AP 142E Expandable $
|
|
- Felix Manning
- 5 years ago
- Views:
Transcription
1 APEX SPREADING MACHINE PRICE LIST January 1, 2017 AP 142E Expandable $ ¾ solid cloth bar 3 support tubes across machine 3 support tubes across drop off arm Edge control utilizing Thomson bearing movement Special machine widths over 72 $ per 6 Double uprights (includes cloth bar ) AP-140 $ Wheel riser kit (2,4,6 ) $ Cloth weights (set of 2) $ **Please note that Rodway catchers are no longer available AP 138 Turntable up to 72 $ ¼ frozen cloth bar with cones Additional lifter arm assembly (AP-139) $ Special machine sizes over 72 $ per 6 Wheel riser kit (2,4,6 ) $ Double uprights ( includes cloth bar) $ **** Note: Measurements are machine capacity. Table must be 6 wider ****
2 AP 134 Bulldog up to 72 $ ¼ frozen cloth bar with cones Heavy Duty (roll weights to 250 lbs.) Table top shifts with edge control Additional lifter arm assembly $ Special machine sizes over 72 $ per 6 Wheel riser kit (2,4,6 ) $ Double uprights (includes cloth bar) $ AP Roll Goods Unwinder $ ¾ cloth bar with cones Special machine sizes over 78 $ per 6 ( Includes heavy duty frozen cloth bar and cones) AP 236 Glider up to 72 $ Permanent / Movable catchers with tuck blades 1 ¼ frozen cloth bar and cones Table top shifts with edge control 250 lb. roll weight capacity Ply counter Electronic edge control ( 110 volt or 220 volt) $ Special machine sizes over 72 $ per 6 Extra permanent or movable catcher $
3 Apex track cut-off 4 machine mounted cutter with cord reel and guide track assembly $ Demand feed motorized feed roller system $ AP 500 Super Heavy Duty up to 72 $ Heavy duty construction ( 500 lb. roll capacity) 1 ¼ solid steel cloth bar and cones Permanent / Movable catchers with tuck blades $ Electronic edge control ( 110 volt or 220 volt) $ Special machine sizes over 72 $ per 6 Extra permanent or movable catcher $ Apex track cut-off 4 machine mounted cutter with cord reel and guide track assembly $ Demand feed motorized feed roller system $ AP End of Table Roll Cradle up to 72 $ Live roller cradle Solid tubular steel frame Maximum roll weight 100 lbs. Special machine sizes over 72 $ per 6 Casters for movable $ AP-800 Pull / Cut System (12 foot system) $21, long by 78 wide cutting table
4 Pneumatic operator clamp, pull to length moving frame 72 woven material capacity 90 psi required Auto 4 round knife track cutting machine (110v or 220v 1 phase) Auto-cutting machine movement across track and up/down movement to allow for cut plies to stack in place Variable speed knife travel Manual blade sharpening Please allow 6-8 weeks for delivery CRATING AP 138, AP 134, AP 134 CR, AP 144 $ crating charge AP $ domestic $ export AP $ domestic $ export AP $ domestic $ export AP-800 or special wide sizes of above machines ** Call for estimate ACCESSORIES Cloth Bars: AP4 solid bar ¾ $ AP4 1 solid bar 1 $ AP4NS - 1 ¼ solid bar 1 ¼ $ ** price includes cloth bar and cones Cloth cones: AP3 cloth cone small $ each C-4 cloth cone large $ each ** bore sizes available ½, ¾, 7/8, 1, 1 1/8, 1 ¼, 1 ½ Cloth weights:
5 CWT24 cloth weight 24 CWT36 cloth weight 36 CWT48 cloth weight 48 $ each $ each $ each TRACK: AP/100 T track with spacers/screws complete $ (5 foot sections) AP/ T track ( 5 foot track only ) $ ( 5 foot sections ) AP/ single spacer ( plastic ) $ 7.50 AP/ double spacer ( plastic ) $ AP/ Phillips head wood screw $ 2.75 AP/ track end stop $ 25.00
6 APEX DEALER DISCOUNT SCHEDULE There is no discount allowed on applicable crating charges Please provide written confirmation of all machine orders to confirm the machine size to be ordered. Remember that the machine size is the maximum capacity of the width cloth that can be spread through the machine. TABLE SIZES ARE ALWAYS 6 WIDER THAN MACHINE SIZE All machines are custom built to customer specifications. Proper care in sizes is critical to avoid mistakes!!!
