Water beverage solenoid valves and pumps. Water Management. Steam. Medical Welding. Coffee.

Transcription

1 1 Coffee Refrigertation ir-conditioning Steam Medical Welding Water Management Other-Industrial Water beverage solenoid valves and pumps

2 SOLENOID VLVE - quick connection for cold and hot water DISPENSING VLVE - 2 or 3 Inlet & 1 Outlet PERIPHERL PUMP FOR CRBONTOR SOLENOID PUMP CEME introduces its wide range of components dedicated to beverage system. These products have been designed by CEME with the aim of bringing innovative solutions and high quality components for Water Refrigerator system as well as Reverse Osmosis System for drinkable water. CEME has put in place its decades of experience in developing products in compliance with the most relevant norms related to potable water and food grade. 1 CEME, SOLENOID PUMPS ND VLVES Electro-pumps, solenoid valves, pressure switches, flow meters for a perfect fluid control Established in 1974, CEME is now a landmark of reference for industrial pumps and valves production in Italy and throughout the world. Over the years, the company has diversified its product range and their applications enriching its array of electro-pumps, solenoid valves, pressue switches, flow meters and other components to properly control the passage of any type of fluid: water, gas, steam, air. CEME is renowned for its technical engineering know-how, quality, flexibility and for the distinctive ability to develop innovative solutions for customers on the Italian and international markets. Technology needs control.

3 22 (44,9) 61 (59,7) V791-2/2 WY - NC V730 - NC 2 Inlet - 1 Outlet GENERL FETURES Hydraulic body: Thermoplastic P66 30%FV Inlet / Outlet: John Guest 4/6/8mm - 1/4 Operation: Direct cting GENERL FETURES Hydraulic body: Thermoplastic P66 30%FV Inlet / Outlet: John Guest 4/6/8mm - 1/4 Operation: Direct cting Working pressure: 0-8 bar Internal hole: 2,5mm Working pressure: 0-8 bar Internal hole: 2,5mm 2 3 (69,8) 60

4 (44,9) (59,7) V731 - NC 3 Inlet - 1 Outlet V796-2/2 way - NC GENERL FETURES GENERL FETURES Hydraulic body: Thermoplastic P66 30%FV Hydraulic body: Thermoplastic PP Inlet / Outlet: John Guest 4/6/8mm - 1/4 Inlet / Outlet: Quick connection VS Römer 4/6/mm Operation: Direct cting Operation: Direct cting 4 Working pressure: 0-8 bar Internal Hole: 2,5mm Orifice size Flow MOPD (bar)*** mm m 3 /h C DC ,5 47,9 56,4 INLET B Push-in fitting VS Roemer for Ø4 hose 19 Holes for fixing 46,6 (94,8) B ( 1 : 1 ) (fixing point) 17 16,5 N. 2 Ø3.2x Ø 3,5mm Hole 10 12

5 MTP 700 Peripheral pump MTP 700 Peripheral pump MIN TECHNICL FETURES WORKING CONDITIONS: Materials: mbient T : -10 / 50 C Pump Body: PEI reinforced, FD-NSF approved Fluid T : -10 / 80 C Shaft: Stainless steel ISI430FM Duty: 100% ED. Suitable for use with water and low corrosive / abrasive fl uid Impeller: PPS/PEEK reinforced, FD - NSF approved Max. allowable pressure: 12,5 barg ( 185 psi ) Mecanichal Seal: Ceramic/graphite/NBR -NSF pproved Note: The inlet pressure must be add on the above performance curve with the relative effect on the fl ow rate. Seals: EPDM or NBR FD approved NSF approving for the complete pump: in progress Suction Head: 150 mm. before priming, 2000 mm. after priming. In case of different conditions please contact our TEC dep. for a feasibility request 6 Motor: Standard: Single or Three phase induction motor 250W 230V 50Hz rpm IP00 with capacitor and thermal protection 0 C insulation class F/B, Fan cooled. Other voltages, frequencies and confi gurations are available, contact our TEC dep. for a feasibility request. Executions Standard: Horizontal installations with a 50cm of electrical cable and a G.3/8 Male, facing up. Other confi gurations are available, contact our TEC dep. for a feasibility request. balanced settable by-pass valve is also available ,5 10 OUT 127 IN By-pass adjustment screw psi barg CEME PUMP MTP700 PERFORMNCE CURVE 50Hz 60Hz 60Hz +3bar inlet PRESSURE ( 1 : 2 ) 2 90 = = L/h FLOW RTE gph N 2 G.3/8 NOTE: Hydraulic characteristics obtained with waters at 20 C at pump nominal speed. Working tolerance on Hydraulic and Electrical characteristics is ± 10%

6 EP 5 Solenoid pump EP 5 Solenoid pump Electrical insultaion class II Diode integreted (except for 24V) pprovals: VDE, IMQ, c Ul Voltages: 100V / 50-60Hz - 120V / 60Hz - 220V 50Hz - 230V 50Hz - 240V 50Hz - 24V 50-60Hz Pressure (bar) verage Flow Rate (cc/min) E4 E5 E7 E4R Description Body material Seal material Electrical connection Insulation class Technical data P66/POM NBR (OTHER MTERIL VILBLE ON REQUEST 6,3 x 0,8 fast-on terminal F Min 7 1/8" Gas O CH ,3 x 0,8 (x2) 74,5 4,5 O 13,5 O 13,2 4,5 O 7,2 54,3 55

7 10 CEME SP Uffici e Stabilimento Via Garibaldi, Carugate (MI) CEME ZHONGSHN CO.LTD Industrial Road, nr Xiaolan Town, Zhongshan City, Guangdong Province, P.R. China CEME US Curtis Blvd, nr Eastlake, OHIO Coffee Refrigertation ir-conditioning Steam Medical Welding Water Management Other-Industrial Tel Fax ceme@cemegroup.com Ph Fax Ph Fax Water beverage solenoid valves and pumps