MX2 INVERTER. Born to drive machines. Omron Quality with a capital Q High programming functionality Built-in safety

Transcription

1 MX2 INVERTER Born to drive machines»» Omron Quality with a capital Q High programming functionality» Built-in safety

2 Harmonised motor and machine control The MX2 is specifically designed to drive machines. It has been developed to harmonise advanced motor and machine control. Thanks to its advanced design and 200% starting torque Near stand-still operation (0.5 Hz) Smooth control of high inertia loads Control of fast cyclic loads MOTOR CONTRO MCHINE CONTRO algorithms the MX2 provides smooth control down to zero speed, plus precise operation for fast cyclic operations and torque control capability in open loop. The MX2 also gives Torque control in open loop Ideal for low to medium torque applications Can replace a flux vector or servo Safety inside Conforms to safety norm ISO CT3 performance level PD 2 Safety inputs you comprehensive functionality for machine drive in suitable systems External device monitoring (EDM) control such as positioning, speed synchronisation and logic programming. The MX2 is fully integrated within the Omron smart automation platform. The MX2 is the Special motors Permanent magnet motors High speed motors up to 1000 Hz ogic programming Flow chart programming Intuitive up to 5 tasks in parallel child of a true leader in machine automation. One parameter auto-tuning Just by entering the kw rating of the motor the MX2 gives you smooth Positioning Up to 8 pre-set positions with and safe operation Homing Speed synchronisation Integrated in the Omron Smart utomation CX-Drive programming tool connected via integrated USB port on MX2. Modbus RS485 built-in Option units for EtherCT, Profibus, DeviceNet, M-II and more

3 100% Control % risk! High starting torque and torque control capability in open loop mode give you full control of your machine dynamics and performance. Options for all of the major fieldbus systems and a 24 VDC external supply keeps you in full control of your machine operation. Safety is embedded in the MX2, according to ISO , Cat 3, with two safety inputs and an External Device Monitoring (EDM) output. No external contactors on the motor side are required, meaning simpler wiring for the user. Torque 220 VC Safety redundancy input Dual safety input chain 24 VDC Torque response Torque reference Speed EDM output EDM safety output chain Torque master The MX2 delivers 200% starting torque near stand-still (0.5 Hz) and can operate in torque control in open loop mode. This allows the MX2 to be used in applications where closed loop C vector drives were previously used. Easy network integration Built-in RS485 Modbus communications and the possibility for integration in standard industrial networks, such as Dnet, Profibus, CNopen, CompoNet, M-II or EtherCat makes the MX2 exceptionally easy to integrate. External 24 VDC for continuous operation With no additional hardware, a 24 VDC connection to the MX2 ensures the CPU is always in control, even if the main input is removed. This feature is vital in providing a controlled stop in emergency situations and in keeping the network communications operating. Safety embedded; ISO , cat 3 Dual contactors at the output of the inverter are no longer required. Direct connection to a safety controller ensures compliance to ISO , cat 3. EDM monitoring output n External Device Monitoring (EDM) output confirms the safety status of the inverter, saving you the cost and wiring of external devices to carry out the same function. Direct integration into the safety circuit MX2 inverters can fit easily into the safety circuit. The safety inputs can be linked from one inverter to another without additional safety relays.

4 Position and run! Program and play! The MX2 is a drive and position controller in one, ideal for modular machines where moderate positional accuracy is required. Speed synchronisation is also possible, with no additional programming required. The MX2 gives you the power to create smart solutions using PC functionality, as standard. Via an intuitive flow chart programming tool, you can create programs with up to 1000 lines of code and with 5 tasks running in parallel. Speed synchronisation Positioning functionality Free to program With no external hardware required, and via standard parameter settings, speed synchronisation can be achieved. The MX2 will act as a speed follower to an external pulse generator/ encoder signal up to 32 KHz. Specially developed application functionality enables the MX2 to solve simple positioning tasks without the need for an external controller. Up to 8 positions, plus home, can be selected by the user, and furthermore, the MX2 can be switched between speed and position mode. Intuitive and user friendly flow chart programming Integrated in CX-Drive Up to 1000 lines in a program 5 tasks can run in parallel Speed X00 X01

