Separable Connectors and Kits

Size: px
Start display at page:

Download "Separable Connectors and Kits"

Transcription

1 Important Notice While Woer has made every effort to ensure the accuracy of the information in this catalog, Woer does not guarantee that it is errorless. Nor does Woer make any other warranty or guarantee that the information is accurate, reliable or current. Before using our products, you must evaluate them and determine if they are suitable for your intended application. Woer reserves all the rights to make any adjustments to the information contained at any time without notice. Separable Connectors and Kits Woer mansion,north Lanjing Rd,Pingshan,Shenzhen P.R.CHINA Tel: , Fax:

2

3 Separable Connectors Mated with EN50180& A Serial Deadbreak... Apparatus Bushing... Elbow Connector... Straight Connector A Serial Deadbreak... Apparatus Bushing... Tee Connector... Surge Arrester... Patent Tee Connector... Insulated Cap... Separable Connectors Mated with IEEE A Serial Loadbreak... Bushing Insert... Feed-thru Bushing Insert... Bushing Well... Junction... Elbow Connector... Insulated Cap... Surge Arrester A Serial Deadbreak... Bushing/Junction... Tee Connector... Connecting Plug... Reducing Tap Plug... Reducing Tap Plug with Bushing Extender... Insulated Cap Accessories Busbar Connecting System Busbar Connector... 3 Inner Cone Busbar Kits Inner Cone Plug-in Serial up to 4kV Termination Insulated Bushing Insulated Insert Test Report

4 Separable Connectors Mated with EN50180& A Serial Deadbreak Woer produces a range of separable Elbow, Straight and Tee connector kits. Our separable connectors are widely used in switchgears, transformers, cabinets and other electrical equipments. It is made of EPDM or silicone rubber with integrated field control. Woer adopts advanced triple-layer (a conductive inner layer, an insulation layer and a conductive outer layer) injection technique to guarantee the interface property to avoid gaps between layers and decrease partial discharge maximally. Our separable connectors are mainly delivered in 3-phase kit. Each kit contains all the necessary accessories. Woer products have been designed and tested per IEC and other industry standard including: Standard EN Plug-in type bushings above 1kV up to 5kV and from 50A to.5ka for equipment other than liquid filled transformers Elbow Connector EN bushings above 1kV up to 36kV and from 50A to 3.15kA for liquid filled transformers Apparatus Bushing IEC power cable with extruded insulation and their accessories for rated voltages from 1kV(U=1.kV) up to 30kV(U=36kV)-part 4: test requirements on accessories for cable with rated voltages from 6kV up to 30kV(U=36kV) IEC Metal oxide surge arresters without gaps for a.c. systems JB/T 895 Polymer-housed metal oxide surge arresters without gaps for a.c. systems Brief instruction for bushing interface according to EN50180&50181 Straight Connector Typical Components of 50A Deadbreak Separable Insulated Connector System Bushing Interface Voltage Class Interface Standard 50A Series Apparatus Bushing 15kV,4kV 50A Sliding EN50180&50181 Interface type A 630A Series Apparatus Bushing 15kV,4kV 630A Bolted EN50180&50181 Interface type C en.woer.com

5 50A Apparatus Bushing (WETGZ-4/50) 50A Deadbreak Elbow Connector (WEZT 15/50 or WEZT 4/50) Test Point Made of high quality epoxy resin Meeting requirements of EN & EN type A 100% factory tested Voltage class: 4 kv Tested in compliance with GB/T 4109 (IEC ) Made of high quality EPDM rubber, providing a fully screened and submersible separable connection Mating with bushings according to EN & EN type A Built-in capacitive test point to determine the circuit status or install a fault indicator 100% factory tested and compact design Voltage class: 15 kv, 4 kv Cable cross-section: mm Tested in compliance with IEC Voltage Class Continuous Current Bushing Interface Overload Current (8 hrs Max) 4kV 50A EN 50181&50180 type A 65kV for 1min 0kV, 10pC 15kV 300A Voltage Class 15kV 4kV Continuous Current Appliance Bushing Overload Current (8 hrs Max) 50A EN 50181&50180 type A 39kV for 5min 15kV, 10pC 300A 50A EN &50180 type A 54kV for 5min 0kV, 10pC 15kV 300A Note: The bushing interface is identical to the 00A deadbreak interface of IEEE 386 standard. Ordering Information and Designation WEZT /50 1: : Diameter over Insulation /mm 3: Cable Cross- section /mm 4: Material of Lug 5: Kit 15: 8.7/15kV 4: 1/0kV A:Ø17-Ø B:Ø0-Ø5 C:Ø3-Ø8 0:35 03:50 04:70 05:95 06:10 C: Cu A: Al 3: 3pcs/kit 1: 1pc/kit For example: WEZT 15/50A0C3 3 4

6 50A Deadbreak Straight Connector (WEZC 15/50 or WEZC 4/50) 630A Serial Deadbreak Test Point Tee Connector Rated 15kV Rear Connector Rear Connector with Surge Arrester Made of high quality EPDM rubber, providing a fully screened and submersible separable connection Mating with A-type bushings as per EN & EN Built-in capacitive test point allows for an easy check of the circuit status or installation of a fault indicator 100% factory tested,compact design Voltage class: 15 kv, 4 kv Cable cross-section: mm Tested in compliance with IEC Apparatus Bushing Feed-thru Apparatus Bushing Rear Connector with Surge Arrester Voltage Class 15kV 4kV Continuous Current Appliance Bushing Overload Current (8 hrs Max) Cable Cross-section 50A EN 50181&50180 type A 39kV for 5min 15kV, 10pC 300A Ordering Information and Designation WEZC / mm 50A EN &50180 type A 54kV for 5min 0kV, 10pC 15kV 300A 35-10mm Apparatus Bushing With Skirt Apparatus Bushing in Air Tee Connector Rated 4kV Insulated Cap Rear Connector Rear Connector with Surge Arrester Rear Connector with Surge Arrester Typical Components of 630A Deadbreak Separable Insulated Connector System 1: : Diameter over Insulation /mm 3: Cable Cross- section /mm 4: Material of Lug 5: Kit 15: 8.7/15kV 4: 1/0kV A:Ø17-Ø B:Ø0-Ø5 C:Ø3-Ø8 0:35 03:50 04:70 05:95 06:10 C: Cu A: Al 3: 3pcs/kit 1: 1pc/kit For example: WEZC 15/50A04C3 5 6

7 630A Apparatus Bushing 630A Deadbreak Tee Connector ( (WEBⅢ15/630 or WEBKⅢ15/630) Apparatus Bushing Part No. WECTG-DB Tee Connector Rear Connector Rated 15kV Apparatus Bushing With Skirt Part No. WECTG-DS Feed-thru Apparatus Bushing Part No. WECTG-ST Tee Connector Rear Connector Rated 4kV Apparatus Bushing in Air Part No. WECTG-CQ Cable Cross-section Outer Diameter L(mm) Length H(mm) 5~300 (mm ) 71 4±5 400~500 (mm ) 79 7±5 Made of high quality epoxy resin Meeting requirements of EN & EN type C 100% factory tested Voltage class: 15 kv, 4 kv In compliance with GB/T 4109 (IEC ) Voltage Class 15kV 4kV Continuous Current Bushing Interface Overload Current (8 hrs Max) 630A EN & Type C 4kV for 1min 15kV, 10pC 300A 630A Interface EN & Type C 65kV for 1min 0kV, 10pC 15kV 300A Made of high quality EPDM rubber, providing a fully screened and submersible separable connection Mating with C-type bushings and plugs complying with EN & EN Compact design 100% factory tested Voltage class: 15 kv, 4kV Tested in compliance with IEC Voltage Class 15kV 4kV Continuous Current Appliance Bushing at 1.73U 0 Cable Cross-section 630A 150A EN & Type C 39kV for 5min 10pC 5-500mm 630A EN & Type C 54kV for 5min 10pC 15kV 5-400mm 7 8