TIRE GROOVER OPERATING INSTRUCTIONS UPRIGHT GROOVER
TIRE GROOVER OPERATING INSTRUCTIONS UPRIGHT GROOVER SG MODEL READ INSTRUCTIONS THOROUGHLY BEFORE OPERATING 3451 S. 40th Street Phoenix, AZ 85040 602.437.5020 800.223.4540 www.tssissg.com info@tsissg.com
More informationPregis Intellipack Corp E. Marshall Street, Suite Tulsa, OK (918)
DATE: 11/30/2010 Pregis Intellipack Corp. 10838 E. Marshall Street, Suite 142 - Tulsa, OK 74116 (918) 877-4050 Estimate Time to Complete: 1.5 to 2 hours SmartBAGGER Crating Procedure The SmartBAGGER is
More informationPNEUMATIC CUTTING TOOL FOR STEEL BAND PNEUMATIC PUNCH TOOL TABLE TOP SHEARS TABLE TOP SHEARS HAND HELD SET GAUGE TABLE TOP SET GAUGE/PRINTER FOR
ACCESSORIES ALO TA10/12/13 ALO H7 ALO 15/18/20/21 ALO 22-01 ALO 81-60/83-60 ALO 81-57/81-58 ALO 81-80 ALO 174-DCT ALO 181/183 VISION ALO 185-011/012 ALO 820/822 ALO 825/826 ALO 831 ALO 863-HD ALO 880 ALO
More informationTSM 610A. Installation Manual. Ver 2.4, 2014
TSM 610A Installation Manual Ver 2.4, 2014 Sewn Products Equipment Company - 971 Airport Road - Jefferson, GA 30549 Ph: 706-367-2755 Ph: 800-327-2677 Fax: 706-367-4112 www.sewnproducts.com sewnproducts@sewnproducts.com
More informationType 2 Push-Through 37 Ton Log Splitter. Assembly Manual
Type 2 Push-Through 37 Ton Log Splitter Assembly Manual Refer to this manual for the following models: RS37PT-LF09PC-16-1 RS37PT-LF09EC-16-1 RS37PT-LF09EC-16-2 RS37PT-LF13EC-22-1 RS37PT-LF13EC-22-2 RS37PT-LF15EC-22-1
More informationALUMAREEL. Electrical Cord Reel. Model EC6 100 Model EC Operational, Maintenance and Installation Manual
ALUMAREEL TM Electrical Cord Reel Model EC6 100 Model EC3 100 Operational, Maintenance and Installation Manual READ AND UNDERSTAND THIS MANUAL BEFORE USING THIS PRODUCT. RETAIN FOR FUTURE REFERENCE 1 P
More informationElectrical Operated Stand Up Desk Assembly Guide for 60 & 48 Wide Flat Top Desks
Electrical Operated Stand Up Desk Assembly Guide for 60 & 48 Wide Flat Top Desks American Filing Solutions P.O. Box 891719, Temecula CA 9589 Tel: 1-951-694-4150 1-888-891-1970 Fax: 1-951-506-7717 1-888-891-9970
More informationParts list ErgoStrap 600E Frame - Cutter - Strap lifter
Parts list ErgoStrap 600E Frame - Cutter - Strap lifter Item Quantity Unit Designation Art. No. 1.1 1 ea. Frame with storage compartment (without attachement parts) 600 E 600332 1.2 2 ea. Large wheels
More informationALAMO INDUSTRIAL Specifications Versa Series, 17 Mid-Mount Articulated Boom
ALAMO INDUSTRIAL Specifications Versa Series, 17 Mid-Mount Articulated Boom It is the purpose of this specification to describe a mid-mounted, articulated, hydraulically powered boom mower for cutting
More informationDRILLING ACCESSORIES
Pipe Mount Works on any Core Bore rig Can be used on any size pipe Comes complete with base plate, tie-down strap and hardware Bit capacity depends on rig being used Automatically runs your M-2 core rig!