5 MX2 Born to drive machines Current vector control High starting torque: 200% at 0.5Hz Double rating VT 120%/1min and CT 150%/1min Speed range up to 1000 Hz IM & PM motor control Torque control in open loop vector Positioning functionality Built-in application functionality (i.e. Brake control) User programmable as standard Safety embedded compliant with ISO (double input circuit and external device monitor EDM) USB port for PC programming 24 VDC backup supply for control board Fieldbus communications: Modbus, DeviceNet, Profibus, Componet, Ethercat, M-II and CanOpen PC configuration tool: CX-Drive RoHS, CE, cuus Ratings 200 V Class single-phase 0.2 to 2.2 kw 200 V Class three-phase 0.2 to 15.0 kw 400 V Class three-phase 0.4 to 15.0 kw System configuration Power Supply MCCB USB Cable CX-Drive CX-One Input C Reactor Remote Operator Extansion Cable CD 5 lines Remote Operator Filter Communication Option Board MX2 Braking Resistor Choke DC Reactor Motor Output C Reactor Ground 8 Frequency inverters

6 Specifications Type designation MX2B002-E MX2 series : Standard specs Voltage: B: Single-phase 200 VC 2: Three-phase 200 VC 4: Three-phase 400 VC E: Europe standard Max. applicable motor output 002: 0,2 kw ~ 150: 15,0 kw 200 V class Motor kw 2 Output characteristics Power supply Single-phase: MX2@ B001 B002 B004 B Three phase model use forced-air-cooling but single phase model is self cooling. 2. Based on a standard 3-Phase standard motor. 3. bove 400Hz with some function limitation. B015 B Three-phase: MX2@ For VT setting For CT setting VT Inverter capacity kv 200 CT VT CT Rated output current () at VT Rated output current () at CT Max. output voltage Proportional to input voltage: V Max. output frequency 1000 Hz 3 Rated input voltage and frequency Single-phase V 50/60 Hz 3-phase V 50/60 Hz llowable voltage fluctuation -15%..+10% llowable frequency fluctuation 5% Braking torque t short-time deceleration t capacitor feedback 100%: <50Hz 50%: <60Hz 70%: <50Hz 50%: <60Hz pprox 20% - Cooling method Self cooling Forced-air-cooling 400 V class Motor kw 1 Output characteristics Power supply Three-phase: MX2@ For VT setting For CT setting VT Inverter capacity kv 380 CT VT CT Rated output current () at VT Rated output current () at CT Max. output voltage Proportional to input voltage: V Max. output frequency 1000 Hz 2 Rated input voltage and frequency 3-phase V 50/60 Hz llowable voltage fluctuation -15%..+10% llowable frequency fluctuation 5% Braking torque t short-time deceleration *3 t capacitor feedback 1. Based on a standard 3-Phase standard motor. 2. bove 400Hz with some function limitation. 100%: <50Hz 50%: <60Hz 70%: <50Hz 50%: <60Hz Cooling method Self cooling Forced-air-cooling - MX2 9

