Lighting tracks and adapters for innovative luminaries

Transcription

1 Lighting tracks and adapters for innovative luminaries

2 The lighting track system Easy to cut Cutting to the required length can be done easily on site. It is not necessary to cut back or bend the copper bus bar. No need for any special tools. white black silver Mounting points Surface track with pre-punched slotted holes every 8 inches. Slotted holes are /4. Holes can be easily opened with a screwdriver or a similar tool. Colors Tracks are available in powder coated, white (close to RAL 906) and black (close to RAL 9005) or silver anodized. System components and adapter are available in three different colours, white (close to RAL 906), black (close to RAL 9005), and silver painted (close to RAL 9006). Tracks are colour matched to components and adapters as close as possible. The EUTRAC lighting track system - tracks, system components, adapters and monopoints - offers flexible and wide options of power supply products for your lighting structure. All EUTRAC plastic parts are manufactured out of self-extinguishing polycarbonate according to UL 94, class V0. All power and data bus contacts are manufactured out of high quality material for very high and good connectivity. This will guarantee a high durability and a long life cycle. All products are tested and certificated by ENEC 05, and comply with European standards EN and EN All products are CE marked. For the North American market the products are tested and certificated according to the UL standards. For the Russian market products are tested and certificated according to the GOST standard. 5EUTRAC

3 The intelligent lighting track system The lighting track system with full data functionality. will become an intelligent track system by simply using a lighting control system in your individual project: Public buildings, offices, conferences Calling light scenes for different activities, motion sensors connected to light fixtures in offices or other workplaces and light sensors for daylight-dependent lighting management. Besides visual ergonomics, EUTRAC Intelligent Lighting offers also significant potential for savings on energy costs in offices and administrative buildings. Exhibitions, museums, trade fairs Exhibits and presentations depend on the right light. In museums and at trade fairs, EUTRAC Intelligent Lighting offers new possibilities for showing objects in the right light, at the right time. Using timers, dimmers and light/motion sensors, lighting management can offer a whole range of technical possibilities to ensure intelligent use of modern lighting technology. This does not only save energy but may bring benefits for reasons of conservation too. Architecture, building facades, events Creative light scenes convert building facades and stages for shows or events into unique experiences. Use of specific lighting inside and outside of a building will help improving corporate appearance. In addition media facades are used to communicate visual messages and can be flexibly programmed with the help of a professional lighting management system. Hotels, restaurants, shops Today s products and brands are set in scenes using light. Modern lighting management offers convenient and practical solutions for showrooms, hotels and restaurants. Automatic light sequences can be used for dynamic lighting in shops. A room can be simply redecorated using blend of coloured light, changing its appearance without having to change the room itself. Airports, stations, underground garages Thanks to lighting management systems, lighting in public areas become increasingly more professional. With EUTRAC Intelligent Lighting, light can be optimised and adjusted according to requirements. Light will be controlled in brightness and colour, switched on and off or dimmed according to needs, times or events. Light scene control Light direction Colour change Data protocol Energy efficient Motion sensor Interactive Easy operation Lamp failure detection Time switching Day light control 6EUTRAC For further information visit

4 Intelligent Lighting The EUTRAC NetComposer, as the heart of an Intelligent Lighting control system, offers all possibilities to implement your lighting ideas into lighting solutions. Explore the functionality The NetComposer Communicates via three different digital control protocols, DALI, DMX/RDM and Wi-Fx wireless. Allows interconnection of up to 55 NetComposer through the ethernet building structure and therefore controllability of a max. of.000 light fixtures. Manages devices in 8 lighting groups and 8 global lighting scenes. Offers manual addressing, fully DMX/RDM functionality, time switching program with ASTRO functionality, colour / white light control, graphic moving light operation, day light control / motion sensor control, energy saving mode / power off functionality (switch off all standby consumer), logic modules / functionalities, APP user interface (Apple IOS, Windows WIN 7, Android). Project: Grange Tower Bridge Hotel Lighting design: BSEd Product: Track Mounted DR8 with 8 LED Head Manufacturer: Remote Controlled Lighting Ltd. For your individual project specification Energy-efficient lighting Flexible lighting Ambience lighting To reduce energy consumption, presence detectors and daylight sensors as well as automatic disconnection from the mains network in standby mode, help improving the energy balance. Practical and economical solutions for multifunctional use of rooms and buildings. Emotional wellness lighting and colour control for light moods and light experiences. Stage lighting Creativity for sales, presentations and building facades, as well as for events or theatres. 7EUTRAC