More informationCHEMINSTRUMENTS HOT ROLL LAMINATOR MODEL HL-100, HL-101 OPERATING INSTRUCTIONS
CHEMINSTRUMENTS HOT ROLL LAMINATOR MODEL HL-100, HL-101 OPERATING INSTRUCTIONS PRODUCT DESCRIPTION...2 SPECIFICATIONS...3 UNPACKING...3 ASSEMBLY...3 Key Components...5 SAFETY FEATURES...7 Trip Wire...7
More informationCustomer Name. Instruction for Operation. Single Head Sleever
Customer Name Instruction for Operation Single Head Sleever Content Reload of Sleeve Roll (page 3~5) Sleeve Feeding (Page 6~7) Sleeve Sensor Positioning (Page 8~10) Holder Installation (Page 11~13) Splice
More informationHow to operate TBC-555L
TBC-555L. How to operate TBC-555L TBC-555L 1. An example (Cutting length : 70mm, Cutting quantity : 120 pcs) Turn on the POWER SW. Set cutting length. (Press the following buttons in order.) Set cutting
More informationADVANCED FLUID MANAGEMENT SOLUTIONS. An overview of the RAASM world 5 YEARS WARRANTY. Made In Italy
ADVANCED FLUID MANAGEMENT SOLUTIONS An overview of the RAASM world 5 YEARS WARRANTY Made In Italy ADVANCED FLUID MANAGEMENT SOLUTIONS The complete range of our products is presented in the specific catalogues:
More informationInstallation Instructions 1812 Folder Disk Clutch Retrofit Kit Martin Yale #WRA
Installation Instructions 1812 Folder Disk Clutch Retrofit Kit Martin Yale #WRA1812510 Background: Early production Martin Yale Model 1812 Folders were originally equipped with a spring-clutch type feed
More informationService Manual Mozart Fireplace
Service Manual Mozart Fireplace Model Numbers: CFP3913 REV PCN DATE 00 11637 Sep 23, 09 Dimplex North America Limited 1367 Industrial Road Cambridge ON Canada N1R 7G8 1-888-346-7539 www.dimplex.com In
More informationElectrical Schematic and Pneumatic Wiring Diagrams
THE EASTMAN Raptor Electrical Schematic and Pneumatic Wiring Diagrams Technical Support: 1-800-87-5595 Please read completely before attempting to operate your new RAPTOR. ELECTRICAL HAZARD Electrical
More informationTT-610 & TT-620 SERIES BAG CLOSING CONVEYOR
TT-610 & TT-620 SERIES BAG CLOSING CONVEYOR INSTALLATION AND REPAIR MANUAL 6873 MARTINDALE RD. SHAWNEE, KANSAS 66218 Phone: 913-441-4788 Fax: 913-441-1711 Email: jembaggingscales.com TABLE OF CONTENTS
More informationSERVICE MANUAL BAS-311H. Please read this manual before making any adjustments. DIRECT DRIVE PROGRAMMABLE ELECTRONIC PATTERN SEWER
SERVICE MANUAL Please read this manual before making any adjustments. DIRECT DRIVE PROGRAMMABLE ELECTRONIC PATTERN SEWER This service manual is intended for ; be sure to read the instruction manual before
More informationRevision Date: 07/28/2015. Electrical Operated Stand Up Desk Assembly Guide for 60 & 48 Wide Flat Top Desks
Revision Date: 07/8/0 Electrical Operated Stand Up Desk Assembly Guide for 60 & 48 Wide Flat Top Desks Table of Contents Table of Contents........................................ 3 Warnings & Guidelines....................................
More informationOWNER'S MANUAL & INSTALLATION INSTRUCTIONS 6500 Series
OWNER'S MANUAL & INSTALLATION INSTRUCTIONS 6500 Series "You push our buttons, we pour your drink!" SIDEBAR BEVERAGE SYSTEMS INC. (800)775-6150 PHOENIX, AZ Congratulations!! You are now the proud owner
More informationPipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
More informationIsselbaecher. slicer. kitchen equipment GmbH. slicer Isselbaecher Zentro Z 5. Dimensions : 390 x 305 x 300 mm connection : 0,17 KW - 230/1/50
Zentro Z 5 Zentro Z 5 22 GS CE p 22 GS CE p 25 GS CE p 25 GS CE p Dimensions : 390 x 305 x 300 mm connection : 0,17 KW - gravity tilting stainless steel full knife knife diam. : 170 mm accessories : 1
More information548 Falcon HD End Cutter
EASTMAN THE EASTMAN Falcon HD End Cutter with Lifting Mechanism Model: FALHDH Instruction Manual & Illustrated Parts List Please read completely before attempting to operate your new Falcon HD Track Cutter.
More informationPlatform and Frame Dollies. Platform / Plate and Sheet Handling. Sheet buggies. Platform / Plate and Sheet Handling 130 HOUR.