7 Specifications Commom specifications Control functions Functionality Protection functions mbient conditions Model number Specifications Control methods Phase-to-phase sinusoidal pulse with modulation PWM (Sensorless vector control, V/F) Output frequency range Hz (with restrictions above 400Hz) Digital set value: ±0.01% of the max. frequency Frequency precision nalogue set value: ±0.2% of the max. frequency (25 ±10 ºC) Digital set value: 0.01 Hz Resolution of frequency set value nalogue set value: 1/1000 of maximum frequency Resolution of output frequency 0.01Hz Starting torque 200% / 0.5Hz Dual rating: Overload capability Heavy duty (CT): 150% for 1 minute Normal Duty (VT): 120% for 1 minute Frequency set value 0 to 10 VDC (10KΩ), 4 to 20m (100Ω), RS485 Modbus, Network options V/f Characteristics Constant/ reduced torque, free V/f FW (forward run command), RV (reverse run command), CF1~CF4 (multi-stage speed setting), JG (jog command), DB (external braking), SET (set second motor), 2CH (2-stage accel./decel. command), FRS (free run stop command), EXT (external trip), USP (startup function), CS (commercial power switchover), SFT (soft lock), T (analog input selection), RS (reset), PTC (thermistor thermal protection), ST (start), STP (stop), F/R (forward/reverse), PID (PID disable), PIDC (PID reset), UP (remote control up function), DWN (remote control down function), UDC (remote control data clear), OPE (operator control), SF1~SF7 (multi-stage speed setting; bit operation), OR (overload restriction), T (torque limit enable), TRQ1 (torque limit Inputs signals changeover1), TRQ2 (torque limit changeover2), BOK (Braking confirmation), C (D cancellation), PCR (position deviation clear), DD (add frequency enable), F-TM (force terminal mode), TR (permission of torque command input), KHC (Cumulative power clear), MI1~MI7 (general purpose inputs for EzSQ), HD (analog command hold), CP1~CP3 (multistageposition switches), OR (limit signal of zero-return), ORC (trigger signal of zero-return), SPD (speed/position changeover), GS1~GS2 (STO inputs, safety related signals), 485 (Starting communication signal), PRG (executing EzSQ program), HD (retain output frequency), ROK (permission of run command), EB (rotation direction detection of B-phase), DISP (display limitation), OP (option control signal), NO (no function) RUN (run signal), F1~F5 (frequency arrival signal), O,O2 (overload advance notice signal), OD (PID deviation error signal), (alarm signal), OTQ (over/under torque threshold), UV (under-voltage), TRQ (torque limit signal), RNT (run time expired), ONT (power ON time expired), THM (thermal warning), BRK (brake release), BER (brake error), ZS (0Hz detection), DSE (speed deviation excessive), POK (positioning completion), ODc (analog voltage input disconnection), OIDc (analog current input disconnection), FBV (PID second stage output), NDc (network disconnect detection), OG1~OG3 (ogic output signals), WC (capacitor life warning), WF (cooling fan warning), FR (starting contact), OHF (heat sink overheat warn- Output signals ing), OC (ow load), MO1~MO3 (general outputs for EzSQ), IRDY (inverter ready), FWR (forward operation), RVR (reverse operation), MJ (major failure), WCO (window comparator O), WCOI (window comparator OI), FREF (frequency command source), REF (run command source), SETM (second motor in operation), EDM (STO (safe torque off) performance monitor), OP (option control signal), NO (no function) Free-V/f, manual/automatic torque boost, output voltage gain adjustment, VR function, reduced voltage start, motor data selection, auto-tuning, motor stabilization control, reverse running protection, simple position control, simple torque control, torque limiting, automatic carrier frequency reduction, energy saving operation, PID function, non-stop operation at instantaneous power failure, brake control, DC injection braking, dynamic braking (BRD), frequency upper and lower limiters, jump frequencies, curve accel and decel (S, U, inversed U,E-S), 16-stage speed profile, fine adjustment of start Standard functions frequency, accel and decel stop, process jogging, frequency calculation, frequency addition, 2-stage accel/decel, stop mode selection, start/end freq., analog input filter, window comparators, input terminal response time, output signal delay/hold function, rotation direction restriction, stop key selection, software lock, safe stop function, scaling function, display restriction, password function, user parameter, initialization, initial display selection, cooling fan control, warning, trip retry, frequency pull-in restart, frequency matching, overload restriction, over current restriction, DC bus voltage VR nalogue inputs 2 analogue inputs 0 to 10V (10KΩ), 4 to 20m (100Ω) Pulse train input terminal 0 to 10V (up to 24V), up to 32KHz ccel/decel times 0.01 to s (line/curve selection), 2nd accel/decel setting available Status indicator ED s Run, Program, larm, Power, Hz, mps Display Digital operator: vailable to monitor 32 items: frequency reference, output current, output frequency... Motor overload protection Electronic Thermal overload relay and PTC thermistor input Instantaneous overcurrent 200% of rated current Dual rating: Overload Heavy duty (CT): 150% for 1 minute Normal Duty (VT): 120% for 1 minute Overvoltage 800V for 400V type and 400V for 200V type Undervoltage 345V for 400V type and 172.5V for 200V type Momentary power loss Following items are selectable: larm, decelerates to stop, decelerates to stop with DC bus controlled, restart Cooling fin overheat Temperature monitor and error detection Stall prevention level Stall prevention during acceleration/deceleration and constant speed Ground fault Detection at power-on Power charge indication On when power is supplied to the control part Degree of protection IP20, Varnish coating on PCB mbient humidity 90% RH or less (without condensation) Storage temperature -20 ºC..+65 ºC (short-term temperature during transportation) mbient temperature 10 C to 40 C Installation Indoor (no corrosive gas, dust, etc.) Installation height Max m Vibration 5.9 m/s 2 (0.6G), 10 to 55 Hz 10 Frequency inverters