5 Surface track 0V 7/ 6 / 4 + Data bus 7/ 6 / 4 Lb. Mechanical load: page 46 Wiring diagram and information: page 48 Cutting to length possible on site ft lb Weight per foot: 0.75 lb Pre-punched slotted holes Suspension components: page 4-7 8EUTRAC white black silver

6 R Surface track 0V 5-conductor surface track for two circuits, consists of an extruded aluminium profile and two PVC supporter profiles, each with two impeded gauge cross section copper conductors, for two independent switchable circuits, earthing through the aluminium profile. 4 ft. 0-0 Easily field cut able with a standard saw, no cutting back or bending back of conductors necessary. The track has pre-punched slotted holes. EUTRAC adapters with data bus contacts can be used in tracks without data bus. Data functionality is not available in those cases. 8 ft. 0-0 The track described above can be also used for three circuit applications. Please pay attention to different wiring and see pages 4-5 for appropriate system components. ft Data bus 7-conductor surface track for two circuits plus data bus, consists of an extruded aluminium profile and two PVC supporter profiles, each with two impeded gauge cross section copper conductors, plus one PVC supporter profile with two impeded gauge cross section nickel plated copper conductors, for two independent switchable circuits, earthing through the aluminium profile plus two data conductors. 4 ft. -0 Easily field cut able with a standard saw, no cutting back or bending back of conductors necessary. The track has pre-punched slotted holes. The track system can be integrated into a building management system. Adapters with data bus contacts and SELV safety device ensure compliance with the Safety Extra Low Voltage regulations (SELV according to EN 60950). 8 ft. -0 The data information can be picked up anywhere along the track via data bus equipped adapters. Beside the DALI protocol the data bus can be used for DMX, 0-0V or KNX protocols. Adapters without data bus contacts can be also used in tracks with data bus. Data functionality is not available in those cases. The track described above can be also used for three circuit applications. Please pay attention to different wiring and see pages 4-5 for appropriate system components. ft. -0 R 0 ft. curved track available upon request SELV according to EN For further information visit 9EUTRAC

7 Surface track system components 0V + Data bus 7 /64 / earth inside right / 7 /64 / earth inside left / 7 /64 / earth outside right / 7 /64 / earth outside left / 7 /64 / X-coupler / earth run layout help ER inside ER right inside ER left 55 0 connection diagram for data bus wiring layout Attention: no closed circle structure ER left X-coupler ER inside ER outside ER = Earthing 55 0 ER right 0 white black silver

8 R Surface track system components 0V + Data bus 5 /64 7 /64 earth right /64 7 /64 earth left /4 End cap /8 7 /6 Straight coupler to join two sections of track electrically. For static reason order mechanical coupler (page 7) if suspended via pendant rod or wire / earth outside /64 7 /64 / earth inside /64 7 /64 I-coupler / 7 /64 Flex-coupler 0 to /64 /6-4 /4 5 7 /64 /64 5 /6 Mid feed to be placed anywhere along the track track cutting not required SELV according to EN For further information visit