130 Platform and Frame Dollies Capacity 300 kg A range of dollies to suit most industrial needs. Steel frame construction with a choice of deck types. Compact 600 x 600 mm deck size.. 4 swivel castors
More informationOPERATING INSTRUCTIONS FOR. Gold-Place TM. Manual Pick & Place with Dispenser System Model MPP-21
OPERATING INSTRUCTIONS FOR Gold-Place TM Manual Pick & Place with Dispenser System Model MPP-21 AUTOMATED PRODUCTION SYSTEMS, INC. 2840 Pine Road Huntingdon Valley PA 19006 Phone: (215) 938-1000 FAX: (215)
More informationm WARNING: READ ALL m WARNING: This unit can be dangerous! Careless or m DANGER: Risk of cut. Keep hands and feet away IMPORTANT! Safety Instructions
16-Inch Manual Reel Mower with Catcher Model No. MJ500M Form No. SJ-MJ500M-880E A Division of Snow Joe, LLC IMPORTANT! Safety Instructions m WARNING: READ ALL INSTRUCTIONS BEFORE USE. m WARNING: This unit
More informationBRANCH LOGGERS URBAN
BRANCH LOGGERS URBAN EFFECTIVE USAGE OF WOOD WASTE URBAN Branch loggers process wood (branches, laths and offcuts) which would usually be chipped up or left on site. The smaller logs produced can then
More informationElectrical Operated Stand Up Desk Assembly Guide for 60 & 48 Wide Split Top Desks
Electrical Operated Stand Up Desk Assembly Guide for 60 & 48 Wide Split Top Desks Table of Contents Table of Contents... 2 Warnings & Guidelines... 3 Parts List & Hardware.... 5 Assembly and Installation
More information25 RAILWAY STREET KINGSTON, ONTARIO K7K 2L7 (613) Fax:(613)
25 RAILWAY STREET KINGSTON, ONTARIO K7K 2L7 (613)546-6663 1-800-267-0920 Fax:(613)542-4451 EMAIL: info@levacsupply.com 330 LAURIER BLVD. P.O. BOX 460 BROCKVILLE, ONTARIO K6V 5V6 (613)345-1991 1-877-270-0317
More informationPRODUCT MANUAL TILE CUTTING MACHINE. . Operation. Parts List and Diagram SPECIFICATIONS CAUTION:
FLORCRAFTT TM PRODUCT MANUAL SKU NUMBER 709-4242 SERIAL NUMBER: CAUTION: FOR YOUR OWN SAFETY READ INSTRUCTION MANUAL COMPLETELY AND CAREFULLY BEFORE OPERATING THIS 7 TILECUTTING MACHINE SPECIFICATIONS
More informationModel FF8000 Flange Facer
Model FF8000 Flange Facer Machine Features Components & Accessories Specifications Technical Data Portable Machine Tools, Inc. Get big flange faces back in working condition - FAST! FF8000 Features Versatile
More informationParts & Service Savings
2018-2019 Parts & Service Savings Golf Course Sports Turf Grounds Management The Finch companies proudly serve the Golf Course, Sports Turf, and Grounds Maintenance markets across the Mid-Atlantic and
More informationMAXX-MINI LIFT Portable Lift Table. MAXX-MOBILE Tilt & Lift. MAXX-MOBILE SKID LIFTER Manual & Electric. MAXX-ERGO-LIFTER Electric MAXX-JACK
MAXX-MOBILE Tilt & Lift MAXX-MINI LIFT Portable Lift Table MAXX-MOBILE SKID LIFTER Manual & Electric MAXX-ERGO-LIFTER Electric MAXX-JACK Electric High Lift Lift Products, Inc. PO Box 349 Elm Grove, Wisconsin
More informationBrandt Automatic Edgebander Ambition 1650 C Servo
TECH SPEC PAGE 1 Brandt Automatic Edgebander Ambition 1650 C Servo NOTE: THE BELOW SPECS ARE THE ORIGINAL SPECIFICATIONS AND WE DO NOT GURANTEE THAT THE ITEMS BELOW ARE WITH THIS MACHINE. PC-20 Program
More informationOWNER S MANUAL. Model: MS-25BU ( ) (25 Bushel Pull-Behind Manure Spreader)
OWNER S MANUAL Model: MS-25BU (5301194) (25 Bushel Pull-Behind Manure Spreader) General Information Thank you for purchasing this product. The purpose of this manual is to assist you in operating and maintaining
More informationAttachments, Accessories, Upgrades
Options: Variety of Driven Unwinds Servo Cross Sealers and Cross Coolers Gussetters including disc style, stand-alone, and rail mounted Longitudinal Sealers Presealers Angle Sealers Handle Cut-out Patch
More informationCabinet Free Universal Assist Lifter Instructions
PART LIST 1 @ Left Undermount Bracket 1 @ Right Undermount Bracket 2 @ 1-5/16 Pivot Arm 2 @ 1-1/8 Bent Arms w/ Foams 2 @ M8 Bolt 1 @ 1-5/16 Coupler 2 @ Gas Shocks w/ Sliding Cylinder Mount 2 @ 3-1/4 x
More informationMORRISON MS-40C MATERIAL SPREADER
INSTRUCTION MANUAL & PARTS BOOK MORRISON MS-40C MATERIAL SPREADER POWERFUL - EFFICIENT - DEPENDABLE 25 INDUSTRIAL DRIVE, KEYPORT, NEW JERSEY, USA, 07735, 732-566-5400 FAX 732-5444 Doc. # OI M09203 PB M09203
More information20 Ton Variable Height Tripod Jack Model 718B
The Variable Tripod Jack is a 20 ton capacity single stage hydraulic jack designed primarily for use in aircraft maintenance. It consists of a tripod structure, hydraulic cylinder/reservoir assembly, adjustable
More informationRevision Date: 09/16/2015. Electrical Operated Stand Up Desk Assembly Guide for 60 & 48 Wide Split Top Desks
Revision Date: 09/1/2015 Electrical Operated Stand Up Desk Assembly Guide for 0 48 Wide Split Top Desks 2 / 20 Table of Contents Table of Contents........................................ 2 Warnings Guidelines....................................
