleTech International is a global manufacturer, and supplier of axles, axle components, planetary axles, brakes, and aftermarket parts for commercial
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 2
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationthe T series high power motor protector Issue 2 14/01/03
the T series high power motor protector Issue 2 1/01/03 T series design Designed for 12 volt and 2 volt high current switching in automotive DC applications, utilising the well proven Otter 'snap-action'
More informationSLN08 B-01. DC Solenoids
ELECT R O N IC COMPO NENTS SLN08 B-01 DC Solenoids Contents & Features Index & DC Solenoids Features... 1 Solenoid Specifications... 2 Product List... 3 How to Select Solenoids... 4-5 DC Solenoids (PM
More informationDelta Planetary Gearbox PA Precision Series
Automation for a Changing World Delta Planetary Gearbox PA Precision Series www.deltronics.ru PA Precision Series Features High Rigidity, High Torque Employs uncaged needle roller bearings with a set design
More informationCircular & Rectangular Multi-Pole Connectors MPC06
Circular & Rectangular Multi-Pole Connectors MPC06 Contents Contents... Multi-Pole Circular Connectors Specifications Table... Product Lineup... P Quick Locking Type... - 7 0P Quick Locking Type... - 0
More informationCONTINUED FROM PART 1
CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationPM 300 APOLLO wet-out
PM 300 APOLLO wet-out Advanced CMP System for 300 mm wet-out Wafer Planarization PM 300 APOLLO wet-out, advanced CMP System for 300 mm wet-out Wafer Planarization Peter Wolters is developing, producing
More informationParts Manual. cascade. 45F Roll Clamp. Model 45F-RCP-173. Serial Number
c Parts Manual Model Serial Number F Roll Clamp F-RCP- For Technical Assistance call: 800--, Fax: 888-9-80 To Order Parts call: 888--, Fax: 888-9-0 OR Write: Cascade Corporation, P.O. Box 08, Portland,
More informationHT, LT U.G. cables & PVC insulated Al wire
HT, LT U.G. cables & PVC insulated Al wire Sl.No Name of the firm s particulars Valid upto 1 M/s. Gloster s Ltd., Kallakal(Vi), Toopran(MN), Medak district, Andra Pradesh ( Ph No: 91-80-2372 2274,2837
More informationCONTINUED FROM PART-1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect
CONTINUED FROM PART-1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationSlide Bearings For Industrial, Marine And Offshore Installations
Slide Bearings For Industrial, Marine And Offshore Installations The advantages of working with RENK Hannover are many; here are a few of particular interest: RENK can boast a depth of experience in bearings
More informationCONTINUED FROM PART- 2 INTRODUCTION
CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More information10LF and 12LF Series Right Angle Grinders
Product Manual 10LF and 12LF Series Right Angle Grinders XX L F 2 XX - XX Tool Series 10 = Aluminum Housing 12 = Ergo Housing Throttle Type L = Locking Lever Motor Size F = 0.4 hp Handle Style 2 = Right
More informationMaximum retail price list. For SIBCO range of bearing housings and accessories Bearing housings, sleeves, locknuts, lock washers and locating rings
Maximum retail price list For SIBCO range of bearing housings and accessories Bearing housings, sleeves, locknuts, lock washers and locating rings Effective from 1 st April, 2017 Engineered for optimized
More informationINSTRUCTION MANUAL G-550
INSTRUCTION MANUAL G-550 VERTEX STANDARD CO., LTD. 4-8-8 Nakameguro, Meguro-Ku, Tokyo 153-8644, Japan VERTEX STANDARD US Headquarters 17210 Edwards Rd., Cerritos, CA 90703, U.S.A. International Division
More informationParts Manual. cascade
c Parts Manual Model Serial Number E Push Pull E-PPS-A001R1 cascade corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 7220 Internet: www.cascorp.com Cascade is a Registered Trademark
More informationParts Manual. cascade
