Catalog May Cable Accessories kv EPR- and XLPE-insulated cables

Transcription

1 Catalog May 015 Cable Accessories 7. 4 kv EPR- and XLPE-insulated cables

2

3 Table of content Cable Accessories 1 Cable accessories, 7. 4 kv General accessories and tools 3 Universal clamps 4 List of content Alphabetical order 5 List of content by category 6 We reserve the right to make technical changes or modify the content ABB Catalog 015 1

4 Cable Accessories 7. 4 kv 1 Cable Accessories factory and Technical Lead Center situated in Alingsås, Sweden. We work to create safe electrical distribution via power cable networks. To achieve this, we develop, manufacture and market a broad range of cable accessories, for distribution and transmission. Our main customers are utilities, EPC and OEM. Our core competencies are electrical connections in cable systems and manage electric field grading systems. Our own test laboratories are essential for our product developement and quality assurance. Catalog This catalog covers cable accessories in the range from 7. to 4 kv. List of content sorted by name or product category can be found in the end of this catalog. The product catalog can also be downloaded from our website. Other product catalogs available on request: Cable Accessories 1 kv, XLPE cables Cable Accessories 1 5 kv, PILC cables Cable Accessories 5 40 kv, XLPE cables We reserve the right to alter the design and range of our products without prior notice. Our business idea We provide companies that work with electric power with solutions which enable them to joint and connect cables easily and safely, and distribute electricity. Satisfying customer needs, Quality and Environment are our priorities. We work continuously to improve our processes. Important foundations for this work are our quality and environment management systems. ISO 9001 ISO OHSAS ABB AB Cable Accessories Box 531 SE Alingsås Sweden Tel: info.sedon@se.abb.com 1/1 015 ABB cable accessories 7. 4 kv Introduction

5 Our five core competencies 1. Understanding the total cost and value for cable accessories as elements in systems We as supplier of components that are pieces in a puzzle, the cable system and the related interfaces, need to understand the demand and requirements on the single component in order to optimize the value and performance. The value offer for components is in relationship with the system, we also add value in later stages in this value chain. By knowing the actual expectations and trends we are able to meet the demand in the long term. Our expertise and extensive global footprint ensure we understand the product requirements and future trends.. Manufacturing and quality assurance of insulation system based on rubber With modern manufacturing technology and quality management processes we can keep up the productivity and thereby offer competitive products. We have material expertise as well as test facilities for rubber material development and improvements, by both know-how and know-why we are able deliver insulation systems in the complete range of cable accessories. 3. Workmanship in installation of cable accessories Joints and terminations are regarded as critical components in cable systems, and the workmanship during installation is very important when considering the risk of future failures. When preparing cable several layers need to be removed or treated without damaging other layers, this requires skills and knowledge how to handle tools for this application. Knowledge about what are the critical steps in accessories assembling gives the best foundation for successful and safe installation. 4. Electrical, mechanical and thermal design of insulation systems and connectors The design of our accessories are based on expertise within electrical, mechanical and thermal performance. It is essential to understand the connection between them since all the three technologies comes down to one parameter namely coupled electrical, mechanical and thermal properties. We have long extensive experience and use modern FEM software that allows us to calculate coupled electrical and thermal fields as well as thermomechanical conditions. Our electrical designs involves geometrical, resistive and refractive field controlling involving advanced field grading rubber materials. 5. Performance of rubber and metal materials in outdoor conditions Cable accessories are exposed to harsh outdoor climate conditions. Insulators are exposed to UV radiation and pollution, joints are operating underground often in wet conditions, and they shall perform for many years without breakdown. It is essential for us to keep up the expertise within outdoor insulation performance and corrosion protection, with expertise and our test facilities, e.g. Weather-O-Meter test, we can ensure the product deliver what we promise Introduction ABB cable accessories 7. 4 kv 015 1/

6 Requirements and approvals 1 Definition of voltages Cables and cable accessories are classified according to the voltages at which they operate. A rapid survey at standards all over the world shows that the designations are slightly different. However, IEC designations gives a clear picture of used vocabulary. The voltages normally used in this context are: U 0 = the rated r.m.s.(root mean square) power-frequency voltage between each conductor and screen or sheath for which cables and accessories are designed. U = the rated r.m.s power-frequency voltage between two different conductors for which the cables and accessories are designed. EN (European Norm) HD (Harmonization Document) These standards were developed by CENELEC for the European countries. In most cases, these standards harmonize with IEC standards.each European country publishes the standard as its own, and there may be some national deviations and special requirements. Voltage range U m 7.-4 kv IEC: Current standards are IEC 6144, which covers test methods, and IEC , which sets out the testing requirements. U m = the maximum r.m.s power-frequency voltage between two different conductors for which the cables and accessories are designed. It is the highest voltage that can be sustained under normal operating conditions at any time and at any point in a system. It excludes temporary voltage variations due to fault conditions and the sudden disconnection of large loads. Standards Electrical components must meet numerous requirements in areas such as functional safety, technical performance, personal safety and so on. For cable accessories, compliance with the quality requirements is checked by type and routine testing. We perform these tests to various standards, both international and national. The standards on which our tests are usually based: IEC (International Electrotechnical Commission) An international standard used worldwide. IEC contains U m 36 kv. CENELEC: Current standards are EN 6144 which covers test methods and is identical to IEC HD 69.1 S, which sets out the testing requirements. The main difference between IEC and CENELEC is that CENELEC stipulates a longer period of temperature cycling under voltage. HD 69. S1 applies to accessories for paper-insulated cables and transition joints. A test conducted in accordance with CENELEC also satisfies the IEC requirements. To include the less common voltages which occur in certain European countries, CENELEC has included more voltage classes than IEC. In addition, CENELEC runs up to U m 4 kv. CENELEC voltage classes U 0 U U m /3 015 ABB cable accessories 7. 4 kv Introduction

7 Reasons for choosing ABB Cable Accessories A power cable network must be capable of supplying electric power without interruption. If a failure does occur, it is usually the junction points in the network that are at fault, rarely the cable. So it pays to choose cable accessories with care. One reason for our success is that we have constantly developed cable accessories for all types of cables. This has given us both broad and deep experience base. We have also developed our accessories to manage optical fiber in power cables, and integrated screen separation in cable joints. This enables system designers to improve and optimize their systems. Our products are made with modular design, this makes the accessories exeptionally easy to install. The jointers can easily become familiar with the components, and this reduces the risk of mistakes. Another advantage is that our cable terminations can be assembled on the ground with controlled conditions and then lifted into place simple and safe! Unless otherwise specified, the cable accessories are supplied as standard with bolt connections for conductors. Experience Long experience brings great expertise. We have been manufacturing cable accessories for paper-insulated cables for about 100 years. When XLPE-insulated cables were introduced more than 50 years ago, we were involved from the outset. Since then we have been in the forefront of development. We have a long experience in high voltage engineering and have always led the field in research and development. 1 Manufacturing outdoor cable termination for paper-insulated cables in 196. Introduction ABB cable accessories 7. 4 kv 015 1/4

8 Reasons for choosing ABB Cable Accessories 1 Research and Development Our core competence is our expertise in electrical connections in power cable systems. Successful product development requires proper resources. We have an advanced chemistry laboratory, a profound expertise in the field of polymers and well-equipped high voltage and high-current laboratories. Our corporate research Centers enables us to conduct long term developement of new technologies. Better Economy ABB Cable Accessories provide greater safety. This means major savings in the long term, as well as lower costs from simplified routines for purchase, delivery and storage. Also shorter installation time reduces the total cost for the system. Professional Training The technology of cables and their installation is constantly developing. We offer a broad range of courses in cable technology and cable accessories. Our instructors are involved in our development projects, so you can be sure that they have access to the latest technology. We arrange training programmes and practical exercises in the assembly of cable accessories up to 40 kv. All course participants will receive a diploma or a training certificate after successfully passing theoretical and practical tests. We facilitate the training in our factory or we may arrange in suitable location in agreement with you. If you would like to know more about the courses, please contact your ABB representative or our training department directly. 1/5 015 ABB cable accessories 7. 4 kv Introduction

9 Cable Accessories 7. 4 kv ABB cable accessories for 7. 4 kv are characterized by simple solutions with a reliable function. Long experience and continuous product development enable us to offer products that meet future requirements for reliable and dependable systems. At the time when XLPE-insulated cable was introduced in the beginning of the 1960s, we already realized the importance of the cable accessories having a constant, active pressure over the cable, in this way following the physical changes in the cable in service. The solution at the time was to use tapes with different properties. Our patented field-control material and the first premolded products were introduced in the 1970s. The technology has since been a guiding force for our product development. Our current range includes cable joints, cable terminations and screened separable cable connectors in line with this concept. The fact that the products are premolded means that they are manufactured in a single piece including important functions such as electrical field-control, insulation and sealing. The use of flexible materials enables the cable accessory to follow the variations in the cable under load, thus ensuring an active pressure for a reliable power transmission. Manufacturing the products from soft rubber also means that fewer sizes covers different cable dimensions. All of this, in combination with the bolt technology that we use in our cable connectors and cable lugs, gives a reliable and dependable system. More than one million premolded cable joints, cable terminations and cable connectors have already been installed by customers in electricity distribution networks all over the world. Our cable terminations and screened separable cable connectors are also purchased by customers who manufacture switchgears and other installations. In addition to the products presented in this catalogue, we offer especially adapted products and solutions for different markets and cables and a range of cable preparation tools. Please do not hesitate to contact us if you have any other needs or queries. 1 Cable accessories with four important functions: grading of electrical fields, withstanding creepage currents, moisture barriers and mechanical protection. Introduction ABB cable accessories 7. 4 kv 015 1/6

10 /1 015 ABB cable accessories 7. 4 kv Product range

11 Table of content Cable Accessories, 1 4 kv Cable joints Cable joint with cold shrink outer jacket, SOJ CS, SOJ CSS 1 4 kv /4 Cable joint for radially watertightened cable, SOJ CSWS, SOJ RWI, SOJ RWIT 1 4 kv /5 Cable joint with or without outer jacket, SOJ SL, SOJ R 1 4 kv /6 Cable joint with heat-shrink outer jacket, SOJ HSTS 1 36 kv /7 Cable joint, for cables with Cu-tape screen, SOJ EA 1 4 kv /9 Tape cable joint, SMXB 1 36 kv /13 Cable cabinets Cable cabinet, 1 4 kv, 50 A /15 Cable cabinet, 1 36 kv, 630 A /17 Cable connectors and shrouded terminations Screened separable cable connectors, CSE-A 1 4 kv, 50 A /19 Screened separable cable connectors, CSE-A 1 4 kv, 400 A / Screened separable cable connectors, CSE-A 1 4 kv, 630 A /4 Screened separable connectors for cables with Cu-tape screen, CSE-A 1 36 kv, 630 A /5 Parallel connectors, CSEP-A 1 4 kv, 630 A /7 Parallel connectors for cables with Cu-tape screen, CSEP-A 1 4 kv, 630 A /8 Surge arresters for 630 A connectors, CSAP-A, 1 4 kv, 630 A /30 Shrouded termination, TB-A 1 kv, 630 A /31 Shrouded termination, KAP 630, 1 4 kv, 630 A /3 Shrouded termination, KAP 300 U, 1 4 kv, 300 A /34 Cable terminations Dimensional drawings, SOT /35 Premolded cable termination, indoor, SOT 7. kv /36 Premolded cable termination, complete kits, SOT SCL 1 36 kv /37 Premolded cable termination, SOT 1 36 kv /38 Cable termination for cables with Cu-tape screen, SOT 1 36 kv /39 Cable termination, recommended to be used in applications were significant harmonics may occur, indoors, APIT 1 36 kv /4 Cable termination, recommended to be used in applications were significant harmonics may occur, outdoors, APSEA 1 36 kv /43 Cable termination, outdoor, APED 1 36 kv /45 Accessories Screen separation kit for 3-core cables, PSSK, PSSK L, PSSK E /47 Branch seal kit for 3-core cable terminations, TSH, SSH /48 Earthing kit for cable terminations, JSA 4 6, JXT 1 3 /49 Screen connection for cable joints, JSA /50 Armouring kit for cable joints, ARM /51 Cable connection, cverhead line clamps, FK, FKFB /5 Cable connection, cable lugs, SCL-B /53 Cable connection, cable connectors, SC-B /53 Cable connection, cable connectors, SH-SKRM /53 Accessories, bird protection, HU, HUF, HUS /54 Product range ABB cable accessories 7. 4 kv 015 /

