TPART 1 PRODUCT SPECIFICATIONS...1.

Transcription

1 7 APPENDIX 7. MAINTENANCE 7 7 No. Item Name Hanger Wireless Receiver Top cover Fix board of wireless Receiver. Lens. Plastic cover for fixing lens. Plastic cover for fixing lens. Fixed board for zoom Connecting bracket for zoom. Zooming supporter Zooming pillar Light Guid Bart light barrier. Body cover A Arm Lithium battery Foam pad. Lithium battery holder. Wireless receiver board. Driver board Ḋisplay board. Recharge socket A. Bearer for recharge socket A PCB holder. Button of display board Full-featured control panel. Foot. Power switch. Body cover B. Cooling aluminum. Led board. Zooming nut. Zooming screw. Connector for lens Fixed board for LED charge indicator. LED charge indicato. USER MANUAL 4X0W RGBW 4 IN Led Wireless Battery Zoom Light Please Read Over This Manual Before Operating The Light Fixture

2 ABLE OF CTENTS TPART PRODUCT SPECIFICATIS CHARGER SPECIFICATIS Voltage: AC00-40V, 50/60Hz Output: DC4V, A.--TECHNICAL SPECIFICATIS....--DIMENSIS....--SAFETY WARNING... Charger +ve Charger -ve PART INSTALLATI OPERATING POSITI CHARGING INPUT OPERATI OTHER OPERATIS PART USING THE BASIC EDIT STATIC COLOUR ACTIVATING AUTO PROGRAMS DMX5 SETTINGS RUN MODE PERSALITY SPECIAL SETTINGS EDITING CUSTOM PROGRAMS WHITES CALIBRATI RGB CALIBRATI WDMX SETTINGS FLIGHTCASE SPECIFICATIS Voltage: AC00-40V, 50,60Hz Rated Power: 00W Weight: KG Dimensions: 70 x 400 x 50mm PART 4 USING DMX5 CTROLLER BASIC ADDRESSING ASSIGNMENT PART 5 EASYPLAY REMOMTE CTROL KEY S STATIC CTROLS EFFECT CTROLS COLOR CTROLS IMPORTANT FACTS: CHARGING DO NOT CHARGE FOR MORE THAN 4HRS RECHARGE WITHIN DAYS OF USE CHARGE WITH FLIGHTCASE OPEN HOW TO CARE FOR YOUR BATTERY! STORING STORE WITH FULL LOAD TURN AT BASE WHEN STORING FOR MORE THAN 7 DAYS STORE IN AN UPRIGHT POSITI PART 6 BATTERY CHARGING...6. PART 7 APPENDIX MAINTENANCE...7 7

3 6 BATTERY CHARGING PRODUCT SPECIFICATIS 6. BATTERY SPECIFICATIS: Type of bettery:lithium Battery Voltage: 4V Storage Capacity: 8800mA Charge Time: 8 hrs Discharge Time: 8hrs (in fixture at full output) Weight:.Kg Dimensions:5X65X76mm. TECHNICAL SPECIFICATIS LED MODULE LED MODULE: Voltage Zoom Range Power Type of bettery IP Rating Balck Red Operation Temperature 4pcsx0W RGBW 4 in LED 4VDC 7~60º 40W Lithium Battery IP 44 0 ~5 (operating) 0 ~5 (startup) y r e tt a B Dimensions Weight. 70x60x60mm 4.5Kg DIMENSIS 6. SPECIAL CSIDERATIS : Charging Do not charge for more than 4 hours Always charge with flightcase open It is recommended to charge at a temperature between 0 to 5 Always recharge within days of use Always charge with supplied charger Operation Recommended ambient temperature is between 0 to 5 Always use fixture in a vertical or near-vertical position (<0deg. from vertical) Do not operate in a sealed enclosure with insufficient air flow Storage Always store at a temperature below 5 (below 5 is best) Always store in a vertical position Always store fully charged It is important to carry out one full discharge and charge cycle every months Always use the battery switch when storing for longer than 7 days Store in a dry environment away from direct sunlight Maintenance Always switch off the battery switch when carrying out maintenance Do not allow battery contacts come into contact with fixture housing Do not link the positive and negative terminals in any way 6

