CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

Size: px
Start display at page:

Download "CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,"

Transcription

1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in the Official Journal of The Patent Office. This Journal is being published on weekly basis on every Friday covering the various proceedings on Designs as required according to the provisions of under Rule 22, 25, 27 and 39 of the Design (Amendment) Rules, All the enquiries on this Official Journal and other information as required by the public should be addressed to the Controller General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that the content can be enriched. The Patent Office Journal 01/02/

2 DESIGN CORRIGENDUM The Registered Design No which has been erroneously published in the official Journal of India dated 31/08/2012, part II, at page 14170, column 2 in the name of Colgate-Palmolive Company 300 Park Avenue, New York, Ne York 10022, USA, Class 04-02, Date of Registration 11/10/2011, Titled as Toothbrush, Priority Number 29/390, 961, Date 02/05/2011, Country U.S.A. should read as Colgate- Palmolive Company 300 Park Avenue, New York, New York 10022, USA, Class 04-02, Date of Registration 11/10/2011, Titled as Toothbrush, Priority Number 29/390, 961, Date 02/05/2011, Country U.S.A. The Patent Office Journal 01/02/

3 COPYRIGHT PUBLICATION SL NO CASE NUMBERS RENEWED ON The Patent Office Journal 01/02/

4 CANCELLATION PROCEEDINGS under Section 19 of the Designs Act, 2000 The Asstt. Controller of Patents & Designs passed an order on 30/01/2013 to cancel the registration of registered Design No dated 15/6/2011 under Class titled as Chair in the name of National Plasto Products Private Limited, an Indian company having its registered office at 19,Sukeas Lane, 1 st Floor, Kolkata , West Bengal, India. The Patent Office Journal 01/02/

5 THE DESIGNS ACT, 2000 (Under Section 31) RECTIFICATION OF REGISTER Otsuka Pharmaceutical Co. Ltd. and Otsuka Techno Corporation, Japan, filed a request on Form- 17 dated 10/12/2012 through their agent M. Basu of M/s. DePenning & DePenning, Kolkata, for the Rectification of registered proprietors details in respect of Regd. Design number under sec.31 of the said Act in the Register of Design is as follows:- Design No. Entered Details of the Registered Proprietor Changed to ) A CORPORATION ORGANISED AND EXISTING AT 2-9, KANDA- TSUKASAMACHI, CHIYODA-KU, TOKYO, JAPAN, A JAPANESE CORPORATION. 2) A CORPORATION ORGANIZED AND EXISTING AT ITAYASHIMA AKINOKAMI SETO-CHO, NARUTO-SHI, TOKUSHIMA, JAPAN, A JAPANESE CORPORATION 1) A CORPORATION ORGANISED AND EXISTING UNDER THE LAWS OF JAPAN AT 2-9, KANDA- TSUKASAMACHI, CHIYODA-KU, TOKYO, JAPAN, A JAPANESE CORPORATION. 2) A CORPORATION ORGANIZED AND EXISTING UNDER THE LAWS OF JAPAN AT AZA ITAYASHIMA AKINOKAMI SETO-CHO, NARUTO-SHI, TOKUSHIMA, JAPAN, A JAPANESE CORPORATION Notice of opposition to the Rectification of Register of Design may be given as per Rule 40 of the Design Rules, 2001 as amended Design (Amendment) Rules, The Patent Office Journal 01/02/

6 OF DESIGNS The following designs have been registered. They are now open for public inspection. In the following each entry the Date of Registration is shown. The Priority Number, Priority Date and Priority Country are also shown DESIGN NUMBER CLASS )JCB INDIA LIMITED B-1/1-1, 2ND FLOOR, MOHAN CO-OPERATIVE INDUSTRIAL ESTATE, MATHURA ROAD, NEW DELHI, INDIA 24/02/2012 FRONT FRAME OF ASPHALT COMPACTOR DESIGN NUMBER CLASS )KONINKLIJKE PHILIPS ELECTRONICS N.V. GROENEWOUDSEWEG 1, 5621 B A, EINDHOVEN, THE NETHERLANDS 01/03/2012 SOLID STATE SPOTLIGHT /09/2011 OHIM DESIGN NUMBER CLASS )KHAITAN (INDIA) LIMITED 46C, JAWAHAR LAL NEHRU ROAD, KOLKATA , WEST BENGAL, INDIA 15/03/2012 EXHAUST FAN The Patent Office Journal 01/02/

7 DESIGN NUMBER CLASS )REMIDIO INNOVATIVE SOLUTIONS PVT. LTD. #2206, NANDI PARK, GOTTIGERE, BANNERGHATTA ROAD, BANGALORE , KARNATAKA, INDIA 19/03/2012 EYE TESTING APPARATUS DESIGN NUMBER CLASS )ALFA LAVAL CORPORATE AB BOX 73, SE LUND, SWEDEN 01/02/2012 ELECTRONIC UNIT FOR CONTROLLING CLEANING OF A TANK /12/2011 OHIM DESIGN NUMBER CLASS )JITENDRA JAIN S/O. SH. DILEEP KUMAR JAIN (NATIONALITY-INDIAN) M/S. GANESH SURGICALS IT IS INDIAN PROPRIETORSHIP FIRM AT- G-3, 1596, HAMIR GARH, NATINIYO KA RASTA, FILM COLONY, CHORA RASTA, JAIPUR (RAJ.) NATIONALITY-INDIAN 27/06/2012 BEDPAN The Patent Office Journal 01/02/

8 DESIGN NUMBER CLASS )RECKITT BENCKISER LLC MORRIS CORPORATE CENTER IV, 399 INTERPACE PARKWAY, PARSIPPANY, NEW JERSEY 07054, USA 04/04/2012 REMOVABLE OUTER COVER OF A DISPENSER /10/2011 OHIM DESIGN NUMBER CLASS )OLIVER KESSLER DESIGN GMBH TURFSTR. 11, MUNCHEN, GERMANY 13/04/2012 FAN BLADE /03/2012 OHIM DESIGN NUMBER CLASS )HUNTER PACIFIC INTERNATIONAL PTY LTD, OF BUILDING 8, 256 NEW LINE ROAD, NEW LINE BUSINESS PARK, DURAL NSW 2158, AUSTRALIA; NATIONALITY: AUSTRALIAN 01/06/2012 ELECTRICAL CONNECTOR 15611/ /12/2011 AUSTRALIA The Patent Office Journal 01/02/

9 DESIGN NUMBER CLASS )BRIDGESTONE CORPORATION 10-1, KYOBASHI 1-CHOME, CHUO-KU, TOKYO , JAPAN 13/03/2012 TIRE TREAD JP /09/2011 JAPAN DESIGN NUMBER CLASS )SATA GMBH & CO. KG DOMERTALSTRASSE 20, KORNWESTHEIM, DEUTSCHLAND, GERMANY 14/03/2012 ANTISTATIC SPRAY GUN /11/2011 GERMANY DESIGN NUMBER CLASS )BMS PRIVATE LIMITED, AN INDIAN COMPANY INCORPORATED UNDER THE COMPANIES ACT, 1956, HAVING PRINCIPAL PLACE OF BUSINESS AT PARSURAM-I, OPP. AJAY WAY BRIDGE, MANDA DUNGAR, RAJKOT , GUJARAT STATE, INDIA 12/07/2012 KITCHEN BASKET The Patent Office Journal 01/02/

10 DESIGN NUMBER CLASS )EVERSHINE OLEOCHEM LIMITED, 614 TULSIANI CHAMBER, NARIMAN POINT, MUMBAI /07/2012 BATH SOAP DESIGN NUMBER CLASS )STICHTING ENERGIEONDERZOCK CENTRUM NEDERLAND WESTERDUINWEG 3, 1755 LE PETTEN, THE NETHERLANDS 25/10/2011 SOLAR CELL /05/2011 OHIM DESIGN NUMBER CLASS )DEERE & COMPANY ONE JOHN DEERE PLACE, MOLINE, ILLINOIS, , USA 17/02/2012 ARTICULATED WHEEL LOADER The Patent Office Journal 01/02/