12 /3 015 ABB cable accessories 7. 4 kv Product range

13 Premolded cable joint with cold shrink outer jacket SOJ 1 4 kv Use Premolded cable joint for XLPE- and EPR-insulated 1- or 3-core cables with Al or Cu conductor, 1 4 kv. Standards CENELEC, HD 69.1 S1 SS Edition 1 VDE 078 KEMA S8 IEEE Design The joint body is made of rubber in three layers: a conductive outer layer, an insulating layer and a conductive inner layer. The kit contains all mounting material. The joint body is pre-expanded on plastic inserts before installation. When the cables have been connected and the joint is centred, the inserts are pulled out. This way the joint body will provide an active pressure on the cable insulation and will follow variations in the cable during load. SOJ CSS The kits are selected as follows: SOJ CSS Contains cold-shrink outer jacket and connectors with shear-off bolts for conductor and screen. SOJ CS Contains cold-shrink outer jacket. Connectors are not included. Note: For mm² cables ADAPTER must be ordered separately, see following pages. WIM 3 to be used as complement when jointing 3-core watertightened cable, see following pages. Always select products by Insulation diameter. Insulation diameter Cable cross section Designation CSS CS Designation CSS CS 1 kv 4 kv 1-core Weight Weight 3-core Weight Weight mm mm² kg/kit kg/kit kg/kit kg/kit SOJ SOJ SOJ SOJ SOJ SOJ SOJ SOJ SOJ SOJ SOJ SOJ SOJ SOJ SOJ SOJ Accessories, to be ordered separately D ADAPTER TS WIM SH-SKRM Accessories Use SOJ CSS SOJ CS See page ADAPTER Cables with different dimensions X X /10 TS Additional kit for sector shaped 3-core cables X X /10 WIM 3 Diffusion seal X X /11 SH-SKRM Bolt connector X /53 JSA Cables with Cu-tape screen X X /50 JSA Cables with Al-foil screen X X /50 Product range ABB cable accessories 7. 4 kv 015 /4

14 Premolded cable joint for radially watertightened cable SOJ 1 4 kv Use Premolded cable joint for XLPE- and EPR-insulated 1- or 3-core cables with Al- or Cu-conductor and radially watertightened aluminium foil for 1 4 kv. SOJ CSWS Standards Meets the requirements of: CENELEC, HD 69.1 S1 SS edition 1 VDE 078 KEMA S8 IEEE Design The joint body is made of rubber in three layers: a conductive outer layer, an insulating layer and a conductive inner layer. The kit contains all mounting material. The joint body is pre-expanded on plastic inserts before installation. When the cables have been connected and the joint is centred, the inserts are pulled out. This way the joint body will provide an active pressure on the cable insulation and will follow variations in the cable during load. The kits are selected as follows: SOJ CSWS Used for jointing watertightened 1-core cables with Cu-wire screen. Contains cold-shrink outer jacket, Al-foil tube and connectors for conductor and screen. SOJ RWI SOJ RWIT SOJ RWI Used for jointing three 1-core cables, Prysmian type WISKI TM or similar. Contains copper braids to connect screens, Al foil tubes for radially watertightness and also outer jacket RULLE. Connectors and items for jointing of separate earth wire are not included. SOJ RWIT Used for jointing three 1-core cables Prysmian type WISKI TM or similar, to a standard 3-core cable. Contains copper braids to connect screens, STOP longitudinal watertightness and outer jacket RULLE. Connectors and articles for jointing a separate earth wire are not included. Note: For mm² cables, ADAPTER must be ordered separately, see the table below. Always select products by Insulation diameter. Insulation Cable cross section Designation CSWS Designation RWI RWIT diameter 1 kv 4 kv 1-core Weight 3 x 1-core Weight Weight mm mm² kg/kit kg/kit kg/kit SOJ SOJ SOJ SOJ SOJ SOJ SOJ SOJ SOJ SOJ SOJ SOJ SOJ SOJ SOJ SOJ Accessories, to be ordered separately D ADAPTER TS SH-SKRM Accessories Use SOJ CSWS SOJ RWI SOJ RWIT See page Adapter Adapter kit for cables with different dimensions X X X /10 TS Additional kit for sector shaped cables X X /10 SH-SKRM Bolt connector X X /53 /5 015 ABB cable accessories 7. 4 kv Product range

15 Premolded cable joint with or without outer jacket, RULLE SOJ 1 4 kv Use Premolded cable joint for XLPE- and EPR-insulated 1- or 3-core cables with Al or Cu conductor for 1 4 kv. Standards Meets the requirements of: CENELEC, HD 69.1 S1 SS edition1 VDE 078 KEMA S8 IEEE Design The joint body is made of rubber in three layers: a conductive outer layer, an insulating layer and a conductive inner layer. The joint body is pre-expanded on plastic inserts before installation. When the cables have been connected and the joint is centred, the inserts are pulled out. This way the joint body will provide an active pressure on the cable insulation and will follow variations in the cable during load. SOJ R The kits are selected as follows: SOJ R Contains outer jacket RULLE; a two-layer tape of EPDMrubber and mastic, which is wrapped around the joint. Connectors are not included. SOJ SL Supplied without outer jacket. An outer jacket approved by ABB must be added, for example type ARM. Connectors are not included. Note: For mm² cables ADAPTER must be ordered separately, see the table below. WIM 3 / WIM 4 used as complement when jointing 3-core watertightened cable, see the table below. Always select products by Insulation diameter. Insulation Cable cross section Designation R Designation SL Designation R Designation SL diameter 1 kv 4 kv 1-core Weight 1-core Weight 3-core Weight 3-core Weight mm mm² kg/kit kg/kit kg/kit kg/kit SOJ 11-1 R.6 SOJ 11-1 SL 1.0 SOJ 11 3 R 4.7 SOJ 11 3 SL SOJ 1-1 R 3.0 SOJ 1-1 SL 1.1 SOJ 1-3 R 5.6 SOJ 1-3 SL SOJ 13-1 R 3.1 SOJ 13-1 SL 1. SOJ 13-3 R 6.4 SOJ 13-3 SL SOJ 14-1 R 4.3 SOJ 14-1 SL 1.6 SOJ 14-3 R 8.9 SOJ 14-3 SL SOJ 15-1 R 5.9 SOJ 15-1 SL SOJ 41-1 R 3. SOJ 41-1 SL 1.3 SOJ 41 3 R 6. SOJ 41 3 SL SOJ 4-1 R 3.9 SOJ 4-1 SL 1.5 SOJ 4-3 R 7.0 SOJ 4-3 SL SOJ 43-1 R 4.5 SOJ 43-1 SL 1.8 SOJ 43-3 R 9.1 SOJ 43-3 SL SOJ 44-1 R 6.4 SOJ 44-1 SL. Accessories, to be ordered separately D ADAPTER TS WIM STOP SH-SKRM Accessories Use SOJ R SOJ SL See page Adapter Cables with different dimensions X X /10 JSA Cables with Cu-tape screen X X /50 JSA Cables with Al-foil screen X X /50 TS Additional kit for sector shaped 3-core cables X X /10 WIM Diffusion seal X X /11 ARM Armouring kit X /51 STOP Crutch seal when 3 x 1-core cables are jointed to a 3-core X /10 SH-SKRM Bolt connector X X /53 Product range ABB cable accessories 7. 4 kv 015 /6

16 Premolded cable joint with heat-shrink outer jacket SOJ HSTS 1 4 kv Use Premolded cable joint with heat-shrink outer jacket and bolt connector. For jointing 1 4 kv XLPE- and EPR-insulated 1- or 3-core cables with Al- or Cu-conductors. Standard Meets the requirements of: SS edition 1 VDE 078 CENELEC, HD 69.1 S1 KEMA S8 IEEE Design The joint body is made of rubber in three layers: a conductive inner layer, an insulating layer and a conductive outer layer. The joint kit is complete and restores all the parts of the cable. The joint body is pre-expanded on plastic inserts before installation. When the cables have been connected and the joint is centred, the inserts are pulled out. This way the joint body will provide an active pressure on the cable insulation and will follow variations in the cable during load. SOJ HSTS 3-core kit The kits include: Heat-shrink outer jacket, vulcanizing tape and connectors with shear-off bolts for conductor and screen. Note: Branch seal kit CSK, CSK 3 for transition between 3- or 1-core cables. Kits include a branch seal in heatshrink material, tapes and an installation instructure. CSK is to be ordered separately according to the table. For mm² cables ADAPTER must be ordered separately, see the table below. WIM 3 used as complement when jointing watertightened cable, see the table below. Always select products by Insulation diameter. Voltage Insulation diameter Conductor cross section Designation Weight kv mm mm² kg/kit Cable joint for 1-core SOJ HSTS SOJ HSTS SOJ HSTS SOJ HSTS SOJ HSTS 5.5 Cable joint for 3-core SOJ HSTS SOJ HSTS SOJ HSTS SOJ HSTS 9.1 Cable joint for 1-core SOJ HSTS SOJ HSTS SOJ HSTS SOJ HSTS SOJ HSTS SOJ HSTS 5.5 Cable joint for 3-core SOJ HSTS SOJ HSTS SOJ HSTS 8.8 Accessories, to be ordered separately CSK ADAPTER WIM Accessories Use See page CSK Branch seal for transition between /11 3- and 1-cor cables Adapter Cables with different dimensions /10 WIM 3 Diffusion seal /11 JSA Cables with Cu-tape screen /50 JSA Cables with Al-foil screen /50 /7 015 ABB cable accessories 7. 4 kv Product range

17 Premolded cable joint with heat-shrink outer jacket SOJ HSTS 36 kv Use Premolded cable joint with heat-shrink outer jacket and bolt connector. For jointing 36 kv XLPE- and EPRinsulated 1- or 3-core cables with Al or Cu conductors. Design The joint body is made of rubber in three layers: a conductive inner layer, an insulating layer and a conductive outer layer. The joint kit is complete and restores all the parts of the cable. SOJ HSTS 3-core kit The joint body is pre-expanded on plastic inserts before installation. When the cables have been connected and the joint is centred, the inserts are pulled out. This way the joint body will provide an active pressure on the cable insulation and will follow variations in the cable during load. The kits are included: Heat-shrink outer jacket, vulcanizing tape and connectors with shear-off bolts for conductor and screen. Note: Branch seal kit CSK, CSK 3 for transition between 3- or 1-core cables. Kits include a branch seal in heat-shrink material, tapes and an installation instructure. CSK is to be ordered separately according to the table. For mm² cables ADAPTER must be ordered separately, see the table below. WIM 3 used as complement when jointing watertightened cable, see the table below. Always select products by Insulation diameter. Voltage Insulation diameter Conductor cross section Designation Weight kv mm mm² kg/kit Cable joint for 1-core SOJ HSTS SOJ HSTS SOJ HSTS SOJ HSTS SOJ HSTS SOJ HSTS SOJ HSTS SOJ HSTS* 5.5 Cable joint for 3-core SOJ HSTS SOJ HSTS SOJ HSTS SOJ HSTS SOJ HSTS SOJ HSTS SOJ HSTS SOJ HSTS* 10.9 Fits to 630 mm² if insulation diameter is Accessories, to be ordered separately CSK ADAPTER WIM Accessories Use See page CSK Branch seal for transition between /11 3- and 1-cor cables Adapter Cables with different dimensions /10 WIM 3 Diffusion seal /11 JSA Cables with Cu-tape screen /50 JSA Cables with Al-foil screen /50 Product range ABB cable accessories 7. 4 kv 015 /8

18 Premolded cable joint, for cables with Cu-tape screen SOJ EA 1 4 kv Use Premolded cable joint for XLPE- and EPR-insulated 1- or 3-core cable with Al or Cu conductors and Cu-tape screen for 1 4 kv. Standards Meets the requirements of: SS edition 1 VDE 078 CENELEC, HD 69.1 S1 KEMA S8 IEEE Design The joint body is made of rubber in three layers: a conductive inner layer, an insulating layer and a conductive outer layer. The kits are selected as follows: SOJ EA Contains copper stockings and constant force springs to restore the Cu-tape screen and cast resin armouring kit to restore the outer jacket. Note: Connectors for the cable conductors must be ordered separately. The joint body is pre-expanded on plastic inserts before installation. When the cables have been connected and the joint is centred, the inserts are pulled out. This way the joint body will provide an active pressure on the cable insulation and will follow variations in the cable during load. Always select products by Insulation diameter. Insulation Cable cross section Designation diameter 1 kv 4 kv mm mm² SOJ 11 3 EA SOJ 1-3 EA SOJ 13-3 EA SOJ 14-3 EA SOJ 41 3 EA SOJ 4-3 EA SOJ 43-3 EA Accessories, to be ordered separately D ADAPTER TS WIM SH-SKRM Accessories Use See page Adapter Cables with different dimensions /10 TS Additional kit for sector shaped 3-core cables /10 WIM Diffusion seal /11 ARM Armouring kit /51 SH-SKRM Bolt connector /53 /9 015 ABB cable accessories 7. 4 kv Product range

19 Accessories, to be ordered separately Premolded cable joint, SOJ 1 4 kv Additional kit TS Additional kit for sector shaped 3-core cables, for use when the D-dimension over the insulation is above the value as below. D Designation Fitting joint D Weight mm kg/item TS 11 SOJ TS 4 SOJ TS 43 SOJ Adapter kit, ADAPTER Adapter for cables from 10 mm² and for jointing cables with a smaller cross section. Manufactured and tested to take one step down to the nearest joint size (each kit contains one adapter). Designation Fitting joint Minimum conductor Insulation diameter Weight cross section mm² mm kg/item ADAPTER 1* SOJ 11,41, Minimum * Minimum diameter over connector is 1 mm. Crutch seal, STOP For sealing when three 1-core cables are jointed to a 3-core cable. Used only for SOJ R (see page /6). Designation Voltage Suitable for 1-core cables Weight with conductor cross section kv mm² kg/item STOP STOP 1 > > Product range ABB cable accessories 7. 4 kv 015 /10

