GUJARAT ENERGY TRANSMISSION CORPORATION LIMITED SARDAR PATEL VIDYUT BHAVAN RACE COURSE, VADODARA TENDER FOR

Transcription

1 GUJARAT ENERGY TRANSMISSION CORPORATION LIMITED SARDAR PATEL VIDYUT BHAVAN RACE COURSE, VADODARA TENDER FOR Erection, Testing and Commissioning of all 32 KV & 66KV Substation Equipments provided by GETCO with supply of minor items/hardware materials,excluding Civil works at 32KV Limkheda S/S. TENDER NO: GETCO / Erection /32KV Limkheda /5 PART III Price Bid Sign & seal of Bidder

2 This page has been kept intentionally Blank. Sign & seal of Bidder 2

3 ANNEXURE A to Bidding schedule for supply prices Name 0f Substation : Sr. No. Description Qty. In Nos. Rate unit Ex Works Frei -ght cha rge s Insu ranc e char ges Unit F.O.R. in Rs. ( ) Excise duty. % as well as amount Sale Tax % as well as amount CST = ON (4+9) VAT = ON (4+9) 5 6 Rate in % of Unit E.D. Rate in % Total Ex-Works Amount Rs. price CST VAT amount Rs. 9 Unit end Cost Price in Rs. (7+9+) Total Amount in Rs F.O.R COST IN RS. (3 X 7 ) 4 END COST IN RS. (3 X 2 ) Total Material Description & Qty. shall be as per supply price schedules I/ We agree to supply the articles noted above at the rates herein tendered by me/ us subject to the condition of tender and supply of the Tender inquiry, which I / We have carefully read and thoroughly understood. I/ We hereby agree to keep this offer open for 80 days after the date of the opening of technical bid of tenders and shall be bound by communication of acceptance dispatched within the prescribed time. Bidder's seal Bidder's Name : Signature : Name : Designation : Date : * Sign & seal of Bidder 3

4 ANNEXURE B -Bidding schedule for erection & commissioning prices Name of Substation: Amount in Rs. SR. NO. Descripti on Unit No./ wt. Qty. Particulars Erection/ Commis sioning rate per unit (Inclusiv e of Service Tax) Any other Tax Unit rate of erection & comm. charges +Any other tax Total erection & commissionin g charges on end cost basis (Qty. x Unit rate TOTAL Material Description & Qty. shall be as per Erection price schedule. The quoted rates shall be inclusive of any applicable service tax on this contract as per prevailing rates. No extra rates for service tax shall be quoted. I/ We agree to execute the articles noted above at the rates herein tendered by me/ us subject to the condition of tender and execute of the Tender inquiry, which I / We have carefully read and thoroughly understood. I/ We hereby agree to keep this offer open for 80 days after the date of the opening of technical bid of tenders and shall be bound by communication of acceptance dispatched within the prescribed time. Bidder's Name: Signature: Name: Designation: Bidder's Seal Date : Sign & seal of Bidder 4

5 TENDER NO GETCO / Erection /32KV Limkheda /5 Erection, Testing and Commissioning of all 32 KV & 66KV Substation Equipments provided by GETCO with supply of minor items/hardware materials,excluding Civil works at 32KV Limkheda S/S. Sr No Name of S/S Supply Erection 32KV Limkheda S/S TOTAL Total in Rs. (Figure in words : ) Bidder's Name : Signature : Name : Designation : Bidder's Seal Date : Sign & seal of Bidder 5

6 Tender No.: GETCO / Erection /32KV Limkheda /5 Name of Work: Erection, Testing and Commissioning of all 32 KV & 66KV Substation Equipments provided by GETCO with supply of minor items/hardware materials,excluding Civil works at 32KV Limkheda S/S. BOQ for 32KV Limkheda SUB-STATION(Erection Part with minor supply items) Tender BOQ for 32KV Limkheda SUB-STATION Sr. No. Particulars of Item Unit Erection Qty. Supply Qty. A Supply and Erection of 32kV Switchyard materials as per respective technical specifications and relevant special conditions suitable for one Main Bus scheme with Twin Zebra ACSR conductor and relevant Flyover Bus with Twin Zebra ACSR conductor. 2 Surge Arrester 20kV, 0kA, Cl-3 with str and clamp connectors as per Technical spec PT 32kV/:3-/0V/:3-3C with str and clamp connectors as per Technical spec No. 6 0 No PT 32kV/:3-/0V/:3-C with str and clamp connectors as per R&C No BPI 6kN with str and clamp connectors as per Technical spec No. 0 5 HDB Isolator with one ES 600A 40kA 3s with str and clamp connectors as per Technical spec Set B HDB Isolator without ES 600A 40kA 3s with str and clamp connectors as per Technical spec CT conventional /, 4C with str and clamp connectors as per Technical spec CT conventional (Ratio as per R&C) with str and clamp connectors as per Technical spec CB 600A 40kA 3s with str and clamp connectors as per Technical spec Supply and Erection of 32kV Switchyard materials as per respective technical specifications and relevant special conditions suitable for one Main Bus scheme with Twin Zebra ACSR conductor and relevant Flyover Bus with Twin Zebra ACSR conductor. Set. 6 0 No. 6 0 No. 4 0 Set. 6 0 Gantry structures GI as per BOM, Steel & A/B part MT Gantry structures GI as per BOM, Bolt nut part MT 0 Sign & seal of Bidder 6

7 3 A B C Stringing of bus with Twin Zebra ACSR conductor for all the three phases with required insulators, hardwares & accessories, spacers provided at every 4.0 mtr. interval etc. complete as per relevant standards and approved drawings with Jumpers for continuous Bus Arrangement (It includes cost of insulators, hardwares & accessories, spacers etc.all items required for satisfactory functioning. Any variation in quantities shall be absorbed by contractor). Main Bus with 33 Mtr span including bus jumpers Main Bus with 22 Mtr span including bus jumpers Trasformer flyover bus with 38 Mtr span Span Span Bay d Main Bus with 53 Mtr span No of Span 4 Stringing of Earth Wire with 7/3.5 GS wire with required hardwares & accessories etc. complete as per standards and approved drawings for span meter(it includes cost of hardwares & accessories, etc. all items required for satisfactory Span functioning. Any variation in quantities shall be absorbed by contractor). a Main Bus with 22 Mtr span Span 4 4 b Line Bus with Mtr span Span 4 4 c Trasformer flyover bus with 38 Mtr span Span 3 3 d Main Bus with 53 Mtr span span e Other Requirement with 5 Mtr Span Span 5 Droppers (including required suspension string with hardware & accessories if any) & Jumpers (including Equipment to Equipment) with Twin Zebra ACSR conductor as per standards and approved drawings with provision of required spacers( Suitable for 350mm spacing) at every 4.0 mtr. interval.(it includes cost of insulators, hardwares & accessories, Fire Wedge connectors, spacers etc.all items required for satisfactory functioning. Any variation in quantities shall be absorbed by contractor) a 32/66KV Transformer Bay (32 KV Side) bay 2 2 b 32KV Line Bay bay 2 2 c 32KV Line Bay ( Rly Feeder) bay 2 2 d 32 KV Jack Bus No of Bay 6 a b Droppers (including required suspension string with hardware & accessories if any) & Jumpers with Single Zebra ACSR conductor as per standards and approved drawings (It includes cost of insulators, hardwares & accessories, Fire Wedge Connectors, etc.all items required for satisfactory functioning. Any variation in quantities shall be absorbed by contractor) 32KV Line Bay - LA & CC 32KV Line Bay - LA, PT (Rly Feeder) bay bay Sign & seal of Bidder 7