8 630A Deadbreak Tee Connector (WEBⅢ15/630 or WEBKⅢ15/630) 630A Deadbreak Tee Connector (WEⅢ15/630 or WEKⅢ15/630) Ordering Information and Designation WE /630 1: Characteristic : 3: Diameter over Insulation /mm 4: Cable Cross- section /mm 5: Material of Lug 6: Kit BⅢ: Screened Tee Connector BKⅢ: Screened Rear Connector 15: 8.7/15kV A: Ø14-Ø16 B:Ø16-Ø18 C:Ø17-Ø0 D:Ø0-Ø3 E:Ø3-Ø6 F:Ø6-Ø30 G:Ø30-Ø33 H:Ø33-Ø36 I:Ø36-Ø39 01:5 0:35 03:50 04:70 05:95 06:10 07:150 08:185 09:40 10:300 11:400 1:500 C:Cu A: Al 3: 3pcs/kit 1: 1pc/kit Tee Connector Rear Connector Cable Cross-section Outer Diameter L(mm) Length H(mm) 5~300 (mm ) 71 4±5 400~500 (mm ) 79 7±5 4: 1/0kV A: Ø18-Ø B:Ø-Ø5 C: Ø5-Ø8 D: Ø8-Ø3 E: Ø3-Ø35 F: Ø35-Ø38 G: Ø38-Ø41 01:5 0:35 03:50 04:70 05:95 06:10 07:150 08:185 09:40 10:300 11:400 C:Cu A: Al 3: 3pcs/kit 1: 1pc/kit Made of high quality EPDM rubber Mating with C-type bushings and plugs complying with EN & EN Compact design 100% factory tested Voltage class: 15kV Tested in compliance with IEC For example: WEBⅢ15/630A0C3 Voltage Class Continuous Current Appliance Bushing at 1.73U 0 Cable Cross-section Ordering Information and Designation 15kV 630A 150A EN & Type C 39kV for 5min 10pC 5-500mm WE /630 1: Characteristic : 3: Diameter over Insulation /mm 4: Cable Cross- section /mm 5: Material of Lug 6: Kit Ⅲ: Unscreened Tee Connector KⅢ: Unscreened Rear Connector 15: 8.7/15kV A: Ø14-Ø16 B:Ø16-Ø18 C:Ø17-Ø0 D:Ø0-Ø3 E:Ø3-Ø6 F:Ø6-Ø30 G:Ø30-Ø33 H:Ø33-Ø36 I:Ø36-Ø39 01:5 0:35 03:50 04:70 05:95 06:10 07:150 08:185 09:40 10:300 11:400 1:500 C: Cu A: Al 3: 3pcs/kit 1: 1pc/kit For example: WEⅢ15/630B0C3 9 10

9 Surge Arrester (MOA Rated 15kV) Surge Arrester (MOA Rated 0kV) Fully screened and insulated Protecting electrical components against over-voltage and transients The surge arrester s active part is made of metal oxide The connected braid manages short circuit currents In compliance with IEC , JB/T % factory tested Fully insulated and 100% factory tested Protecting electrical components against over-voltage and transient The surge arrester s active part is made of metal oxide The connected braid manages short circuit currents Tested in compliance with IEC , JB/T 895 System Nominal Voltage(kV) (kv) Continuous Operation Voltage (kv) Steep Current Impulse Residual Voltage (kv) Lightning Impulse Residual Voltage(kV) Switching Impulse Residual Voltage(kV) Long Duration Current Impulse Withstand(A) High Current Impulse Withstand (ka) YH5WZ- 10/ YH5WS- 10/30 YH5WS- 13/ YH5WZ- 17/45 YH5WS- 17/ System Nominal Voltage(kV) Continuous Operation Voltage (kv) Steep Current Impulse Residual Voltage (kv) Lightning Impulse Residual Voltage(kV) Switching Impulse Residual Voltage(kV) Long Duration Current Impulse withstand(a) High Current Impulse Withstand (ka) WEBK YH5WZ-6/ WEBK YH5WZ-3/ WEBK YH5WX-34/ Selection Table Screened Unscreened For Tee Connector For Rear Connector For Tee Connector For Rear Connector WEB YH5WZ-10/7 WEBK YH5WZ-10/7 WE YH5WZ-10/7 WEK YH5WZ-10/7 WEB YH5WS-10/30 WEBK YH5WS-10/30 WE YH5WS-10/30 WEK YH5WS-10/30 Part No. WEB YH5WS-13/36 WEBK YH5WS-13/36 WE YH5WS-13/36 WEK YH5WS-13/36 WEB YH5WZ-17/45 WEBK YH5WZ-17/45 WE YH5WZ-17/45 WEK YH5WZ-17/45 WEB YH5WS-17/50 WEBK YH5WS-17/50 WE YH5WS-17/50 WEK YH5WS-17/

10 630A Deadbreak Tee Connector Rated 35kV(WEB 35/630) 630A Deadbreak Insulated Cap(WJM 15/630 or WJM 4/630) 166 Tee Connector Rear Connector With patented cable adaptor (Zl ) Made of high quality EPDM rubber, providing a fully screened and submersible separable connection Mates with both E-type bushings and plugs complying with EN & EN and IEEE A bushing rated 35kV (different bushing interface determines different package kit ) Compact design 100% factory tested Tested in compliance with IEC Cable cross-section: mm Made of high quality EPDM rubber Used to insulate, shield and seal the deadbreak interfaces of C-type bushings, complying with EN & EN Tested in compliance with IEC % factory tested Bushing Interface: Type E Voltage Class Appliance Bushing at 45kV 35kV 630A EN 50181&50180 Type E IEEE A deadbreak rated 35kV 117kV for 5min 10pC 00kV WJM 15/630 WJM 4/630 15kV 4kV 630A 630A 39kV for 5min 54kV for 5min 15kV, 10pC 0kV, 10pC 15kV Cable Cross-section mm Ordering Information and Designation WEB /630 1: : Diameter over Insulation /mm 3: Cable Cross- section /mm 4: Material of Lug 5: Kit 35: 6/35kV A: Ø30-Ø34 B:Ø33-Ø37 C:Ø36-Ø40 D: Ø40-Ø43 E: Ø4-Ø45 F: Ø45-Ø48 03:50 04:70 05:95 06:10 07:150 08:185 09:40 10:300 11:400 C: Cu A: Al 3: 3pcs/kit 1: 1pc/kit For example: WEB 35/630C04C

11 Separable Connectors Mated with IEEE A Serial Loadbreak Woer produces a range of separable Elbow and Tee connector kits. Our separable connectors are widely used in switchgears, transformers, cabinets and other electrical equipments. It is made of EPDM or silicone rubber with integrated field control. Woer adopts advanced triple-layer (a conductive inner layer, an insulation layer and a conductive outer layer) injection technique to guarantee the interface property to avoid gaps between layers and decrease partial discharge maximally. Our separable connectors are mainly delivered in 3-phase kit. Each kit contains all the necessary accessories. 3-way Junction Energized Indicator Woer products have been designed and tested per IEEE and other industry standard including: -way Specific Junction Elbow Connector Standard Insulated Cap IEEEE 386 Separable insulated connector system for power distribution system above 600V GB 1103 Metal oxide surge arresters without gaps for a.c. systems Feed-thru Bushing Insert JB/T 895 Polymer-housed metal oxide surge arresters without gaps for a.c. systems Bushing Insert Brief instruction for operation interface according to IEEE 386 Elbow Connector With Surge Arrseter Typical components of 00A Loadbreak Separable Insulated Connector System Operation Interface Rated Voltage Interface Standard 00A Series Loadbreak Bushing or Junction 8.3/14.4kV 00A Sliding IEEE 386 Loadbreak 600A Series Deadbreak Bushing or Junction 15./6.3kV 600A Bolted IEEE 386 Deadbreak 16