11 DESIGN NUMBER CLASS )MICROSOFT CORPORATION, (A CORPORATION OF THE STATE OF WASHINGTON) OF ONE MICROSOFT WAY, REDMOND, WASHINGTON, 98052, U.S.A., AMERICAN COMPANY 25/07/2012 ELECTRONIC MOUSE 29/ /03/2012 U.S.A. DESIGN NUMBER CLASS )ITC LIMITED, AN INDIAN COMPANY WITHIN THE MEANING OF THE COMPANIES ACT, 1956 OF VIRGINIA HOUSE, 37, J. L. NEHRU ROAD, KOLKATA , WEST BENGAL, INDIA 30/07/2012 JAR DESIGN NUMBER CLASS )MR. IGNATIUS ORWIN NORONHA S/O LATE JAMES NORONHA, #406, MANNAGUDDA TOWERS, MANNAGUDDA, MANGALORE , KARNATAKA, INDIA 19/03/2012 INSECT TRAP The Patent Office Journal 01/02/

12 DESIGN NUMBER CLASS )MASCO CORPORATION OF INDIANA 55 EAST 111TH STREET, INDIANAPOLIS, INDIANA /02/2012 TOWEL/TISSUE HOLDER 29/400, /08/2011 U.S.A. DESIGN NUMBER CLASS )NAYASA HOMEWARE OF SURVEY NO. 367/16 & 378/2 KACHIGAM, NANI DAMAN, DAMAN , (UNION TERRITORIES) DAMAN UNION TERRITORIES, INDIA, INDIAN PARTNERSHIP FIRM, WHOSE PARTNERS ARE VIJAY PRAKASH SACHDEV, MRS. NUTAN MALIK ALL INDIAN NATIONALS OF ABOVE ADDRESS 21/06/2012 CAP FOR BOTTLE DESIGN NUMBER CLASS )MARUTI MICHENICAL WORKS MAHADEV ESTATE, VADGAMA ESTATE STREET, ATIKA CORNER, DHEBAR ROAD (SOUTH), RAJKOT , GUJARAT, INDIA 02/04/2012 HANDLE The Patent Office Journal 01/02/

13 DESIGN NUMBER CLASS )JCB INDIA LIMITED B-1/1-1, 2ND FLOOR, MOHAN CO-OPERATIVE INDUSTRIAL ESTATE, MATHURA ROAD, NEW DELHI, INDIA 02/04/2012 BASE FRAME FOR HYDRAULIC CRANE DESIGN NUMBER CLASS )UMA PLASTICS LIMITED 14B CAMAC STREET, 3RD FLOOR, SUITE NO. 3D, KOLKATA , WEST BENGAL, INDIA 09/04/2012 SEAT OF A CHAIR DESIGN NUMBER CLASS )ASHOKBHAI JAYANTIBHAI MANDVIYA PREMGADH, TAL: JETPUR, DIST: RAJKOT, GUJARAT, INDIA 12/04/2012 LAMP HOLDER The Patent Office Journal 01/02/

14 DESIGN NUMBER CLASS )GAS SAFE INDIA MARKETING 421, EAST WING, AURORA TOWERS, PUNE CAMP, PUNE , MAHARASHTRA, INDIA 11/11/2011 GAS STOVE DESIGN NUMBER CLASS )OMRON CORPORATION 801, MINAMIFUDODO-CHO, HORIKAWAHIGASHIIRU, SHIOKOJI-DORI, SHIMOGYO-KU, KYOTO-SHI, KYOTO , JAPAN 14/03/2012 THERMOSTAT /09/2011 CHINA DESIGN NUMBER CLASS )SAMSUNG ELECTRONICS CO., LTD., 129, SAMSUNG-RO, YEONGTONG-GU, SUWON-SI, GYEONGGI-DO, , REPUBLIC OF KOREA, A COMPANY OF REPUBLIC OF KOREA 03/07/2012 ELECTRONIC DEVICE /01/2012 REPUBLIC OF KOREA The Patent Office Journal 01/02/

15 DESIGN NUMBER CLASS )IMPERATIV HOSPITALITY (P) LTD. (AN INDIAN COMPANY DULY INCORPORATED UNDER THE COMPANIES ACT, 1956 WITH LIMITED LIABILITY) AT 90, BANGLA SAHIB, NEW DELHI OF ABOVE ADDRESS 04/07/2012 MIRROR STAND DESIGN NUMBER CLASS )BODY TEC FITNESS EQUIPMENT COMPANY, MEENA KI DHANI, DAULATPURA BENAD ROAD, SARNA DOONGER, JAIPUR, RAJASTHAN, INDIA 10/07/2012 EXERCISE MACHINE DESIGN NUMBER CLASS )FINE FOOTWEAR (P) LTD., #30, 1ST FLOOR, ARCHANA MARKET, SULTANPET, BANGALORE , STATE OF MAHARASHTRA, (INDIA), A PVT. LTD., COMPANY INCORPORATED UNDER INDIAN COMPANIES ACT, INDIAN NATIONAL OF ABOVE ADDRESS 13/07/2012 FOOTWEAR The Patent Office Journal 01/02/

16 DESIGN NUMBER CLASS )SHREE MAHAVIR METALCRAFT PVT. LTD. PLOT NO. 3059, GIDC, PHASE III, DARED JAMNAGAR, GUJARAT, PIN , INDIA 16/02/2012 HANDLE DESIGN NUMBER CLASS )C. P. AGARWAL, AN INDIAN NATIONAL, TRADING AS M/S. C. P. PANEL FITTINGS, RZ-101/46A, MOHAN NAGAR, PANKHA ROAD, NEW DELHI /07/2012 PANEL LOCK BODY DESIGN NUMBER CLASS )ITC LIMITED, AN INDIAN COMPANY WITHIN THE MEANING OF THE COMPANIES ACT, 1956 OF VIRGINIA HOUSE, 37, J. L. NEHRU ROAD, KOLKATA , WEST BENGAL, INDIA 30/07/2012 BOTTLE The Patent Office Journal 01/02/

17 DESIGN NUMBER CLASS )VENKAT RAO, AN INDIAN NATIONAL, HAVING ADDRESS AT H. NO 85, B BLOCK, ZONE NO. 3, BIRSANGAR POST, TELCO, JAMSHEDPUR , INDIA 31/07/2012 TABLET DESIGN NUMBER CLASS )GANDHI & COMPANY (PTY) LIMITED 457, MAIN ROAD, TONGAAT, 4399, KWA ZULU NATAL, SOUTH AFRICA 29/02/2012 URINE COLLECTOR DESIGN NUMBER CLASS )M/S. RAKKISHANTHA EXIM PVT. LTD. A COMPANY INCORPORATED UNDER INDIAN COMPANIES ACT 1956 REPRESENTED BY ITS DIRECTORS MR. M. V. KARTHIKVEL AND MRS. K. GANDHIMATHI, HAVING THE PLACE OF BUSINESS AT NEW NO. 17(OLD NO 8), 2ND FLOOR, MAHALAKSHMI STREET, T-NAGAR, CHENNAI , TAMILNADU, INDIA 25/05/2012 PACKAGING FOR INCENSE STICK The Patent Office Journal 01/02/

