Variable speed drives
|
|
|
- Milton Skinner
- 6 years ago
- Views:
Transcription
1 5 192 Variable speed drives SED2 Variable speed drives for speed control of three-phase a.c. motors actuating fans or pumps. Range: 0.75 kw to 90 kw for IP20/21 version, 1.1 kw to 90 kw for IP54 version. Voltage range: 208 V to 240 V / 380 V to 500 V / 525 V to 575 V. Freely programmable I/Os Integrated PID controller Integrated HV functions Use The SED2 variable speed drive is used for energy-optimized speed control of pump and fan motors in HV applications: Demand-controlled speed control for supply and exhaust air fans in air handling systems. Demand-controlled speed control for primary and secondary pumps in heating systems. VV plants. ooling tower fans. ondensate pumps. M1N5192en Siemens uilding Technologies HV Products
2 Product documentation Operating instructions M1U5192 The operating instructions are added to the product and contain all information required to install and commission the variable speed drives of type SED2. Engineering manual M1J5192 Getting started guide M1G5192X The engineering manual is designed for plant design and contains all information required to select the appropriate SED2 variable speed drive and the associated options. The "Getting started" guide is a short guide in the form of a D booklet; it contains all notes and parameters necessary to configure the SED2 based on the factory settings. Type summary Type codes SED2-aaaa/bcd SED2 -aaaa b c d ST variable speed drive of the 2 nd generation Power [kw] Voltage range IP Filter 2 = V 2 = 20 X = unfiltered 3 = V 5 = 54 4 = V = lass filter omplete type summary See the tables in section SED2 type summary on page 9. ccessories ccessories OP (asic Operator Panel) OP (dvanced Operator Panel) EM filter, frame size EM filter, frame size EM filter, frame size, 200 to 240 V EM filter, frame size, 380 to 480 V Gland plate, frame size Gland plate, frame size Gland plate, frame size OP/OP door mounting set for 1 VSD OP/OP door mounting set for several VSDs P SED2 connection set P OP connection set Order number SN SED2-OP1 SED2-OP1 SED2-FLTR- SED2-FLTR- SED2-FLTR--L SED2-FLTR--H SED2-GL- SED2-GL- SED2-GL- SED2-DOOR-KIT1 SED2-DOOR-KIT2 SED2-P-KIT SED2-P-OP-KIT Equipment combinations The DESIGO I/O-Open interface module PTE.SED.SS enables easy system integration. Refer to the respective data sheet for further information. The data sheet is scheduled for publication in the third quarter of /12
3 Technical data Environmental conditions Power Storage temperature -40 to +70 Operating temperature for all types -10 to +40 Humidity 95% relative humidity Non-condensing. ltitude Up to 1000 meters above sea level without performance reduction Operating voltage 3 x V ±10% 3 x V ±10% 3 x V ±10% Input frequency Hz Switch-on current Nominal input current Power factor 0.7 Efficiency 96 97% Output frequency Hz Overload capacity 110 % periodic overload capacity for 60 s within 5 minutes relative to the nominal output current. Power range See section SED2 type summary. Switching frequency 4 khz to 16 khz (2 khz steps) Functions ontrol unit Protection functions HV functions Fixed frequencies Masking frequencies Setpoint resolution Protection against: Undervoltage, overvoltage ground fault, short circuit, rotor jam, motor and drive overtemperature PID controller for speed, pressure, and temperature control. elt failure detection with and without sensor. Staging of pumps or fans. Variable speed drive bypass. 15, programmable 4, programmable 0.01 Hz digital 10 bit analog Inputs Outputs 2 analog inputs: IN1, IN2 0/2 to 10 V or 0/4 to 20m, changeover possible (programmable scaling), configurable for direct connection of an LG-Ni 1000 temperature sensor. 6 digital inputs: DIN1 to DIN6 20 configurable functions Potential-free, expandable to 8 inputs by reconfiguring the 2 analog inputs. Switchable polarity: active low/ active high. Switching threshold: <3 V low, >3 V high. Input current min. 6 m at 15 V, aim: 8 m. input voltage: 33 V. 2 analog outputs: OUT1, OUT2 0/2 to 10 V or 0/4 to 20 m, changeover possible (programmable scaling). Output impedance: 1 kω 2 relays Programmable. 1 potential-free changeover contact each. contact rating: D 30 V, V, 2 uxiliary supply 24 V Galvanically separated, unregulated auxiliary supply (18 to 32 V), 50 m. Interface Degree of protection of housing Standards Serial interface Degree of protection as per EN Product safety Safety of machinery; electrical equipment of machines Semiconductor converters. General requirements and line commutated converters RS 485, (RS 232 optional with converter). Protocols: USS, P1, and N2. USS transmission rate up to 38.4 kaud (default 9.6 kaud) See section SED2 type summary EN EN /12