More informationVegetable Cutters OPERATING / TECHNICAL MANUAL MANNHART. Model M V-1/2 HP Model M V-3/4 HP MANNHART
OPERATING / TECHNICAL MANUAL Vegetable Cutters Model M2000-115V-1/2 HP Model M3000-115V-3/4 HP Made in U.S.A. COMPLETE RANGE OF SLICERS, DICING GRIDS AND SHREDDERS AVAILABLE. EACH ACCESSORY SUPPLIED WITH
More informationBumble Bee. Please read and understand all instructions before building!
Bumble Bee The Bumble Bee kit contains all the parts necessary* to build a flying high power rocket: (1) Pre-slotted main airframe (1) Recovery tube (1) Nose cone (3) Fins (1) Piston ejection kit: (1)
More informationILLUSTRATED PARTS LIST THIS MANUAL CONTAINS THE ILLUSTRATED PARTS LIST FOR MODELS:
IPL MODEL STHM 7 1 0 1 1 2 1 0 2 ILLUSTRATED PARTS LIST THIS MANUAL CONTAINS THE ILLUSTRATED PARTS LIST FOR MODELS: STHM-2CV SM-1V SM-72A with a serial number of D00001 to D with a serial number of D00001
More informationContact-free Reel Mower
Contact-free Reel Mower model number 060-00-0 contact us: 866-8 IMPORTANT: Read and understand all safety rules and operating instructions before using this product. Instruction Manual model number 060-00-0
More informationCorken Compressor Repair
Corken Compressor Repair Click photo to make move Gauge Openings Inspection plate with model and serial #s Oil filter and oil pump assembly Crankcase breather vent Crankcase breather location. If excess
More informationIllustrated Parts Manual
Illustrated Parts Manual Electric Snow Thrower Model 050 & Flurry 1400 MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 Printed In USA Form No. 769-08048 (April 10, 2012) To The Owner Thank you for
More informationRemote Programming Guide
THE SHADE STORE MOTORIZATION Remote Programming Guide BY: THE SHADE STORE 11/4/2016 Table of Contents Each battery & plug-in motor from The Shade Store will come preprogramed from the factory. The preprograming
More informationINSTALLATION INSTRUCTIONS HAND OPERATED MODELS 140 AND 140-R BI-PART OPERATION
INSTALLATION INSTRUCTIONS HAND OPERATED MODELS 140 AND 140-R BI-PART OPERATION II. SUSPENDED TRACK (bi-part operation) 1. If the track is to be curved in the field, curve it now. Please refer to ADC Form
More informationBUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: TD-1100 SECTION: 66
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: TD-00 SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL JUNE, 00
More informationCALIFORNIA TRIMMER MOWER MAINTENANCE MANUAL
CALIFORNIA TRIMMER MOWER MAINTENANCE MANUAL 2 Table of Contents Section 1: General Information Page Handle Assembly Instructions 4 Maintenance All Models 6 Oil Change Procedures All Models 9 Height Adjustment
More informationSouthworth The Lift Table Experts
Southworth The Lift Table Experts Southworth was founded in and for the last plus years has been in the business of helping companies handle materials faster, safer and easier. Today, Southworth is the
More informationRL255/257/ Commercial Reel Mower
Illustrated ted Par arts Manual RL255/257/2510 25 Commercial Reel Mower Parts for the Original Trimmer Mowers and California Trimmer Mowers (one in the same, really) are interchangeable since 1941. Therefore
More information15QRHD Series Positive Feed Drill
15QRHD Series Positive Feed Drill January 2015 2014 APEX TOOL GROUP 1 Product Overview Productivity 1.0hp/1.5hp options at the spindle to maximize cutting speed Governed vane motor option to minimize speed
More informationAudionShrink I sealer & heatgun Audionpack L-sealers Shrink tunnels Automatic shrink wrap equipment Combi shrink/tunnel Conveyors
AudionShrink I sealer & heatgun Audionpack L-sealers Shrink tunnels Automatic shrink wrap equipment Combi shrink/tunnel Conveyors I-sealer & Heat gun The I-sealer 161B is very convenient for small production
More informationTyre Change Equipment Catalogue 2016
Tyre Change Equipment Catalogue 2016 Cobra Manufacturing PTY Ltd Custom Design & Engineering Specialists 100% AUSTRALIAN MADE Phone: +61755470611 Fax: +61755470611 Mobile: 04 098 956 77 E-mail: cobramanufacturing@bigpond.com.au
More informationTubing Cutters No. 101 Tubing Cutter Spare Cutter Wheel NOTE: Order parts by Catalog Number only. DO NOT order by Reference Number. Ref.