18 DESIGN NUMBER CLASS )SELVAKUMARAN A/L MARIMUTHU, A MALAYSIAN CITIZEN, HAVING ADDRESS AS 1200 E JALAN TANJUNG BENDAHARA, ALOR SETAR, KEDAH, 05300, MALAYSIA 25/05/2012 DISPOSABLE PANTY WITH SANITARY PAD /05/2012 MALAYSIA DESIGN NUMBER CLASS )M/S. SARASWATI PLASTO TECH INDIA PVT. LTD. (A COMPANY INCORPORATED UNDER THE INDIAN COMPANIES ACT, 1956), LANE-4, PHASE-1, SIDCO INDUSTRIAL COMPLEX, BARI BRAHMANA, JAMMU /06/2012 CANISTER DESIGN NUMBER CLASS )NIVAROX-FAR S.A., A SWISS COMPANY OF AVENUE DU COLLÃ GE 10, CH-2400 LE LOCLE, SWITZERLAND 26/06/2012 TIMEPIECE COMPONENT DM/ /12/2011 WIPO The Patent Office Journal 01/02/

19 DESIGN NUMBER CLASS )GROZ- BECKERT KG., PARKWEG 2, ALBASTADT, GERMANY 03/10/2011 CUTTER FOR TEXTILE MACHINES /04/2011 OHIM DESIGN NUMBER CLASS )RISHABH INSTRUMENTS PVT. LTD. F: 31, M.I.D.C., SATPUR, NASHIK , MAHARASHTRA, INDIA 29/03/2012 ELECTRIC TRANSDUCER DESIGN NUMBER CLASS )YASH AGARWAL S/O. DR. NAWAL KISHORE AGARWAL, 9, LAXMI COMPLEX, M.I. ROAD, JAIPUR, RAJASTHAN, INDIA 03/04/2012 NECKLACE AND EARRING SET The Patent Office Journal 01/02/

20 DESIGN NUMBER CLASS )GEBERIT INTERNATIONAL AG SCHACHENSTRASSE 77, 8645 JONA, SWITZERLAND 03/04/2012 CONTROL PANEL FOR TOILET FLUSH TANKS /11/2011 WIPO DESIGN NUMBER CLASS )PIUSI S.P.A. VIA PACINOTTI, 16/A-Z.1. RANGAVINO SUZZARA (PROV. OF MANTOVA)-ITALY 04/04/2012 PUMP /10/2011 OHIM DESIGN NUMBER CLASS )CATERPILLAR INC. 100 N.E. ADAMS STREET, PEORIA, ILLINOIS 61629, UNITED STATES OF AMERICA 09/04/2012 TOOL TIP FOR USE ON EARTH MOVING MACHINERY 29/403,570 07/10/2011 U.S.A. The Patent Office Journal 01/02/

21 DESIGN NUMBER CLASS )ABHINAV BHARDWAJ #129, WARD 6, VIKAS NAGAR, DEHRADUN, UTTARAKHAND, PIN , INDIA 12/04/2012 OCEAN WAVE ENERGY HARNESSING PLATFORM DESIGN NUMBER CLASS )TOYOTA JIDOSHA KABUSHIKI KAISHA 1, TOYOTA-CHO, TOYOTA-SHI, AICHI-KEN, , JAPAN 16/04/2012 AUTOMOBILE JPD /10/2011 JAPAN DESIGN NUMBER CLASS )A. J. LON PRODUCTS IS A PROPRIETORSHIP FIRM OF 2ND FLOOR, 220, ASHIRWAD NO-3, RAM MANDIR ROAD, OPP. MOVIE STAR THEATRE, GOREGAON (WEST), MUMBAI , INDIA 06/07/2012 BOTTLE The Patent Office Journal 01/02/

22 DESIGN NUMBER CLASS )VICTAULIC COMPANY 4901 KESSLERSVILLE ROAD, EASTON, PENNSYLVANIA 18040, UNITED STATES OF AMERICA 09/02/2012 ELBOW FITTING FOR FLUID DISTRIBUTION 29/399, /08/2011 U.S.A. DESIGN NUMBER CLASS )PILZ GMBH & CO. KG. FELIX-WANKEL-STR.2, OSTFILDERN, GERMANY 10/02/2012 MODULAR INPUT/OUTPUT DEVICE FOR MACHINE CONTROLLERS /08/2011 OHIM DESIGN NUMBER CLASS )SATA GMBH & CO. KG DOMERTALSTRASSE 20, KORNWESTHEIM, GERMANY 13/02/2012 PROTECTIVE SUIT (SET) /08/2011 GERMANY The Patent Office Journal 01/02/

23 DESIGN NUMBER CLASS )KONINKLIJKE PHILIPS ELECTRONICS N.V. GROENEWOUDSEWEG 1, 5621 B A, EINDHOVEN, THE NETHERLANDS 17/02/2012 SLEEP MEASURING WRISTBAND /08/2011 OHIM DESIGN NUMBER CLASS )HAMILTON HOUSEWARES PVT. LTD. AN INDIAN COMPANY INCORPORATED UNDER THE COMPANIES ACT 1956, HAVING REGISTERED OFFICE AT KAISER-I-HIND BLDG., 3RD FLOOR, CURRIMBHOY ROAD, BALLARD ESTATE, MUMBAI , MAHARASHTRA, INDIA 25/07/2012 CASSEROLE DESIGN NUMBER CLASS )THE PROCTER & GAMBLE COMPANY ONE PROCTER & GAMBLE PLAZA, CINCINNATI, OHIO-45202, UNITED STATES OF AMERICA 30/09/2011 BOX /04/2011 WIPO The Patent Office Journal 01/02/

24 DESIGN NUMBER CLASS )THE GILLETTE COMPANY IP/LEGAL PATENT DEPARTMENT - 3E, ONE GILLETTE PARK, BOSTON, 02127, USA 28/03/2012 SHAVING RAZOR 29/403, /09/2011 U.S.A. DESIGN NUMBER CLASS )SCA HYGIENE PRODUCTS AB, A SWEDISH COMPANY OF SE GÃ TEBORG, SWEDEN 29/06/2012 PAPER NAPKIN DISPENSER /01/2012 OHIM DESIGN NUMBER CLASS )TOUL MEDITECH AB ANGHAMMARGATAN 4, VASTERAS, SWEDEN 04/04/2012 INSTRUMENT TABLE /10/2011 OHIM The Patent Office Journal 01/02/

25 DESIGN NUMBER CLASS )PIAGGIO & C. S.P.A. VIALE RINALDO PIAGGIO 25-PONTEDERA (PI), ITALY 12/04/2012 MOTOR SCOOTER /10/2011 OHIM DESIGN NUMBER CLASS )SELCO SOLAR LIGHT (P) LTD. #742, 15TH CROSS, 6TH PHASE, J P NAGAR, BANGALORE , KARNATAKA, INDIA 12/04/2012 LAMP DESIGN NUMBER CLASS )GRIPPLE LIMITED THE OLD WEST GUN WORKS, SAVILE STREET EAST, SHEFFIELD, S4 7UQ, ENGLAND 02/03/2012 WIRE GRIPPING DEVICE /12/2011 OHIM The Patent Office Journal 01/02/

26 DESIGN NUMBER CLASS )PULLCROWN GMBH PETRUSGASSE 5, 1030 WIEN, AUSTRIA 06/03/2012 BOTTLE CLOSURES /09/2011 OHIM DESIGN NUMBER CLASS )ANDERSON POWER PRODUCTS, INC., 13 PRATTS JUNCTION ROAD, STERLING MA 01564, UNITED STATES OF AMERICA, A U.S. CORPORATION 29/06/2012 PLUG FOR ELECTRICAL CONNECTOR 29/419,346 27/04/2012 U.S.A. DESIGN NUMBER CLASS )DELHI PLASTIC, T-1/118, MANGOLPURI INDUSTRIAL AREA, PHASE-1, DELHI , INDIA. (AN INDIAN PROPRIETORSHIP FIRM WHOSE PROPRIETOR IS :-SH. ANIL BANSAL. AN INDIAN NATIONAL OF THE ABOVE ADDRESS 03/07/2012 SHOE The Patent Office Journal 01/02/