9 R Surface track current limiters 0V + Data bus 49 /64 5 / 7 /8 Current limiter, end feed earth right order circuit breaker accordingly /64 5 / 7 /8 Current limiter, end feed earth left order circuit breaker accordingly /64 5 / 7 /8 Current limiter, I-coupler order circuit breaker accordingly /64 5 / California Title 4 Complaint Current limiter, end feed earth right with a fixed track section order circuit breaker accordingly / California Title 4 Complaint Current limiter, end feed earth left with a fixed track section order circuit breaker accordingly / California Title 4 Complaint Current limiter, I-coupler with fixed track section order circuit breaker accordingly Circuit breaker AMP 5 AMP 8 AMP AMP SELV according to EN white black silver

10 Surface track 77V 7/ 6 6/ Lb. Mechanical load: page 46 Wiring diagram and information: page 48 Cutting to length possible on site ft lb Weight per foot: 0.75 lb Pre-punched slotted holes Suspension components: page white black silver

11 Surface track 77V 5-conductor surface track for two circuits, consists of an extruded aluminium profile and two PVC supporter profiles, each with two impeded gauge cross section copper conductors, for two independent switchable circuits, earthing through the aluminium profile. 4 ft. 4- Easily field cut able with a standard saw, no cutting back or bending back of conductors necessary. The track has pre-punched slotted holes. 8 ft. ft Project: ROBERTO CAVALLI HQs & Showroom Milan, Italy, Arch.: Cavalli A&DD, Head Architect Barbara Picciolo, Photo: Beppe Raso, Product: PICTO, in-house design Artemide Architectural, Manufacturer: Artemide S.p.A R 0 ft. curved track available upon request For further information visit 5

12 Surface track system components 77V 7 /64 / earth inside right / 7 /64 / earth inside left / 7 /64 / earth outside right / 7 /64 / earth outside left / 7 /64 / X-coupler / earth run layout help ER inside ER right inside ER left ER left X-coupler ER inside ER outside ER = Earthing ER right 6 white black silver

13 Surface track system components 77V 5 /64 7 /64 earth right /64 7 /64 earth left /4 End cap /8 7 /6 Straight coupler to join two sections of track electrically. For static reason order mechanical coupler (page 7) if suspended via pendant rod or wire / earth outside /64 7 /64 / earth inside /64 7 /64 I-coupler / 7 /64 Flex-coupler 0 to /64 /6-4 /4 5 7 /64 /64 For further information visit 7

14 Pendant H-Profile / recessed profiles /8 Mechanical coupler for T-bar and spackle flange profile screws must be ordered separate recommended to use three pieces per joint /8 /8 / Feed in cap for T-bar and spackle flange profile incl. screws /64 5 /8 T-bar profile for surface track 0-. or -. with visible flange incl. screws material: aluminium powder coated L = /64 End cap for T-bar profile incl. screws material: aluminium powder coated /8 9 /6 /8 Suspension clips for T-bar profile, for tension grip, 6 pcs. recommended to use two clips for every four ft For further information visit white

15 Pendant H-Profile / recessed profiles /8 5 /6 Pendant H-Profile for surface track 0-. or -. to suspension via steel wire or pendant rod material: aluminum profile silver anodized L = End plate for H-Profile material: steel powder coated /6 Pendant H-Profile To be used with ~ / ~ surface track, robust construction for suspension point distance up to 0 ft. (max. 44 lb per suspension point). Upper compartment for integration of up light / LED fixtures or for use of installation and data wires. 5 /6 5 / Fixing device for H-Profile for suspension via steel wire or pendant rod Ø /8 IPS material: galvanized steel Mechanical coupler for H-Profile material: galvanized steel /6 5 /6 Spackle flange profile for surface track 0-. or -. with invisible flange, incl. screws material: aluminium profile raw L = /8 / End cap for spackle flange profile incl. screws material: aluminium L - coupler for spackle flange profile material: aluminium profile raw T - coupler for spackle flange profile material: aluminium profile raw X - coupler for spackle flange profile material: aluminium profile raw /4 / /8 5 /8 /6 /4 Suspension for T-bar and spackle flange profile incl. screw recommended to use one piece for every four ft silver 5