c Parts Manual Model Serial Number 90F Roll Clamp 90F-RCP-2 corporation OR Write: Cascade Corporation, P.O. Box 208, Portland, OR 9220 Internet: www.cascorp.com All dealerships with an open account, please
More informationParts Manual. cascade
c Parts Manual Model Serial Number Revolving Fork Clamp 5D-CFR-AR0 corporation For Technical Assistance call: 800-7-, Fax: 888-9-807 To Order Parts call: 888-7-, Fax: 888-9-0 OR Write: Cascade Corporation,
More informationCONTINUED FROM PART- 1 INTRODUCTION. Journal of The Patent Office. This Journal is being published on weekly basis on every Friday
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationParts Manual. cascade
c Parts Manual Model Serial Number Push/Pull E-PPS-Q00R1 cascade corporation To Order Parts call: 888-227-22, Fax: 888-2-02 OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 7220 Internet: www.cascorp.com
More informationSlide Bearings Type HG
Innovative Power Transmission Slide Bearings Type HG Slide Bearings Type HG Type HG Slide Bearings Slide Bearings Type HG Locating bearings for horizontal hydro turbines operate under high axial loads,
More informationDrive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects
09.2007 / a 4183 en - 03.2008 / b Drive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects www.leroy-somer.com Drive systems
More informationSC05 E-04. AC Inlets Power Supply Connectors
ELECT R O N I C COMPONENTS SC0 E-0 AC Inlets Power Supply Connectors Contents Contents... AC Inlets AC Inlets... AC Inlets (for Lead Wire)... Power Supply Connectors Low-Profile Type Poles... 6 Poles...
More informationAUSTRIA. Table 1. FDI flows in the host economy, by geographical origin. (Millions of US dollars)
Table 1. FDI flows in the host economy, by geographical origin World 5 690 138 6 195 3 184 10 784 7 933 31 154 6 858 9 303 840 10 618 5 760 Developed economies 5 740 13 5 341 2 689 10 137 6 291 29 721
More informationN60 Rotary Vane Pneumatic Motor
Parts Manual PL70-1043EN 24-1312N60 Rotary Vane Pneumatic Motor For additional product information visit our website at http://www.apextoolgroup.com PL70-1043EN Cleco 24-1312N60 Rotary Vane Motor Model
More informationAiretool. Gas Line Cleaners Range: 3/4 (19.05mm) to 1-1/2 (38.10mm) Operating & Service Manual PL EN 10/01/2015
Operating & Service Manual PL9-6026EN 0/0/205 Airetool Gas Line Cleaners Range: 3/4 (9.05mm) to -/2 (38.0mm) For additional product information visit our website at http://www.apextoolgroup.com PL9-6026EN
More informationCivil Dialogue Group on WINE Thursday April 19th, 2018
COMMISSION EUROPÉENNE DIRECTION GÉNÉRALE DE L'AGRICULTURE ET DU DÉVELOPPEMENT RURAL Directorate G. Markets and Observatories G.2. Wine, spirits and horticultural products Bruxelles, le G.2/GD(2017) Civil
More informationElevate the user experience with sleek and intuitive design
Elevate the user experience with sleek and intuitive design Aesthetic options for every project and price point. lutron.com/palladiom Understated elegance for where you work. Distinct character for where
More informationParts Manual EN PL30-12R04 07/21/ R04 Series 0.1 HP Inline Pencil Grinder
Parts Manual PL30-12R04 12R04 Series 0.1 HP Inline Pencil Grinder For additional product information visit our website at http://www.apextoolgroup.com Dotco Nomenclature 12 R 04 XX - X X Series 12 = Ergo
More informationParts Manual. cascade
c Parts Manual Model Single-Double Pallet Handler Serial Number -FDS-53 corporation OR Write: Cascade Corporation, P.O. Box 087, Portland, OR 970 Internet: www.cascorp.com Cascade is a Registered Trademark
More informationElevate the user experience with sleek and intuitive design
Elevate the user experience with sleek and intuitive design Aesthetic options for every project and price point. lutron.com/palladiom Keypad shown in Satin Nickel (SN) Understated elegance for where you
More informationOne machine multiple applications.