12 00A Loadbreak Bushing Insert(WADT 15/00) 00A Loadbreak Feed-thru Bushing Insert(WAST 15/00) Providing a fully shielded and submersible connection for mated loadbreak operation Used with loadbreak connectors meeting the requirements of IEEE 386 Compact design Made of high quality EPDM rubber Providing two electrically interconnected bushing interface Providing a fully shielded and submersible connection for mated loadbreak operation Used with loadbreak connectors meeting the requirements of IEEE 386 Compact design Made of high quality EPDM rubber (U /U) 0 Bushing Insert 8.3/14.4kV Switching Current 00A 34kV for 1min 11kV, 3pC 14.4kV,00A,10times (U 0/U) Feed-thru Bushing Insert 8.3/14.4kV 00A 34kV for 1min 11kV, 3pC Switching Current 14.4kV,00A,10times 17 18

13 00A Loadbreak Bushing Well(WATGZ 15/00) 00A Loadbreak Junction Providing a fully shielded and submersible connection for loadbreak connector component, such as bushing insert Used with loadbreak connectors meeting the requirements of IEEE 386 Compact design Made of high quality epoxy resin (U 0/U) Bushing Well 8.3/14.4kV 00A 34kV for 1min 11kV, 3pC Providing a fully shielded and submersible connection for mated loadbreak operation Using with loadbreak connectors meeting the requirements of IEEE 386 Optional number of interface Made of high quality EPDM rubber (U 0/U) Selection Table Result 8.3/14.4kV 00A 34kV for 1min 11kV, 3pC Name Profile Part No. Interface -way Junction WAMP-15/00 Loadbreak Sliding 3-way Junction WAMP3-15/00 Loadbreak Sliding 4-way Junction WAMP4-15/00 Loadbreak Sliding -way Specific Junction WAYMP-15/00 Loadbreak Sliding 19 0

14 00A Loadbreak Elbow Connector(WAZT 15/00 or WAZT 5/00) 00A Loadbreak Elbow Connector(WAZT 15/00 or WAZT 5/00) Ordering Information and Designation WAZT /00 1: : Diameter over Insulation /mm 3: Cable Cross- section /mm 4: Material of Lug 5: Kit Test Point 15: 8.3/14.4kV A:Ø17-Ø0 B:Ø0-Ø3 C: Ø3-Ø6 0: 35 03: 50 04:70 05:95 06:10 C: Cu A: Al 3: 3pcs/kit 1: 1pc/kit Rated 15kV 5: 15./6.3kV A: Ø16-Ø1 B:Ø18-Ø4 C: Ø-Ø8 D: Ø5-Ø3 01: 5 0: 35 03:50 04:70 05:95 06:10 C: Cu A: Al 3: 3pcs/kit 1: 1pc/kit For example: WAZT 15/00B04C3 Test Point Rated 5kV Made of high quality EPDM rubber Fully screened and submersible Built-in capacitive test point 100% factory tested Voltage class: 15kV, 5 kv In compliance with IEEE 386 (U /U) 0 8.3/14.4kV 15./6.3kV Switching Current Cable Cross-section 00A 34kV for 1min 11kV, 3pC 14.4kV, 00A, 10 times 35-10mm 00A 40kV for 1min 19kV, 3pC 15kV 6.3kV, 00A, 10 times 5-10mm 1

15 00A Loadbreak Insulated Cap(WAJM 15/00) 00A Loadbreak Elbow Connector with Surge Arrester Made of high quality EPDM rubber Used to insulate, shield and seal the loadbreak interface of 00A bushings In compliance with IEEE % factory tested Fully screened and insulated Protecting electrical components against over-voltage and transients The surge arrester s active part is made of metal oxide The connected braid to manage short circuit currents In compliance with IEC , JB/T % factory tested Made of high quality EPDM rubber WAJM 15/00 (U 0/U) 8.3/14.4kV 00A 34kV for 1min 11kV, 3pC System Nominal Voltage(kV) Continuous Operation Voltage (kv) Steep Current Impulse Residual Voltage (kv) Lightning Impulse Residual Voltage(kV) Switching Impulse Residual Voltage(kV) Long Duration Current Impulse Withstand(A) High Current Impulse Withstand (ka) WAZT-BLQ-17/45 WAZT-BLQ-17/

16 600A Deadbreak Junction and Integral Bushing 600A Serial Deadbreak Reducing Tap Plug Energized Indicator Providing a fully shielded, submersible, threaded connection for mated deadbreak operation Using with deadbreak connectors meeting the requirements of IEEE 386 Compact design In compliance with IEEE 386 Made of high quality EPDM 3-way Specific Junction Tee Connector Energized Indicator Elbow Connector Integral Bushing with Skirt Insulated Cap Elbow Connector with Surge Arrester (U /U) 0 Result 8.3/14.4kV 600A 3-way Junction Tee-Ⅱ Connector Energized Indicator Elbow Connector Energized Indicator 34kV for 1min 11kV, 3pC Selection Table Reducing Tap Plug with Bushing Extender Elbow Connector with Surge Arrester Typical Components of 600A Deadbreak Separable Insulated Connector System Name -way Junction Profile Part No. Interface WAMP-15/600 Deadbreak Bolted 3-way Junction WAMP3-15/600 Deadbreak Bolted 4-way Junction WAMP4-15/600 Deadbreak Bolted Integral Bushing with Skirt WAYTSG-15/600 Deadbreak Bolted 3-way Specific Junction WAYMP3-15/600 Deadbreak Bolted 5 6

17 600A Deadbreak Tee Connector(WABT 15/600 or WABT 15/600) 600A Deadbreak Connecting Plug(WAZH 15/600/600) Test Point Test Point Tee Connector Tee-Ⅱ Connector Made of high quality EPDM rubber, providing a fully screened and submersible separable connection In complying with IEEE 386 Compact design 100% factory tested Voltage class: 15 kv Providing a fully shielded, submersible, threaded connection for mated deadbreak operation Using with deadbreak connectors meeting the requirements of IEEE 386 Compact design and made of high quality EPDM rubber Providing two in-line bushing interface In compliance with IEEE A Deadbreak Reducing Tap Plug(WAZH 15/600/00) (U /U) 0 Cable Cross-section Ordering Information and Designation Result 8.3/14.4kV 600A 34kV for 1min 11kV, 3pC 5-400mm Providing a fully shielded, submersible, threaded connection for mated deadbreak operation Using with deadbreak connectors meeting the requirements of IEEE 386 Compact design made of high quality EPDM rubber Transition of a 600A deadbreak system to a 00A loadbreak system In compliance with IEEE 386 WA /600 1: Characteristic BT: Tee BT: Tee-Ⅱ : 3: Diameter over Insulation /mm 15: 8.3/14.4kV A:Ø14-Ø16 B:Ø16-Ø18 C:Ø17-Ø0 D:Ø0-Ø3 E:Ø3-Ø6 F:Ø6-Ø30 G:Ø30-Ø33 H:Ø33-Ø36 4: Cable Cross- section /mm 01:5 0:35 03:50 04:70 05:95 06:10 07:150 08:185 09:40 10:300 11:400 5: Material of Lug C: Cu A: Al 6: Kit 3: 3pcs/kit 1: 1pc/kit WAZH-15/600/600 or WAZH-15/600/00 8.3/14.4kV 600A 34kV for 1min 11kV, 3pC For example: WABT 15/600B05C3 7 8

18 600A Deadbreak Reducing Tap Plug with Bushing Extender (WAFZH 15/600/00) 600A Deadbreak Insulated Cap( WAJM 15/600) Extender Providing a fully shielded, submersible, threaded connection for mated deadbreak operation Using with deadbreak components meeting the requirements of IEEE 386 Compact design Transition of a 600A deadbreak system to a 00A loadbreak system, with the 600A interface connecting to a bushing or a junction Made of high quality EPDM rubber Made of high quality EPDM rubber Used to insulate, shield and seal the deadbreak interfaces of 600A bushings per IEEE 386 Compact design Tested in compliance with IEEE % factory tested WAFZH 15/600/00 8.3/14.4kV 600A/00A 34kV for 1min 11kV, 3pC WAJM 15/ /14.4kV 600A 34kV for 1min 11kV, 3pC 9 30