4 Electromagnetic compatibility EM emissions djustable speed electrical power drive systems Part 3: EM product standard including specific test methods E conformity Electromagnetic compatibility Low voltage directive UL EN class The variable speed drives are equipped with a default EM class filter. EN /336/EE 73/23/EE UL and cul approval for current transformers. 533 for use in the working environment having pollution degree /12
5 Internal diagram V V V 3 D/R+ D/+ L1 L2 L3PE L1 L2 L3 PE -Filter U V W PE PE M VD + 0 VD LG-Ni 1000 V: 0-10 V 2-10 V I: 0-20 m 4-20 m 4 3 IN1 2 0 V 11 / D D / D / 12 OUT OUT2 27 V: 0-10 V 2-10 V I: 0-20 m 4-20 m V: 0-10 V 2-10 V I: 0-20 m 4-20 m LG-Ni 1000 V: 0-10 V 2-10 V I: 0-20 m 4-20 m 10 IN2 2 0 V / D Relay Output 1 Isolated 0 V (output) Isolated 50 m@ VD (output) DIN 1 DIN 2 DIN 3 DIN 4 DIN 5 opto isolated PU Relay Output 2 16 DIN 6 17 Motor PT OP (Standard) OP (Optional) RS en 5/12
6 Dimensions of SED2 drives with IP20/NEM 0 rating Dimensions of SED2 frame sizes to Dimensions J J s and Dimensions of SED2 footprint filters for frame sizes to Dimensions in mm G H I J K K I K I G J H J H G 5192J J04 Filter for frame size Filter for frame sizes and 6/12
7 Dimensions of SED2 frame sizes D to F IP20 / NEM 0 Dimensions in mm D E F 850 (with filter 1150) J05 Dimensions of SED2 drives with IP54/NEM 12 rating Dimensions of SED2 frame sizes and Dimensions in mm J06 7/12
8 Dimensions of SED2 frame sizes D to F / IP54 Dimensions in mm D E F J07 8/12
9 SED2 type summary Output power (variable torque) IP code 200 V to 240 V, ± 10%, 3 phases / IP20 Filter class input current 3 phases output current Weight kw hp IP kg Type (SN) SED2-0.37/ SED2-0.55/ SED2-0.75/ SED2-1.1/ SED2-1.5/ SED2-2.2/ SED2-3/ SED2-4/ SED2-5.5/ SED2-7.5/ D 17 SED2-11/ D 17 SED2-15/ D 17 SED2-18.5/ E 22 SED2-22/ E 22 SED2-30/ F 75 SED2-37/ F 75 SED2-45/ unfiltered SED2-0.37/22X unfiltered SED2-0.55/22X unfiltered SED2-0.75/22X unfiltered SED2-1.1/22X unfiltered SED2-1.5/22X unfiltered SED2-2.2/22X unfiltered SED2-3/22X unfiltered SED2-4/22X unfiltered SED2-5.5/22X unfiltered SED2-7.5/22X unfiltered D 16 SED2-11/22X unfiltered D 16 SED2-15/22X unfiltered D 16 SED2-18.5/22X unfiltered E 20 SED2-22/22X unfiltered E 20 SED2-30/22X unfiltered F 56 SED2-37/22X unfiltered F 56 SED2-45/22X 9/12
10 Output power (variable torque) IP code Filter class 380 V to 480 V, ± 10%, 3 phases input current 3 phases output current Weight kw hp IP kg Type (SN) SED2-0.37/ SED2-0.55/ SED2-0.75/ SED2-1.1/ SED2-1.5/ SED2-2.2/ SED2-3/ SED2-4/ SED2-5.5/ SED2-7.5/ SED2-11/ SED2-15/ D 17 SED2-18.5/ D 17 SED2-22/ D 17 SED2-30/ E 22 SED2-37/ E 22 SED2-45/ F 75 SED2-55/ F 75 SED2-75/ F 75 SED2-90/ unfiltered SED2-0.37/32X unfiltered SED2-0.55/32X unfiltered SED2-0.75/32X unfiltered SED2-1.1/32X unfiltered SED2-1.5/32X unfiltered SED2-2.2/32X unfiltered SED2-3/32X unfiltered SED2-4/32X unfiltered SED2-5.5/32X unfiltered SED2-7.5/32X unfiltered SED2-11/32X unfiltered SED2-15/32X unfiltered D 16 SED2-18.5/32X unfiltered D 16 SED2-22/32X unfiltered D 16 SED2-30/32X unfiltered E 20 SED2-37/32X unfiltered E 20 SED2-45/32X unfiltered F 56 SED2-55/32X unfiltered F 56 SED2-75/32X unfiltered F 56 SED2-90/32X 10/12
11 Output power (variable torque) IP code Filter class 380 V to 480 V, ± 10%, 3 phases input current 3 phases output current Weight kw hp IP kg Type (SN) SED2-1.1/ SED2-1.5/ SED2-2.2/ SED2-3/ SED2-4/ SED2-5.5/ SED2-7.5/ SED2-11/ SED2-15/ D 35 SED2-18.5/ D 35 SED2-22/ D 35 SED2-30/ E 48 SED2-37/ E 48 SED2-45/ F 99 SED2-55/ F 99 SED2-75/ F 99 SED2-90/ unfiltered SED2-1.1/35X unfiltered SED2-1.5/35X unfiltered SED2-2.2/35X unfiltered SED2-3/35X unfiltered SED2-4/35X unfiltered SED2-5.5/35X unfiltered SED2-7.5/35X unfiltered SED2-11/35X unfiltered SED2-15/35X unfiltered D 35 SED2-18.5/35X unfiltered D 35 SED2-22/35X unfiltered D 35 SED2-30/35X unfiltered E 48 SED2-37/35X unfiltered E 48 SED2-45/35X unfiltered F 81 SED2-55/35X unfiltered F 81 SED2-75/35X unfiltered F 81 SED2-90/35X 11/12