8 c d 32/66KV Transformer Bay (32 KV Side) - LA 32KV PT Bay bay bay 2 2 C Supply and Erection of 66kV Switch Yard Material as per respective technical specifications and relevant special conditions suitable for one Main Bus scheme with Twin Zebra ACSR conductor scheme & relevant Flyover Bus with Twin Zebra ACSR conductor.. Surge Arrester 60kV, 0KA, Class 3 with structure and clamp connectors suitable for Single Moose ACSR BPI 4kN with structure and clamp connectors suitable for Twin Zebra ACSR BPI 4kN with structure and clamp connectors suitable for Single Moose ACSR HBPI 4kN with structure and clamp connectors suitable for Twin Zebra HDB Isolator with one ES 630A 25kA 3s with structure and clamp connectors suitable for Single Moose ACSR HDB Isolator without ES 630A 25kA 3s with structure and clamp connectors suitable for Single Moose ACSR HDB Isolator without ES 250A 25kA 3s with structure and clamp connectors suitable for Twin Zebra ACSR CT / 3C, 3.5KA 3S with structure and clamp connectors suitable for Single Moose ACSR CT / 3C 3.5KA 3S with structure and clamp connectors suitable for Twin Zebra ACSR CB 600A 25kA 3S with structure and clamp connectors suitable for Single Moose ACSR CB 600A 25kA 3S with structure and clamp connectors suitable for Twin Zebra ACSR No. 2 0 No. 8 0 No. 5 0 No. 6 0 Set. 5 0 Set. 5 0 Set. 2 0 No. 5 0 No. 6 0 Set. 5 0 Set. 2 0 D Supply and Erection of 66kV Switch Yard Material as per respective technical specifications and relevant special conditions suitable for one Main Bus scheme with Twin Zebra ACSR conductor scheme & relevant Flyover Bus with Twin Zebra ACSR conductor. Gantry structures GI as per BOM, Steel & A/B part MT Gantry structures GI as per BOM, Bolt nut part MT 0 3 Stringing of bus for all the three phases with Twin Zebra ACSR conductor, insulators hardwares, spacers(suitable for 350mm spacing) at interval of 4.0 mtr complete as per relevant standards and approved drawings.(the scope includes the cost of insulators, hardwares, accessories, spacers etc.all items required for satisfactory operation. Any variation in quantities shall be absorbed by erection contractor). a Main Bus with Mtr. Span including bus jumpers Span b Main Bus with 25.0 Mtr. Span including bus jumpers Span c Main Bus with Mtr. Span including bus jumpers Span d Transformer flyover bus with Mtr. Span 2 2 Sign & seal of Bidder 8

9 bay Stringing of Earth Wire with 7/3.5 GS wire with required hardwares & accessories etc. complete as per standards and 4 approved drawings for the shown span. (It includes cost of hardwares & accessories etc. all items for satisfactory functioning. Any variation in quantities should be absorbed by erection contractor) a Main Bus with 25.0 Mtr. Span Span 2 2 b Main Bus with Mtr. Span Span 2 2 c Line Bus with 7.3 Mtr Span Span 5 5 d Transformer flyover bus with Mtr. Span bay a 6 a 7 a E Droppers (including required suspension string with hardware & accessories if any) & Jumpers (equipement to equipment )with Single Moose ACSR conductor as per standards and approved drawings. (It includes cost of insulators, Fire wedge connectors,hardwares & accessories etc. all items required for satisfactory functioning. Any variation in quantities shall be absorbed by erection contractor). 66KV Line Bay Droppers (including required suspension string with hardware & accessories if any) & Jumpers with Single Zebra ACSR conductor as per standards and approved drawings. (It includes cost of insulators, Fire wedge connectors,hardwares & accessories etc. all items required for satisfactory functioning. Any variation in quantities shall be absorbed by erection contractor). 32/66KV Transformer Bay - LA Droppers and Jumpering (equipment to equipment) with Twin Zebra ACSR conductor as per standards and approved drawings with provision of spacers suitable for 350mm spacing at 4.0 mtr interval. (The scope includes the cost of accessories,spacers, fire wedge connectors etc.all items required for satisfactory operation.) 32/66KV Transformer Bay (66KV side) Supply and Erection of General purpose equipments and materials as per respective technical specifications and relevant special conditions. Suitable arrangement of KV Distribution Transformer (/0.45) with suitable Dist. Box and its fixing -mounting arragement in existing place of station trnaformer with necessary modification of foundation. AC unit 3 Ton Split for Control room (5 star rating and reputed make) AC unit.5 Ton Split for Control room (5 star rating and reputed make) Distribution transformer 500 KVA with suitable Dist. Box and its fixing - mounting arrangement bay bay bay Package LS LS No. 4 4 No 2 2 No. 0 5 Providing major spares as per Ann A attached herewith Set 0 6 Providing instruments as per Ann B attached herewith Set 0 7 Providing tools and tackles etc. as per Ann C attached herewith Set 0 Sign & seal of Bidder 9