No. 0 Tubing Cutter Wheel Housing 0 Cutter Wheel Pin and Clip (Incl. Ref. No. ) E Cutter Wheel Stop Pin 0 Roll () Roller Pin () 0 Screw w/washer Knob Retaining Ring 0 Feed Screw Thrust Washer Roll Housing
More informationPANASONIC Models: MC-9410, MC-9420, MC-9430, MC-9440
Dust Cover and Attachments A1... P-12429... Indicator Plate, 9410 A1... P-12430... Indicator Plate, 9420 A1... P-12431... Indicator Plate, 9430 A1... P-12432... Indicator Plate, 9440 A2... P-12433... Indicator
More informationANSI B Index
Index A Abrasive disc wheels... 16 17, 79, 99 mounting... 39 40, 94 Abrasive flap disc wheels... 23 Abrasive wheel... 1, 89 Portable air grinding machines... 26 Acceptance of shipment... 27 Actuating controls...
More informationCord Operated Curtain Track Systems
Cord Operated Curtain Track Systems Application Chart Specification Weight Range Applications Single Stack Pair Stack Multiple Stack Asymetric Profile Profile Number Dimensions in mm Gliding Channel (mm)
More information120 Ton Tripod Jack Model 8811B
The Tripod Jack is a 120 ton capacity single stage hydraulic jack designed for use in aircraft maintenance. It consists of a tripod structure, hydraulic cylinder assembly, reservoir, valve block assembly,
More informationSpec # Information Requested Answer
Price quote for: Engine Driven Brush chipper File: C796-102012 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Tri-State Bobcat Patrick
More informationSpec # Information Requested Answer
Price quote for: Engine Driven Brush chipper File: C796-102012 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Tri-State Bobcat Patrick
More informationUniversal Super Shield & Ultimate Aluminum w/electric Drive Conversion Kits , , Installation Instructions
WLH 09/19/16 111-0215 & 112-0215 607-0026 For technical support call us at (800) 368-3075 or visit our website at PullTarps.com. TABLE OF CONTENTS ***Assembly*** Conversion Kit-Universal Super Shield ***Wiring,
More informationPoints of strength. 63F, availability of two drilling heads, with possibility fo horizontal and vertical drilling devices.
CNC GIOTTO 1 Points of strength Technology EASY USE, easy to use and simple to MOUNT TOOLS Machine ready for use and complete with standard tool support store and CAD station Suction cups made of aluminium
More informationGENUINE PARTS INSTALLATION INSTRUCTIONS
GENUINE PARTS INSTALLATION INSTRUCTIONS 1. 2. 3. 4. DESCRIPTION: APPLICATION: PART NUMBER: KIT CONTENTS: Security light Kit Maxima 999F4 AX009 - Universal Security Lighting Kit. Item QTY Description Service
More informationSpecifications Application For medium materials For heavy materials For extra heavy materials
LT2 B875 Mark II Twin Needle Needle Feed Split Needle Bar Lock stitcher with Large Hook (and Thread Trimmer) Specifications 3 5 7 Application For medium materials For heavy materials For extra heavy materials
More informationOperator s Manual Baler
Operator s Manual Operator s Manual 4600 Baler THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF HESSTON OR IT S SUCCESSORS. HESSTON AND IT S SUCCESSORS ARE NOT RESPONSIBLE FOR THE
More informationOEM TM-50 Quick Start Guide
This quick start guide provides basic setup and operating instructions for the OEM TM-50. The intended use of the OEM TM-50 Taping Machine is to produce taped reels of individually sealed and consistently
More informationOwners Manual MODEL 45 REEL MOWER MODELS & 45148
Owners Manual MODEL 45 REEL MOWER TM MODELS 45048 & 45148 TM Rover Mowers Limited Model 45 FOREWORD Thank you for buying a Rover Mower. This manual covers the operation and maintenance of the Rover Model
More informationBelt Driven. Conveyors (989) Roller Conveyors Belt Driven Live. Roller Conveyors
Belt Driven Live Conveyors Conveyors - 195 - Light Duty Transportation Type... 196 Minimum Pressure Accumulation Type... 198 Medium Duty Transportation Type... 200 Heavy Duty Transportation Type... 202
More informationRoller Shades CORD LOOP. Head Rail, Fascia and No Head Rail. Installation & Care Instructions
Roller Shades CORD LOOP Head Rail, Fascia and No Head Rail Installation & Care Instructions 152038 H 5/30/2017 GETTING STARTED A few simple tools are required: - Measuring tape - Power drill, drill bits
More informationThis TSI Service Bulletin replaces TSI , Cylinder Liner, D12, D12A, D12B, D12C ( ), publication no. PV776 TSP
Volvo Trucks North America, Inc. Greensboro, NC USA This TSI Service Bulletin replaces TSI 213 002, Cylinder Liner, D12, D12A, D12B, D12C (11.2001), publication no. PV776 TSP160571. Cylinder Liner TSI
More informationIMCGT7A12 Meat filling machine Series of Filling Machinery
IMCGT7A12 Meat filling machine Series of Filling Machinery INTERNATIONAL MACHINE CONCEPTS WELCOMES YOU TO YOUR NEW MACHINE Operation Manual: Date 2015. 1 CONTENTS Chapter 1 Machine Description 1.1 Uncrating
More informationCompany History. Picture was made in the year First living house including the workshop close to the former main road.