12 500 V to 600 V, ± 10%, 3 phases Output power (variable torque) IP code Filter class input current 3 phases output current Weight kw hp IP kg Type (SN) unfiltered SED2-0.75/42X unfiltered SED2-1.1/42X unfiltered SED2-1.5/42X unfiltered SED2-2.2/42X unfiltered SED2-3/42X unfiltered SED2-4/42X unfiltered SED2-5.5/42X unfiltered SED2-7.5/42X unfiltered SED2-11/42X unfiltered SED2-15/42X unfiltered D 16 SED2-18.5/42X unfiltered D 16 SED2-22/42X unfiltered D 16 SED2-30/42X unfiltered E 20 SED2-37/42X unfiltered E 20 SED2-45/42X unfiltered F 56 SED2-55/42X unfiltered F 56 SED2-75/42X unfiltered F 56 SED2-90/42X unfiltered SED2-1.1/45X unfiltered SED2-1.5/45X unfiltered SED2-2.2/45X unfiltered SED2-3/45X unfiltered SED2-4/45X unfiltered SED2-5.5/45X unfiltered SED2-7.5/45X unfiltered SED2-11/45X unfiltered SED2-15/45X unfiltered D 35 SED2-18.5/45X unfiltered D 35 SED2-22/45X unfiltered D 35 SED2-30/45X unfiltered E 48 SED2-37/45X unfiltered E 48 SED2-45/45X unfiltered F 81 SED2-55/45X unfiltered F 81 SED2-75/45X unfiltered F 81 SED2-90/45X 12/ Siemens uilding Technologies Ltd. Subject to change
HVAC Products. Introducing the SED2 Variable Frequency Drives
HVAC Products Introducing the SED2 Variable Frequency Drives Designed Specifically for HVAC Applications From a global leader in drives technology and innovation, now comes a drive specifically configured
SED2. Variable Frequency Drives. with Conventional Bypass Options. Variable Frequency Drives. Description. Features F-9.
SED2 with Conventional Bypass Options Important Note: VD products are only available through authorized distribution channels. To locate an authorized distributor, please contact a Siemens Building Technologies
SED2 VFD NEMA Type 3R and Type 3R Harsh Environment (3RHE) Bypass
SED2 VD NEMA Type 3R and Type 3R Harsh Environment (3RHE) Bypass Description The NEMA Type 3R Bypasses are companion packages for the family of SED2 Variable requency Drives (VD). NEMA Type 3R/3RHE enclosed
sinamics SINAMICS G110 Variable Speed Drives 0.12 kw to 3 kw SINAMICS G110 Short Form 2004
Variable Speed Drives 0.12 kw to 3 kw Short Form 2004 sinamics SINAMICS Variable Speed Drives 0.12kW to 3kW Product Information Pricing The is a Variable Speed Drive with basic functions for a variety
Low voltage AC drives
General machinery drives Main features and dimensions Unique features Fast and extensive I/O PID control Application macros Many installation possibilities 200 to 480 V, 1-phase or 3-phase More value for
MICRO MASTER MICRO MASTER Vector MIDI MASTER Vector
Standard Drives 1 W to kw VECTOR CONTROL SENSORLESS , and : The facts about the favourites Worldwide voltage ranges for a global product 1/3 phase 8-2 V AC % 3 phase 0-0 V AC % 3 phase 0-5 V AC % Greater
825-P Modular Protection System for motors Specification Guide
Specification Guide 1.0 General 1.01 The motor protection relay shall have a current operating range of 0.5 and 5000 amperes. 1.02 The motor protection relay shall provide current measurement-based protection
SINAMICS G110 Inverter chassis units 0.12 kw to 3 kw
Siemens AG 007 Inverter chassis units 0.1 kw to 3 kw / chassis units / Overview / Benefits /3 /3 Application /3 Design /3 Function /4 Technical specifications /8 Selection and ordering data /9 Accessories
VSD Series II Variable Speed Micro Drives
VSD Series II Variable Speed Micro Drives Product Bulletin Code No. LIT-12011813 Issued March 26, 2013 Refer to the QuickLIT website for the most up-to-date version of this document. Johnson Controls VSD
The smd frequency inverter Compact, powerful, without compromise simply smart
The smd frequency inverter Compact, powerful, without compromise simply smart smart micro drive The compact smd for large tasks 2 Do you work with digital and analog inputs, preset speeds or a display
ecotrans Lf 01/02 Microprocessor Transmitter / Switching Device for Conductivity
Data Sheet 20.27 Page / ecotrans Lf 0/02 Microprocessor Transmitter / Switching Device for Conductivity Type 2027 Housing for DIN rail mounting (5 x 7.5 mm to EN 0 75 A.) Brief description The JUMO ecotrans
INVEOR "Smart connections." on five levels
INVEOR "Smart connections." on five levels 1 The Inveor 3 Operation and observation IP65 protection class Integrated soft PLC Pre-fitted cable glands Fan-free design up to 7.5 kw Robust and vibration-resistant
JC-VSD FP Series II Drives Product Bulletin 1
JC-VSD FP Series II Drives Product Bulletin Code No. LIT-12012081 Issued May 2017 The Johnson Controls VSD FP Series II provides the advanced technology and features of the Johnson Controls VSD Series