10 8 Supply and Erection of Fire stand with 4 buckets including concreting as per our drawing & Instruction of E. I. C. Set 9 Providing of rubber Matting (size 3'x3'x20mm) in control room No Supply and installation of ISI marked fire extinguishers of various types required for 32 KV sub station. F ) Dry chemical powder type of 0 Kg. capacity. No ) Dry chemical powder type of 25 Kg. capacity. No. 0 3) Dry chemical powder type of 50 Kg. capacity. No. 0 4) Carbon dioxide ( CO2) gas type of capacity 6.5 Kg. capacity No ) Carbon dioxide (CO2) gas type of capacity 22.5 Kg. capacity No. 0 6) Mechanical Foam type of capacity 9 LT. No ) Mechanical Foam type of capacity 50 LT. No. 0 Supply and installation of materials for Illumination system in all respect as per respective specifications and special conditions ( Sucessful bidder has to submit the complete design and BOQ for approval) Providing & Fixing of Energy Efficient T5 type Indoor decorative luminaries in all the rooms of control room building complete (ref. Ann-4 Item (A)) as per technical spec Cl No (EEI type ) as per design with respect to required lux level and relevant tender drgs. with required industrial grade point wiring as per technical spec. Scope also includes providing and fixing of 5/5 A plug, Portable Emergency Light, Bell, Fan, Ex- Fan, DC Point, with requisite MCBs and DC 00W lamp, DC Plug etc all items as per Ann-4 Item (A) in following rooms i Control Room Package LS LS ii Office Room Package LS LS iii PLCC Room (Exiting Office Room) Package LS LS 2 Providing & Fixing of Energy Efficient T5 Industrial type Indoor luminaries in all the rooms, passages of control room building complete (ref. Ann-4 item (A)) as per technical spec Cl No (EEI type) as per design with respect to required lux level and relevant tender drgs. with required industrial grade point wiring as per technical spec. Scope also includes providing and fixing of 5/5 A plug, Portable Emergency Light, Bell, Fan, Ex- Fan, DC Point, with requisite MCBs and DC 00W lamp,dc Plug etc all items as per Ann-4 Item (A) in following rooms, passages etc. i Store Room Package LS LS ii Battery Room (Existing Battery Room) Package LS LS iii LV Room (Existing Office Room Package LS LS Sign & seal of Bidder 0

11 Providing and fixing of flood light luminaries as per design for 32kV switch yard area with Philips/CGL/Bajaj/GE/Oshram make HPSV 50/250/400W lamp with energy efficient type choke (HF) with control gear box & ancillaries and suitable for mounting on structure at appropriate height ( as per design) as per specifications TS illuminations cl. no with necessary GI fabrication & GI bolt nuts to fix control gear box at the structure with complete internal and external wiring to J. box,dist panel/section feeder pillar etc with supply of required 3 c x 2.5 mm2 copper armoured cable (as per spec ).The scope includes supply and erection of all the materials required for satisfactory functioning of above work. Providing and fixing of flood light luminaries as per design for 66kV switch yard area with Philips/CGL/Bajaj/GE/Oshram make HPSV 50/250W lamp with energy efficient type choke (HF) with control gear box & ancillaries and suitable for mounting on structure at appropriate height ( as per design) as per specifications TS illuminations cl. no with necessary GI fabrication & GI bolt nuts to fix control gear box at the structure with complete internal and external wiring to J. box,dist panel/section feeder pillar etc with supply of required 3 c x 2.5 mm2 copper armoured cable (as per spec ).The scope includes supply and erection of all the materials required for satisfactory functioning of above work. Providing and installation of post top lantern for main gate and road from main gate to swichyard via control room as per design with Philips/CGL/Bajaj/GE/Oshram make and energy efficient type suitable wattage lamp with control gear box & ancillaries suitable for mounting on Gate pillars and 4.5 mtr poles with necessary GI fabrication & GI bolt nuts to fix control gear box with complete internal and external wiring to J.box,Dist panel/section feeder pillar, fixing terminal etc. with supply of required 3 c x 2.5 mm2 copper armoured cable as per spec.this also includes the supply and erection of required 4.5 mtr poles and its foundation work as per spec and earthing with main mesh. The scope includes supply and erection of all the materials required for satisfactory functioning of above work. Providing and fixing of flood light luminaries as per design for Store shed area with 50/250/400W HPSV lamp with energy efficient choke containing Philips/CGL/Bajaj/GE/Oshram make with control gear box & ancillaries and suitable for mounting on structure at appropriate height (as per design-ref.annx 5) as per specifications with necessary GI fabrication & GI bolt nuts to fix control gear box at the structure with complete internal and external wiring to J. box, Dist panel/section feeder pillar etc. with supply of required 3 c x 2.5 mm 2 copper armoured cable (as per spec).the scope includes supply and erection of all the materials required for satisfactory functioning of above work. Package LS LS Package LS LS Package LS LS Package LS LS Sign & seal of Bidder

12 Providing and fixing of street light luminaries for reamaing area (like road, peripheral area etc.) of switch yard complete as per design with Philips/CGL/Bajaj/GE/Oshram make and energy efficient type 70 W (or suitable wattage )lamp with control gear box & ancillaries suitable for mounting on 7.0 mtr swaged poles as per spec.ts illuminations cl. no (EEO2) at appropriate height with necessary GI fabrication & GI bolt nuts to fix control gear box with complete internal and external wiring to J. box,dist panel/section feeder pillar, fixing terminal etc with supply of required 3 c x 2.5 mm2 copper armoured cable (as per spec). This also includes the supply and erection of 7.0 mtr swaged pole and foundation work as per spec. and panting with two coats of primer and two priming of zinc chromate as well as earthing with main mesh. The scope includes supply and erection of all the materials required for satisfactory functioning of above work. Supply and Erection of main lighting Panel ACP- as per Specifications. Set comprises minimum 2 nos.of such panels qty may be more if required as per design.scope also includes the providing and erection of 25x6 GI strip for earthing with main mesh Supply and Erection of main lighting Panel ACP-2 as per Specifications Set comprises minimum 2 nos.of such panels qty may be more if required as per design.scope also includes the providing and erection of 25x6 GI strip for earthing with main mesh Supply and Erection of main lighting Panel ACP-3 as per Specifications Set comprises minimum 2 nos.of such panels qty may be more if required as per design.scope also includes the providing and erection of 25x6 GI strip for earthing with main mesh Supply and Erection of main lighting Panel ACP-4 as per Specifications Set comprises minimum nos.of such panels qty may be more if required as per design.scope also includes the providing and erection of 25x6 GI strip for earthing with main mesh Supply and Erection of main Yard light Dist. Board as per designed capacity ratings.scope also includes the providing and erection of 50x6 GI strip for earthing with main mesh Providing of concreting in :2:4 mix including muffing for erection of pole & Dist boxes panels including excavation of HR/SR as per approved drawing. Providing & fixing of ' B ' Class ISI marked GI pipe of 25 mm inner diameter for cable looping, road crossing with necessary elbow / band to J. Box etc. Providing and fixing of GI clamp (25mm wide GI strip with 6 mm GI nut bolts) on structure at approx. /2 Mtr. Interval for clamping of cable. Clamp should be fix in such a way that cable can be easily mount inside it & sustain standing on structure. This also includes required other materials,accessories required for complete functioning of Illumination system of whole project (switch yard and all buildings, structures) those are not covered in this schedule for Illumination. Please refer the drawing "General Schematic for Illumination" in the TS Illumination. Package LS LS Set Set Set Set Nos 2 2 Package LS LS Package LS LS Package LS LS Sign & seal of Bidder 2