4 . SAFETY WARNING IMPORTANT ALWAYS READ THE USER MANUAL BEFORE OPERATI. PLEASE CFIRM THAT THE POWER SUPPLY STATED THE PRODUCT IS THE SAME AS THE MAINS POWER SUPPLY IN YOUR AREA. This product must be installed by a qualified professional. Always operate the equipment as described in the user manual. A minimum distance of 0.5m must be maintained between the equipment and combustible surface. The product must always be placed in a well ventilated area. Always make sure that the equipment is installed securely. Do not stand close to the equipment and stare directly into the LED light source. Always disconnect the power supply before attempting maintenance. Always make sure that the supporting structure is solid and can support the combined weight of the products. The earth wire must always be connected to the ground. Do not touch the power cables if your hands are wet. ATTENTI Do not operate in a sealed enclosure with insufficient air flow Do not operate in an environment with temperatures in excess of 45deg. C. Do not operate store in close proximity to source of fire. Always charge with supplied charger Do not charge for more than 4 hours Always turn off battery storage switch when storing for longer than 7 days Always store with full load Always charge with flightcase open Always carry out one full discharge and charge cycle every months Always store in a dry environment away from direct sunlight GETTING STARTED. OPERATING POSITI This lighting fixture is powered using a Lithium Battery which requires that the correct product orientation is always maintained for operation

5 AR.S DIMMER GREEN 4 ZOOM RANGE (7~60º) Zoom Range 60º Zoom Range 7º 5 WHITE 6 STROBE HSV HUE SATURATI 5 OPERATI WITH WIRELESS DMX. BATTERY CHARGING INPUT WIRELESS RECEIVING ANTENNA Charger -ve Charger +ve W-DMX TRANSMITTER BATTERY CHARGING INPUT Battery charging input 5. When using this lighting fixture with W-DMX receiver installed inside, the fixture may be placed at a range of 00m from W-DMX transmitter 5. Select DMX from the <RUN> menu. 5. Select ACTI from the <WDMX> menu and proceed to turn the WDMX. If the WDMX receiver card is already paired with a WDMX transmitter then the fixture is ready for receiving DMX signal. If the WDMX receiver card needs to be paired with a new WDMX transmitter, select YES from the <WDMX >/<> menu. The green signal indicator LED will not show which confirms that WDMX receiver card is unpaired and ready for new pairing. Do not connect DMX Only for specified charger(in flight case or single charger) Do not connect any other data cables 4

6 . GENERAL OPERATI ARC. / Switch Zoom Knob GREEN IR Receiver Power Status GREEN: >70% YELLOW: >0% : EMPTY.. POWER STATUS During operation, the Power Statuas indicator will indicate the amount of battery power that is remaining. The battery should be recharged when is shown. During charging, the Power Statuas indicator will indicate the amount of battery power that has been charged to the battery. When the battery is fully charged the GREEN LED will immediately switch off. In the event that the battery storage switch is, it is not possible to charge the battery. In this case, when the mains power is connected to the fixture, the Power Statuas indicator will show GREEN for 0 seconds and then fade out. This shows that electrical contact has been made between the lighting fixture and the battery charging system. The Battery Storage Swicth must be in order to charge the battery. In order to check the current status of the battery, the battery charging system should be turned. The fixture can then be turned using the EVENT / button and the Power Statuas can be checked. ARR.D ARC 4 MASTER DIMMER GREEN.. / SWITCH Press the SWITCH / button for seconds to turn on/off lighting fixture (when BATTERY SWITCH is ) SWITCH / button indicator LED when showing constant indicates lighting fixture is power ( when slowly flashing indicates that DMX data is successfully received).4 OTHER OPERATIS POWER / 4 GREEN WHITE BATTERY CHARGING INPUT DISPLAY AR.D DIMMER.4. ANTENNA RELEASE When releasing support antenna with hand.4. BATTERY SWITCH for operation/charging for storage (>7 days) for maintenance Always use the Battery Switch when storing for more than 7 days Battery Switch must be for operation and charging GREEN 4 5 WHITE 4