A. Provide variable frequency drives to operate variable torque loads as shown on the Drawings and as specified herein.
DIVISION 23 HEATING, VENTILATING, AND AIR CONDITIONING (HVAC) SECTION 23 90 71 PART 1 GENERAL 1.01 DESCRIPTION A. Provide variable frequency drives to operate variable torque loads as shown on the Drawings
2.3. Adjustable Frequency Drives. Contents. Standards and Certifications
Contents Selection................ Product Selection....................... Accessories........................... Technical Data and Specifications.......... Dimensions........................... Page
IRT 4000 AT-S/M/L. Technical Manual. quality IN MOTION. quality IN MOTION
IRT quality IN MOTION www.irtsa.com 4000 AT-S/M/L Technical Manual IRT quality IN MOTION E2 0 8 4 1 5 September 2013-Rev. 5 UL Requirements Drives Series 2000 / 4000 AT 1. Field wiring terminal to use
Lexium integrated drives
Description ILp for CANopen, PROFIBUS DP, RS ILE with brushless DC motor Description ILE comprise control electronics with a fieldbus interface for CANopen DS, PROFIBUS DP or RS and a brushless DC motor.
J1000. Compact Inverter Series.
J1000 Compact Inverter Series www.yaskawa.eu.com Focus on Application Customer orientation and application focus two attributes of machine equipment YASKAWA offers with its J1000 compact inverter drive
Delta Products VFD CP2000 Bypass Control Packages.
Delta Products VFD CP2000 Bypass Control Packages www.deltaww.com Delta Products VFD CP2000 Bypass Control Packages The Delta Products VFD CP2000 Bypass Control Packages are designed for the Delta Products
We reserve the right to alter data according to improvements made. Previous documents become invalid with the issue of this document.
General information Actuator controls AC 01.2 for controlling multi-turn actuators of the SA/SAR type range and part-turn actuators of the SQ/SQR.2 type range. Features and functions Power supply Standard
SINAMICS SM150. 4/2 Overview. 4/2 Benefits. 4/2 Design. 4/6 Function. 4/8 Selection and ordering data. 4/8 Options
/2 Overview /2 Benefits /2 Design /6 Function /8 Selection and ordering data /8 Options Technical data /1 General technical data /15 Control properties /15 Ambient conditions /16 Installation conditions
micromaster Catalog DA MICROMASTER 410/420/430/440 Inverters 0.12 kw to 250 kw
micromaster Catalog DA 51.2 2002 MICROMASTER 410/420/430/440 Inverters 0.12 kw to 250 kw Catalogs of the Business Unit Standard Drives MICROMASTER 410/420/430/440 Inverters DA 51.2 Order No.: German: E86060-K5151-A121-A3
REGAL-BELOIT SpinMaster AC Adjustable Speed Drives
REGAL-BELOIT SpinMaster Volts/Hertz Constant Torque, Micro Inverter Applications: Constant torque or constant horsepower applications. Typical applications include conveyors, packaging machinery, machine
Burden Fuse Rating Resistor SAF / SAK6 1NM 10mm M8 12NM SAF / SAK10 2NM 16mm M8 12NM
Contents Section Page 1.0 Introduction 1 2.0 Specification 1-4 3.0 Installation 5-8 4.0 Programming 9-10 5.0 Menus 10-12 6.0 Fault Finding/Diagnostics 12-13 7.0 Communication 13 8.0 Setting Up 13-16 1.0
SmartVFD HVAC FEATURES APPLICATION SPECIFICATION DATA
SmartVFD HVAC APPLICATION The SmartVFD HVAC is a variable frequency drive designed for use in HVAC application to control the speed of HVAC pumps and fans in order to maximize energy efficiency. Smart
ABB component drives ACS150, 0.5 to 5 Hp
ABB component drives ACS150, 0.5 to 5 Hp Technical Catalog BUSINESS PROFILE INDUSTRIES PRODUCTS APPLICATIONS EXPERTISE PARTNERS SERVICES Contents Choice 1: Simply contact your local ABB drives sales office
Lexium integrated drives
Description ILp for DeviceNet, EtherCAT, Modbus TCP, ILE with brushless DC motor Description ILE comprise control electronics with a fieldbus interface for DeviceNet, EtherCAT, Modbus TCP or and a brushless
Observe all necessary safety precautions when controlling the soft starter remotely. Alert personnel that machinery may start without warning.