13 Note: The qunatities of the ACP's mentioned in the schedule of requirement are based on std. requirement, which shall be finalised during detail engineering. The bidder has to assess the qty. of ACP's at the time of quoting the bid. The qty of ACP's finalised during detail engineering is binding to the bidder & no any extra payment shall be made. In all the case the decision of GETCO will be final. G H Supply and installation of materials for Earthing system in all respect as per respective specifications and special conditions ( Sucessful bidder has to submit the complete design and BOQ for approval) Supply and Installation of earthing strips/round bars as shown below including digging of 600 mm depth and 450 mm wide trench fixing on structure as per std equipment earthing phylosophy incuding fixing arrangement with two bolt arrangement, jointing, welding etc. complete. a) 75 x 0 mm GI strip. RMt b) 50 x 6 mm GI strip. RMt b) 40 mm dia steel rod RMt c) 40mm dia 3mtr long steel rod Nos d) 7/3.5 Earth wire for earthing of Towers with peak RMt Providing and installing Check pit as per drawing and instruction of Engineer In charge with provision of earth Nos. 4 4 chamber. Installation of treated pipe electrode providing 00 mm inner diameter CI pipe of 3 mm thickness and 3000 mm length as per GETCO drg No P0. Work includes fabrication and fixing of GI strips for earthing connection Providing BB masonary inspection chamber (man hole) incl.light type CI cover as per GETCO drawing no P0 Nos Nos Note: Extra earth should be removed away from the site s/s premises or refilling earthing pits if required. All required materials for this job such as CI pipe, CI cover with frame, salt, cement, sand, charcoal/bentonite, gravel, bricks etc. to be supplied by the contractor. Supply and Erection of Ladder Type Cable Trays and Accesories as per respective Technical Specifications and relevant special conditions. Width of tray 400mm Rmtr mm Rmtr Length: Standard length of tray is 2500mm, Height is 75mm, Thickness is 2mm (min.) I Dismantling and Removing the existing Single 66 KV bus (39.80 Mtr) (The scope includes removing of existing structure, conductor, Insulator and Dropper. Dismantled Items shall be kept in GETCO store as per directd by Electrical Incharge) Lumsum 0 J Note: Cross, Tees, Elbows, Coupler plates, Bends, Reducer etc. required for complete installation of Ladder Type Tray are included in the Scope. Supply, Erection, Testing and Commissioning of Protection equipments and materials as per respective technical specifications and relevant special conditions and suitable for Single Main Bus system on 32kV side Control & Relay Panels for 32KV Bays ( Control Voltage - 0V DC ) as per tech specifications with following break up ) Control & Relay panel for line Set 2 0 Sign & seal of Bidder 3

14 A) Control & Relay Panel for Raliway Line (i.e. with Distance Protection Set 2 0 Relay compatible for two phase) 2) Control & Relay panel for Transformer with Differential Set 2 0 3) Control & Relay panel for TBC Set 0 0 4) Control & Relay panel for BC Set 0 0 5) Busbar Protection Panel (CU & PU shall be mounted in resp. bay panels) Set 0 0 Supply, Erection, Testing and Commissioning of K Protection equipments and materials as per respective technical specifications and relevant special conditions and suitable for Single Main Bus system on 66kV side Control & Relay Panels for 66kV bays ( Control Voltage - 0V DC ) as per tech specifications with following break up. ) Control & Relay Panel for 66kV lines Set 5 0 2) Control & Relay Panel for Transformer With Differerential Relay (For 66/kV TR) Set 0 0 3) Control & Relay Panel for Transformer W/O Differerential Relay (For 32/66kV TR) Set 2 0 Supply, Erection, Testing and Commissioning of General purpose equipments and materials as per respective L technical specifications and relevant special conditions and suitable for Single Main Bus system on 32KV as well as 66kV side. Battery set - 0 V, 250Ah (2 V, 55 cells) Tubular Lead Acid Battery Set with FRP stand of adequate size to suite the existing Battery room dimensions No. 0 Battery stand shall be sectionalised such that it can be easily taken inside battery room with available space. 2 Battery Charger - 0 V (Float - 30A / Boost - 50A) No. 0 3 DCDB-0 V with 35 Feeder No DCDB-0 V with 20 Feeder No. 0 5 LTPB No. 0 6 M Dismentalling of following Existing AC-DC Auxiliaries with all required tools tackles to suite the site conditions. Battery set - 00 Ah Tubular Lead Acid - No. Battery Charger - Single Phase 0/20 A - No. LT Panel Board - No. Supply and installation of materials/item for Power Cable and control Cable wiring including preparation of wiring schedule. Supply and Laying of. kv PVC armoured copper/aluminum control/lt power cable in trench including binding/clamping of cable with PVC locable wire tie as per requirement including supply and fixing of identification tags on both ends and at distance of every 00mtr. (Note :- Aluminium cables of size 85 mm 2 & above shall be XLPE type) ) 2c x 2.5 mm 2, armoured copper control cable Mtr ) 2c x 4 mm 2, armoured copper control cable Mtr ) 4cx2.5 mm 2, armoured copper control cable Mtr ) 4c x 4 mm 2, armoured copper control cable Mtr ) 7c x 2.5 mm 2, armoured copper control cable Mtr ) 2c x 2.5 mm 2, armoured copper control cable Mtr LS Sign & seal of Bidder 4