19 Energized Indicator(WDDX) Fault Indicator(EKL) Accessories Install at the test point to indicate the circuit energized status with flicker warning the energized circuit. Moreover, it is fully insulated and sealed with unlimited climate condition. Indicate the circuit status with flicker warning the fault circuit to shorten the fault inspecting time. Busbar Connecting System Busbar Connector Busbar connector system is made of silicone rubber, mainly applied for the connection for SF6 insulated switchgear with metal housing. Such special designed connector can be also made screened or unscreened, which can electrically insulate and mechanically seal the connecting busbar and switchgear. The connecting interface conforms to type C according to EN50180, EN and DIN Following are our unscreened products. Screened products are available according to different requirements. Cable Sheath Voltage Limiter (WBHQ 7/400 or WBHQ 7/600) Use for single-core power cable route to restrict the inducted voltage on the cable metal sheath. It protects the sheath from breakdown by overvoltage. End-adapter with Busbar Part No. ZDMX 10/630-L Cross-adapter with Busbar Part No. ZJMX 10/630-L L: busbar length Busbar Cold Shrink Sealing Kits for Connectors Heat Shrink Sealing Kits for Connectors 3-core 3-core End-adapter Cross-adapter 1-core 1-core 31 3

20 Inner Cone Busbar Kits Inner cone busbar kits are suitable for the combined connection of ring main units to supply more branches for expansion. Meanwhile, it is a prior option to combined ring main units. Inner Cone Plug-in Serial up to 4kV Termination Inner Cone Busbar Insulator 1# Part No. WNML1-TG Inner Cone Busbar Connector 1# Part No. WNML1-15 Inner Cone Busbar Plug 1# Part No. WNMLD1-15 Conforming to EN 50181&50180 Dry interface Premould stress control cone of silicone rubber with 100% factory tested Tested according to IEC 6050 Metal protective shell on tail to provide great mechanical protection and fully shield Adopting one-piece compression structure of tail tube and spring to ensure enough interface force between the stress control cone and bushing Suitable for indoor& outdoor condition mated with C-GIS or transformers Voltage Class Appliance Bushing Busbar Connector and Kits 15kV 630A EN 50181&50180 type C 4kV for 1min 15kV, 10pC 75kV Switch Cabinet Column Connecting Apparatus Inner Cone Bushing Inner Cone Plug-in Termination Cable Application 33 34

21 Designed Profile Selection Table 1 Insulated Bushing 1 Inner Cone Insulated Bushing Flange 6/35kV Main Body 3# # Core Number 1 or or 3 Part No. 35kV WCBN-3-1(3) 50~500 35kV WCBN kV WCBN--1(3) 50~ Inner Cone Plug-in Termination Wedge-shaped Cylinder Premould Stress Cone Tail Tube Supporting Tube Clamp Ring Bite-wire Tool Gasket Non-magnetic Spring Stopper Set Conductive Strip 7.5/4kV 18/30kV 1/0kV 3# 3# # 1# 3# # 1 1 or or 3 1 or 3 1 or or 3 7.5kV WCBN ~500 30kV WCBN-3-1(3) 35~500 30kV WCBN ~800 30kV WCBN--1(3) 70~40 30kV WCBN-1-1(3) 35~40 0kV WCBN-3-1(3) 35~500 0kV WCBN ~800 0kV WCBN--1(3) 150~ # 1 or 3 0kV WCBN-1-1(3) 35~400 6/10, 8.7/10 or 8.7/15kV 3# # 1 or or 3 10kV WCBN-3-1(3) 35~500 10kV WCBN ~ kV WCBN--1(3) 40~500 1# 1 or 3 10kV WCBN-1-1(3) 5~400 1# Main Body # 3# A Maximum System Voltage(U ) m kv Hz for 5min (kv) U 0 5pC 5pC 5pC 1./50μs(kV) Installation 1sec(kA)

22 Insulated Bushing Conforming to EN 50181&50180 Connecting to high voltage conductor of C-GIS cabinets or transformers Compact design, fully insulated and no maintenance Maximum System Voltag(U m) A kv 50Hz for 5min (kv) 1.73U 0 1./50μs(kV) WNJT pC 170 Part No. WNJT pC 00 WNJT pC 00 Maximum Short-time Current Withstand 1sec(kA) WNJT-1 WNJT- WNJT-3 Rated Impulse Current ka Insulated Insert Conforming to EN &50180 To seal and insulate inner cone insulated bushing used for spare outlet port Referred Dimension Outline Conductor Installation L1(mm) L(mm) ΦD(mm) Installation Position for Bushing Φ1(mm) Number of Installation Hole n(pcs) Installation Position for Termination Φ(mm) Number of Installation Hole N(pcs) Part No. WNJT-1 WNJT WNJT WMT-1 Maximum System Voltage(U m) WMT- kv 50Hz for 5min(kV) 1.73U 0 WMT pC WMT-3 Part No. WMT- WMT pC 5pC 1./50μs(kV)

23 Test Report 39 40

24 41 4

power cable accessories

power cable accessories power cable accessories kv up to 4 kv Completing the picture based on experience is the future nkt cables GmbH NKT was established in 89 as cable manufacturer. In 999 NKT A/S Denmark merged with Felten

More information

INTRODUCTION. The plug-in connection on the cables and lightning arrestors, allows for easy installation and replacement.

INTRODUCTION. The plug-in connection on the cables and lightning arrestors, allows for easy installation and replacement. INTRODUCTION The Power Systems 44 kv MiniSub TM is the most compact system at this voltage available. Utilizing a deadfront termination and lightning arrestor setup, it eliminates the line top or side

More information

ACCESSORIES FOR LPOF, HPPT AND XLPE HIGH VOLTAGE CABLE SYSTEMS PRODUCT CATALOGUE

ACCESSORIES FOR LPOF, HPPT AND XLPE HIGH VOLTAGE CABLE SYSTEMS PRODUCT CATALOGUE ACCESSORIES FOR LPOF, HPPT AND XLPE HIGH VOLTAGE CABLE SYSTEMS PRODUCT CATALOGUE hvgrid-tech designs and manufactures high voltage cable accessories for all types of cable systems, ranging from 69 kv to

More information

INTERFACE E - 5/8" MEDIUM VOLTAGE SEPARABLE CONNECTORS AND BUSHINGS CATALOGUE 2017

INTERFACE E - 5/8 MEDIUM VOLTAGE SEPARABLE CONNECTORS AND BUSHINGS CATALOGUE 2017 INTERFACE E - 5/8" MEDIUM VOLTAGE SEPARABLE CONNECTORS AND BUSHINGS CATALOGUE 2017 NEXANS NETWORK SOLUTIONS DIV. EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer,

More information

3M Electrical Markets Division Loadbreaks Deadbreaks Junctions Surge Arresters Disconnectable Joints 3 3M is the exclusive distributor for Richards Medium Voltage cable accessories in Canada. www.richards-mfg.com

More information

CABLE SYSTEMS. Accessories and Systems for Medium and High-Voltage Cables up to 300 kv.

CABLE SYSTEMS. Accessories and Systems for Medium and High-Voltage Cables up to 300 kv. MV-CONNEX, HV-CONNEX, IXOSIL Terminations, IXOSIL MSA Slip-on Joint Boxes CABLE SYSTEMS Accessories and Systems for Medium and High-Voltage Cables up to 300 kv. Welcome to the CABLE SYSTEMS Centre of Competence.