Introduction OPERATING INSTRUCTIONS: MCD REMOTE OPERATOR Order Codes: 175G94 (for MCD 2) 175G361 + 175G9 (for MCD 5) 175G361 (for MCD 3) 1. Introduction 1.1. Important User Information Observe all necessary
CATALOG. ABB micro drives ACS55, 0.18 to 2.2 kw
CATALOG ABB micro drives ACS55, 0.18 to 2.2 kw 2 ABB MICRO DRIVES, ACS55, 0.18 TO 2.2 KW/0.25 TO 3 HP Ease of integration. ACS55 drives. 3 Table of contents 004 ABB micro drives, ACS55 005 Easily integrated
SINAMICS GM150 IGCT version
/2 Overview /2 Benefits /2 Design /6 Function /8 Selection and ordering data /8 Options Technical data /14 General technical data /15 Control properties /15 Ambient conditions /16 Installation conditions
Standard Features 200-600V, 50/60Hz input power supply Built-in run rated (AC1) By-pass contactor up to 820 A * Rated 450% current Conformal coated circuit board Voltage ramp or current limit start modes
JUMO ecotrans Lf 01/02
Data Sheet 07 Page /7 JUMO ecotrans Lf 0/0 Microprocessor Transmitter/Switching Device for Conductivity Housing for DIN rail mounting (5 mm 7.5 mm to EN 075 A.) Brief description The JUMO ecotrans Lf 0/0
USERS MANUAL MCD REMOTE OPERATOR
USERS MANUAL MCD REMOTE OPERATOR Order Code: 175G9004, 175G3061 Contents Contents Introduction...2 Important User Information...2 General Description...2 Symbols Used in this Manual...2 Installation...3
VSD Series II Variable Speed Open Drives
VSD Series II Variable Speed Open Drives Product Bulletin Code No. LIT-12011824 Issued May 5, 2015 Refer to the QuickLIT website for the most up-to-date version of this document. The Johnson Controls VSD
AQUAVAR Intelligent Pump Controller TECHNICAL BROCHURE BCPAQIPC R2
AQUAVAR Intelligent Pump Controller TECHNICAL BROCHURE BCPAQIPC R2 INTRODUCTION The Aquavar Intelligent Pump Controller from utilizes an all new Aquavar platform, and combines it with over 20 years of
Special voltages: Voltage >500 V AC are only permissible with external control box. 3-phase AC Voltages/frequencies. 1-phase AC Voltages/frequencies
General information Actuator controls AC 01.2 for controlling multi-turn actuators of the SA/SAR type range and part-turn actuators of the SQ/SQR.2 type range. Power supply Standard voltages AC: 3-phase
4 x 0-10Vdc Channels Fused 24V o/p terminals for actuator power Direct or buffered output signals
IO Input/Output Modules IO-ABM4 Analogue Override Module Description IO-ABM4 Analogue Override Module Intended for applications which require independent manual override of analogue output channels from
Unidrive M400 Fast set-up and diagnostics with real-text display, integrated PLC and safety inputs
Unidrive M400 Fast set-up and diagnostics with real-text display, integrated PLC and safety inputs 0.25 kw - 110 kw (0.33 hp - 150 hp) 100 V 200 V 400 V 575 V 690 V Unidrive M400 features Optional AI-485
SmartOnline 120V 2.2kVA 1.8kW Double-Conversion UPS, 2U, Extended Run, Network Card Slot, LCD, USB, DB9
SmartOnline 120V 2.2kVA 1.8kW Double-Conversion UPS, 2U, Extended Run, Network Card Slot, LCD, USB, DB9 MODEL NUMBER: AL-84111 Specifications OUTPUT Output Volt Amp Capacity (VA) 2200 Output kva Capacity
Electronic Ballast EVG 2000-T
Electronic Ballast EVG 2000-T Operating Manual Table of contents 1 Description 1.1 Advantages of this ballast... 3 1.2 Functional principle... 3 1.3 Energization... 4 1.4 Visualization... 5 1.5 Indications
Low voltage AC drives. ABB micro drives ACS to 3 hp/0.18 to 2.2 kw Catalog
Low voltage AC drives ABB micro drives ACS55 0.25 to 3 hp/0.18 to 2.2 kw Catalog ACS55 IP20 Overview ACS55 micro drives are designed for use in a wide variety of simple machinery applications where only
GS2 Series - Introduction
GS2 Series - Introduction GS2 Series Drives Rating Hp.25.5 1 2 3 5 7.5 10 kw 0.2 0.4 0.75 1.5 2.2 3.7 5.5 7.5 Single-Phase 115 Volt Class Single/Three-Phase 230 Volt Class Three-Phase 230 Volt Class Three-Phase
DIGITAX ST UNIMOTOR 2000RPM COMBINATIONS
DIGITAX ST UNIMOTOR FM @ 2000RPM COMBINATIONS Table data based on 2000 rpm motors 3x Torque Part Part DST1201 0.72 1.0 2.16 2.9 0.12 055E2A300 DST1201 1.2 0.9 3.6 2.6 0.7 075E2A200 DST1201 1.4 1.7 4.2
Analog input module. Brief description. Page 1/8. Data Sheet
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
Temperature Controller (Heat Pumps)
3 345 Temperature Controller (Heat Pumps) For comfort control in HVAC systems RWD31 RWD41 Stand-alone electronic temperature controller Four 2-position (On/Off) outputs Easy adjustment of parameters via
ABB Component Drives ACS150, 0.5 to 5 Hp
ABB Component Drives ACS150, 0.5 to 5 Hp Technical Catalog BUSINESS PROFILE INDUSTRIES PRODUCTS APPLICATIONS EXPERTISE PARTNERS SERVICES Contents Choice 1: Simply contact your local ABB drives sales office
Submittal Data Information
Effective: NOVEMBER 3, 2014 JOB CONTRCTOR ITEM NO. Submittal Data Information TS - Taco dvanced Starter ENGINEER REP. 301-2690 Supersedes: NEW TS - Taco dvanced Starter 1Ø, 120-230V, 1/10-30HP 3Ø, 200-600V,
Low voltage AC drives. ABB component drives ACS to 2.2 kw / 0.25 to 3 hp Catalog
Low voltage AC drives ABB component drives ACS55 0.18 to 2.2 kw / 0.25 to 3 hp Catalog ABB component drives ABB component drives ABB component drives are designed to be incorporated into a wide variety
Differential Pressure Sensors
1 910 1910P01 Differential Pressure Sensors for air or nonaggressive gases QBM66... Pressure-linear characteristic with selectable pressure measuring range Operating voltage AC 24 V or DC 13.5...33 V Output
Ucontrol. 1 Data sheet. Multipurpose controllers for variable voltage 3 ~ fans PXDM Examples of application. 1.2 Equipment / Function