15 7) 2c x 4 mm 2, armoured copper control cable Mtr ) 9c x 2.5 mm 2, armoured copper control cable Mtr ) 27c x 2.5 mm 2, armoured copper control cable Mtr A) x 50 mm 2, armoured copper cable Mtr B) 4C x 0 mm 2, armoured copper control cable Mtr ) 4 x 0 mm 2, Al. armoured LT cable Mtr ) 3.5 x 25 mm 2, Al. armoured LT cable Mtr ) C x 50 mm 2, Al. armoured LT cable Mtr Termination of the control cable at panel / MK box/equipment including PVC binding dressing/shaping drilling of holes in panels for glands nuts for following size. The work also includes Looping in panel and MK box with using crimping type 2 of lugs of suitable size with ferruling with proper size of copper cable wire. The loops should be bunched with using button tape and proper shaping etc. ) cables from 2 core to 7 core of 2.5 & 4.0 Sq.mm size No ) cables above 7 core No Laying of.kv PVC/XLPE armored Al. LT power cable in ground by digging trench of suitable width and 450 mm depth with providing and fixing of brick and sand layer covering the cable in any type of soil and Laying of.kv PVC armored copper control cable in heavy duty PVC pipe of suitable size 3 buried in ground by digging trench of suitable width and 450 mm depth in any type of soil including supply and fixing of Pipe and identification tags at distance of every 00 Mtrs for following size ) Control Cables upto 7 core Mtr ) Control Cables above 7 core and all LT cables Mtr Providing and fixing of 50mm dia 'B' class GI pipes with necessary size of band and couplings for control cable 4 protection of CT, PT/CVT etc.equipments including fixing with structures as per instruction of Engineer-in-charge. ) 32 kv switch yard Mtr ) 66 kv switch yard Mtr Providing and fixing of 00mm dia 'B' class GI pipes with necessary size of band and couplings for control cable 4a protection of CB, Isolator etc.equipments including fixing with structures as per instruction of Engineer-in-charge. ) 32 kv switch yard Mtr ) 66 kv switch yard Mtr Providing and fixing bay MK as per tech spec No Providing and fixing Yard LT ACDB as per tech spec -with 20 OG feeders No Providing and fixing Yard LT ACDB as per tech spec -with 2 OG feeders No Providing and fixing of all weather proof, cold rolled sheet steel junction box for CVT & PT, CT terminations with 30 Nos. of disconnecting type, 'Elmex' make CATDM 4 or equivalent type connectors and required no of fuses, links etc.as per instruction of Engineer-in-charge. No. 8 8 N PLCC ITEMS Sign & seal of Bidder 5

16 kV,4400PF CC with clamp/connectors & supporting structure. The interconnection from HF terminal of CC to PLCC coupling device shal l be made using 6 Sq.mm PVC insulated stranded (non flexible strands) copper cable. 32kV, 0.5mH, 630Amp Wave Trap with Blocking Band of, Band-(I) & Band-(II) KHz and R min = 570 Ohm and single point suspension arrangement with three tie rod assembly including insulator string assembly, clamp/connectors and require accessories. Modular coupling device MCD-80, Make: ABB (Set comprising of A9BS & A9BT) for Phase to Phase coupling arrangement for PLCC signal connectivity. 40 Watt single channel fully programmable carrier terminal of Make: ABB &Type: ETL-4, Protection coupler Make: ABB & Type: NSD-50 with 2 coded & 2 uncoded command arrangement & perfectly match with above carrier terminal description of which given at Sr. No. 4 above. No. 8 0 No. 8 0 Set 4 0 No. 4 0 No FSK Data Modem Make: ABB & Type: NSK 5, Programmable for both Baud Rate (50 to 2400 Baud) and VFT Channel Centre Frequency and fully compatible with 40W fully programmable Carrier terminal Type :ETL-4, Make: ABB. No. 0 7 laying of 75 Ohm, unbalanced armoured Co-axial cable for PLCC signal connectivity and providing UHF gland on both the ends of each main cable length to be laid for PLCC carrier room to bay gentry and loop cable for Ph to Ph coupling arrangement. KM Volt, 250AH capacity, storage Low Maintenance, High performance Lead acid Battery set set (25 Nos. of cell/set) 0 9 Float & boost charger with float 0/p volt : 50 to 58 volt, 40 Amp, Boost 0/p : 50 to 72V, 35 Amp with Variac & Servo Motor mechanism for Auto Operation for DC O/P Voltage Adjustment of Float Charger with out SCADA Compatible as per TS. No. 0 0 DCDB with 0 Nos. of Feeders (6 Amp each) for DC supply to PLCC panels & Exchange as per technical Specification. No. 0 PLCC Exchange No. 0 2 DAS Meters network wiring complete up to RS 485 to RS 232 Convertor of DAS PC using a) 3 core communication cable (as per specification given hereunder) b) RS 485 to RS 232 Converter (as per specification given hereunder) Job Mtr No. 3 DAS PC with printer No. Sign & seal of Bidder 6

17 NOTE: Supply & Erection of 32/66KV Transformer is not in the scope of awardee, but awardee will erect the itmes other than the scope of transformer manufacturer and witness during the erection and testing of the same and provide all the result in as built drawings/documents Sign & seal of Bidder 7

18 Annexure - 4 Sr. No. A Location Control Room Building Detail Area X x Y Mtr. Ht. in Mtr. Avg Illumination level Required in LUX AC.5 T Split AC 3 T Split 5 A Plug 5 A Plug Fan Ex Fan DC Point DC Plug Portable Emergency Lighting Bell 3 ph.wtih neutral 5A test plug Control Room 7.5 X Store Room 3.5 X Office Room 3.5 X PLCC Room 3 X Battery Room 3.5 x LV Room 5 x NOTE: Control room out skirt area/porch shall be provided with suitable water tight bulk head fittings as per design. Sign & seal of Bidder 8

19 Annexure - 5 Details of Illumniation for Switch yard Sr. No. Location Details 32 kv switch Yard Upper Bus height 0 Mtr Lower Bus height 7.25 Mtr Equipments Height from Ground 4.6 Mtr+0.3 Mtr plinth Lux level Required for main Equipments - 4.6Mtr Height 50 Lux level rquired for Other area kV switch Yard Upper Bus height 0 Mtr Lower Bus height 7 Mtr Equipments Height from Ground 4.0 Mtr+0.3 Mtr plinth Lux level Required for main Equipments - 4 Mtr Height 50 Lux level rquired for Other area 20 Lux level required for follwing amminities 3 Car Parking Area 20 4 Main Roads (Post Top Lantern) 20 5 Sub Road (Street Light) 20 6 Fencing Light and Spare Area (Street Light) 20 7 Oil Filtration shed 70 8 Garden of Transit Camp (Post Top Lantern) 20 Note: The area if not applicable as per layout of the project may please be ignored. Sign & seal of Bidder 9