27 DESIGN NUMBER CLASS )WIM PLAST LIMITED, A PUBLIC LIMITED COMPANY REGISTERED UNDER THE PROVISION OF INDIAN COMPANIES ACT, 1956, HAVING OFFICE ADDRESS AT 5, VAKIL INDUSTRIAL ESTATE, WALLBHAT ROAD, GOREGAON (EAST), MUMBAI , MAHARASHTRA, MUMBAI 13/07/2012 STOOL DESIGN NUMBER CLASS )NISSAN JIDOSHA KABUSHIKI KAISHA (ALSO TRADING AS NISSAN MOTOR CO., LTD.), A JAPANESE COMPANY, ORGANIZED AND EXISTING UNDER THE LAWS OF JAPAN, OF NO. 2 TAKARACHO, KANAGAWA-KU, YOKOHAMA-SHI, KANAGAWA-KEN, JAPAN 20/07/2012 FRONT BUMPER FOR AUTOMOBILE DESIGN NUMBER CLASS )FIAT GROUP AUTOMOBILES S.P.A., ITALIAN JOINT STOCK COMPANY OF CORSO GIOVANNI AGNELLI 200, I TORINO (ITALY) 25/07/2012 CAR DM/ /02/2012 WIPO The Patent Office Journal 01/02/

28 DESIGN NUMBER CLASS )DILIP CHHABRIA 21, SANJAY PLAZA, A. B. NAIR ROAD, SILVER BEACH JUHU, MUMBAI , MAHARASHTRA, INDIA 23/02/2012 CAR DESIGN NUMBER CLASS )PRIMA PLASTICS LTD. 41, NATIONAL HOUSE, OPP ANSA INDL. ESTATE, A BLDG., SAKI - VIHAR ROAD, POWAI, ANDHERI (E), MUMBAI /02/2012 COMPUTER TROLLEY DESIGN NUMBER CLASS )SMARTNET SERVICES 402, 4TH FLOOR, SCO 121, FEROZE GANDHI MARKET, LUDHIANA , PUNJAB, INDIA 16/03/2012 POWER SAVER The Patent Office Journal 01/02/

29 DESIGN NUMBER CLASS )NEOPERL GMBH KLOSTERRUNSSTR-11, MULLHEIM, GERMANY 29/07/2011 FLOW REGULATOR /02/2011 OHIM DESIGN NUMBER CLASS )HALLMARK AQUAEQUIPMENT PVT. LTD. 208, RASH BEHARI AVENUE, 2ND FLOOR, KOLKATA , INDIA 29/03/2012 VALVE OPENER DESIGN NUMBER CLASS )CARTIER CREATION STUDIO SA 8 BOULEVARD JAMES FAZY, CH-1201 GENEVE, SWITZERLAND 12/04/2012 JEWEL NÂ DM/ /10/2011 WIPO The Patent Office Journal 01/02/

30 DESIGN NUMBER CLASS )TOYOTA JIDOSHA KABUSHIKI KAISHA 1, TOYOTA-CHO, TOYOTA-SHI, AICHI-KEN, , JAPAN 16/04/2012 AUTOMOBILE JPD /10/2011 JAPAN DESIGN NUMBER CLASS )DELANO WHEATLE, 84 HOPE ROAD, APARTMENT 11, KINGSTON 6, JAMAICA, WEST INDIES, A JAMAICAN CITIZEN 01/06/2012 TOY HOLDER FOR AN AUTOMOBILE DOOR DESIGN NUMBER CLASS )KABUSHIKI KAISHA SOMIC ISHIKAWA HONJO , SUMIDA-KU, TOKYO-KU, TOKYO, JAPAN 09/11/2011 SHOCK ABSORBING DAMPER FOR VEHICLES The Patent Office Journal 01/02/

31 DESIGN NUMBER CLASS )ROCKWELL AUTOMATION TECHNOLOGIES, INC., 1 ALLEN-BRADLEY DRIVE, MAYFIELD HEIGHTS, OHIO 44124, USA 24/11/2011 INDUSTRIAL OPERATOR INTERFACE TERMINAL. 29/393, /06/2011 U.S.A. DESIGN NUMBER CLASS )IMPERATIV HOSPITALITY (P) LTD. (AN INDIAN COMPANY DULY INCORPORATED UNDER THE COMPANIES ACT, 1956 WITH LIMITED LIABILITY) AT 90, BANGLA SAHIB, NEW DELHI OF ABOVE ADDRESS 04/07/2012 BED SWITCH PANEL DESIGN NUMBER CLASS )BESTO INDUSTRIES (INDIA). A PROPRIETORSHIP FIRM AND HAVING ITS PRINCIPAL PLACE OF BUSINESS AT PLOT NO. 192, B. R. K. BHAVAN, 2ND FLOOR, ROOM NO. 9, JAWAHAR NAGAR, GOREGAON (W), MUMBAI /07/2012 CASSEROLE The Patent Office Journal 01/02/

32 DESIGN NUMBER CLASS )EM CEE CEE SPORTS AGENCIES (P) LTD., JONEX HOUSE, SODAL ROAD, JALANDHAR (PUNJAB) (INDIA) (AN INDIAN COMPANY DULY REGISTERED UNDER THE COMPANIES ACT, 1956) OF THE ABOVE ADDRESS 17/07/2012 WHEEL FOR ROLLER SKATE DESIGN NUMBER CLASS )PILZ GMBH & CO. KG. FELIX-WANKEL-STR.2, OSTFILDERN, GERMANY 10/02/2012 MODULAR I/O DEVICE FOR MACHINE CONTROLLERS /08/2011 OHIM DESIGN NUMBER CLASS )ASIA MOTORWORKS LIMITED 7TH FLOOR, TOWER 1, EQUINOX BUSINESS PARK, (PENINSULA-TECHNO PARK), OFF BANDRA-KURLA COMPLEX, L.B.S. MARG, MUMBAI , MAHARASHTRA, INDIA 15/02/2012 HEAVY COMMERCIAL VEHICLE The Patent Office Journal 01/02/

33 DESIGN NUMBER CLASS )NISSAN JIDOSHA KABUSHIKI KAISHA (ALSO TRADING AS NISSAN MOTOR CO., LTD.), A JAPANESE COMPANY, ORGANIZED AND EXISTING UNDER THE LAWS OF JAPAN, OF NO. 2 TAKARACHO, KANAGAWA-KU, YOKOHAMA-SHI, KANAGAWA-KEN, JAPAN 20/07/2012 FRONT BUMPER FOR AUTOMOBILE DESIGN NUMBER CLASS )PIERLITE INDIA PVT. LTD., A COMPANY INCORPORATED UNDER THE INDIAN COMPANIES ACT, HAVING REGISTERED OFFICE AT, RAKHIAL ROAD, AHMEDABAD , GUJARAT STATE, INDIA 23/07/2012 EQUIPMENT FOR CONTROL OF ELECTRIC POWER DESIGN NUMBER CLASS )JALPESHBHAI S. GOSWAMI AND NILESHBHAI S. GOSWAMI BOTH INDIAN NATIONAL PARTNERS OF RUSHIV TECHNOCAST AN INDIAN PARTNERSHIP FIRM HAVING ITS PRINCIPAL PLACE OF BUSINESS AT 80 FEET ROAD, NEAR ACCURATE WEIGH BRIDGE, NEAR AJI VASAHAT, RAJKOT, GUJARAT - INDIA 03/08/2012 HANDLE The Patent Office Journal 01/02/

34 DESIGN NUMBER CLASS )MORPHUN RESEARCH LIMITED, A COMPANY REGISTERED IN THE UNITED KINGDOM OF 7 CHESTERFIELD ROAD, LONDON, W4 3HG, UNITED KINGDOM 21/05/2012 BUILDING BLOCK OF A TOY /12/2011 EUROPEAN UNION DESIGN NUMBER CLASS )AUDI AG, OF INGOLSTADT, GERMANY 30/05/2012 CAR /12/2011 OHIM DESIGN NUMBER CLASS )CARTIER CREATION STUDIO SA 8 BOULEVARD JAMES FAZY, CH-1201 GENEVE, SWITZERLAND 23/03/2012 SPECTACLE NO DM/ /09/2011 WIPO The Patent Office Journal 01/02/