8 R f R l w Q?@ h m u d q s d q r s n o q d r d s q t m g š o v q ` k l ` o q f R f R l w Q q t m r x r c q h u d?@ h m u d q s d q r s n o q d r d s q t m g š o v q ` k l ` o q f R f R l w Q?@ h m u d q s d q q t m q t m o v q g š ` k l ` o q f r s n o q d r d s Dimensions W1 W φ 4.5 W W1 φ 2-d W W1 φ 2-d q t m H1 H H1 H H1 H 5 t t D Figure 1 D Figure 2 D1 D Figure 3 2,6 D1 D2 D1 D2 Dimensions in mm Voltage class Inverter model MX2@ Figure W W1 H H1 t D D1 D2 d Weight (KG) B B Single-phase 200 V Three-phase 200 V Three-phase 400 V B B B B Rasmi footprint Filters 1x200 V 3x200 V 3x400 V Rasmi model Dimensions W H X Y M X-FIM1010-RE M4 X-FIM1014-RE M4 X-FIM1024-RE M4 X-FIM2010-RE M4 X-FIM2020-RE M4 X-FIM2030-RE M4 X-FIM2060-RE M5 X-FIM2080-RE M5 X-FIM2100-RE M6 X-FIM3005-RE M4 X-FIM3010-RE M4 X-FIM3014-RE M4 X-FIM3030-RE M5 X-FIM3050-RE M5 MX2 11

9 Option board 30.7 Input C Reactor Voltage 200V 400V DC Reactor Output C Reactor Dimensions B2 C2 D E F Weight Kg X-RI DE X-RI DE X-RI DE X-RI DE X-RI DE X-RI DE X-RI DE X-RI DE Voltage Dimensions Weight B C D E F G H Kg X-RC DE X-RC DE X-RC DE X-RC DE 1.60 X-RC DE V X-RC DE X-RC DE X-RC DE X-RC DE X-RC DE X-RC DE X-RC DE X-RC DE X-RC DE X-RC DE V X-RC DE X-RC DE X-RC DE X-RC DE Voltage 200V Dimensions Weight B2 C2 D E F Kg X-RO DE X-RO DE X-RO DE X-RO DE X-RO DE X-RO DE X-RO DE X-RO DE X-RO DE Frequency inverters

10 Voltage 400V Dimensions Weight B2 C2 D E F Kg X-RO DE X-RO DE X-RO DE X-RO DE X-RO DE X-RO DE X-RO DE Chokes D diameter Motor KW Dimensions Weight Kg W H X Y m X-FER2102-RE 21 < X-FER2515-RE 25 < X-FER5045-RE 50 < W Y X Ø m H Ø d Resistor Dimensions X-REM00K1200 Fig 1 Fig 2 Fig 3 Fig 4 Type Fig. Dimensions Weight H M I T KG X-REM00K1400-IE X-REM00K2070-IE X-REM00K2120-IE X-REM00K2200-IE X-REM00K4075-IE 1 X-REM00K4035-IE X-REM00K4030-IE X-REM00K5120-IE X-REM00K6100-IE X-REM00K6035-IE X-REM00K9070-IE X-REM00K9020-IE X-REM00K9017-IE X-REM01K9070-IE X-REM01K9017-IE X-REM02K1070-IE X-REM02K1017-IE 4 X-REM03K5035-IE X-REM03K5010-IE MX2 13