20 Annexure-6 BREAK UP OF SWITCHYARD BOQ FOR32KV SUB-STATION Sr.No. Particulars of Item Unit Erection Qty Supply Qty 3 a b Supply and Erection of 32kV Switchyard materials as per respective technical specifications and relevant special conditions suitable for One Main Bus scheme with Twin Zebra ACSR conductor and relevant Flyover Bus with Twin Zebra ACSR conductor. Stringing of bus with Twin Zebra ACSR conductor for all the three phases with required insulators, hardwares & accessories, spacers provided at every 4.0 mtr. interval etc. complete as per relevant standards and approved drawings with Jumpers for continuous Bus Arrangement (It includes cost of insulators, hardwares & accessories, spacers etc. all items required for satisfactory functioning. Any variation in quantities shall be absorbed by contractor)-qty. per span of 3 phase Main Bus with 33 Mtr span including bus jumpers Span Insulators-20KN AF Per Span No Double Tension H/W & Acc with Turn Buckle.-Twin Zebra ACSR Per Span No. 3 3 Double Tension H/W & Acc without Turn Buckle.-Twin Zebra ACSR Per Span No. 3 3 Spacers suitable for Twin Zebra ACSR (350mm Spacing) in Main Bus Per Span No. 8 8 Main Bus with 22Mtr span including bus jumpers Span 2 2 Insulators-20KN AF Per Span No Double Tension H/W & Acc with Turn Buckle.-Twin Zebra ACSR Per Span No. 3 3 Double Tension H/W & Acc without Turn Buckle.-Twin Zebra ACSR Per Span No. 3 3 Spacers suitable for Twin Zebra ACSR (350mm Spacing) Per Span including BUS jumpers No. 8 8 c Transformer flyover bus with 38 Mtr span Bay 2 2 Insulators-20KN AF Per Span No Double Tension H/W & Acc with Turn Buckle.-Twin Zebra ACSR Per Span No. 3 3 Double Tension H/W & Acc without Turn Buckle.-Twin Zebra ACSR Per Span No. 3 3 Spacers suitable for Twin Zebra ACSR (350mm Spacing) Per Span No. 2 2 d Main Bus with 53 Mtr span Bay Sign & seal of Bidder 20

21 Insulators-20KN AF Per Span No Double Tension H/W & Acc with Turn Buckle.-Twin Zebra ACSR Per Span No. 3 3 Double Tension H/W & Acc without Turn Buckle.-Twin Zebra ACSR Per Span Spacers suitable for Twin Zebra ACSR (350mm Spacing) Per Span No. 3 3 No Stringing of Earth Wire with 7/3.5 GS wire with required hardwares & accessories etc. complete as per standards and approved drawings for span meters.(it includes cost of hardwares & accessories etc. all items required for satisfactory functioning. Any variation in quantities shall be absorbed by contractor) a Main Bus with 22 Mtr Span Span 4 4 Earthwire Access.- Suitable for 7/3.5 GS per span No. 2 2 b Line Bus with Mtr Span Span 4 4 Earthwire Access.- Suitable for 7/3.5 GS per span No. 2 2 c Transformer flyover bus with 38 Mtr span Span 3 3 Earthwire Access.- Suitable for 7/3.5 GS per span No. 2 2 d Transformer flyover bus with 53 Mtr span Span Earthwire Access.- Suitable for 7/3.5 GS per span No. 2 2 e Other Requirement with 5 Mtr Span Span Earthwire Access.- Suitable for 7/3.5 GS per span No Droppers (including required suspension string with hardware & accessories if any) & Jumpers (including Equipment to Equipment) with Twin Zebra ACSR conductor as per standards and approved drawings with provision of required spacers (Suitable for 350mm spacing) at every 4.0 mtr. interval (It includes cost of insulators, hardwares & accessories, Fire Wedge connectors, spacers etc.all items required for satisfactory functioning. Any variation in quantities shall be absorbed by contractor)-qty. per bay of 3phase a 32/66KV Transformer Bay (32KV Side) bay 2 2 Insulators-20KN AF Per Bay No Single Suspension H/W & Acc.-Twin Zebra ACSR Per Bay No. 3 3 Spacers suitable for Twin Zebra ACSR (350mm Spacing) Per Bay No. 9 9 Fire Wedge Connectors suitable for Zebra ACSR to Zebra Per bay No. 2 2 b 32KV Line Bay bay 2 2 Insulators-20KN AF Per Bay No Single Suspension H/W & Acc.-Twin Zebra ACSR Per Bay No. 3 3 Spacers suitable for Twin Zebra ACSR (350mm Spacing) Per Bay No Fire Wedge Connectors suitable for Zebra ACSR to Zebra ACSR Per bay No. 5 5 c 32KV Line Bay -Rly Feeder bay 2 2 Insulators-20KN AF Per Bay No. 8 8 Single Suspension H/W & Acc.-Twin Zebra ACSR Per No. 2 2 Sign & seal of Bidder 2

22 Bay Spacers suitable for Twin Zebra ACSR (350mm Spacing) Per Bay No. 6 6 Fire Wedge Connectors suitable for Zebra ACSR to Zebra ACSR Per bay No. 0 0 d 32KV Jack Bus bay Insulators-20KN AF Per Bay No Single Suspension H/W & Acc.-Twin Zebra ACSR Per Bay No. 3 3 Spacers suitable for Twin Zebra ACSR (350mm Spacing) Per Bay No. 9 9 Fire Wedge Connectors suitable for Zebra ACSR to Zebra ACSR Per bay No Droppers (including required suspension string with hardware & accessories, if any) & Jumpers with Single Zebra ACSR conductor as per standards and approved drawings (It includes cost of insulators, hardwares & accessories, Fire Wedge Connectors, etc.all items required for satisfactory functioning. Any variation in quantities shall be absorbed by contractor)- Qty. per bay of 3phase a 32kV Line Bay-LA & CC Bays 2 2 Fire Wedge Connectors suitable for Zebra ACSR to Zebra ACSR Per bay No. 4 4 b 32kV Line Bay-LA,PT (Rly Feeder) Bays 2 2 Fire Wedge Connectors suitable for Zebra ACSR to Zebra ACSR Per bay No. 4 4 c 32/66KV Transformer Bay (32KV Side) - LA Bays 2 2 Fire Wedge Connectors suitable for Zebra ACSR to Zebra ACSR Per bay No. 9 9 d 32KV PT Bay Bays Fire Wedge Connectors suitable for Zebra ACSR to Zebra ACSR Per bay No. 9 9 D Supply and Erection of 66kV Switch Yard Material as per respective technical specifications and relevant special conditions suitable for Single Bus with Twin Zebra ACSR Conductor Stringing of bus for all the three phases with Twin Zebra ACSR conductor, insulators hardwares, spacers(suitable for 350mm spacing) at interval of 4.0 mtr complete as per relevant standards and approved 3 drawings.the scope includes the cost of insulators, hardwares, accessories, spacers etc.all items required for satisfactory operation. Any variation in quantities shall be absorbed by erection contractor)-qty. per span/bay of 3 phase a Main Bus with Mtr. Span including bus jumpers Span Insulators-90KN AF Per Span No Double Tension H/W & Acc. With Turn Buckle suitable for Twin Zebra ACSR cond. & 90KN Insulator disc Per Span No. 3 3 Sign & seal of Bidder 22