english Multipurpose controllers for variable voltage 3 ~ fans Ucontrol PXDM6..35 1 1.1 Examples of application Speed controller with manual adjustment of output voltage at the unit or via external signal,
1/2 thru 1.5 Hp 1/2 thru 3 Hp 2 thru 5 Hp 1 thru 10 Hp
VS1MX AC Micro Drive 1/2 thru 1.5 Hp 1/2 thru 3 Hp 2 thru 5 Hp 1 thru 10 Hp & Controls 115 VAC 230 VAC 230 VAC 460 VAC 1 Phase - 50/60 Hz 1 Phase - 50/60 Hz 3 Phase - 50/60 Hz 3 Phase - 50/60 Hz Applications:
Technical Datasheet. Compact DC Energy Meter. Multi-Function DC Energy Meter
Preliminary Datasheet Technical Datasheet Compact DC Energy Meter RISH EM DC series is specially designed to measure, display and communicate DC Voltage, Current, Power and Energy to monitor and control
SD700FR. Regenerative Active Front End VARIABLE SPEED DRIVES POWER ELECTRONICS / SD700 SERIES 4 QUADRANT. icool
FR VARIABLE SPEED DRIVES Regenerative Active Front End icool 4 QUADRANT POWER ELECTRONICS / SD700 SERIES FR SD700FR SERIES goes one step ahead keeping the family unique characteristics. Based on the latest
MULTI LANGUAGE KEYPAD
FREQUENCY INVERTER MULTI LANGUAGE KEYPAD E 800 E 2000 EP 66 EM 30 Universal remote keypad- display unit, compatible with all EURA Drives products Robust, for any critical environments, IP66 waterproof
Minimum 27 in-lb Torque
LU Series Actuator Minimum 27 in-lb Torque For damper areas up to 6.8 sq-ft* Actuators in bold have BDCM LU Series - At A Glance LUB(X)24-3 (p. 351) LUX120-3 (p. 353) LUB(X)24-SR (p. 355) LUX120-SR (p.
GTEC Transfer switch Open transition
GTE Transfer switch Open transition 40-2000 amp Description GTE transfer switches combine reliability and flexibility in a small, economical package for transferring loads between a utility and a generator
Actuators for air dampers and control valves of oil burners
7 812 ISO 9001 Actuators for air dampers and control valves of oil burners SQM1... SQM2... Reversible electromotoric actuators Torques: - SQM1... up to 10 Nm - SQM2... up to 20 Nm Run times: - SQM1...
Process controller. for pneumatic and electric actuators. Process controller V. Process controller
for pneumatic and electric actuators Process controller 110-240V Process controller dtron 316 in Rittal-cabinet with current loop sensor input for controlling pneumatic and electric actuators with a position
Unidrive M600 High performance drive for induction and sensorless permanent magnet motors
Unidrive M600 High performance drive for induction and sensorless permanent magnet motors 0.75 kw - 2.8 MW Heavy Duty (1.0 hp - 4,200 hp) 200 V 400 V 575 V 690 V Unidrive M600 features Easy click-in keypad
Phoenix DX Sensorless AC Vector Drive. 3 HP to 3500 HP
Phoenix DX Sensorless AC Vector Drive 3 HP to 3500 HP Standard Features: * PRECISE CONTROL OF MOTOR SPEED AND TORQUE * BI-DIRECTIONAL FLYCATCHER (CATCH SPINNING MOTOR) * EASY TO USE, SIMPLE SETUP * POWER
Differential Pressure Switch QBM81-
s 1 552 Differential Pressure Switch QBM81- for air and nonaggressive gases For ventilation and air conditioning plants To monitor air filters, air flow, fan belts To monitor pressure in clean rooms, kitchens
1 potential-free change-over contact (max. 24 V DC/1 A) for SIL collective failure signal SIL functions - safety functions Standard: Safe ESD
General information AC 01.2 Actuator controls in SIL version for controlling multi-turn actuators of the SA/SAR.2 type range and part-turn actuators of the SQ/SQR.2 type range. Information on SIL features
P-SERIES VFD WITH BYPASS
P-SERIES VFD WITH BYPSS 1 40 HP (200~230 VC) 1 100 HP (380~480 VC), 3Ø Enclosed Bypass - UL Type 3R Standard Controls for Bypass & Local/Remote Operation Special Instructions: FETURES ND OPTIONS Compact
J1000 D E F I 1000 J1000 J1000 J1000 J1000
Compact Inverter SERIES J1000 GB D E F I 1000 J1000 J1000 J1000 J1000 The J-Type YASKAWA Inverter Drive Technology Contents Page 2 Experience & Innovation A leader in Inverter Drives technology Page 3
2.7. IT system floor-standing distribution cabinet Series -IPS-F
Dipl.-Ing. W. Bender GmbH & Co. KG Londorfer Str. 65 35305 Grünberg Tel.: 0640 07-0 Fax: 0640 07-25 IT system floor-standing distribution cabinet Series -IPS-F for supplying power to medical locations
Customized drive solutions
Customized drive solutions Altivar 680 low-harmonic drive system 150 900 hp ND/125 700 hp HD altivardrives.com 2 altivardrives.com altivardrives.com 3 What will you get with drive systems? Whatever you
VSD Series II Variable Speed Enclosed IntelliPass and IntelliDisconnect Drives
VSD Series II Variable Speed Enclosed IntelliPass and IntelliDisconnect Drives Product Bulletin Code No. LIT-12011814 Issued February 4, 2013 The Johnson Controls VSD Series II Variable Speed Enclosed
Variable Frequency Drive NEW! Moving your Control. Forward VFD from Unitronics kW Single Phase kW Three Phase
Variable Frequency Drive Moving your Control NEW! Forward VFD from Unitronics 0.4-2.2kW Single Phase 0.75-110kW Three Phase Total Solution All-in-One software PLC programming HMI design NEW! VFD configuration
Minimum 27 in-lb torque
LU Series Actuator Minimum 27 in-lb torque For damper areas up to 6.8 sq-ft* All Actuators have BDCM LU Series - At A Glance LUB(X)24-3 (p. 258) LUB(X)24-SR (p. 260) LUX24-MFT (p. 262) Basic Product Flexible
SINUS PENTA 2T/4T SINUS PENTA 2T/4T
SINUS PENTA 2T/4T SINUS PENTA 2T/4T Technical Highlights One product, 5 integrated functions - IFD (Inverter Frequency Drive): vector modulation function for general-purpose applications (V/F pattern).