20 Accessories, to be ordered separately Premolded cable joint, SOJ 1 36 kv Diffusion seal, WIM Used as complement to SOJ CS, SOJ CSS or SOJ R when jointing 1- or 3-core watertightened cables with diffussion barrier of aluminium. WIM 3 Designation Fitting joint Type of cable Weight WIM 3 SOJ 11 3, 1-3, 13-3 SOJ 41 3, 4-3, 43-3 SOJ 361-3, 36-3, core with Al foil in direct contact with screen kg/kit 0.3 WIM 5 SOJ 11-1, SOJ core with Al-foil in direct contact with screen WIM 6 SOJ 13-1, SOJ 14-1, SOJ 15-1 SOJ 41-1, SOJ 4-1, SOJ 43-1 SOJ 44-1, SOJ 45-1, SOJ SOJ 36-1, SOJ 363-1, SOJ 364-1, SOJ core with Al-foil in direct contact with screen Accessories, to be ordered separately CSK Branch seal kit for, SOJ HSTS when transition between 3- and 1-core cables. Accessories Conductor cross section 1 kv 4 kv 36 kv mm² CSK CSK D ADAPTER TS WIM STOP SH-SKRM Accessories Description CSS CS R SL RWI RWIT HSTS See page ADAPTER Cables with different dimensions X X X X X X X /10 TS Additional kit for sector shaped 3-core cables X X X X X X /10 WIM Diffusion seal X X X X /11 STOP Crutch seal when 3 x 1-core cables are jointed to a 3-core X /10 CSK Branch seal for transition between 3- and 1-core cables X /11 SH-SKRM Bolt connector X X X X X X /53 JSA Earthing kit for cable with Cu-tape screen X X X X /50 JSA Earthing kit for cable with Al-foil screen only X X X X /50 ARM Armoured cable or when extra mechanical protection is required X /51 / ABB cable accessories 7. 4 kv Product range

21 Dimensional drawings Premolded cable joint, SOJ 1 36 kv B C B C A A SOJ with cold-shrink outer jacket. SOJ with cold-shrink outer jacket for watertightened 1-core cables. B B C A A SOJ with RULLE outer jacket on 3 x 1-core WISKI TM cables. SOJ with RULLE outer jacket on 3 x 1-core WISKI TM cables to a 3-core XLPE-insulated cable. Designation Dimensions A* B* C* mm 1-core SOJ SOJ SOJ SOJ SOJ SOJ SOJ SOJ SOJ SOJ SOJ SOJ SOJ SOJ core SOJ SOJ SOJ SOJ SOJ SOJ SOJ SOJ SOJ SOJ SOJ SOJ *Estimated dimensions depending on installation and type of outer jacket. B A SOJ with heat-shrink outer jacket. B A SOJ with cast resin as armouring outer jacket. B A SOJ with RULLE outer jacket. C C C Product range ABB cable accessories 7. 4 kv 015 /1

22 Tape cable joint SMXB 1 36 kv Use For jointing XLPE- and EPR-insulated 1- and 3-core cables with Al or Cu conductor 1 36 kv. Standard Meets the requirements of: SEN SS Edition 4 VDE 078 Design The joint kit consists of tapes, stress grading pads FSD and a copper net. Note: Connectors for conductor and screen and welding equipment must be ordered separately. Designation Weight Designation Weight kg/item kg/item 1 x 3-core or 3 x 1-core cables 1 x 1-core cable SMXB SMXB SMXB SMXB SMXB SMXB SMXB SMXB SMXB SMXB SMXB SMXB 6-1. SMXB SMXB SMXB SMXB SMXB SMXB SMXB For selecting size see next page. SMXB SMXB SMXB To be ordered separately STOP WIM SC-B Accessories Description See page STOP Crutch seal when 3 x 1-core cables are jointed to a 3-core /10 WIM Diffusion seal /11 SC-B Bolt connector /53 JSA Earthing kit for cable with Al-foil screen only /50 / ABB cable accessories 7. 4 kv Product range

23 Tables for selection of tape cable joint SMXB 1 36 kv For compression of aluminium conductors Voltage Insulation thickness Cross section mm² kv mm One 3-core or three 1-core cables Cable joint SMXB No * 1* * 13* One 1-core cable Cable joint SMXB No * For 3-core cables choose 3 kits. For compression of Cu-conductors Voltage Insulation thickness Cross section mm² kv mm One 3-core or three 1-core cables Cable joint SMXB No * One 1-core cable * For 3-core cables choose 3 kits. For termite welding of aluminium or Cu-conductors Voltage Insulation thickness Cross section mm² kv mm One 3-core or three 1-core cables Cable joint SMXB No One 1-core cable Cable joint SMXB No Always select products by Insulation diameter. Accessories, to be ordered separately STOP Crutch seal for sealing when 3 x 1-core cables are jointed to a 3-core cable. Designation Voltage Suitable for 1-core cables with conductor cross section Weight kv mm² kg/item STOP STOP 1 > > >10 0. WIM Diffusion seal kits for restoring radial watertightness on cables with diffusion barrier of aluminium. Designation Fitting joint Type of cable Weight kg/kit WIM 1 SMXB 1-1, -1, 3-1, core with Al-foil 0.5 WIM SMXB 5-1, 6-1, 7-1, 8-1,9-1,10-1,11-1,1-1 1-core with Al-foil 0.5 WIM 3 SMXB 1 3, -3, 3-3, 4-3, 5-3, core with Al-foil in direct contact with screen 0.3 Product range ABB cable accessories 7. 4 kv 015 /14

24 Cable cabinet, 50 A HDC-A 1 4 kv Use For jointing or branching XLPE- and EPR-insulated 1-core or 3-core, 1 4 kv cables with conductor cross sections 5 95 mm², 50 A. When branching in a cable grid, a branching point may be necessary to enable selected cable runs to be sectionalized during maintenance. With HDC-A, a solution is provided that makes this possible. Up to three cables can be connected in parallel. Standards Enclosure meets the requirements of mechanical impact tests according to: IEC Cable connectors meet the requirements of electrical tests according to CENELEC, HD 69.1 S Design The enclosure is made of hot-dip-galvanized sheet steel plates with a foundation base plate and additional corrosion protection on parts that will be buried under ground. 31 mm 996 mm The screened separable cable connectors are connected with coupling pieces pre-mounted in the cabinet. The cable cabinet is supplied with: 9 screened separable connectors Standard locks and padlock shackle Note: For 3-core cables, branch seal kit type TSH or screen separation kit type PSSK must be used. To be ordered separately. For foundation kit for floor installation, contact us. Overall height 193 mm Height above ground level,993 mm Always select products by Insulation diameter. Voltage Insulation diameter Conductor cross section Designation Weight kv mm mm² Basic configuration kg /unit * HDC-A * HDC-A * For cables smaller than 5 mm², contact us. / ABB cable accessories 7. 4 kv Product range

25 Accessories, to be ordered separately Cable cabinet, HDC 1 4 kv, 50 A IP 50 Screened insulating plug for installation in the connector so that the cable can be energized even when the cable connector is disconnected. IH-A 450 Insulating hood made of flexible rubber with outer conductive layer and an already installed insulating rod. To be mounted on the bushing in HDC-A 50 for insulation when a cable is temporary disconnected and remaining cables are under voltage. MA 50 Measurement adapter used for mega ohm Ω measurements and to perform different measurements up to 5 kv DC, for example determination of phases. KA 50 Transversal anchor bar. Ø 13 PSSK L: Heat-shrink screen separation kit for cables with Al/Cu-wire screen. TSH Branch seal kit 35 UKRA 90 Universal clamp. Designation Description Qty Weight See page kit kg/unit IP 50 Screened insulating plug /16 IH-A 450 Insulating hood 3.3 /16 MA 50 Measurement adapter /16 KA 50 Busbar /16 PSSL 1 L Screen separation kit, heat-shrink, reinforced and extended, /47 for 3-core cable mm² / 1 kv, mm²/4 kv PSSL L Screen separation kit, heat-shrink, reinforced and extended, /47 for 3-core cable, mm² / 1 kv, mm² / 4 kv TSH Branch seal /48 UKRA 90 Clamp for fixing cables /3 Product range ABB cable accessories 7. 4 kv 015 /16

26 Cable cabinet, 630 A HDC-A 1 36 kv Use For jointing or branching of XLPE- and EPR-insulated, 1 36 kv 1-core or 3-core cables with conductor cross sections mm², 630 A. Up to four cables can be connected in parallel. When branching in a cable grid, a branching point may be necessary to enable selected cable runs to be sectionalized during maintenance. With HDC-A a solution is provided that makes this possible. Standard The cable cabinet meets the requirements for mechanical impact testing according to IEC The cable connectors meet the electrical requirements according to CENELEC, HD 69.1 S. Design The enclosure is made of hot-dip-galvanized sheet steel plates with a foundation base plate and additional corrosion protection on parts that will be buried under ground. The screened separable cable connectors are connected with coupling pieces pre-mounted in the cabinet. The cable cabinet is supplied with: 6 screened separable cable connectors Locks and padlock shackle Overall height 193 mm Height above ground level,993 mm 5 mm 996 mm Required when connecting more cables: 6 screened separable cable connectors type CSE-A. Parallel coupling piece type PC. Note: For 3-core cables, branch seal kit type TSH or screen separation kit type PSSK must be used. To be ordered separately. For foundation kit for floor installation, contact us. The third cable connector is to be ordered separately. Always select products by Insulation diameter. Voltage Insulation diameter Conductor cross section Designation Weight kv mm mm² Basic configuration kg /unit HDC-A HDC-A HDC-A HDC-A HDC-A HDC-A HDC-A HDC-A HDC-A / ABB cable accessories 7. 4 kv Product range

27 Accessories, to be ordered separately Cable cabinet, HDC-A 1 36 kv, 630 A PG 630 Bushing for voltage testing of the cable. Adapted to cable connectors 1 4 kv. CSE-A Screened separable connector 630 A for connection of an external cable. IH-A 4630, IH-A 4630 Insulating sealing hood of flexible rubber with outer conductive layer and an already installed insulating hood. To be installed in HDC-A 630 instead of cable connector in order to temporarily insulate 630 A switchgear or transformer bushings. PG-A 630 Bushing for voltage testing of the cable. Adapted to cable connectors 36 kv. PSSK L Screen separation kit for 3-core cables with Al/Cu-wire screen including heat-shrink branch seal and meters long protective hoses. PC Parallel coupling piece. Replaces the plug in CSE-A when making a parallel connection to another CSE-A 1 4 kv. IP 630 Screened insulating plug for installation in the screened separable connector so that the cable can be energized even when the connector is disconnected from the switchgear or transformer. MA-A 630 Measurement adapter used for mega ohm Ω measurements and to perform different measurements up to 5 kv DC, for determination of phases. Ø 13 TSH Branch seal kit. 35 PC L Parallel coupling piece. Replaces the plug in CSE-A when making a parallel connection to another CSE-A 36 kv. PC 630/50 Connector for connecting a CSE-A 50, in parallel with a previously mounted CSE-A pieces in the kit, tool is included. UKRA 90 Universal clamp. Designation Description Qty. Weight See page per kit kg/kit CSE-A Screened separable connector. 3 Olika /4 /6 IH-A 4630 Insulating sealing hood, 1 4 kv 3 5. /18 IH-A 4630 Insulating sealing hood, 36 kv 3 5. /18 PC Parallel coupling piece, 630, 1 4 kv /18 PC L Parallel coupling piece, 630, 36 kv /18 PG 630 Bushing for voltage testing of the cable, 1 4 kv /18 PG-A 630 Bushing for voltage testing of the cable, 36 kv 1.0 /18 IP 630 Insulating plug, 630 A /18 MA-A 630 Measurement adapter, 630 A /18 PC 630/50 Parallel coupling piece between CSE-A 630 and CSE-A /18 PSSK L Screen separation for 3-core cable mm² 1.5 / 3.9 /.5 /47 PSSK 3 L Screen separation for 3-core cable mm² / 4.8 / 3.4 /47 TSH Branch seal /48 UKRA 90 Clamp for fixing cables /3 Product range ABB cable accessories 7. 4 kv 015 /18

