Motor Protection Circuit Breaker, versatile efficient technologically advance compact design

Size: px

Start display at page:

Download "Motor Protection Circuit Breaker, versatile efficient technologically advance compact design"

Amy Wells
5 years ago
Views:

1 Motor Protection Circuit Breaker, versatile efficient technologically advance compact design VMMS-32 VMMS-63 VMMS-100

2 MOTOR PROTECTION CIRCUIT BREAKER 1

3 Product Selection Quick selection table... IEC rating VMMS-32S VMMS-32H VMMS-32S VMMS-32H VMMS-32HI Icu Ics Icu Ics Icu Ics Icu Ics Icu Ics Icu Ics Icu Ics Icu Ics Icu Ics Icu Ics

4 Product Selection Quick selection table... IEC rating VMMS-63H VMMS-100H VMMS-63H VMMS-32HI VMMS-100H VMMS-100HI Icu Ics Icu Ics Icu Ics Icu Ics Icu Ics Icu Ics Icu Ics Icu Ics Icu Ics Icu Ics

5 Product Selection Guide Motor Protection VMMS-32S VMMS-32H

6 Product Selection Guide Motor Protection VMMS-63H VMMS-100H 1

7 Product Selection Guide Short Circuit Protection for Motor Controller VMMS-32HI VMMS-63HI VMMS-100HI

8 Product Selection Guide Accessories (Electrical Auxiliaries) Model VMFX... Front mounting 2-pole One front mounting module per circuit breaker VMLX... Side mounting on the left 2-pole One side mounting module per circuit breaker VMLA... Operates in case of trip Side mounting on the left 2-pole Set VMLA first of using VMLX together (VMMS-63 can not accept VMLX and VMLA together) VMAM... Operates in case of instantaneous trip Side mounting on the left 2-pole Set VMAM first in case of using VMLX together 1

Product Selection Guide Accessories (Electrical Auxiliaries) VMRS... VMRU... VMRX... Side mounting on the right One side mounting module per circuit breaker.

9 Product Selection Guide Accessories (Electrical Auxiliaries) VMRS... VMRU... VMRX... Side mounting on the right One side mounting module per circuit breaker. Can not use with VMRU or VMRUX Side mounting on the right One side mounting module per circuit breaker. Can not use with VMRU or VMRUX Side mounting on the right Include 2NO Auxiliary contact One side mounting module per circuit breaker. Can not use with VMRU or VMRUX Can not attach to VMMS-32S VMMS E-Handle is a Rotary-type Handle accessory which can be attached to the front to control and verify the ON, TRIP, OFF condition of Manual Motor Starters under the situation of closing panel. VMMS-32H/HI, VMMS-63S/H/HI, VMMS-100S/H/HI VMMS-32S, 32H, 32HI VMMS-63S, 63H, 63HI VMMS-100S, 100H, 100HI VMMS-32, 63 VMMS-32S, 32H, 32HI VMMS-63S, 63H, 63HI

Product Selection Guide Accessories (Electrical Auxiliaries) Case cover of VMMS enclosure is specifically designed with dust-proof

Therefore, it is the optimum product to use in dusty areas such as cement plants, cotton mills as well as in the presence of

Application Model: VMMS - 32H / HI Operation temperature : -20~ +60 CE and UL certified Degree of protection: Ip65 Material of

It is supplied as standard for all TCMS Application Model: VMMS-32, 63,100 (All types) Insulation barrier is used to enlarge the

10 Product Selection Guide Accessories (Electrical Auxiliaries) Case cover of VMMS enclosure is specifically designed with dust-proof and corrosive-proof structure. Therefore, it is the optimum product to use in dusty areas such as cement plants, cotton mills as well as in the presence of corrosive gas or liquid (excl. explosive, flammable gas) such as fertilizer, refinery, and plating plant. Application Model: VMMS - 32H / HI Operation temperature : -20~ +60 CE and UL certified Degree of protection: Ip65 Material of insulation: Plastic (A VMMS-32H, 32HI Dial cover is used to protect the set value from the operation that is not intended. It is supplied as standard for all TCMS Application Model: VMMS-32, 63,100 (All types) Insulation barrier is used to enlarge the creepage distance and clearance to meet therequirement of UL. Application Model : VMMS-100 VMMS-100S, 100H, 100HI 32AF VMMS is only for DIN rail mountable by itself. Screw mounting holder is used to mount VMS on a panel by screws. Application Model : VMMS-32 VMMS-32S, 32H, 32HI 1