35 DESIGN NUMBER CLASS )DIVYESHBHAI BARASIYA AN INDIAN NATIONAL SOLE PROPRIETOR OF SHREE TECHNOCAST AN INDIAN PROPRIETORSHIP FIRM HAVING ITS PRINCIPAL PLACE OF BUSINESS AT AJI GIDC, SHED NO. K-1-242/5, MAL-TECH CHOWK, NR. TARBO BEARING, RAJKOT-3, GUJARAT-INDIA 19/06/2012 HANDLE DESIGN NUMBER CLASS )M/S. SARASWATI PLASTO TECH INDIA PVT. LTD. (A COMPANY INCORPORATED UNDER THE INDIAN COMPANIES ACT, 1956), LANE-4, PHASE-1, SIDCO INDUSTRIAL COMPLEX, BARI BRAHMANA, JAMMU /06/2012 BOTTLE DESIGN NUMBER CLASS )NIVAROX-FAR S.A., A SWISS COMPANY OF AVENUE DU COLLÃ GE 10, CH-2400 LE LOCLE, SWITZERLAND 26/06/2012 TIMEPIECE COMPONENT DM/ /12/2011 WIPO The Patent Office Journal 01/02/

36 DESIGN NUMBER CLASS )PIUSI S.P.A. VIA PACINOTTI, 16/A-Z.1. RANGAVINO SUZZARA (PROV. OF MANTOVA)-ITALY 04/04/2012 PUMP /10/2011 OHIM DESIGN NUMBER CLASS )CATERPILLAR INC. 100 N.E. ADAMS STREET, PEORIA, ILLINOIS 61629, UNITED STATES OF AMERICA 09/04/2012 TOOL TIP FOR USE ON EARTH MOVING MACHINERY 29/403,600 07/10/2011 U.S.A. DESIGN NUMBER CLASS )SMA SOLAR TECHNOLOGY AG SONNENALLEE 1, NIESTETAL, GERMANY 12/04/2012 ELECTRICAL APPARATUS FOR MONITORING AND CONTROLLING DECENTRALIZED PHOTOVOLTAIC PLANTS /10/2011 OHIM The Patent Office Journal 01/02/

37 DESIGN NUMBER CLASS )SHREE HARIKRUPA DIE CASTING K - 1, 242/17, B/4 MEL - TECH, NEAR TURBO BEARING, AJI VASAHAT GIDC, RAJKOT , GUJARAT, INDIA 16/04/2012 HANDLE DESIGN NUMBER CLASS )THE GILLETTE COMPANY, A COMPANY INCORPORATED UNDER THE LAWS OF UNITED STATES OF AMERICA HAVING ITS REGISTERED OFFICE AT IP/LEGAL PATENT DEPARTMENT - 3E, ONE GILLETTE PARK, BOSTON, MASSACHUSETTS 02127, UNITED STATES OF AMERICA 07/06/2012 SHAVING CARTRIDGE CONNECTOR 29/408,269 09/12/2011 U.S.A. DESIGN NUMBER CLASS )ELEGANZA JEWELLERY LTD. 102/103, SDF IV, S.E.E.P.Z., ANDHERI (E), MUMBAI , MAHARASHTRA, INDIA 15/03/2012 DIAMOND JEWELRY The Patent Office Journal 01/02/

38 DESIGN NUMBER CLASS )RAMESHBHAI BABUBHAI RAMANI (INDIAN NATIONALS) AND SOLE PROPRIETOR OF JAY TIME INDUSTRIES (INDIAN PROPRIETORSHIP CONCERN) HAVING PLACE OF BUSINESS AT-6/4, GOKUL NAGAR, OPP: HARISHRAN WELDING, NEAR NATHJI PAN, 50 FEET ROAD, KOTHARIYA ROAD, RAJKOT-GUJARAT (INDIA) 05/07/2012 HANDLE DESIGN NUMBER CLASS )HARISH SACHDEV (AN INDIAN NATIONAL) TRADING AS M/S. PLASTIC KING INDUSTRIES, 117, GUPTA COMPOUND, NEAR JHOOLA HOUSE, PIPLIA RAO, A. B. ROAD, INDORE (M.P.) 05/07/2012 CONTAINER DESIGN NUMBER CLASS )A. O. SMITH INDIA WATER HEATING PRIVATE LIMITED, A COMPANY INCORPORATED UNDER THE LAWS OF INDIA, OF PLOT NO. 300, KIADB INDUSTRIAL AREA PHASE II, HAROHALLI, KANAKAPURA TALUK, RAMANAGARA DISTRICT, KARNATAKA , INDIA 13/07/2012 WATER HEATER The Patent Office Journal 01/02/

39 DESIGN NUMBER CLASS )ROYAL AUSTRALIAN MINT DENISON STREET, DEAKIN ACT 2604, AUSTRALIA 01/11/2011 CONTAINER FOR COIN DISPLAY PURPOSE /05/2011 AUSTRALIA DESIGN NUMBER CLASS )SATA GMBH & CO. KG DOMERTALSTRASSE 20, KORNWESTHEIM, GERMANY 13/02/2012 PROTECTIVE SUIT (SET) /08/2011 GERMANY DESIGN NUMBER CLASS )JOHN MEZZALINGUA ASSOCIATES, INC. 6176, EAST MOLLOY ROAD, EAST SYRACUSE, NEW YORK , USA 17/02/2012 COAXIAL CABLE CONNECTOR 29/399, /08/2011 U.S.A. The Patent Office Journal 01/02/

40 DESIGN NUMBER CLASS )SOCIÃ TÃ DES PRODUITS NESTLÃ S.A. A COMPANY INCORPORATED UNDER THE LAWS OF THE SWITZERLAND HAVING ITS REGISTERED OFFICE AT 1800 VEVEY, SWITZERLAND 24/05/2012 COFFEE MACHINE /02/2012 SWITZERLAND DESIGN NUMBER CLASS )VITRA PATENTE AG KLUNENFELDSTRASSE 22, CH-4132 MUTTENZ, SWITZERLAND 27/03/2012 BENCHE DESIGN NUMBER CLASS )DEERE & COMPANY ONE JOHN DEERE PLACE, MOLINE, ILLINOIS, , USA 27/04/2012 ROOF FOR AN OPERATOR STATION The Patent Office Journal 01/02/

41 DESIGN NUMBER CLASS )SIMPLEX TIMBER MART., (AN INDIAN SOLE PROPRIETORSHIP CONCERN), HAVING OFFICE AT 405, 16/B, KAPADIA NAGAR, C.S.T. ROAD, KURLA (WEST), MUMBAI MAHARASHTRA, INDIA. WHOSE PROPRIETOR IS EBRAHIM MOHAMMED KHAN. (INDIAN NATIONAL) OF ABOVE ADDRESS 29/06/2012 SIMPLEX TIMBER MART DESIGN NUMBER CLASS )TAHILIANI, DESIGN PVT LTD., 708, PACE CITY-2, SECTOR-37 PART-II, GURGAON (HARYANA) INDIA 14/10/2011 GARMENT DESIGN NUMBER CLASS )GODREJ & BOYCE MFG. CO. LTD. GODREJ INTERIO, PLANT 4, PIROJSHANAGER, VIKHROLI (WEST), MUMBAI , INDIA 10/04/2012 CHAIR The Patent Office Journal 01/02/

