V1000. YASKAWA AC Drive Compact Vector Control Drive NEMA4X/IP66

Size: px

Start display at page:

Download "V1000. YASKAWA AC Drive Compact Vector Control Drive NEMA4X/IP66"

Cornelia Fowler
5 years ago
Views:

1 YSK C rive Compact Vector Control rive V000 NEM4X/IP66 00 V CLSS, TREE-PSE INPUT: 0. to 8.5 k 00 V CLSS, SINGLE-PSE INPUT: 0. to.0 k 400 V CLSS, TREE-PSE INPUT: 0. to 8.5 k Certified for ISO900 and ISO400 JQ-QM49 JQ-EM00

Photo courtesy of MRUYSU KIKI Co.,LT. UL, CE approval pending NEM4X/IP66 Total protection from water and dust The V000 NEM4X/IP66 is fullyenclosed, waterproof drive for installation anywhere.

2 Photo courtesy of MRUYSU KIKI Co.,LT. UL, CE approval pending NEM4X/IP66 Total protection from water and dust The V000 NEM4X/IP66 is fullyenclosed, waterproof drive for installation anywhere. Protective exterior allows for spray-washing. Large key operator located on the exterior makes it easy to adjust drive settings without needing to open the enclosure. The V000 NEM4X/IP66 is one of Yaskawas current vector control V000 series drives, capable of running both induction motors and synchronous motors. -enclosed design eliminates the need for a separate protective panel. Option units are available for all major serial networks. Major pplications Enclosure Standards Standard egree of Protection NEM National Electrical Manufacturers ssociation IEC International Electrotechnical Commission Resistance to Chemicals and Solvents Chemicals NEM 4X IEC IP66 ydrochloric acid (0% max.) Sulfuric acid (0% max.) Nitric acid (0% max.) mmonia water Sodium chloride escription Totally, protects against dust. ater projected in powerful jets against the enclosure from any direction shall have no harmful effects. Note : Cannot be submerged in water. Solvents Methanol Vegetable oil Ethanol Mineral oil Silicon oils Soybean oil Glycol oil Note:. Contact Yaskawa for details on the tolerances to other chemicals and solvents.. o not allow a constant stream of chemicals or solvents to be sprayed directly onto the drive, as this may damage the drive.. Refer to the NEM4X/IP66 Installation Manual (TOBP C ) for details. Conveyors Food processing Printing oodworking Tea leaf curing Metalworking Textiles

3 Standard Specifications 00 V Phase/Single- Three-Phase CIMR-V G Single-Phase CIMR-VB G Normal uty Max. pplicable Motor Rated Output Current k eavy Max. pplicable Motor k uty Rated Output Current Rated Voltage/Rated Frequency Three-phase power supply: Three-phase 00 to 40 V 50/60 z Single-phase power supply: Three-phase 00 to 40 V 50/60 z CIMR-V 0008 and 000 are available in Japan only. The value in the parenthesis applies to the single-phase drive. 400 V Normal uty eavy uty CIMR-V4G Max. pplicable Motor Rated Output Current Max. pplicable Motor Rated Output Current k k Rated Voltage/Rated Frequency Note: Refer to the V000 Catalog (KEP C ) for details Three-Phase 80 to 480 V 50/60 z Common Specifications Item Overload Tolerance Control Method Frequency Control Range Frequency ccuracy (Temperature Fluctuation) Frequency Setting Resolution Output Frequency Resolution Frequency Setting Signal Starting Torque Speed Control Range Speed Control ccuracy Speed Response Torque Limit ccel/ecel Time Braking Torque V/f Characteristics Main Control Functions Installation rea Environment rea of Use mbient Temperature Storage Temperature Surronding rea ltitude Shock Specifications Normal uty Rating: 0% of rated output current for 60 s. eavy uty Rating: 50% of rated output current for 60 s.(erating may be required for repetitive loads) Open Loop Vector Control (Current Vector), V/f Control, dvanced Open Loop Vector Control for PM 0.0 to 400 z igital input: within ±0.0% of the max. output frequency ( 0 to +50 C) nalog input: within ±0.% of the max. output frequency (5 C±0 C) igital input: 0.0 z, nalog input: /000 if max. frequency /000 0 bit of maximum output frequency (parameter E-04 setting) Main frequency reference: 0 to +0 Vdc (0 kω), 4 to 0 m (50 Ω), 0 to 0 m (50 Ω) Main speed reference: Pulse train input (max. z) 00% / 0.5 z (assumes eavy uty rating IM of.7 k or less using Open Loop Vector Control), 50% / 6 z (using dvanced Open Loop Vector Control for PM) :00 (Open Loop Vector Control), :0 to 40 (V/f Control), :0 (dvanced Open Loop Vector Control for PM) ±0.% in Open Loop Vector Control (5 C±0 C) 5 z in Open Loop Vector (5 C ±0 C) (excludes temperature fluctuation when performing Rotational uto-tuning) Open Loop Vector Control allows separate settings in four quadrants 0.0 to s (4 selectable combinations of independent acceleration and deceleration settings) Short-time decel torque: over 50% for 0./0. k motors, over 00% for 0.4/0.75 k motors, over 50% for.5 k motors, and over 0% for. k and above motors (overexcitation braking/igh Slip Braking: approx. 40%) Continuous regen. torque: approx. 0% (approx. 5% with dynamic braking resistor option: 0% E, 0 s, internal braking transistor User-selected programs, V/f preset patterns possible Momentary power loss ride-thru, Speed search, Overtorque detection, Torque limit, 7-step speed (max), ccel/decel time switch, S-curve accel/decel, -wire sequence, uto-tuning, well, Cooling fan on/off switch, Slip compensation, Torque compensation, Frequency jump, Upper/lower limits for frequency reference, C injection braking at start and stop, igh slip braking, PI control, Energy saving control, MEMOBUS comm. (RS-485/4 max, 5. kbps), Fault restart, pplication presets, riveorksez (customization function), Removable terminal block with parameter backup function, Safe isable inputs... Condition Indoors 0 to +40 C Note: To ensure reliability, avoid using the V000 NEM4X/IP66 in areas with sudden, drastic temperature changes 0 to +60 C Note: Shot-term temperature allowed during transportation Install the drive to an are free of : corrosive or flammable gas radioactive materials direct sunlight combustible materials (e.g., wood) harmful gases 000 m or lower 0 to less than 0 z (9.8 m/s ) max., 0 to 55 z (5.9 m/s ) max. Peripheral evices and Options lthough the V000 NEM 4X/IP66 is compatible with all V000 options and peripherals, those options may not be waterproof. The following options cannot be used because installation requires modification to the fully-enclosed design. Options Incompatible with V000 NEM4X/IP66 4 V Power Supply : PS-V0SPS-V0M LC Operator : JVOP-80 LE Operator : JVOP-8