11 Product Selection Guide Accessories (Electrical Auxiliaries) Direct adaptor and Mounting unit Direct adaptor, DA Direct adaptor is used to connect VMMS directly with a contactor Mounting unit, MU This device is attached module to connect joined VMMS with a contactor Application Model: VMMS+contactor VMIM06~16 / VMPIM06~16 Mini contactor VMMS VMMS-32S VMMS-32H, 32HI VMMS-32S VMMS-32H, 32HI Mini MC VMCIM06~16 Mini MC VMDIM06~16 VMMS32S VMMS32H VMMS63S, 63H VMMS100S, 100H VMMS32S VMMS32H VMMS63S, 63H VMMS100S, 100H 35mm DIN rail for VMMS32~63 35mm or 75mm DIN rail for VMMS100 - use 15mm depth for 35mm DIN rail

12 Product Selection Guide Accessories (Electrical Auxiliaries) VMFX... VMLX... VMLA... 1

13 General Data VMRU... VMRUX... VMRS... Installation of auxiliaries Be sure to turn off the main switch of TCMS before any other action. VMFX... VMMS-32S/H/HI To install VMFX remove the cover first. 2 each of VMLX can be installed together. Only one of auxiliaries among VMRU, VMRS and VMRUX can be mounted on the right side of VMMS. Do not give trip signal to VMRS longer than 10 sec. Refer to the possible combination chart for the mounting of VMLX, VMLA and VMLAM on left side of VMMS. Push the trip button before installation of VMLAM Remove the indicated part in the fig. before the additional installation of VMLX VMLX, VMLA, VMLAM VMLAM-... VMLX-... VMLA-... VMRS, VMRU, VMRUX Separation of auxiliaries from VMMS Be sure to turn off the main switch of VMMS before the separation. Push softly the separation button on the side of the auxiliary and VMFX... VMMS-63, 100S/H/HI To install TFX remove the cover first. 2 each of VMLX can be installed together. (only 1 each for VMMS-63) Only one of auxiliaries among VMRU, VMRS and VMRUX can be mounted on the right side of VMMS. Do not give trip signal to VMRS longer than 10 sec. VMLA-... Refer to the possible combination chart for the mounting of VMLX, VMLA and VMLAM on left side of VMMS VMRS-...

14 General Data Remove the indicated part of VMMS-63 and VMMS 100 as shown in the fig. before the installation of TLA Do not install TLA in the status of TRIP of VMMS-100 Remove the indicated part as shown in the above fig. before the additional installation of TLX Separation of auxiliaries from VMMS Be sure to turn off the main switch of VMMS before the separation. Push softly the separation button on the side of the auxiliary and pull it. Installation of auxiliaries How to Install and reset VMRUX Installing 1. Check if the trip button of VMRUX is «UP». If not, push the side lever to come it up. 2. Fit the both lower hooks into the VMMS. 3. Rotate the handle of VMMS to the 20 to 30 degree to ON direction and keep it. 4. Fit the both upper hooks into the VMMS 5.Input power to the VMRUX 6.Turn ON the handle of VMMS VMRUX... Resetting The trip button of VMRUX does not come «UP» in the event of tripping due to undervoltage. To turn ON the VMMS after the tripping Turn OFF the VMMS and check if the trip button of VMRUX comes «UP» Push the trip button Turn ON the VMMS Combination with mini contactors *Only for VMMS-100 *For all VMMS VMMS VMDA-16SA VMMS-32S + VMCI 06~16 VMDA-16SD VMMS-32S + VMCI 06~16 VMDA-16HA VMMS-32H + VMCI 06~16 VMDA-16HD VMMS-32H + VMCI 06~16 VMLX(Max. 2a) Installation of auxiliaries VMLA VMLAM VMLX+VMLA VMLX+VMLAM VMMS32S/H/HI VMMS100S/H/HI *VMRUX: can not attache to VMMS-32S VMRS VMRU VMRUX VMLX VMLA VMLAM VMLX+VMLAM VMMS63S/H/HI VMRS VMRU VMRUX 1

15 General Data VMMS-32H/32HI VMMS-63S/63H/63HI VMMS-100S/100H/100HI

16 General Data Assembling is available for VMMS-63/100 with 4 holes on the main cover which is produced after June, 2007 base on manufacturing date. 1

17 General Data MOTOR PROTECTION CIRCUIT BREAKER

Manual Motor Controller (UL508, CSA, C22.2) VMMS 32S VMMS 32H Rated operational current Ie [A] 0.16 0.25 0.4 0.63 1 1.6 2.5 4 6 8 10 13 17 22 26 32 Max.