7 5 WHITE5:5600K USING THE. BASIC WHITE6:5900K WHITE7:6500K The LED fixture is mounted with a LCD display And 4 control buttons WHITE8:700K 4 45 WHITE9:8000K ENTER UP DOWN WHITE0:8500K WHITE:0000K STROBE NO ~0Hz ENTER scroll through the main menu or return to the main menu enter the currently selected menu or confirm the current function value scroll 'UP' through the menu list or increase the value of the current function scroll 'DOWN' through the menu list or decrease the value of the current function 0 40 AUTO NO AUTO 5 60 AUTO 6 70 AUTO 7 80 AUTO AUTO 5 STAT AUTO GREN WHITE STRB AT.0 AT.0 PR.0 R. G. B. B. S.(0~0) 9 00 AUTO AUTO 7 0 AUTO 8 0 AUTO 9 40 AUTO PR PR.0 RUN ADDR PERS PR.0 DMX SLAV D.(00~5) TOUR Tr6 ARC. AR.D ARC. AR.D AR.S HSV PR.0 PR.04 PR.05 PR.06 PR.07 PR.08 PR.09 PR.0 SET KEY UPLD COLOR DIM CURV DERR PASS PASS RGBW UC DIM4 DIM DIM DIM Cv Cv Cv SAVE BLAK SEND END END 4 AUTO SPEED ADJUSTMENT When using CH0,AUTO0-AUTO0, this function activated DIMMER SPEED SLCK STRB LIFE SPEC CLAS LG NORM 0 9 PRESET DIMMER SPEED FROM DISPLAY LINEAR DIMMER N LINEAR DIMMER (fastest) N LINEAR DIMMER N LINEAR DIMMER N LINEAR DIMMER 4(slowest) EDIT PR.0 PR.0 SC.0 SC.0 GREN WHITE STRB TIME FADE R. G. B. W. S.(0~0) T. F. 5

8 CAL **** CAL WH.0 WH. GREN R. G. B. TR6 WDMX ACTI CAL RGB.W R. GREN G. B. NO YES OK MASTER DIMMER. EDIT STATIC COLOUR STAT STATIC COLOUR Red Green Blue White Strob (0~0) Combine Red, Green, Blue and White to create an infinite range of colors (0-55) Set the value of the Strobe (0-0Hz).4 ACTIVATING AUTO PROGRAMS AUTO AUTO AT.0 AT.0 PR.0 PR.0 Select the target AUTO program and press ENTER. Programs AT.0 to AT.0 are fully pre-programmed and will not be altered by changes in EDIT mode. Programs PR.0 to PR.0 are fully pre-programmed and can be edited in EDIT mode..5 DMX5 SETTINGS DMX DMX D(00~5) Enter the DMX mode to set the DMX ADDRESS..6 RUN MODE RUN RUN DMX SLAV MASTER DIMMER FINE 4 FINE 5 GREEN 6 GREEN FINE 7 8 FINE 9 WHITE 0 WHITE FINE COLOR MACRO&WHITE 0 0 NO 0 00%/GREEN UP/0% 50 DOWN/GREEN 00%/0% %/GREEN 00%/ UP %/GREEN DOWN/ 00% 9 0 UP/GREEN 0%/00% 0 00%/GREEN 0%/BLU EDOWN 50 00%/GREEN UP/ UP 5 70 DOWN/GREEN DOWN/ 00% %/GREEN 00%P/00% 0 05 WHITE:00K 06 0 WHITE:400K 5 WHITE:400K 6 0 WHITE4:4900K Enter the RUN mode to set working mode. DMX mode is for using the DMX5 controller to control the fixtures. SLAV mode is for Master -- Slave operation. 6

