SGI 500/750XTM FRONT ISOMETRIC 11. AC CONDUCTOR CONNECTIONS 13. AC GROUND CONNECTIONS

Transcription

1 PRODUCT MASS SGI 500XTM SGI 750XTM INSTALLED MASS: LS SHIPPING MASS: LS SYSTEM MASS IS ESTIMATED ONLY, AND IS FOR THE ASE UNIT WITHOUT OPTIONS. NOTES: 1. SEE SOLECTRIA RENEWALES DOCR (INSTALLATION AND OPERATION MANUAL, SGI 500XTM-750XTM) FOR COMPLETE INSTALLATION REQUIREMENTS. 2. ALL WIRE SIZING INFORMATION GIVEN IN THIS DRAWING IS FOR REFERENCE PURPOSES ONLY, SEE SOLECTRIA RENEWALES DOCR (INSTALLATION AND OPERATION MANUAL, SGI 500XTM- 750XTM) FOR DETAILED WIRE SIZING INFORMATION. 3. SHEETS INCLUDE: 1. FRONT ISOMETRIC 2. FRONT 3. REAR 4. RIGHT 5. LEFT 6. TOP 7. OTTOM 8. DC CONDUCTOR CONNECTIONS 9. DC CONDUCTOR CONNECTIONS 10. DC GROUND CONNECTIONS 11. AC CONDUCTOR CONNECTIONS 12. AC CONDUCTOR CONNECTIONS WITH OPTIONAL AC REAKER OR DISCONNECT 13. AC GROUND CONNECTIONS 14. SIGNAL WIRE ROUTING 15. AS SHIPPED ISOMETRIC 16. RECOMMENDED RIGGING AND LIFTING METHODS REVISIONS REV EC# DESCRIPTION DRAWN CHECKED DATE A INITIAL RELEASE = REV A2 PLUS THE FOLLOWING CHANGES: SHEET 1: ADDED NOTE 2 AOUT WIRE SIZING. SHEET 1: ADDED SGI 500XTM MASS TO THE PRODUCT MASS TALE. SHEET 3: ADDED DC CONDUIT ENTRY ON REAR WALL. ALL SHEETS: UPDATED DRAWING TEMPLATE. ALL SHEETS: AIR INTAKE/EXHAUST DESIGN CHANGED, IMAGES UPDATED SHEET 5: UPDATED/ADDED DIMENSIONS FOR NEW AIR INTAKE/EXHAUST DESIGN SHEET 15: PALLET DESIGN CHANGED, IMAGE UPDATED SHEET 15: ADDED DIMENSIONS FOR PALLET MODIFICATIONS J. KADOKO M. KELLY 8/12/2014 C. THOMPSEN J. FILLION 2/23/2015 R E N E W A L E S DOCUMENT IS SUJECT TO CHANGE WITHOUT NOTICE SCALE: 1:16 SHEET 1 OF 16 ISO REV. FRONT ISOMETRIC

2 NOTES: 1. DIMENSIONS INDICATED Y (COG) SHOW APPROXIMATE LOCATION OF THE INVERTER CENTER OF GRAVITY. 6 UNIT LIFTING 12 MINIMUM DISTANCE THAT MUST E CLEAR AOVE THE INVERTER FOR VENTILATION MINIMUM DISTANCE THAT MUST E CLEAR TO EACH SIDE OF THE INVERTER FOR VENTILATION (COG) R E N E W A L E S DOCUMENT IS SUJECT TO CHANGE WITHOUT NOTICE SCALE: 1:12 SHEET 2 OF 16 ISO REV. FRONT 62.9 (COG) 109

3 NOTES: 1. THE ALTERNATE DC CONDUIT ENTRY ARE TO E USED ONLY IF THE FOLLOWING INTEGRAL SUCOMINER OPTIONS ARE SELECTED: 1. ANY NUMER OF FUSE INPUTS 2. 6 OR LESS REAKER INPUTS EXHAUST SHROUDS ALTERNATE DC CONDUIT ENTRY R E N E W A L E S REAR DOCUMENT IS SUJECT TO CHANGE WITHOUT NOTICE SCALE: 1:12 SHEET 3 OF 16 ISO REV.