18 Manual Motor Controller (UL508, CSA, C22.2) VMMS 32S VMMS 32H Rated operational current Ie [A] Max. short-circuit current 240V [ka] V [ka] V [ka] Motor load 1 Phase 115V [HP] /8 1/4 1/3 1/2 1/ V [HP] /10 1/6 1/3 1/ Phase 200V [HP] /2 3/ V [HP] /2 3/ V [HP] / V [HP] /2 3/ Max. fuse size [A] Max. breaker size [A] VMMS 63H VMMS 100H 1

19 Technical Information VMMS 32S, 32H VMMS 63H VMMS 100H,IS/ / / /,IS ,IS / / / / Available Available Available Available Available Available # # # Terminal capacity Note: # In = Max. rated operational current Ie Accessories VMFX... VMLX... VMLA... / / / / / / / / / / / / / / / / / / Accessories VMRU... VMRUX... VMRS... Terminal capacity for Accessories

20 Technical Information Type * * # # * # * * # # VMMS-32S VMMS-63H VMMS-100H Note : * : Permissible up to 5% over voltage, # : Permissible up to 10% over voltage VMMS-32S VMMS-32H, 32HI VMMS-63H, 63HI VMMS-100H, 100HI 1

21 Type '2' coordination according to IEC VMMS 32S, 32H [kw] [A] Type [A] [A] Type [A] - - VMMS-32S 0.16A 0.1~ VM1M06 / VM1M09 6 / VMMS-32S 0.25A 0.16~ VM1M06 / VM1M09 6 / VMMS-32S 0.4A 0.25~ VM1M06 / VM1M09 6 / VMMS-32S 0.63A 0.4~ VM1M06 / VM1M09 6 / VMMS-32S 0.63A 0.4~ VM1M06 / VM1M09 6 / VMMS-32S 1A 0.63~1 13 VM1M06 / VM1M09 6 / VMMS-32S 1.6A 1~ VM1M06 / VM1M09 6 / VMMS-32S 1.6A 1~ VM1M06 / VM1M09 6 / VMMS-32S 2.5A 1.6~ VM1M VMMS-32S 4A 2.5~4 52 VM1M VMMS-32S 4A 2.5~4 52 VM1M VMMS-32S 6A 4~6 78 VM1M VMMS-32S 8A 5~8 104 VM1M VMMS-32S 10A 6~ VM1M VMMS-32H 13A 9~ VM1M VMMS-32H 17A 11~ VM1M VMMS-32H 22A 14~ VM1D VMMS-32H 26A 18~ VM1D VMMS-32H 32A 22~ VM1D VMMS-63H 40A 28~ VM1D VMS-63H 50A 34~ VM1D VMMS-63H 63A 45~ VM1D VMMS-100S 75A 55~ VM1D VMMS-100S 90A 70~ VM1D VMMS-100S 100A 80~ VM1D95 85

22 Type "2" coordination according to IEC / IS1394 Type * * # # * # * * # # KW A Type A A Type A VMMS-32S 4A 2.5 ~ VM1M16/VM1-D18 16/ VMMS-32S 6A 4 ~ VM1M16/VM1-D18 16/ VMMS-32S 8A 5 ~ VM1M16/VM1-D18 16/ VMMS-32S 10A 6 ~ VM1-D VMMS-32H 13A 9 ~ VM1-D VMMS-32H 17A 11 ~ VM1-D VMMS-32H 22A 14 ~ VM1-D VMMS-32H 26A 18 ~ VM1-D VMMS-32H 22A 22~ VM1-D VMMS-63H 40A 28~ VM1-D VMMS-63H 50A 34~ VM1-D VMMS-63H 50A 34 ~ VM1-D VMMS-63H 63A 45 ~ VM1-D VMMS-100S 90A 70 ~ VM1-D VMMS-100S 100A 80 ~ VM1-D

23 Time/Current characteristic VMMS 32S, 32H VMMS-32AF VMMS-63, 100AF.

24 Dimensions VMMS 32H, 32HI VMMS-32H/HI+PB-32(2,3 Terminal) PB-322(2-Terminal), PB-323(3 Terminal) 1

25 Dimensions VMMS 100S, 100H, 100HI VMMS 32S, 32H

26 Dimensions VMMS-32H/32HI VMMS-63SS/63H/63HI VMMS-100S/100H/100HI VMMS-32H/32HI VMMS-63S/63H/63HI VMMS-100S/100H/100HI 1

Manual Motor Starters. Meta-MEC

Manual Motor Starters. Meta-MEC Manual Motor Starters Meta-MEC Manual Motor Starters LS Meta-MEC Manual Motor Starters provide completed ranges up to 100A 45 mm 55 mm 32AF 2 2 45 mm 70 mm 63AF 100AF 3 3 Manual LS Meta-MEC Motor Starters