23 Double Tension H/W & Acc. Without Turn Buckle suitable for Twin Zebra ACSR cond. & 90KN Insulator No. 3 3 disc Per Span Spacers suitable for Twin Zebra ACSR (350mm Spacing) Per Span No. 2 2 b Main Bus with 25.0 Mtr. Span including bus jumpers Span Insulators-90KN AF Per Span No Double Tension H/W & Acc. With Turn Buckle suitable for Twin Zebra ACSR cond. & 90KN Insulator disc Per No. 3 3 Span Double Tension H/W & Acc. Without Turn Buckle suitable for Twin Zebra ACSR cond. & 90KN Insulator No. 3 3 disc Per Span Spacers suitable for Twin Zebra ACSR (350mm Spacing) Per Span including Bus jumpers No. 8 8 c Main Bus with Mtr. Span including bus jumpers Span Insulators-90KN AF Per Span No Double Tension H/W & Acc. With Turn Buckle suitable for Twin Zebra ACSR cond. & 90KN Insulator disc Per No. 3 3 Span Double Tension H/W & Acc. Without Turn Buckle suitable for Twin Zebra ACSR cond. & 90KN Insulator No. 3 3 disc Per Span Spacers suitable for Twin Zebra ACSR (350mm Spacing) Per Span No. 2 2 d Transformer flyover bus with Mtr. Span bay 2 2 Insulators-90KN AF Per Span No Double Tension H/W & Acc. With Turn Buckle suitable for Twin Zebra ACSR cond. & 90KN Insulator disc Per No. 3 3 Span Double Tension H/W & Acc. Without Turn Buckle suitable for Twin Zebra ACSR cond. & 90KN Insulator No. 3 3 disc Per Span Spacers suitable for Twin Zebra ACSR (350mm Spacing) Per Span No Stringing of Earth Wire with 7/3.5 GS wire with required hardwares & accessories (including spike reqd, if any) etc. complete as per standards and approved drawings for the shown span. (It includes cost of hardwares & accessories etc. all items for satisfactory functioning. Any variation in quantities should be absorbed by erection contractor) a Main Bus with 25.0 Mtr. Span Span 2 2 Earthwire Access.- Suitable for 7/3.5 GS per span No. 2 2 b Main Bus with Mtr. Span Span 2 2 Earthwire Access.- Suitable for 7/3.5 GS per span No. 2 2 c Line Bus with 7.3 Mtr. Span Span 5 5 Earthwire Access.- Suitable for 7/3.5 GS per span No. 2 2 e Transformer flyover bus with Mtr. Span bay 3 3 Earthwire Access.- Suitable for 7/3.5 GS per span No. 2 2 Sign & seal of Bidder 23

24 Droppers (including required suspension string with hardware & accessories if any) & Jumpers with Single Moose ACSR conductor as per standards and 5 approved drawings. (It includes cost of insulators, hardwares & accessories etc. all items required for satisfactory functioning. Any variation in quantities shall be absorbed by erection contractor).-qty. per bay of 3phase a 66KV Line Bay bay 5 5 Insulators-90KN AF Per Bay No. 5 5 Single Suspension H/W & Acc. Suitable for Single Moose ACSR & 90KN Insulator disc- Per Bay No. 3 3 Fire Wedge Connectors suitable for Zebra ACSR to Moose ACSR Per bay No. 9 9 Fire Wedge Connectors suitable for Panther/Dog ACSR to Moose ACSR Per bay No. 3 3 Droppers (including required suspension string with hardware & accessories if any) & Jumpers with Single Zebra ACSR conductor as per standards and approved 6 drawings. (It includes cost of insulators, hardwares & accessories etc. all items required for satisfactory functioning. Any variation in quantities shall be absorbed by erection contractor).-qty. per bay of 3phase a 32/66KV Transformer Bay- LA bay 2 2 Fire Wedge Connectors suitable for Zebra ACSR to Zebra ACSR Per bay No Droppers (including required suspension string with hardware & accessories if any) and Jumpering (equipment to equipment) with Twin Zebra ACSR conductor as per standards and approved drawings with provision of spacers suitable for 350mm spacing at 4.0 mtr interval. The scope includes the cost of accessories, spacers, fire wedge connectors etc.all items required for satisfactory operation. Any variation in quantities shall be absorbed by erection contractor - Qty. per bay of 3phase a 32/66KV Transformer Bay (66KV Side) bay 2 2 Insulators-90KN AF Per Bay No. 5 5 Single Suspension H/W & Acc.suitable for Twin Zebra ACSR Cond. And 90KN Insulator disc- Per Bay No. 6 6 Spacers suitable for Twin Zebra ACSR (350mm Spacing) Per Bay Fire Wedge Connectors suitable for Zebra ACSR to Zebra ACSR Per bay No No. 8 8 Remarks: Conductor & Earthwire for Stringing, wherever applicable, shall be provided by GETCO. Other Material are in scope of contractor. Sign & seal of Bidder 24

25 : A N N E X U R E - "A" : Supply of Major spares and devices Sr. No. Particulars Unit Quantity (A) DG set ( portable three phase 45V 0 KVA ) Set (B) Welding M/C: Input volt v(single/two phase), 50Hz, Set Insulation class A 200 Amp. : A N N E X U R E - "B" : Supply of Instruments Sr. No. Particulars Unit Quantity Computer set with UPS dust cover etc as per technical specifications ( for officer in charge) 2 A-4 size mono lasor printer as per technical specifications.( for officer In charge) 3 Earth Resistance Tester Digital GE-OHM C make (made in Germany) model no EN 6557/VDE 043 or updated version with better features. 4 Clip on meter AC/DC V/I/OHM V, 0-25A Meco/Rishabh/Motwane Battery backup 5 Motor and manual Operated Oil BDV testing Kit Motwanemake with 0-00kV range, auto cut off feature, with standard ball -cup and measuring gauge as per IS. Set Set Nos. Nos. Nos. Sign & seal of Bidder 25