28 Premolded screened separable cable connectors CSE-A 1 4 kv, 50 A CSS-A 1 4 kv, 50 A Application areas Premolded screened separable connectors for XLPEand EPR-insulated 1- or 3-core cables with Al- or Cuconductors for 1 4 kv. Can be installed both indoors and outdoors. Fits standard bushings of outer cone type according to EN Connector with rated current: 50 A: Interface A with plug-in Ø 7.9 mm. Standard Meets the requirements of: CENELEC, HD 69.1 S CSE-A 150 CSE-A 450 CSS-A 150 CSS-A 450 Dimensions in mm. Design CSE-A and CSS-A are manufactured in rubber with three layers; a conductive inner layer, an insulation layer and a conductive outer layer, that are vulcanized together for the best possible interface between the layers. Ø 63 C-C 70 min Ø The cable connectors include both a capacitive test point with protection and an integrated earthing wire. 11 Delivered in 3-phase kits, complete with cable lugs, bolt connection and stress grading adapter, designed to ensure a reliable installation. CSE-A 50 A, 1 4 kv C-C 80 min 66 Note: For 3-core cable with common copper screen wires, a screen separation kit or a branch seal kit must be used. To be ordered separately. Ø Always select products by cable insulation diameter. Voltage Insulation diameter Conductor cross section Designation Weight kv mm mm² kg/unit Elbow cable connector CSE-A CSE-A CSE-A CSE-A Straight cable connector CSS-A CSS-A CSS-A CSS-A Elbow cable connector complete with screen separation kit CSE-A P CSE-A P CSE-A P , CSE-A P 6.1 CSS-A 50 A, 1 4 kv Ø 90 Ø C x45 R Bail holder R3 Ø 31 Ø 3.5 Ø 4 Standard bushing EN Interface A, 50 A Contact type: Plug-in approx. Ø 7.9 mm / ABB cable accessories 7. 4 kv Product range

29 Premolded screened separable connector for cables with Cu-tape screen CSE-A 1 4 kv, 50 A Application areas Premolded screened separable connectors for XLPE- and EPR-insulated 1- or 3-core 1 4 kv cables with Al- or Cu-conductors with copper tape screens, with or without aluminium or steel wire armouring. Can be installed both indoors and outdoors. Fits standard bushings of outer cone type according to EN Connector with rated current: 50 A: Interface A with plug-in Ø 7.9 mm. Standard Meets the requirements of: CENELEC, HD 69.1 S CSE-A 150 CSE-A 450 Dimensions in mm. Design CSE-A is manufactured in rubber with three layers; a conductive inner layer, an insulation layer and a conductive outer layer, that are vulcanized together for the best possible interface between the layers. The cable connectors include both a capacitive test point with protection and an integrated earthing wire. Ø 63 C-C 70 min Ø Delivered in 3-phase kits, complete with cable lugs, bolt connection, earthing kit and stress grading adapters. The adapters are designed to ensure a reliable installation. CSE-A 50 A, 1 4 kv For 3-core cables, a branch seal kit is included. Always select products by cable insulation diameter. Voltage Insulation diameter Conductor cross section Designation Outer sheath diameter Weight kv mm mm² mm kg/unit Elbow cable connector, 3 x 1-core CSE-A R CSE-A S.7 Elbow cable connector, 3-core CSE-A RA CSE-A RB CSE-A SB Ø 90 Ø C x45 R Bail holder R3 Ø 31 Ø 3.5 Ø 4 Standard bushing EN Interface A, 50 A Contact type: Plug-in approx. Ø 7,9 mm Product range ABB cable accessories 7. 4 kv 015 /0

30 Accessories, to be ordered separately CSE-A and CSS-A 1 4 kv, 50 A IH-A 450 Insulating hood of flexible rubber with outer conductive layer and a preinstalled insulating rod. To be mounted on the bushing in a switchgear or a transformer 50 A to insulate it when a cable is temporarily disconnected but other cables are energized. PSSK Screen separation kit to achieve a metallic screen on each core for 3-core cables. JP 50 Earth circuit connector for short-circuit protective earthing. For mounting on the disconnected connector CSE-A for 50 A. IP 50 Screened insulating plug for installation in the connector so that the cable can be energized even when disconnected from the switchgear or transformer 50 A. TSH Branch seal kit to achieve a sealing on each core for 3-core cables. CU 50 Coupling piece to connect two connectors. PC 630/50 Parallel coupling piece. Replaces the plug in CSE-A 630 A when making a parallel connection to CSE-A 50 A. Delivered in 3-phase kits and hex bit socket. MA 50 Measurement adapter used for mega ohm Ω measurements and to perform different measurements up to 5 kv DC, for example determination of phases, 50 A. Designation Description Qty. Weight See page per kit kg/kit IH-A 450 Insulating hood, 1 4 kv, 50 A 3.3 /1 IP 50 Screened insulating plug, 50 A 1 0,8 /1 PSSK Screen separation kit, heat-shrink for 3-core cable /47 TSH Branch seal kit /48 PC 630/50 Parallel coupling piece /1 JP 50 Earthing device, 50 A 1.7 /1 CU 50 Coupling piece between two cable connectors, 50 A 1 0. /1 MA 50 Measurement adapter, 50 A /1 /1 015 ABB cable accessories 7. 4 kv Product range

31 Premolded screened separable cable connector CSE-A 1 4 kv, 400 A Application areas Premolded screened separable connector for XLPEand EPR-insulated 1- or 3-core cables with Al- or Cuconductors for 1 4 kv. Can be installed both indoors and outdoors. Fits standard bushings of outer cone type according to EN Connector with rated current: 400 A: series 400 interface type B with plug-in Ø 14 mm. Standard Meets the requirements of: CENELEC, HD 69.1 S Design CSE-A is manufactured in rubber with three layers; a conductive inner layer, an insulation layer and a conductive outer layer, that are vulcanized together for the best possible interface between the layers. CSE-A 1400 Ø 80 CSE-A 4400 C-C 85 min 173 Ø 7 Dimensions in mm. 34 The cable connector includes both a capacitive test point with protection and an integrated earthing wire. 56 Delivered in 3-phase kits complete with cable lugs, bolt connection and stress grading adapter, designed to ensure a reliable installation. CSE-A 400 A, 1 4 kv Note: For 3-core cables with common Cu-screen wires, a screen separation kit or a branch seal kit must be used. To be ordered separately. Ø 80 C-C 85 min Ø Always select products by cable insulation diameter. CSE-A 400 A, 36 4 kv Voltage Insulation diameter Conductor cross section Designation Rated current Weight kv mm mm² A kg/unit CSE-A CSE-A CSE-A CSE-A CSE-A CSE-A CSE-A CSE-A Ø 10 Ø 70 R3 R Bail holder 40 R3 Standard bushing EN Interface B, 400 A Contact type: Plug-in Ø14 Ø 46 Ø 56 Product range ABB cable accessories 7. 4 kv 015 /

32 Accessories, to be ordered separately CSE-A 1 4 kv, 400 A IH-A 4400, 4400 Insulating hood, of flexible rubber with outer conductive layer and a preinstalled insulating rod. To be mounted on the bushing in a switchgear or a transformer 400 A to insulate it when a cable is temporarily disconnected but other cables are energized. PSSK Screen separation kit to achieve a metallic screen on each core for 3-core cable. IP 400 Screened insulating plug for installation in the connector so that the cable can be energized even when disconnected from the switchgear or transformer 400 A. TSH Branch seal kit to achieve a sealing on each core for 3-core cable. Designation Description Qty. Weight See page per kit kg/kit IH-A 4400 Insulating hood, 1 4 kv, 400 A 3 5. /3 IH-A 4400 Insulating hood, 36-4 kv, 400 A /3 IP 400 Screened insulating plug, 400 A 1. /3 PSSK Screen separation kit, heat-shrink for 3-core cable /47 TSH Branch seal /48 /3 015 ABB cable accessories 7. 4 kv Product range

33 Premolded screened separable cable connector CSE-A 1 4 kv, 630 A Application areas Premolded screened separable connector for XLPEand EPR-insulated 1- or 3-core cables with Al- or Cu-conductors for 1 4 kv. Can be installed both indoors and outdoors. Fits standard bushings of outer cone type according to EN Connector with rated current: 630 A: Interface C1 with bolt M A: Interface C with bolt M16. Standard Meets the requirements of: CENELEC, HD 69.1 S CSE-A 1630, CSE-A 4630 Dimensions in mm. CSE-A 36630, CSE-A 4630 C-C Ø min 17 9 Design CSE-A is manufactured in rubber with three layers; a conductive inner layer, an insulation layer and a conductive outer layer, that are vulcanized together for the best possible interface between the layers. Ø 7 56 The cable connector includes both a capacitive test point with protection and an integrated earthing wire. Delivered in 3-phase kits, complete with cable lugs, bolt connection and stress grading adapter, designed to ensure a reliable installation. Note: For 3-core cables with common Cu-screen wires, a screen separation kit or a branch seal kit must be used. To be ordered separately. Ø 70 R3 9 R R3 Ø 46 Ø 56 Standard bushing EN Interface: C1, 630 A Interface: C, 150 A Contact type: Bolt M16 CSE-A 630 A, 1 4 kv, sizes 1 Ø 85 C-C 90 min CSE-A 630 A, 1 4 kv, size Always select products by cable insulation diameter. Voltage Insulation diameter Conductor cross section Designation Weight kv mm mm² kg/unit CSE-A CSE-A CSE-A CSE-A CSE-A CSE-A CSE-A CSE-A CSE-A CSE-A CSE-A CSE-A Cable connector complete with screen separation kit CSE-A P CSE-A P CSE-A P CSE-A P CSE-A P CSE-A P 1.4 Ø 81 C-C 85 min 194 Ø 74 CSE-A 630 A, 36 4 kv sizes 1. Ø 85 C-C 90 min 0 90 CSE-A 630 A, 36 4 kv size Product range ABB cable accessories 7. 4 kv 015 /4

34 Premolded screened separable cable connector for cables with copper tape screen CSE-A 1 36 kv, 630 A Application areas Premolded screened separable connector for XLPE- and EPR-insulated 1- or 3-core 1 36 kv cables, with Al- or Cuconductors with Cu-tape screens, with or without aluminium or steel wire armouring. Can be installed both indoors and outdoors. Fits standard bushings of outer cone type according to EN Connectors with rated current: 630 A: Interface type C1 with bolt M A: Interface type C with bolt M16. CSE-A 1630 / CSE-A 4630 CSE-A Standard Meets the requirements of: CENELEC, HD 69.1 S Ø 81 C-C 85 min 17 Dimensions in mm. 9 Design CSE-A is manufactured in rubber with three layers; a conductive inner layer, an insulation layer and a conductive outer layer, that are vulcanized together for the best possible interface between the layers. The cable connector includes both a capacitive test point with protection and an integrated earthing wire. Ø 7 CSE-A 630 A, 1 4 kv, sizes 1 56 Delivered in 3-phase kits, complete with cable lugs, bolt connection, earthing kit and stress grading adapters. The adapters are designed to ensure a reliable installation. For 3-core cables, a branch seal kit is included. Ø 85 C-C 90 min Always select products by cable insulation diameter Voltage Insulation diameter Conductor cross section Outer sheath diameter Designation Weight kv mm mm² mm kg/unit Elbow cble connectors, 3 x 1-core cables CSE-A R CSE-A S CSE-A T CSE-A S CSE-A T CSE-A T CSE-A S CSE-A T CSE-A U 9.4 Elbow cable connectors, 3-core cables CSE-A RA CSE-A SB CSE-A TB CSE-A TB CSE-A SB CSE-A TB CSE-A TB CSE-A SB CSE-A TB 7.3 CSE-A 630 A, 1 4 kv, size 3 Ø 81 C-C 85 min 194 Ø 74 CSE-A 630 A, 36 4 kv sizes 1. Ø 85 C-C 90 min /5 015 ABB cable accessories 7. 4 kv Product range CSE-A 630 A, 36 4 kv size 3.