11 Standard connections Breaker, MCCB or GFI Power source, 3-phase or 1-phase, per inverter model Thermistor Meter Meter Intelligent inputs, 7 terminals NOTE: For the wiring of intelligent I/O and analog inputs, be sure to use twisted pair/ shielded cable. ttach the shielded wire for each signal to its respective common terminal at the inverter end only. Input impedance of each intelligent input is 4.7kΩ Forward Short bar (Source type) GND for logic inputs nalog reference 0~10VDC 4~20m Pulse train input 24Vdc 32kHz max. GND for analog signals R (1) S (2) T N(3) 24V P /GS1 4/GS2 5/PTC 6 7/EB PC EO M H O OI E Input circuits MX2 [5] configurable as discrete input or thermistor input pprx.10kω pprx.100ω + - Output circuit Termination resistor (200Ω) (Change by slide switch) 10Vdc RS485 transceiver RS485 transceiver USB transceiver Option port controller U(T1) V(T2) W(T3) PD/+1 P/+ RB N/ /EDM Open collector output Freq. arrival signal oad 12 oad CM2 SP SN Brake resistor (optional) Relay contacts, type 1 Form C + - GND for logic outputs Serial communication port (RS485/ModBus) RJ45 port (Optional operator port) USB (mini-b) port (PC communication port) USB power: Self power Option port connector Motor DC reactor (optional) Braking unit (optional) Terminal Block Specifications Terminal Name Function (signal level) R/1, S/2, T/3 Main circuit power supply input Used to connect line power to the drive. Drives with single-phase 200 V input power use only terminals R/1 and N (T/3), terminal S/2 is not available for these units U/T1, V/T2, W/T3 Inverter output Used to connect the motor PD/+1, P/+ External DC reactor terminal Normally connected by the short-circuit bar. Remove the short-circuit bar between +1 and P/ +2 when a DC reactor is connected. P/+, N/- Regenerative braking unit terminal Connect optional regenerative braking units (If a braking torque is required) P/+, RB Braking resistor terminals Connect option braking resistor (if a braking torque is required) Grounding For grounding (grounding should conform to the local grounding code.) 14 Frequency inverters

12 Control Circuit Type No. Signal name Function Signal level PC Intelligent input common Source type: connecting [P24] to [1]-[7] turns inputs ON Sink type: connecting [] to [1]-[7] turns inputs ON - P24 Internal 24 VDC 24 VDC, 30m 24VDC, 30m Digital input signals 1 Multi-function Input selection 1 Factory setting: Forward/ Stop 2 Multi-function Input selection 2 Factory setting: Reverse/ Stop 3/ST1 Multi-function Input selection 3 / safe stop input 1 Factory setting: External trip 4/ST2 Multi-function Input selection 4 / safe stop input 2 Factory setting: Reset 5/PTC Multi-function Input selection 5 / PTC thermistor input Factory setting: Multi-step speed reference 1 6 Multi-function input selection 6 Factory setting: Multi-step speed reference 2 27 VDC max 7/EB Multi-function input selection 7 / Pulse train input B Factory setting: Jog Pulse train nalog input signal Digital output signals Multi-function Input selection common (in upper row) E Pulse train input Factory setting: Speed reference EO Pulse train output D frequency H Frequency reference power supply 10 V DC 10m max O Voltage frequency reference signal 0 to 10V DC (10KΩ) OI Current frequency reference signal 4 to 20m (250Ω) Frequency reference common (bottom row) -- 11/EDM Discrete logic output 1 / EDM output Factory setting: During Run 12 Discrete logic output 2 Factory setting: Frequency arrival type 1 CMD GND logic output Relay commom contact Relay contact, normally open Relay contact, normally closed Factory setting: larm signal Under normal operation 1-0 Closed 2-0 Open 32KHz max 5 to 24VDC 10VDC 2m 32KHz max 27 VDC, 50m max EDM based on ISO R load 250VC VDC 3.0 I load 250VC VDC 0.7 Monitor Signal M nalog voltage output Factory setting: D frequency 0 to 10VDC 1m Comms Side by side mounting SP Serial communication terminal SN RS485 Modbus communication Enclosure Inverter heat loss Three-phase 200 V class Model MX VT Inverter 200 CT capacity kv 240 VT CT Rated current () VT Rated current () CT Total heat loss Efficiency at rated load Cooling Method Self cooling Forced-air-cooling MX2 15