26 A N N E X U R E - "C" Supply of Tools & Tackles Sr. No. Particulars Unit Quantity Earthing Rod (Highly insulated FRP telescopic Earthing/ Discharge Rod. Suitable for 32KV, 8 ft, 3 sections) with cable. 2 Spanner [Ring, Fixed, Box] Fix=0x,2x3,4x5,,6x7Ring=0x,2x3,4x5,6x7 Tubular=2x3,4x5,6x7,8x9 Screw driver=827i,927 Nut driver= 7mm Nos. 9 Nos. 3 3 Steel Roller - Size " Nos. 0 4 Aluminium Roller - Size 4" Nos. 5 5 one/two/three Wheel pulley - Size " Nos. 2 6 Winch Machine with Handle - 05 Ton Capacity Nos. 2 7 Hydraulic Press Machine Kgs Nos. 2 8 Hand drill Wolf or Equi. Make 240 V, hole capacity Capacity :- Hole up to 3 mm, Single Phase Nos. 9 Drill Machine - 5/8" Dia Standing Drill machine having 3 Feet Pillar & suitable for making Holes up to ¾. Motor - Lubi or equi, -Ph, -HP. Drill Chuck, Arbour, V Belt & Switch Nos. 2 0 Chain pulley block - 5 tonne capacity Nos. 2 Wire rope pully block - 02 Tonne Nos. 2 Tent- Standard quality water proof Tent made from H.DP.E. Materials with 5 Nos of bamboos Rods and having capacity of 8 to 0 Person to stay & size 0 Ft x 0Ft Multipurpose Nos. 3 Water pump Set - 5 HP Nos. 2 4 Water pump Set - HP Nos. 2 5 Crowbar -.5 Mtr Nos. 6 Crowbar -.0 Mtr Nos. 7 Heavy hammer - 0Kg Nos. 8 Pickaxe ( Trikam) - 2 '' width with Handle Nos. 5 9 Pawda[shovel] - 2 '' width with Handle Nos Axe (Kuhadi) with Handle Nos. 5 2 Sythe (Dharia) with Handle Nos Tar Poline (Tad Patri) Nos Nylon Rope - 0.5" Dia -00 mtrs Bundle Sign & seal of Bidder 26

27 24 Nylon Rope 0.75" Dia - 00 mtrs Bundle 25 Nylon Rope - " Dia - 00 mtrs Bundle 26 Aluminium Ladder - 5 ft. Aluminium folding factory ladder (Heavy duty) made from high tensile aluminium alloy design no 52 AFFL 5 Ft height (4.56 mtrs) specification section= 5/8 X./4 Steps= 5/8 X./4 2 Center to Center Nos Telescopic aluminum ladder(3 sections) with platform - 25 ft Nos. 28 Oil Drum Lifter & Oil Hand pump Nos. 29 Cable Drum Lifter Nos. 30 Cable Drum Nos. 3 Turn Table - Cable Drum Nos. 32 Hand cart - 2 tonne capacity With steel body Nos. 33 Hot air blower Small Capacity =.5m3/min, Nos. Big Capacity =2.0m3/min 34 Vacuum cleaner - Tornedo/Ureka Forbes or equivalent. Nos. 35 Wooden sleeper - Pine wood sleeper of size 0 X5 X0 feet long Nos. 50 SAFETY TOOLS Safety belt Full body harness Nos. 5 2 Halmet with ISI mark of reputed make Nos. 0 3 Hand Gloves Hand gloves of quality as per Is certification 4770 & test potential 7500Volt Nos. 6 4 Gum boot (Pair) - Size 8,9,0. - Standard make Nos. 3 Switch Yard / Line Clamp connectors (SPARE) Fire Wedge Connector suitable for Moose to Moose Conductor Nos. 6 2 Fire Wedge Connector suitable for ACSR Zebra to ACSR Moose Conductor Nos. 6 3 Fire Wedge Connector suitable foracsr Zebra to ACSR Zebra Conductor Nos. 6 4 Spacer for32kv Nos. 0 5 Spacer for 66KV Nos. 0 6 Clamps for each type of breaker Nos. 6 7 CT Clamp - 32 & 66KV Nos. 6 8 Joint sleeve- ACSR Zebra conductor Nos. 6 9 Joint sleeve- ACSR Moose conductor Nos. 0 0 Deadend hardware for Moose ACSR conductor Nos. 6 Deadend hardware for ACSR Zebra conductor Nos. 6 2 Isolator clamp for 32KV Nos. 3 Sign & seal of Bidder 27

28 3 Isolator clamp for 66KV Nos. 3 4 Isolator L-clamp- for 32KV Nos. 3 5 Isolator L-clamp- for 66KV Nos. 3 6 Palm connector for 32 &66KV Nos. 6 8 Repair Sleeve for ACSR Moose Conductor Nos. 5 9 Repair Sleeve for ACSR Zebra Conductor Nos PG clamp for ACSR Moose conductor Nos. 5 2 PG clamp for ACSR Zebra conductor Nos Isolator contacts for each type / make of isolator Nos PI Clamp suitable for ACSR Moose Conductor Nos PI Clamp suitable for ACSR Zebra Conductor Nos Earth wire clamp Nos Comealong clamp suitable for ACSR Moose conductor Nos Comealong clamp suitable for ACSR Zebra conductor Nos. 3 Hardware - fasteners 6/7, 03" Bolt nut Nos /9, 04" Bolt nut Nos /9, 03 " Bolt nut Nos /23, 2.5" Bolt nut Nos /23, 3" Bolt nut Nos. 50 Illumination Luminaries Energy efficient decorative Tube (spare as provided in control room illumination design) Nos. 20 Energy Efficient tube (spare as provided in switch yard illumination design) Nos CFL (spare as provided in illumination design) Nos LED indicating Lamps 22.5 Nos. 20 Display Boards and others Single line diagram drawn with radium paint suitable decorated on a board of approx size of 20x90 mm suitable designed Nos. thickness with fixing arrangement in control room wall. 2 Key board with hook for different keys of each equipments/panels/cubicles with SLD drawn with color approx size 2'x2' Nos. Sign & seal of Bidder 28

29 Specification: 3 core Shielded communication cables with twisted pair (a) 20 AWG standard tined copper (b) Capacitor of cables < 70 PF/M (c) Size of conductor 7/0.30 (d) Voltage grade 600V (e) Polyethylene insulator having characteristic impedance 20 OHM Specification: Converter Module : RS 485 to RS 232 converter Specification: The ADAM RS 485 to RS 232 converter Shall be powered with any unregulated power source between +0 to + 30 VDC. Their industrial grade plastic shells shall be mounted on a DIN rail, panel or in a piggybacked stack. Shall require to have following Features: Automatic internal RS-485 bus supervision No external flow control signals required for RS-485 Minimum 3000Vdc isolation protection Transient suppression on RS-485 data lines Baud rate up to 5.2 Kbps Networking up to 4000 feet. Reserved space for termination resistors Power and data flow indicator for troubleshooting Power requirement : +0 to +30 Vdc Mounts easily on DIN-rail or Panel Specifications: UPower requirements Unregulated +0 to +30 Vdc with protection from power reversals CASE: ABS with captive mounting hardware. Accessories ( To be supplied) : NYLON DIN-rail mounting Adapter SECC Panel Mounting Bracket Plug-In screw terminal wiring : Accepts AWG -#2 to #22 (0.5 to 2.5 mm) wires Baud rate (bps): Sign & seal of Bidder 29