35 Accessories, to be ordered separately CSE-A 1 4 kv, 630 A IH-A 4630, IH 4630 Insulating hood, of flexible rubber with outer conductive layer and a preinstalled insulating rod. To be mounted on the bushing in a switchgear or a transformer 630 A to insulate it when a cable is temporarily disconnected but other cables are energized. PSSK Screen separation kit to achieve a metallic screen on each core for 3-core cable. CSAP-A Surge arrestor, 630 A. CSEP-A Parallel cable connector. IP 630 Screened insulating plug for installation in the connector so that the cable can be energized even when disconnected from the switchgear or transformer 630 A. TSH Branch seal kit to achieve a sealing on each core for 3-core cable. PG 630 Bushing for voltage testing. JPB 630 Universal earthing device with two fields of application for 630 A and 1-4 kv: As earthing-for-work device mounted at the back of a connected cable connector CSE-A for 630 A. As short-circuit protective earthing mounted in front of a disconnected cable connector CSE-A for 630 A. PC 630/50 Parallel coupling piece. Replaces the plug in CSE-A 630 A when making a parallel connection to CSE-A 50 A. Delivered in 3-phase kits and hex bit socket. MA-A 630 Measurement adapter used for mega ohm Ω measurements and to perform different measurements up to 5 kv DC, for example determination of phases, 630 A. PG-A 630 Bushing for voltage testing, 36 4 kv. JPA V Tool for earthing device, JPB 630. Designation Description Qty. Weight See page per kit kg/kit IH-A 4630 Insulating hood, 1 4 kv, 630 A 3 5. /6 IH-A 4630 Insulating hood, 36-4 kv, 630 A 3 5,5 /6 IP 630 Screened insulating plug, 630 A 1. /6 PC 630/50 Parallel coupling piece /6 PSSK Screen separation kit, heat-shrink for 3-core cable /47 TSH Branch seal /48 MA-A 630 Measurement adapter, 630 A 3 0. /6 CSAP-A Surge arrestor, 630 A, 1 4 kv /8 PG 630 Bushing for voltage testing, 630 A, 1 4 kv /6 PG-A 630 Bushing for voltage testing, 630 A, 36 4 kv 1.0 /6 CSEP-A Parallel cable connector /7 JPB 630 Earthing device, 630 A /6 JPA V Tool for earthing-for-work device, JPB /6 Product range ABB cable accessories 7. 4 kv 015 /6

36 Parallel separable connector for 630 A cable connector CSEP-A 1 4 kv Application area CSEP-A is a screened separable parallel cable connector designed to be connected to a screened separable cable connector type CSE-A 630. Used with XLPE- och EPRinsulated 1- or 3-core cables with Al- or Cu-conductor for 1 4 kv. Standard Fulfills the requirements of CENELEC HD 69.1 S. Design CSEP-A is manufactured in rubber with three layers; a conductive inner layer, an insulation layer and a conductive outer layer that are vulcanized together for the best possible interface between the layers min 85 Dimensions in mm. When installing CSEP-A on the CSE-A the plug and the protective cap must be moved from CSE-A to parallel connector CSEP-A. In that way the capacitive test point is re-established Delivered in 3-phase kits complete with cable lugs, bolt connections, stress grading adapters and also an integrated earthing wire. Note: For 3-core cables with common Cu-screen wires, a screen separation kit or a branch seal kit must be used. For screen separation kit see table at page 3/45. CSEP-A, 1 4 kv sizes min 90 Always select products by cable insulation diameter. Voltage Conductor cross section Insulation diameter Designation Weight kv mm² mm kg/kit CSEP-A CSEP-A CSEP-A CSEP-A CSEP-A CSEP-A CSEP-A CSEP-A CSEP-A CSEP-A CSEP-A CSEP-A Parallel connector complete with screen separation kit CSEP-A P CSEP-A P CSEP-A P CSEP-A P CSEP-A P CSEP-A P 11.9 CSEP-A, 1 4 kv size CSEP-A, 36 4 kv sizes CSEP-A, 36 4 kv size 3 81 min min 90 /7 015 ABB cable accessories 7. 4 kv Product range

37 Parallel screened separable connector for cable with copper tape screen, 630 A CSEP-A 1 4 kv Application area CSEP-A is a screened separable parallel connector designed to be connected to a screened separable connector type CSE-A 630. Used with XLPE- and EPR-insulated 1- or 3-core 1 36 kv cables, with Al- or Cu-conductors with copper tape screens, with or without aluminium or steel wire armouring. Standard Fulfills the requirements of CENELEC HD 69.1 S. Design CSEP-A is manufactured in rubber with three layers; a conductive inner layer, an insulation layer and a conductive outer layer that are vulcanized together for the best possible interface between the layers min 85 Dimensions in mm. When installing CSEP-A on the CSE-A, the plug and the protective cap must be moved from CSE-A to the parallel connector CSEP-A. In that way the capacitive test point is re-established Delivered in 3-phase kits complete with cable lugs, bolt connections, stress grading adapters and also an integrated earthing wire. Note: For 3-core cables with common Cu-tape screen, a screen separation kit or a branch seal kit must be used. See table at page 3/45. CSEP-A, 1 4 kv sizes min 90 Always select products by cable insulation diameter. Voltage Insulation diameter Conductor cross section Designation Weight kv mm mm² kg/kit Parallel connector for 3 x 1-core cables CSEP-A R CSEP-A S CSEP-A T CSEP-A S CSEP-A T CSEP-A T CSEP-A S CSEP-A T CSEP-A U 9.9 Parallel connector for 3-core cables CSEP-A RA CSEP-A SB CSEP-A TB CSEP-A TB CSEP-A SB CSEP-A TB CSEP-A TB CSEP-A SB CSEP-A TB 7. CSEP-A, 1 4 kv size CSEP-A, 36 4 kv sizes CSEP-A, 36 4 kv size 3 81 min min 90 Product range ABB cable accessories 7. 4 kv 015 /8

38 Dimensional drawings Parallel connection of CSE-A and CSEP-A 1 4 kv Parallel connection of two CSE-A 1 4 kv Connection of parallel connector type CSEP-A to cable connector type CSE-A meets the requirements according to the standard CENELEC HD 69.1 S. Dimensions in mm kv 1 4 kv CSEP-A size 1 + CSE-A size 1 CSEP-A size 3 + CSE-A size 1 CSEP-A size 1 + CSE-A size 3 CSEP-A size 3 + CSE-A size CSEP-A size 1 + CSE-A size 1 CSEP-A size 3 + CSE-A size 1 CSEP-A size 1 + CSE-A size 3 CSEP-A size 3 + CSE-A size 3 Parallel connection of two cable connectors type CSE-A with parallel coupling piece PC / PC L meets the requirements according to the standard CENELEC HD 69.1 S Parallel connection of two CSE-A size 1, 1 4 kv Parallel connection of two CSE-A size 3, 1 4 kv Parallel connection of two CSE-A size 1, 36 kv Parallel connection of two CSE-A size 3, 36 kv Accessories, to be ordered separately: Designation Description See page TSH, SSH Branch seal and additional hoses /48 PSSK Screen separation kit /47 TSH SSH PSSK /9 015 ABB cable accessories 7. 4 kv Product range

39 Surge arresters for 630 A separable connector CSAP-A 6 4 kv Application area CSAP-A is a screened separable surge arrester designed to be connected in parallel with screened separable cable connector type CSE-A 630 A. Protects electrical components against overvoltage and transients. Standard Fulfills the requirements of IEC Parallel connection of surge arrester CSAP-A connected to cable connector CSE-A meets the requirements according to standard CENELEC HD 69.1 S. Design CSAP-A includes a premolded body, manufactured in three layers; a conductive inner layer, an insulation layer and a conductive outer layer vulcanized together for the best possible interface between the layers mm 89.5 min 90 Dimensions in mm. The surge arrester s active part is made of metal oxide. The connected earth braid manages short circuit currents according to the standard When installing CSAP-A on the CSE-A 630, the plug and the protective cap must be moved from CSE-A to the surge arrester CSAP-A. In that way the capacitive test point is re-established. Delivered in 1-core kits complete with bolt connection, earth braid and also an integrated earthing wire. CSAP-A sizes 1/5 and 1/ mm 89.5 min 90 Voltage Designation Weight kv kg/kit 6 CSAP-A 6/5 ka CSAP-A 6/10 ka CSAP-A 1 5 ka CSAP-A 1 10 ka CSAP-A 4 5 ka CSAP-A 4 10 ka Explanation of symbols according to IEC Uc continuous operating voltage rms Ur rated voltage rms Ures residual voltage peak at 8/0 μs In nominal discharge current 8/0 μs Ihc high current impulse 4/10 μs Is short circuit rating 50 Hz rms for 0. s Technical data Designation Uc Ur Ures In Ihc Is IEC line [kv] [kv] [kv] [ka] [ka] [ka] discharge class CSAP-A 6/5 ka CSAP-A 6/10 ka CSAP-A 1 5 ka CSAP-A 1 10 ka CSAP-A 4 5 ka CSAP-A 4 10 ka CSAP-A sizes 4/5 and 4/ CSE-A sizes 1 + CSAP-A CSE-A size 3 + CSAP-A Product range ABB cable accessories 7. 4 kv 015 /30

40 Shrouded termination, 630 A TB-A 1, 1 kv Use Shrouded cable termination for connecting XLPEand EPR-insulated 1 kv cables in switchgear, type ABB SafeLink. Standard Meets the requirements of: CENELEC, HD 69.1 Design TB-A is a shrouded cable termination made of rubber. Supplied in complete 3-phase kits including cable terminations, two-piece boots, cable lugs with shear-off bolts, grease, cleaning cloth and installation instructions. Due to the smart installation method the upper part of the two-piece boot will stick to the bushing. For measuring, the lower part of the boot can easily be pulled down to expose the palm of the bushing. Note: For 3-core cables with common Cu-screen wires, a screen separation kit or a branch seal kit must be used. Connector cross section Designation Length Weight mm² mm kg/kit Three 1-core or one 3-phase kits TB-A TB-A TB-A Accessories, to be ordered separately PSSK TSH Designation Description See page PSSK Screen separation kit /47 TSH Branch seal /48 / ABB cable accessories 7. 4 kv Product range

41 Shrouded termination, 630 A KAP 630, 1 4 kv Use For XLPE- and EPR-insulated 1- or 3-core cables with Al or Cu conductor for 1 4 kv. KAP can be used to connect a cable to gas-insulated switchgear and in other compact installations, as well as for substation transformers. To be used indoors only. Standards Meets the requirements of: SEN SS Edition 4 Design KAP is an insulated connector made of rubber. It is supplied complete with cable termination and bolt cable lug. The covers are provided with a removable plastic plug to allow direct voltage testing on the conductor. Also available for parallel installation. The connectors are supplied in 3-phase kits. Dimensions in mm. Note: For 3-core cables with common Cu-screen wires, a screen separation kit or a branch seal kit must be used. For plug-in connector 50 A or 400 A, choose CSE-A ~ Always select products by Insulation diameter. 70 KAP 630 SCL C-C 133 KAP 630 P SCL Installed in parallel with KAP 630 SCL. Type Insulation diameter Conductor cross section Designation Connection Weight Ø 1 kv 4 kv type mm mm² kg/item Standard KAP SCL 3 Bolt M16. Standard KAP 630- SCL 5 Bolt M16.5 Parallel KAP 630 P-1 SCL 3 Bolt M16.5 Parallel KAP 630 P- SCL 5 Bolt M16.5 Product range ABB cable accessories 7. 4 kv 015 /3

42 Dimensional drawings and accessories KAP 630 The indicated recommended minimum distances are generally applicable. For applications in which type testing has been performed, other minimum distances may be applied. This is the case, for example, for gas-insulated Ring Main Unit (RMU). A B C D D D Recommended minimum distances Recommended minimum air gap Voltage Insulation level A B C D kv kv mm Accessories, to be ordered separately PSSK TSH Designation Description See page PSSK Screen separation kit /47 TSH Branch seal /48 / ABB cable accessories 7. 4 kv Product range

43 Insulating boot KAP 300 U, 1 4 kv Use For XLPE- and EPR-insulated 1- or 3-core cables with Al or Cu conductor, for 1 4 kv, indoors. KAP 300 U is especially well suited for the renovation of, for example, oil-filled transformer boxes, when replacing paper-insulated cable with XLPE-insulated cable. An indoor termination type SOT (must be ordered separately) is installed together with KAP 300 U on the XLPE-insulated cable, thus insulating the connection point when the oil is drained from the cable box. KAP 300 U can also be mounted straight. Standards Meets the requirements of: SEN SS Edition 4 10 Design An insulating boot made of rubber. The covers are fitted with a removable plastic plug to allow direct voltage testing on the conductor Note: For 3-core cables with common Cu-screen wires, a screen separation kit or a branch seal kit must be used. See dimensional drawings for minimum distance to earth. Termination and cable lug are not included. 44 Elbow KAP 300 U. Straight KAP 300 U. Conductor cross section Designation Specification Weight 1-4 kv mm² kg/item KAP 300-U Bolt.0 Accessories, to be ordered separately Recommended minimum distances The indicated recommended minimum distances are generally applicable. Recommended minimum air gap Voltage Insulation level A B C D kv kv mm A B C D B PSSK TSH SOT SCL-B Designation Description See page PSSK, PSSK-E, PSSK L Screen separation kit /47 TSH Branch seal kit /48 SCL-B Bolt cable lug /53 SOT Cable termination /37 /41 Product range ABB cable accessories 7. 4 kv 015 /34

44 Dimensional drawings Installation of cable termination Minimum air gap Max voltage Indoor Outdoor kv Phase to earth A Phase to phase B Phase to phase C Phase to earth A Phase to phase B C B A Minimum air gap between cores* in parallel 10 kv 1 kv 4 kv 36 kv C 10 mm 10 mm 30 mm 50 mm * The cable terminations must be placed in level. / ABB cable accessories 7. 4 kv Product range

45 Premolded cable termination, indoors SOT 7. kv Use Premolded cable termination for XLPE- and EPR-insulated cables 1- or 3-core with Al or Cu conductor for 6.6/7. kv, indoors. It can also be installed in an indoor humid environment*. Standards Meets the requirements of: CENELEC, HD 69.1 S1 Design Premolded cable termination made of silicone rubber with integrated field control. 145 Min 00 The length of the termination is approximate 145 mm which also makes it suitable for installations in narrow spaces. The termination is supplied in kits for 3 single-core cables. Note: Cable lugs are to be ordered separately. Branch seal TSH for 3-core cable is to be ordered separately. * For the best watertightness in an indoor humid environment, order branch seal kit TSH. See page /48. Always select products by cable insulation diameter. Insulation diameter Conductor cross section Designation Weight mm mm² kg/kit 3-core / three 1-core SOT SOT SOT Product range ABB cable accessories 7. 4 kv 015 /36