4 NOTES: 1. DIMENSIONS INDICATED Y (COG) SHOW APPROXIMATE LOCATION OF THE INVERTER CENTER OF GRAVITY (COG) ALTERNATE AC CONDUIT ENTRY LOCATION 40.5 (COG) R E N E W A L E S DOCUMENT IS SUJECT TO CHANGE WITHOUT NOTICE SCALE: 1:12 SHEET 4 OF 16 ISO REV. RIGHT

5 MOUNTING FOR EXTERNAL ACCESSORIES THREAD 1/4-20 THREAD DEPTH: ALTERNATE SIGNAL WIRE ENTRY LOCATION R E N E W A L E S LEFT DOCUMENT IS SUJECT TO CHANGE WITHOUT NOTICE SCALE: 1:12 SHEET 5 OF 16 WITHOUT AIR FILTER OPTION WITH AIR FILTER OPTION ISO REV.

6 MINIMUM DISTANCE THAT MUST E CLEAR EHIND THE INVERTER FOR VENTILATION AND MAINTENANCE ACCESS R E N E W A L E S DOCUMENT IS SUJECT TO CHANGE WITHOUT NOTICE SCALE: 1:12 SHEET 6 OF 16 ISO REV. TOP

7 DRAIN HOLES DC CONDUIT FLOOR ENTRY LOCATION RENEWALES OTTOM DOCUMENT IS SUJECT TO CHANGE WITHOUT NOTICE SCALE: 1:12 ISO REV. SHEET 7 OF 16 AC CONDUIT FLOOR ENTRY LOCATION

8 NOTES: 1. DC CONDUCTOR CONNECTIONS ARE DEPENDENT ON SELECTED INTEGRAL SUCOMINER. SEE SOLECTRIA RENEWALES DOCR (INSTALLATION AND OPERATION MANUAL, SGI 500XTM-750XTM) FOR COMPLETE REQUIREMENTS. DC INPUT CONDUCTOR SIZE # OF CONDUCTORS PER INPUT CONDUCTOR SIZE MCM MAX MCM MAX. GROUNDED DC CONDUCTOR INSTALLATION UNGROUNDED DC CONDUCTOR INSTALLATION LEFT INTERIOR WALL 76 MAXIMUM CONNECTION HEIGHT FOR GROUNDED DC CONDUCTOR INSTALLATION 78 MAXIMUM CONNECTION HEIGHT FOR UNGROUNDED DC CONDUCTOR INSTALLATION SCALE 1:32 30 MINIMUM 8 MINIMUM R E N E W A L E S DOCUMENT IS SUJECT TO CHANGE WITHOUT NOTICE SCALE: 1:12 SHEET 8 OF 16 ISO REV. DC CONDUCTOR CONNECTIONS 9 15 SECTION VIEW : LEFT INTERIOR WALL

9 NOTES: 1. DC CONDUCTOR CONNECTIONS ARE DEPENDENT ON SELECTED INTEGRAL SUCOMINER. REFERENCE SOLECTRIA RENEWALES DOCR (INSTALLATION AND OPERATION MANUAL, SGI 500XTM-750XTM) FOR COMPLETE REQUIREMENTS. 2. REAR INTERIOR WALL DC CONDUCTOR CONNECTION APPLY ONLY TO UNGROUNED CONDUCTORS FOR INTEGRAL DC REAKER SUCOMINER IN EXCESS OF 6 INPUTS. REAR INTERIOR WALL DC CONDUCTOR CONNECTION DO NOT APPLY TO INTEGRAL FUSE SUCOMINER. DC INPUT CONDUCTOR SIZE # OF CONDUCTORS PER INPUT CONDUCTOR SIZE MCM MAX MCM MAX. UNGROUNDED DC CONDUCTOR INSTALLATION REAR INTERIOR WALL 56 MAXIMUM CONNECTION HEIGHT FOR UNGROUNDED DC CONDUCTOR INSTALLATION SCALE 1:32 9 MINIMUM R E N E W A L E S DOCUMENT IS SUJECT TO CHANGE WITHOUT NOTICE SCALE: 1:12 SHEET 9 OF 16 ISO REV. DC CONDUCTOR CONNECTIONS 21 SECTION VIEW : REAR INTERIOR WALL

10 DC GROUND CONDUCTOR CONNECTION # OF LUGS GEC 1 DC GROUND CONDUCTOR SIZE # OF CONDUCTORS PER LUG # OF CONDUCTORS CONDUCTOR SIZE 1 1 1/0 AWG TO 750 MCM 2 2 1/0 AWG TO 300 MCM EGC 32 1 UP TO AWG TO 1/0 AWG GEC LUG EGC LUGS LEFT INTERIOR WALL SCALE 1: R E N E W A L E S DOCUMENT IS SUJECT TO CHANGE WITHOUT NOTICE SCALE: 1:5 SHEET 10 OF 16 ISO REV. DC GROUND CONNECTIONS SECTION VIEW : LEFT INTERIOR WALL