L300P Inverter Specifications
L300P Inverter Specifications Tables for 200V class inverters Note that General Specifications on page 1 9 covers all L300P inverters, followed by footnotes for all specifications tables. Seven 200V models
Presentation Soft starters 0 Altistart 48 soft start - soft stop units
Presentation Soft starters 5 6 7 65_Ver.-EN.fm/ Presentation (continued) Soft starters Applications The Altistart 8 soft start - soft stop unit is a controller with 6 thyristors which is used for the torque-controlled
High performance Vector Control. Ratings. System configuration
System configuration High performance Vector Control Low harmonic or regenerative drive IP54 full range Compact design and robustness Built-in filter (according to C3 class) Built-in fuses (from 200 kw)
www. ElectricalPartManuals. com Instruction Bulletin ALTIVAR FLEX58 TRX Adjustable Speed Chassis Drive Controllers Installation Guide
Instruction Bulletin ALTIVAR FLEX58 TRX Adjustable Speed Chassis Drive Controllers Installation Guide Retain for future use. 30072-450-47A July 2002 Raleigh, NC, USA HAZARDOUS VOLTAGE Read and understand
SED2 Variable Frequency Drives Conventional Bypass (C-Bypass) Options
SED2 Variable Frequency Drives Conventional Bypass (C-Bypass) Options Product Description The SED2 Conventional Bypass (C-Bypass) Options are companion packages for the family of SED2 Variable Frequency
Drive Electronics \ Drive Automation \ System integration \ Services MOVITRAC LTP. Catalog. Edition 03/ / EN
Drive Electronics \ Drive Automation \ System integration \ Services MOVITRAC LTP Edition 03/2009 Catalog 16798015 / EN SEW-EURODRIVE Driving the world 1 Important Notes... 4 1.1 Structure of the safety
ABB Drives ACS550-U1-059A-2, 20 HP, 3PH, 200 VAC, Wall Mount VFD
Page 1 of 7 HOME (HTTP://WWW.AUTOMATION-MALL.COM/) ABB DRIVES ACS550-U1-059A-2, 20 HP, 3PH, 200 VAC, WALL MOUNT VFD ABB Drives ACS550-U1-059A-2, 20 HP, 3PH, 200 VAC, Wall Mount VFD 27136e95/a/c/acs550_r3.jpg)
Distinctive Features: Bidirectional solar PCU Hybrid inverter (Solar/ Grid/BATT) Vector Modulated Inverter Control Multiple DSP control operation
SUN MAGIC + SUN MAGIC + is a state of art PCU product from ENERTECH product basket with Global standards. This unit will give operational flexibility to its customers to enjoy the benefits of advanced
RS232 Communications cable with PC ER M. RJ-45 / USB Adapter Remote Operator Extansion Cable. Communication Unit. Mounting Accesories
JZ J1000 The basic inverter V/f controlled inverter Good torque performance (150% / 3 Hz) Double rating ND 120%/1min and HD 150%/1 min Overload detection function (150% during 60s) Motor thermal function
Distinctive Features: Bidirectional solar PCU Hybrid inverter (Solar/ Grid/BATT) Vector Modulated Inverter Control Multiple DSP control operation
SUN MAGIC SUN MAGIC is a state of art PCU product from ENERTECH product basket with Global standards. This unit will give operational flexibility to its customers to enjoy the benefits of advanced monitoring
AuCom - Soft Starters
AuCom - Soft Starters AuCom - Soft Starters 208 CSXi Compact Soft Starters AuCom s new CSX Series includes two ranges. Users can choose between a simple soft start control device and an advanced soft start
Technical Specifications. Sentinel PRO 700 VA up to 3000 VA 1000 VA ER-2200 VA ER-3300 VA ER
Technical Specifications Sentinel PRO 700 VA up to 3000 VA 1000 VA ER-2200 VA ER-3300 VA ER Sentinel PRO CONTENTS 1. GENERAL DESCRIPTION... 2 1.1. Main features of the UPS unit... 3 1.2. Standard Versions...