42 DESIGN NUMBER CLASS )GEISSEL INDIA PVT. LTD. C-4, M P SHAH MUNICIPALUDHYOG NAGAR SARU SECTION, ROAD 8, JAMNAGAR, GUJARAT, INDIA 11/04/2012 DOUBLE COMPRESSION CABLE GLAND DESIGN NUMBER CLASS )SHREE HARIKRUPA DIE CASTING K - 1, 242/17, B/4 MEL - TECH, NEAR TURBO BEARING, AJI VASAHAT GIDC, RAJKOT , GUJARAT, INDIA 16/04/2012 HANDLE DESIGN NUMBER CLASS )CHONGQING SOKON INDUSTRY GROUP STOCK CO. LTD., 61-1, JINQIAO ROAD, SHAPINGBO DISTRICT, CHONGQING, PEOPLE"S REPUBLIC OF CHINA 26/07/2011 VAN CN /02/2011 CHINA The Patent Office Journal 01/02/

43 DESIGN NUMBER CLASS )WEST PHARMACEUTICAL SERVICES, INC. 101 GORDON DRIVE, LIONVILLE, PA 19341, USA 05/03/2012 SYRINGE 29/402, /09/2011 U.S.A. DESIGN NUMBER CLASS )ELEGANZA JEWELLERY LTD. 102/103, SDF IV, S.E.E.P.Z., ANDHERI (E), MUMBAI , MAHARASHTRA, INDIA 15/03/2012 DIAMOND JEWELRY DESIGN NUMBER CLASS )WIPRO LIMITED, A COMPANY REGISTERED UNDER THE COMPANIES ACT 1956 HAVING ITS REGISTERED OFFICE AT THE DODDAKANNELLI, SARJAPUR ROAD, BANGALORE , KARNATAKA, INDIA 04/07/2012 FLUORESCENT LAMP The Patent Office Journal 01/02/

44 DESIGN NUMBER CLASS )(1) GOVINDBHAI MULJIBHAI BHOOT (2) DINESHBHAI MAGANBHAI CHORATIYA (BOTH PARTNERS ARE INDIAN NATIONAL) PARTNER OF SOMNATH METAL (INDIAN PARTNERSHIP FIRM) HAVING PLACE OF BUSINESS AT : 6, PATEL NAGAR, NR. BHALADA INDUSTRIES, 80 FEET ROAD, SORATHIAWADI, RAJKOT GUJARAT (INDIA) 05/07/2012 HANDLE DESIGN NUMBER CLASS )DILIPBHAI BACHUBHAI HIRPARA (INDIAN NATIONALS) AND SOLE PROPRIETOR OF JANKI DIE-CAST (INDIAN PROPRIETARY CONCERN) HAVING PLACE OF BUSINESS AT-PLOT NO. 834, AJI INDUSTRIAL AREA, NR; SITARAM WAY BRIDGE, OPP: MUNICIPAL WORKSHOP, BHAVNAGAR ROAD, RAJKOT-GUJARAT (INDIA) 19/07/2012 HANDLE DESIGN NUMBER CLASS )POLYSET PLASTICS PVT. LTD., INDIAN COMPANY REGISTERED UNDER THE INDIAN COMPANIES ACT, 1956, WHOSE ADDRESS IS 11-A, MEHTA INDUSTRIAL ESTATE, 1ST FLOOR, J. P. ROAD NO.2, GOREGAON (E), MUMBAI , MAHARASHTRA, INDIA 30/07/2012 CHAIR The Patent Office Journal 01/02/

45 DESIGN NUMBER CLASS )MANAK STEEL 14, PANCHAYAT WADI, NEAR KABUTARKHANA, BHULESWER, MUMBAI , MAHARASHTRA, INDIA 27/02/2012 OIL CONTAINER DESIGN NUMBER CLASS )TWOPAC AB, PER HÃ KANSSONS VÃ G 36, SE ESLÃ V, SWEDEN 21/05/2012 FEED ROLLER /11/2011 OHIM DESIGN NUMBER CLASS )SKY MARKETING, AN INDIAN PROPRIETORSHIP CONCERN OF NO. 10, PANCHANANTALA ROAD, BELGHARIA, KOLKATA , WEST BENGAL, INDIA, WHOSE PROPRIETOR IS RANJAN ROY OF THE SAME ADDRESS, AN INDIAN NATIONAL 06/08/2012 SHOE RACK The Patent Office Journal 01/02/

46 DESIGN NUMBER CLASS )PHOTOQUIP INDIA LTD. A-33, ROYAL INDUSTRIAL ESTATE, NAIGAON CROSS ROAD, WADALA, MUMBAI , MAHARASHTRA, INDIA 16/03/2012 TUBE LIGHT DESIGN NUMBER CLASS )AVERY DENNISON CORPORATION 150 NORTH ORANGE GROVE BLVD., PASADENA, CALIFORNIA 91103, UNITED STATES OF AMERICA 30/01/2012 RADIO FREQUENCY INDENTIFICATION DEVICE (RFID) 29/398, /08/2011 U.S.A. DESIGN NUMBER CLASS )ACCESS BUSINESS GROUP INTERNATIONAL LLC, 7575 FULTON STREET EAST, ADA, MICHIGAN 49355, U.S.A., A MICHIGAN LIMITED LIABILITY COMPANY 20/06/2012 LIPSTICK CONTAINER 29/409, /12/2011 U.S.A. The Patent Office Journal 01/02/

47 DESIGN NUMBER CLASS )MR. TULESHBHAI DAYALJIBHAI PATEL., AN INDIAN NATIONAL., HAVING ITS PRINCIPAL PLACE OF BUSINESS AT, Â ŒKRISHNAÂ, NR. ARYA DAIRY FARM, LEUVA PATEL BOARDING MAIN ROAD, MAVDI PLOT, RAJKOT, GUJARAT - INDIA 26/06/2012 HANDLE DESIGN NUMBER CLASS )SIMPLEX TIMBER MART., (AN INDIAN SOLE PROPRIETORSHIP CONCERN), HAVING OFFICE AT 405, 16/B, KAPADIA NAGAR, C.S.T. ROAD, KURLA (WEST), MUMBAI MAHARASHTRA, INDIA. WHOSE PROPRIETOR IS EBRAHIM MOHAMMED KHAN. (INDIAN NATIONAL) OF ABOVE ADDRESS 29/06/2012 LADDER DESIGN NUMBER CLASS )TAHILIANI, DESIGN PVT LTD., 708, PACE CITY-2, SECTOR-37 PART-II, GURGAON (HARYANA) INDIA 14/10/2011 GARMENT The Patent Office Journal 01/02/

48 DESIGN NUMBER CLASS )SPEEDEX BATTERIES 4810, GALI MITRA, ROSHANARA ROAD, DELHI , INDIA 04/04/2012 TORCH DESIGN NUMBER CLASS )AMRAPALI PLASTIC INDUSTRIES 5, RASIK APPARTMENT, OFF. AAREY ROAD, GOREGAON (EAST), MUMBAI , MAHARASHTRA, INDIA 11/04/2012 HANDLE FOR UTENSILS DESIGN NUMBER CLASS )LAURASTAR S.A. ROUTE DE PRA DE PLAN 18, CH-1618 CHÃ TEL-ST-DENIS, SWITZERLAND 16/04/2012 STEAM GENERATOR IRONING SYSTEM DM/ /10/2011 WIPO The Patent Office Journal 01/02/

49 DESIGN NUMBER CLASS )HUNTER PACIFIC INTERNATIONAL PTY LTD, OF BUILDING 8, 256 NEW LINE ROAD, NEW LINE BUSINESS PARK, DURAL NSW 2158, AUSTRALIA; NATIONALITY: AUSTRALIAN 01/06/2012 ELECTRICAL CONNECTOR 15613/ /12/2011 AUSTRALIA DESIGN NUMBER CLASS )CLABER S.P.A. VIA PONTEBBANA, 22, FIUME VENETO (PN), ITALY 05/03/2012 PROGRAMMABLE CONTROL UNIT FOR A WATERING SYSTEM /09/2011 OHIM DESIGN NUMBER CLASS )FLUID MANAGEMENT OPERATIONS LLC, A US LIMITED LIABILITY COMPANY OF 1023 WHEELING ROAD, WHEELING ILLINOIS 60090, UNITED STATES OF AMERICA 04/07/2012 FLUID DISPENSING SYSTEM /01/2012 OHIM The Patent Office Journal 01/02/