11 # OF LUGS PER PHASE # OF CONDUCTORS PER LUG AC OUTPUT CONDUCTOR SIZE # OF CONDUCTORS PER PHASE CONDUCTOR SIZE 6 1 UP TO MCM TO 800 MCM AC CONDUCTOR CONNECTION SCALE 1:32 46 R E N E W A L E S DOCUMENT IS SUJECT TO CHANGE WITHOUT NOTICE SCALE: 1:8 SHEET 11 OF 16 ISO REV. AC CONDUCTOR CONNECTIONS DETAIL : AC CONDUCTOR CONNECTIONS

12 VIEW SHOWN WITH AC CUSTOMER WIRE COVER PANELS IN PLACE # OF LUGS PER PHASE # OF CONDUCTORS PER LUG AC OUTPUT CONDUCTOR SIZE # OF CONDUCTORS PER PHASE CONDUCTOR SIZE 6 1 UP TO TO 800 MCM AC CONDUCTOR CONNECTION WITH OPTIONAL AC REAKER OR DISCONNECT INSTALLED SCALE 1:32 32 VIEW SHOWN WITH AC CUSTOMER WIRE COVER PANELS REMOVED R E N E W A L E S AC CONDUCTOR CONNECTIONS WITH OPTIONAL AC REAKER OR DISCONNECT DOCUMENT IS SUJECT TO CHANGE WITHOUT NOTICE SCALE: 1:6 SHEET 12 OF 16 ISO REV DETAIL : AC CONDUCTOR CONNECTIONS WITH OPTIONAL AC REAKER OR DISCONNECT INSTALLED

13 # OF LUGS 9 # OF CONDUCTORS PER LUG AC GROUND CONDUCTOR SIZE # OF CONDUCTORS CONDUCTOR SIZE 1 UP TO 9 1/0 AWG TO 750 MCM 2 UP TO 18 1/0 AWG TO 300 MCM RIGHT INTERIOR WALL VIEW SHOWN WITH AC CUSTOMER WIRE COVER PANELS IN PLACE SCALE 1:32 AC GROUND CONDUCTOR CONNECTION VIEW SHOWN WITH AC CUSTOMER WIRE COVER PANELS REMOVED 31.5 R E N E W A L E S DOCUMENT IS SUJECT TO CHANGE WITHOUT NOTICE SCALE: 1:12 SHEET 13 OF 16 ISO REV. AC GROUND CONNECTIONS SECTION VIEW : RIGHT INTERIOR WALL

14 ALTERNATE SIGNAL WIRE ENTRY LOCATION SCALE 1:32 GENERAL ROUTING LOCATION FOR SIGNAL WIRE CONNECTIONS REMOTE SHUTDOWN OPTIONAL SOLRENVIEW AIR OPTIONAL SHUNT TRIP OPTIONAL RESIDUAL CURRENT MONITORING GENERAL ROUTING LOCATION FOR SIGNAL WIRE CONNECTIONS RS 485 OPTIONAL SOLRENVIEW R E N E W A L E S SIGNAL WIRE ROUTING DOCUMENT IS SUJECT TO CHANGE WITHOUT NOTICE SCALE: 1:8 SHEET 14 OF 16 ISO REV. DC CONDUIT FLOOR ENTRY LOCATION

15 NOTES: 1. THE INVERTER IS SHIPPED ON AN OVERSIZED SHIPPING PALLET. IT IS RECOMMENDED TO KEEP THE INVERTER SECURED TO THE PALLET AND MOVED AS CLOSE AS POSSILE TO THE FINAL LOCATION PRIOR TO REMOVING THE PALLET R E N E W A L E S AS SHIPPED ISOMETRIC DOCUMENT IS SUJECT TO CHANGE WITHOUT NOTICE SCALE: 1:20 SHEET 15 OF 16 ISO REV.

16 NOTES: 1. RECOMMENDED SINGLE POINT LIFTING METHOD SHOWN. SEE SOLECTRIA RENEWALES DOCR (INSTALLATION AND OPERATION MANUAL, SGI 500XTM-750XTM) FOR PREFERRED LIFTING METHODS AND ADDITIONAL LIFTING AND INSTALLATION REQUIREMENTS. RECOMMENDED FORK LIFT ARE INDICATED Y LAELS 15 FEET MINIMUM R E N E W A L E S RECOMMENDED RIGGING AND LIFTING METHODS DOCUMENT IS SUJECT TO CHANGE WITHOUT NOTICE SCALE: 1:32 SHEET 16 OF 16 ISO REV. RECOMMENDED FORK LIFT ARE INDICATED Y LAELS 45 34