More information

ELASTIMOLD UNDERGROUND CABLE ACCESSORIES

ELASTIMOLD UNDERGROUND CABLE ACCESSORIES ELASTIMOLD UNDERGROUND CABLE ACCESSORIES ELASTIMOLD FEATURES AND BENEFITS The Elastimold brand is recognised as the leading producer of premoulded cable accessory components worldwide. Utilising specially

More information

Resin Impregnated Paper Bushing, Oil to SF 6. , Type GSBK

Resin Impregnated Paper Bushing, Oil to SF 6. , Type GSBK 1ZSC563-AAA en, Rev. 2 Resin Impregnated Paper Bushing, Oil to SF 6, Type GSBK Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers,

More information

600 A 35 kv class BT-TAP deadbreak connector

600 A 35 kv class BT-TAP deadbreak connector Supersedes 600-55 July 2014 600 A 35 kv class BT-TAP deadbreak connector General Eaton's Cooper Power Systems 600 A 35 kv Class BT-TAP deadbreak connector is used to terminate high-voltage underground

More information

1ZSC AAA en, Rev. 6. Resin impregnated paper bushing, oil to SF 6., type GSBK Technical guide

1ZSC AAA en, Rev. 6. Resin impregnated paper bushing, oil to SF 6., type GSBK Technical guide 1ZSC563-AAA en, Rev. 6 Resin impregnated paper bushing, oil to SF 6, type GSBK Technical guide Original instruction The information provided in this document is intended to be general and does not cover

More information

Deadbreak Apparatus. connectors. 600 A 15/25 kv Class GENERAL

Deadbreak Apparatus. connectors. 600 A 15/25 kv Class GENERAL Deadbreak Apparatus Connectors 600 A 15/25 kv Class BOL-T Deadbreak Connector Electrical Apparatus 600-30 GENERAL The Cooper Power Systems 600 A, 15/25 kv Class BOL-T Deadbreak Connector is used to terminate

More information

600 A 25 kv class BT-TAP deadbreak connector

600 A 25 kv class BT-TAP deadbreak connector Deadbreak Connectors Catalog Data CA650001EN Supersedes January 2015 600 A 25 kv class BT-TAP deadbreak connector COOPER POWER SERIES General Eaton terminates high-voltage underground cable to transformers,

More information

INSTALLATION PRODUCTION TESTS

INSTALLATION PRODUCTION TESTS Deadbreak Apparatus Connectors 600 A 15/25 kv Class Bol-T Deadbreak Connector Electrical Apparatus 600-10 GENERAL The Cooper Power Systems 600 A, 15/25 kv Class Bol-T Deadbreak Connector is used to terminate

More information

600 A 15 kv class T-OP II deadbreak connector

600 A 15 kv class T-OP II deadbreak connector Deadbreak Apparatus Connectors CA650017EN Supersedes 600-12 February 2010 COOPER POWER SERIES 600 A 15 kv class T-OP II deadbreak connector General Eaton terminates high-voltage underground cable to transformers,

More information

Loadbreak Elbows. 3 Loadbreak Elbows. 200 Amp 5-15 kv Industrial pg Loadbreak Elbows. 200 Amp 25 kv Industrial pg. 254.

Loadbreak Elbows. 3 Loadbreak Elbows. 200 Amp 5-15 kv Industrial pg Loadbreak Elbows. 200 Amp 25 kv Industrial pg. 254. 3 Loadbreak Elbows 200 Amp 5-15 kv Industrial pg. 252 Loadbreak Elbows 200 Amp 25 kv Industrial pg. 254 Loadbreak Elbows 200 Amp Industrial pg. 255 Loadbreak Elbows Accessories 3 Loadbreak Elbows 3M 200

More information

1ZSE EN, REV. 7. Oil SF 6. bushings type GOEK Technical guide

1ZSE EN, REV. 7. Oil SF 6. bushings type GOEK Technical guide 1ZSE 2750-106 EN, REV. 7 Oil SF 6 bushings type GOEK Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.

More information

a Nexans company Medium voltage symmetrical separable connectors - Interface C -

a Nexans company Medium voltage symmetrical separable connectors - Interface C - a Nexans company Medium voltage symmetrical separable connectors - Interface C - Catalogue 2011 Nexans Network Solutions Div. Euromold COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised

More information

1ZSC AAA EN, REV. 7. Transformer bushings type GSBK Technical guide

1ZSC AAA EN, REV. 7. Transformer bushings type GSBK Technical guide 1ZSC563-AAA EN, REV. 7 Transformer bushings type GSBK Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.

More information

THORNE & DERRICK UK TEL FAX TEL FAX

THORNE & DERRICK UK TEL FAX TEL FAX a Nexans company Catalogue 2006 EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for medium

More information

a Nexans company Catalogue 2009

a Nexans company Catalogue 2009 a Nexans company Catalogue 2009 EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for medium

More information

SF6 GAS INSULATED METAL ENCLOSED SWITCHGEAR (GIS)

SF6 GAS INSULATED METAL ENCLOSED SWITCHGEAR (GIS) SF6 GAS INSULATED METAL ENCLOSED SWITCHGEAR (GIS) About company The «Elektroapparat» plant starts its operation in 1922 as a plant manufacturing high-voltage electrical equipment. During the first two

More information

600 A 28 kv class Cleer loadbreak connector system

600 A 28 kv class Cleer loadbreak connector system Loadbreak/Deadbreak Connectors CA650012EN Supersedes 600-102 April 2013 COOPER POWER SERIES 600 A 28 kv class Cleer loadbreak connector system General Eaton's Cooper Power series Cleer loadbreak connector

More information

600 A 15 kv class Cleer loadbreak connector system

600 A 15 kv class Cleer loadbreak connector system Loadbreak/Deadbreak Connectors CA650010EN Supersedes 600-100 April 2013 COOPER POWER SERIES 600 A 15 kv class Cleer loadbreak connector system General Eaton's Cooper Power series Cleer loadbreak connector

More information

IEC Separable Connectors 36 kv and 42 kv, 630A and 1250A Front T-Body / Coupling (Rear) T-Body Connector

IEC Separable Connectors 36 kv and 42 kv, 630A and 1250A Front T-Body / Coupling (Rear) T-Body Connector www.chardongroup.com IEC Separable Connectors 36 kv and 42 kv, 630A and 1250A Front T-Body / Coupling (Rear) T-Body Connector Application Chardon Front T-Body / Coupling (Rear) T-Body connectors are fully

More information

3 Cold Shrink Silicone Rubber Skirted Termination Kit QT-III 7672-S-8 Series

3 Cold Shrink Silicone Rubber Skirted Termination Kit QT-III 7672-S-8 Series 3 Cold Shrink Silicone Rubber Skirted Termination Kit QT-III 7672-S-8 Series Data Sheet 1. Product Description 3M Cold Shrink Termination Kit QT-III 7672-S-8 Series contains one silicone rubber termination

More information

a Nexans company Catalogue 2007

a Nexans company Catalogue 2007 a Nexans company Catalogue 2007 EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for medium

More information

TE S RAYCHEM RSTI-CC-58 SCREENED, SEPARABLE COUPLING SYSTEM

TE S RAYCHEM RSTI-CC-58 SCREENED, SEPARABLE COUPLING SYSTEM Industry photo: should be a the same image as larger industry photo. Either a different crop or different angle. industry photo. This image and the one above should be different versions of the same photo

More information

Nexans Network Solutions Div. Euromold

Nexans Network Solutions Div. Euromold a Nexans company Catalogue 2011 Nexans Network Solutions Div. Euromold COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated

More information

Tests are conducted in accordance with IEEE Standard 386. ac 60 Hz 1 Minute Withstand 50

Tests are conducted in accordance with IEEE Standard 386. ac 60 Hz 1 Minute Withstand 50 Deadbreak Apparatus Connectors 600 A 35 kv Class Bol-T Deadbreak Connector Electrical Apparatus 600-50 General The Cooper Power Systems 600 A, 35 kv Class Bol-T Deadbreak Connector is used to terminate

More information

1ZSE en, Rev. 7. Transformer bushings, type GOB Technical guide

1ZSE en, Rev. 7. Transformer bushings, type GOB Technical guide 1ZSE 2750-102 en, Rev. 7 Transformer bushings, type GOB Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers, access to all the technical

More information

a Nexans company Catalogue 2008

a Nexans company Catalogue 2008 a Nexans company Catalogue 008 EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for medium voltage

More information

Completing the picture

Completing the picture HIGH VoltaGe cable accessories for 72 kv up to 170 kv Completing the picture based on experience is the future nkt cables GmbH nkt was established in 1891 as cable manufacturer. in 1999 nkt a/s denmark

More information

a Nexans company Catalogue 2009

a Nexans company Catalogue 2009 a Nexans company Catalogue 2009 EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for medium

More information

1ZSE en, Rev. 3. Wall bushings, type GSA-AA Technical guide

1ZSE en, Rev. 3. Wall bushings, type GSA-AA Technical guide 1ZSE 2750-112 en, Rev. 3 Wall bushings, type GSA-AA Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.