46 Premolded cable termination, indoors and outdoors, complete SOT SCL 1 36 kv Use Premolded cable termination for XLPE- and EPR-insulated 1- or 3-core cable with Al- or Cu- conductor for 1 36 kv. The indoor termination can also be installed in a humid indoor environment*. Standard Fulfills requirements of: SS edition 1 IEEE CENELEC HD 69.1 Design Premolded cable termination made of silicone rubber with integrated field control and top sealing. The outdoor type is provided with permanent sheds for extended creepage distance. The cable termination is supplied in kits for 1- or 3-core cables. The kits include: Bi-metalic shear-off cable lugs SCL-B for Al- and Cuconductor. The cable lug has bolts which breaks off once the correct torque is reached. Branch seal and protective heat-shrink hoses in kits for outdoor, 3-core cables. SOT 1- and 3-core outdoor. SOT 1- and 3-core indoor. * For the best watertightness in an indoor humid environment, order branch seal kit TSH. See page /48. Always select products by cable insulation diameter. Insulation Conductor cross section Designation weight Designation weight diameter 1 kv 4 kv 36 kv mm mm² kg/kit kg/kit 3-core / 3 x 1-core indoor 1-core indoor SOT 41 A-3 SCL 0.90 SOT 41 A SCL SOT 41 3 SCL SOT 41 SCL SOT 4-3 SCL SOT 4 SCL SOT 4-3 SCL5B SOT 4-3 SCL SOT 4 SCL SOT 4 B-3 SCL SOT 4 B SCL core outdoor including branch seal kit 1-core outdoor SOT 43 A-3 SCL.0 SOT 43 A SCL SOT 43-3 SCL3.55 SOT 43 SCL SOT 44-3 SCL SOT 44 SCL SOT 45-3 SCL5B 5.10 SOT 45 SCL5B SOT 45-3 SCL6 5.0 SOT 45 SCL core indoor/outdoor including branch seal kit SOT SCL x 1-core outdoor SOT 43 A-31 SCL SOT SCL SOT SCL SOT SCL5B 4, SOT SCL SOT SCL6 5 3 x 1-core indoor/outdoor 1-core indoor/outdoor SOT SCL5.45 SOT 361 SCL SOT SCL SOT 36 SCL / ABB cable accessories 7. 4 kv Product range

47 Premolded cable termination, indoors and outdoors SOT 1 36 kv Use Premolded cable termination for XLPE- and EPR-insulated cables 1- or 3-core with Al or Cu conductors for 1 36 kv. The indoor termination can also be installed in a humid indoor environment*. Standard Meets the requirements of: CENELEC, HD 69.1 S1 IEEE Design Premolded cable termination made of silicone rubber with integrated field control and top sealing. The outdoor type is provided with permanent sheds for extended creepage distance. The termination is supplied in kits for 1- or 3-core cables. 3-phase kits for outdoor use include branch seal and protective heat-shrink hoses. SOT 1- and 3-core outdoor. SOT 1- and 3-core indoor. * For the best watertightness in an indoor humid environment, order branch seal kit TSH for 3-core cables. See page /48. Note: Cable lugs are to be ordered separately. Always select products by cable insulation diameter. Insulation Conductor cross section Designation Weight Designation Weight diameter 1 kv 4 kv 36 kv mm mm² kg/kit kg/kit Indoor termination incl. branch seal for 3-core SOT 41A-3C SOT 41 3C SOT 41 3D SOT 4-3D 1.4 Indoor termination 3-core / 3 x 1-core Indoor termination 1-phase kit SOT 41 A SOT 41 A SOT SOT SOT SOT ** ** SOT 4 B SOT 4 B 0.30 Outdoor termination incl. branch seal for 3-core Outdoor termination 1-phase kit SOT 43 A SOT 43 A SOT SOT SOT Indoor/outdoor termination 3-core Indoor/outdoor termination 1-phase kit SOT Outdoor termination 3 x 1-core Outdoor termination 1-phase kit SOT SOT SOT SOT SOT SOT ** * SOT SOT Indoor/outdoor termination 3 x 1-core Indoor/outdoor termination 1-phase kit SOT SOT * SOT SOT * Can be mounted on cables with 800 and 1000 mm² by using silicone rubber tape IA 34 (1 per kit) as top seal, see page 3/3. Product range ABB cable accessories 7. 4 kv 015 /38

48 Premolded cable termination for 1-core cable with Cu-tape screen SOT kv Use Premolded cable termination for XLPE- and EPR-insulated 1-core cables with Al or Cu conductors and Cu-tape screen for kv. The indoor termination can also be installed in a humid indoor environment*. Standard Meets the requirements of: CENELEC HD 69.1 S1 IEEE Design Premolded cable termination made of silicone rubber with integrated field control and top sealing. The outdoor type is provided with permanent sheds for extended creepage distance. The indoor termination can also be installed in a humid indoor environment. The kits includes copper braids and constant force springs for connection of the Cu-tape screen to earth. One kit includes material for three single core terminations. Note: Cable lugs are to be ordered separately. Always select products by cable insulation diameter. Insulation diameter Conductor cross section Designation Size of Ø 7. kv 1 kv 17.5 kv 4 kv 36 kv copper braid mm mm² mm² Indoor termination for three 1-core cables with Cu-tape screen SOT R SOT 10-3 R SOT S SOT 41A-3 R SOT 41-3 R SOT 41-3 S SOT 4-3 S SOT 4-3 T SOT T SOT U 35 Outdoor termination for three 1-core cables with Cu-tape screen SOT 43A-3 R SOT 43-3 R SOT 43-3 S SOT 44-3 S SOT 44-3 T SOT 45-3 T SOT T SOT U 35 / ABB cable accessories 7. 4 kv Product range

49 Premolded cable termination for 3-core cable with Cu-tape screen SOT kv Use Premolded cable termination for XLPE- and EPR-insulated cables 3-core with Al or Cu conductors and Cu-tape screen for kv. Standard Meets the requirements of: CENELEC HD 69.1 S1 IEEE Design Premolded cable termination made of silicone rubber with integrated field control and top sealing. The outdoor type is provided with permanent sheds for extended creepage distance. The indoor termination can also be installed in a humid indoor environment. The kits includes Cu-braids and constant force springs for connection of the Cu-tape screen to earth. The kits also include branch seal and protective hoses of heat-shrink type. Note: Cable lugs are to be ordered separately. Always select products by cable insulation diameter. Insulation diameter Conductor cross section Designation Size of Ø 7.5 kv 1 kv 17.5 kv 4 kv 36 kv Cu-braid mm mm² mm² Indoor termination for 3-core cables with Cu-tape screen SOT RC 3 x SOT 10-3 RC 3 x SOT 10-3 RD 3 x SOT SD 3 x SOT 41A-3 RC 3 x SOT 41 3 RC 3 x SOT 41 3 RD 3 x SOT 41 3 SD 3 x SOT 4-3 SD 3 x SOT 4-3 TD 3 x SOT TB 3 x SOT UB 3 x 35 Outdoor termination for 3-core cables with Cu-tape screen SOT 43A-3 RA 3 x SOT 43-3 RA 3 x SOT 43-3 RB 3 x SOT 43-3 SB 3 x SOT 44-3 SB 3 x SOT 44-3 TB 3 x SOT 45-3 TB 3 x SOT TB 3 x SOT UB 3 x 35 Product range ABB cable accessories 7. 4 kv 015 /40

50 Dimensional drawings and accessories Premolded cable termination, SOT 1 36 kv D I I I L I Creepage distance L SOT indoor SOT outdoor Designation I L D Creepage distance mm SOT 41/4/4 B 35 min 300 SOT 43/44/ min /75/80 min 50 SOT 46/361/ min /85 min 75 Accessories, to be ordered separately SCL-B UKR FK TSH PSSK Designation Description See page SCL-B Cable lug /53 UKR Universal clamp for fastening cable to a pole, etc. 4/3 JSA, JXT Earthing kits when the cable does not have a Cu-wire screen /49 FK Overhead line clamp /5 TSH, SSH Branch seal kit /48 PSSK Screen separation kit (if needed for indoor) /47 / ABB cable accessories 7. 4 kv Product range

51 Premolded termination with geometrical field control, indoors APIT 1 36 kv Use Cable termination with geometric field control for XLPE- and EPR-insulated 1- or 3-core cables. This type of termination is recommended to be used in applications were significant harmonics may occur. Standard Meets the requirements of: CENELEC HD 69.1 IEEE Design The cable termination consists of a premolded stress relief cone with an integrated deflector for geometrical field control. The cable s conducting layer is connected to the stress relief cone for optimal function. The termination is supplied in kits for 3-core cables. Ø A Note: Cable lugs and branch seal for 3-core cables are to be ordered separately. Always select products by cable insulation diameter. Designation Insulation diameter Cable cross section 1kV 4kV 36kV Diameter Weight Creepage distance Length Cable cross section Creepage distance Length Cable cross section Creepage distance A A A Ø mm mm² mm mm mm² mm mm mm² mm mm mm kg/each APIT APIT APIT APIT APIT APIT APIT APIT APIT APIT Length Accessories, to be ordered separately SCL-B UKR FK TSH PSSK Designation Description See page SCL-B Cable lug /53 UKR Universal clamp for fastening cable to a pole, etc. 4/3 JSA Earthing kits when the cable does not have a Cu-wire screen /49 FK Overhead line clamp /5 TSH, SSH Branch seal kit and extension protective hoses /48 PSSK Screen separation kit /47 Product range ABB cable accessories 7. 4 kv 015 /4

52 Premolded termination with geometrical field control, outdoors APSEA 1 36 kv Use Cable termination with geometric field control for XLPE- and EPR-insulated 1- or 3-core cables. This type of termination is recommended to be used in applications were significant harmonics may occur. It is also suitable for environments where a longer creepage distance is required. Standard Meets the requirements of: CENELEC HD 69.1 IEEE D A Design The cable termination is made of rubber with prefabricated geometrical field control in the stress relief cone. The cable s conducting layer is connected to the stress relief cone for optimal function. The creepage distance is built up with separate sheds and also a top cap that provides a diffusion sealed protection against the cable lug. The termination is supplied in kits for 3-core cables. APSEA 1 kv APSEA 4 kv APSEA 36 kv Note: Top caps, three pieces must be ordered separately. Top bolts, cable lugs and branch seal for 3-core cables are to be ordered separately. Always select products by cable insulation diameter. Voltage Insulation diameter Conductor Designation Top cap type Creepage Length Diameter Weight cross section distance A Ø mm mm² mm mm mm kg/kit APSEA 11 3 THS APSEA 1-3 THS APSEA 13-3 THS APSEA 14-3 THS APSEA 15-3 THS APSEA 16-3 THS APSEA 17-3 THS APSEA 18-3 THSA APSEA 41 3 THS APSEA 4-3 THS APSEA 43-3 THS APSEA 44-3 THS APSEA 45-3 THS APSEA 46-3 THS , APSEA 47-3 THS APSEA 48-3 THSA APSEA 49-3 THSA APSEA THS APSEA 36-3 THS APSEA THS APSEA THS APSEA THS APSEA THS APSEA THS APSEA THSA APSEA THSA APSEA THSA / ABB cable accessories 7. 4 kv Product range

53 Accessories, to be ordered separately APSEA 1 36 kv Top caps, cable lugs and top bolts are supplied in one-piece kits, to be ordered separately. Top bolts and cable lugs The top cap THS or THSA is selected with regards to the size of the cable termination (see table at page 3/1) and the outer diameter of thickest part of the cable lug or top bolt. See dimension B in the table below. THS, THSA Top cap. Top hole Top cap Top cap Max. diameter of cable connection mm THS THSA 30 THS 8 THSA 8 40 THS 37 THSA THS 47 THSA THS 60 THSA 60 A B 15 A/K-TBF SKR Top bolt. Tightening torque, 45 Nm. A SCL-B Cable lug with shear-off bolts. B Accessory Diameter Cable Designation Cable Net A B cross section Top bolts conductor weight material mm mm² kg/item Top bolt A-TBF SKR Al 0.5 Top bolt , 185 A-TBF SKR Al 0.5 Top bolt A-TBF SKR Al 0.8 Top bolt , 400 A-TBF SKR Al 0.8 Top bolt A-TBF SKR Al 0.9 Top bolt A-TBF SKR Al 0.9 Top bolt A-TBF SKR Al 1. Top bolt A-TBF SKR Al 1. Top bolt A-TBF SKR Al 1.1 Top bolt K-TBF SKR Cu 1.6 Top bolt , 185 K-TBF SKR Cu 1.6 Top bolt K-TBF SKR Cu.4 Top bolt , 400 K-TBF SKR Cu.4 Top bolt K-TBF SKR Cu.8 Top bolt K-TBF SKR Cu.8 Top bolt K-TBF SKR Cu 4.0 Top bolt K-TBF SKR Cu 3.8 Top bolt K-TBF SKR Cu 3.5 Cable lug SCL-B 95-1 Al/Cu 0.10 Cable lug SCL-B Al/Cu 0.5 Cable lug SCL-B 40-1 Al/Cu 0.30 Cable lug SCL-B Al/Cu 0.35 Cable lug SCL-B Al/Cu 0.70 Cable lug SCL-B Al/Cu 0.90 Accessories, to be ordered separately THS, THSA A/K-TBF SKR SCL-B UKR Designation Description See page THS, THSA Top caps for outdoor termination APSEA /44 A/K-TBF SKR Top bolt /44 SCL-B Cable lug /53 UKR Universal clamp for fastening cable to a pole, etc. 4/3 FK Overhead line clamp /5 TSH, SSH Branch seal kit and protective hoses /48 PSSK Screen separation kit /47 JSA Earthing kits when the cable does not have a Cu-wire screen /49 FK TSH SSH PSSK Product range ABB cable accessories 7. 4 kv 015 /44

