HP-4 WW-R. Finelite, Inc Whipple Road Union City, CA / Fax: 510 /

Transcription

1 Tunable White High Performance 10 Industry Best Year LED Warranty Date Project Type Comments DESCRIPTION High Performance Aperture Wall Wash (HP-4 WW-R) is a patented, high performance, asymmetric distribution recessed luminaire for vertical illumination applications. ORDERING GUIDE Sample Number: HP-4 WW-R - K - 32' - V - 8TW - 120V - C1 - SC HP-4 WW-R Finelite HP-4 WW-R Reflector (K - Kicker (standard), FO - Fully Open) Length / FineTune Only (Minimum 2', increments accurate to 1/1 (± 1/32"), standard) Length / Pre-qualified Controls by Others (4', 8', 12' multiples standard) Light Output (B - Boosted Standard, V - Very High) LED CRI/CCT (8TW - 80 CRI min, Tunable White; 9TW - 90 CRI min, Tunable White. See below for Tunable White controls options) Voltage (120V, 277V) Mounting (C1-1" T-Bar, C2-9/1 T-Bar, C3 - screw slot, C3F - flush screw slot, VF - Visible Flange, C2T - 9/1 tegular, C1T - 1" tegular, SF - Spackle Flange, TZ6 (C1, C2, C2T, C3, C3F) - Tech Zone ) Circuiting (SC - Single Circuit) Fine TUNE TUNABLE WHITE SYSTEM TUNABLE WHITE CONTROLS OPTIONS: SELECT ONE FineTune controller with FineTune DMX Driver Controls by others with pre-qualified DMX driver Controls by others with pre-qualified DALI driver Controls by others with pre-qualified PoE setup Controls by Lutron with pre-qualified Lutron driver OR Page 1

2 LUMINAIRE FEATURES Tunable White High Performance Mid-power LEDs Tj 60 C DIMENSIONS & LIGHT ENGINE Asymmetric distribution is attained with mid-power LEDs distributed evenly and paired with a precise diffuser. KICKER REFLECTOR The standard kicker reflector delivers light high on the vertical surface and provides excellent glare control. The kicker reflector is easily removed for open distribution. THERMAL MANAGEMENT Mid-power LEDs allow heat to be fully dissipated without the need for additional heat sinks. TUNABLE WHITE FEATURES 6500K 100% 2700K 1% Outstanding Interface MULTIPLE CONTROL ARCHITECTURES Finelite s FineTune DMX, qualified DMX, DALI (open and proprietary), or PoE (Power over Ethernet). TUNABLE WHITE Any CCT between 2700K and 6500K with excellent CRI and R9 values; dimming from 100% to 1%. FINETUNE SYSTEM Award-winning control system, which includes intuitive wall mounted controller, power control center, driver, and mobile app to easily tailor lighting to match user preference. Page 2

3 PHOTOMETRY Very High Output - 4' Luminaire With Kicker Total luminaire output: 1816 Lumens (454 lumens/foot) Peak Candela Value: 35º CCT: 3500K ITL LM79 Report Tunable White High Performance CANDELA DISTRIBUTION SUMMARY Flux Total Light Output, 3500K, 80 CRI (Lumens) - 4' Luminaire Light Output, 3500K, 80 CRI (Lumens Per Foot) Power, 3500K (Watts Per Foot) Efficacy, 3500K, 80 CRI (Lumens Per Watt) B - Boosted Standard Output, V - Very High Output * Family Correlation based on 4' luminaire 3500K 80 CRI Very High Output (V) test - 120V. ** Correlation based on ITL report: Lumen Adjustment Factors - 80 CRI 2700K K K K K Lumen Adjustment Factors - 90 CRI 2700K K K K K Apply a lumen adjustment factor to calculate lumens for the desired CCT and CRI SAMPLE LUMEN ADJUSTMENT CALCULATION Boosted Standard Output (B), 4000K, 90 CRI Lumen Adjustment Factor = Total Light Output = 935 lm x = 738 lm Total Light Output per Foot = 234 lm/ft x = 185 lm/ft Efficacy = watts/foot = 2.8 W/ft 185 lm ft 2.8 W ft = 66 lm/w Page 3

4 Tunable White High Performance Threaded Rod Option Mounting location for securing to structure Screw Mount Option HARD CEILING MOUNTING OPTIONS Two mounting options: threaded rod and screw mounting options. Mounting locations are located on each end of the lunmianire. Mounting location is away from each end of luminaire. T-BAR INSTALLATION: HP-4 R for T-Bar installations comes standard with a splice plate at the end of the luminaire. Mounting brackets (supplied) secure the luminaire to T-Bar and provide support to structure location. All even foot length (2, 4, 6,...) luminaire runs are reduced in length by an appropriate amount to fit within typical 2x2 and 2x4 T-Bar grid systems. For uncommon T-Bar systems please consult factory. GRID LENGTH DETAIL - 4' example 1" T-Bar 9/1 T-Bar Flange Housing Body & Diffuser = 46-7/8" Endcap for T-Bar End Flange Flange Housing Body & Diffuser = 46-7/8" Endcap for T-Bar End Flange 48" Center to Center 48" Center to Center 9/1 Screw Slot Flange Housing Body & Diffuser = 46-7/8" Endcap for T-Bar End Flange 48" Center to Center HARD CEILING LENGTH DETAIL - 4' example Spackle Flange Visible Flange 9/1 Flange Housing 48" Cutout Body & Diffuser = 48" 9/1 Flange Housing 7/1 48" Cutout Body & Diffuser = 48" 7/1 Page 4