More information

1ZSE EN, REV. 4. Wall bushings type GSA-AA Technical guide

1ZSE EN, REV. 4. Wall bushings type GSA-AA Technical guide 1ZSE 2750-112 EN, REV. 4 Wall bushings type GSA-AA Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.

More information

a Nexans company Catalogue 2009

a Nexans company Catalogue 2009 a Nexans company Catalogue 009 EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for medium voltage

More information

B kv Gas-insulated Substations

B kv Gas-insulated Substations 72.5 145 kv Gas-insulated Substations The increasing demand for electrical power in cities and industrial centres requires the installation of a compact and efficient distribution and transmission network.

More information

IEC Separable Connectors 17.5 kv/24 kv, 630A

IEC Separable Connectors 17.5 kv/24 kv, 630A IEC Separable Connectors 17.5 kv/24 kv, 630A Front T-Body / Coupling (Rear) T-Body Connector Application The Chardon T-Body connectors are used to terminate polymeric cable to dead front apparatus such

More information

your Green Power WIND POWER SOLUTIONS only Greener

your Green Power WIND POWER SOLUTIONS only Greener your Green Power WIND POWER SOLUTIONS only Greener WIND POWER SOLUTIONS Thomas & Betts is committed to being your partner in power delivery by leading the industry in innovative wind power solutions and

More information

High Voltage Accessories up to 72.5 kv

High Voltage Accessories up to 72.5 kv High Voltage Accessories up to 72.5 kv Technical instructions and application information The data given were determined diligently, but do not release our customers of the duty to carry out tests themselves

More information

Resin Impregnated Paper Bushing, Oil to Air, Type GSB Technical guide

Resin Impregnated Paper Bushing, Oil to Air, Type GSB Technical guide 1ZSC000563-AAC en, Rev. 2 Resin Impregnated Paper Bushing, Oil to Air, Type GSB Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers,

More information

600A Deadbreak Elbow. K656LR Elbow Connector (with Test Point) Features:

600A Deadbreak Elbow. K656LR Elbow Connector (with Test Point) Features: Issue Date: 07/17/2017 Page: 1 of 5 PSS- K656LR Elbow Connector (with Test ) Applications: The Elastimold K656LR (with test point) is designed to provide fully shielded, dead-front submersible cable connections

More information

Transformer High Current Bushings Type CFPT & CFCT 36kV up to 40kA IEC

Transformer High Current Bushings Type CFPT & CFCT 36kV up to 40kA IEC Transformer High Current Bushings Type CFPT & CFCT 36kV up to 40kA IEC 60137-2008 High current bushings for transformer Features Bushing Type CFPT version Porcelain Insulator Trench RIG technology for

More information

INTERFACE C MEDIUM VOLTAGE SYMMETRICAL SEPARABLE CONNECTORS CATALOGUE 2017

INTERFACE C MEDIUM VOLTAGE SYMMETRICAL SEPARABLE CONNECTORS CATALOGUE 2017 INTERFACE C MEDIUM VOLTAGE SYMMETRICAL SEPARABLE CONNECTORS CATALOGUE 2017 NEXANS NETWORK SOLUTIONS DIV. EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer

More information

GROUP D. Switch & Protective device.

GROUP D. Switch & Protective device. GROUP D Switch & Protective device PYUNGIL Bldg., 147-10, Gwanyang 2-dong, Dongan-gu, Anyang-si, Gyeonggi-do, 431-808, Korea Tel : 82-31-420-0~3 FAX : 82-31-424-7300 www.pyungil.com Pole-mounted SF Insulated

More information

1ZSE en, Rev. 9. Transformer bushings, type GOB Technical guide

1ZSE en, Rev. 9. Transformer bushings, type GOB Technical guide 1ZSE 2750-102 en, Rev. 9 Transformer bushings, type GOB Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.

More information

a Nexans company Catalogue 2015

a Nexans company Catalogue 2015 a Nexans company Catalogue 05 Nexans Network Solutions Div. Euromold COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated

More information

Nexans Network Solutions Div. Euromold

Nexans Network Solutions Div. Euromold Catalogue 0 Nexans Network Solutions Div. Euromold COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for

More information

Product Description: Objective and Certification: Test Samples and Test Cable:

Product Description: Objective and Certification: Test Samples and Test Cable: Product Description: The CableMate 2LBE loadbreak elbow connector and 2LBI loadbreak bushing insert are fully-shielded, fully submersible, insulated plug-in terminations for connecting underground cables

More information

Loadbreak Apparatus Connectors

Loadbreak Apparatus Connectors Loadbreak Apparatus Connectors 200 A 25 kv Class POSI-BREAK Loadbreak Elbow Connector with Optional Integral Jacket Seal* Electrical Apparatus 500-29-7 general The POSI-BREAK Loadbreak Elbow Connector

More information

Shielded surge arresters

Shielded surge arresters Shielded surge arresters Nexans, worldwide leader for the cable industry Total sales of billion euros in 2009 The most complete range of cables and cabling systems Plants in 39 countries 22,700 employees

More information

3M Cold Shrink QT-III Silicone Rubber Termination Kits 7640-T and 7650-T Series 5, 8, 15, 25/28 and 35 kv

3M Cold Shrink QT-III Silicone Rubber Termination Kits 7640-T and 7650-T Series 5, 8, 15, 25/28 and 35 kv 3M Cold Shrink QT-III Silicone Rubber Termination Kits 7640-T and 7650-T Series 5, 8, 15, 25/28 and 35 kv Data Sheet September 2014 Description 3M Cold Shrink QT-III Silicone Rubber Termination Kits, 7640-T

More information

INTERFACE A MEDIUM VOLTAGE SEPARABLE CONNECTORS AND BUSHINGS CATALOGUE 2017

INTERFACE A MEDIUM VOLTAGE SEPARABLE CONNECTORS AND BUSHINGS CATALOGUE 2017 INTERFACE A MEDIUM VOLTAGE SEPARABLE CONNECTORS AND BUSHINGS CATALOGUE 07 NEXANS NETWORK SOLUTIONS DIV. EUROMOLD COMPANY PRESENTATION EUROMOLD Nexans is the leading European specialised designer, manufacturer

More information

OIP Transformer Outdoor Bushings Type COT(C) 125 COT (C) kV to 550kV up to 5000A IEC

OIP Transformer Outdoor Bushings Type COT(C) 125 COT (C) kV to 550kV up to 5000A IEC OIP Transformer Outdoor Bushings Type COT(C) 125 COT (C) 1800 24kV to 550kV up to 5000A IEC 60137-2008 Features If you need any transformer bushing proven in operation conditions around the world, Trench

More information

power pazifik Metal Oxide Surge Arrester with composite polymer insulator Type series SBK-I to IV /10.3

power pazifik Metal Oxide Surge Arrester with composite polymer insulator Type series SBK-I to IV /10.3 Manufactured by: Metal Oxide Surge Arrester with composite polymer insulator Type series SBK-I to IV-6... 150/10.3 BT-A3/8 Surge Arresters housed in polymer housing, developed to protect switchgear, over