13 Single-phase 200 V class Inverter capacity kv Model MX2 B001 B002 B004 B007 B015 B V VT V CT V VT V CT Rated current () VT Rated current () CT Total heat loss Efficiency at rated load Cooling Method Self cooling Forced-air-cooling Three-phase 400 V class Inverter capacity kv Model MX V VT V CT V VT V CT Rated current () VT Rated current () CT Total heat loss Efficiency at rated load Cooling Method Self cooling Forced-air-cooling Input C Reactor C reactor MX2 Power supply MCCB U X R/1 V Y S/2 W Z T/3 3 phase 200 V class 400 V class Current value Inductance Max. applicable Current value mh motor output kw 1.5 X-RI DE X-RI DE X-RI DE X-RI DE X-RI DE X-RI DE X-RI DE X-RI DE Max. applicable motor output kw Inductance mh DC Reactor Power supply MCCB R/1 MX2 S/2 T/3 +1 P/ V class 400 V class Current value Inductance mh Max. applicable motor output kw Current value 0.2 X-RC DE X-RC DE X-RC DE X-RC DE X-RC DE X-RC DE X-RC DE X-RC DE X-RC DE X-RC DE X-RC DE X-RC DE X-RC DE X-RC DE X-RC DE X-RC DE X-RC DE X-RC DE X-RC DE X-RC DE Max. applicable motor output kw Output C Reactor DC reactor Inductance mh 200 V class 400 V class Max. applicable Current value Inductance Max. applicable Current value Inductance motor output kw mh motor output kw mh 0.4 X-RO DE X-RO DE X-RO DE X-RO DE X-RO DE X-RO DE X-RO DE X-RO DE X-RO DE X-RO DE X-RO DE X-RO DE X-RO DE X-RO DE X-RO DE X-RO DE Frequency inverters

14 Ordering information Power Supply MCCB B USB Cable E CX-Drive CX-One Input C Reactor Filter B Remote Operator Extansion Cable C Communication option B CD 5 lines Remote Operator MX2 D Braking Resistor Choke Motor DC Reactor Output C Reactor Ground MX2 Voltage class Single-phase 200 V Three-phase 200 V Three-phase 400 V Specifications Model Constant torque Variable torque Max motor kw Rated current Max motor kw Rated current Standard MX2-B001-E MX2-B002-E MX2-B004-E MX2-B007-E MX2-B015-E MX2-B022-E MX E MX E MX E MX E MX E MX E MX E MX E MX E MX E MX E MX E MX E MX E MX E MX E MX E MX E MX E MX E MX E MX2 17

15 ine filters Inverter Voltage Model 1-Phase 200 VC 3-Phase 200 VC 3-Phase 400 VC ine filter Rasmi Rated current () B001 / B002 / B004 X-FIM1010-RE 10 B007 X-FIM1014-RE 14 B015 / B022 X-FIM1024-RE / 2002 / 2004 / 2007 X-FIM2010-RE / 2022 X-FIM2020-RE X-FIM2030-RE / 2075 X-FIM2060-RE X-FIM2080-RE X-FIM2100-RE / 4007 X-FIM3005-RE / 4022 / 4030 X-FIM3010-RE X-FIM3014-RE / 4075 X-FIM3030-RE / 4150 X-FIM3050-RE 50 Input C Reactors Inverter C Reactor Voltage Model MX2-@ 2002 / 2004 / 2007 X-RI DE 3-Phase 200 VC 1-Phase 200 VC 3-Phase 400 VC 2015 / 2022 / 2037 X-RI DE 2055 / 2075 X-RI DE 2110 / 2150 X-RI DE B002 / B004 B007 Under development B015 / B / 4007 / 4015 X-RI DE 4022 / 4030 / 4040 X-RI DE 4055 / 4075 X-RI DE 4110 / 4150 X-RI DE DC Reactors 200V single phase 200V 3-phase 400V 3-phase Inverter DC Reactor Inverter DC Reactor Inverter DC Reactor MX2-B001 MX MX X-RC DE X-RC DE X-RC DE MX2-B002 MX MX X-RC DE MX2-B004 X-RC DE MX X-RC DE MX X-RC DE MX2-B007 X-RC DE MX X-RC DE MX X-RC DE MX2-B015 X-RC DE MX X-RC DE MX X-RC DE MX2-B022 X-RC DE MX X-RC DE MX X-RC DE MX X-RC DE MX X-RC DE MX X-RC DE MX X-RC DE - MX X-RC DE MX X-RC DE MX X-RC DE MX X-RC DE MX X-RC DE - Chokes Model Diameter Description X-FER2102-RE 21 For 2.2 KW motors or below X-FER2515-RE 25 For 15 KW motors or below X-FER5045-RE 50 For 45 KW motors or below Output C Reactor Inverter C Reactor Voltage Model MX2-@ 200 VC 400 VC 2001 / 2002 / 2004 B001 / B002 / B /B / B / B / 4007 / / X-RO DE X-RO DE X-RO DE X-RO DE X-RO DE X-RO DE X-RO DE X-RO DE X-RO DE X-RO DE X-RO DE X-RO DE B ccessories Types Model Description Functions 3G3X-OP05 CD remote operator 5 ine CD remote operator with copy function, cable length max. 3m. Digital operator 3G3X-CJOP300-EE Remote operator cable 3 meters cable for connecting remote operator ccessories X-CUSBM002-E PC configuration cable Mini USB to USB connector cable 18 Frequency inverters