4 Number Key CIMR-V 000 Yaskawa C rive V000 Series G esign Revision Order T Region Code Japan sia B 4 Voltage Single-phase 00 V Three-phase 00 V Three-phase 400 V Customize Specification Standard Output Current Note: Refer to the specification table for the standard model. G Protective esign NEM4X/IP66 Environmental Specification imensions (mm) 4-M5 t 4-M6 t Figure Figure 4-M6 t 4-M6 t Figure Figure 4 Voltage 00 V 00 V (Single- 400 V rive CIMR-V 000G 000G 0004G 0006G 0008G 000G 00G 008G 000G 000G 0040G 0056G 0069G B000G B000G B000G B0006G B000G B00G 4000G 4000G 40004G 40005G 40007G 40009G 400G 4008G 400G 400G 4008G Figure imensions(mm) t eight (kg) Cooling Fan Fan

5 Recommended Parts Installation requires some components sold separately. Recommended parts are listed below. Cable Glands Seiwa Electric, MFG. Co. Ltd. Main Circuit Cable Glands Voltage rive CIMR-V rive Side ccess ole iameter(mm) Input ole (Number of holes: ) Output ole (Number of holes: ) Option ole (Number of holes: ) iring iameter (mm) Cable Glands 000G 000G 0004G 0.5 to.5 SCL G 00 V 0008G 000G 00G 008G 000G 0.6 to. to 4 4. to 6 SC-4 SC-4B SC-4C 000G 0040G 0056G 0. to. to 4.5 SC-6M SC G to SCL-8 B000G 00 V B000G 0.5 to.5 SCL-4 (Single- B000G B0006G 0.6 to SC-4 B000G. to 4 SC-4B B00G 4. to 6 SC-4C 4000G 4000G 0.5 to.5 SCL G 400 V 40005G 40007G 40009G 400G 4008G 0.6 to SC-4 400G 400G 0. to SC-6M 4008G Control Circuit Cable Glands Voltage rive Side ccess oles Cable Glands Control Circuit ole iameter (mm) Number of oles iring iameter (mm) 6. to 7.5 SC-M ll s 7.6 to to to.5 SC- SC-B SCL-4.5 to 4.5 SCL-4B Cable Gland Installation Cable Gland imensions SCL- Series SC- Series Option hole Input hole Parallel pipe threads Body Cap Screw Body Cap Output hole Lock nut Control circuit holes Lock nut Rubber packing Installation plate Lock nut Rubber packing Installation plate Cable gland Cable