50 DESIGN NUMBER CLASS )MICROSOFT CORPORATION, (A CORPORATION OF THE STATE OF WASHINGTON) OF ONE MICROSOFT WAY, REDMOND, WASHINGTON, 98052, U.S.A., AMERICAN COMPANY 25/07/2012 ELECTRONIC MOUSE 29/ /03/2012 U.S.A. N NUMBER CLASS )PREMEC S.A., VIA INDUSTRIA, 6814 CADEMPINO, SWITZERLAND 27/07/2012 WRITING INSTRUMENT /03/2012 OHIM The Patent Office Journal 01/02/

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 2

CONTINUED FROM PART 2 CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 2

CONTINUED FROM PART 2 CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 3

CONTINUED FROM PART 3 CONTINUED FROM PART 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 3 INTRODUCTION

CONTINUED FROM PART- 3 INTRODUCTION CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 2 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART-1

CONTINUED FROM PART-1 CONTINUED FROM PART-1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Range : 7.5kW to 630/800kW

Range : 7.5kW to 630/800kW Range : 7.5kW to 630/800kW ATS 48 PRESENTATION Altistart 48 is a high performance soft starter using 6 thyristors for controlled starting of 3 phase asynchronous squirel cage induction motors. It provides

More information

CONTINUED FROM 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published in

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 3 INTRODUCTION

CONTINUED FROM PART- 3 INTRODUCTION CONTINUED FROM PART- 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Maximum retail price list. For SIBCO range of bearing housings and accessories Bearing housings, sleeves, locknuts, lock washers and locating rings

Maximum retail price list. For SIBCO range of bearing housings and accessories Bearing housings, sleeves, locknuts, lock washers and locating rings Maximum retail price list For SIBCO range of bearing housings and accessories Bearing housings, sleeves, locknuts, lock washers and locating rings Effective from 1 st April, 2017 Engineered for optimized

More information

CONTINUED FROM PART- 1 INTRODUCTION. Journal of The Patent Office. This Journal is being published on weekly basis on every Friday

CONTINUED FROM PART- 1 INTRODUCTION. Journal of The Patent Office. This Journal is being published on weekly basis on every Friday CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1

CONTINUED FROM PART- 1 CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 2 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

AUTHORITY FOR ADVANCE RULINGS (INCOME TAX)

AUTHORITY FOR ADVANCE RULINGS (INCOME TAX) DATE: 26.12.2016 (Monday) 1 AAR/971/2010 LG Electronics India Pvt. Ltd.,Greater Noida (UP) S245R(2) CIT (IT), Noida 2 AAR/1064/2011 The Goodyear Tire & Rubber Company, USA S245R(2) CIT(IT) - 2, ND 3 AAR/1214/2011

More information

Kare Zindagi Instant Start

Kare Zindagi Instant Start Kare Zindagi Instant Start KIND ATTENTION t In event of any particular model being phased out or out of stock, the Company reserves the right to provide another equivalent model of same capacity best

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

HT, LT U.G. cables & PVC insulated Al wire

HT, LT U.G. cables & PVC insulated Al wire HT, LT U.G. cables & PVC insulated Al wire Sl.No Name of the firm s particulars Valid upto 1 M/s. Gloster s Ltd., Kallakal(Vi), Toopran(MN), Medak district, Andra Pradesh ( Ph No: 91-80-2372 2274,2837

More information

One machine multiple applications.

One machine multiple applications. One machine multiple applications. image 1 image 2 image 3 image 4 Manufacturing of engineering plastics. Processing of PVC. Manufacturing of TPE. Manufacturing of master batches. Coperion worldwide. >

More information

CONTINUED FROM PART 1

CONTINUED FROM PART 1 CONTINUED FROM PART 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Export Oriented Enterprises (EOE) 1st Quarter Introduction This issue of Economic and Social Indicators (ESI) presents the results of the

Export Oriented Enterprises (EOE) 1st Quarter Introduction This issue of Economic and Social Indicators (ESI) presents the results of the Export Oriented Enterprises (EOE) 1st Quarter 2018 1. Introduction This issue of Economic and Social Indicators (ESI) presents the results of the Quarterly Survey of Employment among Export Oriented Enterprises

More information

Export Oriented Enterprises (EOE) 3 rd Quarter Introduction This issue of Economic and Social Indicators (ESI) presents the results of the

Export Oriented Enterprises (EOE) 3 rd Quarter Introduction This issue of Economic and Social Indicators (ESI) presents the results of the Export Oriented Enterprises (EOE) 3 rd Quarter 2017 1. Introduction This issue of Economic and Social Indicators (ESI) presents the results of the Quarterly Survey of Employment among Export Oriented Enterprises

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Export Oriented Enterprises (EOE) 2nd Quarter 2018

Export Oriented Enterprises (EOE) 2nd Quarter 2018 Export Oriented Enterprises (EOE) 2nd Quarter 2018 1. Introduction This issue of Economic and Social Indicators (ESI) presents the results of the Quarterly Survey of Employment among Export Oriented Enterprises

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Python XL-DA Series Pumps. Pneumatically Operated Double Acting Pumps for Chemical Injection

Python XL-DA Series Pumps. Pneumatically Operated Double Acting Pumps for Chemical Injection Python XL-DA Series Pumps Pneumatically Operated Double Acting Pumps for Chemical Injection Python XL-DA Pneumatically Operated Pumps Features and Benefits Python XL-DA series pumps are suitable for chemical

More information

Setting a New Standard in Emission Testing MOTOR EXHAUST GAS ANALYZER TEST SYSTEM CONCEPT MEXA-ONE offers an intuitive user interface with a highly efficient hardware and software design. This results in

More information

Pioneer P750/49. The Premium 750 KW Wind Turbine. green. pioneer. go go with

Pioneer P750/49. The Premium 750 KW Wind Turbine. green. pioneer. go go with Pioneer P750/49 The Premium 750 KW Wind Turbine green go go with pioneer Transforming the Power of Wind Corporate Profile Pioneer Wincon Private Limited (PWPL) is a member company of the Pioneer Asia Group

More information

Steam Valves with Rotary Actuators

Steam Valves with Rotary Actuators Steam Valves with Rotary Actuators Technical Databook Version 3.1 Belimo Asia Pacific Steam Valve Product overview 2-way Steam Valves DN15...80 Equal-percentage characteristics for modulating control of

More information

Price List. Power Factor. With effect from June 15, Correction Products. With effect from January 03, 2012

Price List. Power Factor. With effect from June 15, Correction Products. With effect from January 03, 2012 Price List Power Factor With effect from June 15, 2011 With effect from January 03, 2012 Price List Contents Power factor correction b Box Type 440V Range.............................. 1 b Can Type 440V

More information

Catalog. Classiq range Wiring accessories

Catalog. Classiq range Wiring accessories Catalog Classiq range Wiring accessories Introduction to ABB ABB Group ABB (www.abb.com) is a leader in power and automation technologies that enable utility and industry customers to improve performance

More information

H2R and H2L Cable Reel

H2R and H2L Cable Reel c Installation Service and Parts Manual H2R and H2L Cable Reel Serial Numbers 678971 through 678972 Part Number 679932-R1 cascade corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207

More information

SPnorm & SPbloc Self Priming Centrifugal Pumps

SPnorm & SPbloc Self Priming Centrifugal Pumps SPnorm & SPbloc Self Priming Centrifugal Pumps SPbloc SPbloc SPnorm SPnorm & SPbloc Self Priming Centrifugal Pumps SPnorm & SPbloc - Self Priming Centrifugal Pumps Design SPnorm: Horizontal self priming