16 Surface track suspension components 0V/77V Pendant rod kit including ft pendant rod /8 IPS cable gripper, coupler and canopy Pendant rod other length on request to be used with pendant clips ft. 4 ft. 8 ft Support canopy kit for pendant rod (does not include rod) /6 /4 canopy cover /6 7 /64 Mid feed canopy cover /8 7 /64 /8 4 /6 5 /6 Multiple location feed cover /6 6 white black silver

17 Surface track suspension components 0V/77V 5 /6 /4 7 /6 Pendant clip for suspension by steel wire or pendant rod incl. lock nut /8 IPS material: aluminium anodized or powder coated /4 7 /6 5 /6 Mechanical coupler for suspension by steel wire or pendant rod incl. lock nut /8 IPS material: aluminium anodized or powder coated /6 Pendant clip for positioning over end feed /6 9 /6 T-bar mounting clip for use with 5/6 T-grid system material: steel black Pendant canopy and cable kit including aircraft cable, canopy, cable gripper and coupler 5 Support / feed canopy kit with pendant cable kit Support canopy kit with pendant cable kit Support canopy kit with pendant cable kit Pendant canopy kit including canopy and coupler 5 Support / feed canopy kit (does not include cable) Support canopy kit (does not include cable) Support canopy kit (does not include cable) Cable loop assembly 4 ft. 8 ft. ft. no cable cable 000 ft. roll white black silver 7

18 Mechanical load Drawings below show the possible maximum load of spot lights and other devices on the ~ track accordingly to their mounting or suspension points. The track weight is already taken into consideration. Surface Track Type: 0.../ / lbs lbs lbs lbs 6.6 Ibs 6.6 Ibs 6.6 Ibs 6.6 Ibs Ibs Ibs Ibs Ibs Important safety instructions Track is only to be used with other electrical fittings identified for use with the EUTRAC track system. To be installed by trained personnel only ( electricians ). The Installation and operation of this track system are subject to national safety regulations.the manufacturer is not liable for damage caused by improper use or installation. If any track system component is subsequently modified, the person responsible for the modification shall be considered as manufacturer. It is the responsibility of the installer to ensure the electrical, mechanical and thermal compatibility of the track system and the fittings. Materials used for ceiling fixation should conform to the relevant building regulations. It is essential to cover the ends of the track with end covers or protective caps. Do not install this track in damp or wet locations. Do not install any part of a track system less 5 ft. above the finish floor. Do not install this track on walls this track is only suitable for ceiling fixation. Do not install any fixture assembly closer than 6 in. from any curtain or similar combustible material. Disconnect electrical power before adding to or changing the configuration of the track. Do not attempt to energize anything other than lighting track fixtures on the track. In order to reduce the risk of fire and electrical shock, do not attempt to connect power tools, extension cords, appliances and the like to the track. Do not connect the track to more than the branch circuit unless the track is constructed so that it can be used with more than one branch circuit. Check with a qualified electrician. Although the track lighting system may seem to operate appropriately, a dangerous overload of the neutral may occur and result in a risk of fire. 46

19 Layout help Layout help for earth continuity The track offers earthing along one inner side of the profile. When planing the layout you need to consider earth continuity. The location of the earthing is defined by the view in direction of the track. The layout needs to be looked at true sided from above. Please see sketch below as a layout help. Choose the right end feed and coupling components from the given pictures. earth right 55 0 Layout shows surface track from a bird s eye view with the track opening pointed downwards. earth left 55 0 earth outside ER inside ER inside right ER left 55 0 earth inside 55 0 ER left 55 0 earth inside right 55 earth inside left ER inside X-coupler ER outside earth outside right 55 4 earth outside left 55 5 ER = Earthing 55 0 ER right X-coupler