5 MOUNTING TYPES: T-BAR Rough-In Dimensions with Kicker shown Tunable White High Performance 4-5/1 5" 1" T-Bar (C1) 9/1 T-Bar (C2) 1/1 Standard Screw Slot (C3) Flush Screw Slot (C3F) 5" 1" Tegular (C1T) 9/1 Tegular (C2T) Tech Zone (TZ6) 1" T-Bar (C1) Tech Zone (TZ6) 9/1 T-Bar (C2) 4-5/1 Tech Zone (TZ6) Standard Screw Slot (C3) 1/1 Tech Zone (TZ6) Flush Screw Slot (C3F) Tech Zone (TZ6) 9/1 Tegular (C2T) MOUNTING TYPES: CUTOUT DIMENSIONS 1/1 For mudding and taping 4-7/8" 4-1/ Spackle Flange (SF) Visible Flange (VF) HOUSING Version 1 Version 2 Version 3 Option VF * Note: +/- 1/1 Options C1T, C2T, C3F, SF, TZ6 Options C1, C2, C3 Page 5

6 Tunable White High Performance CONSTRUCTION: Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard. Housing is powder coated. REFLECTORS: Die-formed 25-gauge Alanod 8516GP semi-specular aluminum with 94% high reflectance finish. ENDCAPS: Flat endcaps at each end of run add 1/ to overall length. REFLECTOR: 94% reflective semi-specular reflector (94SS) provides reflectivity and glare control. The standard kicker (K) reflector delivers light high on the vertical surface. The kicker reflector is easily removed for open distribution (FO). DIFFUSER: Luminaires are standard with frosted diffusers. All diffusers are UV-stabilized and impact resistant virgin acrylic. Frosted diffusers are 0.080" thick. 12' maximum diffuser length. LIGHT OUTPUT: Two lumen packages available, Boosted Standard (B) and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LUMEN MAINTENANCE: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. TUNABLE WHITE DRIVER: Replaceable LED driver. Driver is accessible from below the ceiling. 120/277V. Power factor: Total Harmonic Distortion (THD): <20%. Dimming Range: 100-1%. Expected driver lifetime: 100,000 hours. ELECTRICAL: SPECIFICATIONS Emergency Option DMX: Battery backup only Emergency Option DALI: Battery backup, emergency-to-generator/ Inverter wiring Emergency Option LUTRON: Battery backup, emergency-to-generator/ inverter wiring Emergency Option PoE: Contact factory. Battery Backup: Factory-choice low-profile backup battery available. Chicago Plenum Option. 8' minimum luminaire length for low profile battery pack. Backup batteries deliver 1400 lumens. One 4' section will be illuminated in emergency mode. Backup battery will operate 6500K in emergency. MOUNTING: Standard bracket design works with most lay-in ceiling types. Brackets secure luminaire to the ceiling grid from above. Tie-in T-Bar brackets connect the luminaire to the T-Bar for securing to structure. Consult local codes for tie-wire recommendations. DMX INTERCONNECTION CABLES: Luminaires are prewired with plug-and-play interconnection cables to support easy plug-together joining of luminaire runs. If a non-finetune DMX system has been specified, a DMX to RJ45 converter is provided. FEED: Standard with one 18-gauge single-circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. DMX and power feed at same location (standard). Optional 6' flex conduit whips available for power feed. DMX feeds cannot be cut or spliced. DMX feeds should be ordered based on fixed lengths. LENGTHS / FINETUNE ONLY: Any length, 2-foot minimum, in increments down to 1/1 (± 1/32"). 12-foot maximum section length. LENGTHS / PRE-QUALIFIED CONTROLS BY OTHERS: 4', 8', and 12' sections can be combined to make longers runs. LABELS: Luminaire and electrical components are ETL-listed conforming to UL 1598 in the U.S.A. and CAN/CSA C22.2 No in Canada. In accordance with NEC Code (G), this luminaire contains an internal driver disconnect. Damp Location. IC-Rated. Finelite products use electronic components that are RoHS compliant, and the mechanical components of the luminaire have been verified to not knowingly contain any restricted substances listed per RoHS Directive 2002/95/EC. WEIGHT: 2.9 lb/ft. WARRANTY: 10-year performance-based warranty on all standard components. Qualified drivers by others and optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. TUNABLE WHITE PRE-QUALIFIED DRIVERS BY OTHERS DMX DALI POE set up LUTRON EldoLED EldoLED, Crestron Contact Factory LUTRON NOTE: For a complete list of system option/limitations please click here. Page 6

7 Setback Info and Application Data vhigh Output with Kicker Total luminaire output: 1450 Lumens (363 lumens/foot) 19.1 Watts (4.8 watts/foot) CCT: 3500K Tunable White High Performance Luminaire Wall Setback Distance Setback Distance - 2' ' Wall Luminaire length: 8' To Bottom of the luminaire: 9'-0" Room reflectances: Maintained illuminance levels LLF 0.90" Setback Distance - 2' ' Page 7