More information

D6..M.. Butterfly Valves

D6..M.. Butterfly Valves D6..M.. Butterfly Valves Technical Databook Ver. Version 2 2.0 Belimo Asia Pacific D6..MH/MW Series Butterfly Valves Trade Selection by Belimo 2-way Butterfly Valves flanged DN50...500 For Open/Close or

More information

AEM. Automated Electrified Monorail Systems. Fast, Quiet, Clean & Reliable Material Handling

AEM. Automated Electrified Monorail Systems. Fast, Quiet, Clean & Reliable Material Handling AEM Automated Electrified Monorail Systems Fast, Quiet, Clean & Reliable Material Handling Bi-directional carriers individually powered by track mounted electrification AEM Clean, Quiet and Fast LOAD CAPACITIES

More information

Catalog. Low voltage General performance IE3 efficiency cast iron motors

Catalog. Low voltage General performance IE3 efficiency cast iron motors Catalog Low voltage General performance IE3 efficiency cast iron motors ABB Motors and Generators I Low voltage general performance IE3 efficiency motors 2 General performance IE3 efficiency cast iron

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Installation Instructions

Installation Instructions c Installation Instructions Mark Radio Frequency (RF) Hydraulic Control Kit 6819446 This sheet provides installation instructions for the truck mounted component and replacement parts list for Cascade

More information

Airetool. Gas Line Cleaners Range: 3/4 (19.05mm) to 1-1/2 (38.10mm) Operating & Service Manual PL EN 10/01/2015

Airetool. Gas Line Cleaners Range: 3/4 (19.05mm) to 1-1/2 (38.10mm) Operating & Service Manual PL EN 10/01/2015 Operating & Service Manual PL9-6026EN 0/0/205 Airetool Gas Line Cleaners Range: 3/4 (9.05mm) to -/2 (38.0mm) For additional product information visit our website at http://www.apextoolgroup.com PL9-6026EN

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Gemini Power Hydraulics

Gemini Power Hydraulics Introducing Gemini Power Hydraulics A trusted name in India for work saving tools & equipments For more than 25 years, we have helped business across India save work and increase productivity by providing

More information

15K Series Extented Mini Right Angle Drill Attachment

15K Series Extented Mini Right Angle Drill Attachment Parts Manual PL30-2052EN 15K27-5172 Series Extented Mini Right Angle Drill Attachment For additional product information visit our website at http://www.apextoolgroup.com PL30-2052EN Dotco Nomenclature

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

You ll find many Tsubaki products being

You ll find many Tsubaki products being You ll find many Tsubaki products being There are many processes involved in making a motor vehicle. You ll find Tsubaki products in all of these processes, from conveying vehicle bodies from the stockyard,

More information

10LF and 12LF Series Right Angle Grinders

10LF and 12LF Series Right Angle Grinders Product Manual 10LF and 12LF Series Right Angle Grinders XX L F 2 XX - XX Tool Series 10 = Aluminum Housing 12 = Ergo Housing Throttle Type L = Locking Lever Motor Size F = 0.4 hp Handle Style 2 = Right

More information

CONTINUED FROM PART 2

CONTINUED FROM PART 2 CONTINUED FROM PART 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Wolverine. DA Series Pumps. Electrically Operated Double Acting Pumps for Chemical Injection

Wolverine. DA Series Pumps. Electrically Operated Double Acting Pumps for Chemical Injection Wolverine DA Series Pumps Electrically Operated Double Acting Pumps for Chemical Injection Wolverine DA Electrically Operated Pumps Features and Benefits The Wolverine DA uses a double acting pump fluid

More information

HRC Fuse-links Bolted Type HG 2 A - 32 A HQ 2 A A

HRC Fuse-links Bolted Type HG 2 A - 32 A HQ 2 A A HRC Fuse-links Bolted Type HG 2 A - 2 A - 630 A HRC Fuse-links Bolted Type Larsen & Toubro Limited, India s largest manufacturer of low tension switchgear, offers FN range of SDFs suitable for Bolted Type

More information

15D Series Pistol Grip and Inline Drills

15D Series Pistol Grip and Inline Drills Parts Manual 823144EN 15D Series Pistol Grip and Inline Drills For additional product information visit our website at http://www.apextoolgroup.com 823144EN Cleco Product Information The original language

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2 INTRODUCTION

CONTINUED FROM PART- 2 INTRODUCTION CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART 3

CONTINUED FROM PART 3 CONTINUED FROM PART 3 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

10R90 Series Light Duty Precision Turbine Grinder

10R90 Series Light Duty Precision Turbine Grinder Parts Manual 45-8043 10R90 Series Light Duty Precision Turbine Grinder CAUTION Do Not Lubricate This Tool! For additional product information visit our website at http://www.apextoolgroup.com 45-8043 Dotco

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

DC MOTORS. Crompton Greaves EVERYDAY SOLUTIONS

DC MOTORS. Crompton Greaves EVERYDAY SOLUTIONS Crompton Greaves EVERYDAY SOLUTIONS DC MOTORS LT MOTORS DIVISION A - 6/2, M.I.D.C., AHMEDNAGAR - 414111. MAHARASHTRA. TEL : +91 (0241) 2776 151-154, 2776146, 2776187. FAX : +91 (0241) 2777508 INTRODUCTION

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Parts Manual EN PL30-12R04 07/21/ R04 Series 0.1 HP Inline Pencil Grinder

Parts Manual EN PL30-12R04 07/21/ R04 Series 0.1 HP Inline Pencil Grinder Parts Manual PL30-12R04 12R04 Series 0.1 HP Inline Pencil Grinder For additional product information visit our website at http://www.apextoolgroup.com Dotco Nomenclature 12 R 04 XX - X X Series 12 = Ergo

More information

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008,

CONTINUED FROM PART- 1 INTRODUCTION. In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

CONTINUED FROM PART- 2

CONTINUED FROM PART- 2 CONTINUED FROM PART- 2 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Switch-Disconnector-Fuse HRC Fuse-links Bolted Type

Switch-Disconnector-Fuse HRC Fuse-links Bolted Type Switch-Disconnector-Fuse HRC Fuse-links Bolted Type HRC Fuse-links Bolted Type Larsen & Toubro Limited, India s largest manufacturer of low tension switchgear, offers new FN range of SDFs suitable for

More information

Installation Instructions

Installation Instructions c Installation Instructions C-Series Integral Sideshifter & K-Series Fork Positioner Installation Kits for Toyota Masts This sheet provides installation instructions for Cascade Installation Kits. Each

More information

Installation Instructions

Installation Instructions c Installation Instructions Flow Control s This sheet provides installation instructions and replacement parts list for Cascade Flow Control s. The valve reduces the flow rate to the attachment and returns

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information

Installation Instructions

Installation Instructions c Installation Instructions Light Kits for Three-Position Pressure Relief Valve 0 This manual provides installation instructions for, or Kits used with -Position Pressure Relief Valve 0. The switch box

More information

BTS Fair of Shoes, Leather & Leather Goods in Poznan, Poland- August 29th to 31st A Report by Dr. Debasis De, Asst.

BTS Fair of Shoes, Leather & Leather Goods in Poznan, Poland- August 29th to 31st A Report by Dr. Debasis De, Asst. BTS Fair of Shoes, Leather & Leather Goods in Poznan, Poland- August 29th to 31st 2016. A Report by Dr. Debasis De, Asst. Director, CLE-ER Poland (Republic of Poland) is one of the countries in Central

More information

CONTINUED FROM PART- 1 INTRODUCTION

CONTINUED FROM PART- 1 INTRODUCTION CONTINUED FROM PART- 1 INTRODUCTION In view of the recent amendment made in the Designs (Amendment) Rules, 2008 with effect from 17/06/2008, Publication of the matter relating to Designs is being published

More information