Company History Picture was made in the year 1950. First living house including the workshop close to the former main road. Main Information Of The Company Binderbegrer And Steps Of Growth: Founded in
More informationPROFESSIONAL BLENDERS
Instruction Manual Models: LI / LT / LV / LI-02 / LT-02 LI LT PROFESSIONAL BLENDERS LV 36204.2 - Maio/2009 SUMMARY 1. Introduction 01 1.1 Safety 1.2 Main Components 01 02 1.3 Technical Characteristics
More informationSpec # Information Requested Answer
Price quote for: Engine Driven Brush chipper File: C796-102012 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Tri-State Bobcat Patrick
More informationThe HMC Heavy Metal Chassis Construction Guide
The HMC Heavy Metal Chassis Construction Guide The Heavy Metal Chassis is constructed using two identical drive modules. The drive modules are constructed using 4 mechanical sub-assemblies. The drive modules
More informationwww MK-Electronic de Parts and Diagrams7
7 Right Hand Covers 7-2 Left Hand Covers 7-4 Center Covers 7-6 Electronics Module 7-8 Control Panels 7-10 Carriage Assembly 7-12 Scan-Axis Assemblies 7-14 Paper Path Assemblies 7-16 Media Entry Assemblies
More informationKEEP FOR FUTURE REFERENCE POWER TRANSFORMER READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT
KEEP FOR FUTURE REFERENCE P.O. Box 368 908 West Main Laurel, MT USA 59044 phone 800-548-7341 phone 406-628-8231 fax 406-628-8354 INSTRUCTIONS International Version MODEL NUMBER: EO6VA POWER TRANSFORMER
More informationSuper 7R Edger. Parts and Service Manual. Section II (78155C) Clarke American Sanders Super 7R Operator's Manual Page 9
Super 7R Edger Section II Parts and Service Manual (78155C) Clarke American Sanders Super 7R Operator's Manual Page 9 MAINTENANCE Maintenance and repairs performed by unauthorized personnel could result
More information// TITAN SCISSOR LIFT TABLE
Titan Heavy Duty Scissor Lift Tables Strength and Flexibility The Titan Heavy Duty Scissor Lift Table family is designed to combine the size and flexibility of a small lift with the lifting capacity of
More informationInstruction Manual. Note: Owner/Operator must read and understand this instruction
Instruction Manual HEX300 HEX500 Note: Owner/Operator must read and understand this instruction manual before using the table. Lift Table HEX Series HEX300, HEX500 Operation and Service Manual BEFORE OPERATING
More informationCellular Shades MOTORIZED SHADE Top Down - Bottom Up. Installation & Care Instructions
Cellular Shades MOTORIZED SHADE Top Down - Bottom Up ucontact@udoblinds.com 1-855-205-8442 Installation & Care Instructions 152746A 7/2/2018 GETTING STARTED A few simple tools are required: - Measuring
More informationASVC2 OWNER S MANUAL. Vane Cutter PART # MACHINERY DIVISION
A S ASVC2 Vane Cutter PART # 43013 MACHINERY DIVISION OWNER S MANUAL -1- INTRODUCTION The ASVC2 Hollow Vane Cutting Machine was designed utilizing the best current technology to provide greater reliability.