More information

Loadbreak Apparatus Connectors. 200 A 15 kv Class Loadbreak Elbow Connector with Optional Integral Jacket Seal GENERAL

Loadbreak Apparatus Connectors. 200 A 15 kv Class Loadbreak Elbow Connector with Optional Integral Jacket Seal GENERAL Loadbreak Apparatus Connectors 200 A 15 kv Class Loadbreak Elbow Connector with Optional Integral Jacket Seal Electrical Apparatus 500-10-7 GENERAL The Cooper Power Systems Loadbreak Elbow Connector is

More information

Medium Voltage. Joints & Terminations

Medium Voltage. Joints & Terminations 57 - Cold Shrink Joints Supporting Core Radially shrinkable elastomeric splice Semi-conductive layer High permitivity insulation layer 6.6/11/(12) kv 3M QS1000 is a one-piece cold shrink joint body manufactured

More information

Power cable accessories catalogue

Power cable accessories catalogue Power cable accessories catalogue MV Terminations & MV Joints Excellence in Training Obtain an accreditation in a wide range of joints and terminations. Courses available in low voltage, medium voltage

More information

THORNE & DERRICK UK TEL FAX TEL FAX

THORNE & DERRICK UK TEL FAX TEL FAX WWW.CABLEJOINTS.CO.UK THORNE & DERRICK UK TEL 0044 191 490 1547 FAX 0044 477 5371 TEL 0044 117 977 4647 FAX 0044 977 5582 WWW.THORNEANDDERRICK.CO.UK a Nexans company Catalogue 2006 EUROMOLD COMPANY PRESENTATION

More information

3M Cold Shrink 1/C Transition Splice Kit QS-III, 5510A-1T-PILC Series

3M Cold Shrink 1/C Transition Splice Kit QS-III, 5510A-1T-PILC Series 3M Cold Shrink 1/C Transition Splice Kit QS-III, 5510A-1T-PILC Series Data Sheet March 2011 Description 3M Cold Shrink 1/C Transition Splice Kits QS-III, 5510A-1T-PILC Series (which includes 5513A-1T-PILC,

More information

Edison modular fuse, vault application products

Edison modular fuse, vault application products Fusing Equipment Catalog Data CA132025EN Supersedes 240-92 October 2008 Edison modular fuse, vault application products COOPER POWER SERIES Description Eaton s Cooper Power series Edison modular fuses

More information

Bushings for High Voltage AC Applications

Bushings for High Voltage AC Applications Bushings for High Voltage AC Applications Selection guide 1ZSE 2750-100 en, Rev. 3, 2006-03-15 During selection of for high voltage applications several important factors have to be considered to ensure

More information

16kA Solid Dielectric, Triple Option Reclosers Catalog VLT12

16kA Solid Dielectric, Triple Option Reclosers Catalog VLT12 16kA Solid Dielectric, Triple Option Reclosers Providing electronic overcurrent protection for single or three phase operation on systems rated through 27kV, 630A continuous current, 16kA symmetrical interrupting

More information

600 A 15 and 25 kv class deadbreak accessories, tools, and replacement parts

600 A 15 and 25 kv class deadbreak accessories, tools, and replacement parts Deadbreak Connectors Catalog Data CA650007EN Supersedes March 2015 COOPER POWER SERIES 600 A 15 and 25 kv class deadbreak accessories, tools, and replacement parts General Eaton connects and assembles

More information

Modular Substation Technical Data. Modular Substation. Technical Data TGOOD

Modular Substation Technical Data. Modular Substation. Technical Data TGOOD Modular Substation Technical Data TGOOD 2017.2 1 Contents: Part 1: Common characteristics Part 2: HV Gas Insulated Switchgear (GIS) Technical Data Part 3: 110kV Neutral Point Complete Equipment for Service

More information

AMPLETEK Cable accessories - Medium Voltage

AMPLETEK Cable accessories - Medium Voltage Company Brief Introduction Guangdong AMPLE Technology Co.,Ltd., is a large-scare manufacturer with the integration of research, production and marketing of M.V.& H.V. cable accessories. The company mainly

More information

a Nexans company Catalogue 2007

a Nexans company Catalogue 2007 a Nexans company Catalogue 2007 EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for medium

More information

Technical Guarantees For Electrical Materials & Equipments 1 Technical Guarantees No. IDT_1600 22/0.4 KV Low Losses, 3 phase, Indoor Distribution Transformer 1600 KVA Rating No Description Unit Requirements

More information

HIGH VOLTAGE SURGE ARRESTER SPECIFICATION

HIGH VOLTAGE SURGE ARRESTER SPECIFICATION HIGH VOLTAGE SURGE ARRESTER SPECIFICATION Applications: (Polymer housed MOA for 110kv) (The polymer housed MOA for 10kv) (Porcelain housed MOA for 220kv) (35kv MOA without gaps for middle phase) (110kv

More information

PRODUCT BROCHURE. Elastimold ComboT integral separable connectors

PRODUCT BROCHURE. Elastimold ComboT integral separable connectors PRODUCT BROCHURE Elastimold ComboT integral separable connectors 2 ELASTIMOLD COMBOT INTEGRAL SEPARABLE CONNECTORS One of the shortest stack heights in the industry works in smaller cabinets and installs

More information

Air-insulated switchgear UniGear type ZS1

Air-insulated switchgear UniGear type ZS1 Air-insulated switchgear UniGear type ZS1 ABB Power Technologies / 1-7074 D 12-03-2003 - Air-insulated switchgear UniGear type ZS1 ABB Power Technologies / 2-7075 D 1 2-03-2003 - Rated voltage kv 12 17.5

More information

Transformer bushings, type GOH. Technical guide

Transformer bushings, type GOH. Technical guide Transformer bushings, type GOH Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers, access to all the technical information required

More information

11kV Compact Switchgear. tec - range. Minimum to Zero SF6 Insulation Gas. Outec Controls

11kV Compact Switchgear. tec - range. Minimum to Zero SF6 Insulation Gas. Outec Controls 11kV Compact Switchgear tec - range Minimum to Zero SF6 Insulation Gas. Outec Controls 1 tec xx - 11kV Switchgear Contents 1 tec CB - SF6 Free Switchgear... 3 1.1 Description:... 3 1.2 1.3 Features the

More information

Nexans Network Solutions Div. Euromold

Nexans Network Solutions Div. Euromold a Nexans company Catalogue 2011 Nexans Network Solutions Div. Euromold COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated

More information

DM Condenser bushings, kV DURESCA

DM Condenser bushings, kV DURESCA DM Condenser bushings, 36 DURESCA Through wall bushings for indoor and outdoor applications, Resin Impregnated Paper IEC 601378 and IEEE C57.19.01.004 DURESCA Wall bushings Swiss quality combined with

More information

OIP Transformer Outdoor Bushings Type COT(C) 125 COT (C) kV to 550kV up to 5000A IEC

OIP Transformer Outdoor Bushings Type COT(C) 125 COT (C) kV to 550kV up to 5000A IEC OIP Transformer Outdoor Bushings Type COT(C) 125 COT (C) 1800 24kV to 550kV up to 5000A IEC 60137-2008 Features If you need any transformer bushing proven in operation conditions around the world, Trench

More information

Solid Dielectric, Triple Option Reclosers Catalog O-vlt14

Solid Dielectric, Triple Option Reclosers Catalog O-vlt14 Solid Dielectric, Triple Option Reclosers Providing electronic overcurrent protection for single or three phase operation on systems rated through 27kV, 630A or 800A continuous current, 12.5 or 16kA symmetrical

More information

Nexans Network Solutions Div. Euromold

Nexans Network Solutions Div. Euromold Catalogue 2012 Nexans Network Solutions Div. Euromold COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories

More information

Solid Dielectric, Single Phase Recloser

Solid Dielectric, Single Phase Recloser Solid Dielectric, Single Phase Recloser Catalog O-vsp17 Viper-SP Viper-SP solid dielectric, single phase recloser combines the time-proven reliability of electronically controlled, vacuum fault interrupters