54 Outdoor cable termination APED 1 36 kv Use Suitable for outdoor and indoor installations in which the termination is to be used as a fixed connection point. Standard Meets the requirements of: IEC IEEE 48 Design The cable termination consists of a composite or porcelain insulator fi tted on a box body made of aluminium. The electrical stress control component is a premolded rubber stress cone. The insulator has sheds of short-long type and is fi lled with synthetic insulating oil. The composite insulator is available in grey. A post insulator kit which includes three stand-off insulators and a supporting plate used for insulated installation can be included. A top bolt with a diameter of 30 mm is included in the kit. Installation Installation can be simplifi ed by assembling the termination horizontally on the ground before lifting it into place. The following cable data should be stated when ordering: Voltage Diameter over prepared insulation Conductor cross section Conductor material copper or aluminium Screen, sheath design and cross section Overall cable diameter Insulator, composite Top bolt with bolt connection as standard Ø Designation Insulation diameter Cable overall diameter Max conductor Creepage distance Net weight min max max Ø cross section min mm mm mm² mm kg/item APED 360 P / ABB cable accessories 7. 4 kv Product range

55 Technical specification APED 1 36 kv Creepage distance Max. allowed force acting on the top bolt, horizontally and vertically: 000 N. Ø 70 Max 35 Ø Attachment to bracket for insulated installation Three 18 mm holes for M16 bolts Ø Inclination up to 30. GAP-APED Rod gap. Attachment to beam Three 14 mm hole for M10 bolts. Accessories, to be ordered separately PIU-APED Post insulator kit for fixing to a supporting plate for insulated screen/sheath installation. Designation Description Use GAP-APED Rod gap Protects against over-voltage. PIU-APED Post insulator kit When insulated installation. Product range ABB cable accessories 7. 4 kv 015 /46

56 Screen separation kit PSSK Use Heat-shrink screen separation kit for XLPE- and EPRinsulated 3-core cables with common Cu- or Al-wire screen. Used to prevent flashover between the phases in small spaces, for example in a switchgear bay. Used together with screened separable connector CSE-A, shrouded termination KAP or cable termination SOT. Standard Meets the requirements of Swedish standard, EBR KJ 41:09. Design PSSK: Length 1. m for cable with Cu-wire screen. A copper stocking with a screen cross section of 5 mm² is fitted on each phase and connected to the wire screens of the cable. A heat-shrink branch seal and protective hoses are used as an outer sheath. It can also be cut for shorter installation. PSSK E: Length 1. m for cable with Al-wire screen. A copper stocking with a screen cross section of 5 mm² is fitted on each phase and connected to the wire screens of the cable. A heat-shrink branch seal and protective hoses are used as an outer sheath. It can also be cut for shorter installation. PSSK L: Length m for cable with Cu- or Al-wire screen. The extended variant in heat-shrink when the branch area might be placed below ground. To achieve watertightness; mastic, vulcanizing tape and protective tape are applied to the lower part of the branch seal. PSSK Heat-shrink hose L Branch seal PSSK with cable termination CSE-A. Note! Cable connectors or cable terminations to be ordered separately. Conductor cross section Designation Length Weight 1 kv 4 kv 36 kv 4 kv L mm² mm Kg/item PSSK PSSK PSSK PSSK 1 E PSSK E PSSK 3 E PSSK 1 L PSSK L PSSK 3 L PSSK L with cable termination CSE-A. L / ABB cable accessories 7. 4 kv Product range

57 Branch seal kit TSH Use TSH L are branch seal kits for sealing the 3-core cables branch when installing cable termination SOT, indoor or outdoor. SSH are kits with protective hoses to be used as additional extension of the branch seal together with TSH L. Design Branch seal and protective hoses of heat-shrink material as per below, lashing wire for mechanical reinforcement of the branch, earth wire and non-corrosive band-strip for connection of earth potential to termination. TSH 1 L and TSH L include a branch seal and 3 protective hoses, length 1. m. SSH 1 L and SSH L include only 3 heat-shrink protective hoses, length 1. m. SSH 1 S and SSH S include only 3 heat-shrink hoses, length 0.4 m. Designation Outer diameter cable Core diameter Cable cross section Length Weight Min Max Min Max 1 kv 4 kv 36 kv mm mm mm² m kg/kit TSH 1 L Approx TSH 1 S Approx TSH L Approx TSH S Approx SSH 1 L SSH 1 S SSH L SSH S Product range ABB cable accessories 7. 4 kv 015 /48

58 Earthing kit for cable terminations JXT 1 3 and JSA 4 6 Earthing kits for XLPE- and EPR-insulated cables with earth screen of Cu-tape or Al-foil. The kits are designed for cable terminations and cable connectors. There is enough material in the kits for three 1-core cable terminations.there are also complete kits for 1-core cables. Cu-tape screen Al-foil Cable For cables with Cu-tape screen For cables with Al-foil screen Ø Screen mm Earthing kit JXT 1 JXT JXT 3 JSA 4 JSA 5 JSA 6 Cable accessories IV-tape IV-tape Shrink sleeve SOT 41 X X X SOT 4 X X SOT 4 B X SOT 43 X X SOT 44 X X X SOT 45 X X SOT 46 X X SOT 361 X X SOT 36 X CSS-A X X X CSS-A X X X CSS-A X X X CSS-A X X X CSE-A X X X CSE-A X X X CSE-A X X X CSE-A X X X CSE-A X X X CSE-A X X X CSE-A X X X CSE-A X X X CSE-A X X X CSE-A X X X CSE-A X X CSE-A X X X CSE-A X X X CSE-A X X CSE-A X X X CSE-A X X CSE-A X X X CSE-A X X CSE-A X X CSE-A X X X CSE-A X X CSE-A X X X CSE-A X X CSE-A X X KAP SCL 3 X X KAP 630- SCL 5 X X X X APIT 4 X X APIT 5 X X APIT 6 X X APIT 7 X X APIT 8 X X APIT 9 X APIT 10 X APSEA xx1 X X APSEA xx X X APSEA XX3 X X APSEA XX4 X X APSEA XX5 X X APSEA XX6 X APSEA XX7 X For cables with Cu-tape screen JXT 1 3 contains copper braids which are connected to the screen with constant force springs. For cables with aluminium foil screen JSA 4 6 contains copper braids which are connected to the screen with a plate and constant force springs. Note: If the cable has only Cu-wire screen, no earthing kit is needed. For cables with other screen types, or 3-core cable with Cu-tape screen, contact us for information. / ABB cable accessories 7. 4 kv Product range

59 Screen connection for cable joints JSA Screen connection kits for XLPE- and EPR-insulated cables with earth screen of copper tape or aluminium foil. The kits are designed for cable joints type SOJ and SMXB. There is enough material in the kits for one 3-core joint or three 1-core joints. Armouring Copper tape screen Cables with copper tape screen JSA contains copper stockings which are connected to the screen with constant force springs. Connections to armouring (if any) are made with lashing wire. Aluminium foil Cables with aluminium foil screen JSA contains copper braids which are connected to the screen with a plate and constant force springs. Note: If the cable has only copper wire screen, no earthing kit is needed. For cables with other screen types, or 3-core cables with Cu-tape screen, contact us for information. Cable For cables with copper tape screen For cables with aluminium foil screen Insulation diameter in mm Earthing kit for 1-core JSA 10-1 JSA 11-1 JSA 1-1 JSA 13-1 JSA 14-1 JSA 15-1 JSA 16-1 Earthing kit for 3-core JSA 10-3 JSA 11 3 JSA 1-3 JSA 13-3 JSA 14-3 JSA 15-3 JSA 16-3 Cable joint SOJ 11 X SOJ 1 X X SOJ 13 X X SOJ 14 X X SOJ 15 X X SOJ 41 X X SOJ 4 X X SOJ 43 X X SOJ 44 X X SOJ 361 X X SOJ 36 X X SOJ 363 X X SOJ 364 X X SOJ 365 X X SMXB 1 X SMXB X X SMXB 3 X X SMXB 4 X X SMXB 5 X X SMXB 6 X X SMXB 7 X X SMXB 8 X X SMXB 9 X X SMXB 10 X X SMXB 11 X X Product range ABB cable accessories 7. 4 kv 015 /50

60 Armouring kit for cable joints ARM Use For restoring a steel wire or steel tape armoured cable. ARM can be used with SOJ and SMXB joints, as well as other joints. Selecting ARM for unknown application requires the length of joint L and diameter over joint Ø as below. Ø (mm) L (mm) Design The kit consists of plastic mesh, spiral, funnel with holder, transparent tape and cast resin. The mesh and spiral are placed over the joint and sealed with the tape. The cast resin, which contains a base and hardener in a partitioned bag, is mixed and poured into the funnel until the mesh is full. ARM kit size E.g. Ø 115 and L 850 mm give ARM 3. L Ø The maximum storage temperature for the cast resin is 30 C. Cable joints type SOJ and SMXB are completed with ARM as following Cable joint ARM 1 ARM ARM 3 SOJ 11 3 X SOJ 1-3 X SOJ 13-3 X SOJ 14-3 X SOJ 41 3 X SOJ 4-3 X SOJ 43-3 X SMXB 1 3 X SMXB -3 X SMXB 3-3 X SMXB 4-3 X SMXB 5-3 X SMXB 6-3 X SMXB 7-3 X SMXB 8-3 X Designation Weight kg/item ARM ARM 6.5 ARM ARM / ABB cable accessories 7. 4 kv Product range

61 Cable connection Overhead line clamps ,5 38 FK 10 Overhead line clamp. A greased tin-plate must be used when connecting to a Cu conductor outdoors. FK 300 Overhead line clamp. A greased tin-plate must be used when connecting to a Cu conductor outdoors. FKFB Bracket to connect overhead line clamp FK to surge arrester. Designation Conductor Al or Cu Tightening torque Overhead line Al Weight size max Ø size max Ø mm² mm mm² mm kg/item FK Nm FK Nm when mm² Nm when mm² FKFB 0.1 Product range ABB cable accessories 7. 4 kv 015 /5

62 Cable connection Cable lugs and connectors B A A Ø E Ø C A Ø D C Ø C Ø B SCL-B Bolt cable lug for cable terminations, type SOT, APIT and APSEA. For indoor and outdoor connection of both Cu- and Al-conductors. A greased cupal washer must be used when connecting to a Cu conductor outdoors. Meets the requirements of EN The cable lug is manufactured in an aluminium alloy surface-treated with tin. Shear-off bolts are made of brass. Breaks off once the correct torque is reached. Thanks to its design, the bolts will always break off directly at the edge of the cable lug. Single core kits The kit also includes: Adapter rings for different conductor cross sections. Covers used as protection over the bolts. SC-B Bolt connector with partition and shear-off bolts for Al- and Cu-conductors. Meets the requirements of EN The connector is equipped with shear-off bolts made of brass. Breaks off once the correct torque is reached. Thanks to its design, the bolt will always break off directly at the edge of the connector. The kit also includes: Adapter rings for different conductor cross sections. Covers used as protection over bolts. CW 3013, CW 3817 Cupal washer, to be used when connecting cable lug SCL-B to a copper busbar outdoors. The washers are coated with contact grease. Supplied in bags of three. SH-SKRM Bolt connector with partition and shear-off bolts for Al- and Cu-conductors. Meets the requirements of IEC The connector is equipped with turnable twosided shear-off bolts and a specially designed nut. The bolt is rotated in the appropriate direction, and the nut is then assembled. When the specified torque is reached, the bolt will shear off and the installation is completed. Single core kits. Designation Conductor cross section Al / Cu Tightening Dimensions Weight Round stranded Solid round Sector shaped max Ø torque A B Ø B Ø C Ø D Ø E mm² mm Nm mm kg/unit SCL-B ) SCL-B ) SCL-B ) SCL-B ) ) SCL-B ) ) SCL-B ) ) SC-B ) SC-B ) SC-B ) SC-B ) SC-B 630 5) ) SH-SKRM SH-SKRM SH-SKRM SH-SKRM SH-SKRM ) The bolt will be sheared-off at the right tightenening torque. ) Solid round conductor up to 400 mm². 3) Solid round conductor up to 500 mm². 4) Solid round conductor up to 800 mm². 5) Fits only tape joints, type SMXB. Designation Outer diameter Hole diameter Thickness Weight mm mm mm g/unit CW CW / ABB cable accessories 7. 4 kv Product range