One machine multiple applications. image 1 image 2 image 3 image 4 Manufacturing of engineering plastics. Processing of PVC. Manufacturing of TPE. Manufacturing of master batches. Coperion worldwide. >
More informationParts Manual. cascade
c Parts Manual Model Serial Number D-RR-24A 892 corporation OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Internet: www.cascorp.com Rotator Group 4 2 7 8 RR02.ill $ # @! 9 0 REF QTY
More informationParts Manual. cascade
c Parts Manual Model Serial Number Paper Roll Clamp 0G-RCP-B00R corporation OR Write: Cascade Corporation, P.O. Box 08, Portland, OR 90 Internet: www.cascorp.com 4 Decals C-4-4 RC04.ill C-4-4 SHORT ARM
More informationParts Manual. cascade. corporation. Sideshifter. Model 100E-SSS-B203 R0. Serial Number
c Parts Manual Model Serial Number Sideshifter 100E-SSS-B203 R0 corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234 OR Write:
More informationCRYSTALLINE SILICON PV MODULE INSTALLATION GUIDE THE POWER OF ASTRONERGY
CRYSTALLINE SILICON PV MODULE INSTALLATION GUIDE THE POWER OF ASTRONERGY CRYSTALLINE SILICON PV MODULE INSTALLATION GUIDE 1. Introduction 1.1 Purpose 1.2 Limitation of Liability 2. Safety 2.1 General Safety
More informationInnovative Power Transmission. Slide Bearings Type E. Series EG Journal Range mm
Innovative Power Transmission Slide Bearings Type E Series EG Journal Range 475-1250 mm RENK Slide Bearings Type E ➀ Type E ➁ Housing G smooth, foot-mounted ➂ Heat dissipation N Z X 5) W 5) U T natural
More informationCONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationCONTINUED FROM PART- 1 INTRODUCTION
CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published
More informationParts Manual. cascade. Push/Pull. Model 45E-PA-392. Serial Number
c Parts Manual Model Serial Number Push/Pull E-PA-392 For Technical Assistance and to Order Parts... Call: 1-800-CASCADE or 03-669-6300 OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 9729-0187
More informationDC MOTORS. Crompton Greaves EVERYDAY SOLUTIONS
Crompton Greaves EVERYDAY SOLUTIONS DC MOTORS LT MOTORS DIVISION A - 6/2, M.I.D.C., AHMEDNAGAR - 414111. MAHARASHTRA. TEL : +91 (0241) 2776 151-154, 2776146, 2776187. FAX : +91 (0241) 2777508 INTRODUCTION
More informationNevro Lead Compatibility
Nevro Lead Compatibility Directions for Use 91131569-01 REV B CAUTION: Federal law restricts this device to sale, distribution and use by or on the order of a physician. Guarantees Boston Scientific Corporation
More informationParts Manual. cascade
c Parts Manual Model Serial Number 0F Roll Clamp 0F-RCS-2 corporation For Technical Assistance call: 800-227-22, Fax: 888-29-8207 OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Internet:
More informationElectric Lowering & Raising System 20kg PRODUCT TYPE. Max. weight of light fitting Lowering distance. 4. Lamp circuits. No. of circuit No.
Electric Lowering & Raising System The cost effective maintenance solution for luminaires FEATURES Designed for use of heavier weight light fittings. TYPICAL APPLICATIONS Workshops, Factories, Warehouses
More informationParts Manual. cascade
c Parts Manual Model Serial Number G Roll Clamp G-RCF-B004R0 corporation OR Write: Cascade Corporation, P.O. Box 08, Portland, OR 90 Internet: www.cascorp.com 4 Decals cascade C-4-4 RC04.ill cascade C-4-4
More informationKare Zindagi Instant Start
Kare Zindagi Instant Start KIND ATTENTION t In event of any particular model being phased out or out of stock, the Company reserves the right to provide another equivalent model of same capacity best
More information