6 V000 NEM4X/IP66 Recommended Parts Continued Installation requires some components sold separately. Recommended parts are listed below. / older Install a fuse to the drive input terminals to prevent damage in case a fault occurs. Refer to the instruction manual for information on UL-approved components. [Fuji Electric] Connection iagram C Input Power Supply (example shows two V000 drives connected in parallel.) Refer to the standard connection diagram in the V000 Catalog ( KEP C ) for use with C power supply. C power supply (converter) + + U/T V/T /T V000 U/T + _ V/T /T V000 M M Note: hen connecting multiple drives together, make sure that each drive has its own fuse. If any one fuse blows, all fuses should be replaced. Three-Phase 00 V CIMR-V Code C Power Supply / C Power Supply Rated Short-Circuit Qty. Breaking Current (k) older Code Qty. Figure 000 CR6L-0/UL FU CR6L-0/UL FU CR6L-0/UL FU CR6L-0/UL FU00088 CMS-4 FU CR6L-50/UL FU CR6L-50/UL FU CR6L-50/UL FU CR6L-75/UL FU CR6L-75/UL FU CR6L-00/UL FU00097 CMS-5 FU CR6L-50/UL FU CR6L-50/UL FU CR6L-00/UL FU00099 Note Multiple fuses are needed when using an C power supply. : C power requires only two fuses. Note: Manufacturer does not recommend a specific fuse holder for this fuse. Contact the manufacturer for information on fuse dimensions. Single-Phase 00 V C Power Supply / C Power Supply older CIMR-VB Rated Short-Circuit Code Code Qty. Qty. Figure Breaking Current (k) 000 CR6L-0/UL FU CR6L-0/UL FU00088 CMS-4 FU CR6L-50/UL FU CR6L-75/UL FU CR6L-00/UL FU CR6L-00/UL FU00097 CMS-5 FU CR6L-50/UL FU0009 Three-Phase 00 V CIMR-V4 imensions (mm) Code C Power Supply / C Power Supply Rated Short-Circuit Qty. Breaking Current (k) older Code Qty. Figure 000 CR6L-0/UL FU CR6L-0/UL FU CR6L-50/UL FU CR6L-50/UL FU CR6L-50/UL FU00095 CMS-4 FU CR6L-50/UL FU CR6L-50/UL FU CR6L-50/UL FU CR6L-75/UL FU CR6L-00/UL FU00097 CMS-5 FU CR6L-50/UL FU0009 : Multiple fuses are needed when using an C power supply. C power requires only two fuses M6 8 ia. 5 ia Insulation R6 cover Insulation 54 R8 cover 5 7 Figure Figure : Mounting components supplied separately. Tighten bolt when fuse is installed M0 ia. 6 ia. RIVE CENTER (INVERTER PLNT) --, Nishimiyaichi, Yukuhashi, Fukuoka, 84-85, Japan Phone Fax YSK ELECTRIC CORPORTION New Pier Takeshiba South Tower, -6-, Kaigan, Minatoku, Tokyo, , Japan Phone Fax YSK MERIC, INC., Norman rive South, aukegan, IL 60085, U.S.. Phone -800-YSK (97-59) or Fax YSK ELÉTRICO O BRSIL LT. 777, venida Piraporinha, iadema, São Paulo, , Brasil Phone Fax YSK EUROPE Gmb 85, auptstraβe, Eschborn, 65760, Germany Phone Fax YSK ELECTRIC KORE CORPORTION 9F, Kyobo Securities Bldg., 6-4, Yeouido-dong, Yeongdeungpo-gu, Seoul, 50-77, Korea Phone Fax YSK ELECTRIC (SINGPORE) PTE. LT. 5, Lorong Chuan, #04-0, New Tech Park 55674, Singapore Phone Fax YSK ELECTRIC (TILN) CO., LT. 59, st-5th Floor, Flourish Building, Soi Ratchadapisek 8, Ratchadapisek Road, uaykwang, Bangkok 00, Thailand Phone: Fax: PT. YSK ELECTRIC INONESI Secure Building-Gedung B Lantai asar & Lantai Jl. Raya Protokol alim Perdanakusuma, Jakarta 60, Indonesia Phone Fax YSK ELECTRIC (CIN) CO., LT. F, One Corporate venue,, ubin Road, Shanghai, 000, China Phone Fax YSK ELECTRIC (CIN) CO., LT. BEIJING OFFICE Room 0, Tower Oriental Plaza, East Chang n ve., ong Cheng istrict, Beijing, 0078, China Phone Fax YSK ELECTRIC TIN CORPORTION 9F, 6, Nanking E. Rd., Sec., Taipei, 04, Taiwan Phone Fax YSK INI PRIVTE LIMITE #7/, Electronics City, osur Road, Bangalore, (Karnataka), India Phone Fax LITERTURE NO. CEP C B <>-0 Published in Japan October 05

V1000. YASKAWA AC Drive Compact Vector Control Drive NEMA4X/IP66

V1000. YASKAWA AC Drive Compact Vector Control Drive NEMA4X/IP66 YSK YSK C rive Compact Vector Control rive V000 NEM4X/IP66 00 V CLSS, TREE-PSE INPUT: 0. to 8.5 k 00 V CLSS, SINGLE-PSE INPUT: 0. to.0 k 400 V CLSS, TREE-PSE INPUT: 0. to 8.5 k Certified for ISO900 and