More information

Guide Specification. Three-Phase Solid Dielectric Trident-SR with SafeVu Integral Visible Break

Guide Specification. Three-Phase Solid Dielectric Trident-SR with SafeVu Integral Visible Break Part 1-GENERAL 1.1 DESCRIPTION Guide Specification Three-Phase Solid Dielectric Trident-SR with SafeVu Integral Visible Break The switchgear shall consist of magnetically actuated solid dielectric insulated

More information

Cellplux Plug-in Technology

Cellplux Plug-in Technology simple, secure, quick to assemble solution for entire cross-section range only standard tool required unlimited shelf life type tested to CENELEC HD 629.1 D827 SAP-No. 206884 0313 Perfect connection Profit

More information

NXPLUS C Single busbar. Maintenance-free for lifetime

NXPLUS C Single busbar. Maintenance-free for lifetime NXPLUS C Single busbar Maintenance-free for lifetime Energy Distribution Welcome! Page 2 Content Overview Technical data Typicals Panel design Circuit-Breaker panel Busbar Operation Metering Low-voltage

More information

200 A 25 and 28 kv class POSI-BREAK loadbreak elbow connector with optional integral jacket seal-canadian Edition

200 A 25 and 28 kv class POSI-BREAK loadbreak elbow connector with optional integral jacket seal-canadian Edition Loadbreak Connectors CA650101EN Supersedes 500-29-7C November 2011 COOPER POWER SERIES 200 A 25 and 28 kv class POSI-BREAK loadbreak elbow connector with optional integral jacket seal-canadian Edition

More information

Molded Current-Limiting Fuse

Molded Current-Limiting Fuse Molded Current-Limiting provide fullrange fault current protection using specially designed fuse elements, rated through 23kV line to ground and 50kA interrupting current. Construction is modular with

More information

200 A 25 kv and 28 kv class loadbreak elbow connector with optional integral jacket seal-canadian Edition

200 A 25 kv and 28 kv class loadbreak elbow connector with optional integral jacket seal-canadian Edition Loadbreak Connector CA650099EN Supersedes 500-28-7C November 2011 COOPER POWER SERIES 200 A 25 kv and 28 kv class loadbreak elbow connector with optional integral jacket seal-canadian Edition General Eaton

More information

Solid Dielectric, Triple Option Reclosers Catalog O-vlt14

Solid Dielectric, Triple Option Reclosers Catalog O-vlt14 Solid Dielectric, Triple Option Reclosers Providing electronic overcurrent protection for single or three phase operation on systems rated through 27kV, 630A or 800A continuous current, 12.5 or 16kA symmetrical

More information

THP145 HYBRID GAS INSULATED SWITCHGEAR (HGIS) Energy, Fast! tgood.com

THP145 HYBRID GAS INSULATED SWITCHGEAR (HGIS) Energy, Fast! tgood.com THP145 HYBRID GAS INSULATED SWITCHGEAR (HGIS) Energy, Fast! tgood.com TGOOD produces over 5000 switchgear units annually for projects around the globe SOLUTION OVERVIEW For use in affordable air insulated

More information

Elastimold & Hi-Tech Fuse Products

Elastimold & Hi-Tech Fuse Products In this section... Elastimold & Hi-Tech Fuse Products Elastimold & Hi-Tech Fuse Products Overview...H-62 Elastimold Fused Loadbreak Elbows (FLE)... H-63 H-67 Elastimold Molded Current-Limiting Fuses (MCLF)...

More information

200 A 15 kv class loadbreak elbow connector with optional integral jacket seal

200 A 15 kv class loadbreak elbow connector with optional integral jacket seal Loadbreak Connectors Catalog Data CA650062EN Supersedes June 2015 COOPER POWER SERIES 200 A 15 kv class loadbreak elbow connector with optional integral jacket seal General Eaton s Cooper Power series

More information

CGMCOSMOS. Reliable innovation. Personal solutions. Fully gas insulated modular and compact (RMU)system.

CGMCOSMOS. Reliable innovation. Personal solutions. Fully gas insulated modular and compact (RMU)system. MV Switchgear for CGMCOSMOS Fully gas insulated modular and compact (RMU)system Up to 24 kv Up to 27 kv mediumvoltage mediumvoltageag AG Langackerstrasse Langackerstrasse 25 25 CH CH 6330 6330 Cham Cham

More information

a Nexans company Catalogue 2015

a Nexans company Catalogue 2015 a Nexans company Catalogue 2015 Nexans Network Solutions Div. Euromold COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated

More information

Joined Forces Extensive product portfolio and technologies. Cable Accessories from 1 kv to 550 kv. nkt.com

Joined Forces Extensive product portfolio and technologies. Cable Accessories from 1 kv to 550 kv. nkt.com Joined Forces Extensive product portfolio and technologies Cable Accessories from kv to 550 kv nkt.com NKT manufacturing and testing equipment ensures high quality products. Concentrated Competence With

More information

15kV 200A Loadbreak Fuse Elbow Design Test Report. Report Number:

15kV 200A Loadbreak Fuse Elbow Design Test Report. Report Number: 15kV 200A Loadbreak Fuse Elbow Design Test Report Report Number: Date: RN-R2601 9/3/2015 Table of Contents 1. Partial Discharge Test Fuse Elbow... 2 2. AC Withstand Voltage Test - Fuse Elbow... 3 3. DC

More information

200 A 15 kv class loadbreak elbow connector with optional integral jacket seal-canadian Edition

200 A 15 kv class loadbreak elbow connector with optional integral jacket seal-canadian Edition Loadbreak Connectors Catalog Data CA650063EN Supersedes 500-10-7C November 2011 COOPER POWER SERIES 200 A 15 kv class loadbreak elbow connector with optional integral jacket seal-canadian Edition General

More information

Solid Dielectric, Single Phase Reclosers

Solid Dielectric, Single Phase Reclosers Solid Dielectric, Single Phase Reclosers Providing electronic overcurrent protection for single phase operation on systems rated through 38kV, 800A continuous current,12.5ka symmetrical interrupting Reliable

More information

High Voltage and Extra High Voltage Cables

High Voltage and Extra High Voltage Cables High Voltage and Extra High Voltage Cables GUIDE TO THE SELECTION OF EHV AND HV CABLES EHV and HV cables are specially designed on the basis of the project data. To determine appropriate design of a high

More information

H e a t s h r i n k P r o d u c t G u i d e

H e a t s h r i n k P r o d u c t G u i d e P o w e r P r o d u c t s H e a t s h r i n k P r o d u c t G u i d e Introduction HellermannTyton is a world leader in providing systems and solutions for heatshrink applications. HellermannTyton utilises

More information

25kV 200A Loadbreak Bushing Insert and Elbow Design Test Report. Report Number:

25kV 200A Loadbreak Bushing Insert and Elbow Design Test Report. Report Number: 25kV 200A Loadbreak Bushing Insert and Elbow Design Test Report Report Number: Date: RN-R7604 9/16/2013 Table of Contents I. OBJECTIVE... 2 II. SUMMARY... 2 III. CONCLUSION... 2 IV. CABLE DATA... 2 V.

More information

Medium Voltage Catalogue 2013

Medium Voltage Catalogue 2013 Medium Voltage Catalogue 2013 D813 SAP.Nr. 198693 1112 Medium Voltage 2013 Data, values and illustrations given in this documentation are correct and reliable according to the current state of our knowledge.

More information

1500 kva Padmount Transformer delta Primary Voltage 208Y/120 Secondary Voltage

1500 kva Padmount Transformer delta Primary Voltage 208Y/120 Secondary Voltage 1500 kva Padmount Transformer 12470 delta Primary Voltage 208Y/120 Secondary Voltage Cooper Power Systems Proposal Number: BED1096719 Date: January 4, 2010 Revision 00 Item Number: 00001 Item Details Customer

More information