More informationSpedo 2300 Forms Cutter
Spedo 2300 Forms Cutter The SPEDO 2300 high performance forms cutter surpasses the boundaries of continuous forms processing whilst improving the flexibility, accuracy and reliability demand by today's
More informationCarbon Fiber Air Shafts. Custom Carbon Fiber Tubes
Carbon Fiber Air Shafts Lightweight composite air shafts... with custom performance by design. NimCor offers an outstanding line of precision engineered carbon fiber shafts with unique performance features.
More informationThe Caldwell Group Fax
Model 82NC - Narrow Coil C Hook *Will not hang level when empty. Center of gravity must be centered under crane hook to prevent tilting of the lifter & load. Handles narrow coils with less coil edge damage.
More informationGENUINE PARTS INSTALLATION INSTRUCTIONS
GENUINE PARTS INSTALLATION INSTRUCTIONS 1. 2. 3. 4. DESCRIPTION: APPLICATION: PART NUMBER: KIT CONTENTS: Accent light Kit Pathfinder 999F3 XZ000 - Accent Lighting Kit. Item QTY Description Service Part
More informationLift Tables. Distributed by Ergonomic Partners Web: PH: FAX:
Lift Tables Distributed by Ergonomic Partners Email: sales@ergonomicpartners.com Web: www.ergonomicpartners.com PH: 314-884-8884 FAX: 800-570-5584 making work faster, safer, and easier since 1890 Southworth...
More informationFLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES
FLORIDA SHERIFFS ASSOCIATION & FLORIDA ASSOCIATION OF COUNTIES Name of Dealership Type of Vehicle Zone 10 CU YD COMBINATION SEWER CLEANING/VACUUMING MACHINE (Specification #50) Base Unit Price Pat's Pump
More informationSUPER TUBE-TUGGER Continuous Tube Extractor For 1-1/2 2 Tube OD ( )
www.elliott-tool.com TM-42 Rev. 9/20/04 Elliott offers a complete line of precision tube tools, including: tube expanders Boiler Expanders Heat Exchanger Expanders Condenser Expanders Refinery Expanders
More information1800 PRINTER APPLICATOR MAINTENANCE & SERVICE MANUAL (REVISION b1.x)
1318 QUAKER CIRCLE P.O. BOX 589 SALEM, OHIO 44460 PHONE: 330-332-1800 FAX: 330-332-2144 www.ctmlabelingsystems.com Designers and Manufacturers of Pressure Sensitive Labeling Equipment and Custom Product
More informationBERKEL TENDERIZERS. Fits 703, 704, 705
National Band Saw, Established1953 34 BERKEL Fits 703, 704, 705 BT012 Capacitor Cap BT014 Switch Boot BT011 Motor Starting Capacitor (216-260 mfd) BT005 Rocker Switch BT013 Magnet Assy These magnets have
More informationInstallation Instructions
Roller & Roman Shades Lifting Systems Cassette EZ Lift Cordless EZ Pull Standard and Cassette R-Series Clutch SL-Series Clutch Spring Roller Fascias and Valances 3, 4 Flat and 4 Curved Fascia 5 Fascia
More informationIdentify and Assemble the Pneumatic Components
Identify and Assemble the Pneumatic Components The 5 Basic Components The Standard GEARS-IDS Pneumatic system is comprised of 5 components. The Reservoir Stores Potential Energy in the form of compressed
More informationWOOD CHIPPER WC1103 5PQ (8/02/12)
O P E R A T O R ' S M A N U A L WOOD CHIPPER WC1103 5PQ990101 (8/02/12) To the Owner; Thank-You for choosing a quality product from Frontier Equipment. We strive to give you the best equipment and the
More informationILLUSTRATED PARTS LIST
IPL MODEL STHM 71 72 1 7 7 ILLUSTRATED PARTS LIST 70 2 7 THIS MANUAL CONTAINS THE ILLUSTRATED PARTS LIST FOR MODELS: STHM - 2CV with a serial number of 00001-0 SM-1A with a serial number of 001- SM-72A
More informationPARTS CATALOGUE FOR COMPUTERIZED SEWING MACHINE
PARTS CATALOGUE FOR COMPUTERIZED SEWING MACHINE PC-8500 SUPER GALAXIE 2100 1. 1999. CONTENTS (1) PRINCIPAL PARTS... 2 (2) UPPER SHAFT AND NEEDLE BAR... 4 (3) FEED MECHANISM... 8 (4) ROTARY HOOK, THREAD
More informationMobile 44 (0) Phone 44 (0) CHAPTER THREE Pipe Beveling Series
CHAPTER THREE Series MiniLathe power STaNDarD capacity* STD. LocKINg range* FeeD STroKe TorQUe MiniLathe Recommended for 2,2 kw 72 356,0 mm 72 348,0 mm 50 mm choice of three 3,0 hp 2,8 14,0 2,8 13,7 2
More information