16 C Communication option boards Types Model Description Functions Used for running or stopping the inverter, setting or referencing parameters, and monitoring 3G3X-MX2-PRT Profibus option card output frequency, output current, or similar items through Profibus communications with the host controller. Communication options 3G3X-MX2-DRT 3G3X-MX2-ERT 3G3X-MX2-CRT 3G3X-MX2-M2 DeviceNet option card Ethercat option card CompoNet option card Mechatrolink II option card Under development 3G3X-MX2-CORT CanOpen option card D Braking unit, braking resistor unit Voltage 200 V (single-/ threephase) 400 V (threephase) Max. motor kw Inverter Braking resistor unit Inverter MX2@ Connectable Inverter mounted type Inverter mounted type min. (3 %ED, 10 sec max) Braking (10%ED, 10 sec max) torque % 3-phase 1-phase resistance Ω Type X- Resist Ω Type X- Resist Ω Braking torque % B REM00K1400-IE 400 REM00K1400-IE B B REM00K1200-IE REM00K1200-IE B REM00K2070-IE B REM00K4075-IE REM00K2070-IE B REM00K4035-IE REM00K4075-IE REM00K6035-IE REM00K9020-IE REM00K4035-IE REM01K9017-IE REM00K6035-IE REM02K1017-IE REM00K9017-IE REM03K5010-IE REM00K1400-IE 400 REM00K1400-IE REM00K1200-IE REM00K2200-IE REM00K2200-IE REM00K5120-IE REM00K2120-IE REM00K6100-IE REM00K9070-IE REM00K4075-IE REM01K9070-IE REM00K6100-IE REM02K1070-IE REM00K9070-IE REM03K5035-IE E Computer software Types Model Description Installation Software CX-drive Computer software Configuration and monitoring software tool CX-One Computer software Configuration and monitoring software tool DIMENSIONS SHOWN RE IN MIIMETERS. To convert millimeters into inches, multiply by To convert grams into ounces, multiply by Cat. No. I113E-EN-01 In the interest of product improvement, specifications are subject to change without notice. MX2 19

17 OMRON EUROPE B.V. Wegalaan 67-69, N-2132 JD, Hoofddorp, The Netherlands. Tel: +31 (0) Fax: +31 (0) ustria Tel: +43 (0) Germany Tel: +49 (0) Portugal Tel: Turkey Tel: Belgium Tel: +32 (0) Hungary Tel: Russia Tel: United Kingdom Tel: +44 (0) Czech Republic Tel: Italy Tel: South-frica Tel: +27 (0) Denmark Tel: Netherlands Tel: +31 (0) Spain Tel: Finland Tel: +358 (0) Norway Tel: +47 (0) Sweden Tel: +46 (0) France Tel: +33 (0) Poland Tel: +48 (0) Switzerland Tel: +41 (0) More Omron representatives utomation Systems Programmable logic controllers (PC) Human machine interfaces (HMI) Remote I/O Industrial PC s Software Motion & Drives Motion controllers Servo systems Inverters Control Components Temperature controllers Power supplies Timers Counters Programmable relays Digital panel indicators Electromechanical relays Monitoring products Solid-state relays imit switches Pushbutton switches ow voltage switch gear Sensing & Safety Photoelectric sensors Inductive sensors Capacitive & pressure sensors Cable connectors Displacement & width-measuring sensors Vision systems Safety networks Safety sensors Safety units/relay units Safety door/guard lock switches KPP_MX2_EN_INT01 lthough we strive for perfection, Omron Europe BV and/or its subsidiary and affiliated companies do not warrant or make any representations regarding the correctness or completeness of the information described in this document. We reserve the right to make any changes at any time without prior notice.