63 Accessories Bird protection Use Used for bird protection on the high-voltage bushings for pole-mounted transformers. To prevent short-circuits caused by larger birds, HU is also placed on the surge arresters. For total protection, HU should be combined with an insulated down-conductor. This is done with insulation spiral HUS. HUF HU 00 On post insulators, HU is used in combination with two wings HUF. This will protect the overhead line closest to the insulator from short-circuiting. Standards HU is designed for bushings with a diameter of 10-0 mm according to DIN 4531 standard. HUS Design All components are made of UV-resistant plastic. HU 150 A Designation Bushing diameter A Pieces/kit Length Weight min max mm m kg/item HU HU HUF HUS Product range ABB cable accessories 7. 4 kv 015 /54

64 3 3/1 015 ABB cable accessories 7. 4 kv Other accessories

65 Table of content General accessories and tools, 1 4 kv Accessories and tools Accessories, tapes 3/3 Other accessories 3/4 Tools 3/6 3 Other accessories ABB cable accessories 7. 4 kv 015 3/

66 Accessories Tapes 3 IA Insulating vulcanizing tape. IA 339 Insulating vulcanizing tape. IA 34 Silicon rubber tape. IA 343 Silicon rubber tape. IA 35 Semiconducting tape. IA 36 Filling tape. IA Protective tape. RULLE Two-layer insulating tape made of EPDM and butyl rubber. IA 41 Electrical tape. Designation Length Width Thickness Weight m mm mm kg/item IA IA IA IA IA IA IA IA IA IA IA IA RULLE RULLE /3 015 ABB cable accessories 7. 4 kv Other accessories

67 Other accessories 3 IK 1105, 1106, 1107, 1108, 1109 Abrasive cloth. IK 1405, IK 1406 Lashing wire (tin-coated copper wire). IK 1401, IK 1407 Lashing wire (tin-coated copper wire). IK 1 Silicone grease, 5 g. IK 33 Grease, type AP paste, 10 g. IK 150 Lashing wire (galvanized steel wire). Designation Length Diameter Coarseness Weight m mm kg/item IK IK IK IK IK IK IK IK IK IK IK IK Other accessories ABB cable accessories 7. 4 kv 015 3/4

68 Other accessories 3 IA 1701 Earthing braid, sold by the metre, 10 mm². IA 1706 Copper net for e.g. SMXB, sold by the metre, approx. 10 mm². IK 30 Washing cloth, 3 alcohol-soaked paper cloths 00 x 300 mm. SKALUS Peeling string for XLPE-insulation. MBR 50 Stainless marking tape, 100 units/kit. Designation Length Width Thickness Weight m mm mm IA kg/m IA kg/m IK kg/unit SKALUS kg/unit MBR kg/kit 3/5 015 ABB cable accessories 7. 4 kv Other accessories

69 Tools (all dimensions in mm) R Torque wrench for bolt connectors, bolt cable lugs, overhead line clamps, etc. Supplied with 7 mm socket head, extension and 8 mm internal hexagon head. Torque range 6-50 Nm. Intercable No. RKS Cable shears for cutting cable Ø max 54 mm RKM 1055 Splitting tool for longitudinal splitting off XLPE-insulation with Ø mm. RKM 670 Cable knife, 30 mm blade. 330 RKM 67 Sheath removing knife with two handles for plastic sheated cable. RKM 1435 and RKM 550 Brace for use in the assembly of the connectors and cable lugs with a torque or shear-off screw. Provides a secure and stable mounting. Adjustable between min and max diameter of the connector or cable lug. Available in two sizes according to the table. Meets the insulation requirements of EN/IEC RKM SB Cordless impact wrench set to fit connectors and cable lugs with shear-off bolts. Meets the insulation requirements of EN/IEC The kit includes: Impact wrench Battery: 18 V/3.0Ah - st Battery charger Allen nut: SW5, SW6, SW8 Designation Description 730 R Torque wrench RKS Cable shears RKM 1055 Splitting tool RKM 1055 K Spare blade for RKM 1055 RKM 67 Sheath removing knife RKM 1435 Brace for bolted connector for outer diameter of mm RKM 550 Brace for bolted connector for outer diameter of 5 50 mm RKM 670 Cable knife RKM SB Cordless impact wrench set Other accessories ABB cable accessories 7. 4 kv 015 3/6

70 Accessories Tools (all dimensions in mm) Intercable No. AV 60 Sheath removing tool for PE-sheathed cable Ø > 0 mm. Model 1700 Series Peeling tool for strippable outer conductive layer on XLPE-insulated cable Ø mm Intercable No. FBS 17 1 Stripping tool for the vulcanized, outer conducting layer of XLPE-insulated cable Ø 10-5 mm. The tool is supplied in a rigid case with a tube of silicone grease. GB-M0 Cutting tool for cable sheath and XLPE-insulation: Diameter: Ø mm Cutting depth: 8 mm GB-M0 S8 Spare peeling blade to GB-M0. Delivered 1 per kit. Designation AV 60 Model 1700 Series FBS 17 1 GB-M0 GB-M0 S8 Description Sheath removing tool Peeling tool Stripping tool XLPE stripping tool Spare blade for GB-M0 S8 3/7 015 ABB cable accessories 7. 4 kv Other accessories

71 Other accessories ABB cable accessories 7. 4 kv 015 3/8 3

72 4 4/1 015 ABB cable accessories 7. 4 kv Universal clamps

73 Table of content Universal clamps Universal clamps UKR 90, UKRA 90 4/3 UKR 00, UKRA 00 4/4 Typical applications, UKR 00,UKRA 00 4/5 4 Universal clamps ABB cable accessories 7. 4 kv 015 4/

74 Universal clamps UKR 90, UKRA 90 UKR 90 Use For fixing cables, tubes, hoses, etc. It will fix round profiles with Ø 0 90 mm or angular profiles with circumferences of mm. 35 Ø 13 4 Design The bracket is made of non-magnetic hot-dip galvanized steel. The band is made of stainless steel SS with rounded edges and has a thickness of 0. mm. The band can be tightened and locked in one operation. The locking bolt is made of die-cast zinc alloy. UKRS 90 Consists of one UKR 90 and a spacer with a hexagon head wood screw for fastening on a wooden pole e.g. UKR 90 Universal clamp. UKJ Earthing plate. 90 UKRS 90 Universal clamp with spacer. UKS 90 Spacer. 78 Applications: UKRA 90 Use For fixing cables with Ø 0 90 mm to the anchor bars in a cable distribution cabinet, etc. Ø 13 Design The bracket is made of non-magnetic hot-dip galvanized steel. The band is made of stainless steel according to SS with rounded edges and has a thickness of 0. mm. The band can be tightened and locked in one operation. The locking bolt is made of die-cast zinc alloy. A spring-loaded nut with a reversible locking washer offers a choice of fixed or flexible position and direction. 35 UKRA 90 Universal clamp with bracket for anchor bar. Dimensional drawing of the anchor bar. Designation Weight kg/item UKR UKRA UKS 0.8 UKRS UKJ /3 015 ABB cable accessories 7. 4 kv Universal clamps

75 Universal clamps UKR 00, UKRA 00 UKR 00 Use For bundling cables with Ø mm. 55 Design The bracket is made of non-magnetic hot-dip galvanized steel. The band is made of stainless steel SS with rounded edges and has a thickness of 0. mm. The band can be tightened and locked in one operation. The locking bolt is made of die-cast zinc alloy. UKR 00 Universal clamp. 78 UKRS 00 Universal clamp UKR 00 with spacer. 4 UKRF For fixing cables, etc., to cable ladders. For use together with UKR 00. The height of the ladder profile is approx. 16 mm and will fit within the specified dimensions. The bracket is made of hot-dip galvanized steel. 1 UKRF Fixing bracket. 13 UKRS 00 Consists of one UKR 00 and a spacer with a hexagon head wood screw for fastening cables on a wall or a wooden pole. UKRA 00 Use For fixing cables with Ø of mm to the anchor bars. Design The bracket is made of non-magnetic hot-dip galvanized steel. The band is made of stainless steel SS with rounded edges and a thickness of 0. mm. The locking bolt is made of die-cast zinc alloy and can be tightened and locked in one operation. A spring-loaded nut with a reversible locking washer offers a choice of fixed or flexible position and direction. 55 UKRA 00 Universal clamp with bracket for anchor bar. Dimensional drawing of the anchor bar. Designation Weight kg/item UKR UKRA UKRF 0.1 UKRS Universal clamps ABB cable accessories 7. 4 kv 015 4/4

76 Typical applications UKR 00,UKRA 00 Flat configuration L 4 UKR 00 with fixing brackets UKRF. Universal clamp (results of testing with turns of steel band). Max Ø 75 mm UKR 00 with one fixing bracket, UKRF. L [m] max î s = Short circuit current (peak value) C-C = Distance between cable centres L max = Distance between clamps î s [ka] UKR 00 with fixing bracket, UKRF UKRA 00 Trefoil configuration L L [m] max Max Ø 140 mm UKR 00 with two fixing brackets, UKRF. î s [ka] î s = Short circuit current (peak value) D = Outer diameter of cable L max = Distance between clamps UKR 00 with fixing bracket, UKRF 4/5 015 ABB cable accessories 7. 4 kv Universal clamps

77 List of content Alphabetical order List of content Alphabetical order 5/ 5 List of content Alphabetical order ABB cable accessories 7. 4 kv 015 5/1

78 List of content Alphabetical order 5 Designation Page No. Designation Page No. A A-TBF SKR /44 I IA 444 3/3 ADAPTER /10 IH-A 450 /1 APED 1 36 kv /45 IH-A 4400 /3 APIT 1 36 kv /4 IH-A 4630 /6 APSEA 1 36 kv /43 /44 IH-A 4400 /3 ARM /51 IH-A 4630 /6 AV 60 3/7 IK 1105, 1106, 1107, 1108, /4 IK /4 C CSAP-A 1 4 kv /30 IK 1405 IK /4 3/4 CSE-A 1 4 kv, 50 A /19 /1 IK /4 CSE-A 1 4 kv, 400 A /-/3 IK 150 3/4 CSE-A 1 4 kv, 630 A /4-/6 IK 1 3/4 CSEP-A 1 4 kv /7-/9 IK 30 3/5 CU 50 /1 IK 33 3/4 CW /53 IP 50 /1 IP 400 /3 F FBS /7 IP 630 /6 FK /5 J FKFB /5 JP 50 /1 JPB 630 /6 G GAP-APED /46 JPA V JSA 4 6 /6 /49 GB-M0 3/7 JSA /50 GB-M0 S8 3/7 JXT 1 3 /49 H HDC-A 50 A, 1 4 kv /15 /16 HDC-A 630 A, 1 36 kv /17 /18 HU 150 /54 HU 00 /54 HUF /54 HUS /54 I IA /5 IA /5 IA 333 3/3 IA 337 3/3 IA 338 3/3 IA 339 3/3 IA 34 3/3 IA 343 3/3 IA 35 3/3 IA 36 3/3 IA 41 3/3 IA 441 3/3 IA 443 3/3 K KA 50 /16 K-TBF 30 SKR /44 K-TBF 40 SKR /44 KAP 300 U /34 KAP 630 /3 M MA 50 /1 MA-A 630 /6 MBR 50 3/5 Model 1700 Series 3/7 P PC /6 PC L /6 PC 630/50 /1, /6 PG 630 /6 PG-A 630 /6 PIU-APED /46 PSSK /47 5/ 015 ABB cable accessories 7. 4 kv List of content Alphabetical order

79 List of content Alphabetical order Designation Page No. Designation Page No. P PSSK E /47 PSSK L /47 R RKM /6 RKM 1055 K 3/6 RKM /6 RKM 550 3/6 RKM 670 3/6 RKM 67 3/6 RKM-SB 3/6 RKS /6 RULLE 3/3 S 730 R 3/6 SC-B /53 SCL-B /53 SH-SKRM /53 SKALUS 3/5 SMXB /13 /14 SOJ /4 /1 SOT /36 /41 SSH /48 STOP /10 /14 T TB-A 1 /31 THS, THSA /44 TS /10 TSH /48 U UKJ 4/3 UKR 90 4/3 UKR 00 4/4 UKRA 90 4/3 UKRA 00 4/4 UKRF 4/4 UKS 90 4/3 UKRS 90 4/3 UKRS 00 4/4 W WIM /11, /14 5 List of content Alphabetical order ABB cable accessories 7. 4 kv 015 5/3

80 6 5/4 015 ABB cable accessories 7. 4 kv List of content by Category