Actuators for air dampers and control valves of oil burners
7 812 Actuators for air dampers and control valves of oil burners SQM1... SQM2... Reversible electromotoric actuators Torques: - SQM1... up to 10 Nm - SQM2... up to 20 Nm Running times: - SQM1... 14...100
Variable Frequency Drives
Table of Contents Variable Frequency Drives PRODUCT PRODUCT CODE RESOURCE DOCUMENTS PAGE # Introduction C-3 BT300 HVAC Drives BT300 149-711 / 154-126 C-5 BT300 HVAC Drives Conventional Bypass (C-Bypass)
AS THE TIME GOES BY WE HAVE CONSTANTLY MADE QUALITY A TOP PRIORITY
PRODUCTS BROCHURE AS THE TIME GOES BY WE HAVE CONSTANTLY MADE QUALITY A TOP PRIORITY Since we made our first AC drive 23 years ago, we have always earned the crown from our customers as the most reliable
AT30 SERIES BATTERY CHARGER
STANDARD FEATURES 5 YEAR WARRANTY 5 Year Product Warranty Universal main control board operates in any AT Series charger Alarm assembly with local LEDs and summary relay contact for AC Failure, DC Failure,
BT300 HVAC Drives Conventional Bypass (C-Bypass) Options
BT300 HVAC Drives Conventional Bypass (C-Bypass) Options Description The BT300 Conventional Bypass is a companion package for the family of BT300 HVAC Drives. For information on the family of BT300 HVAC
Honeywell CORE Drive FEATURES APPLICATION SPECIFICATION DATA
Honeywell CORE Drive SPECIFICATION DATA FEATURES APPLICATION The new Honeywell VFD CORE Drive addresses the need to save time for installation, and provides the lower total installed costs with years of
1/2 thru 1.5 Hp 1/2 thru 3 Hp 2 thru 5 Hp 1 thru 10 Hp
VS1MX AC Micro Drive 1/2 thru 1.5 Hp 1/2 thru 3 Hp 2 thru 5 Hp 1 thru 10 Hp & Controls 115 VAC 230 VAC 230 VAC 460 VAC 1 Phase - 50/60 Hz 1 Phase - 50/60 Hz 3 Phase - 50/60 Hz 3 Phase - 50/60 Hz Applications:
ADJUSTABLE FREQUENCY CONTROLS SENSORLESS VECTOR CONTROL. Dual Rating. Technologies Inc. mgitech.com NRTL/C CERTIFIED
ADJUSTABLE FREQUENCY CONTROLS SENSORLESS VECTOR CONTROL Dual Rating NRTL/C CERTIFIED Technologies Inc. mgitech.com Sensor/Sensorless Vector Control Dual current rated for constant and variable torque Auto
A 601 A B C. 1. How it works
601 W4 DXN6P25 Variable flow-control 6-way valve, series DXN6_ For 4-pipes climate ceilings with change-over Pressure independent variable flow-control Integrated flow measurement Power supply U v : 24Volt
Quick guide. Plug-in fans GPPM with FC101_106 August 2014
Quick guide Plug-in fans GPPM with FC101_106 August 2014 Fläkt Woods permanent magnet motors and speed controllers for plug fans GPPM 1. General Fläkt Woods offers a wide range of permanent magnet motors
ILA2D572TC1F0 integrated drive ILA with servo motor V - DeviceNet - indus connector
Characteristics integrated drive ILA with servo motor - 24..48 V - DeviceNet - indus connector Main Range of product Product or component type Device short name Motor type Number of motor poles 6 Phase
Shenzhen Sine Electric Co., Ltd.
Page 1 of 5 Favorite Contact 中文 Please enter key words 提交查 Home Products Solutions Service About us Products EM500 Open loop Inverter Your current location:home > Products Standard Inverters EM500 Open
JUMO thermocor. Portable measuring system for AMS2750 and CQI-9. Brief description. Block diagram. Special features. JUMO thermocor.
Page 1/8 JUMO thermocor Portable measuring system for AMS2750 and CQI-9 Brief description The JUMO thermocor is a high-precision documenting test device with 12 analog inputs for thermocouples. The use
CENTAURI ENERGY SERVER TECHNICAL DATA kw POWER
Chassis Inverter power Rated input Rated output Battery pack Safeties Environment Others Input Voltage Lower Limit Input Voltage Upper Limit Power Input Current Output Voltage Output accuracy Transient
Power Switching Devices
Watlow has manufactured solid state power controllers for over forty years. Watlow s is a microprocessor-based product that features application flexibility unmatched by any other silicon controlled rectifier
INTER PLANT STANDARD STEEL INDUSTRY NO CORRESPONDING IS
INTER PLANT STANDARD STEEL INDUSTRY SOFT STARTER FOR VOLTAGE UP TO 690 V AC IPSS: 1-10-040-15 IPSS NO CORRESPONDING IS 0. FOREWORD 0.1 This interplant standard has been prepared by the Standard Committee
Number 1 in efficiency
PowerXL DE1 Variable Speed Starter www.eaton.eu/de1 Number 1 in efficiency The new device category! The PowerXL DE1 Variable Speed Starter The PowerXL DE1 Variable Speed Starter one device, all the advantages
EPS/ELA-Series User Manual EPS/ELA 250W
EPS/ELA-Series User Manual EPS/ELA 250W EPS Stromversorgung GmbH Tel: +49 (0)821 570451 0 Index 3 Page: 1 Table of contents: Page 1. Features of ELA-Series... 3 1.1 Basic Functions... 3 1.2 Options...