9 WHITE5:5600K WHITE6:5900K WHITE7:6500K.7 PERSALITY PERSALITY PERS TOUR ARC. AR.D HSV BLOC 6 40 WHITE8:700K 4 45 WHITE9:8000K WHITE0:8500K 5 55 WHITE:0000K STROBE NO 55 ~0Hz AUTO 0 40 NO 4 50 AUTO 5 60 AUTO 6 70 AUTO 7 80 AUTO AUTO AUTO 6 Enter the PERSALITY mode to select DMX mode: TOUR, TR6, ARC., AR.D, ARC., AR.D, AR.S or HSV.8 SPECIAL SETTINGS SET KEY UPLD COLOR DIM CURV DERR SLCK STRB LIFE PASS PASS RGBW UC DIM4 DIM DIM DIM Cv Cv Cv SAVE BLAK SPEC CLAS LG NORM SEND END END AUTO 7 0 AUTO 8 0 AUTO 9 40 AUTO PR PR PR PR PR PR PR.07 0 PR.08 0 PR PR.0 AUTO SPEED ADJUSTMENT When using CH0,AUTO0-AUTO0, this function activated DIMMER SPEED 0 9 PRESET DIMMER SPEED FROM DISPLAY 0 9 LINEAR DIMMER 0 69 N LINEAR DIMMER (fastest) 70 9 N LINEAR DIMMER 0 89 N LINEAR DIMMER 9 N LINEAR DIMMER 4(slowest) SETTING KEY Enter the KEY mode to select whether the access password is on or off. When the fixture is set as PASS, after 0 seconds or turn on the fixture next time, the fixture will need an access password to enter the display menu control. Note: The factory access password is UP + DOWN + UP + DOWN, then press ENTER to confirm the access. Select UPLD to upload the custom programs from the current MASTER unit to the SLAVE units. In order to activate the upload function the password must be entered. Password is the same as the main access password. When uploading the MASTER and SLAVE units will display YELLOW. If an error occurs when uploading the MASTER and/or SLAVE units will display. On successful uploading of the custom programs the MASTER and SLAVE units will display GREEN. In order to reset custom modes to default values select. COLOR is for activate/unactivate the color calibration functions. When RGBW is selected, on RGBW = 55,55,55, 55 the color is displayed as calibrated in CAL -- RGBW. When COLOR is set, on RGBW = 55,55,55,55 the RGBW values are not adjusted and the output is most powerful. When [UC] is selected, the RGB output are adjusted to a standard preset universal color which balances fixtures from different generations.. LIFE BATTERY LIFE ; LG for extended battery operation (approx. 0hrs), NORM for standard battery operation (approx. 8hrs). 0 7

10 .9 EDITING CUSTOM PROGRAMS EDIT CUSTOM EDIT PR.0 SC.0 PR.0 SC.0 Red Green Blue White Strobe Time Fade (0~0) 4 USING A DMX5 CTROLLER 4. BASIC ADDRESSING Set the DMX5 address in the DMX menu. It is possible to have the same DMX address or independent addresses for each fixture. Enter the EDIT mode to edit the custom programs PR.0 to PR.0. Each custom program has 0 steps that can be edited. Each step allows the creation of a scene using Red, GREEN Green, Blue, STROBE Strobe, TIME Time & FADE Fade..0 WHITES CALIBRATI CAL CAL CAL CAL WT0 WT0 WT RGBW Red Green Blue Red Green Blue Enter the CAL to select white color of different color temperature. There are pre-programmed White colors can be edited by using Red, Green & Blue. 4. ASSIGNMENT Note:This product has six DMX5 channel configurations: TOUR, TR6, ARC., AR.D, ARC., AR.D, AR.S and HVS. TOUR 4 5 MASTER DIMMER (or STEP TIME when CUS.0-CUS.0 in CH0 is activated) GREEN (or FADE TIME when CUS.0-CUS.0 in CH0 is activated) White CAL Enter the CAL to adjust the RGB parameter to make different whites. When the new setting is activated, the DMX controller choose RGB = 55,55,55, the white color will be made by the actual RGB values on the CAL.. WDMX SETTINGS WDMX WDMX ACTI NO YES OK NO 0 00%/GREEN UP/0% 50 DOWN/GREEN 00%/0% %/GREEN 00%/ UP %/GREEN DOWN/ 00% 9 0 UP/GREEN 0%/00% 0 00%/GREEN 0%/BLU EDOWN 50 00%/GREEN UP/ UP 5 70 DOWN/GREEN DOWN/ 00% %/GREEN 00%P/00% 0 05 WHITE:00K 06 0 WHITE:400K Enter WDMX menu to change WDMX settings Enter the ACTI menu to turn / WDMX functionality Enter the menu to reset the WDMX pairing (note that only when the WDMX receiver card is reset can it be paired with a new WDMX transmitter card) WHITE:400K WHITE4:4900K 8 9