20 Electrical connection / wiring diagram Installation Instruction: Please consider all safety notes from the technical manual. Keep them carefully in case you extend or change the installation. The technical manual is also available from our web page Lighting tracks are for indoor use only (IP0, 45 C max.), do not use in damp or wet locations. ~ track wiring diagram a a) Electrical connection for 0V alternating current: maximum load: fuse: supply cable:.400va x 0A 5 X Gauge recommended b) Electrical connection for 77V alternating current: maximum load: 5.540VA fuse: x 0A supply cable: 5 X Gauge recommended b c) Connection diagram for data bus wiring c Attention: no closed circle structure otherwise data bus functionality will be not given. 48

21 R Trademarks / regulations / data bus installation help Trademarkes and patents DALI: Digital Addressable Lighting Interface is the standard protocol for the lighting industry. It can be easily set up and installed by the electrician. There are 64 devices available per line. DALI System installation Are registered trademarks of Eutrac Stromschienen GmbH. The EUTRAC lighting track with data bus is patented. Maximum of devices The quantity of devices connected to a DALI line is restricted by 64 DALI addresses and a current consumption of max 00 ma in total. Advice Please note by many DALI participants the DALI reaction time may be slowed down due to the data traffic on the bus. Wiring The signal transmission in a DALI system is carried out by a two core leads. The cable isolation of the signal leads must be the same as for mains voltage cable, as DALI is a non SELV system. The conductor cross section (Cu) should be a minimum of 4 gauge. The signal conductors could be part of e.g. 5-core NYM mains cable; three cores are used for the mains voltage supply (L, N, PE) and the left two for the DALI signal. Do not use signal leads dimensioned for extra low voltage e.g. I-Y(St)Y or similar, since the DALI components are not according to the requirements for safety extra low voltage (SELV). By disregarding safety instructions live parts can be touched due to defects which can result in life danger. Cable length The total cable length between the last DALI participant and the NetComposer should not exceed 00 meter (approx. 000ft) including the cable length to feed the track. The total length of data bus track wiring should not exceed 500 ft. Connect devices Most DALI devices can be connected at any polarity. In case you have to connect polarity dependant DALI devices (recognizable e.g. by the terminal marks + and - ), you must always connect the conductors in the same polarity. Regulations All lighting tracks and components are CE conform, comply to relevant standards and regulations and designed according to the ENEC standards. All electronic parts are EMC tested. The data bus track system complies with and is tested against DIN EN for 50V/6A standard and may be used in arm s reach. In conjunction with SELV- (Safety Extra Low Voltage against EN 60950) safety data bus contacts all commodities DALI ballasts can be used with the EUTRAC I DALI data bus track system. Conformity declaration Eutrac Stromschienen GmbH herwith declares that all components of the lighting track system comply with the following European standards: Low Voltage regulation 7//EWG EMC regulation 89/6/EWG EN EN DMX5/RDM: Digital multiplex Signal is the standard protocol used in the stage lighting industry. It is characterized by rugged wiring and fast and safe data transfer There are 5 channels available per line. DMX System installation Maximum participants A DMX system (also named DMX universe ) operates with 5 addresses or channels. This ends up in a maximum of devices. If more devices are used then the use of a galvanic separated DMX repeater is needed. By a star-shaped installation a galvanic separated DMX splitter is needed. Wiring DMX requires the use of twisted shielded two-wire cable with a characteristic impedance of 0 Ohm. The shield has to be connected to DMX GND. The wiring system needs to be closed at each end by a 0 Ohm - resistor. The NetComposer has a resistor already built in. Cable length Lighting track system with data bus could be used for DMX operation up to max.50 ft. length. The track should be operated as a isolated galvanic universe. In this case the DMX GND will not be used. Only SELV devices should be used on the track system Caution! DMX GND shall not be connected to the PE connection of the housing device or of a 0V mains connection cable. Connect devices The data transmission in a DMX system is polarity dependant. Pay attention during installation and use a DMX cable tester to check the polarity. Test certification marks EUTRAC member of the AG DALI. Trademarks For further information visit 49